Search Results

Search found 5507 results on 221 pages for 'mod ssl'.

Page 204/221 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Allow SFTP in iptables

    - by Kevin Orriss
    I have just purchased a VPS from linode and am going through the setup guide. I have everything running (apache2, php, mysql etc) but I am being denied access via SFTP when using fileZilla to upload a file. Now this is my second time installing the server as I missed a section out the first time. I was able to connect to my server through SFTP on filezilla the first time and the thing I missed out was adding a new user and editing the iptables in the firewall. So it would seem that the guide I have been following has blocked SFTP but allowed SSH. Here is the iptables file: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP and HTTPS connections from anywhere (the normal ports for websites and SSL). -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allow SSH connections # # The -dport number should be the same port number you set in sshd_config # -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT All I would like is a line I need to put in there which allows SFTP over port 22. Thank you for reading this.

    Read the article

  • zsh : How to list directory content with tab?

    - by Philippe CM
    I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

    Read the article

  • Optimize Apache performance

    - by Phliplip
    I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

    Read the article

  • How to protect folder privacy against unethical network administrators? [closed]

    - by Trevor Trovalds
    I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

    Read the article

  • How to make lighttpd respect X-Forwarded-Proto when constructing redirects for directories?

    - by Tim Landscheidt
    We have an nginx proxy at tools.wmflabs.org that receives requests by http and https and passes them by http on to lighttpds on a grid (one lighttpd per top-level path). Requests that reach the proxy by https are received by the lighttpds like this: HEAD /lighttpd-test/test HTTP/1.1 Connection: close Host: tools.wmflabs.org X-Forwarded-Proto: https X-Original-URI: /lighttpd-test/test User-Agent: curl/7.29.0 Accept: */* This works great except in the case where the URL references a physical directory and misses the trailing slash ("/"), as lighttpd then generates a redirect to the http URL: HTTP/1.1 301 Moved Permanently Location: http://tools.wmflabs.org/lighttpd-test/test/ Connection: close Date: Fri, 06 Jun 2014 14:50:29 GMT Server: lighttpd/1.4.28 The relevant parts of our lighttpd configurations are: server.modules = ( "mod_setenv", "mod_access", "mod_accesslog", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", "mod_cgi", ) server.port = $port [...] server.document-root = "$home/public_html" [...] server.follow-symlink = "enable" [...] server.stat-cache-engine = "fam" ssl.engine = "disable" alias.url = ( "/$tool" => "$home/public_html/" ) index-file.names = ( "index.php", "index.html", "index.htm" ) dir-listing.encoding = "utf-8" server.dir-listing = "disable" url.access-deny = ( "~", ".inc" ) [...] How can I make lighttpd respect X-Forwarded-Proto and use it when constructing redirects for directories? I'm aware that I could try to tackle this in nginx, but I'd prefer if I can fix it in lighttpd.

    Read the article

  • Why is /dev/urandom only readable by root since Ubuntu 12.04 and how can I "fix" it?

    - by Joe Hopfgartner
    I used to work with Ubuntu 10.04 templates on a lot of servers. Since changing to 12.04 I have problems that I've now isolated. The /dev/urandom device is only accessible to root. This caused SSL engines, at least in PHP, for example file_get_contents(https://... to fail. It also broke redmine. After a chmod 644 it works fine, but that doesnt stay upon reboot. So my question. why is this? I see no security risk because... i mean.. wanna steal some random data? How can I "fix" it? The servers are isolated and used by only one application, thats why I use openvz. I think about something like a runlevel script or so... but how do I do it efficiently? Maby with dpkg or apt? The same goes vor /dev/shm. in this case i totally understand why its not accessible, but I assume I can "fix" it the same way to fix /dev/urandom

    Read the article

  • What character can be safely used for naming files on unix/linux?

    - by Eric DANNIELOU
    Before yesterday, I used only lower case letters, numbers, dot (.) and underscore(_) for directories and file naming. Today I would like to start using more special characters. Which ones are safe (by safe I mean I will never have any problem)? ps : I can't believe this question hasn't been asked already on this site, but I've searched for the word "naming" and read canonical questions without success (mosts are about computer names). Edit #1 : (btw, I don't use upper case letters for file names. I don't remember why. But since a few month, I have production problems with upper case letters : Some OS do not support ascii!) Here's what happened yesterday at work : As usual, I had to create a self signed SSL certificate. As usual, I used the name of the website for the files : www2.example.com.key www2.example.com.crt www2.example.com.csr. Then comes the problem : Generate a wildcard self signed certificate. I did that and named the files example.com.key example.com.crt example.com.csr, which is misleading (it's a certificate for *.example.com). I came back home, started putting some stars in apache configuration files filenames and see if it works (on a useless home computer, not even stagging). Stars in file names really scares me : Some coworkers/vendors/... can do some script using rm find xarg that would lead to http://www.ucs.cam.ac.uk/support/unix-support/misc/horror, and already one answer talks about disaster. Edit #2 : Just figured that : does not need to be escaped. Anyone knows why it is not used in file names?

    Read the article

  • NginxHttpAuthBasicModule with Sinatra & Passenger

    - by scainey
    Hi, I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

    Read the article

  • NginxHttpAuthBasicModule with Sinatra & Passenger

    - by scainey
    I'm serving static pages from a Sinatra application using Nginx. I've implemented Basic Authentication for one page on the site using NginxHttpAuthBasicModule, the authentication succeeds but Nginx doesn't resolve the link. Error log gives - 2010/03/22 12:15:19 [error] 7143#0: *2902 open() "/home/me/live/mysite_home/public /mypage" failed (2: No such file or directory), client: 82.71.18.122, server: mysite.com, request: "GET /mypage HTTP/1.1", host: "mysite.com" The actual file is found at: /home/me/live/mysite_home/live/mypage.erb The configuration file is: server { listen 80; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } server { listen 443; server_name mysite.com; root /home/me/live/mysite_home/public; passenger_enabled on; ssl on; ssl_certificate /etc/nginx/conf/certs/server.crt; ssl_certificate_key /etc/nginx/conf/certs/server.key; keepalive_timeout 70; location /mypage { auth_basic "Restricted"; auth_basic_user_file htpasswd; } } Not sure if this is a Sinatra, Passenger or Nginx thing, or if I'm just missing something.

    Read the article

  • Finding edge and corner values of an image in matlab

    - by James
    Hi, this problem links to two other questions i've asked on here. I am tracing the outline of an image and plotting this to a dxf file. I would like to use the bwboundaries function to find the coordinates of the edges of the image, find the corner coordinates using the cornermetric function and then remove any edge coordinates that are not a corner. The important thing I need to be able to do is keep the order of the corner elements obtained from bwboundaries, so that the section traces properly. The dxf function I have that draws from the coordinates draws lines between coordinates that are next to each other, so the line has to be drawn "around" the section rather than straight between the corner points. The reason I am doing this is because there are less coordinates obtained this way, so it is easier to amend the dxf file (as there are less points to manipulate). The code I have so far is: %# Shape to be traced bw = zeros(200); bw(20:40,20:180) = 1; bw(20:180,90:110) = 1; bw(140:180,20:185) = 1; %# Boundary Finding Section [Boundary] = bwboundaries(bw); %Traces the boundary of each section figure, imshow(bw); hold on; colors=['b' 'g' 'r' 'c' 'm' 'y']; for k=1:length(Boundary) perim = Boundary{k}; %Obtains perimeter coordinates (as a 2D matrix) from the cell array cidx = mod(k,length(colors))+1;% Obtains colours for the plot plot(perim(:,2), perim(:,1),... colors(cidx),'LineWidth',2); end Coordmat = cell2mat(Boundary) %Converts the traced regions to a matrix X = Coordmat(:,1) Y = Coordmat(:,2) % This gives the edge coordinates in matrix form %% Corner Finding Section (from Jonas' answer to a previous question %# get corners cornerProbability = cornermetric(bw); cornerIdx = find(cornerProbability==max(cornerProbability(:))); %# Label the image. bwlabel puts 1 for the first feature, 2 for the second, etc. %# Since concave corners are placed just outside the feature, grow the features %# a little before labeling bw2 = imdilate(bw,ones(3)); labeledImage = bwlabel(bw2); %# read the feature number associated with the corner cornerLabels = labeledImage(cornerIdx); %# find all corners that are associated with feature 1 corners_1 = cornerIdx(cornerLabels==1) [Xcorners, Ycorners] = ind2sub(200,corners_1) % Convert subscripts The code I have is, to give a matrix Xfin for the final x coordinates (which are on the edge AND at a corner. Xfin = zeros(length(X),1) for i = Xcorners XFin(i) = Xcorners if i~= Xcorners XFin(i) = [] end end However, this does not work correctly, because the values in the solution are sorted into order, and only one of each value remains. As I said, I would like the corner elements to be in the same order as obtained from bwboundaries, to allow the image to trace properly. Thanks

    Read the article

  • Processing an Integer Buried in a String in XSL

    - by justkt
    I have a stored time value which is of the format H:mm:ss. The hours may be any value from 0 up through several days. This data is sent in an XML tag and processed by XSL to be displayed. The display that I want is of the format: D days, HH:mm:ss (hours/minutes) Where the last tag shows hours if HH is greater than 0, minutes if it is 0. Given the original HH, which may be more than 24, I know I need the floor of HH / 24 to get the days value. Then the original HH % 24 gives me the leftover hours. I have also handled the minutes and hours question using xsl:when and xsl:if. It's getting days and hours from the hours value that has me stumped. EDIT So far, I'm looking at doing the following: Variable declaration <xsl:variable name="time"><xsl:value-of select="time" /><xsl:variable> <xsl:variable name="days"><xsl:value-of select="floor(substring-before(time, ':') / 24)" /></xsl:variable> <xsl:variable name="hours"><xsl:value-of select="substring-before(time, ':') mod 24" /></xsl:variable> <xsl:variable name="minutes"><xsl:value-of select="substring-after(time, ':')" /></xsl:variable> Use <xsl:if test="$days > 0"> <xsl:value-of select="$days" /> days </xsl:if> <xsl:value-of select="$hours" />:<xsl:value-of select="$minutes" /> <xsl:choose> <xsl:when test="$hours > 0"> hour<xsl:if test="$hours > 1">s</xsl:if> </xsl:when> <xsl:otherwise> minute<xsl:if test="$minute != '01:00'">s</xsl:if> </xsl:otherwise> </xsl:choose> And for clarification, a sample time would be <time>26:15:00</time> for 1 day 2:15 hours.

    Read the article

  • using php's libcurl to register user and upload file to server

    - by tunpishuang
    here is a site http://www.lyrkjsw.gov.cn that can let the registered user to upload file (e.g. images or office files) to the site. i want to register user and upload image to this site using libcurl binding with php. only registered user can upload image. so i use cookiejar stored in c:\cookie.txt after register and use c:\cookie.txt in uploadImg() function . register user is valid but failed to upload image , can anybody know is there any mistake of my code: <? /* options */ //the list url $expUrl='http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php'; //the user info to be registered $regUser='jiong'; $regPass='jiong'; $regMail='[email protected]'; $regUrl=str_replace('list_resource.php','register.php',$expUrl); // options for image upload $fileDir='@D:\img\b.jpg'; $fileTitle='aaaaaaaaaaaaa'; $fileDesc='aaaaaaaaaaaaadesc'; $uploadImgUrl=str_replace('list_resource.php','add_resource.php',$expUrl); /* register function */ function reg($regurl,$u,$p,$m) { $ch = curl_init(); $options=array( CURLOPT_URL=>$regurl, CURLOPT_RETURNTRANSFER=>true, CURLOPT_POST=>true, CURLOPT_POSTFIELDS=>'mod=register_now&next_url=index.php&addon_app=&referrer_id=&login_name='.$u.'&login_pass='.$p.'&confirm_login_pass='.$p.'&login_email='.$m.'&nickname=&gender=0&qq=&mobile=&telephone=&true_name=&website_name=&website_url=&my_question=&my_answer=', CURLOPT_COOKIESESSION=>true, CURLOPT_HEADER=>true, CURLOPT_COOKIEJAR=>'c:\cookie.txt' ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("register ok :)\n"); curl_close($ch); return true; }else{ printf("register failed:(\n"); curl_close($ch); return false; } } /* image uploading function */ function uploadImg($uploadimgurl,$filedir,$filetitle,$filedesc) { $ch = curl_init(); $options=array( CURLOPT_COOKIEFILE=>'c:\cookie.txt', CURLOPT_URL=>$uploadimgurl, CURLOPT_RETURNTRANSFER=>1, CURLOPT_POST=>1, CURLOPT_POSTFIELDS=>" 'MAX_FILE_SIZE'='33554432'& 'preview_area_id'='upload_file'& 'editor_area_id'='body'& 'js_function'=''& 'resource_id'=''& 'show_top_part'='no'& 'file_1'=$filedir& 'file_title_1'=$filetitle& 'file_desc_1'=$filedesc " ); curl_setopt_array($ch,$options); $data = curl_exec($ch); if(strpos($data,'??')){ printf("upload ok :)\n"); }else{ printf("upload failed :(\n"); } curl_close($ch); } if(reg($regUrl,$regUser,$regPass,$regMail) != false) { uploadImg($uploadImgUrl,$fileDir,$fileTitle,$fileDesc); } http://www.lyrkjsw.gov.cn/hbcms/user/list_resource.php (list file page) http://www.lyrkjsw.gov.cn/hbcms/user/register.php (register page) http://www.lyrkjsw.gov.cn/hbcms/user/add_resource.php (image uploading page)

    Read the article

  • Linux Device Driver: Symbol "memcpy" not found

    - by Hinton
    Hello, I'm trying to write a Linux device driver. I've got it to work really well, until I tried to use "memcpy". I don't even get a compiler error, when I "make" it just warns me: WARNING: "memcpy" [/root/homedir/sv/main.ko] undefined! OK and when I try to load via insmod, I get on the console: insmod: error inserting './main.ko': -1 Unknown symbol in module and on dmesg: main: Unknown symbol memcpy (err 0) I include the following: #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/kernel.h> /* printk() */ #include <linux/slab.h> /* kmalloc() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ #include <linux/types.h> /* size_t */ #include <linux/fcntl.h> /* O_ACCMODE */ #include <linux/cdev.h> #include <asm/system.h> /* cli(), *_flags */ #include <asm/uaccess.h> /* copy_*_user */ The function using memcpy: static int dc_copy_to_user(char __user *buf, size_t count, loff_t *f_pos, struct sv_data_dev *dev) { char data[MAX_KEYLEN]; size_t i = 0; /* Copy the bulk as long as there are 10 more bytes to copy */ while (i < (count + MAX_KEYLEN)) { memcpy(data, &dev->data[*f_pos + i], MAX_KEYLEN); ec_block(dev->key, data, MAX_KEYLEN); if (copy_to_user(&buf[i], data, MAX_KEYLEN)) { return -EFAULT; } i += MAX_KEYLEN; } return 0; } Could someone help me? I thought the thing was in linux/string.h, but I get the error just the same. I'm using kernel 2.6.37-rc1 (I'm doing in in user-mode-linux, which works only since 2.6.37-rc1). Any help is greatly appreciated. # Context dependent makefile that can be called directly and will invoke itself # through the kernel module building system. KERNELDIR=/usr/src/linux ifneq ($(KERNELRELEASE),) EXTRA_CFLAGS+=-I $(PWD) -ARCH=um obj-m := main.o else KERNELDIR ?= /lib/modules/$(shell uname -r)/build PWD = $(shell pwd) all: $(MAKE) V=1 ARCH=um -C $(KERNELDIR) M=$(PWD) modules clean: rm -rf Module.symvers .*.cmd *.ko .*.o *.o *.mod.c .tmp_versions *.order endif

    Read the article

  • Becoming a professional programmer / software engineer

    - by Matt
    This isn't strictly about programming, more about being a programmer, so I'm sorry if its not the right kind of question to ask on this forum (mod, please delete if it isn't) I'm a computer tech in the US Army, and once I'm out I'll have eight years on the job. I'm about to start a degree through an online school (the only way I can get the army to pay for it while I'm still in), and I'm seriously looking at getting a computer science degree. I'm great with computers. I can take one apart and put it back together with my eyes closed. I'm A+ and Network+ certified and I'm getting a couple other CompTIA certs before I get out. I can work Windows as well as anyone on this planet and I'm not terrible with Linux. A job in computers is something I've always wanted. But, aside from being a computer technician, it seems that every job in the field requires programming ability. I like programming as a hobby. I programmed TI BASIC in high school and I'm teaching myself Python, but that's as far as my experience goes. That sort of brings me to my questions: I've always heard that the first language is the most difficult, and once you learn it well then all the others sort of fall into place for you. Is that true? Like, if I spend the next eight months mastering Python, will I pretty much be able to pick up at least fair proficiency in any other OO language within a month of studying it or whatever? How easy is it to burn out? the biggest thing I'm afraid of is just burning out on programming. I can go all day long if I'm programming strictly for my own personal desire, but I can imagine it being really easy to burn out after a few years of programming to deadlines and certain specifications. Especially if its a big project involving a dozen different designers. From what I told you about myself, would I already be qualified to work as a regular technician (geek squad type or maybe running a computer repair shop). Is Python a good base to learn from? I've heard that it makes you hate other languages because they feel more convoluted when learning, but also that its a great beginner language. If you're a professional programmer, did you have any of the same fears? Would you recommend that I stick to computer repair and Python rather than try to get into corporate programming? (just from what you've read in this thread, anyway) Thanks for taking the time to read all this and answer (if you did)

    Read the article

  • Would someone mind giving suggestions for this new assembly language?

    - by Noctis Skytower
    Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo save Store load Retrieve L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

    Read the article

  • Wrong sessionID being used in callback, but only on one particular computer

    - by user210119
    I am writing a Python/Django web application that uses OAuth (for the TwitterAPI, not that it should matter). I am storing a session ID in my login function, and then after using OAuth to get the user's token, I try to retrieve the sessionID in my callback function. The callback function then always fails(throws an exception) because it can't find the OAuth token in the session. Through the debugger, I am able to determine that the session ID that the server is using is incorrect - it does not match the session ID that was stored in the login function. It's therefore unsurprising that the Oauth tokens were not there. The session that appears in the callback was the same one each time (until I tried deleting it - see "things I've tried below"), and it started out as an old session, with some data in it that is from a different django app running on the same server that I hadn't touched in a couple weeks. Here's the kicker: everything I described is an issue only on our production server, and only when connecting to it from my computer. Let me clarify: this only happens with my particular laptop. I can connect to the app just fine from someone else's computer. Other people cannot connect with their accounts on my computer. Furthmore, I can connect just fine to the app when it is running on my localhost using the built-in django webserver, just not to the production server. My setup: my server and local box are running= Django 1.2.0 and Python 2.6.5. My local box is running Snow Leopard and the Django webserver, the server is running Ubuntu, Apache2, and mod-wsgi. For sessions, I am using Django's default session backend (DB). Things I have tried, all to no avail: logging in with a different account, including new accounts that have never OAuthed to this app before Clearing cookies, using incognito mode, using a different web browser on my same computer. Each time, upon inspecting my cookies, the sessionID matched the sessionID in the login function and was different from the sessionID in the callback. deleting the session in the database that appears in the callback function, (the one that appeared to be old data). The callback function still fails, and the sessionID it appears to be using is now a new one using a different session backend (DB-cache, flat file, etc...) restarting the server, my computer, etc. My first question on StackOverflow, so bear with me if I didn't quite follow local conventions. I am just at a loss as to what to even look for - what are the things that could possibly be causing sessions to not work on my particular computer, and (so far!) only my particular computer?

    Read the article

  • Issue accessing remote Infinispan mbeans

    - by user1960172
    I am able to access the Mbeans by local Jconsole but not able to access the MBEANS from a remote Host. My COnfiguration: <?xml version='1.0' encoding='UTF-8'?> <server xmlns="urn:jboss:domain:1.4"> <extensions> <extension module="org.infinispan.server.endpoint"/> <extension module="org.jboss.as.clustering.infinispan"/> <extension module="org.jboss.as.clustering.jgroups"/> <extension module="org.jboss.as.connector"/> <extension module="org.jboss.as.jdr"/> <extension module="org.jboss.as.jmx"/> <extension module="org.jboss.as.logging"/> <extension module="org.jboss.as.modcluster"/> <extension module="org.jboss.as.naming"/> <extension module="org.jboss.as.remoting"/> <extension module="org.jboss.as.security"/> <extension module="org.jboss.as.threads"/> <extension module="org.jboss.as.transactions"/> <extension module="org.jboss.as.web"/> </extensions> <management> <security-realms> <security-realm name="ManagementRealm"> <authentication> <local default-user="$local"/> <properties path="mgmt-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> <security-realm name="ApplicationRealm"> <authentication> <local default-user="$local" allowed-users="*"/> <properties path="application-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> </security-realms> <management-interfaces> <native-interface security-realm="ManagementRealm"> <socket-binding native="management-native"/> </native-interface> <http-interface security-realm="ManagementRealm"> <socket-binding http="management-http"/> </http-interface> </management-interfaces> </management> <profile> <subsystem xmlns="urn:jboss:domain:logging:1.2"> <console-handler name="CONSOLE"> <level name="INFO"/> <formatter> <pattern-formatter pattern="%K{level}%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> </console-handler> <periodic-rotating-file-handler name="FILE" autoflush="true"> <formatter> <pattern-formatter pattern="%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> <file relative-to="jboss.server.log.dir" path="server.log"/> <suffix value=".yyyy-MM-dd"/> <append value="true"/> </periodic-rotating-file-handler> <logger category="com.arjuna"> <level name="WARN"/> </logger> <logger category="org.apache.tomcat.util.modeler"> <level name="WARN"/> </logger> <logger category="org.jboss.as.config"> <level name="DEBUG"/> </logger> <logger category="sun.rmi"> <level name="WARN"/> </logger> <logger category="jacorb"> <level name="WARN"/> </logger> <logger category="jacorb.config"> <level name="ERROR"/> </logger> <root-logger> <level name="INFO"/> <handlers> <handler name="CONSOLE"/> <handler name="FILE"/> </handlers> </root-logger> </subsystem> <subsystem xmlns="urn:infinispan:server:endpoint:6.0"> <hotrod-connector socket-binding="hotrod" cache-container="clustered"> <topology-state-transfer lazy-retrieval="false" lock-timeout="1000" replication-timeout="5000"/> </hotrod-connector> <memcached-connector socket-binding="memcached" cache-container="clustered"/> <!--<rest-connector virtual-server="default-host" cache-container="clustered" security-domain="other" auth-method="BASIC"/> --> <rest-connector virtual-server="default-host" cache-container="clustered" /> <websocket-connector socket-binding="websocket" cache-container="clustered"/> </subsystem> <subsystem xmlns="urn:jboss:domain:datasources:1.1"> <datasources/> </subsystem> <subsystem xmlns="urn:infinispan:server:core:5.3" default-cache-container="clustered"> <cache-container name="clustered" default-cache="default"> <transport executor="infinispan-transport" lock-timeout="60000"/> <distributed-cache name="default" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="memcachedCache" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="namedCache" mode="SYNC" start="EAGER"/> </cache-container> <cache-container name="security"/> </subsystem> <subsystem xmlns="urn:jboss:domain:jca:1.1"> <archive-validation enabled="true" fail-on-error="true" fail-on-warn="false"/> <bean-validation enabled="true"/> <default-workmanager> <short-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </short-running-threads> <long-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </long-running-threads> </default-workmanager> <cached-connection-manager/> </subsystem> <subsystem xmlns="urn:jboss:domain:jdr:1.0"/> <subsystem xmlns="urn:jboss:domain:jgroups:1.2" default-stack="${jboss.default.jgroups.stack:udp}"> <stack name="udp"> <transport type="UDP" socket-binding="jgroups-udp"/> <protocol type="PING"/> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-udp-fd"/> <protocol type="FD_ALL"/> <protocol type="pbcast.NAKACK"/> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> <stack name="tcp"> <transport type="TCP" socket-binding="jgroups-tcp"/> <!--<protocol type="MPING" socket-binding="jgroups-mping"/>--> <protocol type="TCPPING"> <property name="initial_hosts">10.32.50.53[7600],10.32.50.64[7600]</property> </protocol> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-tcp-fd"/> <protocol type="FD"/> <protocol type="VERIFY_SUSPECT"/> <protocol type="pbcast.NAKACK"> <property name="use_mcast_xmit">false</property> </protocol> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> </subsystem> <subsystem xmlns="urn:jboss:domain:jmx:1.1"> <show-model value="true"/> <remoting-connector use-management-endpoint="false"/> </subsystem> <subsystem xmlns="urn:jboss:domain:modcluster:1.1"> <mod-cluster-config advertise-socket="modcluster" connector="ajp" excluded-contexts="console"> <dynamic-load-provider> <load-metric type="busyness"/> </dynamic-load-provider> </mod-cluster-config> </subsystem> <subsystem xmlns="urn:jboss:domain:naming:1.2"/> <subsystem xmlns="urn:jboss:domain:remoting:1.1"> <connector name="remoting-connector" socket-binding="remoting" security-realm="ApplicationRealm"/> </subsystem> <subsystem xmlns="urn:jboss:domain:security:1.2"> <security-domains> <security-domain name="other" cache-type="infinispan"> <authentication> <login-module code="Remoting" flag="optional"> <module-option name="password-stacking" value="useFirstPass"/> </login-module> <login-module code="RealmUsersRoles" flag="required"> <module-option name="usersProperties" value="${jboss.server.config.dir}/application-users.properties"/> <module-option name="rolesProperties" value="${jboss.server.config.dir}/application-roles.properties"/> <module-option name="realm" value="ApplicationRealm"/> <module-option name="password-stacking" value="useFirstPass"/> </login-module> </authentication> </security-domain> <security-domain name="jboss-web-policy" cache-type="infinispan"> <authorization> <policy-module code="Delegating" flag="required"/> </authorization> </security-domain> </security-domains> </subsystem> <subsystem xmlns="urn:jboss:domain:threads:1.1"> <thread-factory name="infinispan-factory" group-name="infinispan" priority="5"/> <unbounded-queue-thread-pool name="infinispan-transport"> <max-threads count="25"/> <keepalive-time time="0" unit="milliseconds"/> <thread-factory name="infinispan-factory"/> </unbounded-queue-thread-pool> </subsystem> <subsystem xmlns="urn:jboss:domain:transactions:1.2"> <core-environment> <process-id> <uuid/> </process-id> </core-environment> <recovery-environment socket-binding="txn-recovery-environment" status-socket-binding="txn-status-manager"/> <coordinator-environment default-timeout="300"/> </subsystem> <subsystem xmlns="urn:jboss:domain:web:1.1" default-virtual-server="default-host" native="false"> <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/> <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/> <virtual-server name="default-host" enable-welcome-root="false"> <alias name="localhost"/> <alias name="example.com"/> </virtual-server> </subsystem> </profile> <interfaces> <interface name="management"> <inet-address value="${jboss.bind.address.management:10.32.222.111}"/> </interface> <interface name="public"> <inet-address value="${jboss.bind.address:10.32.222.111}"/> </interface> </interfaces> <socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}"> <socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/> <socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/> <socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/> <socket-binding name="ajp" port="8089"/> <socket-binding name="hotrod" port="11222"/> <socket-binding name="http" port="8080"/> <socket-binding name="https" port="8443"/> <socket-binding name="jgroups-mping" port="0" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45700"/> <socket-binding name="jgroups-tcp" port="7600"/> <socket-binding name="jgroups-tcp-fd" port="57600"/> <socket-binding name="jgroups-udp" port="55200" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45688"/> <socket-binding name="jgroups-udp-fd" port="54200"/> <socket-binding name="memcached" port="11211"/> <socket-binding name="modcluster" port="0" multicast-address="224.0.1.115" multicast-port="23364"/> <socket-binding name="remoting" port="4447"/> <socket-binding name="txn-recovery-environment" port="4712"/> <socket-binding name="txn-status-manager" port="4713"/> <socket-binding name="websocket" port="8181"/> </socket-binding-group> </server> Remote Process: service:jmx:remoting-jmx://10.32.222.111:4447 I added user to both management and application realm admin=2a0923285184943425d1f53ddd58ec7a test=2b1be81e1da41d4ea647bd82fc8c2bc9 But when i try to connect its says's: Connection failed: Retry When i use Remote process as:10.32.222.111:4447 on the sever it prompts a warning : 16:29:48,084 ERROR [org.jboss.remoting.remote.connection] (Remoting "djd7w4r1" read-1) JBREM000200: Remote connection failed: java.io.IOException: Received an invali d message length of -2140864253 Also disabled Remote authentication: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.port=12345 Still not able to connect. Any help will be highly appreciated . Thanks

    Read the article

  • RNDC fails: permission denied

    - by pawz
    Named works great. It creates a pid in /var/run/named/named.pid as expected. It is listening on port 953 as shown by the log: Apr 20 14:42:38 guchuko named[9115]: command channel listening on 127.0.0.1#953 But whenever I try to run "rndc reload" I get: rndc: 'reload' failed: permission denied What file is it being denied permission to ? It doesn't log anything so I don't know why it's not working. I've compiled bind 9.4-ESV-R1 from source and I've patched it with the mysql mod. my named.conf: options { directory "/var/bind"; forwarders { 203.82.213.101; 203.188.144.1; }; listen-on-v6 { none; }; listen-on { 127.0.0.1; 192.168.0.6; }; pid-file "/var/run/named/named.pid"; }; logging { channel simple_log { file "/var/log/named.log" versions 3 size 5m; severity debug 5; print-time yes; print-severity yes; print-category yes; }; category default { simple_log; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "pri/localhost.zone"; allow-update { none; }; notify no; }; include "/etc/rndc.key" my rndc.conf options { default-server 127.0.0.1; default-key "rndc-key"; }; server 127.0.0.1 { key "rndc-key"; }; include "/etc/rndc.key"; my rndc.key: key "rndc-key" { algorithm hmac-md5; secret "XFc8C+yCLK0mIheTSBj41g=="; };

    Read the article

  • How to setup Lucene/Solr for a B2B web app?

    - by Bill Paetzke
    Given: 1 database per client (business customer) 5000 clients Clients have between 2 to 2000 users (avg is ~100 users/client) 100k to 10 million records per database Users need to search those records often (it's the best way to navigate their data) Possibly relevant info: Several new clients each week (any time during business hours) Multiple web servers and database servers (users can login via any web server) Let's stay agnostic of language or sql brand, since Lucene (and Solr) have a breadth of support For Example: Joel Spolsky said in Podcast #11 that his hosted web app product, FogBugz On-Demand, uses Lucene. He has thousands of on-demand clients. And each client gets their own database. They use an index per client and store it in the client's database. I'm not sure on the details. And I'm not sure if this is a serious mod to Lucene. The Question: How would you setup Lucene search so that each client can only search within its database? How would you setup the index(es)? Where do you store the index(es)? Would you need to add a filter to all search queries? If a client cancelled, how would you delete their (part of the) index? (this may be trivial--not sure yet) Possible Solutions: Make an index for each client (database) Pro: Search is faster (than one-index-for-all method). Indices are relative to the size of the client's data. Con: I'm not sure what this entails, nor do I know if this is beyond Lucene's scope. Have a single, gigantic index with a database_name field. Always include database_name as a filter. Pro: Not sure. Maybe good for tech support or billing dept to search all databases for info. Con: Search is slower (than index-per-client method). Flawed security if query filter removed. One last thing: I would also accept an answer that uses Solr (the extension of Lucene). Perhaps it's better suited for this problem. Not sure.

    Read the article

  • 'Scanner' does not name a type error in g++

    - by Max
    Hi. I'm trying to compile code in g++ and I get the following errors: In file included from scanner.hpp:8, from scanner.cpp:5: parser.hpp:14: error: ‘Scanner’ does not name a type parser.hpp:15: error: ‘Token’ does not name a type Here's my g++ command: g++ parser.cpp scanner.cpp -Wall Here's parser.hpp: #ifndef PARSER_HPP #define PARSER_HPP #include <string> #include <map> #include "scanner.hpp" using std::string; class Parser { // Member Variables private: Scanner lex; // Lexical analyzer Token look; // tracks the current lookahead token // Member Functions <some function declarations> }; #endif and here's scanner.hpp: #ifndef SCANNER_HPP #define SCANNER_HPP #include <iostream> #include <cctype> #include <string> #include <map> #include "parser.hpp" using std::string; using std::map; enum { // reserved words BOOL, ELSE, IF, TRUE, WHILE, DO, FALSE, INT, VOID, // punctuation and operators LPAREN, RPAREN, LBRACK, RBRACK, LBRACE, RBRACE, SEMI, COMMA, PLUS, MINUS, TIMES, DIV, MOD, AND, OR, NOT, IS, ADDR, EQ, NE, LT, GT, LE, GE, // symbolic constants NUM, ID, ENDFILE, ERROR }; class Token { public: int tag; int value; string lexeme; Token() {tag = 0;} Token(int t) {tag = t;} }; class Num : public Token { public: Num(int v) {tag = NUM; value = v;} }; class Word : public Token { public: Word() {tag = 0; lexeme = "default";} Word(int t, string l) {tag = t; lexeme = l;} }; class Scanner { private: int line; // which line the compiler is currently on int depth; // how deep in the parse tree the compiler is map<string,Word> words; // list of reserved words and used identifiers // Member Functions public: Scanner(); Token scan(); string printTag(int); friend class Parser; }; #endif anyone see the problem? I feel like I'm missing something incredibly obvious.

    Read the article

  • Unable to use getInt() but able to use getString() for a sqlite database

    - by mwrazam
    I am using a cursor to access a sqlite database I have in my app. I am having trouble using the .getInt() on my database. My database is pre-created, and I have a few cursors that perform queries to interface with the information. Several of the columns in one of the tables are set as INTEGER type. I realize that sqlite has no built in check to make sure columns are indeed INT. However, when retrieving the data, I can use the .getString() function without any issues, but calling .getInt() causes the app to crash. Below is the relevant code. If I am missing anything, please let me know, and I'll add it in. Any help is greatly appreciated. Thank you very much. Cursor: public Cursor getSkitStats(int module, int skit) { Cursor mCursor = myDataBase.rawQuery("SELECT * FROM score WHERE mod="+module+" AND skit="+skit+"", null); if (mCursor != null) { mCursor.moveToFirst(); } return mCursor; } and I am using a simple Toast call to output the result of the query: Toast.makeText(getApplicationContext(), scoreContent.getInt(0), Toast.LENGTH_SHORT).show(); The variable scoreContent is the cursor. And here is the crash output: 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1659) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1675) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.access$1500(ActivityThread.java:121) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:943) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.os.Handler.dispatchMessage(Handler.java:99) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.os.Looper.loop(Looper.java:130) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.main(ActivityThread.java:3701) 07-08 23:53:31.726: E/AndroidRuntime(15685): at java.lang.reflect.Method.invokeNative(Native Method) 07-08 23:53:31.726: E/AndroidRuntime(15685): at java.lang.reflect.Method.invoke(Method.java:507) 07-08 23:53:31.726: E/AndroidRuntime(15685): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:866) 07-08 23:53:31.726: E/AndroidRuntime(15685): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:624) 07-08 23:53:31.726: E/AndroidRuntime(15685): at dalvik.system.NativeStart.main(Native Method) 07-08 23:53:31.726: E/AndroidRuntime(15685): Caused by: android.content.res.Resources$NotFoundException: String resource ID #0x2 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.content.res.Resources.getText(Resources.java:205) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.widget.Toast.makeText(Toast.java:258) 07-08 23:53:31.726: E/AndroidRuntime(15685): at jp.atomicideas.ne.Summary.onCreate(Summary.java:90) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 07-08 23:53:31.726: E/AndroidRuntime(15685): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1623) 07-08 23:53:31.726: E/AndroidRuntime(15685): ... 11 more

    Read the article

  • [C] Programming problem: Storing values of an array in one variable

    - by OldMacDonald
    Hello, I am trying to use md5 code to calculate checksums of file. Now the given function prints out the (previously calculated) checksum on screen, but I want to store it in a variable, to be able to compare it later on. I guess the main problem is that I want to store the content of an array in one variable. How can I manage that? Probably this is a very stupid question, but maybe somone can help. Below is the function to print out the value. I want to modify it to store the result in one variable. static void MDPrint (mdContext) MD5_CTX *mdContext; { int i; for (i = 0; i < 16; i++) { printf ("%02x", mdContext->digest[i]); } // end of for } // end of function For reasons of completeness the used struct: /* typedef a 32 bit type */ typedef unsigned long int UINT4; /* Data structure for MD5 (Message Digest) computation */ typedef struct { UINT4 i[2]; /* number of _bits_ handled mod 2^64 */ UINT4 buf[4]; /* scratch buffer */ unsigned char in[64]; /* input buffer */ unsigned char digest[16]; /* actual digest after MD5Final call */ } MD5_CTX; and the used function to calculate the checksum: static int MDFile (filename) char *filename; { FILE *inFile = fopen (filename, "rb"); MD5_CTX mdContext; int bytes; unsigned char data[1024]; if (inFile == NULL) { printf ("%s can't be opened.\n", filename); return -1; } // end of if MD5Init (&mdContext); while ((bytes = fread (data, 1, 1024, inFile)) != 0) MD5Update (&mdContext, data, bytes); MD5Final (&mdContext); MDPrint (&mdContext); printf (" %s\n", filename); fclose (inFile); return 0; }

    Read the article

  • Add Your Gmail Account to Outlook 2010 Using IMAP

    - by Mysticgeek
    If you’re upgrading from Outlook 2003 to 2010, you might want to use IMAP with your Gmail account to synchronize mail across multiple machines. Using our guide, you will be able to start using it in no time. Enable IMAP in Gmail First log into your Gmail account and open the Settings panel. Click on the Forwarding and POP/IMAP tab and verify IMAP is enabled and save changes. Next open Outlook 2010, click on the File tab to access the Backstage view. Click on Account Settings and Add and remove accounts or change existing connection settings. In the Account Settings window click on the New button. Enter in your name, email address, and password twice then click Next. Outlook will configure the email server settings, the amount of time it takes will vary. Provided everything goes correctly, the configuration will be successful and you can begin using your account. Manually Configure IMAP Settings If the above instructions don’t work, then we’ll need to manually configure the settings. Again, go into Auto Account Setup and select Manually configure server settings or additional server types and click Next.   Select Internet E-mail – Connect to POP or IMAP server to send and receive e-mail messages. Now we need to manually enter in our settings similar to the following. Under the Server Information section verify the following. Account Type: IMAP Incoming mail server: imap.gmail.com Outgoing mail server (SMTP): smtp.gmail.com Note: If you have a Google Apps account make sure to put the full email address ([email protected]) in the Your Name and User Name fields. Note: If you live outside of the US you might need to use imap.googlemail.com and smtp.googlemail.com Next, we need to click on the More Settings button… In the Internet E-mail Settings screen that pops up, click on the Outgoing Server tab, and check the box next to My outgoing server (SMTP) requires authentication. Also select the radio button next to Use same settings as my incoming mail server. In the same window click on the Advanced tab and verify the following. Incoming server: 993 Incoming server encrypted connection: SSL Outgoing server encrypted connection TLS Outgoing server: 587 Note: You will need to change the Outgoing server encrypted connection first, otherwise it will default back to port 25. Also, if TLS doesn’t work, we were able to successfully use Auto. Click OK when finished. Now we want to test the settings, before continuing on…it’s just easier that way incase something was entered incorrectly. To make sure the settings are tested, check the box Test Account Settings by clicking the Next button. If you’ve entered everything in correctly, both tasks will be completed successfully and you can close out of the window. and begin using your account via Outlook 2010. You’ll get a final congratulations message you can close out of… And begin using your account via Outlook 2010. Conclusion Using IMAP allows you to synchronize email across multiple machines and devices. The IMAP feature in Gmail is free to use, and this should get you started using it with Outlook 2010. If you’re still using 2007 or just upgraded to it, check out our guide on how to use Gmail IMAP in Outlook 2007. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailForce Outlook 2007 to Download Complete IMAP ItemsUse Gmail IMAP in Microsoft Outlook 2007Prevent Outlook with Gmail IMAP from Showing Duplicate Tasks in the To-Do BarSetting up Gmail IMAP Support for Windows Vista Mail TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp

    Read the article

  • Creating PDF documents dynamically using Umbraco and XSL-FO part 2

    - by Vizioz Limited
    Since my last post I have made a few modifications to the PDF generation, the main one being that the files are now dynamically renamed so that they reflect the name of the case study instead of all being called PDF.PDF which was not a very helpful filename, I just wanted to get something live last week, so decided that something was better than nothing :)The issue with the filenames comes down to the way that the PDF's are being generated by using an alternative template in Umbraco, this means that all you need to do is add " /pdf " to the end of a case study URL and it will create a PDF version of the case study. The down side is that your browser will merrily download the file and save it as PDF.PDF because that is the name of the last part of the URL.What you need to do is set the content-disposition header to be equal to the name you would like the file use, Darren Ferguson mentioned this on the Change the name of the PDF forum post.We have used the same technique for downloading dynamically generated excel files, so I thought it would be useful to create a small macro to set both this header and also to set the caching headers to prevent any caching issues, I think in the past we have experienced all possible issues, including various issues where IE behaves differently to other browsers when you are using SSL and so the below code should work in all situations!The template for the PDF alternative template is very simple:<%@ Master Language="C#" MasterPageFile="~/umbraco/masterpages/default.master" AutoEventWireup="true" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolderDefault" runat="server"> <umbraco:Macro Alias="PDFHeaders" runat="server"></umbraco:Macro> <umbraco:Macro xsl="FO-CaseStudy.xslt" Alias="PDFXSLFO" runat="server"></umbraco:Macro></asp:Content>The following code snippet is the XSLT macro that simply creates our file name and then passes the file name into the helper function:<xsl:template match="/"> <xsl:variable name="fileName"> <xsl:text>Vizioz_</xsl:text> <xsl:value-of select="$currentPage/@nodeName" /> <xsl:text>_case_study.pdf</xsl:text> </xsl:variable> <xsl:value-of select="Vizioz.Helper:AddDocumentDownloadHeaders('application/pdf', $fileName)"/> </xsl:template>And the following code is the helper function that clears the current response and adds all the appropriate headers:public static void AddDocumentDownloadHeaders(string contentType, string fileName){ HttpResponse response = HttpContext.Current.Response; HttpRequest request = HttpContext.Current.Request; response.Clear(); response.ClearHeaders(); if (request.IsSecureConnection & request.Browser.Browser == "IE") { // Don't use the caching headers if the browser is IE and it's a secure connection // see: http://support.microsoft.com/kb/323308 } else { // force not using the cache response.AppendHeader("Cache-Control", "no-cache"); response.AppendHeader("Cache-Control", "private"); response.AppendHeader("Cache-Control", "no-store"); response.AppendHeader("Cache-Control", "must-revalidate"); response.AppendHeader("Cache-Control", "max-stale=0"); response.AppendHeader("Cache-Control", "post-check=0"); response.AppendHeader("Cache-Control", "pre-check=0"); response.AppendHeader("Pragma", "no-cache"); response.Cache.SetCacheability(HttpCacheability.NoCache); response.Cache.SetNoStore(); response.Cache.SetExpires(DateTime.UtcNow.AddMinutes(-1)); } response.AppendHeader("Expires", DateTime.Now.AddMinutes(-1).ToLongDateString()); response.AppendHeader("Keep-Alive", "timeout=3, max=993"); response.AddHeader("content-disposition", "attachment; filename=\"" + fileName + "\""); response.ContentType = contentType;}I will write another blog soon with some more details about XSL-FO and how to create the PDF's dynamically.Please do re-tweet if you find this interest :)

    Read the article

  • Updated Security Baseline (7u45) impacts Java 7u40 and before with High Security settings

    - by costlow
    The Java Security Baseline has been increased from 7u25 to 7u45.  For versions of Java below 7u45, this means unsigned Java applets or Java applets that depend on Javascript LiveConnect calls will be blocked when using the High Security setting in the Java Control Panel. This issue only affects Applets and Web Start applications. It does not affect other types of Java applications. The Short Answer Users upgrading to Java 7 update 45 will automatically fix this and is strongly recommended. The More Detailed Answer There are two items involved as described on the deployment flowchart: The Security Baseline – a dynamically updated attribute that checks to see which Java version contains the most recent security patches. The Security Slider – the user-controlled setting of when to prompt/run/block applets. The Security Baseline Java clients periodically check in to understand what version contains the most recent security patches. Versions are released in-between that contain bug fixes. For example: 7u25 (July 2013) was the previous secure baseline. 7u40 contained bug fixes. Because this did not contain security patches, users were not required to upgrade and were welcome to remain on 7u25. When 7u45 was released (October, 2013), this critical patch update contained security patches and raised the secure baseline. Users are required to upgrade from earlier versions. For users that are not regularly connected to the internet, there is a built in Expiration Date. Because of the pre-established quarterly critical patch updates, we are able to determine an approximate date of the next version. A critical patch released in July will have its successor released, at latest, in July + 3 months: October. The Security Slider The security slider is located within the Java control panel and determines which Applets & Web Start applications will prompt, which will run, and which will be blocked. One of the questions used to determine prompt/run/block is, “At or Above the Security Baseline.” The Combination JavaScript calls made from LiveConnect do not reside within signed JAR files, so they are considered to be unsigned code. This is correct within networked systems even if the domain uses HTTPS because signed JAR files represent signed "data at rest" whereas TLS (often called SSL) literally stands for "Transport Level Security" and secures the communication channel, not the contents/code within the channel. The resulting flow of users who click "update later" is: Is the browser plug-in registered and allowed to run? Yes. Does a rule exist for this RIA? No rules apply. Does the RIA have a valid signature? Yes and not revoked. Which security prompt is needed? JRE is below the baseline. This is because 7u45 is the baseline and the user, clicked "upgrade later." Under the default High setting, Unsigned code is set to "Don’t Run" so users see: Additional Notes End Users can control their own security slider within the control panel. System Administrators can customize the security slider during automated installations. As a reminder, in the future, Java 7u51 (January 2014) will block unsigned and self-signed Applets & Web Start applications by default.

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >