Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 203/1008 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

  • lower-case 'c' key not working in bash

    - by gavin
    This is a bit of a strange one. I'm running Ubuntu 12.04. It's been working well but today, I ran into a hell of strange phenomenon. I can no longer type a lower-case 'c' in bash. At first I thought it was a misconfiguration for the gnome terminal but I tried both a stock xterm and directly at the console (ctrl+alt+F1) and the issue was the same. I can type an upper-case C without any difficulty and I can type lower-case 'c' in any other terminal based program (vim, bash, less, etc.). The lower 'c' also works if I jump into plain old sh. I looked at all the configuration files I know of and haven't found anything incriminating in there. I suspect it's not going to be that simple anyway because if I run bash with the '--norc' option from within sh, the problem remains. I don't know what else to check. In fact, if I wanted to cause this problem on a given machine, I have no idea how it could be done. Total mystery.

    Read the article

  • How to change fonts using gnome-tweak-tool?

    - by john the fatbloke
    As a non-techie type user, I've managed to find the "Advanced Settings" option in the "other" menu listing, which is good (sort of). In the past, I've routinely installed the windows fonts from my windows partition. Now even though I have the msttcorefonts package installed, and all of the .ttf windows fonts installed (as far as I can tell), it doesn't matter whether I log out and back in (which in the past has brought up some of the stuff I've wanted installed), or even if I just restart the Ubuntu completely from boot, none of them are listed. So how do I make the gnome tweek tool see the directory with all the fonts in it please ?

    Read the article

  • Problems with brother printer drivers on 64bit 12.04

    - by Jeff Klein
    I'm running 12.04 64bit on a toshiba satellite laptop. I have a Brotrher MFC-J825dw printer. I've installed brothers driver for it and the cupswrapper but it won't print. I says it is receiving data but it never shows up in the queue. I've also tried the text only generic driver and the same thing happens. I think some dependencies are missing for the cups wrapper and when I try to find it it says it can't be installed. Nopt sure if that's the problem because it doesn't explain the generic driver failure. In any case, any ideas?

    Read the article

  • WebGL and Hardware acceleration problems [duplicate]

    - by Harry
    This question already has an answer here: How To Enable WebGL In Chrome On Ubuntu? 1 answer I am currently running Ubuntu 12.04 and in Windows 7 on my ATI Mobility Radeon 4300 series graphics card WebGL and hardware acceleration worked perfectly fine. Now on Ubuntu 12.04 I have tried both the open-source drivers and the FGLRX drivers and it no longer works. Could somebody please help? I use Google Chrome 18

    Read the article

  • Install using a Logitech Keyboard and mouse with bluetooth dongle?

    - by Ryan
    I'm trying to install 12.10 on my system, but my mouse and keyboard are not working during installation. I use the Logitech MX5500 Bluetooth mouse+keyboard combo with a Bluetooth dongle. My keyboard and mouse work in my UEFI bios, and during the Windows 7/8 installation. My keyboard also works in the Ubuntu screen that allows me to set options, install, use the live cd, etc, before boot. I'm wondering if anyone knows a way to get this dongle working during the installation process so that I can actually install 12.10.

    Read the article

  • Set which pulseaudio sync is affected by volume control buttons

    - by Michael K
    On my previous installation of ubuntu 10.04 it was possible to set a sync in pavucontrol, which is affected by the volume up-/down buttons on my keyboard. Now in Lubuntu 11.10 this does not work anymore. I can check the green tick, but this affects nothing, still always one and the same sink is affected. Did anybody have this before? Where is this function configured - is there a config file, in which I could change this configuration directly?

    Read the article

  • Where do I file bugs for the Ubuntu One music client for Android?

    - by Jorge Castro
    I've recently started using the Ubuntu One Music streaming client for Android. From the web page it says that the android app is based on Subsonic. I want to file bugs on the app, mostly feature requests and things like that, and from looking at the screenshots, the application seems to be Subsonic preconfigured to use my U1 music collection. Is it appropriate for me to file feature requests with Subsonic, or is there a Launchpad project where we're supposed to file bugs which are then vetted and sent upstream?

    Read the article

  • GParted in UBUNTU shows entire disk as UNALLOCATED SPACE

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows, after 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu but still I get the hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but I wasn't able to, since GParted or the Ubuntu installer itself does not recognized my partitions and shows the entire disk as unallocated space. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk!

    Read the article

  • How can I find and remove 6to4 from my system?

    - by Kelley
    Last week I installed Miredo and configured my system to handle IPv6 through 6to4 tunneling. It was easy and it worked well. So I decided I'd give Hurricane Electric's IPv6 connection a try. I've had a lot to learn, and I thought I had it all running (with a great deal of help from a very patient person at Hurricane: my LinkSys E3200 didn't like IPv6). But now, when all should be good, after I uninstalled Miredo and Teredo and whatever else, I find that there is "6to4 tunneling - another automatic tunneling," which I need to remove from my box. But I have no idea where or what it might be. Connected to my computer are a couple printers, an external hard drive, and a router (which has no settings for IPv6). All of these are, I think, innocent in this matter. So, how can I get rid of 6to4 tunneling, when I don't even know where it is? Is there someplace to look and find out what's going on? I'm pretty new to Linux and Ubuntu.

    Read the article

  • Internet connection is very slow

    - by ThanujJA
    I use GSM onnection to surfe internet. Before I move to ubuntu I used windows 7 OS. It gives me good speed with GSM connection (100 kbps) But now ubuntu gives me very slow speed.(2-3 kbps) Now it make difficult to use GSM connection. In my country (Sri Lanka) mobile brodbrand servises are very expensive so I cant move to onother one. If I use GSM connection they gives me free data (Airtel connection) So it is most valuable reason for me to use GSM connection. Please anybody help me to speed up my network. Thanx

    Read the article

  • Sendmail not working as desired in bash script

    - by dan08
    This is the code I have in a bash script that runs as a cronjob. The cronjob run as root. /usr/sbin/sendmail [email protected]<<EOF subject:Backup Error! from:backup@server01 $error EOF There is code after this and the email I get is as follows: From the root user on the machine. and the message includes: subject:Backup Error! from:backup@server01 $error EOF More code... that is in the script all the way to the end... I have tried other variations, this is the closest I've got. I tried this in a regular script and it worked properly. Whats going on, and how can I send this email, specifying the subject and form sender?

    Read the article

  • Are libc versions tied to kernel versions?

    - by mathematician1975
    After reading the answers to my previous question I have come to the conclusion that an answer to the following question is what I was actually looking for: Does a particular version of the kernel require a particular version of libc to run properly? Basically my problem stems from building an application on my 12.04 ubuntu and trying to run it on 8.04. I have since learned from this and other stackexchange forums that it is backward compatibility of libc that causes these problems. Therefore what I am perhaps naively trying to do is build the same version of libc that exists on my target and then link against that on my host when I build the application. Then in an ideal world when I copy this to the host, having been linked to the "correct" libc it should work (in my head at least). I have been totally unable to find a way to install an older libc on my system, and wondered if each version is tightly bound to a kernel version, hence the above question.

    Read the article

  • Creating a GTK theme, but Qt and Java apps are not affected, and title bar button layout is ugly

    - by Mr. Pixel
    I'm playing with a gtk2 / gtk3 theme which I use in the Mate desktop. Everything is looking well, even gtk3 apps, but I still have 3 important issues: Java apps ignore the theme QT apps ignore the theme I'm using those nice ubuntu 10 title bar buttons, but the problem is, when only the close button appears, the title bar looks ugly. Can I make it so that it shows the two other buttons, but disabled? I don't know how Ubuntu 10 handled this. Here's a screenshot showing the 3 problems (above is a small java app, below is a Qt app): Under my previous desktop environments, Unity and Cinnamon, both apps seemed to be taking the right theme correctly, but I did not use my custom theme yet. Cinnamon is based on gnome-shell by the way, and mate is a gnome2-fork. Please note that the shown java app explicitely tries to load the gtk theme at runtime. By default, java apps don't, but this one has the necessary code, which worked in unity and cinnamon. Any suggestions how I could make my theme better so these problems disappear? Thank you very much!

    Read the article

  • Missing Operating System after trying to upgrade to Ubuntu 11

    - by Mauricio
    there! After trying to upgrade from Ubuntu 10.04 to 11, the upgrading process stopped when running and then I got an "out of disk, grub rescue" message when booting. After running Boot Repair, I got this results. Now I get "Missing Operating System" whent trying to boot. Bellow I show some results from some commands I gather from help foruns, but I still reached no solution. Could you please help me? Any enlightment will be very helpful! Disk Utility says "Disk has a few bad sectors". When trying to run the Self-test I get "FAILED (Read)" Here we have what Gparted says about the /dev/sda1 partition (ext4): Flags: boot Status: not mounted Warning: e2label: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1Couldn`t find valid filesystem superblockUnable to read the contents of this filesystem! From sudo fdisk -lI got: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000e0596 Device Boot Start End Blocks Id System/dev/sda1 * 2048 607428607 303713280 83 Linux/dev/sda2 607430654 625141759 8855553 5 Extended/dev/sda5 607430656 625141759 8855552 82 Linux swap / SolarisDisk /dev/sdb: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c3c41 Device Boot Start End Blocks Id System /dev/sdb1 * 63 625137344 312568641 c W95 FAT32 (LBA) " and fromsudo fdisk /dev/sda1I got fdisk: unable to read /dev/sda1: Inappropriate ioctl for device` From sudo mount /dev/sda1 /mntI got: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From sudo update-grubI got: error: cannot read from `/dev/sda'. /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

    Read the article

  • Can't get HP Officejet 6500 card reader to work.

    - by Dennis
    This network (wired) printer works great using the latest HPLIP drivers. However when I plug in an SD card, it just blinks and never shows up mounted anywhere. Has anyone come up with a way to mount these? I'm using Lucid, 10.04. re: version, hp-info says xxxxx@lucid:~$ hp-info HP Linux Imaging and Printing System (ver. 3.10.5) Device Information Utility ver. 5.2 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Using device: hp:/net/Officejet_6500_E709a?zc=HP05857E

    Read the article

  • Upgrading to Ubuntu 11.04 failed

    - by Rupert
    Today Ubuntu asked me to upgrade to 11.04. The installation went completely fine until right at the end when the following packages failed: install-info ubuntu-standard The installer hung so I had to shut it down manually. Ubuntu still works fine but it says that the upgrade didn't work properly so I am hesitant to restart it until I have resolved the problem in case I can't get back in. I am running Ubuntu inside the latest version of Virtual Box and was previously running version 10.10. I have tried installing install-info manually with apt-get but I get the following error: Unhandled exception: [#<SystemStackError: stack level too deep>] /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:842:in `block in <class:Autotest>': undefined method `backtrace' for [#<SystemStackError: stack level too deep>]:Array (NoMethodError) from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `[]' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `block in hook' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `each' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `any?' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `hook' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:344:in `rescue in run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:320:in `run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:241:in `run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/bin/autotest:6:in `<top (required)>' from /usr/local/ruby/bin/autotest:19:in `load' from /usr/local/ruby/bin/autotest:19:in `<main>' dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of info: info depends on install-info; however: Package install-info is not configured yet. dpkg: error processing info (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of ubuntu-standard: ubuntu-standard depends on info; however: Package info is not configured yet. dpkg: error processing ubuntu-standard (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: install-info info ubuntu-standard E: Sub-process /usr/bin/dpkg returned an error code (1) Any ideas on what I should try next?

    Read the article

  • How do I reinstate my admin user privileges to global read/write

    - by Matt
    I am running Ubuntu 12.04 LTS. I only have the one user which I created when I installed Ubuntu. Everything has been fine - love it - until I updated a software package recently from the command line using sudo (not gksudo). I was having a little bother which did not make sense to me and in a fluff changed my user read/write privileges through the GUI (not even clear how I got there!). After restart I was stuck in a login loop - using the right login password but kept getting looped back to the login and could only login as Guest. I could still login with my user/password via ctrl + alt + f1 Eventually I was able to login again at start up. Not sure exactly what it was I changed that worked but it was one of/or a combination of installing latest security updates, changing login manager from LightDM to DGM and back again, removing the ICE/Xauthority and chown user. Current dilemma is my primary admin user privileges were read only. In the command line ls -ls /home/user returned this value: drwx------ 48 username username 20480 I have since changed this using sudo chmod 0755 /home/username (from my limited understanding 755 should return my user privileges to their original read/write glory). ls -ld /home/user currently shows my user privileges as: drwxr-xr-x 48 username username 20480 I still seem to have only read access permissions. I've been through lots of threads (and the help file) that talk about creating new users/groups permissions etc. but specific info on returning my existing global/admin/primary users privileges to what they were when I first created that user - baffling me. I feel this is something really simple I'm just not getting it. Please help! sudo mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /proc type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusect1 (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=07pe tmpfs55) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw, ,nosuid,nodev,size=5242880 none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/meng/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=meng) none on /tmp/guest-1R2Fi5 type tmpsf (rw,mode=700)

    Read the article

  • Bumblebee : Module bbswitch could not be loaded

    - by StepTNT
    I've upgraded to 12.04 and I had to switch from Ironhide to the latest version of Bumblebee. Now, when I try to run bumblebeed, I get this error: FATAL: Module bbswitch not found. [ERROR]Module bbswitch could not be loaded (timeout?) [WARN]No switching method available. The dedicated card will always be on. I don't really need to use the secondary VGA on Kubuntu, so I would like to find a way to definitely shut the discrete GPU down and avoid wasting battery. I can't disable it from the BIOS because I use it on Windows. My card is an nvidia 540M.

    Read the article

  • Settings xorg.conf to be used with VESA driver?

    - by Fernando Costa
    I have an brand new installation of Ubuntu 9.10 (karmic version) where everything is fine except the video resolution. In Ubuntu 9.10, the file xorg.conf is empty by default. I'm using an onboard video card, and Ubuntu can not find the right resolution for me. It always uses 800x600, but I need at least 1024x768. Also, my monitor is listed as Unknown Type. Ubuntu did find the right resolution when I changed the monitor to a Samsung monitor. By the way what are the generic settings to put inside xorg.conf? What is the settings for Refresh Rate, for example, I got a resolution of 1280x800, but the Refresh Rate generally between 60 ~ 80 htz is ZERO on my resolution.. In 1024 resolution my Refresh Rate is 75 htz.. What is going on with my resolution and how to modify the Refresh Rate?? Many Thanks!

    Read the article

  • 2 windows loaders after grub2 repair

    - by adi
    I have recently reinstalled w7 and had ubuntu 12.04 lts installed on it,w7 installation deleted the grub2 loader,after that i found solution to use boot-repair from live-cd session, BUT......now i have 2 windows 7(loader)in grub loader,and only 1 windows 7 installation,how can i remove it?One is on on /dev/sda1(which should be w7 sistem reserved partition) and second is on on /dev/sda2(which is w7 installment partition) it says and both log on same w7.All i need is to remove it without brake the grub2 again and if someone is willing to guide me to add windows on primary selection, cause my girlfriends doesnt get along with linux :D.

    Read the article

  • Flash player stops working in Firefox

    - by Alin
    First of all please be merciful as I am a 2 days ubuntu user. I've only used Windows OSs before. Hardware configuration -Quad Core Q6600 CPU -4 GB RAM -Geforce 8800GT 512 MB RAM -Seagate 320GB Harddisk I installed ubuntu x64 and everything went smooth. I had Adoble flash player installed from Ubuntu Software Center. The problem is that the flash videos on youtube (basically on all pages) looked pixelate. I use Firefox 3.6 that came with ubuntu by default. After reading around here I saw something about overriding hardware acceleration but that didn't work either. Or maybe I just didn't do it correctly. The problem was that if I opened 2-3 youtube tabs, when closing one of them, in 95% of the cases, the flash plugin would crash in remaining tabs and a black screen was instead of the video. After doing some more search I discovered the FlashAid extension for Firefox. I installed it and it made an update of flash plugin. Now the videos look good but now each time I watch a video, when switching to another one the flash plugin crashes and I can see insead of the vide the firefox message with Plugin has crasshed, refresh the page. Basically this is what I miss to have a complete pleasant ubuntu experience. Any ideas how to fix this? Thank you

    Read the article

  • Notebook Dell Inspiron N5110 Overheating after Installing Ubuntu 12.04

    - by Gilberto Albino
    there! I am scared here! I am a Windows 7 User and decided to install Ubuntu 12.04 on my Notebook Dell Inspiron N5110 and when the Grub loads with the menu list the fan starts speeding up. If I choose windows the fan is noiseless but if I choose Ubuntu... Gosh!!! It continues speeding up and overheating... I'm very sad about that! Every time I try to use Linux... I get a diferent hardware issue related to incompatibility or bugs! When it's not graphic driver it is bug elsewhere unimaginable!!! If there is a solution for this... I wonder if someone could spend some time helping me out because... I have JUST bought this notebook because it is in the list of Certified Hardware: http://www.ubuntu.com/certification/hardware/201012-6931/ So this is sad and somehow disgusting! Linux is going for the wrong way! It's never gonna be popular while doesn't have so wide hardware support like WIndows! That's a pitty! It's very likely I won't get answered meanwhile I will switch back for windows! I prefer paying my Windows License and having a fully working system than having a free open source software that is about to explode my notebook or toast my hands before! So you linux wonderful guys help! I need somebody help (beattles so I won't cry)

    Read the article

  • Getting Ubuntu on Bootloader after formatting

    - by Muhammad Badi
    I've been running Windows XP on a desktop machine (C:/) and installed Ubuntu 12.04 (D:/) and Windows bootloader was able to recognize Ubuntu when I turn on the computer. Months later, I've formatted drive C:/, removed XP, and then installed Windows 7 but sadly, Ubuntu is not showing in the boot menu as it used to be presented: Windows 7 Ubuntu How to get it back on boot list? NOTE: Please note that installing Ubuntu was done from inside Windows XP with wubi.exe

    Read the article

  • Flash video streaming choppy for Chrome, alright for Firefox

    - by Ben
    I'm using Ubuntu 12.04.1, Chrome 21 and Firefox 15. Flash player 11.2 has been installed, and I've just started using Ubuntu... yesterday. And I'm using a Lenovo T61. The problem is that it doesn't matter if it's youtube or vimeo or some other flash player, it streams fine on chrome but every 30 seconds or so, there is a pause in video playback (with audio continuing) before it catches up, skipping quite a few seconds of video. It works perfectly fine in Firefox, and I've tried disabling PepperFlash/libpepflashplayer.so in Chrome but it doesn't seem to affect the performance. Anyone know how to work around this? It's more a problem of convenience because I don't like the idea of having to switch between Chrome and Firefox just to watch videos.

    Read the article

  • After re-installing ubuntu 13.10, stuck at GRUB Rescue, Boot-Repair didn't work!

    - by user205691
    Because i could not get the WiFi login work, i thought i will reinstall ubuntu, with internet connection to have updated drivers for wireless & graphics etc. I have deleted earlier linux partitions usings gparted and re-installed ubuntu 13.10, exactly following the same steps as i did earlier, making a 100GB /home on dev/sda and pointing root to /dev/sdb (SSD) and swap on dev/sda/ . Installing boot on /dev/sdb. But, somehow i think the grub is either corrupted or removed because i am unable to boot the laptop to any OS now. I get the following message: "no such device" xxxxx followed by huge HEX number GRUB rescue when i type ls on Grub rescue prompt, i can see hd0 & hd1, but thats about it. i tried Boot-repair but it is unable to fix the problem. The following log is generated via boot-repair create log: Boot-repair log I am unable to boot into windows or linux at the moment and need help to fix the grub so i can boot !!

    Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >