Search Results

Search found 8821 results on 353 pages for 'core duo'.

Page 208/353 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• Why does my CPU Usage reach 100% too often?

  - by deathlock

  I'm using a dual-core processor and often see my CPU usage reaches 100%. I realize this may happen if I'm running too much applications, so when I know the computer starts to run slowly, I start to close my applications. I usually run 4-5 applications simultaneously. Usually those are: web browser (Google Chrome), Adobe Photoshop, Notepad++, XAMPP, and Windows Task Manager. Usually I close tabs in my Chrome first, because I often browse the net with about 20 tabs/4 windows open, so I presume that would take much memory (bad habit, I know). But even after closing Chrome's tabs or closing other applications, my CPU Usage often stays at high percentage - 72% at best, 100% at worst. I check the Processes tab on Windows Task Manager and usually found the System, System Idle Process, or services.exe taking the highest CPU process (could reach 60). Why is this happening? And is there any solution? EDIT I have T2250 @ 1,73 Ghz and 2.5 GB RAM

  Read the article

• Can I upgrade my computer to run SC2 smoothly?

  - by Citizen

  My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• How to lock the c prompt?

  - by allindal

  Is there anyway to lock the command prompt? I need my computer to require a password to use the command prompt. I lock the workstation occasionally but sometimes I forget and if I could just prevent my roommate from doing the "c: net user user *" to change my password it would be great. I do not want to have to use the rundll.32 user command with script to automatically lock the computer. Just a way to lock the c prompt. Sorry for not saying this earlier, I'm running a vista 32bit Asus gene II motherboard with a core i7 CPU

  Read the article

• What is the specific advantage of a blade server for virtualisation?

  - by ChrisZZ

  We are planning to implement a VDI Solution. We had some discussions about Blade vs Rack. As we are only planning to implement 75-100 Clients, we calculated, that we would need 2 Servers with Dual 8C Processors - and a shared storage server. This calculation is based on a paper by ORACLE, that says, 12 active virtual machines per core. Now, for buying to servers, a blade does not scale financially. But the Blade has some other advantages: a) The interconnectivity between the blades is super-fast. b) IO Virtualisation Are there other advantages, that we should consider, that would make up for price - and are this advantages so important, that we should think about investing in the blade?

  Read the article

• Concerns about a Dedicated (Windows Server 2008) + DDoS

  - by TheKillerDev

  I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

  Read the article

• How can I know I'm buying a heatsink that will work with my CPU?

  - by Mike Peshka

  Recently I've been using my CPU a lot more for gaming, and as of two days ago, my computer had just been shutting off suddenly with no warning. I'm inclined to believe I need a new heatsink and cooling fan system. (Correct me if I am wrong.) Now I went around to BestBuy and Staples to purchase a new one, but both places instructed me to look online. Now I am posed with a problem. I don't know how to shop for one online because I want to make sure it will work with my unit. My CPU is a Pentium® Dual-Core CPU E2210 @ 2. 20GHz

  Read the article

• ubuntu to ubuntu backup in internal network

  - by amirash

  hey, i got my development "home" server witch is ubuntu 10, i brought today a computer in order to make a backup to this computer (the development server does also to him self backups every day but im paranoaid so i want to have two backups just in case on diffrent computers) what is the best way to backup the system core of the development server (like norton ghost) & do a full & incrmnt backup of him to the new computer that ive brought? rsync? rdiff? scp? clonezilla?

  Read the article

• Why is Windows Explorer not responding?

  - by William Barnes

  I am having the seemingy popular problem with Widows Explorer not responding. I have tried the AUTRUNS and turned off everything recommended. I have run SCANNOW 3 times and it comes back clean. When booting in safe mode it appears to work. I read someplace that the problem could be a service program, but can't remember where I read it or how to do it. Something about turning off all service programs and then turning them back on one at a time. The problem is I don't remember what it said to do. Any and all help is greatly appreciated. as an FYI here is my system stats Sorry I can't access that part of control panel right now because windows explore not responding. I have an HPdesk top with a AMD quad core processor 1.8GB 1.5TB sata drives (a 1TB and a 500GB) Nvidia 8400 graphics card a 2mb internet connetion wireless 2 DBD R?W drives. Any help is greatly apprciated

  Read the article

• Arch Linux shows a blinking cursor instead of a booting installer

  - by fakedrake

  Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

  Read the article

• Looking for a laptop with a removable hard drive

  - by anno

  At the moment, I possess a Dell Inspiron 6400. Just removing two screws, I've made the drive removable (look here) and I can pull it off in one second. The new Inspiron and Studio laptops don't support this anymore (the drive is no more on the side but on the back of the laptop). So I’m looking for a new laptop having this kind of feature, or one that can be modded easily. I also need a : Screen = 15" (if possible resolution 1366 x 768 resolution) Core i5-520M Midrange GPU (like an ATI Mobility Radeon HD 5650) Decent battery life minimum fan noise Thanks.

  Read the article

• Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

  - by Colm

  I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

  Read the article

• HP ML150 G6 upgrading RAM/CPU beyond specs?

  - by Morten Green Hermansen

  I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that guaranties me that this server will be able to be upgraded to 384GB RAM (using 32GB memory modules and 2 CPUs) http://www.compuram.de/en/memory,HP+%28-Compaq%29,Server,Proliant,ML150+G6.htm Can this really be true? The server that I have is using E5504 CPUs but will I be able to upgrade to any CPU that is using a LGA1366 socket? All from a low wattage L5640 all the way to the 6 core, high wattage versions like an X5650? (If cooling and power is adequate ofcause). Is there any limitation with powerregulators and chipset (Intel 5500). I am looking forward to any reply. Thanks in advance and best regards, - Morten Green Hermansen, Fanitas

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

• how to stop powershell mangling command line options for program executed from shell?

  - by kem

  From the powershell prompt, when I try to run a program and feed it a command line option, powershell ends up mangling the option. Why does this happen? Is there any way to stop it besides enclosing the option in quotes? For example, from the powershell prompt: PS Microsoft.PowerShell.Core\FileSystem::\\mach\share .\myprog.exe -file=input.txt myprog.exe ends up getting two arguments: 1) -file=input 2) .txt I need to run it like: .\myprog.exe "-file=input.txt" or .\myprog.exe '-file=input.txt' to force it to be one argument. No other shell does this.

  Read the article

• Setting up 2 external monitors on a laptop with VGA splitter

  - by mike

  I have a laptop with a graphics card that supports 2 displays. I would like to know the easiest way to set it up so I can close my laptop lid and use 2 external monitors (unique displays). I use it primarily for office applications and video and want a quality, clear picture. The laptop has 1 VGA port and I have 2 24" 1920x1200 monitors that have VGA and DVI ports. So a few questions: Can I just use a VGA splitter? (seen mixed feedback on this) Would it a VGA to 2 DVI splitter give a better picture quality? (if it exists) Would I be better upgrading laptop to one with 2 digital ports ( I just see a lot with VGA and HDMI though) specs: Model: Toshiba Satellite C675-S106 (Windows 7) Graphics Card: Intel HD Graphics 3000 (supports 2 displays) Processor: Intel Core i3-2350M

  Read the article

• Strange sound from Laptop, Microphone, Speakers or Soundcard?

  - by David Schilling

  I have recently purchased a second hand computer. There didn't seem to be anything wrong with it on purchasing, however recently I have noticed a small issue. Any time I play sound or listen through my headphones, I can hear what seems to be the CPU working (ie when beginning a new task, there is a small crackling). Also if I tap my laptop I can hear the sound louder, as if it is being picked up by the mic and then playing that sound in real time through the speakers or headphones. I have tried reading other topics but cannot find an answer to this question. These are the specs I am running on; Windows 7 Home Premium 32bit Pentium Dual Core CPU T4300 @ 2.10Ghz 2.10Ghz I hope someone can help me with this issue, it would be much appreciated.

  Read the article

• Apache does not serve non-locally

  - by yodaj007

  I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• Watch TV/recorded shows from my Comcast cable box on my Mac?

  - by IVR Avenger

  Hi, all. I've got a MacBook that's about three years old (it's the first generation that had a dual core CPU), running Leopard. I've got a Comcast DVR/HD Cable box. Is there something that I can install in between these devices that will let me watch TV from the Cable box on the Mac's display? The Cable box is in one room, but my tush and the Mac are in the other (fixing code on another machine that can't be part of the equation). Any ideas? Thanks! IVR Avenger

  Read the article

• Win 2003 STD network adapter always showing DHCP when in static IP configuration, + it loses the DNS

  - by Darragh

  Hi, I have a server that after the first configuration it was DHCP, now I have added it to our domain and in a static IP, however after a few moments it returns to DHCP but with only some of the IPv4 setting staying the same, It loses DNS for example. I'm not sure what is causing the problem but all I know is this started to happen after I added it to the domain, Would it be a domain policy? or the NIC drivers Spec; Dell M605 Blade server Windows 2003 STD SP1 Intel Xeon Quad core NIC: Dual embedded Broadcom NetXtreme IITM 5708 Gigabit Ethernet NIC w/ TOE

  Read the article

• Unknown monitor in Lenovo laptop

  - by kumar

  I have set of two Lenovo laptops on which Fedora core 13 is installed. On one machine, the monitor is detected properly such that it is possible to connect another monitor. But on another laptop, the monitor is shown as unknown monitor. I tried to fix it by reinstalling xorg-x11-drv-intel.i686. But the problem remains same (unknown monitor) and it is not possible to connect another monitor with this setting. Laptop model: Lenovo G460. Graphics card: Intel Graphics Media accelerator HD. Thanks!

  Read the article

• Why is Firefox so slow and heavy?

  - by Tony

  For some reason, when I go to links the pages seem slow and heavy. It also has a lot of lag spikes between page loads. Basically it seems to freeze then load it all at once fast. I'm currently using Firefox 25. But when I use the same Chrome version, it seems to be very fast and smooth page loading. The CPU it takes on average is about 400,000k. Extensions: iMacros Leethax Ad Block Plus 2.4 Ad Block Plus Pop-up Addon 0.9.1 Computer stats: 6 GB RAM Windows 7 Acer Aspire Laptop 500 GB HDD Intel Core i4-2370M How do I make Firefox load like Google Chrome, without much freezing?

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >