Search Results

Search found 10711 results on 429 pages for 'ghost blog'.

Page 203/429 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

  • Microsoft Certifications &ndash; how to prep? and why?

    - by Kelly Jones
    I often get asked by my colleagues, “how do you prepare for Microsoft exams?” Well, the answer for me is a little complicated, so I thought I’d write up here what I do. The first thing I do is go to Microsoft’s website to find the exam that I need to take.  If you’re looking to get a particular certification, then their site lists the exam or exams that you’ll need to pass.  If you’ve already taken an exam, you can log onto the MCP website and use their certification planner.  This little tool tells you what tests you need, based on the exams you’ve already passed.  It is very helpful with the certifications that are multiple tests and especially ones that have electives. Once you’ve identified the test, you can use Microsoft’s website to see the topics that it covers.  This is a good outline to follow when you study.  I’ll keep this handy to reference back throughout my studying to make sure that I’m covering all the topics I need to know. The next step is probably where I am a little different from others.  IF the exam outline covers material that I’ve already been working with, then I’ll skip a lot of the studying and go directly to the practice tests.  However, if I’m looking at the outline and wondering how in the world do you do that? – then it’s time to hit the books. So, where to find study materials?  Try typing in the exam number into any search engine.  You’ll typically find a ton of resources.  If you’re lucky, you’ll find books that others recommend based on their studying and exam experience.  As a Sogeti employee, I have access to three really good resources: an internal company list of all of the consultants who have passed particular tests (on our Connex website), Books 24x7, and Transcender practice exams. Once my studying is done (either through books or experience), I’ll go through the practice exams.  I find them really helpful in getting my knowledge lined up to the thinking process that the exam writers use.  If I’m relying on my experience, then this really helps me to identify gaps in my knowledge that I’ll need to fill. That’s about it.  If I’m doing ok on the practice exams, then I’ll take the real thing.  I’ve found that the practice exams are usually more difficult than then real thing. Oh – one other thing I do related to Microsoft exams – I try to take any beta exams that Microsoft makes available that fall into my skill set.  Microsoft has started a blog to announce these and the seats usually fill up really quick.  The blog is at http://blogs.technet.com/betaexams/ . You don’t get your results instantly, like a normal exam, instead you have to wait for everyone to finish taking the beta exams and for Microsoft to determine which questions they are using and which they are dropping.  So, be prepared to wait six to eight weeks for your results.

    Read the article

  • Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

    - by ultan o'broin
    Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

    Read the article

  • Fun tips with Analytics

    - by user12620172
    If you read this blog, I am assuming you are at least familiar with the Analytic functions in the ZFSSA. They are basically amazing, very powerful and deep. However, you may not be aware of some great, hidden functions inside the Analytic screen. Once you open a metric, the toolbar looks like this: Now, I’m not going over every tool, as we have done that before, and you can hover your mouse over them and they will tell you what they do. But…. Check this out. Open a metric (CPU Percent Utilization works fine), and click on the “Hour” button, which is the 2nd clock icon. That’s easy, you are now looking at the last hour of data. Now, hold down your ‘Shift’ key, and click it again. Now you are looking at 2 hours of data. Hold down Shift and click it again, and you are looking at 3 hours of data. Are you catching on yet? You can do this with not only the ‘Hour’ button, but also with the ‘Minute’, ‘Day’, ‘Week’, and the ‘Month’ buttons. Very cool. It also works with the ‘Show Minimum’ and ‘Show Maximum’ buttons, allowing you to go to the next iteration of either of those. One last button you can Shift-click is the handy ‘Drill’ button. This button usually drills down on one specific aspect of your metric. If you Shift-click it, it will display a “Rainbow Highlight” of the current metric. This works best if this metric has many ‘Range Average’ items in the left-hand window. Give it a shot. Also, one will sometimes click on a certain second of data in the graph, like this:  In this case, I clicked 4:57 and 21 seconds, and the 'Range Average' on the left went away, and was replaced by the time stamp. It seems at this point to some people that you are now stuck, and can not get back to an average for the whole chart. However, you can actually click on the actual time stamp of "4:57:21" right above the chart. Even though your mouse does not change into the typical browser finger that most links look like, you can click it, and it will change your range back to the full metric. Another trick you may like is to save a certain view or look of a group of graphs. Most of you know you can save a worksheet, but did you know you could Sync them, Pause them, and then Save it? This will save the paused state, allowing you to view it forever the way you see it now.  Heatmaps. Heatmaps are cool, and look like this:  Some metrics use them and some don't. If you have one, and wish to zoom it vertically, try this. Open a heatmap metric like my example above (I believe every metric that deals with latency will show as a heatmap). Select one or two of the ranges on the left. Click the "Change Outlier Elimination" button. Click it again and check out what it does.  Enjoy. Perhaps my next blog entry will be the best Analytic metrics to keep your eyes on, and how you can use the Alerts feature to watch them for you. Steve 

    Read the article

  • Dependency Injection Introduction

    - by MarkPearl
    I recently was going over a great book called “Dependency Injection in .Net” by Mark Seeman. So far I have really enjoyed the book and would recommend anyone looking to get into DI to give it a read. Today I thought I would blog about the first example Mark gives in his book to illustrate some of the benefits that DI provides. The ones he lists are Late binding Extensibility Parallel Development Maintainability Testability To illustrate some of these benefits he gives a HelloWorld example using DI that illustrates some of the basic principles. It goes something like this… class Program { static void Main(string[] args) { var writer = new ConsoleMessageWriter(); var salutation = new Salutation(writer); salutation.Exclaim(); Console.ReadLine(); } } public interface IMessageWriter { void Write(string message); } public class ConsoleMessageWriter : IMessageWriter { public void Write(string message) { Console.WriteLine(message); } } public class Salutation { private readonly IMessageWriter _writer; public Salutation(IMessageWriter writer) { _writer = writer; } public void Exclaim() { _writer.Write("Hello World"); } }   If you had asked me a few years ago if I had thought this was a good approach to solving the HelloWorld problem I would have resounded “No”. How could the above be better than the following…. class Program { static void Main(string[] args) { Console.WriteLine("Hello World"); Console.ReadLine(); } }  Today, my mind-set has changed because of the pain of past programs. So often we can look at a small snippet of code and make judgements when we need to keep in mind that we will most probably be implementing these patterns in projects with hundreds of thousands of lines of code and in projects that we have tests that we don’t want to break and that’s where the first solution outshines the latter. Let’s see if the first example achieves some of the outcomes that were listed as benefits of DI. Could I test the first solution easily? Yes… We could write something like the following using NUnit and RhinoMocks… [TestFixture] public class SalutationTests { [Test] public void ExclaimWillWriteCorrectMessageToMessageWriter() { var writerMock = MockRepository.GenerateMock<IMessageWriter>(); var sut = new Salutation(writerMock); sut.Exclaim(); writerMock.AssertWasCalled(x => x.Write("Hello World")); } }   This would test the existing code fine. Let’s say we then wanted to extend the original solution so that we had a secure message writer. We could write a class like the following… public class SecureMessageWriter : IMessageWriter { private readonly IMessageWriter _writer; private readonly string _secretPassword; public SecureMessageWriter(IMessageWriter writer, string secretPassword) { _writer = writer; _secretPassword = secretPassword; } public void Write(string message) { if (_secretPassword == "Mark") { _writer.Write(message); } else { _writer.Write("Unauthenticated"); } } }   And then extend our implementation of the program as follows… class Program { static void Main(string[] args) { var writer = new SecureMessageWriter(new ConsoleMessageWriter(), "Mark"); var salutation = new Salutation(writer); salutation.Exclaim(); Console.ReadLine(); } }   Our application has now been successfully extended and yet we did very little code change. In addition, our existing tests did not break and we would just need add tests for the extended functionality. Would this approach allow parallel development? Well, I am in two camps on parallel development but with some planning ahead of time it would allow for it as you would simply need to decide on the interface signature and could then have teams develop different sections programming to that interface. So,this was really just a quick intro to some of the basic concepts of DI that Mark introduces very successfully in his book. I am hoping to blog about this further as I continue through the book to list some of the more complex implementations of containers.

    Read the article

  • Web Service Example - Part 3: Asynchronous

    - by Denis T
    In this edition of the ADF Mobile blog we'll tackle part 3 of our Web Service examples.  In this posting we'll take a look at firing the web service asynchronously and then filling in the UI when it completes.  This can be useful when you have data on the device in a local store and want to show that to the user while the application uses lazy loading from a web service to load more data. Getting the sample code: Just click here to download a zip of the entire project.  You can unzip it and load it into JDeveloper and deploy it either to iOS or Android.  Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed.  Note: This is a different workspace than WS-Part2 What's different? In this example, when you click the Search button on the Forecast By Zip option, now it takes you directly to the results page, which is initially blank.  When the web service returns a second or two later the data pops into the UI.  If you go back to the search page and hit Search it will again clear the results and invoke the web service asynchronously.  This isn't really that useful for this particular example but it shows an important technique that can be used for other use cases. How it was done 1)  First we created a new class, ForecastWorker, that implements the Runnable interface.  This is used as our worker class that we create an instance of and pass to a new thread that we create when the Search button is pressed inside the retrieveForecast actionListener handler.  Once the thread is started, the retrieveForecast returns immediately.  2)  The rest of the code that we had previously in the retrieveForecast method has now been moved to the retrieveForecastAsync.  Note that we've also added synchronized specifiers on both these methods so they are protected from re-entrancy. 3)  The run method of the ForecastWorker class then calls the retrieveForecastAsync method.  This executes the web service code that we had previously, but now on a separate thread so the UI is not locked.  If we had already shown data on the screen it would have appeared before this was invoked.  Note that you do not see a loading indicator either because this is on a separate thread and nothing is blocked. 4)  The last but very important aspect of this method is that once we update data in the collections from the data we retrieve from the web service, we call AdfmfJavaUtilities.flushDataChangeEvents().   We need this because as data is updated in the background thread, those data change events are not propagated to the main thread until you explicitly flush them.  As soon as you do this, the UI will get updated if any changes have been queued. Summary of Fundamental Changes In This Application The most fundamental change is that we are invoking and handling our web services in a background thread and updating the UI when the data returns.  This allows an application to provide a better user experience in many cases because data that is already available locally is displayed while lengthy queries or web service calls can be done in the background and the UI updated when they return.  There are many different use cases for background threads and this is just one example of optimizing the user experience and generating a better mobile application. 

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Understanding the Value of SOA

    - by Mala Narasimharajan
    Written By: Debra Lilley, ACE Director, Fusion Applications Again I want to talk from my area of expertise of Fusion Applications and talk about their design fundamentals. If you look at the table below and start at the bottom Oracle have defined all of the business objects e.g. accounts, people, customers, invoices etc. used by Fusion Applications; each of these objects contain all of the information required and can be expanded if necessary.  That Oracle have created for each of these business objects every action that is needed for the applications e.g. all the actions to create a new customer, checking to see if it exists, credit checking with D&B (Dun & Bradstreet < http://www.dnb.co.uk/> ) , creating the record, notifying those required etc. Each of these actions is a stand-alone web service. Again you can create a new actions or subscribe to an external provided web service e.g. the D&B check. The diagram also shows that all of development of Fusion Applications is from their Fusion Middleware offerings. Then the Intelligent Business Process is the order in which you run these actions, this is Service Orientated Architecture, SOA. Not only is SOA used to orchestrate actions within Fusion Applications it is also used in the integration of Fusion Applications with the rest of the Oracle stable of applications such as EBS, PeopleSoft, JDE and Siebel. The other applications are written with propriety development tools so how do they work with SOA? It’s a very simple answer, with the introduction of the Oracle SOA platform each process within these applications was made available to be called as a web service. I won’t go into technically how that is done but what’s known as a wrapper to allow each of them to act in this way was added. Finally at the top of the diagram are the questions that each Fusion Application process must answer, and this is the ‘special’ sauce that makes them so good, the User Experience, but that is a topic for another day, or you can read about it in my blog http://debrasoracle.blogspot.co.uk/2014/04/going-on-record-about-fusion-apps-cloud.html or Oracle’s own UX blog https://blogs.oracle.com/usableapps/ The concept behind AppAdvantage is not new the idea that Oracle technology can add value to your Oracle applications investments is pretty fundamental. Nishit Rao who is in AppAdvantage team provided myself and other ACE Directors with demo kits so that we could demonstrate SOA running with the applications. The example I learnt to build was that of the EBS inventory open interface. The simple concept is that request records can be added to a table and an import run that creates these as transactions in inventory. What’s SOA allows you to do is to add to the table from any source and then run this process automatically whereas traditionally you had to run the process at regular intervals because you didn’t know if the table was empty or not. This may just sound like a different way of doing the same thing but if the process is critical for your business then the interval was very small and the process run potentially many times unnecessarily. Using SOA it only happened when necessary without any delay. So in my post today I’ve talked about how SOA is used with Fusion Applications and in the linking with more traditional applications but that is only the tip of the iceberg of potential, your applications are just part of your IT systems and SOA can orchestrate your data across all of them; the beauty of open standards.  Debra Lilley, Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director.  Lilley has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Lead and Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts

    Read the article

  • ADF page security - the untold password rule

    - by ankuchak
    I'm kinda new to Oracle ADF. So, in this blog post I'm going to share something with you that I faced (and recovered from) recently. Initially I thought if I should at all put a blog post on this, because it's totally simple. Still, simplicity is a relative term. So without wasting further time, let's kick off.    I was exploring the ADF security aspect to secure a page through html basic authentication. The idea is very simple and the credential store etc. come into picture. But I was not able to run a successful test of this phenomenally simple thing even after trying for over 30 minutes. This is what I did.   I created a simple jsf page and put a panel in it. And I put a simple el to show the current user name.  Next I created a user that I should test with. I named the password as myuser, just to keep it simple. Then I created an enterprise role and mapped the user that I just created. Then I created an application role and mapped the enterprise role to it. Then I mapped the resource, the simple jsf page in this case, to this application role. This way, only users with the given application role can only access this page (as if you didn't know this duh!).  Of course, I had to create the page definition for the page before I could map it to an application role. What else! done! Then I hit the run menu item and it all went well...   Until... I got this message. I put the correct credentials repeatedly 2-3 times. Still I got the same error. Why? I didn't get any error message during the deployment. nope.  Then, as I said before, I spent over 30 minutes trying different things out, things like mapping only the user(not the role) to the page, changing the context root etc. Nothing worked!  Then of course, I bothered to look at the logs and found this. See the first red line. That says it all. So the problem was with that password. The password must have at least one special character and one digit in it. I think I was misled by the missing password hint/rule and the fact that the deployment didn't fail even if the user was not created properly. Well, yes, I agree that I was fool enough not to look at the logs.  Later I changed the password to something like myuser123# . And it worked. I hope it helped.

    Read the article

  • Delegates: A Practical Understanding

    - by samerpaul
    It's been a while since I have written on this blog, and I'm planning on reviving it this summer, since I have more time to do so again.I've also recently started working on the iPhone platform, so I haven't been as busy in .NET as before.In either case, today's blog post applies to both C# and Objective-C, because it's more about a practical understanding of delegates than it is about code. When I was learning coding, I felt like delegates was one of the hardest things to conceptually understand, and a lot of books don't really do a good job (in my opinion) of explaining it. So here's my stab at it.A Real Life Example of DelegatesLet's say there are three of you. You, your friend, and your brother. You're each in a different room in your house so you can't hear each other, even if you shout. 1)You are playing a computer game2) Friend is building a puzzle3) Brother is nappingNow, you three are going to stay in your room but you want to be informed if anything interesting is happening to the one of you. Let's say you (playing the computer game) want to know when your brother wakes up.You could keep walking to the room, checking to see if he's napping, and then walking back to your room. But that would waste a lot of time / resources, and what if you miss when he's awake before he goes back to sleep? That would be bad.Instead, you hand him a 2-way radio that works between your room and his room. And you inform him that when he wakes up, he should press a button on the radio and say "I'm awake". You are going to be listening to that radio, waiting for him to say he's awake. This, in essence, is how a delegate works.You're creating an "object" (the radio) that allows you to listen in on an event you specify. You don't want him to send any other messages to you right now, except when he wakes up. And you want to know immediately when he does, so you can go over to his room and say hi. (the methods that are called when a delegate event fires). You're also currently specifying that only you are listening on his radio.Let's say you want your friend to come into the room at the same time as you, and do something else entirely, like fluff your brother's pillow. You will then give him an identical radio, that also hooks into your brother's radio, and inform him to wait and listen for the "i'm awake" signal.Then, when your brother wakes up, he says "I'm awake!" and both you and your friend walk into the room. You say hi, and your friend fluffs the pillow, then you both exit.Later, if you decide you don't care to say hi anymore, you turn off your radio. Now, you have no idea when your brother is awake or not, because you aren't listening anymore.So again, you are each classes in this example, and each of you have your own methods. You're playing a computer game (PlayComputerGame()), your friend is building a puzzle (BuildPuzzle()) and your brother is napping (Napping()). You create a delegate (ImAwake) that you set your brother to do, when he wakes up. You listen in on that delegate (giving yourself a radio and turning it on), and when you receive the message, you fire a new method called SayHi()). Your friend is also wired up to the same delegate (using an identical radio) and fires the method FluffPillow().Hopefully this makes sense, and helps shed some light on how delegates operate. Let me know! Feel free to drop me a line at Twitter (preferred method of contact) here: samerabousalbi

    Read the article

  • InvalidOperationException when calling SaveChanges in .NET Entity framework

    - by Pär Björklund
    Hi, I'm trying to learn how to use the Entity framework but I've hit an issue I can't solve. What I'm doing is that I'm walking through a list of Movies that I have and inserts each one into a simple database. This is the code I'm using private void AddMovies(DirectoryInfo dir) { MovieEntities db = new MovieEntities(); foreach (DirectoryInfo d in dir.GetDirectories()) { Movie m = new Movie { Name = d.Name, Path = dir.FullName }; db.AddToMovies(movie); } db.SaveChanges(); } When I do this I get an exception at db.SaveChanges() that read. The changes to the database were committed successfully, but an error occurred while updating the object context. The ObjectContext might be in an inconsistent state. Inner exception message: AcceptChanges cannot continue because the object's key values conflict with another object in the ObjectStateManager. Make sure that the key values are unique before calling AcceptChanges. I haven't been able to find out what's causing this issue. My database table contains three columns Id int autoincrement Name nchar(255) Path nchar(255) Update: I Checked my edmx file and the SSDL section have the StoreGeneratedPattern="Identity" as suggested. I also followed the blog post and tried to add ClientAutoGenerated="true" and StoreGenerated="true" in the CSDL as suggested there. This resulted in compile errors ( Error 5: The 'ClientAutoGenerated' attribute is not allowed.). Since the blog post is from 2006 and it has a link to a follow up post I assume it's been changed. However, I cannot read the followup post since it seems to require an msdn account.

    Read the article

  • Return template as string - Django

    - by Ninefingers
    Hi All, I'm still not sure this is the correct way to go about this, maybe not, but I'll ask anyway. I'd like to re-write wordpress (justification: because I can) albeit more simply myself in Django and I'm looking to be able to configure elements in different ways on the page. So for example I might have: Blog models A site update message model A latest comments model. Now, for each page on the site I want the user to be able to choose the order of and any items that go on it. In my thought process, this would work something like: class Page(models.Model) Slug = models.CharField(max_length=100) class PageItem(models.Model) Page = models.ForeignKey(Page) ItemType = models.CharField(max_length=100) InstanceNum = models.IntegerField() # all models have primary keys. Then, ideally, my template would loop through all the PageItems in a page which is easy enough to do. But what if my page item is a site update as opposed to a blog post? Basically, I am thinking I'd like to pull different item types back in different orders and display them using the appropriate templates. Now, I thought one way to do this would be to, in views.py, to loop through all of the objects and call the appropriate view function, return a bit of html as a string and then pipe that into the resultant template. My question is - is this the best way to go about doing things? If so, how do I do it? If not, which way should I be going? I'm pretty new to Django so I'm still learning what it can and can't do, so please bear with me. I've checked SO for dupes and don't think this has been asked before...

    Read the article

  • Using SSIS Web Service Task with WCF

    - by Omri
    Hello, I am using SQL Server 2008 SSIS for importing data to the DB and .Net 3.5 SP1 for Creating the WCF service. In the import task I am trying to use the Web Service Task to report to a WCF service. At first I encountered a problem with the WCF WSDL, the Web Service task couldn't get their code generated from the metadata exposed by the WCF service. So I found a blog post at Christian Weyer's Blog talking just about that. Now after I can successfully load a WCF service to the Web Service Task and get the functions generated just fine from the WSDL I encountered another problem. I get an error from the SSIS package at runtime saying that "Method 'ProxyNamespace.MyService.GetData' not found." The full Error is: Error: 0xC002F304 at Web Service Task False, Web Service Task: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.MyService.GetData' not found.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()". I know that the simple solution is going back to regular Web Service, but I really don't want to go there. Thanks, Omri.

    Read the article

  • Support for nested model and class validation with ASP.NET MVC 2.0

    - by Diep-Vriezer
    I'm trying to validate a model containing other objects with validation rules using the System.ComponentModel.DataAnnotations attributes was hoping the default MVC implementation would suffice: var obj = js.Deserialize(json, objectInfo.ObjectType); if(!TryValidateModel(obj)) { // Handle failed model validation. } The object is composed of primitive types but also contains other classes which also use DataAnnotications. Like so: public class Entry { [Required] public Person Subscriber { get; set; } [Required] public String Company { get; set; } } public class Person { public String FirstName { get; set;} [Required] public String Surname { get; set; } } The problem is that the ASP.NET MVC validation only goes down 1 level and only evaluates the properties of the top level class, as can be read on digitallycreated.net/Blog/54/deep-inside-asp.net-mvc-2-model-metadata-and-validation. Does anyone know an elegant solution to this? I've tried xVal, but they seem to use a non-recursive pattern (http://blog.stevensanderson.com/2009/01/10/xval-a-validation-framework-for-aspnet-mvc/). Someone must have run into this problem before right? Nesting objects in your model doesn't seem so weird if you're designing a web service.

    Read the article

  • parsed xml file: skip creation if blank?

    - by GoodGets
    This could be a HappyMapper specific question, but I don't think so. In my app, users can upload their blog subscriptions (via an OPML file), which I parse and add to their profile. The only problem is during the parsing, or more specifically the creation of each subscription, I can't figure out how to skip over entries that are just "labels". Since OPML files allow you to label your blogs, or organize them into folders, this is my problem. The actual blog subscriptions and their labels both have "outline" tags. <outline text="Rails" > <outline title="Katz Got Your Tongue?" text="Katz Got Your Tongue?" htmlUrl="http://yehudakatz.com" type="rss" xmlUrl="http://feeds.feedburner.com/KatzGotYourTongue" /> After parsing, I create each feed via a method call inside of the HappyMapper module def create_feed Feed.new( :feed_htmlUrl => self.htmlUrl, :feed_title => self.title, ... But how do I prevent it from creating new "feeds" for those outline tags that are just tags? (i.e. those that don't have an htmlUrl?)

    Read the article

  • Fluid CSS: float column with overflow

    - by Ates Goral
    I'm using a fluid layout in the new theme that I'm working on for my blog. I often blog about code and include <pre> blocks within the posts. The float: left column for the content area has a max-width so that the column stops at a certain maximum width and can also be shrunk: +----------+ +------+ | text | | text | | | | | | | | | | | | | | | | | | | | | +----------+ +------+ max shrunk What I want is for the <pre> elements to be wider than the text column so that I can fit 80-character-wrapped code without horizontal scroll bars. But I want the <pre> elements to overflow from the content area, without affecting its fluidity: +----------+ +------+ | text | | text | | | | | +----------+--+ +------+------+ | code | | code | +----------+--+ +------+------+ | | | | +----------+ +------+ max shrunk But, max-width stops being fluid once I insert the overhanging <pre> in there: the width of the column remains at the specified max-width even when I shrink the browser beyond that width. I've played around with a bare-minimum scenario to reproduce the problem and noticed that doing either of the following brings back the fluidity: Remove the <pre> (doh...) Remove the float: left The workaround I'm currently using is to insert the <pre> elements into "breaks" in the post column, so that the widths of the post segments and the <pre> segments are managed mutually exclusively: +----------+ +------+ | text | | text | +----------+ +------+ +-------------+ +-------------+ | code | | code | +-------------+ +-------------+ +----------+ +------+ +----------+ +------+ max shrunk But this forces me to insert additional closing and opening <div> elements into the post text which I'd rather keep semantically pristine. Admittedly, I don't have a full grasp of how the box model works with floats with overflowing content, so I don't understand why the combination of float: left on the container and the <pre> inside it cripple the max-width of the container. I'm observing the same problem on Firefox/Chrome/Safari/Opera. IE6 (the crazy one) seems happy all the time. This also doesn't seem dependent on quirks/standards mode.

    Read the article

  • Zend_Feed_Reader Not supported Schema

    - by LookUp Webmaster
    Hello, I'm using Zend FW and wanted to make a feed reader. I did the following: $feed = Zend_Feed_Reader::import('feed://blog.lookup.cl/?feed=rss2'); $data = array( 'title' => $feed->getTitle(), 'link' => $feed->getLink(), 'dateModified' => $feed->getDateModified(), 'description' => $feed->getDescription(), 'language' => $feed->getLanguage(), 'entries' => array(), ); foreach ($feed as $entry) { $edata = array( 'title' => $entry->getTitle(), 'description' => $entry->getDescription(), 'dateModified' => $entry->getDateModified(), 'authors' => $entry->getAuthors(), 'link' => $entry->getLink(), 'content' => $entry->getContent() ); $data['entries'][] = $edata; } And it throws the following exception: Scheme "feed" is not supported The blog was made using Wordpress. What's wrong? If "feed it's not supported", how can I change the type of feed that Wordpress does? Thanks in advance, Take care,

    Read the article

  • Guaranteed way to find the ildasm.exe and ilasm.exe files regardless of .NET version/environment?

    - by m-y
    Is there a way to programmatically get the FileInfo/Path of the ildasm.exe/ilasm.exe executables? I'm attempting to decompile and recompile a dll/exe file appropriately after making some alterations to it (I'm guessing PostSharp does something similar to alter the IL after the compilation). I found a blog post that pointed to: var pfDir = Environment.GetFolderPath(Environment.SpecialFolders.ProgramFiles)); var sdkDir = Path.Combine(pfDir, @"Microsoft SDKs\Windows\v6.0A\bin"); ... However, when I ran this code the directory did not exist (mainly because my SDK version is 7.1), so on my local machine the correct path is @"Microsoft SDKs\Windows\v7.1\bin". How do I ensure I can actually find the ildasm.exe? Similarly, I found another blog post on how to get access to ilasm.exe as: string windows = Environment.GetFolderPath(Environment.SpecialFolder.System); string fwork = Path.Combine(windows, @"..\Microsoft.NET\Framework\v2.0.50727"); ... While this works, I noticed that I have Framework and Framework64, and within Framework itself I have all of the versions up to v4.0.30319 (same with Framework64). So, how do I know which one to use? Should it be based on the .NET Framework version I'm targetting? Summary: How do I appropriately guarantee to find the correct path to ildasm.exe? How do I appropriately select the correct ilasm.exe to compile?

    Read the article

  • OData / WCF Data Service - HTTP 500 Error

    - by Eric
    I have created an OData/WCF service using Visual Studio 2010 on Windows XP SP3 with all current patches installed. When I click on "view in browser", the service opens and I see the 3 tables from my EF model. However, when I add a table name ("Commands" in this case) to the end of the query string, rather than seeing the data from the table, I get an HTTP 500 error. (This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.). I have not only followed the examples from 2 sites, but have also tried running the sample application that the blog poster sent me (that works on his machine), and still am not having any luck. The blog post is at Exposing OData from an Entity Framework Model Does anyone have an idea why this is occurring and how to resolve it? Here is the output of the "View in Browser": <?xml version="1.0" encoding="utf-8" standalone="yes" ?> - <service xml:base="http://localhost:1883/VistaDBCommandService.svc/" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:app="http://www.w3.org/2007/app" xmlns="http://www.w3.org/2007/app"> - <workspace> <atom:title>Default</atom:title> - <collection href="Commands"> <atom:title>Commands</atom:title> </collection> - <collection href="Databases"> <atom:title>Databases</atom:title> </collection> - <collection href="Statuses"> <atom:title>Statuses</atom:title> </collection> </workspace> </service> ============================= Thanks, Eric

    Read the article

  • google appengine local datastore integration testing with spring

    - by mirror303
    Hi all, I want to write some integration tests to see how my spring-managed DAO's behave when talking to the appengine datastore. Following the spring manual I will be providing my test-classes with the proper annotations: @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations = { "classpath:applicationContext.xml" }) After a lot of browsing I found this blog post dating back to august '09 from somebody doing exactly what I want to achieve. It involves writing a TestEnvironment class that implements ApiProxy.Environment plus talking to ApiProxyLocalImpl. However, if I look at the current docs (for version 1.3.1), it seems that this has been replaced by newing an instance of the framework provided LocalDatastoreServiceTestConfig which is passed to a LocalServiceTestHelper. It is too bad that the appengine docs don't show an example how to do this with JPA because then the spring wiring would be trivial. Trying to follow the route outlined in the blog posting has me running into a compiler messages telling me that classes such as ApiProxyLocalImpl are not visible by me. Hence, there must be a new way of doing it, which probably involves the LocalServiceTestHelper. My question: Does anybody know how? I know I will need to configure an EntityManagerFactory and provide it with the Datastore connection somehow... but how? :)

    Read the article

  • What vertex shader code should be used for a pixel shader used for simple 2D SpriteBatch drawing in XNA?

    - by Michael
    Preface First of all, why is a vertex shader required for a SilverlightEffect (.slfx file) in Silverlight 5? I'm trying to port a simple 2D XNA game to Silverlight 5 RC, and I would like to use a basic pixel shader. This shader works great in XNA for Windows and Xbox, but I can't get it to compile with Silverlight as a SilverlightEffect. The MS blog for the Silverlight Toolkit says that "there is no difference between .slfx and .fx", but apparently this isn't quite true -- or at least SpriteBatch is working some magic for us in "regular XNA", and it isn't in "Silverlight XNA". If I try to directly copy my pixel shader file into a Silverlight project (and change it to the supported "Effect - Silverlight" importer/processor), when I try to compile I see the following error message: Invalid effect file. Unable to find vertex shader in pass "P0" Indeed, there isn't a vertex shader in my pixel shader file. I haven't needed one with my other 2D XNA apps since I'm just doing basic SpriteBatch drawing. I tried adding a vertex shader to my shader file, using Remi Gillig's comment on this Shawn Hargreaves blog post for guidance, but it doesn't quite work. The shader file successfully compiles, and I see some semblance of my game on screen, but it's tiny, twisted, repeated, and all jumbled up. So clearly something's not quite right. The Real Question So that brings me to my real question: Since a vertex shader is required, is there a basic vertex shader function that works for simple 2D SpriteBatch drawing? And if the vertex shader requires world/view/project matricies as parameters, what values am I supposed to use for a 2D game? Can any shader pros help? Thanks!

    Read the article

  • appengine local datastore integration testing with spring

    - by mirror303
    Hi all, I want to write some integration tests to see how my spring-managed DAO's behave when talking to the appengine datastore. Following the spring manual I will be providing my test-classes with the proper annotations: @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations = { "classpath:applicationContext.xml" }) After a lot of browsing I found this blog post dating back to august '09 from somebody doing exactly what I want to achieve. It involves writing a TestEnvironment class that implements ApiProxy.Environment plus talking to ApiProxyLocalImpl. However, if I look at the current docs (for version 1.3.1), it seems that this has been replaced by newing an instance of the framework provided LocalDatastoreServiceTestConfig which is passed to a LocalServiceTestHelper. It is too bad that the appengine docs don't show an example how to do this with JPA because then the spring wiring would be trivial. Trying to follow the route outlined in the blog posting has me running into a compiler messages telling me that classes such as ApiProxyLocalImpl are not visible by me. Hence, there must be a new way of doing it, which probably involves the LocalServiceTestHelper. My question: Does anybody know how? I know I will need to configure an EntityManagerFactory and provide it with the Datastore connection somehow... but how? :)

    Read the article

  • x-dom-event-stream in Opera 10 Only Working on First Event

    - by Brad
    I have a python script (in the CherryPy framework) that sends Event: and data: text as this Opera blog post describes to a client browser. The javascript that recieves the x-dom-event-stream content is almost identical to what they show in the blog post. However, the browser displays only the first event sent. Anyone know what I'm missing? I tried a few older versions of Opera and found that it works in Opera 9.52 but not in any newer versions. What did they change? Here is the python code: class dumpData(object): def index(self): cherrypy.response.headers['Content-Type'] = "application/x-dom-event-stream" def yieldData(): i = 0 while 1: yield "Event: count\n" yield "data: " yield i yield "\n\n" i = i + 1 time.sleep(3); return yieldData() index._cp_config = {'response.stream': True} index.exposed = True And here is the javascript/html. Making a request to /data/ runs the python function above. <head> <script> onload = function() { document.getElementById("count").addEventListener("cout", cout, false); } function count(e) { document.getElementById("stream").firstChild.nodeValue = e.data; } </script> <event-source id="count" src="/data/"> </head> <body> <div id="stream"></div> </body> Opening the direct /data/ url in Firefox saves the stream to a file. So I know the output is in the correct format and that the stream works at all.

    Read the article

  • IIS: How to get the Metabase path?

    - by Ian Boyd
    i'm trying to get the list of mime types known to an IIS server (which you can see was asked and and answered by me 2 years ago). The copy-pasted answer involves: GetObject("IIS://LocalHost/MimeMap") msdn GetObject("IIS://localhost/mimemap") KB246068 GetObject("IIS://localhost/MimeMap") Scott Hanselman's Blog new DirectoryEntry("IIS://Localhost/MimeMap")) Stack Overflow new DirectoryEntry("IIS://Localhost/MimeMap")) Stack Overflow New DirectoryServices.DirectoryEntry("IIS://localhost/MimeMap") Velocity Reviews You get the idea. Everyone agrees that you use a magical path iis://localhost/mimemap. And this works great, except for the times when it doesn't. The only clue i can find as to why it fails, is from an IIS MVP, Chris Crowe's, blog: string ServerName = "LocalHost"; string MetabasePath = "IIS://" + ServerName + "/MimeMap"; // Note: This could also be something like // string MetabasePath = "IIS://" + ServerName + "/w3svc/1/root"; DirectoryEntry MimeMap = new DirectoryEntry(MetabasePath); There are two clues here: He calls iis://localhost/mimemap the Metabase Path. Which sounds to me like it is some sort of "path" to a "metabase". He says that the path to the metabase could be something else; and he gives an example of what it could be like. Right now i, and the entire planet, are hardcoding the "MetabasePath" as iis://localhost/MimeMap What should it really be? What should the code be doing to construct a valid MetabasePath? Note: i'm not getting an access denied error, the error is the same when you have an invalid MetabasePath, e.g. iis://localhost/SoTiredOfThis

    Read the article

  • Posting source code in blogger- fails with C# containers

    - by Lirik
    I tried the solutions that are posted in this related SO question and for the most part the code snippets are working, but there are some cases that are still getting garbled by Blogger when it publishes the blog. In particular, declaring generic containers seems to be most troublesome. Please see the code examples on my blog and in particular the section where I define the dictionary (http://mlai-lirik.blogspot.com/). I want to display this: static Dictionary<int, List<Delegate>> _delegate = new Dictionary<int,List<Delegate>>(); But blogger publishes this: static Dictionary<int, list=""><delegate>> _delegate = new Dictionary<int, list=""><delegate>>(); And it caps the end of my code section with this: </delegate></delegate></int,></delegate></int,> Apparently blogger thinks that the <int and <delegate> portion of the dictionary are some sort of HTML tags and it automatically attempts to close them at the end of the code snippet. Does anybody know how to get around this problem?

    Read the article

  • Ordering view by highest group count question - Ruby on Rails

    - by bgadoci
    I've read the couple of questions about this on stack overflow but can't seem to find the answer. I am trying to display the tags in my blog by the ones with the highest count in the tags table. Thanks to KandadaBoggu for helping me get the tags feature of the blog I am designing working. Here is the basics and my question. Tag belongs_to :post and Post has_many :tags. The tags table is simple really, consisting of the normal scaffolded fields plus post_id and tag_name (I actually called the column 'tag_name' instead of just 'name'). in my /views/posts/index.html/erb file I correctly am displaying the tags by group and the amount of times they are being used (appearing in the tags table). I just want to know how to order them by the highest count. Here is the code, and I currently have it set to updated_at: PostsController def index @tag_counts = Tag.count(:group => :tag_name, :order => 'updated_at DESC', :limit => 10) conditions, joins = {}, nil unless(params[:tag_name] || "").empty? conditions = ["tags.tag_name = ? ", params[:tag_name]] joins = :tags end @posts=Post.all(:joins => joins, :conditions=> conditions, :order => 'created_at DESC').paginate :page => params[:page], :per_page => 5 respond_to do |format| format.html # index.html.erb format.xml { render :xml => @posts } format.json { render :json => @posts } format.atom end end

    Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >