Search Results

Search found 25669 results on 1027 pages for 'ill be back'.

Page 208/1027 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Why Is Volume Shadow Copy Services stopping?

  - by David Mackintosh

  I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

  Read the article

• Some process/service/driver repeatedly presses F5

  - by VitalyB

  Hi everyone, I have the strangest problem that started 2 days ago (Windows7, 64bit). SOMETHING causes my F5 key to be constantly pressed. Rebooting helps, but only for a while, it keeps coming back to that. So far I've tried to disconnect and reconnect the keyboard (physically), however, disconnecting the keyboard doesn't actually do anything. Reconnecting it back again, causes the F5-pressing to stop, but not for very long (seconds/minutes). I'd really like to avoid a binary search for the programs (process closing/keyboard switching/etc) before I can, at the very least, identify the source of the keypress. Is there an application that can show me what is causing a key press? E.g is it the keyboard driver, or some process that executes SendKey repeatedly for reasons unknown. Thanks! P.S FYI, having F5 causes the strangest side effects. Task Manager refreshes very very quickly (as F5 is refresh), the desktop is constantly flickering and all the browsers stop working as they keep trying to refresh. I was lucky to find out what the heck is happening only because I started notepad and saw that current date/time started to appear constantly. If not that, I'd still be wondering.

  Read the article

• Why *do* windows print queues occasionally choke on a print job

  - by Ian

  Y'know they way windows print queues will occasionally stop working with a print job at the head of the queue which just won't print and which you can't delete? Anyone know whats going on when this happens? I've been seeing this since the NT4 days and it still happens on 2008. I'm talking about standard IP connected laser printers - nothing fancy. I support a lot of servers and loads of workstations and see this happen a few times a year. The user will call saying they can't print. When you examine the print queue, which in my case will generally be a server based queue shared out to the workstations, you find a print job which you cannot cancel. You also can't pause it, reinitialize it, nothing. Stopping the spooler is the usual trick and works sometimes. However I occasionally see cases which even this doesn't cure and which a reboot is the only solution. Pause the queue, reboot, when it comes back up the job can then be deleted. Once gone the printer happily goes back to its normal state. No action is ever necessary on the printer. I regard having to reboot as last resort and don't like it. What on earth can be going on when stopping the process (spooler) and restarting it doesn't clear a problem? Its not linked to any manufacturer either. I've seen this on HPs, lexmark, canon, ricoh, on lasers, on plotters.... can't say I ever saw this on dot matrix. Anyone got any ideas as to what may be going on. Ian

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• Replacing compiz/metacity with openbox reduces workspaces to 1

  - by Brian

  I like to use the GNOME desktop, but I prefer to replace its window manager with openbox, with 4 workspaces. However, when I run openbox --replace, the number of workspaces available drops to 1. If I go into obconf, workspaces is still configured to be 4 (~/.config/openbox/rc.xml shows the same). I can get the workspaces to reappear by changing the value in obconf to anything else, and then back to 4. I have just been dealing with this problem since Ubuntu 9.04 (now up to 10.10) since I don't reboot very often. But it's really annoying to have to reset my workspaces whenever I do have to reboot. Changing the value in rc.xml and running openbox --reconfigure does not seem to have any effect. So what is obconf doing that I'm not (sends a dbus message perhaps [EDIT: watching with dbus-monitor I see no messages when changing the workspaces value in obconf])? I was hoping there would be a cleaner way to change the window manager than just running openbox --replace at login. So my questions are: Is there a better way to specify an alternate window manager (i.e. a way that doesn't cause the workspaces to break)? If not, how can I automatically set the number of workspaces back to 4? Update: I finally got around to trying what I commented on MrShunz's answer (adding WINDOW_MANAGER=/usr/bin/openbox to ~/.gnomerc). But the effect is the same as openbox --replace.

  Read the article

• On AWS EC2, Unable to run sudo command after modifying permissions to /usr folder

  - by Kayote

  All, We have searched quite a bit and a few of 'Eliah Kagan's' posts are great about getting access back to sudo. However, our server is on AWS EC2 & I am a complete newbie to this. We are trying to setup Cronjobs for backing up our server data. What we did: Using Putty, we created a script file: usr/share/site-db-backup/backupToS3.php, however, Ubuntu was not saving the changes we made as it reported we did not have permission as user 'Ubuntu'. Error details are: "Upload of file backupToS3.php was successful but error occurred while setting the permission &/ or timestamp. If the problem persists, turn on 'ignore permission errors' option. Permission denied. Error code: 3 Request code 9" So, we ran the command "sudo chmod -R a+rwx /usr" for granting permission to the folder 'usr'. However, now whatever sudo command is run, we get the error: "/usr/lib/sudo/sudoers.so must be only be writable by owner. fatal error, unable to load plugins." We are complete newbies to Ubuntu & EC2 so do need step by step guidance of how to get sudo back & successfully write to the Crontab script sitting in 'usr/' folder.

  Read the article

• Apache reports a 200 status for non-existent WordPress URLs

  - by Jonah Bishop

  The WordPress .htaccess generally has the following rewrite rules: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> When I access a non-existent URL at my website, this rewrite rule gets hit, redirects to index.php, and serves up my custom 404.php template file. The status code that gets sent back to the client is the correct 404, as shown in this HTTP Live Headers output example: http://www.borngeek.com/nothere/ GET /nothere/ HTTP/1.1 Host: www.borngeek.com {...} HTTP/1.1 404 Not Found However, Apache reports the entire exchange with a 200 status code in my server log, as shown here in a log snippet (trimmed for simplicity): {...} "GET /nothere/ HTTP/1.1" 200 2155 "-" {...} This makes some sense to me, seeing as the original request was redirected to page that exists (index.php). Is there a way to force Apache to report the exchange as a 404? My problem is that bogus requests coming from Bad Guys show up as "successful requests" in the various server statistics software I use (AWStats, Analog, etc). I'd love to have them show up on the Apache side as 404s so that they get filtered out from the stat reports that get generated. I tried adding the following line to my .htaccess, but it had no effect (I'm guessing for the same reason as the previous redirect rules): ErrorDocument 404 /index.php?error=404 Does anyone have a clever way to fix this annoyance? Additional Info: OS is Debian 6.0.4, and Apache version looks to be 2.2.22-3 (hosted on DreamHost) The 404 being sent back to the client is being set by WordPress (i.e. I'm not manually calling header() anywhere)

  Read the article

• .NET 2.0 Application now running slow on IIS 7.5

  - by Valien

  I recently moved (and still in testing) an application from a Windows 2003 Server (Physical box) running IIS 6.x to a Windows 2008 R2 Standard (VM) IIS 7.5 server. The application is a .NET framework 2.0 application and is running under a 2.0 App Pool. This site works great except for one thing: Takes forever to get a request back. I've been tracking it with Chrome Inspect Element and it queries the site and can take up to 45 seconds to answer. Now when it does the page(s) render instantly but it's that initial request that's killing it. I see no error logs or issues with the application or Windows Event Viewer or even IIS logs so not sure where to start looking next. Some new changes was that previously the app resided behind a Pix firewall and now is behind a larger network environment in a DMZ zone (and I believe NetScaler is also being used to manage the network). I do not have rights/abilities to look at the network itself but can contact the Data center folks to look deeper into this but I wanted to make sure it's not my application that might be causing the slowdown or IIS. In summary: .NET 2.0 application works great in IIS 6.x Application moved to an IIS 7.5 server and now slow on rendering but when it does render responds back with pages instantly. Edit for solution Found out that it was the SOAP calls that were slowing the site down. In the new datacenter my application cannot request SOAP calls and so they time out after 40-45 seconds or so. Now trying to find out if I can install a proxy server to redirect this...

  Read the article

• Unable to Connect to just Google Servers

  - by Akshat Mittal

  I am in an extremely strange problem. I am unable to connect to just Google Servers. I am not able to access any site related to Google, Google.com | YouTube | Google+ | Webmaster Tools | jQuery CDN, nothing is working. I am able to open any other website (as I am posting this question on SuperUser), even the Google DNS (8.8.8.8 and 8.8.4.4) are offline. Please Help!! Update 1: Google DNS are back online, YouTube is back online. But website on domain google.com is not working (ex: play.google.com, maps.google.com, google.com/search, etc). Update 2: I am able to access Google.com (only) with (one of) its IP addresss(s) listed below: 74.125.227.41 74.125.227.46 74.125.227.32 74.125.227.33 74.125.227.34 74.125.227.35 74.125.227.36 74.125.227.37 74.125.227.38 74.125.227.39 74.125.227.40 Update 3: I consulted my friends nearby and they said that they are also experiencing the same problem. Seams like this is a major problem in this area (or India !!) The Problem is Now Solved!! I am able to open Google.com

  Read the article

• How to get rid of "Maxback Engine" for good?

  - by Jonik

  I used to have a Maxtor Shared Storage II network drive; it broke down long ago already. (Later I tried to recover some data from it, and partially succeeded, but haven't yet fully documented it on that question.) Anyway, I just noticed there are still some lingering bits remaining of the (thourougly crappy) software that came with the Maxtor device: a background process called "MaxBack Engine". I googled around a bit and found something related but not very useful: http://www.straitmac.com/jforum/posts/list/600.page http://discussions.apple.com/thread.jspa?threadID=725692 Under /Applications I found "Maxtor EasyManage.app" which I used to use for controlling the drive, and showed it some "rm -rf". Before deleting, I noted that the bundle did contain "MaxBack Engine.app" under Content/Resources. But still, after reboot, the "MaxBack Engine" process is back. I did notice though that it only appears when logging in with my usual user account; with another account it wasn't launched. So, dear Mac gurus, what could I do about this pest? I guess I could fall back to some Unix hackery and write a cronjob that kills any process with that name, but obviously it'd be nicer to be able to clean up from my computer everything left behind by Maxtor's piece of software.

  Read the article

• New SSD, is the MBR broken? DISK BOOT FAILURE

  - by Shevek

  I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

  Read the article

• Configure IIS to pass-through CGI output without any conditioning

  - by Daniel Watrous

  I'm building a web service on Windows 2008 R2 with IIS 7.5 and Python 2.5. Right now I have the Handler Mappings and everything else setup just fine, Except that IIS is modifying what it gets back from the CGI script before sending it along the the client. Here's an example: I wrote the following CGI script: # hello.py print "Status: 400 Bad Request" print "Content-Type: text/html" print print "Error Message" According to the HTTP spec this should be fine and a Status of 400 should allow for a description of the error message in the body of the response. When the server response actually comes back to me I get the following: Status: 400 Bad Request Date: Fri, 11 Feb 2011 17:58:30 GMT X-Powered-By: ASP.NET Connection: close Content-Length: 11 Server: Microsoft-IIS/7.5 Content-Type: text/html Bad Request I've seen on this forum and others where I can change or eliminate the X-Powered-By header element, but I would like IIS to leave it alone altogether. I'm not sure why it takes my response, deletes "Error Message" from the body and replaces it with "Bad Request" and then adds all that other junk in. Is there some way to tell IIS to just send the response along without making any changes at all?

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Microsoft Mouse and Keyboard Center Needed for Keyboard but Doesn't Support Mouse

  - by eljay

  I recently built a new computer (running Win7 Pro 64-bit) that includes the Microsoft Sidewinder X4 Keyboard. To make use of all the extra features of this keyboard I need the Mouse and Keyboard Center. I just ran Windows Update for the first time on this system and the Mouse and Keyboard Center was included in the update. I'm left-handed and before the update I had the mouse set up for lefty use. Now after the update, it's been set to righty use and the original mouse control panel applet no longer allows the assignment of buttons. For that there's a link to the Mouse and Keyboard Center which does not support my oldish mice. (I have an IntelliMouse Optical and a Creative Mouse Lite Pro.) So I need the new utility for my keyboard, but I have to be right-handed to use my mouse? Really! I tried changing HKCU\Control Panel\Mouse\SwapMouseButtons to 1, but a reboot set it back to 0. Is there some way I can change my mouse back to left-handed? Thanx -eljay

  Read the article

• why does my computer crash?

  - by chobo2

  Hi my computer keeps crashing and I don't know why. At first I thought because I had my cpu over clocked that it all of sudden was crashing. So I set my cpu back to regular speed. This did not help. I then thought it was because 2 sticks of my memory where from a computer that suffered from a power surge. However I just ran the windows memory diagnostic tool( extended) and after like 6 hours of testing my memory it found no errors. So now the only thing that is left is windows 7 64bit. I first over clocked my cpu for a couple months while running XP. Never had a problem. I installed the memory and windows 7 at the same time. But I not sure if it is my memory now since it passed the diagnostic tests. However I am not sure if it is windows 7 either has I installed it twice in the last year. I really don't want to go back to XP to find out if this is the case. So here are my blue screens of deaths(from bluescreen). https://sites.google.com/site/myerrorswin7/errors (I hope you enjoy my great site lol) As you can see most of them are different NTFS_FILE_SYSTEM KMODE_EXCEPTION_NOT_HANDLED BAD_POOL_HEADER IRQL_NOT_LESS_OR_EQUAL SYSTEM_THREAD_EXCEPTION_NOT_HANDLED SYSTEM_SERVICE_EXCEPTION

  Read the article

• MySQL select query result set changes based on column order

  - by user197191

  I have a drupal 7 site using the Views module to back-end site content search results. The same query with the same dataset returns different results from MySQL 5.5.28 to MySQL 5.6.14. The results from 5.5.28 are the correct, expected results. The results from 5.6.14 are not. If, however, I simply move a column in the select statement, the query returns the correct results. Here is the code-generated query in question (modified for readability). I apologize for the length; I couldn't find a way to reproduce it without the whole query: SELECT DISTINCT node_node_revision.nid AS node_node_revision_nid, node_revision.title AS node_revision_title, node_field_revision_field_position_institution_ref.nid AS node_field_revision_field_position_institution_ref_nid, node_revision.vid AS vid, node_revision.nid AS node_revision_nid, node_node_revision.title AS node_node_revision_title, SUM(search_index.score * search_total.count) AS score, 'node' AS field_data_field_system_inst_name_node_entity_type, 'node' AS field_revision_field_position_college_division_node_entity_t, 'node' AS field_revision_field_position_department_node_entity_type, 'node' AS field_revision_field_search_lvl_degree_lvls_node_entity_type, 'node' AS field_revision_field_position_app_deadline_node_entity_type, 'node' AS field_revision_field_position_start_date_node_entity_type, 'node' AS field_revision_body_node_entity_type FROM node_revision node_revision LEFT JOIN node node_node_revision ON node_revision.nid = node_node_revision.nid LEFT JOIN field_revision_field_position_institution_ref field_revision_field_position_institution_ref ON node_revision.vid = field_revision_field_position_institution_ref.revision_id AND (field_revision_field_position_institution_ref.entity_type = 'node' AND field_revision_field_position_institution_ref.deleted = '0') LEFT JOIN node node_field_revision_field_position_institution_ref ON field_revision_field_position_institution_ref.field_position_institution_ref_target_id = node_field_revision_field_position_institution_ref.nid LEFT JOIN field_revision_field_position_cip_code field_revision_field_position_cip_code ON node_revision.vid = field_revision_field_position_cip_code.revision_id AND (field_revision_field_position_cip_code.entity_type = 'node' AND field_revision_field_position_cip_code.deleted = '0') LEFT JOIN node node_field_revision_field_position_cip_code ON field_revision_field_position_cip_code.field_position_cip_code_target_id = node_field_revision_field_position_cip_code.nid LEFT JOIN node node_node_revision_1 ON node_revision.nid = node_node_revision_1.nid LEFT JOIN field_revision_field_position_vacancy_status field_revision_field_position_vacancy_status ON node_revision.vid = field_revision_field_position_vacancy_status.revision_id AND (field_revision_field_position_vacancy_status.entity_type = 'node' AND field_revision_field_position_vacancy_status.deleted = '0') LEFT JOIN search_index search_index ON node_revision.nid = search_index.sid LEFT JOIN search_total search_total ON search_index.word = search_total.word WHERE ( ( (node_node_revision.status = '1') AND (node_node_revision.type IN ('position')) AND (field_revision_field_position_vacancy_status.field_position_vacancy_status_target_id IN ('38')) AND( (search_index.type = 'node') AND( (search_index.word = 'accountant') ) ) AND ( (node_revision.vid=node_node_revision.vid AND node_node_revision.status=1) ) ) ) GROUP BY search_index.sid, vid, score, field_data_field_system_inst_name_node_entity_type, field_revision_field_position_college_division_node_entity_t, field_revision_field_position_department_node_entity_type, field_revision_field_search_lvl_degree_lvls_node_entity_type, field_revision_field_position_app_deadline_node_entity_type, field_revision_field_position_start_date_node_entity_type, field_revision_body_node_entity_type HAVING ( ( (COUNT(*) >= '1') ) ) ORDER BY node_node_revision_title ASC LIMIT 20 OFFSET 0; Again, this query returns different sets of results from MySQL 5.5.28 (correct) to 5.6.14 (incorrect). If I move the column named "score" (the SUM() column) to the end of the column list, the query returns the correct set of results in both versions of MySQL. My question is: Is this expected behavior (and why), or is this a bug? I'm on the verge of reverting my entire environment back to 5.5 because of this.

  Read the article

• Periodic internet connection drops

  - by sterlingholt

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Is there any program (or code, any language) that will mute all of the microphones on my computer?

  - by Sean

  Is there any program (or code, any language) that will mute all of the microphones on my computer? If it is code, please make it as simple as possible, the only language I know is C# and I am still VERY new to it. I just want to setup some way to mute my microphones from a hotkey/shortcut, and if I can just find a program that can do, I will be set. As I said, I can also do a little bit if it is in C#, but the only code I have seen before for this, was miles long (atleast to me). My goal, is I just want a program that opens up, and toggles the mute on the microhpones (all of the system audio input) then closes. That is it, very simple. Thank you to anyone who trys to helps me! EDIT: Yes, I am using Windows. I am using Windows 7 32-bit. I already know that I can go into the volume mixer and do it that way, but I need to do this while running a full screen application, and it is a hassle to have to exit fullscreen, open the volume mixer, the click the mute icon, then go back into full screen and the the whole thing over again to unmute it. And I will be toggling back and forth quite often, so it just takes alot to do that so much.

  Read the article

• SSH attack CentOS Amazon EC2

  - by user37143

  Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

  Read the article

• Strange battery behavior on laptop

  - by EpsilonVector

  My laptop is behaving rather strangely lately, and I was hoping to get some idea as to what may be causing such symptoms. The problem: When charging, very minute or so it loses connectivity with the AC adapter for a split second, and regains it back immediately. When this happens the little light that indicates the computer is plugged in does flicker off and back on, but I checked the adapter by replacing the battery on my laptop, and this indeed solves the problem, so it is probably the battery which is at fault, not the adapter (I also tried to move the adapter's wire around just to make sure it had nothing to do with torn wires). I suppose that the obvious solution is to get a new battery, but as far as battery defects go- this is a rather strange one; it loses connection with the adapter, but still powers the computer, and changing the power setting to a balanced plan (was maximum performance) seem to have solved the problem too. Is there a chance this is not simply the battery, but some kind of other electronic defect? And if not, what can cause it to behave so strangely? PS I tried to recalibrate it- didn't help.

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• E-mail duplication problem

  - by Gavin Osborn

  I have taken out a hosting agreement with a well respected hosting provider for a couple of internet facing servers. We have deployed several applications to these servers which send various e-mails back to us for reporting purposes. Context: Each server runs Windows Server 2003 R2 with the IIS 6.0 SMTP service installed. Each application is configured to use the local instance of IIS to send e-mails. The external IP address of each server is mapped to a particular domain eg: server1.mydomain.com server2.mydomain.com These e-mails are sent from a company domain name and not the domain name of the hosted servers (eg: [email protected]) Symptoms: A small number (<1%) of e-mails sent from these applications appear to be duplicated. These are exact duplicate in terms of both content and message headers. The Fix: I contacted my hosting provider and they told me this was a common problem & instructed me to: Change the HELO response of your mail server service to a FQDN (server1.mydomain.com && server2.mydomain.com) Create a DNS A record that resolves the FQDN of your mail server to the primary IP address of your sending mail server. Create a PTR record that resolves your primary IP address back to your mail server's FQDN In the sending domain's (mycompanydomain.com) DNS zone file, add the appropriate SPF record for your hosted servers. eg: v=spf1 a mx include:mydomain -all The Problem Continues: I made all of the changes as prescribed above, I was a little hesitant because these steps seemed to suggest they were more for stopping your messages getting blocked than they were for stopping them from being duplicated - but I am certainly no expert in these matters. It has been 5 days since I applied this fix and the problem still persists. I am certain that these problems are not a bug in the software because they are 4 different applications installed on 2 different servers, all of whom are exhibiting this strange behaviour. This behaviour has also not been seen in our UAT environment. Were my hosts correct to suggest this fix? If not, does anyone know what could be the cause of this problem? Many Thanks

  Read the article

• How do I keep a bridge enabled on a bonded interface?

  - by jlawer

  I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >