Search Results

Search found 22036 results on 882 pages for 'vpn service'.

Page 206/882 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

    - by Kellsey Ruppel
    Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

    Read the article

  • RRAS won’t start with 8007042a or event ID 7024, aka the “routing remote access unable to load Iprtrmgr.dll”

    - by KCotreau
    History: The history of this error, which has mostly gone unsolved, dates back to Windows 2000. Platforms affected: Windows Server 2008 R2, Server 2008, Server 2003 R2, Server 2003, Server 2000 (both 32-bit and 64-bit installs are affected). Error Messages Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 2 (0x2). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 31 (0x1F). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 20205 (0x4EED). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 193 (0xC1). Event ID: 20103 Unable to load C:\WINDOWS\System32\iprtrmgr.dll . (32-bit installs). Event ID: 20103 Unable to load C:\WINDOWS\SysWOW64\iprtrmgr.dll . (64-bit installs).

    Read the article

  • "Error in the Site Data Web Service." when performing crawl

    - by Janis Veinbergs
    Installed SharePoint Services v3 (SP2, october 2009 cumulative updates, Language Pack), attached to a content database I had previously (all works). Installed Search server 2008 Express (with language pack) on top of WSS and crawl does not work. However it works for newly created web application + database. Was playing around with accounts, permissions to try get it working. Currently I have WSS_Crawler account with such permissions: Office Search Server runs with WSS_Crawler account Config database has read permissions for WSS_Crawler Content database has read permissions for WSS_Crawler WSS_Crawler is owner of search database. Added WSS_Crawler to SQL server browser user group and administrator Yes, i'v given more permissions than needed, but it doesn't even work with that and i don't know if its permission problem or what. Crawl log says there is Error in the Site Data Web Service., nothing more. There were known issues with a similar error: Error in the Site Data Web Service. (Value does not fall within the expected range.), but this is not the case as thats an old issue and i hope it has been included in SP2... Logs are from olders to newest (descending order). They don't appear to be very helpful. Crawl log http://serveris Crawled Local Office SharePoint Server sites 3/15/2010 9:39 AM sts3://serveris Crawled Local Office SharePoint Server sites 3/15/2010 9:39 AM sts3://serveris/contentdbid={55180cfa-9d2d-46e4... Crawled Local Office SharePoint Server sites 3/15/2010 9:39 AM http://serveris/test Error in the Site Data Web Service. Local Office SharePoint Server sites 3/15/2010 9:39 AM http://serveris Error in the Site Data Web Service. Local Office SharePoint Server sites 3/15/2010 9:39 AM EventLog No errors in EventLog, just some Information events that Office Server Search provides The search service started. Successfully stored the application configuration registry snapshot in the database. Context: Application 'SharedServices Component: da1288b2-4109-4219-8c0c-3a22802eb842 Catalog: Portal_Content. A master merge was started due to an external request. Component: da1288b2-4109-4219-8c0c-3a22802eb842 A master merge has completed for catalog Portal_Content. Component: da1288b2-4109-4219-8c0c-3a22802eb842 Catalog: AnchorProject. A master merge was started due to an external request. Component: da1288b2-4109-4219-8c0c-3a22802eb842 A master merge has completed for catalog AnchorProject. ULS Log Just some information, but no exceptions, unexpected errors 03/15/2010 09:03:28.28 mssearch.exe (0x1B2C) 0x0E8C Search Server Common GatherStatus 0 Monitorable Insert crawl 771 to inprogress queue hr 0x00000000 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6591 03/15/2010 09:03:28.28 mssearch.exe (0x1B2C) 0x0E8C Search Server Common GatherStatus 0 Monitorable Request Start Crawl 1, project Portal_Content, crawl 771 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2875 03/15/2010 09:03:28.28 mssearch.exe (0x1B2C) 0x0E8C Search Server Common GatherStatus 0 Monitorable Advise status change 1, project Portal_Content, crawl 771 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:28.28 w3wp.exe (0x1D98) 0x0958 Search Server Common MS Search Administration 8wn6 Information A full crawl was started on 'Local Office SharePoint Server sites' by BALTICOVO\janis.veinbergs. 03/15/2010 09:03:28.43 mssdmn.exe (0x1750) 0x10F8 ULS Logging Unified Logging Service 8wsv High ULS Init Completed (mssdmn.exe, Microsoft.Office.Server.Native.dll) 03/15/2010 09:03:30.48 mssdmn.exe (0x1750) 0x09C0 Search Server Common MS Search Indexing 8z0v Medium Create CCache 03/15/2010 09:03:30.56 mssdmn.exe (0x1750) 0x09C0 Search Server Common MS Search Indexing 8z0z Medium Create CUserCatalogCache 03/15/2010 09:03:32.06 w3wp.exe (0x1D98) 0x0958 Search Server Common MS Search Administration 90ge Medium SQL: dbo.proc_MSS_PropagationGetQueryServers 03/15/2010 09:03:32.09 w3wp.exe (0x1D98) 0x0958 Search Server Common MS Search Administration 7phq High GetProtocolConfigHelper failed in GetNotesInterface(). 03/15/2010 09:03:34.26 mssearch.exe (0x1B2C) 0x16A4 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project Portal_Content, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:35.92 mssearch.exe (0x1B2C) 0x16A4 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project Portal_Content, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:37.32 mssearch.exe (0x1B2C) 0x16A4 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project Portal_Content, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:37.23 mssdmn.exe (0x1750) 0x1850 Search Server Common MS Search Indexing 8z14 Medium Test TRACE (NULL):(null), (NULL)(null), (CrLf): , end 03/15/2010 09:03:39.04 mssearch.exe (0x1B2C) 0x16A4 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project Portal_Content, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:40.98 mssdmn.exe (0x1750) 0x0B24 Search Server Common MS Search Indexing 7how Monitorable GetWebDefaultPage fail. error 2147755542, strWebUrl http://serveris 03/15/2010 09:03:41.87 mssdmn.exe (0x1750) 0x1260 Search Server Common PHSts 0 Monitorable CSTS3Accessor::GetSubWebListItemAccessURL GetAccessURL failed: Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3acc.cxx Line:505 03/15/2010 09:03:41.87 mssdmn.exe (0x1750) 0x1260 Search Server Common PHSts 0 Monitorable CSTS3Accessor::Init: GetSubWebListItemAccessURL failed. Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3acc.cxx Line:348 03/15/2010 09:03:41.87 mssdmn.exe (0x1750) 0x1260 Search Server Common PHSts 0 Monitorable CSTS3Accessor::Init fails, Url sts3://serveris/siteurl=test/siteid={390611b2-55f3-4a99-8600-778727177a28}/weburl=/webid={fb0e4bff-65d5-4ded-98d5-fd099456962b}, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3handler.cxx Line:243 03/15/2010 09:03:41.87 mssdmn.exe (0x1750) 0x1260 Search Server Common PHSts 0 Monitorable CSTS3Handler::CreateAccessorExB: Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3handler.cxx Line:261 03/15/2010 09:03:40.98 mssdmn.exe (0x1750) 0x1260 Search Server Common MS Search Indexing 7how Monitorable GetWebDefaultPage fail. error 2147755542, strWebUrl http://serveris/test 03/15/2010 09:03:41.90 mssdmn.exe (0x1750) 0x0B24 Search Server Common PHSts 0 Monitorable CSTS3Accessor::GetSubWebListItemAccessURL GetAccessURL failed: Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3acc.cxx Line:505 03/15/2010 09:03:41.90 mssdmn.exe (0x1750) 0x0B24 Search Server Common PHSts 0 Monitorable CSTS3Accessor::Init: GetSubWebListItemAccessURL failed. Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3acc.cxx Line:348 03/15/2010 09:03:41.90 mssdmn.exe (0x1750) 0x0B24 Search Server Common PHSts 0 Monitorable CSTS3Accessor::Init fails, Url sts3://serveris/siteurl=/siteid={505443fa-ef12-4f1e-a04b-d5450c939b78}/weburl=/webid={c5a4f8aa-9561-4527-9e1a-b3c23200f11c}, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3handler.cxx Line:243 03/15/2010 09:03:41.90 mssdmn.exe (0x1750) 0x0B24 Search Server Common PHSts 0 Monitorable CSTS3Handler::CreateAccessorExB: Return error to caller, hr=80042616 - File:d:\office\source\search\search\gather\protocols\sts3\sts3handler.cxx Line:261 03/15/2010 09:03:43.26 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 24, project Portal_Content, crawl 771 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:43.26 mssearch.exe (0x1B2C) 0x1804 Search Server Common GatherStatus 0 Monitorable Remove crawl 771 from inprogress queue - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6722 03/15/2010 09:03:43.26 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project Portal_Content, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:44.65 mssearch.exe (0x1B2C) 0x1804 Search Server Common GatherStatus 0 Monitorable Insert crawl 772 to inprogress queue hr 0x00000000 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6591 03/15/2010 09:03:44.65 mssearch.exe (0x1B2C) 0x1804 Search Server Common GatherStatus 0 Monitorable Request Start Crawl 0, project AnchorProject, crawl 772 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2875 03/15/2010 09:03:44.65 mssearch.exe (0x1B2C) 0x1804 Search Server Common GatherStatus 0 Monitorable Advise status change 0, project AnchorProject, crawl 772 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:44.65 mssearch.exe (0x1B2C) 0x1804 Search Server Common GatherStatus 0 Monitorable Unlock Queue, project Portal_Content - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2922 03/15/2010 09:03:44.82 mssearch.exe (0x1B2C) 0x1DD0 Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:44.95 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project AnchorProject, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:46.51 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project AnchorProject, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:46.39 mssearch.exe (0x1B2C) 0x1E4C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.01 mssearch.exe (0x1B2C) 0x1C6C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.87 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.29 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.53 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.67 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.82 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.84 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.89 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:49.90 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project AnchorProject, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:51.42 mssearch.exe (0x1B2C) 0x1E4C Search Server Common GatherStatus 0 Monitorable Advise status change 4, project AnchorProject, crawl 772 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:51.00 mssearch.exe (0x1B2C) 0x1E4C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:51.42 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Remove crawl 772 from inprogress queue - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6722 03/15/2010 09:03:52.96 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Insert crawl 773 to inprogress queue hr 0x00000000 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6591 03/15/2010 09:03:52.96 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Request Start Crawl 0, project AnchorProject, crawl 773 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2875 03/15/2010 09:03:55.29 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Unlock Queue, project AnchorProject - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2922 03/15/2010 09:03:55.29 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Removed start crawl request from Queue 0, crawl 773 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2942 03/15/2010 09:03:55.29 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Request Start Crawl 0, project AnchorProject, crawl 773 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2875 03/15/2010 09:03:55.29 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GatherStatus 0 Monitorable Advise status change 0, project AnchorProject, crawl 773 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:55.37 mssearch.exe (0x1B2C) 0x1CCC Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:55.37 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project AnchorProject, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:56.71 mssearch.exe (0x1B2C) 0x1E4C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:56.78 mssearch.exe (0x1B2C) 0x0750 Search Server Common GatherStatus 0 Monitorable Advise status change 12, project AnchorProject, crawl -1 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:58.40 mssearch.exe (0x1B2C) 0x155C Search Server Common GathererSql 0 Monitorable CGatherer::LoadTransactionsFromCrawlInternal Flush anchor, count 0 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4943 03/15/2010 09:03:58.89 mssearch.exe (0x1B2C) 0x155C Search Server Common GatherStatus 0 Monitorable Advise status change 4, project AnchorProject, crawl 773 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:4853 03/15/2010 09:03:58.89 mssearch.exe (0x1B2C) 0x1130 Search Server Common GatherStatus 0 Monitorable Remove crawl 773 from inprogress queue - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:6722 03/15/2010 09:03:58.89 mssearch.exe (0x1B2C) 0x1130 Search Server Common GatherStatus 0 Monitorable Unlock Queue, project AnchorProject - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:2922 What could be wrong here - any clues?

    Read the article

  • Step by Step:How to use Web Services in ASP.NET AJAX

    - by Yousef_Jadallah
    In my Article Preventing Duplicate Date With ASP.NET AJAX I’ve used ASP.NET AJAX With Web Service Technology, Therefore I add this topic as an introduction how to access Web services from client script in AJAX-enabled ASP.NET Web pages. As well I write this topic to answer the common questions which most of the developers face while working with ASP.NET Ajax Web Services especially in Microsoft ASP.NET official forum http://forums.asp.net/. ASP.NET enables you to create Web services can be accessed from client script in Web pages by using AJAX technology to make Web service calls. Data is exchanged asynchronously between client and server, typically in JSON format.   Lets go a head with the steps :   1-Create a new project , if you are using VS 2005 you have to create ASP.NET Ajax Enabled Web site.   2-Add new Item , Choose Web Service file .     3-To make your Web Services accessible from script, first it must be an .asmx Web service whose Web service class is qualified with the ScriptServiceAttribute attribute and every method you are using to be called from Client script must be qualified with the WebMethodAttribute attribute. On other hand you can use your Web page( CS or VB files) to add static methods accessible from Client Script , just you need to add WebMethod Attribute and set the EnablePageMethods attribute of the ScriptManager control to true..   The other condition is to register the ScriptHandlerFactory HTTP handler, which processes calls made from script to .asmx Web services : <system.web> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" type="System.Web.Script.Services.ScriptHandlerFactory" validate="false"/> </httpHandlers> <system.web> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } but this already added automatically for any Web.config file of any ASP.NET AJAX Enabled WebSite or Project, So you don’t need to add it.   4-Avoid the default Method HelloWorld, then add your method in your asmx file lets say  OurServerOutput , As a consequence your Web service will be like this : using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services;     [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [System.Web.Script.Services.ScriptService] public class WebService : System.Web.Services.WebService {     [WebMethod] public string OurServerOutput() { return "The Server Date and Time is : " + DateTime.Now.ToString(); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   5-Add ScriptManager Contol to your aspx file then reference the Web service by adding an asp:ServiceReference child element to the ScriptManager control and setting its path attribute to point to the Web service, That generate a JavaScript proxy class for calling the specified Web service from client script.   <asp:ScriptManager runat="server" ID="scriptManager"> <Services> <asp:ServiceReference Path="WebService.asmx" /> </Services> </asp:ScriptManager> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Basically ,to enable your application to call Web services(.asmx files) by using client script, the server asynchronous communication layer automatically generates JavaScript proxy classes. A proxy class is generated for each Web service for which an <asp:ServiceReference> element is included under the <asp:ScriptManager> control in the page.   6-Create new button to call the JavaSciprt function and a label to display the returned value . <input id="btnCallDateTime" type="button" value="Call Web Service" onclick="CallDateTime()"/> <asp:Label ID="lblOutupt" runat="server" Text="Label"></asp:Label> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   7-Define the JavaScript code to call the Web Service : <script language="javascript" type="text/javascript">   function CallDateTime() {   WebService.OurServerOutput(OnSucceeded); }   function OnSucceeded(result) { var lblOutput = document.getElementById("lblOutupt"); lblOutput.innerHTML = result; } </script> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } CallDateTime function calls the Web Service Method OurServerOutput… OnSucceeded function Used as the callback function that processes the Web Service return value. which the result parameter is a simple parameter contain the Server Date Time value returned from the Web Service . Finally , when you complete these steps and run your application you can press the button and retrieve Server Date time without postback.   Conclusion: In this topic I describes how to access Web services from client script in AJAX-enabled ASP.NET Web pages With a full .NET Framework/JSON serialize, direct integration with the familiar .asmx Web services ,Using  simple example,Also you can connect with the database to return value by create WebMethod in your Web Service file and the same steps you can use. Next time I will show you more complex example which returns a complex type like objects.   Hope this help.

    Read the article

  • OpenVPN not connecting

    - by LandArch
    There have been a number of post similar to this, but none seem to satisfy my need. Plus I am a Ubuntu newbie. I followed this tutorial to completely set up OpenVPN on Ubuntu 12.04 server. Here is my server.conf file ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) local 192.168.13.8 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? proto tcp ;proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "/etc/openvpn/ca.crt" cert "/etc/openvpn/server.crt" key "/etc/openvpn/server.key" # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. ;server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. server-bridge 192.168.13.101 255.255.255.0 192.168.13.105 192.168.13.200 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.13.1 255.255.255.0" push "dhcp-option DNS 192.168.13.201" push "dhcp-option DOMAIN blahblah.dyndns-wiki.com" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. user nobody group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I am using Windows 7 as the Client and set that up accordingly using the OpenVPN GUI. That conf file is as follows: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. blahblah.dyndns-wiki.com 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) user nobody group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\OpenVPN\config\\ca.crt" cert "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.crt" key "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Not sure whats left to do.

    Read the article

  • Project Server 2007 install issue - ProjectEventService won't start

    - by Brian Meinertz
    Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

    Read the article

  • SQLAuthority News – Guest Post – FAULT Contract in WCF with Learning Video

    - by pinaldave
    This is guest post by one of my very good friends and .NET MVP, Dhananjay Kumar. The very first impression one gets when they meet him is his politeness. He is an extremely nice person, but has superlative knowledge in .NET and is truly helpful to all of us. Objective: This article will give a basic introduction on: How to handle Exception at service side? How to use Fault contract at Service side? How to handle Service Exception at client side? A Few Points about Exception at Service Exception is technology-specific. Exception should not be shared beyond service boundary. Since Exception is technology-specific, it cannot be propagated to other clients. Exception is of many types. CLR Exception Windows32 Exception Runtime Exception at service C++ Exception Exception is very much native to the technology in which service is made. Exception must be converted from technology-specific information to natural information that can be communicated to the client. SOAP Fault FaultException<T> Service should throw FaultException<T>, instead of the usual CLR exception. FaultException<T> is a specialization of Fault Exception. Any client that programs against FaultException can handle the Exception thrown by FaultException<T>. The type parameter T conveys the error detail. T can be of any type like Exception, CLR Type or any type that can be serialized. T can be of type Data contract. T is a generic parameter that conveys the error details. You can read complete article http://dhananjaykumar.net/2010/05/23/fault-contract-in-wcf-with-learning-video/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

    - by DragonLord
    One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

    Read the article

  • Project Server 2007 install issue - ProjectEventService won't start

    - by Brian Meinertz
    Trying to install PS2007 with SP1 on Server 2003. The install goes fine, but when running the SharePoint Configuration Wizard, it fails at stage 6 of 12 with the error: Failed to register SharePoint Services. An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service ProjectEventService on computer '.'. From the PSCDiagnostics log: Exception: System.InvalidOperationException: Cannot start service ProjectEventService on computer '.'. --- System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion. The ProjectEventService (Microsoft Office Project Server Event) won't even start manually using the Network Service account. Starting the service with a domain account works, but subsequently running the Config Wizard causes the service to be removed and re-provisioned to run using the Network Service account, which again fails. Presumably Network Service needs elevated permissions, but even adding it to the local Admin group makes no difference. Anyone come across this sort of issue before?

    Read the article

  • httpd not starting with systemd on F17

    - by malfy
    Title says it all. This is a fresh Fedora 17 system running on a Xen hypervisor. No idea why it won't start [root@box~]  uname -a Linux box.localhost 3.5.4-2.fc17.i686.PAE #1 SMP Wed Sep 26 22:10:23 UTC 2012 i686 i686 i386 GNU/Linux [root@box~]  cat /etc/redhat-release Fedora release 17 (Beefy Miracle) [root@box~]  systemctl enable httpd.service ln -s '/usr/lib/systemd/system/httpd.service' '/etc/systemd/system/multi-user.target.wants/httpd.service' [root@box~]  systemctl start httpd.service Job failed. See system journal and 'systemctl status' for details. [root@box~]  systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: failed (Result: exit-code) since Fri, 19 Oct 2012 22:43:37 -0500; 3s ago Process: 18225 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=226/NAMESPACE) CGroup: name=systemd:/system/httpd.service Oct 19 22:43:37 box.localhost systemd[18225]: Failed at step NAMESPACE spawning /usr/sbin/httpd: No such file or directory [root@box~]  ls -al /usr/sbin/httpd -rwxr-xr-x 1 root root 343496 Apr 30 04:56 /usr/sbin/httpd

    Read the article

  • Can / should I prevent my domain controller doing forward lookups for remote users?

    - by markmnl
    I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do a nslookup or simply browse the web my VPN's DNS (the office's Windows Server) provides the DNS answers - I beleive becuase it has DNS forwarders so queries it cant answer it forwards and then relays the answer. This is the desired behaviour for workstations in the office (they should query their domain controller first). However for remote VPN users this is not desirable - I do not want my remote office's server to answer DNS queries it is not the authority of (which happends to be 192.168.x.x). Is there any way I can configure this?

    Read the article

  • No endpoint listening at.........

    - by Michael Stephenson
    I was having some very frustrating behaviour on our build server and while I found a number of articles online with similar error messages none of them helped me.  I thought I would just explain this here incase if helps me or anyone else in future.The error message we were getting is:There was no endpoint listening at http://localhostStubs.ExternalApplication/SampleService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more detailsOur scenario is as follows:We have a solution where a WCF service application hosting the WCF routing service is listening to the Windows Azure Service Bus Relay.  We have an acceptance test project in the solution which sends a message to the service bus which is then received by the WCF routing service and routed to SampleService.svc which is hosted in another IIS application on the same box.  A response is flowed back through to the test.  In the tests there are 5 scenarios simulating a successful message, and various error conditions.  On my developer machine it was working absolutely fine every time, and a clean build on my developer machine worked fine.  On the build server however one or more of the tests would fail each time with the above error message.  There didnt seem to be any pattern to which test would fail.The solution was building on a Windows 2008 R2 machine with IIS 7 and AppFabric Server installed with auto-start configured for the IIS Application which would be listening to service bus.After lots of searching online and looking at logs etc it turned out to be a simple solution to just restart the WAS service (Windows Process Activation Service) and the services it advised you to restart with it.  Hope this helps someone else

    Read the article

  • OpenVPN not with Windows 7 PCs on client Lan

    - by Rohan
    I have a setup with a router running OpenWRT with an openvpn client. Windows 7 pc's cannot access the vpn. They time out trying to access servers on the VPN. The mystery to me is that the setup works fine for my laptop running ubuntu. I can access the VPN without any issues. I previously had a router running Tomato with the same openvpn setup and all the computers could access the VPN. What could account for the difference in behaviour? Is there something I am missing in the OpenWRT setup that is required for windows networking that is on by default with tomato? To clarify the OpenVPN client is on the OpenWRT router. The client connects to the OpenVPN server. But when I try to access the VPN from Windows computers on my network I cannot.

    Read the article

  • How can I prevent my domain controller doing forward lookups for remote users?

    - by markmnl
    I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do an nslookup or simply browse the web the DNS from the VPN provides the DNS answers. I believe this is because it has DNS forwarders, so queries it can't answer are forwarded and then it relays the answer. This is the desired behavior for workstations in the office (they should query their domain controller first); however for remote VPN users this is not desirable. I do not want my remote office's server to answer DNS queries it is not the authority of (which happens to be 192.168.x.x). Is there any way I can configure this?

    Read the article

  • Service Unavailable - App Pool disabled error...anyone know why?

    - by andy
    Hi guys A small number of our sites intermediately experience an error that is a mystery to us. Our set up is: Windows Server 2003 IIS6 .NET 3.5 We have about 35 Websites running on IIS Each site has it's own App Pool Each App Pool has the identity: Network Service The symptom is: The Application Pool for a site stops, and when you browse to the site, you only see: SERVICE UNAVAILABLE In the Event Logs, we have one Error, that looks like this: Application pool 'AppPool1' is being automatically disabled due to a series of failures in the process(es) serving that application pool. And we have several Warnings leading up to the error, that look like this (note: the warnings look the same, except for the process id): A process serving application pool 'AppPool1' suffered a fatal communication error with the World Wide Web Publishing Service. The process id was '292'. The data field contains the error number. What's causing this? As I said, it doeasn't happen very often....the last time was about 6 months ago...and it usually happens with the same site/App pool. Any ideas? cheers!

    Read the article

  • OpenVPN server behind firewall issues

    - by Gabriel
    I'm trying to setup an OpenVPN but I do have some problems doing it. This is my scenario: INTERNET --- HOME ROUTER (10.1.0.0/28) --- FIREWALL SERVER (DEFAULT GATEWAY FOR MY INTERNAL LAN 10.1.0.2) --- OpenVPN Server (10.1.0.9 LAN | 10.2.0.1 VPN) single nic / bridge iface I can connect to my VPN server successfully (it gets the 10.2.0.5 address). Though, I'm not able to ping anything, neither my VPN server, nor my lan clients. I guess the problem is on the firewall. I'm not really an expert on iptables, I tried adding plenty of different rules without success. I would appreciate a lot if someone could explain me how to get to work the VPN server in this scenario. After connecting through VPN, when I try to ping the server, I'm not really sure about how the ping message gets to the server and how the response should go back to the client. Thanks a lot Gabriel

    Read the article

  • Architecture design with MyBatis mappers

    - by Wolf
    I am creating rest web service for providing data. I am using Spring MVC for handling rest requests, and MyBatis for data access. Application should be designed in the way that it should be easy to change the data access implementation (for example to hibernate or something else) and it has to be fast (so I am trying to avoid unnecessary overcomplication of design). Now my question is about the general design of layers. I would normally use DAO interface and then different implementations for different data access strategies, but MyBatis uses interfaces to access the data. So I can think of 2 possible models but I am not sure which one is better or if there is any other nice way: Controller layer - uses Service layer interfaces services are then implemented for each data access stretegy - for example for mybatis: service implementation uses Mapper classes to access data and do whatever it needs to do with them and sends them to controller layer Controller layer - uses Service layer - service layer uses DAO interfaces DAOs are then implemented for each data access strategy - for example for mybatis: DAO class uses mapper interface to access data and sends them to service layer, service layer then do whatever it needs to do with them and sends them to controller layer I prefer the first strategy as it seems to be less complicated, but then I would have to write all of the service code for another data access again. What do you think? Thank You

    Read the article

  • Check for Apache state in Linux

    - by loulouzekiller
    Hi i have a java application that starts/stops/restart Apache and it should also check for its status, so i have looked how checking for status of apache and it appears that you have to check for the state of the service, problem is that when i use apachectl start the service httpd is still not started, is that normal ? i check for the service state by doing service httpd status . [root@lxrdcpsm ~]# service httpd status httpd is stopped [root@lxrdcpsm ~]# /apps/apache/2.4.4/bin/apachectl start httpd (pid 20502) already running [root@lxrdcpsm ~]# service httpd status httpd is stopped [root@lxrdcpsm ~]# /apps/apache/2.4.4/bin/apachectl stop [root@lxrdcpsm ~]# service httpd status httpd is stopped [root@lxrdcpsm ~]# /apps/apache/2.4.4/bin/apachectl start [root@lxrdcpsm ~]# service httpd status httpd is stopped [root@lxrdcpsm ~]#

    Read the article

  • OpenVpn is working but no internet connection

    - by user3636476
    I'm using an OpenVpn connection in Ubuntu, it's working well but when I'm using it, my internet connection is not working. I edited my connections in network manager, I've been to the VPN tab, and edited the VPN configuration. In the IPv4 Settings tab, I clicked in the bottom right button "Routes" and I ticked "Use this connection only for resources on its network". When I'm doing this the internet access is working but the vpn is not any help please?

    Read the article

  • A Generic RIDC Test Program

    - by Kevin Smith
    Many times I have found it useful to use a java program that communicates with WebCenter Content (WCC) using RIDC for testing. I might not have access to the web GUI or need to test a service running as a specific user. In the past I had created a number of "one off" programs that submitted specific services, e.g GET_SEARCH_RESULTS, DOCINFO, etc. Recently I decided to create a generic RIDC test program that could submit any service with the desired parameters based on a configuration file. The programs gets the following information from the configuration file: WCC connection information (host, port) User to use to run service Service to run Any parameters for the service The program will make a connection to the WCC server, send the service request, and print the results of the service call using the getResponseAsString() method. Here is a sample configuration file: ridc.host=localhostridc.port=4444ridc.user=sysadminridc.idcservice=GET_SEARCH_RESULTSidcservice.QueryText=dDocType <matches> `Document`idcservice.SortField=dDocNameidcservice.SortDesc=ASC There is a readme file included in the zip with instructions for how to configure and run the program. The program takes one command line argument, the configuration file name. The configuration file name is optional and defaults to config.properties. If you have any suggestions for improvements let me know. Right now it only submits a single service call each time you run it. One enhancement I have already thought about would be to allow you to specify multiple services to tun in the configuration file. You can do that with the current program by having multiple configuration files and running the program multiple times, each with a different configuration file. You can download the program here.

    Read the article

  • Nagios check_bgp_neighbors plugin showing critical status

    - by user141610
    I am trying to configure nagios check_bgp_neighbors plug-in on Ubuntu and followed README file of check_bgp_neighbors plug-in. I have made following changes: define command{ command_name check_bgp_all command_line $USER1$/check_bgp_neighbors -H $HOSTADDRESS$ -C $USER3$ -n $ARG1$ -n $ARG2$ } to define command{ command_name check_bgp_all command_line /usr/local/nagios/libexec/check_bgp_neighbors.sh -H xx.xx.xx.49 -C snmpName -n xx.xx.xx.50 And define service{ use server-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!10.0.0.1!172.16.0.2 } to define service{ use generic-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!xx.xx.xx.50 } xx.xx.xx.49 is the IP of the host router and xx.xx.xx.50 is the IP of eBGP neighbour. Status information: line: neighbor:xx.xx.xx.50:sent:78838:received:9769 Failed: status:6 prefixes:16 sent:0 received:1 Log [1353997904] SERVICE NOTIFICATION: router1;router1;BGP CHECK 2;CRITICAL;notify-service-by-email;line: neighbor:103.7.248.50:sent:78842:received:9772 [1353997904] SERVICE NOTIFICATION: router1;router1;BGP CHECK 2;CRITICAL;notify-service-by-sms;line: neighbor:103.7.248.50:sent:78842:received:9772 Why does it show critical status???? I am not getting response for this question, if you need additional information please mention it in comment.

    Read the article

  • Very Cool &ndash; Miami 311 System for tracking citizen service requests (Windows Azure, Silverlight

    - by Jim Duffy
    Having grown up in South Florida this short, but very enlightening, video explaining how the City of Miami has implemented a 311 citizen service request system using Windows Azure, Silverlight and Bing Maps definitely caught my attention. Miami311 The Miami311 System is a Windows Azure/Silverlight-based solution which enables City of Miami citizens report and track issues reported to city management. The system uses Bing Maps to plot the location and relevant information about each issue reported. Citizens now have the ability to easily see the status of the issue without having to call the city office. What I found interesting were a couple of benefits that a metropolitan area such as Miami can take advantage of in Windows Azure cloud-based solution. For the city of Miami, both benefits center around the weather. Of course the threat of a hurricane is a real issue in South Florida and what better way to make sure your site stays up during a hurricane then to have the site hosted far away from the eye of the storm. Using a Windows Azure cloud-based architecture the City of Miami is able to host the application within the Microsoft data centers safely away from any hurricane passing through South Florida. The second benefit is the inherent scalability of a Windows Azure based solution. During a severe weather event like thunderstorms or even worse, a hurricane, downed trees and power lines are a commonly reported problem. Being able to quickly scale up the computing resources required to handle the spike in citizens reporting these types of problems on the site is a huge benefit. Once the weather event has passed and downed tree reports begin to subside they can quickly reverse the process and scale the system back down to pre-storm levels. It’s kind of day-to-day kind of stuff but very cool stuff nonetheless. Have a day. :-|

    Read the article

  • What scenarios are implementations of Object Management Group (OMG) Data Distribution Service best suited for?

    - by mindcrime
    I've always been a big fan of asynchronous messaging and pub/sub implementations, but coming from a Java background, I'm most familiar with using JMS based messaging systems, such as JBoss MQ, HornetQ, ActiveMQ, OpenMQ, etc. I've also loosely followed the discussion of AMQP. But I recently became aware of the Data Distribution Service Specification from the Object Management Group, and found there are a couple of open-source implementations: OpenSplice OpenDDS It sounds like this stuff is focused on the kind of high-volume scenarios one tends to associate with financial trading exchanges and what-not. My current interest is more along the lines of notifications related to activity stream processing (think Twitter / Facebook) and am wondering if the DDS servers are worth looking into further. Could anyone who has practical experience with this technology, and/or a deep understanding of it, comment on how useful it is, and what scenarios it is best suited for? How does it stack up against more "traditional" JMS servers, and/or AMQP (or even STOMP or OpenWire, etc?) Edit: FWIW, I found some information at this StackOverflow thread. Not a complete answer, but anybody else finding this question might also find that thread useful, hence the added link.

    Read the article

  • Software to monitor bill payment to mission critical IT service providers (ISP, DNS etc.)

    - by Sholom
    Hi All, The Problem: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >