Search Results

Search found 7124 results on 285 pages for 'printer driver'.

Page 209/285 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216 | Next Page >

iTunes sees my iPhone, but Windows 7 x64 doesn't

- by Herb Caudill

After reinstalling Windows 7 (64-bit), it has stopped recognizing my iPhone. I can see it in iTunes but not in Windows Explorer, so I can't get the photos off. I'm having this problem on three different machines and two different iPhones (my wife's and mine). It's maddening. I've had every version of iPhone since it first came out and I've never had this problem before. I've uninstalled and reinstalled iTunes (currently at 10.2.1.1). I've updated iOS on the phone (currently at 4.3). In the device manager, this is what I see: Here's the properties screen for the unrecognized iPhone: And here's what I get after going through the "update driver" process: Any ideas? At the end of my rope here...

Read the article
Can't enable Windows XP file sharing

- by colemanm

The "sharing and security" option in the right-click context menu on a folder is no longer there. The File and Print sharing option is "installed" and turned on in the TCP/IP properties, but the ability to share any folders has disappeared, along with all previously shared folders. Where should I check to see what the issue is here? EDIT From comments below: "Server" service is not starting, see comment below for more... Firewall is completely disabled, too. This is XP Pro, Simple File Sharing is turned on. We've discovered that the "Server" Windows service is not starting on bootup for some reason. When attempting manual start, we get "error 2001: specified driver is invalid."

Read the article
GTA 4 crashes while trying to run it

- by Damian

Hi! I got those two errors when I'm trying to run GTA4: Description: Critical runtime problem Problem signature: Event Name Problem: APPLICATION CRASH System RAM: -1 Available RAM: -532590592 Number of CPUs: 4 Video Card Manufacturer: NVIDIA Video Card Description: NVIDIA GeForce 9800 GT Video Card Driver Version: 8.17.0012.5919 Version system OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 And the second error: Problem signature: Event Name Problem: BEX Name Application: GTAIV.exe Version Application: 1.0.7.0 Timestamp Application: 4bd9efbe Module Name error: StackHash_fea7 Module Version with the error: 0.0.0.0 Timestamp module with error: 00000000 Exception Offset: 0000b513 Code exception: c0000005 Data exception: 00000008 System Version OS: 6.1.7600.2.0.0.256.1 ID settings Regional: 1045 Additional Information 1: fea7 Additional information 2: fea78afc140967119290cc27385e0510 Additional Information 3: 20ce Additional Information 4: 20ce3e492a2aa7e5b8cfe9b7b1f05b42 My PC spec: Proc: Intel i5 (4x2,66ghz) RAM: 8GB DDR3 1066mhz Graphics: ASUS EN9800GT/DI/1GD3 OS: WINDOWS 7 64-bit I think it should work well on my PC, I couldn't find the solution to get it working so I hope You can help me. P.S. Sorry for my English - I'm from Poland.

Read the article
What is causing my newly built PC with Windows 7 to BSOD?

- by Ben S

I recently built my own PC from parts and installed Windows 7 and I have been getting BSODs with various different stop codes. The latest was 0x24, but I've also had 0xd1 and 0x1e. However, Windows does not let me know where the fault occurred, so I have no idea how to go about resolving this. I know the cause is likely a hardware driver, but I don't know which and cannot find information about how to use the minidumps to troubleshoot my problem. I've uploaded the last three minidumps in case someone can make sense out of them and let me know what could be causing my BSODs. Thanks, Ben

Read the article
Windows 7 "Not Responding"

- by sizeight

At my office we've got 2 Dell XPS M1530 laptops. Both have been running up to date installations of Windows 7 with NOD 32 Anti Virus for months now with no problems. Last week however both started freezing with "Not responding" issues every few minutes when browsing the web. It doesn't matter which browser, the latest versions of Firefox, Chrome and IE8 all do the same. After a few minutes the browser "wakes up again" but freezes again very soon. I suspect it's an OS update issue, a driver/OS conflict or something. Anybody got a solution for this?

Read the article
Amarok on Ubuntu 9.10 rapidly skipping tracks

- by danwoods

Hello all. Subject really says it all. When I try to click on any track, Amarok rapidly moves through the playlist, pulling external information (wikipedia etc) for each song, but not playing it. I feel like it might be a problem with my sound card or driver or something, but all other media players work fine. I can play sounds from within Amarok when I test different sound devices (they all play). I removed the program and re-installed it and still no luck. Any ideas?

Read the article
Amarok on Ubuntu 9.10 rapidly skipping tracks

- by danwoods

Hello all. Subject really says it all. When I try to click on any track, Amarok rapidly moves through the playlist, pulling external information (wikipedia etc) for each song, but not playing it. I feel like it might be a problem with my sound card or driver or something, but all other media players work fine. I can play sounds from within Amarok when I test different sound devices (they all play). I removed the program and re-installed it and still no luck. Any ideas?

Read the article
OpenVPN stopped working, what could have happened?

- by jaja

I have Openvpn, and it worked great when I used it on PC (Windows 8), then I copied all files (Certificates and config) to an Android 4 phone to use them. Now, Openvpn works on the phone, but not the PC. Specifically, when I open Google I get: The server at www.google.com can't be found, because the DNS lookup failed, but the VPN seems to be connected. I have a simple question, could the problem be because I copied the same files? Routing table before connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 =========================================================================== Routing table after connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 **.**.***.** 255.255.255.255 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Server conf:- port 1194 proto udp dev tun ca ca.crt cert myservername.crt key myservername.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 push "redirect-gateway def1" Client conf:- client dev tun proto udp remote 89.32.148.35 1194 resolv-retry infinite nobind persist-key persist-tun mute-replay-warnings ca ca.crt cert client1.crt key client1.key verb 3 comp-lzo redirect-gateway def1 Here is the log file:- Tue Dec 18 16:34:27 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Tue Dec 18 16:34:27 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Tue Dec 18 16:34:27 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Dec 18 16:34:27 2012 LZO compression initialized Tue Dec 18 16:34:27 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 18 16:34:27 2012 Socket Buffers: R=[65536-65536] S=[65536-65536] Tue Dec 18 16:34:27 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue Dec 18 16:34:27 2012 Local Options hash (VER=V4): '41690919' Tue Dec 18 16:34:27 2012 Expected Remote Options hash (VER=V4): '530fdded' Tue Dec 18 16:34:27 2012 UDPv4 link local: [undef] Tue Dec 18 16:34:27 2012 UDPv4 link remote: ..*.:1194 Tue Dec 18 16:34:27 2012 TLS: Initial packet from ..*.:1194, sid=4d1496ad 2079a5fa Tue Dec 18 16:34:28 2012 VERIFY OK: depth=1, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:28 2012 VERIFY OK: depth=0, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue Dec 18 16:34:29 2012 [myservername] Peer Connection Initiated with ..*.:1194 Tue Dec 18 16:34:32 2012 SENT CONTROL [myservername]: 'PUSH_REQUEST' (status=1) Tue Dec 18 16:34:32 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: timers and/or timeouts modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: --ifconfig/up options modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: route options modified Tue Dec 18 16:34:32 2012 ROUTE default_gateway=192.168.1.254 Tue Dec 18 16:34:32 2012 TAP-WIN32 device [Local Area Connection] opened: \.\Global{F0CFEBBF-9B1B-4CFB-8A82-027330974C30}.tap Tue Dec 18 16:34:32 2012 TAP-Win32 Driver Version 9.9 Tue Dec 18 16:34:32 2012 TAP-Win32 MTU=1500 Tue Dec 18 16:34:32 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Tue Dec 18 16:34:32 2012 Successful ARP Flush on interface [26] {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} Tue Dec 18 16:34:37 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD ..*. MASK 255.255.255.255 192.168.1.254 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 Initialization Sequence Completed

Read the article
Keyboard mapping issue in Virtualbox on Mac OS

- by stanleyxu2005

I run Windows 7 as a VM in VirtualBox on my MacBook Air (using OS X 10.7). If I do not shutdown the VM but save its machine state. The keyboard will behave strangely after resuming. It seems the Windows Logo key is always hold. When I type the key 'u', the Control Panel will be shown. I tested on a real Windows 7, the same dialog will be shown when I press Win-key and 'u'. When I type the key 'e', the Explorer will show up, some as press Win-key and 'e' on a real Windows 7. If I click 'Restart' from the Start menu of Windows 7, after restarting the VM, the keyboard works again. I think there are some conflicts with keyboard driver in VM. It is quite annoying, usually I usually close a VM by saving its machine state, not shut the OS down. Is there any way to solve this problem?

Read the article
Need help diagnosing cause of BSOD

- by n00neimp0rtant

I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

Read the article
Clonezilla , NLite and PCs with different hardware specs..

- by r2b2

Hi, I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

Read the article
How to disable horizontal scrolling within virtualbox on Ubuntu guest, Windows 7 host?

- by Steven Rosato

I am using Windows 7 as Host, Ubuntu Karmic as guest OS with guest tools installed and I get an annoying glitch when switching from host to the guest machine: Vertical scrolling switches to horizontal! (using the mouse wheel). Since I don't really care about horizontal scrolling, how can I disable this? I have checked the web and the only thing I found was to play in the xorg.conf file and adding in the section "InputDevice" Option "ZAxisMapping" "4 5" which would enable vertical scrolling only. The thing is, I don't have that section in my config file so I guessed that I would need to add Section "InputDevice" Identifier "VBoxMouse" Driver "vboxmouse" Option "ZAxisMapping" "4 5" EndSection But that does not seem to work after restarting xserver. Any workaround for this?

Read the article
What options can I use in totem, xine or vlc to play on machines with limited resources?

- by Nina

Mplayer has some options that allow me to play it on a machine with limited resources. I can use mplayer -vo x11 -zoom -framedrop to play videos when otherwise I'd run out of memory. At least I think I'm running out of memory. I am running our of some resource for sure. -vo sets the video output driver -zoom actually I don't know what this does, but it works for me ;-) -framedrop allows mplayer to not render frames if it falls behind. Are there similar command line controls (or a defaults file) for totem, vlc or xine?

Read the article
ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

- by roosteronacid

I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

Read the article
Can't add German as input language in Windows XP

- by jdm

I have a laptop that was brought to a computer shop for a hard disk problem. They replaced the disk and reinstalled windows XP, although the English version (the laptop has a German keyboard). I'd like to switch the input language to German. Usually I know how to do this (via "Regional and Language Options"), the problem is when I choose Languages/Details/Add... it doesn't offer me the German keyboard layout: It also uses the "Standard 101/102-Key or Microsoft Natural PS/2 Keyboard" driver - the laptop's keyboard is a 104/105 key German version. I can't seem to change this. Did I just miss the setting, or what is going on here?

Read the article
How to clone and deploy multiple machines?

- by Mimi

Hi, See what I wanna do is basically make bootable clones or disc images or whatever(let's call it "stuff" for now ) and store many of them in a single big HDD. Then, I wanna use that big HDD and the "stuff" in it to be able to deploy new machines without the hassle of reinstalling Windows and whatnot(i.e. I do not want to restore nor simply clone a same machine, I literally want to use clones to save time during machine set up). Obviously I'd deploy the "stuff" onto an HDD going into a machine that I know the hardware of to avoid driver issues and whatnot. I alos have enough Windows keys to deal with the multiple activations. I tried using Acronis True Image but it doesn't seem to do what I want(unless idk how to use it properly). Any advice is welcome thanks :)

Read the article
Group policy not applying to security group

- by ihavenoideawhatimdoing

Preface: I have enough privileges to create GPOs in my OU, and have made a few of them for some simple tasks (like deploying a printer to certain users). Not actually a sysadmin...I'm a developer who is winging it. I wanted to create a GPO that would set a mapped folder for a certain security group (which I recently created and that contains only myself). Did the following: Created the GPO in MyOU - Users Removed the default Authenticted Users under Security Filtering Add the security group with my account to Security Filtering Set up the mapping via the User Configuration option Changed GPO Status to "Computer configuration settings disabled" Left WMI filtering to Closed the GPO at this point... Logged in as the target user; ran gpupdate /force Logged out, logged in, ran gpresult /r, no mention of my GPO Rebooted Logged in, re-ran gpupdate /force Logged out, logged in, ran gpresult /r, still no mention of my GPO If I log in with another completely different user, their RSOP information shows that the new GPO is being ignored due to a security restriction, so it appears to be "working" for other users. I just can't get it to actually show up in RSOP for the user it should be working. Is there anything else I can do short of rebooting endlessly and crossing my fingers?

Read the article
Help: Best way to do a TV-out in 7300GT Nvidia video card?

- by Martin Ongtangco

I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

Read the article
how to disable isight auto adjustments ?

- by George Profenza

The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

Read the article
How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

- by user60813

Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

Read the article
Pressing an accent key (´ / ?) adds the character twice in most programs

- by sh code

This might seem as duplicate of Pressing key with accent character makes it enter twice but it is not: About three days ago, the issue started - I am using Slovak (Slovakia) keyboard, and the key for adding accents/diacritics (just left from backspace) acts strangely - it should "do nothing" upon pressing, and then when character key is pressed right after it, it should output that character with accent/diacritics. However, in most programs, pressing it once results in immediately outputting the accent itself twice (which under normal circumstances happens when you press the key twice). This issue doesn't happen in Visual Studio or any program I make in it, and Pidgin, it seems to happen everywhere else (firefox, notepad, MS OneNote, Windows Explorer itself). I am not aware of any software installations, driver changes or system updates between the time it worked properly and the time when it broke. What could be the problem and how do I solve it?

Read the article
Sony Bravia KDL-32L5000 PC resolution slightly off.

- by user18818

Hi, I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

Read the article
Windows XP runs New Hardware Wizard for usb keyboard and mouse, can't find drivers

- by Randy Orrison

I have a PC that up until a couple days ago was working fine. I moved it from one site to another and now when I plug in the USB mouse or keyboard (the same ones that were working previously) XP brings up the New Hardware Wizard. Going through it, the correct keyboard and mouse are identified, but XP can't find the drivers. I've tried manually searching for the driver (using the Have Disk option) - the first file it's looking for is in the c:\i386 directory, but that installs a generic HID mouse device; the system then runs the hardware wizard for a new "unknown" device. The system was SP2, I have installed SP3 in hopes that would help, and I've also downloaded and installed the mouse drivers from Dell's site (there are no specific drivers for the keyboard), with no change. Before I completely reinstall XP, is there anything else I should try?

Read the article
My PC becomes very slow after changing page file in XP.

- by Jane

Hello there, I have 5 partitions in my computer (C, D, E, F, G), and C: is the system partition. Recently I changed the page file setting to use 768-768 MB from the G:, without changing the C: default value (256-512 MB). Everything runs fine until I rebooted my PC. I unset the G:'s page file before I rebooted my PC. Well, after I rebooted my PC, my XP becomes VERY slow. damn slow. I don't know how long I wasted to wait for the boot screen to disappear. (Well, maybe about 1-3 mins. Normally it is under 10 secs) and when I tried to enter the desktop, it just like using a computer without a VGA card, or VGA driver installed. Very slow. Any suggestions to fix this problem? Because I hate to repair-install my XP =\ Thanks.

Read the article
Is it possible to install Windows Server 2012 on a Dell PowerEdge with PERC S100 card?

- by Warren P

According to Dell's own website, the Windows Server 2012 media driver "inbox" does not contain drivers for the Perc S100 controller that is in a Dell PowerEdge T110 II server we'd like to evaluate with Server 2012. I have found drivers only for Server 2008 R2, which is what the server is currently running. Is it possible to upgrade this server? (Booting up the Server 2012 DVD image leads to the expected result that it can not locate the system's hard drives or its hard drive controller card, as the drivers for the PERC S100 are not on the installation DVD image.)

Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216 | Next Page >