Search Results

Search found 183740 results on 7350 pages for '404 not found'.

Page 210/7350 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Dell Powervault MD3000 - Not sharing Files between servers

  - by Kevin

  I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Co-worker told me ubuntu server LTS is not built for production env

  - by Sandro Dzneladze

  I was confronted with a very vague statement today, but unfortunately I had no clue how to respond or analyse this. Co-worker told me ubuntu server LTS is not built for production env. What is there that makes it not built for production environment? (obviously no answer followed, so this is my question to you...) is it ...packages? ...ease of use? ...supported systems? ...stability? ...support? ...popularity?

  Read the article

• Project Server 2010 site creation - the database connection string is not available

  - by Brandon Montgomery

  I am trying to get Project Server 2010 up and running on a Win Server 2008 box. I've got Sharepoint 2010 installed and Project Server 2010 installed. I open SharePoint Central Administration, then I go to Manage Service Applications Project Server Service Application. It looks like there is a site under the "Sharepoint - 80" section, but the Status says "Failed - see the Application event Log". When I click on the site and select "Retry" I get the same thing. In the event viewer, I see an error with SharePoint Foundation Search as the Source - it reads: Could not create a database session. Context: Application '276504a6-93b1-4c1f-a900-fd6ed9d5c117' Details: The database connection string is not available. (0xc0041228) How can I fix this? Is there some configuration I missed?

  Read the article

• Internet Explorer 8 only running as process not application

  - by Lord Peter

  Internet Explorer 8 on XP SP3 starts without browser window. Task manager doesn't show application, but iexplore.exe is listed twice in process window. Process Explorer reports "no visible windows found for this process" when I try to "bring to front" in the iexplore.exe properties dialog. Have reinstalled (twice), full scanned with MBAM/MSSE/SpyBot etc, re-registered ieproxy.dll (another Google-inspired tip!), run without addons (-extoff switch), and still same problem. Recently uninstalled VMWare Player and wondered whether problem related to VM network adapter somehow, but Firefox still works perfectly. This is one of my home machines, not critical, and it is backed up, so I will restore if I have to. But any and all suggestions will be gratefully received. It would be nice to understand what might have happened, and perhaps others may benefit from any knowledge that comes to light.

  Read the article

• Bind9 forwarding zone not working

  - by JMW

  i've setup a forwarding zone on a RHEL6 Bind server like this: zone "office.local" IN { type forward; forward only; forwarders { 192.168.0.2; 192.168.0.3; }; }; when i try to query using dig @127.0.0.1 monitorsms.office.local i see the following message in the syslog: client 127.0.0.1#39376: query: monitorsms.office.local IN A + (127.0.0.1) validating @0x7ff7640357d0: monitorsms.office.local A: bad cache hit (monitorsms.office.local/DS) google tells me, that there is an issue with DNSSEC, but both servers do not have DNSSEC configured and thus do not send any DNSSEC records. What's wrong with my configuration?

  Read the article

• Public Folder not Visable from Front End Exchange 2003 Server

  - by Kyle Brandt

  I have a public folder that does not receive emails when the emails are sent via the Front-End Exchange Servers. When I go into the System Manager on the Front-End I don't see this particular public folder listed under the Public Folders. However, I do see it listed from the Front-End server. I see the emails that are not making it to the public folder listed in the local delivery queue on the front end server and they are in a retry state. Does anyone know how I might troubleshoot this?

  Read the article

• aws s3 works with script but not on cron

  - by user3800017

  guys.. My first post ! hope not the last .. I have few bunch of servers on aws ec2 platforms. I made a simple script to backup my custom logs on their s3 storage bucket. The problem is the script works fine .. but I tried to add it to the crontab. And the script executes but not the s3 sync/mv part ! Here is my code: NOW=$(date "+%b_%d_%Y") MY_HOSTNAME=`uname -n` mv /opt/req/req* /opt/req/bkup/ mv /opt/response/res* /opt/req/bkup/ cd /opt/req/bkup/ tar -cvf ${MY_HOSTNAME}_req_bkup_${NOW}.tar re* rm *.txt aws s3 mv /opt/req/bkup/* s3://req `

  Read the article

• Can't insert cells in Excel 2010 - "operation not allowed" error message

  - by Force Flow

  I was working on a spreadsheet in Excel 2010, and all of a sudden when I attempted to insert a new row of cells, I saw that the insert and delete options were grayed out. I attempted to copy a different row and insert it as a new row, but I got the error message: "This operation is not allowed. The operation is attempting to shift cells in a table on your worksheet." I have not merged or hidden any cells/rows/columns. There are no formulas. There is no data verification. I tried closing and re-opening the spreadsheet. Searching for answers brings up nothing useful.

  Read the article

• IIS site not resolved by DNS server

  - by Alexio

  I've a problem with my network. My Config: SVR01 (ws2008r2): DNS server and Domain Server SVR02 (ws2008r2): IIS (v7.5) Domain Clients In SVR02 there are many sites. When I try to connect on one site (such as: demo1.myhomesite.intra) the browser say "Internet Explor can not display the webpage". Well... In this case I found a workaround: unplug and plug the lan cable (or disable and enable wifi) in my client and the site work correctly. But this workaround is not a solution. Please, can you help me??

  Read the article

• Powershell if statement not working - help!

  - by Dmart

  I have a batch file that takes a computer name as its argument and will install Java JRE on it remotely. Now, Im trying to run this Powershell script to repeatedly call the batch file and install Java on any system that it finds without the latest version. It seems to run error-free, but the statements inside the if code block never seem to run - even when the if conditional test evaluates to true. Can anyone look at this script and point out what I'm possibly missing? I'm using the Quest AD cmdlets, and BSOnPosh module. Thank you. get-qadcomputer -sizelimit 0 -name mypc* -searchroot 'OU=MyComputers,DC=MyDomain,DC=lcl'| test-host -property name |ForEach-Object -process { $targnm = $_.name $tststr=reg query "\\$targnm\HKLM\SOFTWARE\JavaSoft\Java Runtime Environment" /v Java6FamilyVersion if(-not ($tststr | select-string -SimpleMatch '1.6.0_20')) { $mssg="Updating to JRE 6u20 on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append cmd /c \\server\apps\java\installjreremote.cmd $targnm } else { $mssg ="JRE 6u20 found on $targnm" Out-Host $mssg Out-File -filepath c:\install_jre_log.txt -inputobject $mssg -Append } }

  Read the article

• Account not getting completed deleted within linux

  - by lbanz

  I've got a nas box running some flavour of linux 2.6.31.8.nv+v2 with an arm processor. It has got a samba share called 'all' that has full read write access to everyone. However one Windows machine cannot access it without prompting for authentication and I found out from the logs that the windows account matches a local account on the nas box. What I then went to do is delete the local account on the nas. I can see that /home,/etc/password + /etc/shadow the account doesn't exist anymore. However the samba logs, shows that it thinks it is still there as it says account is disabled. I've tried rebooting both nas + windows box. Is there somewhere else that it stores account information? I logged on with a different account on that Windows machine and I can access the share fine. The smb logs shows that it can't find the user and then allows anonymous access.

  Read the article

• Best way to split LAN computers on two WANs (not load balancing)

  - by lpfavreau

  What is the best way to split the computers of a LAN (about 50 computers) to go on two WANs, depending on the computers' IP address or computers' configuration (gateway). I'm not looking for load-balancing, I need to be able to route which computer uses which Internet connection. A solution would be to rewire the old office to split the two distinct groups that need to use two different Internet connections but I'm not sure it's worth it at the moment. I have a pfSense router configured with the LAN (DHCP), WAN1 and WAN2. I also have the IP addresses (and ability to configure) the next router on WAN1 and the one on WAN2. What would you suggest? Routing based on IP addresses ranges? Different gateways? VLANs would be difficult for the same reason as to why rewire is a bit complicated. Thanks!

  Read the article

• Daemons did not start automatically ubuntu 10.04

  - by Anton Prokofiev

  Hello, All! I have a strange behavior on Ubuntu 10.4: few daemons (apache2 and postgresql (8.4SS from enterpriseDB) did not start automatically. Funny things that time-to-to they do. (If I just restart my computer everything looks ok, but if I turn it off for the night, nothing work..., so I have to start them manually) I've googled this problem a little bit, but the only answer I have found was to run: sudo update-rc.d apache2 defaults I've called it but the answer was: System start/stop links for /etc/init.d/apache2 already exist. Any Ideas?

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• headings numbering not updating

  - by Marwen Hizaoui

  I'm writing a report and I have some problems with headings. I have this structure: Chapter 1(heading1) 1.1(heading2) 1.1.1(heading3) 1.2(heading2) Chapter2(heading1) 2.1 2.2 The problem is that when I choose heading 1 word writes a number before chapter - 1 chapter 1 I want numbers to appear only from heading 2. I managed to change it using multilevel lists but it doesn't update appropriately. I mean I removed the number before chapter 1 for example but it did not update chapter 2 subheadings that became numbering from 1 (not 2). Please help me out. thanks.

  Read the article

• Ubuntu 10.10: 2nd instance of Firefox does not obey GTK2 customizations

  - by Cocoro Cara

  Hi On Ubuntu 10.10 I started a 2nd instance of Firefox using the command: $ firefox -ProfileManager -no-remote & Created a new profile and everything works smoothly except for the fact that this instance of FF does not obey by GTK2 customizations that I have placed in ~/.gtkrc-2.0 Moreover, only SOME of the customizations are not obeyed. For example, the vertical scrollbars are supposed to be on the left, but they are on the right. The scrollbar arrows are together (Mac-like) as specified, so is the scrollbar width. The first instance obeys all customizations with scrollbars on the left. Any ideas?

  Read the article

• Workstation 7 build 203739 - Capture Movie Mouse Pointer Not Visible

  - by BMIVM

  Hi, I have noticed that whenever I create a Capture Movie, the movie is fine but the mouse pointer is not visible at all. The clicks are on buttons file menus are executed but is hard for a viewer of the capturre movie session to follow the recording smoothly. This was not a problem in previous versions of WorkStation. Is this a bug or is there a setting I can set to see the mouse pointer? Note: VM Tools are installed, Host is Vista Ultimate Edtion SP1, x64 and the guest is a Win XP SP2. Thanks in advance for your help.

  Read the article

• if exist !SOMEPATH! not working in batch file

  - by akash

  I have a batch script in which i am using multiple if exist statement, the problem is all statements are working except one . Following variables are set SETLOCAL ENABLEDELAYEDEXPANSION SET basedrive=E: SET tfworkspace=!basedrive!\TFS SET envdefault=%1 SET projenv=!envdefault! echo subapp=!subapp! subappservice=!subappservice! SET tfworkspacepath=!tfworkspace!\!releasebranch!\!app!\!subapp! SET tfworkspacepathservice=!tfworkspace!\!releasebranch!\!app!\!subapp!\sourcecode\build\!projenv! This statement works, if exist "!tfworkspacepath!" (robocopy "!tfworkspacepath!"\sourcecode\messagebroker\ /E /NFL /NJS /NDL /ETA "!basedir!\!messagebroker!" ) else SET /a foldererror=1 This statement doesn't work, by does not work i mean even thou the path does not exist it it still tries to robocopy. if exist !tfworkspacepathservice! ( robocopy !tfworkspacepathservice! /E /NFL /NJS /NDL /ETA "!basedir!\!scripts!") else SET /a foldererror =!foldererror!+1 I am new to batch writing, please guide me

  Read the article

• I found a some bad sectors with chkdsk. Should I be worried?

  - by mottalrd

  Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

  Read the article

• GVFS Locations Not Available In ~/.gvfs

  - by Aaron Copley

  So, I can mount GVFS locations correctly (specifically CIFS) either from the Gnome "Places" menu, or via the command line gvfs-mount, but the filesystem is not mounted in the expected location; ~/.gvfs. In fact, running the mount command does not list any GVFS filesystem at all. This is reproducible for non-root users while the root user behaves as expected. Strace reveals a permissions error for the user mounting the filesystem for the path /home/username/.gvfs. Ownership and permissions are correct and there are no extended attributes for the path as revealed by lsattr. Also, /root/.gvfs and /home/username/.gvfs are on the same filesystem. All packages are current. Any ideas?

  Read the article

• Windows 7 Ult machine can see XP Pro but not vice versa

  - by Chadworthington

  My new Windows 7 Ult. PC can attach to my work laptop and pull files but my work laptop cannot find my Windows 7 on the network. Is there some sort of limitation going on here? Before I got the new XP machine, my old XP Pro PC could pull files from the XP Pro laptop but not vice versa. The common thread seems to be that the work laptop cannot see other PCs, Windows 7 or not. Could it be because that PC is on a work domain? When I pull files from the work PC, I am prompted for domain credentials, which I provide.

  Read the article

• .htaccess enabled, but not working.

  - by Aristotle

  I been having some very frustrating issues with getting .htaccess to work on my new server. I'm not very experienced in managing a server, but I've spent the last three days pouring over documentation and every resource I can get my hands on. I've attempted to try a very basic application of .htaccess, and yet it fails to give the expected results. I've setup a test over at http://173.201.185.217/test/. Immediately within this directory is an .htaccess file with the following command: deny from all If I'm not mistaken, this should deny access to /test, but it doesn't. It just sits there allowing anybody to view the contents. What could be wrong with my server/configuration? The server is running CentOS.

  Read the article

• Get-QADComputer -LdapFilter & NOT operator

  - by dboftlp

  I'm having issues excluding an OU from my LDAP filter $DaysAgo = (Get-Date).AddDays(-31) $ft = $DaysAgo.ToFileTime() Get-QADComputer -SizeLimit 0 -IncludeAllProperties -SearchRoot 'DC=My,DC=Domain,DC=Local' -LdapFilter "(&(objectcategory=computer)(lastLogonTimeStamp<=$ft) (!(ou:dn:=DisabledPCs))(|(operatingsystem=Windows 2000 Professional) (operatingSystem=Windows XP*)(operatingSystem=Windows 7*) (operatingSystem=Windows Vista*)(operatingsystem=Windows 2000 Server) (operatingsystem=Windows Server*)))" I'm looking to query for all Windows OS systems that haven't logged in to AD for more than 31 days & that are not already in the OU "DisabledPCs", which is where I'll be moving them to. When I run it now, I'm getting all the systems I'm looking for, including those in the "DisabledPCs" OU... I've tried several variations including: (&(!(ou:dn:=DisabledPCs))) As well as putting it in different locations in the filter (not that I thought it would make a difference, but I obviously don't know that...) Thanks in advance for any help, -dboftlp

  Read the article

• Clicking on Dock icon does not bring window on top (OS X Lion)

  - by Andrey Fedoseev

  I am using OS X Lion and I have a very annoying problem with windows not showing up when I click on Dock icons. It happens when I have some windows opened in one space but I am viewing another space at the moment. For example, I have Mail and Skype on space #2 but I am on space #1. Note that all windows are not minimized. I want to quickly switch to Mail. So I click on Mail icon in Dock, it switches the space to #2, menubar shows that active window is Mail but Mail window is actually below Skype window. The strangest thing is that sometimes it works as expected showing the Mail on top. I can't see any logic here, it's absolutely unpredictable, thus annoying. Does anyone experienced such problems? I wonder if it's a bug or correct behaviour. Is there any way to fix that?

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >