Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 209/260 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Using wifi router as bridge to increase signal?

  - by overtherainbow

  A friend of mine lives in an appartment building whose structure is such that wifi signal is very weak. Even a USB key won't work. I was thinking of buying an entry-level wifi router and reconfigure it as a bridge to act as repeater. Would that increase the chance of getting a good signal, or I shouldn't bother? If experience shows that it does improve things significantly, is their another router I should look at besides the Linux-based Linksys models? Thank you.

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Map folder as drive permanently in Windows

  - by MajesticRa

  Lets say I need to map folder C:/D as drive D: One can use SUBST command to map folder as drive in Windows. SUBST d: C:/D I am absolutely happy how SUBST does the work. So I set this command as a startup task using the task manager. A problem here is that if I have a flash in a USB port while booting Windows, the flash is got mapped as D: and SUBST fails. The question is how to make C:/D to be D: permanently. So other drives (especially flash drives) don't break this during startup. P.S. I know I could set D: to be R: which is unlikely to conflict with other drives. But I would greatly appreciate another answer.

  Read the article

• Lync client configured as room

  - by captainmish

  We have a few usb cameras in meeting rooms that people can plug their laptops into, which works ok, but we're looking for better... Probably a long shot, but does anyone know of a way to have something like a "common area" client, where a PC connected to a webcam and speakers/mic can become a bookable resource, dragged in to conversations and automatically show video? A workflow I imagine: User books a room with "special" lync client as attendee Meeting time comes, they go to the room and fire up lync on their pc "special" lync client automatically (or is dragged in) joins and starts video, local attendees use audio and video from the special client Any tips welcome!

  Read the article

• Is there a software that can remap the keys for a speficic keyboard?

  - by Vilx-

  There are several keyboards attached to my computer. I'd like to remap the keys on ONE of them, but keep the rest as they were. Is there a software that does this? As for the "why" - I have this idea that I'd like to have a "multimedia keypad" which is separate from my main keyboard, but I could not find any online. So I think that I could take a typical USB numpad (they cost like 5$), and remap the keys on one of them. Add appropriate stickers, and I'm all seat, cheaply. I know that it's theoretically possible, but before I get my hands dirty and write my own software, I'd like to see if there's maybe an existing one out there. Oh, yes, I'm running Windows 7.

  Read the article

• windows 7, slow keyboard

  - by dwight kelly

  I am using Windows 7. the keyboard requires appoximately 1 second of hold down before it sends the letter. the pc wil click once at the 1/2 second then at 1 second the letter will show up. I thought the keyboard was bad and I purchased a new one (usb) and the same thing happened. I pulled out an old ps/2 keyboard, and the same thing. I booted the pc up and went into bios. the keyboard works fine there. I tried unninstalling and reinstalling the drivers, no change please advise

  Read the article

• Smart backup software

  - by gisek

  I use a laptop on daily basis. As I have a lot of important data there it would be nice to do backups of some directories every day. Can you recommend a specific application that would take care of it? Maybe there is an app that would instantly commit changes I make in a directory on my laptop to the backup folder? The important thing is that I have some big files (a few GB's) that have some minor changes very often. I'm talking about VirtualBox disk images. It would be nice if the software could handle it smartly. Also notice that I'd like to store it on an external usb HDD, which sometimes isn't plugged in.

  Read the article

• printing in linux

  - by Neilvert Noval

  Hello all. I've been a linux user for quite some time. But haven't do printing until now. I just wanna ask how to do printing in linux? I have researched a bit on it. I found some $> echo "print me" > /dev/lp0, but unfortunately, I have no lp0 in my /dev. I don't know if this is the right thing to do. Nevertheless, please tell me of ways on how I can print from my linux box. Here are some details: OS: debian linux 5.0.4 printer: disclosed until it is necessary connection: usb connection So do i need to add a printer first? From the printer manual that I read, this printer model has no linux driver.

  Read the article

• print job doesn't go to print queue

  - by flatsguide

  I have two printers hooked up to my intel imac. I am having a printing error. It seems that whenever i try to print (a simple text doc) I am unable to get the print job to go to print queue with one of my printers. I have a HP c7280 and a HP c3100. I am able to get one working properly, but the other doesn't seem to allow it to go to the print queue. I have switched usb cables (with the printer that I know works) and both printers are recognized by the computer in the printer preferences pane. I've tried reseting the printer system in the printer setup utility.. reloaded the drivers from HP.. etc. If anyone has a suggestion or could point me to a little help i'd be VERY grateful Best Regards.. B

  Read the article

• Windows 8 stuck installing update

  - by Marcom

  I just restarted my laptop to finish installing a Windows update and now it is stuck on please wait. I have tried a system restore but there is only one restore point in the list and it does not work for some reason... I also tried to do a refresh but it asks me for media. I plug in the usb I used to install windows 8 a while and go and says that the media failed to load. I'm kind of stuck on options now. I can't boot and I can't restore and it seems I cant format either! Is there anything anything else I can do to get things going?! I'm running Windows 8 on a dell xps 14 ultrabook. Win 8 is installed on an msata drive and booting using EFi.

  Read the article

• Is there a way to backup all my files and replace with 0-byte files with same name?

  - by laggingreflex

  My main drive on laptop keeps filling up so I take a backup on a USB and delete the original files. But then I find myself getting (downloading or getting from someone else) files that I already have backed-up but couldn't recall at the moment. So is there a way I can keep a 0-byte file with the same name as teh backed-up copy so that when I'm asked whether to overwrite the existing file, I can easily choose no knowing I probably have this file already in the backup. EDIT: better yet, replace with a shortcut(.lnk) on the external drive so I can access the files hassle free and not get any errors because of 0-byte files being accidentally opened.

  Read the article

• Is it possible to replace the Logitech G500 wire without rebuying the mouse?

  - by leladax

  It has to be replaced ideally in whole, from the point it starts inside the mouse (with a white 4-5 piece of wires connection) to the end (of the USB connector to the computer) or at least to a considerable length because there is fatigue very near the mouse and the more I fix it there with soldering the closer it gets to being unfixable or reaching towards 'inside' the mouse where fixing it will be hard or impossible. So I wonder if there is a way to get a replacement of the whole thing or at least the inside-the-mouse connector to a certain length. Also I wonder if other mice types are identical in the connector of the inside.

  Read the article

• How do I make a backup of a live server?

  - by Jurily

  At my new job, I have a production server with the following qualities: Windows (XP I think), ancient hardware Absolutely vital database No backups whatsoever Everyone in the company has full admin rights, the passwords are stored in a .txt on the global share No installers, except for the OS The machine itself is sitting on a wooden shelf 5 feet above the ground against an external wall with frequent truck traffic on the other side; the shelf is already bent from the constant load Hasn't been rebooted in $DEITY knows how long, my predecessor wasn't even sure if it would survive it UPS is installed, but since everything is hooked up to it, it would last 10 minutes tops No spare parts or hardware budget How do I make a full backup with minimal impact on the server? I'm not sure how close it is to a total meltdown. For all I know, plugging in a USB stick could kill the company, and of course it will be all my fault, since "it was running fine before you touched it". The ideal solution would be a VM, so I have a test environment as well (separate of course).

  Read the article

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• Multiple SMTP servers in Thunderbird3

  - by ldigas

  Situation: 2 mail accounts - each with its own pop3 and smtp servers, accesed normally. Except, when using Vodafone mobile network (you know, those usb or pcmcia cards ...) in which case mails are send using Vodafone's SMTP server. I configured both accounts in thunderbird for their default servers, and then added under multiple identities, another called Name of User (mobile) for each account. And it works. Except, I don't like the fact that when I send mail using mobile smtp server it sends them under Name of User (mobile) <-- the mobile part being important. I could of course, delete that part, but then when sending mail, I'd have no way of differenting between the two. They'd both look as Name of User email@address_of_user.com. So, what would be the easiest way to solve this ? It is not a major problem, but it is annoying.

  Read the article

• How to change the terminal to SCO compliant in Ubuntu

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• HP Deskjet 3600: Offline and won't stop blinking and won't print.

  - by George Bailey

  Using Vista and an HP Deskjet 3600 on USB connection Normally when I unplug the printer, I open the printer queue and in the title bar it says "HP Deskjet 3600 - Use Printer Offline" then the offline message will go away and it will start printing. But for some reason, the bower button light is continually blinking. (this is the only light on the machine). The printer queue says "HP Deskjet 3600 - Offline" and when I unplug it it says "HP Deskjet 3600 - Offline - Use Printer Offline". I have tried unplugging it for a few hours, also tried turning it off for a few hours. Does anybody know what the single word Offline means? Does anybody know how I can clear out the memory in the Printer? (this is my guess as to what is causing the problem)

  Read the article

• Why are my hardware tabs disabled for my VMWare player image?

  - by djangofan

  I just installed a Ubuntu 10.10 image on VMWare player and after I finished installing I was messing with the hardware settings and I did the following: 1. disabled the floppy device 2. changed the CDRom to "use system cdrom" 3. tried to enable the VMWare tools but it complained that the vm was in "Easy Install" mode After I fiddled with the VM now my floppy and 2 CD rom devices as well as sound card and USB settings are all disabled in the VM hardware settings. Any idea on why this occurred and how to fix it?

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Truecrypt in place decryption. Is this possible?

  - by Keyo

  I want to decrypt my entire partition and turn it back into standard NTFS. I encrypted a large partition on my 1TB drive before I took it through the airport. For this I used the in place method on truecrypt for win7. I'm on a mac now and there doesn't seem to be any way to decryppt the drive in place. It mounts fine, but I don't want to buy another drive just so I can shift files around. The drive is hooked up via USB. Would this be a problem?

  Read the article

• Ubuntu 12.10 sources.list empty after install

  - by Martin Nielsen

  I recently installed the Ubuntu 12.10 server version from a USB stick. The step "Install additional software" or whatever keeps failing, so i though screw it and continued. Everything else worked like a charm. I thought. Turns out, the only two entries in my sources.list are the install CD. This means that i have no way of getting a.. well.. anything installed. Can someone give me a short list of repositories that i need so i can put them in the file? And on a similar note: What is the comment character for the sources list? #?

  Read the article

• How to distill / rasterize a PDF in Linux

  - by Sampo

  We have a printer at our office that prints PDF files from a USB stick. It prints most files okay, but it has problems with some, especially ones generated with Latex. Some PDFs it simply refuses to print, some PDFs it prints with courier-type font, and some it prints fine except for equations. I'm looking for a way to "distill" PDFs into a dead-sure format to print. Either by simplifying / normalizing the PDF to the point that any renderer will render it correctly, or by simply making each page a 600dpi raster image in the PDF. (I could split the PDF into individual raster images and combine them manually, but I want something scriptable.) The output file size doesn't matter, as long as it's sure to print, has A4 paper size (or the original) and 300~600dpi resolution.

  Read the article

• Symantec Backup exec 2012 for SBS - moving data to offsite drives

  - by Will Lennard

  Can anyone advise how best to run the following strategy, or even if it is possible/sensible strategy? I am looking to backup an SBS server using BE2012 where the data is backed up on a weekly full backup, with subsequent daily incrementals till the end of the week, a fresh full backup will then be taken the next weekend, and the cycle repeats for 4 weeks, thus 4 full backups with incrementals. This months worth of backups will then be moved off to an offsite store via USB drive for safe keeping. Is this viable, sensible, or am i just a bit crazy? All ideas are welcome.

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >