Search Results

Search found 19033 results on 762 pages for 'blank screen'.

Page 208/762 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• Getting "boot error" when trying to boot from USB

  - by Jon Ball

  I'm wanting to try out Ubuntu, so followed the instructions for how to install Ubuntu onto a USB. I downloaded the .iso file, then the pendrivelinux 3 part process to make the USB bootable. I can see what looks like a full list of files on the USB (including the wubi.exe application and the syslinux folder). When I try to restart the computer with the USB in, I get the Dell start up screen, and then a black screen with "Boot Error" in the top right hand corner. Setup options (default) are to boot from Removable Device, then Hard Disc. USB is brand new, straight out of the packet. Computer: Dell Inspiron 530S BIOS: 1.0.13 OS: Windows Vista Home Edition USB: EMTEC 8Gb, formatted to FAT32 I've tried some of the tips in other help topics (holding down CTRL key while restarting, removing all other USB devices). I tried to reformat the USB to something other than FAT32, but my only other options were NTFS or exFAT (not FAT16 which was suggested in another topic).

  Read the article

• Which ATI driver version did 10.04 use?

  - by Jack

  I have a trouble with ATI driver with Ubuntu 12.04 LTS. When I install ATI driver in Ubuntu 12.04 via "Additional Driver", then I can't shutdown Ubuntu, it showed blank (black) screen and my laptop still run. Sometimes, my screen like that: http://www.youtube.com/watch?v=U9_iygesbBM But when I install Ubuntu 10.04 and install ATI driver via "Additional Driver", it's very good and no trouble I've seen. It's sweet but 10.04 is old and is supported to 4/2013. So I want to know why Ubuntu 10.04 works good better than 12.04 with ATI driver (in my case)?

  Read the article

• How do I stop stretching during window re-size in XNA?

  - by Bradley Uffner

  In my windowed mode XNA game when the user resizes the window the game stops updating the window and the last frame drawn is stretched and distorted until the user releases the mouse and the resize completes. Is there any way to have the game continue to run "normally", updating frames and redrawing the screen, during the resize event? I realize that keeping the render loop going while resizing may not be possible or recommended due do hardware managed resources getting continually created and destroyed, but is there any way to stop the ugly stretching? Ideally by leaving the existing frame unscaled in the top left, or with a black screen if that isn't possible.

  Read the article

• Upgrade from 10.10 to 11:04 to 11.10. X starts, Unity desktop not there

  - by Stefan Lasiewski

  I upgraded my Ubuntu Desktop 10.10 system to 11.04 and then 11.10. Now, when I start Ubuntu, the Unity desktop doesn't start correctly. Here's what I do: Start computer I log in via the GUI login screen The X Window System starts. I can see an arrow icon for the mouse, and can move it around the screen. Nothing else starts. There are no desktop icons, no launcher, no taskbar, etc. Right clicking on desktop does nothing. I've tried some common keyboard shortcuts ("Alt-tab" "Ctrl-Alt-T" "Ctrl-Alt-Backspace") but nothing happens. If I go to another Virtual Console, and run the command unity, the Unity desktop will start on my primary X desktop. However I'm seeing many problems like windows which are only half-drawn, some applications run without the familiar "Minimize, Maximize, Close" What's happening here? It seems that the X Window System started, but Unity did not start? How can I debug this?

  Read the article

• Cannot sleep/standby in Ubuntu 12.04

  - by mstaessen

  Yesterday, I installed Ubuntu 12.04 Desktop i386 on my netbook (HP Mini 311c). I am unable to use the sleep mode. When I press the suspend button (or do sudo pm-suspend), the screen flickers but the computer does not power off. Even worse, the screen comes back up and I'm back where I left off. Hibernating does work (although it is not available in Power Management). I have to use pm-hibernate to make that work. I'm using the 3.2.0.20 kernel and Gnome 3.3.92 (Unity, especially compiz, is a resource hog). Before Ubuntu 12.04, I was using Mint Linux 12 with the 3.0 kernel and everything worked fine back then. Any help is much appreciated because this is driving me crazy.

  Read the article

• OpenGL ES, orthopgraphics projection and viewport

  - by DarkDeny

  I want to make some simple 2D game on iOS to familiarize myself with OpenGL ES. I started with Ray Wenderlich tutorial (How To Create A Simple 2D iPhone Game with OpenGL ES 2.0 and GLKit). That tutorial is quite good, but I miss some parts of a puzzle. Ray creates orthographic projection using some magic numbers like 480 and 320. It is not clear to me why did he take these numbers, and as far as I can see - sprite is not mapped to the ipad simulator screen one-to-one pixel. I tried to play with parameters with which ortho matrix is created, but I cannot figure out what math is here. How can I calculate numbers (bottom, top, left, right, close, far) which will be parameters to orthographic projection matrix creation and have sprite on the screen shown in its original size?

  Read the article

• Set a drawing viewport while using camera

  - by Mariano

  I'm working with XNA. I already have a basic world made of tiles and a camera using a transform matrix. I have a character moving around and the camera follows. What I want to do now is draw the map only on a certain part of the screen as shown on the figure below. This way I can move the map to the left of the screen and have the other fixed parts shift to the right. Do I need to modify the camera matrix? Make a new viewport?

  Read the article

• Boot-up hangs unless I manually select the kernel in the bootloader

  - by The Photon

  In my stock Ubuntu install (forgot which critter its named for, about one year old), I am able to boot up normally only if I manually select the kernel in the bootloader (Grub). If I step away and it boots from the default, the system will hang with the word "Ubuntu" on a graphics screen and a few white/red blinking dots beneath it. umb@digdug:~$ uname -a Linux digdug 2.6.32-42-generic #95-Ubuntu SMP Wed Jul 25 15:57:54 UTC 2012 i686 GNU/Linux Synaptics says I have 'grub-pc' version 1.98-1ubuntu-13 installed. My grub.cfg does have default="0" which I would expect to make the default be the first kernel shown in the selection screen. The system is a laptop with an i7 processor, and I have had trouble with some kernels not being able to boot at all in the past, and power management is not working perfectly, but I have not had problems booting the latest kernel (2.6.32-42) if I select it manually in Grub. Any idea what is going on here and how can I fix it so that I can re-boot unattended?

  Read the article

• Which ATI driver version Ubuntu 10.04 LTS used?

  - by Jack

  I have a trouble with ATI driver with Ubuntu 12.04 LTS. When I install ATI driver in Ubuntu 12.04 via "Additional Driver", then I can't shutdown Ubuntu, it showed blank (black) screen and my laptop still run. Sometimes, my screen like that: http://www.youtube.com/watch?v=U9_iygesbBM But when I install Ubuntu 10.04 and install ATI driver via "Additional Driver", it's very good and no trouble I've seen. It's sweet but 10.04 is old and is supported to 4/2013. So I want to know why Ubuntu 10.04 works good better than 12.04 with ATI driver (in my case)?

  Read the article

• Wubi 12.04 boot error message

  - by Leandro

  Im having a boot problem with my Wubi 12.04 system. When Ubuntu starts to boot up, a message will appear in my screen and it's something like: T#s..... does not exist Sorry, I couldn't read all the message. Then another message pop-out after Ubuntu loading screen this time the message is this: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -check rootdelay= (did the system wait long enough?) -check root= (did the system wait for the right device?) -missing module (cat /proc/module: ls /dev) ALERT! /dev/disk/by/by_uuid/EODC2345DC231576 does not exist. Dropping to a shell

  Read the article

• Ubuntu desktop and dash problems

  - by user170163

  I am not sure if i have posted it to right place, so if no please don't judge me, I am a newbie. I installed Ubuntu 13.04 and I am happy with it. I have two OS's in dual boot. Ubuntu and Windows 7. in Ubuntu I have 2 problems. The first one is when I suspend my system I cannot resume it again. It sometimes show me the password screen (user names and etc. (sorry i don't know the exact name of it)) and sometimes just a blank screen. what can be the problem? The second one is this: When I hit ALT+F2 it looks like this ( but not always. when I restart the system everything is OK till about 30-40 minutes. and then it looks like this. Please help, I really like Ubuntu but these 2 problems ruin my plans about it. Thanks

  Read the article

• SQL Auto Close Options

  - by Dave Noderer

  Found an interesting thing that others have run across but it is the first time I’ve seen it. A customer emailed to say that the SQL 2008 db that I had helped him with seemed to be going into recovery mode on a regular basis while watching the SQL Management Studio screen. Needless to say he was a bit nervous and about to take some drastic steps. Eventually he found that the Auto Close option was set to true. When this is set to true, the database automatically closes all connections and unlocks the mdf file after 300 milliseconds. When a new connection is made it spins backup… Great for xcopy deployment on a client machine but not a multi-user server based application. So the warning… if you have started a database with SQL express and then move it to a production SQL server, make sure you check that the Auto Close option is set to false. See options screen below:

  Read the article

• Question about JPanel "transition" for Java Swing

  - by user16778

  I want to make like a sort of main menu (in GUI). When the user clicks the start button, the screen transition into another "screen" (JPanel). This image will make it easier to understand. http://i.imgur.com/Cfdry.png Currently, I have a MainMenu extends JPanel and that gets added into a driver class with a JFrame. I can't figure how to switch to another class like Game extends JPanel. So when the user clicks the start button in MainMenu, I want it to somehow hide itself and the Game to show itself. Thanks.

  Read the article

• Cannot login to newly created user account

  - by penner

  Trying to switch accounts to my newly created account I get a black screen and then it takes me back to the main login screen after entering the correct password. Upon logging into my previously existing account I get: "System Program Problem Detected" Details: Executable path /usr/bin/Xorg Package: xserver-xorg-core 2:1.11.4-0ubuntu10.1 Details: Crash ... (tons more, but no way to copy paste or save) When I try to su su -l penner I get: No directory, logging in with HOME=/ I manually created the home directory and this error goes away but still no luck with the login. Seems something has gone wrong with the user creation? How can I correct this?

  Read the article

• how to launch grub menu for ubuntu guests in virtualbox?

  - by Ubuntuser

  I have ubuntu 12.04 alpha installed in virtualbox. When the virtual machine is started, it boots directly to the login screen without showing the grub menu. How can I get the grub menu to show up on start? Please note: the graphics is broken after recent updates, so i cannot login and make the changes. it is stuck at the screen "Ubuntu is running on low graphics mode" and the mouse and other keys do not work. [URL=http://img862.imageshack.us/i/screenshotat20120127171.png/][IMG]http://img862.imageshack.us/img862/9783/screenshotat20120127171.th.png[/IMG][/URL]

  Read the article

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Java and web pages

  - by Filippo

  Hello everyone and thank you in advance for the answers. I have a question concerning not how to do something, but with which instruments. Let's say, I want to write a simple application in Java that connects to a news website (e.g. CNN), parses the html document and prints on screen the news. Another example : my application retrieves and prints on screen soccer results from Eurosports. What do I need to do that? External libraries? Or maybe what I'm looking for is already included in JavaEE? Could this be helpful? http://jsoup.org/<< Thank you everyone again and have a nice day.

  Read the article

• Ubuntu Hangs Suddenly (Dell Latitude E5530)

  - by iFadey

  I recently bought (a month ago) Dell Latitude E5530 which comes pre-installed with Ubuntu 11.10. I removed Ubuntu 11.10 and installed 12.04 LTS right after the purchase. Everything worked out of box but occasionally Ubuntu completely hangs. The screen freezes and I can't even switch to other terminals by pressing (CTRL+ALT+F*). Whenever the screen freezes, CPU fan speed also increases. This is not happening when running particular applications. I mean it can hang without giving any reason or error displayed and while running any application. In short currently I can't able to reproduce system hang myself. I also want to mention that sometimes it never hangs complete day. Here are the specs of my laptop: Processor: Core i7-3520M CPU @ 2.90GHz Memory: 8GB HDD: 500GB, 7200rpm (Model=ST9500423AS) Graphics: Intel HD 4000 Operating System: Ubuntu 12.04 LTS (64-bit) Thanks!

  Read the article

• openGL Camera setup for Zoom in/out centered at point under cursor

  - by user3228921

  I am trying to implement a zoom in/out navigation mode in a openGL 3dViewer. I was able to implement zoom functionality centered at screen center just by moving eye towards the center in perspective mode. Now i am trying to do the zoom centered at arbitrary position under the cursor. I am unable to figure out how should i move my camera forward and backward such that point under cursor remains at the same screen coordinates after zoom in/out. Any help would be appreciated. Below are the images which show the desired effect. Just to mention, I am working in a perspective mode with eye target and up vectors to control camera. Same effect i found in google sketchup and 'zoom to mouse position' setting in blender.

  Read the article

• How do you get the total asset size (or total resource size) in an Android game?

  - by tom_mai78101

  In an Android Java project, there are two folders, asset and res. To me, I usually put some stuffs, like PNG files, sound files, etc. in either one of the two folder. When resources are increasingly becoming more and more in those folders, the time it takes to load them will increase. Therefore, a loading screen is a must in these situation. The total size is to be used in a loading screen, so that I can guess the average time it takes to load each resources, from 0 bytes to its individual resource file size. I only know that by adding all individual sizes in a respective order, I will then obtain the total asset or res folder size, simply by adding them up. So, when it comes to getting the total file size from either folder, how do you obtain their individual resource/object sizes, respectively? Thanks in advance.

  Read the article

• Technique to Display Multiple Browser Windows Tiled at Same time?

  - by Kendor

  I have a separate monitor that I use for Toodledo (a web-based task managment app), in which I like to display various views (Next Action Status, Waiting Status, Planning Status, and Overdue Due-Date items). I've been playing around with some add-ons on Firefox that allow you to split the browser, but they are cumbersome. I'm now trying Chrome, and opening 4 different browser windows that I've tiled on the screen in quadrants (I use the Compiz grid applet for this). This is not ideal as each browser replicates the URL bar and the tab, and I don't have opening ths windows automated upon restart. Chrome is great in managing screen real estate, but this is not ideal. In Firefox I tried various extension to hide interface elements, but it was very clunky... Am wondering whether anyyone has tried to do similar with TD, and how they achieved what I'm going after? Am wondering whether someone has a good technique for accomplishing what I'm looking for?

  Read the article

• How should I sort images in an isometric game so that they appear in the correct order?

  - by Andrew

  Hi! This seems like a rather simple problem but I am having a lot of difficulty with it. What should I do to properly sort images in an isometric game? In a normal 2d top-down game one could use the screen y axis to sort the images. In this example the trees are properly sorted but the isometric walls are not. Example image: sorted by screen y Wall2 is one pixel below wall1 therefore it is drawn after wall1. If I sort by the isometric y axis the walls appear in the correct order but the trees do not. Example image: sorted by isometric y

  Read the article

• Display launcher over a GNOME panel (instead of under)

  - by Greg Treleaven

  I've set up my desktop so that I have a classic style gnome-panel at the bottom to show my active applications with a main menu button on the side. The problem is that the panel stretches across the whole width of the screen and over the launcher, making it difficult to access the icons at the bottom. I could untick the expand option in the panel's properties, but there's no way to resize it so it takes up the rest of the right part of the screen, which is what I want. And if enough applications are open it stretches all the way anyway. I don't want to auto-hide it either. What I'd like to do is make the launcher go over the top of the panel so I can fully access both the launcher and the panel at the same time. If it's possible, how do I do this?

  Read the article

• Dual boot problem - Ubuntu windows 7

  - by Benoit Roberge

  I've been using Ubuntu for a while on my laptop. Recently, I decided to install Ubuntu on my main desktop PC (dual boot with windows 7). I downloaded the Ubuntu installer for windows and installed it (it's now showing Ubuntu in the installed software in my W7 control panel). However, when I tried to boot Ubuntu, after the boot loader and the login screen, my screen splitted in half. I was not able to see the icons and the launcher. I was also not able to do anything. I uninstalled Ubuntu and tried again twice. Same thing/results. Then, I created a partition in W7 and installed Ubuntu on it. Unfortunately, it's doing the same thing. I never saw something like this. Any idea??? Thanks for your help and support.

  Read the article

• Xubuntu keeps loading on install with usb stick

  - by mattyh88

  I'm trying to install Xubuntu on my computer. I've followed a guide to create a USB bootable drive. I've inserted the USB stick and started the computer. I can see Xubuntu loading and after a minute or 2 it shows me a screen asking me if I'd like to use the live version or if I'd like to install. I choose install. Then on the next screen I select English as language. When I click continue, Xubuntu just keeps loading. It doesn't really freeze as I can still quit and move the cursor. When I clicked quit, I see the live version and all is working just fine. I can browse the internet, etc. What could be wrong?

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >