Search Results

Search found 7742 results on 310 pages for 'bin packing'.

Page 201/310 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• How system services are started in 12.10?

  - by Salem

  One thing that always confused me in Ubuntu was how system services are started. I know that Ubuntu uses Upstart and supports SysV, but which one is used to start the services? This matters when you want a "manual" start for a service. For example, on my system i have files for the following services either in /etc/init.d/<service> (Upstart) and /etc/init/<service>.conf (SysV): acpid, mysql, networking, qemu-kvm, ufw, libvirt-bin So if i want to disable MySQL execution at startup, i must use the Upstart way or the SysV way to disable it? Also, how can i tell which of those is really used to start a generic service? Edit The really doubt here is not how disable/enable services using SysV/Upstart. What really confuses me is that some services seem to be defined (and enabled) in SysV and Upstart at the same time. Is there any precedence between them (like if mysql is enabled in both launch it using SysV)? Or can it be the case that one tool uses the other in background?

  Read the article

• virt-install says name is in use, but virsh list --all is empty. Where is virt-install finding this name?

  - by Jay _silly_evarlast_ Wren

  virt-install says name is in use, but virsh list --all says there is nothing. jrwren@delays:{%22}~ $ virt-install -d -n android -r 512 --disk android.qcow2 -s 4 -c /d/cd\ images/android-x86-2.2-generic.iso --vnc --noautoconsole [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:220) Launched with command line: /usr/bin/virt-install -d -n android -r 512 --disk android.qcow2 -s 4 -c /d/cd images/android-x86-2.2-generic.iso --vnc --noautoconsole [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:326) Requesting libvirt URI default [Thu, 05 Jul 2012 16:57:19 virt-install 23170] DEBUG (cli:328) Received libvirt URI qemu:///session [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:259) Requesting virt method 'default', hv type 'default'. [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:469) Received virt method 'hvm' [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (virt-install:470) Hypervisor name is 'kvm' [Thu, 05 Jul 2012 16:57:20 virt-install 23170] DEBUG (cli:950) --graphics compat generated: vnc [Thu, 05 Jul 2012 16:57:20 virt-install 23170] ERROR (cli:597) Guest name 'android' is already in use. (venv)jrwren@delays:{%22}~ $ sudo virsh -c qemu:///system list --all Id Name State ---------------------------------- Where is virt-install finding this name? edit: I should mention that LIBVIRT_DEFAULT_URI is not set.

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• when I type apt-get -f install, I get the error message

  - by gene

  xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. Also I can not upgrade my software, It said that the package system is broken, with detail information: The following packages have unmet dependencies: xserver-xorg-core: Depends: xserver-common (>= 2:1.11.4-0ubuntu10.8) but 2:1.11.4-0ubuntu10.8 is installed when I issue sudo apt-get update, the output seems fine the source is(sorry the output has too many links that I can not post in);http://archive.ubuntu.com Reading package lists... Done ====================== when I issue sudo apt-get dist-upgrade, the output is: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: xserver-xorg-core : Breaks: xserver-xorg-video-5 E: Unmet dependencies. Try using -f. ================== when I issue 'sudo apt-get -f install', the output is: dpkg: dependency problems prevent configuration of xserver-xorg-video-radeon: xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. xserver-xorg-video-radeon (1:6.12.1-0ubuntu2) provides xserver-xorg-video-5. dpkg: error processing xserver-xorg-video-radeon (--configure):dependency problems leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: xserver-xorg-video-radeon E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• How do I finish installing Sun JDK after cancelling out of the legal term screen?

  - by Ravi

  I am a newcomer to linux and have had lots of problems in installing java on my newly installed Ubuntu 11.10. I use a statistical programming environment called R and many of the packages there require java (the sun variety, I am told). I tried the following : sudo add-apt-repository ppa:ferramroberto/java sudo apt-get update sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts (after this, I wanted to continue with (but never got that far) : sudo apt-get install sun-java6-jdk After this, a window appeared with the heading, "Configuring jre", or something like that. Below was a long list of legal text about accepting Sun's terms. I did not know how to close this window (no obvious option like pressing return worked). After a long time, when nothing seemed to happen, I finally closed the window. After that, I could not open synaptic. I got the error message : dpkg was interrupted. You must manually run 'sudo dpkg --configure -a' I did this. But it does not help. I have java as a "broken" program. When I try to remove the program from synaptic, I get a message that I must reinstall it again.I do not know what I should do. I want to install jdk6. And also remove the open jdk which is still persistently present in my system. I tried the clean and purge command shown below. Next, I tried to remove the sun-java6-jre from synaptic. I get the following message :E: sun-java6-jre: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. When I tried to follow the procedure suggested in the related question (from the link suggested below), I get the following message on trying to install again :Could not mark all packages for installation or upgrade.The following packages have unresolvable dependancies. Make sure that all required repositories are added and enabled in the preferences. sun-java6-bin : Depends: sun-java6-jre but it is not going to be installed

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• dpkg in uninterruptible sleep

  - by Khaled

  I have several Ubuntu servers 10.04. Today, I tried to upgrade some packages on one of these servers and the process got stuck. I logged in using another SSH session and I found that dpkg is in D state (uninterruptible sleep). According to what I have read, this state results generally from I/O waiting like waiting for NFS share. I can not understand why dpkg will block in this state. I can not see any obvious problems other than this. Here is the output of ps to show the blocking process: $ ps axo pid,cmd,s,wchan | grep dpkg 22571 /usr/bin/dpkg --status-fd 2 D call_rwsem_down_read_failed This process can not be killed even with kill -9. So, I will not be able to install/upgrade any package unless I reboot the server. What makes it worse is that the remote reboot does not succeed in such a case (having processes in D state). Can anyone help with this? How can I avoid this in the future.

  Read the article

• Init.d script gets return code 1 when calling itself, how can I get output?

  - by Per

  My question is, how can I modify the script so that it will tell me what goes wrong? The scenario is this: I'm trying to get Sonatype Nexus to start as a service in Ubuntu 10.04, and it just will not work. (I'm not looking for help on how to run Nexus, but on how to get some useful output from a script) It works when invoking it with sudo /etc/init.d/nexus start but fails when using sudo service nexus start I have run the update-rc.d command on it, and done everything according to instructions. The nexus init.d-script has a point where it calls itself when it detects that it should run as another user ('nexus'): su -m $RUN_AS_USER -c "\"$REALPATH\" $2" which expands to su -m nexus -c '"/opt/nexus-2.0.2/bin/jsw/linux-x86-64/nexus" start' when adding the -x debug flag to the script. This command results in return code 1. It never executes - I've set -x debug flag on the script, placed echo commands with redirect to file at the start of script to trace, etc. I cannot get any output telling me why the command will not execute. I've tried appending redirect to file after the above script line, inside the quotes, outside, any way I could imagine. All info I can get is by inserting a line echo $? after the su line, which outputs '1'. Is there a way I can see what happens when the su command runs?

  Read the article

• StyleCop Custom Rules

  - by Aligned

  There are several blogs on how to do this (http://scottwhite.blogspot.com/2008/11/creating-custom-stylecop-rules-in-c.html, etc). I’ve found a few useful things to point out: Debugging is difficult, but here are the steps (thanks to Tintin’s answer). “One way: 1) Delete your custom rules 2) Open Visual Studio (for dev), open your custom rule solution 3) Build & Deploy custom rules (a PostBuild action to copy the rules into the StyleCop folder is handy) 4) Open Visual Studio (for test) 5) Use VS (dev) and Attach to process devenv.exe (the test VS instance), set breakpoints in the rules you want to debug 6) Use VS’ (test) and right-click on project, Run StyleCop 7) Debug” ~ it worked once, now I’m having problems getting it to work again ~ I also get the message “Cannot evaluate expression because the code of the current method is optimized.” when I try to look at properties. Looking at the source code of the StyleCop.CSharp.Rules.dll that comes with the install. I used JustDecompile from Telerik. Create one xml file and name it the same as the one cs file (CodingGuildelineRules.cs and CodingGuidelinRules.xml) Deploy: 1. Build in Visual Studio 2. Close Visual Studio (Style cop is running so you can’t override your dll without closing) 3. Copy the dll from the bin to the C: \Program Files (x86)\StyleCop 4.7\ 4. Open the settings file or re-open Visual Studio

  Read the article

• How do I mount a CIFS share via FSTAB and give full RW to Guest

  - by Kendor

  I want to create a Public folder that has full RW access. The problem with my configuration is that Windows users have no issues as guests (they can RW and Delete), my Ubuntu client can't do the same. We can only write and read, but not create or delete. Here is the my smb.conf from my server: [global] workgroup = WORKGROUP netbios name = FILESERVER server string = TurnKey FileServer os level = 20 security = user map to guest = Bad Password passdb backend = tdbsam null passwords = yes admin users = root encrypt passwords = true obey pam restrictions = yes pam password change = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . add user script = /usr/sbin/useradd -m '%u' -g users -G users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' guest account = nobody syslog = 0 log file = /var/log/samba/samba.log max log size = 1000 wins support = yes dns proxy = no socket options = TCP_NODELAY panic action = /usr/share/samba/panic-action %d [homes] comment = Home Directory browseable = no read only = no valid users = %S [storage] create mask = 0777 directory mask = 0777 browseable = yes comment = Public Share writeable = yes public = yes path = /srv/storage The following FSTAB entry doesn't yield full R/W access to the share. //192.168.0.5/storage /media/myname/TK-Public/ cifs rw 0 0 This doesn't work either //192.168.0.5/storage /media/myname/TK-Public/ cifs rw,guest,iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0 Using the following location in Nemo/Nautilus w/o the Share being mounted does work: smb://192.168.0.5/storage/ Extra info. I just noticed that if I copy a file to the share after mounting, my Ubuntu client immediately make "nobody" be the owner, and the group "no group" has read and write, with everyone else as read-only. What am I doing wrong?

  Read the article

• Couldn't pass the signin screen on ubuntu

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• JEOS

  - by john.graves(at)oracle.com

  JEOS stands for Just Enough Operating System.  It is  great environment for building virtual machines without all the clutter of a windowing system, games, office products, etc.  It is from Ubuntu and you install it using the Ubuntu server install, but rather than picking a standard install, press F4 and choose “Install a minimal system.” Note: The “Install a minimal virtual machine” is specific to VMWare and I plan to use VirtualBox. Be sure to include Open SSH in the install so that it installs sshd. *** Also, if you plan to install XE, you’ll need to modify the partitions to have a larger swap space (at least 1.5 G). *** Once the install is done, I find it useful to install a few other items. Update Ubuntu apt-get update Install some other tools apt-get openjdk-6-jre Yes, java will be included in any of the WebLogic installs, but I need this one if I want to do remote display (for config wizards, etc). apt-get gcc Some apps require to rebuild the kernel modules, so you’ll need a basic compiler. Install guest additions (Choose the VirtualBox Devices->Install Guest Additions…” option.  This sets up a /dev/cdrom or /dev/cdrom1.  You’ll need to manually mount this temporarily: sudo mount /dev/cdrom /mnt Then run the linux .bin file. Update nofile limits.  Most java apps fail with the standard ubuntu settings: edit /etc/security/limits.conf and add these lines at the end: *     soft nofile 65535 *     hard nofile 65535 root  soft nofile 65535 root  hard nofile 65535 These numbers are very high and I wouldn’t do this on a production system, but for this environment it is fin. To get rid of the annoying piix error on boot, add the following line to the /etc/modprobe.d/blacklist.conf file blacklist i2c_piix4

  Read the article

• tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

  - by user72372

  I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

  Read the article

• Mod a Swing Arm Lamp into an Adjustable Camera Stand

  - by Jason Fitzpatrick

  If you’re looking for a simple way to get a bird’s eye view to record your DIY projects or other table-based activities like gaming or tinkering, this simple modification to a swing-arm lamp offers a highly flexible camera mount on the cheap. IKEAHacker reader Stef needed an adjustable arm for his iPhone camera so he could record in a top-down-view for some drawing tutorials he was working on. Rather than shell out big bucks for a custom boom arm, he scrounged up a swing arm lamp with a broken shade in the as-is bin at his local IKEA. To mount the iPhone he simply attached a car mount for the iPhone to the swing arm and called it good. Hit up the link below for more pictures; even if you don’t have an IKEA nearby, swing arm lamps are cheap and easy to acquire. Forsa Camera Stand [IKEAHackers] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

  Read the article

• Trying to compile from source newest apache with newest openssl

  - by AlexMA

  I need to install apache 2.4.10 using openssl 1.0.1i. I compiled openssl from source with: $ ./config \ --prefix=/opt/openssl-1.0.1i \ --openssldir=/opt/openssl-1.0.1i $ make $ sudo make install and Apache with: ./configure --prefix=/etc/apache2 \ --enable-access_compat=shared \ --enable-actions=shared \ --enable-alias=shared \ --enable-allowmethods=shared \ --enable-auth_basic=shared \ --enable-authn_core=shared \ --enable-authn_file=shared \ --enable-authz_core=shared \ --enable-authz_groupfile=shared \ --enable-authz_host=shared \ --enable-authz_user=shared \ --enable-autoindex=shared \ --enable-dir=shared \ --enable-env=shared \ --enable-headers=shared \ --enable-include=shared \ --enable-log_config=shared \ --enable-mime=shared \ --enable-negotiation=shared \ --enable-proxy=shared \ --enable-proxy_http=shared \ --enable-rewrite=shared \ --enable-setenvif=shared \ --enable-ssl=shared \ --enable-unixd=shared \ --enable-ssl \ --with-ssl=/opt/openssl-1.0.1i \ --enable-ssl-staticlib-deps \ --enable-mods-static=ssl make (would run sudo make install next but I get an error) I'm essentially following the guide here except with newer slightly newer versions. My problem is I get a linker error when I run make for apache: Making all in support make[1]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' make[2]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' /usr/share/apr-1.0/build/libtool --silent --mode=link x86_64-linux-gnu-gcc -std=gnu99 -pthread -L/opt/openssl-1.0.1i/lib -lssl -lcrypto \ -o ab ab.lo /usr/lib/x86_64-linux-gnu/libaprutil-1.la /usr/lib/x86_64-linux-gnu/libapr-1.la -lm /usr/bin/ld: /opt/openssl-1.0.1i/lib/libcrypto.a(dso_dlfcn.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5' I tried the answer here, but no luck. I would prefer to just use aptitude, but unfortunately the versions I need aren't available yet. If anyone knows how to fix the linker problem (or what I think is a linker problem), or knows of a better way to tell apache to use a newer openssl, it would be greatly appreciated; I've got apache 1.0.1i working otherwise.

  Read the article

• PDFtk Password Protection Help

  - by Dave W.

  I am using Ubuntu 11.10 and am looking for a solution to password protect a bunch of pdf files in a directory in batch. I came across PDFtk and it looks like it might do what I need, but I've reviewed the command line PDFtk examples and can't figure out if there is a way to do it in batch without having to individually specify the output file name for every file. I'm hoping a command-line guru can take a look at the PDFtk syntax and tell me if there is some trick / command that will allow me to password protect a directory of pdf files (e.g., *.pdf) and overwrite the existing files using the same name, or consistently rename the individual output files without having to specify each output name individually. Here's a link to the PDFtk command line examples page: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/ Thanks for your help. I think I've answered my own question. Here's a bash script that appears to do the trick. I'd welcome help evaluating why the code I've commented out doesn't work... #!/bin/bash # Created by Dave, 2012-02-23 # This script uses PDFtk to password protect every PDF file # in the directory specified. The script creates a directory named "protected_[DATE]" # to hold the password protected version of the files. # # I'm using the "user_pw" parameter, # which means no one will be able to open or view the file without # the password. # # PDFtk must be installed for this script to work. # # Usage: ./protect_with_pdftk.bsh [FILE(S)] # [FILE(S)] can use wildcard expansion (e.g., *.pdf) # This part isn't working.... ignore. The goal is to avoid errors if the # directory to be created already exists by only attempting to create # it if it doesn't exists # #TARGET_DIR="protected_$(date +%F)" #if [ -d "$TARGET_DIR" ] #then #echo # echo "$TARGET_DIR directory exists!" #else #echo # echo "$TARGET_DIR directory does not exist!" #fi # mkdir protected_$(date +%F) for i in *pdf ; do pdftk "$i" output "./protected_$(date +%F)/$i" user_pw [PASSWORD]; done echo "Complete. Output is in the directory: ./protected_$(date +%F)"

  Read the article

• install android sdk on kubuntu

  - by dot

  I'm trying to follow the instructions for installing the android sdk found here: http://developer.android.com/sdk/installing/adding-packages.html After i've unpackaged and i run the android program under tools, I don't get all the options that I'm supposed to. The only 2 folders that show up are tools, and extras. Under tools, it only shows the "Android SDK Tools" with the status "Installed". Under the "extas" folder, I have nothing. I've made sure that my http: proxy settings are correct. And I've checked the logs. there are no errors. According to the android developer site, I'm supposed to install the SDK platform tools. has anyone tried this on ubuntu? I also checked and saw others were instructed to do an apt-get install ia32-libs but it failed for me. Besides which, I am running the 32bit os... so I don't think i would need to install that... ?? I've also tried following the instructions found here: http://forums.team-nocturnal.com/showthread.php/772 But... I can't seem to add the personal archive nilarimogard without getting an error message. when i attempt: sudo add-apt-repository ppa:nilarimogard/webupd8 I get the message: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 125, in ppa_info = get_ppa_info_from_lp(user, ppa_name) File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 80, in get_ppa_info_from_lp curl.perform() pycurl.error: (7, "couldn't connect to host") root@jll:/home/me/Documents# any suggestions? Thanks.

  Read the article

• Obtain reference to Parent object during instantiation

  - by GoldBishop

  I have a situation where a custom class is a property of another class. What i need to be able to do, if it is possible at all, is obtain a reverse to the "parent" class (ie the the class that holds the current class as a property). For Instance: Public Class Class1 ... public readonly property Prop11 as Class2 public property Prop12 as String ... End Class Public Class Class2 ... private _par as Class1 private _var21 as string ... Public Sub New(...) me._par = ???? ... End Sub public readonly property Prop21 as string Get return me._par.Prop12 & me._var21 End Get End Property ... End Class Ultimately, i am trying to access other properties within Class1 from Class2 as they do have substance for information from within Class2. There are several other classes within Class1 that provide descriptive information to other classes contained within it as properties but the information is not extensible to all of the classes through Inheritance, as Class1 is being used as a resource bin for the property classes and the application itself. Diagram, lazy design ;): Application <- Class1.Prop12 Application <- Class1.Prop11.Prop21 Question: Is it possible to get a recursion through this design setup?

  Read the article

• Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

  - by Drachenviech

  I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Ubuntu won't start - blank screen with flashing white cursor

  - by loomy

  My laptop is dual-booted with Windows 8 on one partition and Ubuntu 12.04.3 on the other. I've searched for my issue already, but nothing I've found so far has solved the problem. Since last week, when I try to boot Ubuntu from GRUB, I am taken to a purple screen (as usual), but then to a black screen with a blinking white _ cursor. I've tried leaving it, but nothing else happens. When I hold Shift and edit the GRUB entry to change 'quiet slash' to 'text', the back screen instead asks for my login and password. When I put them in, it tells me the date of my last logon, and then waits for further commands. Being very very new to Ubuntu, I have no idea at all what to try out at this point. I tried to launch FailsafeX, but while that was beginning, it said "unable to run server /usr/bin/x" No such file or directory", then shortly after returned to the recovery mode menu. Pressing Ctrl+Alt+Delete goes through an Ubuntu loading screen, then the laptop then restarts. Any suggestions will be very appreciated, and apologies if this is a common issue that has been answered a million times before.

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• User Switching in XFCE 12.04 with LightDM and dumping unneeccesary Gnome libs

  - by user111120

  I'm an elder non-techie Mac-to-Linux convert trying to play the linux tech game by ear, so please be gentle! :) I am running XFCE Ubuntu 12.04 totally on a 8-gig flash drive and it's fantastic. I am starting to run into potential space issues (down to 1.0 gig free from 1.9 gigs since being installed last summer), most likely because of growing Thunderbird mail files, and this prompted my question. I just installed lightDM on my system because I want the ability to switch users in XFCE if I follow instructions on another blog. They advised using LightDM instead of GDM because LightDM doesn't download Gnome libraries. That's great since I need the space, but my question is how can I tell whether I don't already have Gnome libraries installed from other updates and such? And can I minimize having any Gnome libraries? The method for me to switch users entails creating a "fast-user-switch" file in /usr/local/bin; is there any easier way? One last thing so I din't have topen another needless thread; while experimenting I somehow lost the share folder in one of my accounts. Is there any way to get a share folder back? Thanks for any tips! Jim in NYC

  Read the article

• Quickly ubuntu-application + indicator template don't work

  - by aliasbody

  I've started to work with quickly and python (because I wanted to have some GTk3 integration and create and appindicator), and so I create the projecto like this : quickly create ubuntu-application ualarm cd ualarm quickly run And the application launched. But then I tried to add the appindicator like this : quickly add indicator And since then the application doesn't start anymore and this error appear : aliasbody@BodyUbuntu-PC:~/Projectos/ualarm$ quickly run (ualarm:8515): Gtk-WARNING **: Theme parsing error: gnome-panel.css:28:11: Not using units is deprecated. Assuming 'px'. /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) Traceback (most recent call last): File "bin/ualarm", line 33, in <module> ualarm.main() File "/home/aliasbody/Projectos/ualarm/ualarm/__init__.py", line 33, in main window = UalarmWindow.UalarmWindow() File "/home/aliasbody/Projectos/ualarm/ualarm_lib/Window.py", line 35, in __new__ new_object.finish_initializing(builder) File "/home/aliasbody/Projectos/ualarm/ualarm/UalarmWindow.py", line 24, in finish_initializing super(UalarmWindow, self).finish_initializing(builder) File "/home/aliasbody/Projectos/ualarm/ualarm_lib/Window.py", line 75, in finish_initializing self.indicator = indicator.new_application_indicator(self) File "/home/aliasbody/Projectos/ualarm/ualarm/indicator.py", line 52, in new_application_indicator ind = Indicator(window) File "/home/aliasbody/Projectos/ualarm/ualarm/indicator.py", line 20, in __init__ self.indicator = AppIndicator3.Indicator('ualarm', '', AppIndicator3.IndicatorCategory.APPLICATION_STATUS) TypeError: GObject.__init__() takes exactly 0 arguments (3 given) How can I solve this problem ?

  Read the article

• Virtualization in Ubuntu 11.10

  - by Mascarpone

  Since Ubuntu 11.10 use a new kernel, it's very difficult to have a decent support for virtualization. VirtualBox doesn't support guest additions for ubuntu 11.10, so I can't copy to and from my ubuntu desktop and windows, which I absolutely require, plus FreeBSD seems not to be able to use DHCP without guest additions. Virt-manager instead gives an error on launch: Unable to open a connection to the libvirt management daemon. Libvirt URI is: qemu:///system Verify that: - The 'libvirt-bin' package is installed - The 'libvirtd' daemon has been started - You are member of the 'libvirtd' group unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 1146, in _open_thread self.vmm = self._try_open() File "/usr/share/virt-manager/virtManager/connection.py", line 1130, in _try_open flags) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 102, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied The problem is solved by running virt-manager as root, but I don't like that. How do I change permissions to run Virt-Manager as user? Is there a way to install guest additions on Ubuntu 11.10?

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >