Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 205/391 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• Cisco VPN Client on Vista - Virtual Adapter

  - by ScaleOvenStove

  I have used the Cisco VPN client for years, and on XP it is pretty much rock solid, on Vista, not so much. You might be able to connect, but unless you set up a constant ping to something, it usually will disconnect, with this error: Reason 442: Failed to enable Virtual Adapater Now, most sysadmins will say, update you client - yes, I know, it hasnt mitigated the issue, ever. I have been using it on Vista since it came out, and updated my client every time a new update comes out. I have used it where the VPN server was a Cisco PIX and a Windows Box allowing the Cisco Client to connect. Anyone have any fixes that you can do on your client to fix this issue?

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• Is it possible to use a static IP assigned by my ISP for an offsite web server on a VPS (different ISP)?

  - by NightOwl888

  I have a web server on a Virtual Private Server with a hosting provider. Unfortunately, they are really stingy with IP addresses and I need to run several SSL certificates on my server, so I will need a few more than I have. I have a block of 5 static IP addresses on a business package through a different ISP and I am only using 1 of them for connectivity in the office. What I am wondering is if it is possible to use the 4 unused static IP addresses from this ISP on my VPS, which is hosted by another ISP? The VPS (web server) is running Windows Server 2008 R2 Web Edition. If this can be done, please let me know how to configure it.

  Read the article

• Find slow network nodes between two data centers

  - by 2called-chaos

  I've got a problem with syncing big amount of data between two data centers. Both machines have got a gigabit connection and are not fully occupied but the fastest that I am able to get is something between 6 and 10 Mbit = not acceptable! Yesterday I made some traceroute which indicates huge load on a LEVEL3 router but the problem exists for weeks now and the high response time is gone (20ms instead of 300ms). How can I trace this to find the actual slow node? Thought about a traceroute with bigger packages but will this work? In addition this problem might not be related to one of our servers as there are much higher transmission rates to other servers or clients. Actually office = server is faster than server <= server! Any idea is appreciated ;) Update We actually use rsync over ssh to copy the files. As encryption tends to have more bottlenecks I tried a HTTP request but unfortunately it is just as slow. We have a SLA with one of the data centers. They said they already tried to change the routing because they say this is related to a cheap network where the traffic gets routed through. It is true that it will route through a "cheapnet" but only the other way around. Our direction goes through LEVEL3 and the other way goes through lambdanet (which they said is not a good network). If I got it right (I'm a network intermediate) they simulated a longer path to force routing through LEVEL3 and they announce LEVEL3 in the AS path. I basically want to know if they're right or they're just trying to abdicate their responsibility. The thing is that the problem exists in both directions (while different routes), so I think it is in the responsibility of our hoster. And honestly, I don't believe that there is a DC2DC connection which only can handle 600kb/s - 1,5 MB/s for weeks! The question is how to detect WHERE this bottleneck is

  Read the article

• Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

  - by WMR

  Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

  Read the article

• Best way to split LAN computers on two WANs (not load balancing)

  - by lpfavreau

  What is the best way to split the computers of a LAN (about 50 computers) to go on two WANs, depending on the computers' IP address or computers' configuration (gateway). I'm not looking for load-balancing, I need to be able to route which computer uses which Internet connection. A solution would be to rewire the old office to split the two distinct groups that need to use two different Internet connections but I'm not sure it's worth it at the moment. I have a pfSense router configured with the LAN (DHCP), WAN1 and WAN2. I also have the IP addresses (and ability to configure) the next router on WAN1 and the one on WAN2. What would you suggest? Routing based on IP addresses ranges? Different gateways? VLANs would be difficult for the same reason as to why rewire is a bit complicated. Thanks!

  Read the article

• Gnome Panel Hardships -- Need to get my utilities back!

  - by Josiah Kiehl

  So I removed the cool new social utility on my gnome panel with the intention of readding it to the bar somewhere else.... only to find out that it was not listed on my "add to panel" box. How do I get it back? Same goes for my volume slider.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• How can I access the host machine from a Virtual one?

  - by Patrick

  I'm using VMWare Fusion to run Windows {OS} on my Mac. How can I access the host machine (my Mac) from the Windows virtual one? I tried localhost but that didn't work.

  Read the article

• Windows Vista: TCP/IP stack is smashed, how to reinstall the LAN-Devices?

  - by Ice

  the TCP/IP stack is smashed, thats why no LAN-Connections are running. I want to download the LAN drivers from another computer and uninstall and reinstall the LAN devices on this system. Hopefully that should recreate the stack. But what to download? What uninstall? How to install? Windows Vista is protected against such changes, so how to achieve that job? please help. Update per 2011-03-11: I found all the tipps and hints about "TCP/IP Repair, LSP Fix, and WinSock Fix" according to windows vista but nothing helped to bring back network access. What can i do as next step or which opportunities are left?

  Read the article

• Will my internet address for my internal site cause my traffic to go external?

  - by Toby Allen

  If I have two domains pointing to the same machine, but one resolves to an internal address and the other to my internet facing router, will there be any differnce in route taken to my machine (primarily in terms of performanc). eg. internal.mydomain.com resolves to 192.168.1.200 external.mydomain.com resolves to A.Web.External.IP both eventually resolve back to the same machine. For a client in the network, will using the external address give a performance penalty?

  Read the article

• Prevalence of WMI enabled in real Windows Server networks

  - by TripleAntigen

  Hi I would like to get opinions from systems administrators, on how common it is that WMI functionality is actually enabled in corporate networks. I am writing an enterprise network application that could benefit from the features of WMI, but I noted after creating a virtual network based on Server 2008 R2, that WMI seems to be disabled by default. Do systems admins in practical corporate networks enable WMI? Or is it usually disabled for security purposes? What is it used for if it is enabled? Thanks for any advice! MORE INFO: I should have said, I really need to be able to query the workstations but I understand that by default the WMI ports on Win7 and XP firewalls (at least) are disallowed, so do you use some sort of group policy or other method to leave a hole open for WMI on the workstations? Or is just the servers that are of interest? Thanks for the responses!!

  Read the article

• Windows 7 file sharing password protecting or making stuff available to just me

  - by Carbonara

  Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system? (To move all files to a

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it) The XP machine runs XP home and hence has "simple file shairing" turn on. So it seems that even if I create a admin account (with password) and connect with that account, it still comes in as "guest" on the XP machine. Chooseing to share the folder I want access to rather then the top of the disk drive seems to work, but is a pain as I need to share each user's folder with a different share name. If the new computer was not a laptop, I would just plug the hard disk from the old machine into it, but being a laptop I don't have that option.

  Read the article

• How can I detect if a NIC is UP in UNIX?

  - by Rich

  I am currently writing a bash script (for Nagios), and I would like to be able to detect if specific network cards are up or not. My best guess is to do something like this: ifconfig eth0 | grep UP | wc -l or: ethtool eth0 | grep "Link detected: yes" | wc -l Are either/both of those reliable ways of testing if the network card is up, or is there a better option? Perhaps there is a flag on ethtool which will do precisely what I want? Thanks in advance for any suggestions/pointers! Rich

  Read the article

• How to route between 2 networks with a server with 2 network cards?

  - by LumenAlbum

  This is the first time I am faced with routing and it seems I have hit a dead end. I have the following scenario: client1: 192.168.1.10 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 client2: 192.168.1.20 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 server (Windows Server 2008 R2 with enabled RAS & Routing Services) network card 1 (connected to a switch along with the clients) 192.168.1.100 255.255.255.0 DNS server: 127.0.0.1 network card 2 (connected to the router) 192.168.2.100 255.255.255.0 gateway: 192.168.2.1 DNS server: 127.0.0.1 (DNS forwarding to 192.168.2.1) ISP router (with connection to internet) 192.168.2.1 Now in this scenario I have tried to route traffic from the 192.168.1.0/24 network with the clients to the 192.168.2.0/24 network with the routers to connect them to the internet. However, no matter what I do I get no positive ping to the router 192.168.2.1. Ping from 192.168.168.1.10 to 192.168.1.20: Success to 192.168.1.100: Success to 192.168.2.100: Success to 192.168.2.1: not reachable The routing table contains the 2 routes 192.168.1.0 and 192.168.2.0 as directly connected. Does anyone know where the routing fails? I have searched different forums but mostly found nothing relevant. One post however pointed out that in a similar situation the problem was that the router doesn't know the way back and the internet router would need a static route back to the first router. If that really is the case, I take it there is no solution with my equipment, because the standart ISP router doesn't allow to set any static routes.

  Read the article

• Slackware - Assigning routes (IP address ranges) to one of many network adapters

  - by Dogbert

  I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

  Read the article

• How to find on the Windows 7 who and when use(d) a certain share?

  - by John Thomas

  We have a workstation using Win7 on a LAN with a domain. On that workstation we set up some network shares. Can we find who used (user name and/or computer name) and when the shares? Note that we know about Computer Management System Tools Shared Folders Open Files. We don't want to see so much real-time who's using the shares but we are interested more in a logging solution, ideally interpreting / using the data from Win7's Event Viewer.

  Read the article

• Port knocking via SSH tunnels

  - by j0ker

  I have a server running in my university's internal network. There is only one SSH daemon running which is secured by port knocking with knockd. Works fine if I try to connect from within the internal network. But since the server has no external IP, I have to tunnel into the internal network every time I want to access the server from outside. And since tunneling only works for a single port I cannot do the port knocking as easily as from an internal client. In fact, I don't get it to work at all. What I'm trying is opening tunnels for all the different ports that have to be knocked. Then I send TCP-SYN packets into the tunnels. But that doesn't work even for a single port. If I establish the tunnel on the first port in the knock sequence and send a packet through it, it doesn't reach the server. There is no entry in the log file of knockd, while there should be something like 123.45.67.89: openSSH: Stage 1 (as shown with internal knocks). So I guess, the problem doesn't exist within my knocking script but is a more general one. Are there any known problems with what I'm trying to do? Is it even possible or am I missing something? Thanks in advance!

  Read the article

• How do I purge or empty Windows Explorer's network username and sharename cache?

  - by Abel

  While troubleshooting a Samba vs Windows Network issue, I noticed that Windows' Explorer remembers login credentials of remote shares, even if you ask it not to. For instance, after accessing a share using \\servername\sharename plus entering username/password and then closing Windows Explorer, adding the same share as a network drive gives the following message, regardless whether the username is the same or not: The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share. Using NET USE does not show the share. After restarting the computer, I have no problems accessing the share using different credentials. But restarting just for testing other credentials is annoying, esp. while troubleshooting. How can I purge this cache, using Windows Vista? Note: using nbtstat -R[R], ipconfig /renew, killing explorer.exe or disabling / re-enabling the network card didn't help.

  Read the article

• Finding a private (NAT) host's IP using historic destination data

  - by l0c0b0x

  The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

  Read the article

• Share Internet via Ethernet from Mac OSX to Ubuntu (10.04)?

  - by lackey

  Anyone know how to share an Internet connection over Ethernet, from Mac OSX to Ubuntu (Lucid Lynx 10.04)?

  Read the article

• Why do I have only incoming traffic when copying from network source to network destination?

  - by mxp

  I have a VirtualBox VM that is located on a network share of my NAS. When I copy something from the VM's disk onto another of the NAS' network shares (so the data is visible outside the VM), the Windows 7 Task Manager shows only incoming network traffic (yellow graph). It's as if the data was only received but never sent over the network. I verified that the data arrives on the other network share. As I understand it, the data flow looks like this: +-NAS--------+ +-Win7 PC (VM Host)-+ | Share1(VM)-|>---->|-+ | | | | | | | Share2 <---|<----<|-+ | +------------+ +-------------------+ If it was like this, I would see incoming and outgoing traffic, right? What am I not getting here?

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• How to reliably synchronise file servers between London and Shanghai?

  - by Andy S

  We have two offices, one in London and one in Shanghai, each needing to be able to access the same set of files. This means we need a solid, speedy means of synchronising a set of folders between servers at either office. They're likely to be Windows servers, but we could look at Linux boxes if the software side makes more sense on *nix. We've considered Rsync, Unison, Gluster, and a few other options, but none of them seem capable of reliably keeping the servers in sync between such distant office locations. Each office is on DSL connectivity over the open internet, so encryption is also a factor. Does anyone have any hints for getting the servers synchronising in as close to real time as possible, without dying constantly? Andy

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >