Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 204/328 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Windows media player 12 not launching from custom program

  - by Supertrolly

  There is a program we use for testing that calls windows media player and plays a media file. The problem is that windows media player fails to load unless you open and close it before starting the program. After that the program will open it every time without a hitch but after a reboot it is lost and you must do it again. My question is what could be voilate setting could windows media player have that would be lost on a reboot? I have tried programs like Regshot to capture changes to the registry that might be delated on reboot. The code for the program is very straight forward simply calling windows media player with a parameter with the media to play. Using process montior I have determined that is is crashing shortly after the program executes it. I am at a lost on this problem as I can not find what if anything it is changing to run windows media player.

  Read the article

• I am trying to write an htaccess file performs authentication and redirects authenticated users to a

  - by racl101

  This is what I have so far but I can't get the RewriteCond and RewriteRule properly. RewriteEngine On RewriteCond %{LA-U:REMOTE_USER} (\d{3})$ RewriteRule !^%1 http://subdomain.mydomain.com/%1 [R,L]. AuthName "My Domain Protected Area" AuthType Basic AuthUserFile /path/to/my/.htpasswd Require valid-user This is what I mean the ReWriteCond and RewriteRule to say: "If the REMOTE_USER has a username ending in 3 digits then capture the three digits that match and for whatever url they are trying to access if it does not start with the 3 digits captured then redirect them to the sub directory with the name equal to those captured three digits." In other words, if a user named 'johnny202' is authenticated then if he's requesting any directory other than http://subdomain.mydomain.com/202/ then he should be redirected to http://subdomain.mydomain.com/202/ The only thing I can think of that is wrong is the first instance of '%1'.

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• "IP May Be Forged" - Sendmail Warning

  - by Mikey B

  CentOS 5.x | SendMail 8 Can I get clarification on what exactly the warning "IP may be forged" means and what conditions cause it? I recently configured SendMail to relay email from my exchange server and it's showing that warning in the logs. The messages get delivered fine but I don't like the warnings. I originally thought that there was an inconsistency between the servername used in the EHLO statement from Exchange and the respective PTR record for the source IP for Exchange. But upon examining a packet capture, I see exchange using "EHLO domain.com" and that the source IP has a PTR of "domain.com". Maybe sendmail doesn't like that the greeting only has the domain? -M

  Read the article

• Problems with XP, Office, and PC in general - any ideas?

  - by molecule

  Hi all This may not make a whole lot of sense so pls bear with me... I am about to perform a routine check on one of my user's PC. Some background - the PC has a Xeon processor and 4Gb of RAM and running XP SP3 He has 2xHDD and pagefile is hosted on the secondary HDD (D:) and min/max values are set to 4096. NO pagefile on C: This user has 6 monitors so he has an NVIDIA Quadro NVS440 hosting 4xmonitors and an NVIDIA Quadro NVS290 hosting 2xmonitors. There is a video card driver from NVIDIA which is compatible with both NVS440 and NVS290 and he is on the latest version of that driver. (Note: Make of video cards are different - one is from leadtek and the other from Nvidia) He is a heavy Bloomberg, Outlook, Word, and Excel user and runs two Citrix applications. Other apps are FoxIt PDF and IE. Problems - Outlook and Excel frequently crashes - I am going to perform an Outlook and Excel repair and also check/remove unnecessary addins - will he lose any customizations if I repaired and chose "Restore my shortcuts while repairing" and do not select "Discard my customized settings and restore default settings". Does repair really repair anything? FYI - It stopped crashing ever since i moved a large spreadsheet he has open to his local HDD instead of over the network. This spreadsheet "refreshes" constantly as it is pulling live data to update cells and I suspect it was auto-saving so frequently that it caused crashes if saving over the network. At times, his right click completely fails to respond. His left click works fine but he can't right click on anything in any Window and even on the desktop. Sometimes, he needs to start to close certain applications such as Adobe and the right click will start functioning again. I removed Adobe and installed FoxIt as I figured it was a resource issue but I do not think so as he does have sufficient resources when the problem is happening. Sometimes he can't bring task manager up until he kills certain apps. Definitely sounds like a resource issue but I am not confident that is the root cause. Also not sure if this is related to one of the apps installed but his Start bar flickers (does not completely disappear) intermittently from time to time. The taskbar icons which are hidden appear and then get hidden again as if it was having "fits". I have performed reg scans, malware scans etc but problems do not go away. I am planning to perform sfc /scannow and office repair but would like to know if anyone has any other suggestions. What about setting a "small" pagefile on C:. I have heard that this is recommended and may be the reason why a minidmp file was not generated when he encountered a blue screen. Also, any feedback on his video cards? Do you think different models would cause problems? The drivers seem to work but he only has 2.5Gb out of 4Gb available RAM as I believe the video card chomped up a portion of this. I have recommended creating a new profile for him but due to the amount of customisations he has and the amount of time and effort it will take to get him up and running again, he prefers to bear with the problem than to go down that path. However, at least once a week, his PC acts up and I can't think of any other tools or techniques to rectify his problems. I guess we are at a stage where we just want to "stabilize" things so he won't encounter issues that frequently. Any feedback is very much appreciated.

  Read the article

• Aircrack-ng Usage on Windows (XP) -- Needs clear steps

  - by Alvin

  I've found that Aircrack-ng is very powerful tool for wireless hacking. But it is a bit complicated to use (even with its documentation). Also, when I run the GUI, it needs to add a "capture file". What is that? Additionally, it says Windows version is weaker than the Linux version. So how can I get it to run like a Linux version? What are some step-by-step instructions (to use on Windows XP)?

  Read the article

• Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

  - by Ole Jak

  I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

  Read the article

• Remove noise from a recording

  - by essamSALAH

  I used to record important technical meetings and demos using Camtasia Studio, using a Mic to capture the speaker voice. Sometimes we invite attendees by asking them to call us in the meeting, and they would call on a cell phone then we switch it to loudspeaker so we can hear and talk to them and also record the conversation on Camtasia. The problem I am having now is that playing back those recording produces the regular noise that results from the microphone being close to the mobile phone (the kind of noise you hear when your mobile phone rings and it is near a speaker). Any advice on removing this noise?

  Read the article

• Font size of emacs in ubuntu

  - by Ispinfx

  I use emacs in ubuntu and I use Monaco 10 as its default font. However, the font rendering seems a bit odd compared to my gnome terminal with the same font size: It's a bit smaller and not as clear as that in the terminal. I've tried to avoid simply this with size 11 but it's too large for me. How can I make it the same as its look in the terminal ? Any help is appreciated :) UPDATE: I should tell you the above on is GUI emacs running a shell, and the below is the gnome terminal. On the right are their correspond font settings. Both 100% capture with font size 10: (left: emacs, middle: terminal, right: gedit) One more (gvim's):

  Read the article

• Computer not POSTing "randomly"?

  - by smoth190

  I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

  Read the article

• Catch-all DNS record

  - by Christian Sciberras

  Intro Our users have the ability to buy a domain (eg: user1.com) and make it point to out website, (eg: example.com), by simply pointing user1.com to ns1/ns2.example.com . Issue So far everything's good, however, example.com does not like this; we need to set up WHM/cpanel to make the server accept user1.com . Problem is, we'd rather made this automatic, possibly without having to use WHM API. The question We need some sort of "catch-all" wildcard entry so that we capture all of our user's possible domains.

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• can I display a JPG or PNG to the framebuffer (/dev/fb*)?

  - by ndmweb

  I know I can capture the framebuffer in linux using something like cp /dev/fb0 ~/myimage and re-display that by coping back to the device like so cp ~/myimage /dev/fb0. What format is the framebuffer image data in? and how would I go about displaying a pre-made image (jpg, png) to the framebuffer? Can I convert to this format using imagemagick? p.s. Im using a raspberry pi running raspbian. Update 11-12-2012 I ended up using pygame to display images in my application. Not sure if this uses the frame-buffer to display the images. But it meets my needs quite well.

  Read the article

• log execution of certain commands on linux

  - by jlsksr

  I have to maintain a system (debian) on which several users are allowed to install programs - so I would like to log, for example, if anyone executes "apt-get install" or "apt-get purge", so I can keep track of manually installed packages.. I'm looking for a general way to achieve this; it's not just APT, but several programs/scripts etc. Any ideas? /edit a google-search with few different keywords brought up this: http://serverfault.com/questions/201221/how-to-log-every-linux-command-to-a-logserver http://stackoverflow.com/questions/15698590/how-to-capture-all-the-commands-typed-in-unix-linux-by-any-user http://sourceforge.net/projects/rootsh/

  Read the article

• Kill program after it outputs a given line, from a shell script

  - by Paul

  Background: I am writing a test script for a piece of computational biology software. The software I am testing can take days or even weeks to run, so it has a recover functionality built in, in the case of system crashes or power failures. I am trying to figure out how to test the recovery system. Specifically, I can't figure out a way to "crash" the program in a controlled manner. I was thinking of somehow timing a SIGKILL instruction to run after some amount of time. This is probably not ideal, as the test case isn't guaranteed to run the same speed every time (it runs in a shared environment), so comparing the logs to desired output would be difficult. This software DOES print a line for each section of analysis it completes. Question: I was wondering if there was a good/elegant way (in a shell script) to capture output from a program and then kill the program when a given line/# of lines is output by the program?

  Read the article

• Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

  - by Eli

  Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• OpenVZ kernel panic

  - by GtoXic

  I recently installed OpenVZ on my VMWare box (To do some testing) and I get the following: https://www.dropbox.com/s/p38btkv5j84bvsh/Capture.JPG the GRUB config is as follows: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/VolGroup00/LogVol00 sysfs.deprecated=1 initrd /initrd-2.6.32-042stab057.1.img title CentOS (2.6.18-238.el5) root (hd0,0) kernel /vmlinuz-2.6.18-238.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-238.el5.img

  Read the article

• Is Protune for video only or may be used for photo too?

  - by Green

  I have Hero3+ Black Edition. I can't understand if Protune is for video only or may be applied for photos? The manual says it is both for video and for photo (page 35): High-Quality Image Capture Protune’s high data rate captures images with less compression, giving content creators higher quality for professional productions. Film/TV Rate Standard While shooting in Protune, you have the option of recording video in cinema quality 24 fps to easily intercut GoPro content with other source media without the need to perform fps conversion. But at the same time their site says that Protune is for video only: To record Protune footage, you’ll need to turn Protune ON in your camera’s settings menu. What for is Protune? Photo? Video? Or both?

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

• Using Process Monitor to track registry changes

  - by CChriss

  It seems many people like using Process Monitor to see what changes are being made to the registry during a process. So I downloaded it. I want to see what changes are made in the registry by some config changes I'm making on my computer so I can write them into a vbs script to do them easily. Can someone tell me how to drive Process Monitor to capture the info? In the Help I don't see how to do it. I'm using Windows 7 home Premium 64 bit.

  Read the article

• Record the audio stream from HDMI monitor

  - by Nick

  I am trying to record sound playing on my comupter with Audacity but am running into some troubles. I have the stereo mix set to be the default audio recorder but it doesn't pick up the audio that is being played through my HDMI monitors speakers: Playback Recording When I plug in headphones the stereo mix will pick up the audio stream and I can record but not when playing through the HDMI. I have installed the latest audio drivers and have tried all the different record options to no avail. How can I capture the Audio stream going through the HDMI?

  Read the article

• Network Monitoring Tool Recommendation

  - by user42801

  Hello, My company is looking for a monitoring app/tool that would allow us to capture and graph statistics on network performance. As a starting point, we would like to ping remote host(s) and gateway(s) from several of our servers, grab an average of the ping times from each of our servers to the remote host(s), and then graph it (preferably in a central location). Also, we would like to be able to graph the results for time frames as short as a week to as long as 6 months. It is reasonable to expect that we would ask more of the selected monitoring app/tool as we come up with other key network performance indicators in the future. So an app with great flexibility and features would be ideal. Upon first glance, Cacti looks like it might be a fit. Any other recommendations? Thanks in advance for any input.

  Read the article

• FreeBSD 9 (amd64) reboot/shutdown process is very slow

  - by nbari

  I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

  Read the article

• Extract photo stills from .vob files

  - by Eric Rath

  My parents had all the family slides scanned by a photo lab. The lab returned the digital photos on two DVDs as movies; there's some stock music over a slideshow with fades between each photo. The discs contain only a handful of files, including some very large VOB files. I'd like to extract these photos and import them into iPhoto. I saw this answer about capturing stills, and that might work if I can figure out the right offset from the beginning and the right capture rate. But this approach seems very error-prone for this purpose. Is there a better way? I wish the individual photo files were stored in a directory on the discs, but they're not there.

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >