Search Results

Search found 7592 results on 304 pages for 'fenchkiss dev'.

Page 206/304 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• how to switch played music when someone enters

  - by ymajoros

  My wife has a small shop, and she plays free licensed music. She can't legally play her own music when people outside of the family circle are present in the shop. How can I automatically switch music when someone enters? I was thinking of some bluetooth door detector and some custom software, but can't seem to find either. I'm a software architect/dev and can write it if necessary, but I'd prefer to use some existing solution. Any ideas on good hardware and software for this?

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• Running a script at startup as root?

  - by Usman Ajmal

  Hi i developed a script which I set to run at startup i.e. when the Desktop appears. In the script I mounted a partition using sudo mount /dev/sda1 /mnt &> result.txt After executing script a file named result.txt was created which contained sudo: no tty present and no askpass program specified In other words the mounting failed. If I run the script using sudo ./myProgram i don't face this problem and the drive gets mounted successfully. Any suggestions please....

  Read the article

• RAID 5 heavy IO hard freezes Ubuntu: Why?

  - by Luke has no name

  I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

  Read the article

• Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

  - by iyl

  I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

  Read the article

• How can I make a non-destructive copy of a (NTFS) partition?

  - by violet313

  I want to recover some deleted files from a healthy NTFS partition on an undamaged hard-disk. In order to leave the partition undisturbed, i plan to use dd to clone the partition to a raw image file & then attempt recovery from that mounted clone. Will dd if=/dev/sd<xn> of=/path/to/output.img perform a non-destructive copy ? Is attempting a restore from a clone using dd the best approach? [edit, wrt Deltiks answer, i need to be a bit clearer about what i'm asking] eg: are there some s/w that can do something more with the original sectors ? eg: if it was a damaged hard-disk i am aware that any kind of read is potentially destructive. but assuming my disk head is not going to suddenly spaz out etc, am i reducing my chances of a successful recovery (at any cost) by using an apparently non-destructive single read of my undamaged hard-disk. (btw: i am planning on using ntfsundelete & testdisk for recovery)

  Read the article

• Why is my portable WD MY PASSPORT drive is not recognized?

  - by kloop

  My "MY PASSPORT" (Western Digital) portable drive is not recognized OSx. It used to be recognized, but not anymore. It does not appear in /Volumes. The hard drive is recognized by a Linux machine. I am not sure what happened -- any ideas how to fix that? Thanks. EDIT: ` #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *750.2 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 749.3 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *1.0 TB disk1 1: DOS_FAT_32 MY PASSPORT 1.0 TB disk1s1 `

  Read the article

• How can I check for a string match AND an empty file in the same if/then bash script statement?

  - by Mike B

  I'm writing a simple bash script to do the following: 1) Check two files (foo1 and foo2). 2) If foo1 is different from foo2 and foo1 NOT blank, send an email. 3) If foo1 is the same as foo2... or foo1 is blank... do nothing. The blank condition is what's confusing me. Here's what I've got to start with: diff --brief <(sort ./foo1) <(sort ./foo2) >/dev/null comp_value=$? if [ $comp_value -ne 0 ] then mail -s "Alert" [email protected] <./alertfoo fi Obviously this doesn't check for blank contents. Any thoughts on how to do that?

  Read the article

• Clean Install: Ubuntu 8.04, 10.04 or somthing else?

  - by Robert S. Barnes

  I'm faced with a pending clean install due to a dying hard drive in my old Dell Inspiron 8600 laptop. I've been running Ubuntu 8.04 on it since... 8.04 and I've been more or less happy with it except that it's a PITA to recompile the kernel or do any other kernel related work. I mostly do software dev on it, gcc, gvim, c/c++/perl/php/mysql and running vmware server 2.0. I've heard mixed reviews of 10.04, and am wondering what to put on the new HD. I'm even considering just sticking with 8.04 as it seems to mostly meet my needs. Any suggestions?

  Read the article

• 2 Nics - Same Subnet..Route backup traffic through one of them

  - by Matthewhall58

  I have a windows server and a centos linux server. I want the nightly backup file (targz) that copies to the windows machine to use a different nic so that the main nic is not burdenend with moving the large file. Each server has 2 Nics in it. the network is 10.173.10.0 mask 255.255.255.192 Centos Linux Box: Eth0 is configured with 10.173.10.80 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is configured with 10.173.10.71 mask 255.255.255.192 gw 10.173.10.65 Windows Box Eth 0 is 10.173.10.72 mask 255.255.255.192 gw 10.173.10.65 Eth 1 is 10.173.10.70 mask 255.255.255.192 gw 10.173.10.65 I can ping each machine from each machine. On the linux machine I use the command route add -host 10.173.10.70 dev eth1 but then when i ping 10.173.10.70 it is unreachable..... WHY?

  Read the article

• Two distinct mount points with one device

  - by user1761555

  After being disappointed with Ubuntu's release update feature, I finally decided to have separate mount points for / and /home. Towards this, I reformatted my HDD giving most of my drive to sda1(meant to be /home) and allocated about 40GB to rootfs (/). Unfortunately, I would also like to have a /projects which is to be located on sda1. Currently, sda1 is being mounted as /dev/sda1 on /home type ext4 (rw) I've tried looking online for a solution to this problem..however, I'm not sure as to what to look for! Is it possible to mount the 'home' directory of sda1 as /home and 'projects' directory of sda1 as /projects?

  Read the article

• How to set a low process priority for everything spawned from a command prompt in XP?

  - by Binary Worrier

  As a developer, once or twice a week I run a full build on my XP dev machine. This will run at 100% cpu for 30 or 40 minutes, making my machine usless for anything other than basic browsing & email. Is there anyway I can specify that for a given process (i.e. a command prompt) it and any process spawned by it will hae a lower priority, say taking up no more than 60 - 70% of CPU, leaving my machine more usable. I don't mind the build talking 30 or 40% longer, if I still have use of my machine while it's running. Thanks BW P.S. I'd love to be able to throw more hardware at the problem, but that isn't under my control.

  Read the article

• Linux Raid: Can mdadm --grow a raid1 while mounted?

  - by Chris

  I have 2 500gb drives in a RAID1 setup that I needed to upgrade for more space. I mdadm --fail'ed each drive in turn and I used dd to copy each drive to it's respective larger drive (2tb each), removed the smaller drives and replaced them with the larger drives, and reassembled the array and forced a resync. So now I've got a 500gb RAID1 sitting on 2TB drives, and wish to grow them. The plan is to use mdadm --manage /dev/md0 --grow to grow them, then boot a rescue cd, assemble the array under that environment, and do the resize2fs on them. Can I use mdadm --grow on a mounted and live filesystem? Also, do I need more options to make sure the grow operation stays raid1?

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• Run a specific command from a directory

  - by Cameron Kilgore

  I have a bash script where I need to run an init utility within a directory with a configuration file defined. I don't think it's possible to explicitly tell the utility to run the file as an argument, so what I need to do is go to the directory with the config file, and then run the command. I have some logic in place, but its not working -- the utility never runs. Is there any way I can tell the script to go to this directory, and then run the script? cd /var/www/testing-dev.example.co eval "standardprofile"

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• Why does 'dd' not work for creating bootable USB?

  - by jdowner

  Recently I wanted to create a bootable USB of Linux mint. I found that there was a lot of conflicting advice/experience about whether the 'dd' command could be used to create a bootable USB. I decided to download an ISO and try. While dd definitely put the image on the USB stick it was not bootable. So my question is what is the magic ingredient that will make this work or why has this approach persisted if it does not work? This is the command I used, dd if=/mint/iso/image of=/dev/sdb1 oflag=direct

  Read the article

• How to avoid loop limitation in a openvz container?

  - by mat.viguier

  On a openVZ containing Deb7 I need to lock the maximum size of a folder, which is used to upload on a php based web server. The directory is synced, so I have to lock the maxsize. MAXSIZE should be upgradable by adding some physical disk later ... I want to use a file as a block device for a file system. So I have done : dd if=/dev/zero of=/disk2/filesystem.dat bs=1M count=100 Then, I made the filesystem on it mkfs.ext4 filesystem.dat Then I tried to mount it : mkdir /opt/filesystem ; mount /disk2/filesystem.dat /opt/filesystem My OpenVZ (it is on a VPS) has no loop module in the kernerl. So I got Could not find any loop device as usual under OpenVz So i think I have to use FUSE, but I really do not know HOW .... Any idea on locking the size of directory under OpenVZ ?

  Read the article

• Own mediawiki/wikipedia naming convention for pages

  - by Andy M

  I recently installed a mediawiki at home and I'm looking for a way to name pages. Let's say I have the following structure : Main - Dev - C# - Tips Main - Cooking - Mexixan Cooking - Tips Main - Annoying my girlfriend - Tips Each final page is a different Tips page. Naming them only "tips" won't work because I need three different pages. Now, I could name each of my tips page with its "path" (ex: main_cooking_mexican_cooking_tips) but it looks cumbersome and the problem is that, whenever I'll change the structure of my mediawiki, some pages will need to change their name in order to be corrects. Does it exist some convention to follow regarding this ? Thanks for your help !

  Read the article

• Hard drive partition size wrong. How do I resize without loss of data?

  - by BreezyChick89

  $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! It should be 1 partition but it now shows 2.2tb partitioned and .3tb unpartitioned How do I make the first partition correctly be 2.5tb without destroying whatever is in either partition? I did not raid or anything. My devices have been getting repeatedly corrupt by thunderstorms. Looks like people recommend doing something like in other places. sudo resize2fs /dev/sdc1 610471680

  Read the article

• df -h overreports disk space on VPS

  - by Rincewind42

  When I run the command df -h on my new Ubuntu linux vServer I get the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/hdv1 466G 33G 434G 7% / none 16M 0 16M 0% /tmp Running du -sh gives # du -sh du: cannot access `./proc/13624/task/13624/fd/4': No such file or directory du: cannot access `./proc/13624/task/13624/fdinfo/4': No such file or directory du: cannot access `./proc/13624/fd/4': No such file or directory du: cannot access `./proc/13624/fdinfo/4': No such file or directory 952M . The VPS should only have 5Gb of disk space but df reports 466Gb. How can I view the correct amount of disk space?

  Read the article

• Access from one VM to an Other

  - by meo

  I got a Linux VM Image from a dev in our company to develop on it. This works nice, but now i need to do some Internet Explorer testing, for that i have an other VM with windows on it. I have an entry in my hosts file under macos that redirect some virtual domain to the IP of the linux VM. I tried to modify the hosts file in windows also. But i cant reach Linux VM. How can i access the Server on the linux VM with Windows VM? Are there some settings i missed?

  Read the article

• How to calculate proper amount of inode/block sizes for a linux filesystem.

  - by Donatello

  I have an old reiser filesystem which I'm going to convert to Ext3. The problem I have is to determine the proper block- and inode-sizes for this partition. The partition is 44 GB large and has to hold 3,000,000+ files of sizes between 1 kb and 10kb, how can I figure out the best ratio of inodes and blocksize? The below is something I tried which seems OK but makes the copying files incredibly slow. mkfs.ext3 -t ext3 -c -c -b 1024 -i 4096 -I 128 -v -j -O sparse_super,filetype,has_journal /dev/sdb1 Thanks.

  Read the article

• Large volume at /mnt on AWS instance

  - by rhaag71

  I know this is probably a somewhat 'dumb' question :) I have an AWS (small) instance and I just noticed that there is a ~150gb volume attached at /mnt, is this normal? It kinda freaked me out, I was thinking maybe someone was trying to capture whatever I mount in /mnt, there is the entry in my fstab too (and I found that others have this by googling)... the entry is as follows /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 I don't have any volumes this large in my AWS volumes section though. I was just trying to understand this and be sure that someone is not trying to 'get in'... as there are many attempts daily. Thanks

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >