Search Results

Search found 6897 results on 276 pages for 'samsung mobile'.

Page 205/276 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• Have it fixed or buy a new one?

  - by Workshop Alex

  My dual-monitor system has just become a single-monitor system again when the older monitor decided it would be nice to just turn to black. It's a Samsung LCD monitor and is over three years old. Not sure if the warranty is still valid but I just wonder what option would me more efficient: 1) Have the monitor fixed for a small amount. 2) Buy a new monitor for a slightly bigger amount. When monitors were still expensive, I wouldn't doubt about this and would just have my monitor repaired. But prices are so low nowadays, (and repairs are expensive) that I wonder if it's worth the trouble... Of course, I'm in no hurry since I still have another monitor. It's just that I liked the dual-monitor setup. Solved! Just ordered a new monitor. A Samsumg Syncmaster T260HD 25,5". Much more than it would cost me if I just had my old one repaired but I noticed that this one has a build-in TV tuner, plus speakers. It's way more expensive than a repair, but it's worth the additional value it provides.

  Read the article

• ssd firmware, linux: updating large batch of drives

  - by wryfi

  I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's bootable ISO does not recognize. None of the affected machines has a Windows license. The story is roughly similar for other SSD mfrs, including Samsung and Intel. To resolve this issue, I was forced to stop each machine, remove the affected SSD, remove the SSD from its hotswap caddy, install it temporarily into my ThinkPad, flash the firmware, reverse, rinse, repeat. It took the better part of a day to get through all the affected devices. I am looking for hardware, software, and/or purchasing strategies to ease this pain, as SSD firmware bugs seem inevitable, and our SSD footprint is growing. My first thought is to get a laptop with eSATA and one of these cables (http://www.newegg.com/Product/Product.aspx?Item=N82E16812311004). That should at least make it so I don't have to remove the drives from their caddies. Surely others have run into this. Any novel solutions?

  Read the article

• Why is hibernation still used?

  - by Moses

  I've never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I've never truly understood why it's used. With today's technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me when modern technology is considered, but perhaps there are applications that I'm not considering. What was the original purpose behind hibernation, and why do people still use it? Edit: I rescind my comment about hibernation being obsolete, as it obviously has very practical applications to laptops and mobile PCs, considering the power restrictions. I was mostly referring to hibernation being used on a desktop.

  Read the article

• Deployment of broadband network

  - by sthustfo

  Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• Very high-pitched noise when computer does something intense?

  - by Starkers

  "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

  Read the article

• Getting error to access webservice.

  - by nemade-vipin

  hi friend, I have created webapplication in which I am getting the error:- ypeError: Error #1009: Cannot access a property or method of a null object reference. at FlexSBTSApp/displayString()[E:\Users\User1\Documents\Flex Builder 3\FlexSBTSApp\src\FlexSBTSApp.mxml:38] at FlexSBTSApp/___FlexSBTSApp_Button1_click()[E:\Users\User1\Documents\Flex Builder 3\FlexSBTSApp\src\FlexSBTSApp.mxml:118] my code is:- import mx.controls.*; [Bindable] private var childName:ArrayCollection; [Bindable] private var childId:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; [Bindable] private var childObj:Child; public var user:SBTSWebService; public function initApp():void { user = new SBTSWebService(); user.addSBTSWebServiceFaultEventListener(handleFaults); } public function displayString():void { // Instantiate a new Entry object. var newEntry:GetSBTSMobileAuthentication = new GetSBTSMobileAuthentication(); newEntry.mobile=mobileno.text; newEntry.password=password.text; user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); user.getSBTSMobileAuthentication(newEntry); } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null && event.result._return>0) { if(event.result._return > 0) { var UserId:int = event.result._return; getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } public function getChildList(userId:int):void { var childEntry:GetSBTSMobileChildrenInfo = new GetSBTSMobileChildrenInfo(); childEntry.UserId = userId; user.addgetSBTSMobileChildrenInfoEventListener(sbtsChildrenInfoResult); user.getSBTSMobileChildrenInfo(childEntry); } public function sbtsChildrenInfoResult(event:GetSBTSMobileChildrenInfoResultEvent):void { if(event.result != null && event.result._return!=null) { arrayOfchild = event.result._return as Array; photoFeed = new ArrayCollection(arrayOfchild); childName = new ArrayCollection(); for( var count:int=0;count<photoFeed.length;count++) { childObj = photoFeed.getItemAt(count,0) as Child; childName.addItem(childObj.strName); } } } ]]> <mx:Panel width="500" height="300" headerColors="[#000000,#FFFFFF]"> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno" /> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="displayString()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> <mx:RadioButtonGroup id="radioGroup"/> <mx:Repeater id="fieldRepeater" dataProvider="{childName}"> <mx:RadioButton groupName="radioGroup" label="{fieldRepeater.currentItem}" value="{fieldRepeater.currentItem}"/> </mx:Repeater> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Trace Path"> </mx:Form> </mx:TabNavigator> </mx:Panel>

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• Scaling databases with cheap SSD hard drives

  - by Dennis Kashkin

  Hey guys! I hope that many of you are working with high traffic database-driven websites, and chances are that your main scalability issues are in the database. I noticed a couple of things lately: Most large databases require a team of DBAs in order to scale. They constantly struggle with limitations of hard drives and end up with very expensive solutions (SANs or large RAIDs, frequent maintenance windows for defragging and repartitioning, etc.) The actual annual cost of maintaining such databases is in $100K-$1M range which is too steep for me :) Finally, we got several companies like Intel, Samsung, FusionIO, etc. that just started selling extremely fast yet affordable SSD hard drives based on SLC Flash technology. These drives are 100 times faster in random read/writes than the best spinning hard drives on the market (up to 50,000 random writes per second). Their seek time is pretty much zero, so the cost of random I/O is the same as sequential I/O, which is awesome for databases. These SSD drives cost around $10-$20 per gigabyte, and they are relatively small (64GB). So, there seems to be an opportunity to avoid the HUGE costs of scaling databases the traditional way by simply building a big enough RAID 5 array of SSD drives (which would cost only a few thousand dollars). Then we don't care if the database file is fragmented, and we can afford 100 times more disk writes per second without having to spread the database across 100 spindles. . Is anybody else interested in this? I've been testing a few SSD drives and can share my results. If anybody on this site has already solved their I/O bottleneck with SSDs, I would love to hear your war stories! PS. I know that there are plenty of expensive solutions out there that help with scalability, for example the time proven RAM-based SANs. I want to be clear that even $50K is too expensive for my project. I have to find a solution that costs no more than $10K and does not take much time to implement.

  Read the article

• Adobe Illustrator - Objects are Expanded on Restart

  - by Shatou Dev

  I use Adobe Illustrator extensively for mobile development. For example, for Android app, I have many illustrations with different densities and sizes. I use many effects such as outer glow, round corners and such. However, sometimes, when I close the .ai file and re-open it later, I found all my objects expanded. Effects are expanded. For example, the round corner effect is now expanded and I cannot re-size any object. I am using a MacBook Pro. I am suspecting both Time Machine and Dropbox. As much as I can recall, it also appears with CS6 version, not CS5.

  Read the article

• Linux only recognizes 800Mhz from 2Ghz

  - by Leo

  I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

  Read the article

• Will Bluetooth hands-free drivers be installed if BT stack doesn't support A2DP?

  - by AndrejaKo

  I have a hands-free device which has no problems being paired with windows and I can set it to be the default sound output device, I don't actually hear anything on the unit, but it worked fine with GNU/Linux and with my mobile phone. From what I can see, the cause of that is usually a problem with Bluetooth stack. I think that I have Broadcom Bluetooth stack installed, so it should be working but it isn't. To make things better, my Bluetooth radio is integrated into my laptop and manufacturer isn't providing drivers for it and Broadcom itself recently pulled support, so I can't just reinstall the stack to make sure I have newest version.

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• How do you keep up with Nagios/Capistrano configs when using EC2?

  - by imaginative

  I use Amazon EC2 for my mobile app. Depending on load of the application at a given time, I might spawn new instances and then take them down when load is lower to save costs. How does one keep up with Nagios configurations for such a dynamic environment? When one deals with managed hardware, configuration files are predictable. In this case Nagios, Capistrano and a bunch of other configuration files would need to be added. Capistrano needs to know where to deploy a new build to for an app server. Nagios needs to know to remove an existing instance or add a new instance for monitoring. Nagios also needs to know if a node was intentionally taken down or if the host is down due to error. How is this done with the wonderful world of VPS/dynamic instances?

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Using Apache Environment Variables to set custom ErrorDocument

  - by Tad

  I've got a set of RewriteCond rules that test for various mobile devices and then set environment variables like "env=device:.iphone" or "env=device:.smartphone" if the useragent matches an iPhone or Android device. I'm trying to now redirect the user to custom-styled 404/500 server error pages for each device, by way of the error pages. Ideally I'd like to be able to test for a variable being there, and then write in a custom ErrorDocument string. But an apache doesn't seem to work in this case. Any ideas how I can construct if/else tests in an apache conf file for environment vars?

  Read the article

• Blue screen MEMORY_MANAGEMENT on Windows 7 Enterprise

  - by Lucas Kauffman

  I'm running a machine (MSI GT 70) with 32 GB ram as a mobile server. It seems that at random points in time it will BSOD with as message MEMORY_MANAGEMENT. So the first thing I did was do several memtests, but they did not give away any defective modules. I'm a bit clueless at the moment as it just seems to happen at random points in time giving me little or no indication of what might be wrong. I opened up the dumps with BSODviewer, they just seem to point to the windows kernel. I tried reinstalling Windows but the behavior remains the same.

  Read the article

• Baffling Exchange 2010 issue , Outlook 2003

  - by Nick Weber

  Recently we upgraded from Exchange 2003 to Exchange 2010. The Exchange 2003 server is still up and active with a handful of users still there we are planning on migrating. Also we have mobile devices and a Blackberry BES server setup publishing to Exchange 2010 public folders free busy. The unfortunate issue is majority of our clients are still Outlook 2003. The issue seems to be hit and miss but sometime clients cannot view other client’s calendars. They get (cannot refresh free/busy) when they add another user and check their available times. This is also true with booking resources (conference rooms) . One thing we noticed is that the Blackberry BES seems to have created its own free/busy folders, so we have some users who use the BES on free/busy folder and other users who don’t use the BES on other free/busy folders. If any of the clients log-in via “Exchange 2010” web-access or with a Outlook 2007 client they can view the calendaring just fine. Thanks for your help Nick @Toshana

  Read the article

• Failure to obtain IP with ARP over Wi-Fi with personal Wi-Fi router in client mode

  - by axk

  I'm trying to connect a Samsung TV to the Internet using a TL-MR3020 personal wireless router in client mode. The TV fails to connect to the network. It sees the ethernet cable connected though. Here's my network topology: Here's what I've captured with Wireshark filtering for ARP (eth.type == 0x0806): It appears the TV fails to get the IP of the gateway (DSL modem/router) for some reason. One thing I've noticed is that the source MAC for the ARP requests coming from the TV is the MAC of the Portable wireless router (that is cd:89:00), not the TV itself and the modem sends the responses to that MAC (I'm not an expert and don't know if its okay or it may make the TV fail to get the requested IP). Also I'm able to ping the TV from the DSL router (through the telnet interface) and the router has an entry in its MAC table for the TV's IP with the Portable wireless router's MAC (that is cd:89:00). If I'm able to ping the TV I suppose it should know the router's MAC to respond to the ping, but then why these continuous ARP requests... I've also tried to connect my desktop trough this Portable wireless router the same way I'm trying to connect the TV and it works fine, I can set the DSL Modem's IP as the default gateway on the desktop's NIC and connect to the Internet. The TV can connect to the Internet when connected to the DSL Router with a wired connection. Any suggestions on what may be the cause of the problem / how to further debug it are welcome. Thanks!

  Read the article

• Looking for an easier Skype video chat alternative

  - by Paul

  Is there any software 'easier to use' than Skype - ie to get a video conversation going you have to turn on the computer, make sure the speakers are turned on, make sure the web cam is connected, make sure you click answer with Video... I would like to buy a 'single red button' which does all of the above. - Any recommendations? Update @Eric Koslow comment My original question title was "Is there any software/hardware 'easier to use' than Skype?" So the answer is not necessarily a computer running a program, although it might be. I realise Skype makes a good attempt at helping to ensure speakers and web cam are working and helps you to sort them out if they are not, and for a person who isnt computer phobic this should be enough. However I am interested if there is anything available that is 'easier' than this - ie I'm looking for my 'single' red button. ie the mobile phone with video call maybe the closest answer so far, but I would prefer something as 'free' as Skype is.

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• Video on demand streaming solution

  - by Rafal Saltarski

  we are looking into building a commercial vod service and I'm doing research on the subject. We need the video to be protected with DRM so users cant rip/copy (i realise its mostly useless but the lawyers demand it from us) and the server solution to be scalable and able to distrubute content in hd to a high number of clients. Besides, we would need to be able to develop a player integrated with the payment system, so users that havent bought access would for example only see the first 30 seconds of video and then have the playback interrupted, or only be able to watch video for 72h after payment. Also it would be nice if we could distribute video to mobile platforms like android/wp8/ios but thats not a priority at the moment. I have zero experience on that topic so I would greatly appreciate any feedback or giving me stuff to read about like protocols or key phrases i should know. Thanks

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• datawind ubislate 9ci tablet computer hanging on boot

  - by user57924

  I am new to this forum. I purchased a new tablet Datawind Ubislate 9ci. It is a 9 inch no-bluetooth tablet. Details: Android 4.1.1 Rock chip RK2928 KERNEL linux version 3.0.36 I was trying to install CWM through mobile odin and ROM manager but my tablet was not supported so i downloaded build.prop editor from google play and changed it to some other cwm recognizable model viz. Samsung, nexus etc. When i was doing the above mentioned procedure, suddenly my tablet is coming up to bootloading and hanging there only and not opening i went to recovery and tried to do wipe data factory reset but failed to get opened after boot android system recovery(3e) has the following options 1)reboot system now 2)apply update from ADB 3)apply update from external storage 4)update rkimage from external storage 6)wipe data factory reset 7)wipe cache partition 8)recovery system from back up i tried to do wipe data factory reset 2-3 times but still hanging at boot i had not made any back up before this bootloop and also tried hard reset by pressing needle at the back please somebody help me to get rid of this problem and also tell me how to unlock bootloader thank you

  Read the article

• windows hosted networok on windows 8

  - by tanmaysingh

  my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >