Search Results

Search found 1024 results on 41 pages for 'boots'.

Page 21/41 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Computer bluescreen-ing with 0x7A and 0xF4 errors

  - by lcarpenter

  Hiya, This computer is locking up for around 5-30 seconds before throwing Blue Screen of Death's with 0x7A and occasionally 0xF4 errors. The log files don't really show anything informative, and Windows Update doesn't show any new drivers for the HDD. Upon restart, it shows a "A disk error has occurred /n Press Ctrl+Alt+Del to continue", and to fix this I go into WinRE via the pendrive and run "bootsect /nt60 C: /force /mbr" and that seems to fix it so it boots. And then the cycle repeats. If you want any more information please ask. Thanks, Luke Carpenter

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• scheduled chkdsk on Windows 7 blinking the hard disk light every 5 seconds, what can I do?

  - by Jian Lin

  PG&E (the local electricity company) came and took out the old power meters and put in a new ones by brute force and with no advance notice in our neighborhood, so my computer went down in power. So I went to Windows 7's drive C and schedule a Disk Cleanup (chkdsk) on the next boot up. When it boots up, it says A disk check has been scheduled To skip disk checking, press any key within __ second(s). and then after it shows To skip disk checking, press any key within 1 second(s). it just sits there, with no further message. the hard disc light blinks every 5 seconds. So what is to be done now? I certainly don't want to brute force power off again.

  Read the article

• Windows OS's cannot boot on new internal harddrive

  - by Kothari

  I have installed a new internal 500GB hard drive into a Dell Inspiron N4030 and it appears that the installation was entirely successful. The BIOS recognizes the drive and shows the serial number of the hard drive. The problem is that I cannot boot any Windows OS. I have tried XP, Vista, Windows 7 and Windows 8. It displays only a black screen with a blinking cursor. Fedora boots successfully. My old hard drive crashed, but would atleast boot up these OS's before it died. Any help?

  Read the article

• grub error: symbol 'grub_puts_' not found

  - by ladaghini

  I updated from Ubuntu 9.10 to 10.04, and after installation, the computer restarted. When grub loaded, all I get is a screen that says error: symbol 'grub_puts' not found and a useless grub prompt that looks like grub_rescue I've tried reinstalling grub from the livecd (usb drive) following this guide: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows to no avail. Sometimes, when I start up from the live usb, linux doesn't recognize the harddrive at all. It's not in the places menu, nor does fdisk list anything. If anyone can help fix up grub so it recognizes and boots up the two os's I have installed, I'd appreciate it. Also, I know little about grub, so try and make it easy to understand.

  Read the article

• new monitor won't work on win3.1

  - by Rick Workover

  My old system monitor for my Windows 3.1 machine failed and the new flat screen has a sync error. The new monitors do not support the refresh/screen size it is set to. It boots up into Windows and the monitor is blank with a sync error. Without Windows 3.1 working I don't know how to change the refresh/size to get it to work. I haven't used Win3.1 in so long that I can't remember how to fix this. So, how do I reset the refresh rate and screen resolution it is set to, without being able to actually see anything?

  Read the article

• Broadcom BCM5716 Hangs on CentOS 6 Boot

  - by someotherguy

  I have a fresh CentOS 6 installation on a Dell R310 server with a Broadcom BCM5716. The onboard NIC is causing the boot to hang for some reason. Welcome to CentOS Linux Starting udev: udev: starting version 147 Boardcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.23b (Feb 01, 2011) bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 That's it... then it just hangs / freezes. If I disable the NIC via the BIOS settings, CentOS boots fine. I've downloaded and installed the latest driver from Broadcom's website. Any ideas?

  Read the article

• Computer wont POST after power outage

  - by aaron

  I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

  Read the article

• EC2 out of space on root disk, moving it to ephemeral

  - by Joseph Misiti

  I am spawning a few test servers on ec2 that happen to be m1.larges. I am using these test servers for load balancin testing. Anyways, most of the servers I have used before have been backed by EBS, but these instances (ubuntu 11.04) obviously come with a lot of ephemeral space located @ /mnt. What I noticed that is happening is I am running on space on the root disk. I am trying out this tutorial http://www.turnkeylinux.org/docs/using-instance-storage moving my /home + /usr directories to /mnt and then remounting them. This works except it does not survive a reboot. Am I missing something here or is this tutorial not completely correct. How do I make space on my / drive so I can do stuff and survive re-boots.

  Read the article

• How To Start NX/VNC Session At Ubuntu Boot Time?

  - by darkAsPitch

  I want an NX or VNC session to start automatically when an Ubuntu server boots up - without a monitor connected - loading a certain user's desktop and keeping it loaded and ready until I log in via NX or VNC. How would one accomplish that? This code works via my terminal when I am logged in as the NX user, but not via root, and not in the init.d folder. No idea why? /usr/NX/bin/nxclient --session /home/user/.nx/config/SavedSession.nxs Please provide somewhat simplified instructions! I am certified linux newb.

  Read the article

• A minimal Linux distribution for my ASUS EEE PC

  - by Andrioid

  I recently bought myself a ASUS EEE 1000HE and I intend to use it for note-taking and light browsing at the University. The machine has a 10" screen so the interface needs to be very compact. I've already tried: EEEbuntu: Very nice driver support and out of the box experience. But I feel that it is too slow booting and the general experience is too heavy in my opinion. Moblin 2: Looks very cool, boots just fine but is way too unstable to use. Also find it annoying that I can't find hotkey documentation anywhere. Any Netbook OS recommendation welcome (although those specific to my model would be great). There is an entire jungle of distributions out there, so if you've been on a safari, please share your experience.

  Read the article

• DVD-ROM disappeared under Windows-7

  - by hometoast

  Windows-7 (build 7100) has forgotten about and refused to recognize that I have an optical drive attached. Linux LiveCD sees it (sees it and it boots from it), so it's isolated to the Windows installation. I do have VirtualCloneDrive installed. But I know I had access to the optical drive after the installation of that. Only recently did I try to rip an iso image for mounting in a VM. I do not see the device under device manager (Start,Run,"devmgmt.msc"). I really do not want to do a fresh install. What are my next steps?

  Read the article

• Using a Raspberry Pi as a VPN?

  - by sudo rm -rf

  So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

  Read the article

• Can't boot into Ubuntu from CD, or from Acronis True Image recovery disk

  - by ChrisA

  I can boot my computer off a home-burned-from-ISO-image Windows 7 (x64 or x86) installation CD, without problems. It's a Quad 6600, 4GB RAM, 8800GT and most of the time runs Win7 with no problems. However, if I boot off a CD containing Ubuntu (10.04 or 9.something IIRC), or a recovery disk created with Acronis True Image Home 2010, it: boots starts to load the OS from the CD then hangs ... and I have to reset. I've tried all these CDs on another computer, and they boot up into Ubuntu or Acronis respectively with no problems at all. Any ideas what to look for? Sorry this is a little vague but I have no idea where to start, really ... if there's more information needed I'll edit the question. TIA!

  Read the article

• Ubuntu not installed-Please Remove installation media and close tray and press enter

  - by Ram

  I have downloaded Ubuntu 12.04.1 LTS 32 bit, burned it on DVD and tried to install it on my PC. My PC is running in Windows 7 Ultimate 32 bit mounted on the C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through the CD, It boots and the Ubuntu install windows opens It offers "Try Ubuntu" and "Install Ubuntu". I choose "Install Ubuntu" Then I go on to install Ubuntu with Windows(First Option)-install It shows some blank screen with some lines, and says "Please Remove installation media and close tray and press enter" Then the PC restarts and runs Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am an Android Developer. So I need to install Ubuntu for my Android Development purpose.

  Read the article

• Screenshot before windows starts: without another computer?

  - by Nano8Blazex

  I'm pretty sure that this must have been asked before, but haven't found a duplicate question, thus I shall ask again... Is it possible to take a screenshot of my computer before the OS boots up WITHOUT an external computer or virtualization software like VMWare?? e.g. at the BIOS, or the "Windows is Loading" screen, even at the login screen? Is it possible to take screenshots of BSODs as well? EDIT: I'm using a desktop pc running Windows 7 Ultimate in a home environment. Thanks.

  Read the article

• Nvidia Ion HDMI output problems with Acer Revo

  - by Techfeeler

  I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• PCMCIA preventing laptop from booting up

  - by Pongus

  My friend has brought his dead laptop over. It is a Sony Vaio with Windows Vista. When booting up, it blue screens and reboots. I have tried to boot up with Knoppix and this will freeze when starting up PCMCIA. If I start Knoppix with knoppix nopcmcia it disables pcmcia and boots up fine. So I presume there is a problem with the PCMCIA controller on the laptop. My friend does not use any PCMCIA cards, so doesnt really need it. Is there anyway I can similarly disable PCMCIA so that Windows will boot up fine?

  Read the article

• Windows 7 installation asks for DVD drivers

  - by koen

  I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

  Read the article

• Notepad Automatically Launches Upon Boot Up of my Windows 7 64-Bit Desktop PC

  - by Simon

  Around 12 months ago, When my Windows 7 PC boots up, Notepad started to appear automatically on the desktop (as a duplicate ie one on top of the other), both displaying the same writing inside, and the name of the Notepad was: desktop-Notepad. [.ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787 I cant remember the exact details as its been so long now but a friend told me, this was due to a "hidden attribute" belonging to notepad becoming "unhidden"and therefore showing itself on the desktop at startup. He showed me a series of steps to either hide the attribute again or to delete it ( telling me that upon restart of my computer it would be recreated/regenerated.) I did indeed follow his guidance however after trying to hide it or delete it (it was never recreated after restart which supposedly it should have done) One notepad still is autolaunched with the text as shown above everytime I startup my PC. As I found this forum I thought I might try again for a solution to prevent notepad from launching. Thankyou

  Read the article

• USB to USB CD ROM emulator

  - by JohnnyLambada

  I'm wondering if anyone knows of a CDROM emulator that runs on Linux. I want to emulate this configuration: [CDROM DRIVE]----USB CABLE----[COMPUTER UNDER TEST] Where [COMPUTER UNDER TEST] is a computer that boots from a physical CD inserted into the [CDROM DRIVE]. Only instead of the [CDROM DRIVE] I want the following configuration: [CD IMAGE BUILD MACHINE]-----USB CABLE-----[COMPUTER UNDER TEST]. I want to build an ISO image on the [CD IMAGE BUILD MACHINE] and have some sort of USB CDROM emulator running on it to serve up the ISO image to the [COMPUTER UNDER TEST] as though it was talking to the [CDROM DRIVE]. Does this exist? If it does, I can't find it. I want to do this so I can test out bootable CDs without burning a lot of coasters.

  Read the article

• Dell SC1435 always requires F1 at boot

  - by David Mackintosh

  I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

  Read the article

• Windows Server 2008 R2 and Keyboards

  - by Brian

  Hello, I have a machine with WIN server 2008 R2 installed, when the machine boots up, it says keyboard failure. The keyboard I had was from an older machine and was PS/2, I got a PS/2 to USB converter in order for it to work, but it says keyboard failure and doesn't work. Is it because it's pretty old and that's it, or does it have to be USB? I'm going to look into a new one, but want to make sure I don't get this issue again... Thanks.

  Read the article

• How to boot windows 8 in a dual boot along with windows 7? [migrated]

  - by GoldDove

  I have installed a WIndows 8 evaluation about a week ago. Usually, it asks me every time I turn on my computer whether to boot into windows 8 or windows 7. The default was windows 8 after 30 seconds. I changed that just yesterday to be default windows 7 after 5 seconds. And after I changed the setting, I went ahead and went into windows 8 and did my work. Today, when I turned on my computer, it is failing to ask me which one to boot it in. It simply boots directly into Windows 7. Is there any reason for this? Can I no longer boot into Windows 8?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >