Search Results

Search found 10745 results on 430 pages for 'anoyon 12'.

Page 210/430 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Raid0 performance degradation?

  - by davy8

  Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

  Read the article

• Retrieving a specific value from “df -h” using shell

  - by diegodias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

  Read the article

• Ubuntu Not Starting After Installing Software Updates

  - by Prabhu

  I just did a software update on my Ubuntu 9.10, after that it asked me to restart my system which i did and once i did that, grub opend some simple bash shell or something... i dont know how do i run ubuntu now??? Ubuntu 9.10 was installed 1 week back using the wubi installer... which is like a one click install from windows... it is installed on the same partition as winxp... i chose 12 gb hd space while installing ubuntu.. it was working good for 1 week... i decided to do the software updates today morning and now its not even starting!!!

  Read the article

• Satellite TV on my PC?

  - by jasondavis

  What would be a good solution for hooking up the satellite TV box (Dish network) in my room to be able to watch it on my PC and possibly record video from it? Please share with me the best cards, cables, software, anything else needed to do this in the most efficient way? I am looking at the WinTV-HVR from Hauppauge. I am not sure, for performance, what would be the best to go with, PCI, PCI express, USB2.0? Also on the Hauppauge website I saw this note: "WinTV-PVR products will not work in PC systems with 4GB or more of memory." The new PC I am building will be 12-24gb of DDR3 RAM, does that mean their products will not work at all with my memory? So confused now!

  Read the article

• Where can you see the data that's been recorded by a tracking cookie?

  - by frenchglen

  I've always read that cookies can, and do, store sensitive information such as OTHER websites that you've visited outside the one to which the cookie belongs. I've started to read up about it and can see that it's persistent cookies which typically do this - and well I've started to look through cookie files on my computer - but I can't see any telling info in them! Just a few jumbled lines and not the scary urls of other sites that I'm looking for. How do I view them? Or is the raw data of visited urls only ever stored on the server end of the site that's tracking me? I'm on Win7 and can look at cookies from FF 12, Chrome 18, IE9 and Safari 5.1. Thanks for illuminating this once and for all.

  Read the article

• PLesk Error: pmm-ras error (Error code = -6): during restore.. /tmp folder to increase?

  - by eric

  I had to re-install plesk on a centos 6 system after a crash. The full backup file is 11 gb. but at the beginning of the backup reinstall I get the error Error: pmm-ras error (Error code = -6): argh ! my disk organization is like this Filesystem Size Used Avail Use% Mounted on /dev/xvda1 3.7G 801M 2.9G 22% / /dev/mapper/vg00-usr 14G 1.5G 12G 12% /usr /dev/mapper/vg00-var 155G 14G 134G 10% /var /dev/mapper/vg00-home 3.9G 136M 3.6G 4% /home none 1000M 7.5M 993M 1% /tmp I suppose I have to increase my /tmp folder to accept the backup size,but I don't know how-to. I'm on 1&1 cloud server Thanks for your help. You can imagine the emergency of this situation...

  Read the article

• grouping by date in excel and removing time in a pivot table

  - by Ashley DeVan

  My data looks like this: count Added Date 1 8/26/09 3:46 PM 2 8/21/09 6:50 PM 3 8/21/09 3:04 PM 4 8/21/09 3:21 PM 5 5/1/09 6:56 AM 6 5/1/09 8:12 AM 7 5/1/09 8:00 AM 8 5/1/09 8:18 AM 9 5/1/09 8:58 AM 10 5/1/09 8:58 AM 11 5/1/09 9:06 AM 12 5/1/09 9:44 AM 13 5/1/09 9:50 AM 14 5/1/09 11:17 AM 15 5/1/09 11:27 AM 16 5/1/09 11:29 AM 17 5/1/09 11:39 AM 18 5/1/09 12:10 PM 19 5/1/09 12:33 PM When I do a pivot table, I cannot get it to sum by day, it breaks it up by minute. I've even tried parsing the field, but the time always creates an issue. How to I get my pivot table to give me a count by day and ignore the time stamp?

  Read the article

• PC case and PSU screw question....

  - by user32569

  Hi, I have maybe a funny one to ask.... To this Christmass I bought new PC. When I started to asseble it, I found that my case (Artic Cooling Silentium T11) has 12 screws for HDD, DVD etc, and 6 screws for the expansion cards. Well, first thing that surprised me was, why only 6 screws for expansion card, when case has actually 7 slots. And second, what are PSU screws supposed to some with? The PSU, Case or nothing? Becouse neighter PSU or Case had them. PSU is Evolve Storm 600W. Well, I know case and PSU are not some high end devices, but still, would it hurt them to add 1 screw for expansion cards and 4 for PSU? So, my question is, is this situation normall, or which one (Case or PSU) does normally screws come with? Thanks.

  Read the article

• Innodb : cannot allocate the memory for the buffer pool

  - by mingyeow

  My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

  Read the article

• site timing out when under heavy load

  - by naunu

  My client sends out eblasts at 8am monday/wed/friday. Between 8:15-8:45 the site becomes extremely slow and many users sessions timeout. My setup: Mediatemple VE 2gb dedicated ram (3 burst) Ubuntu 9.10 Apache2-mpm-worker PHP5.3-fcgi MySQL 5 I recently tried to remedy the problem by switching from apache2-mpm-prefork to mpm-worker, but am still having the same issues. My apache settings are: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 <IfModule mpm_worker_module> StartServers 12 MinSpareThreads 25 MaxSpareThreads 96 ThreadLimit 96 ThreadsPerChild 25 MaxClients 225 MaxRequestsPerChild 0 </IfModule> The site is only getting ~10,000 page views during the 8am-9am hour, which I dont think should be stressing the server too badly. Maybe it is an error with the PHP settings, or bandwidth per unit time, or the site outgrew the server? Any suggestions would be very helpful - as you can see i've given it a good go before looking for help (installed mpm-worker). Also, can anyone suggest to me some free load testing software, or a tutorial on mod_status? Thank you

  Read the article

• Windows Storage Server 2003 R2 RDP Disconnection

  - by Antitribu

  I am unable to remote desktop to our Windows Storage Server 2003 R2 machine. There are a few people about with similar issues but no answers around. Symantec End Point is installed but no network protection. Using rdesktop in Linux I receive: ERROR: send: Connection reset by peer NOT IMPLEMENTED: PDU 12 ERROR: Connection closed Where the "PDU XX" number changes on each connection. In windows using the latest mstsc I receive: The connection was lost due to a network error. Try connecting again. If the problem persists, contact your network Administrator. Any ideas?

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• HTTP Requests Fails for WordPress sites after upgrading from PHP 5.2 to PHP 5.3

  - by anjanesh

  I've upgraded from Ubuntu 9.10 to 10.04 beta 1 and PHP got upgraded from 5.2 to 5.3 Now all my WordPress & Magento sites arent working. I tried retrieving the URL headers from the command line, but HTTP request fails. Utilizing get_headers in a small script, PHP Warning: get_headers(http://local.vhosts1.com): failed to open stream: HTTP request failed! in get_headers.php on line 12 But HTTP request fails only for WordPress and Magento based sites - not custom written ones. Does this probably have to do with some htaccess directive ?

  Read the article

• One bigger Virtual Machine in Cloud

  - by flyer

  I just setup virtual machines on one hardware with Vagrant (this is just a test environment, not production!). I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with e.g. 12 cores? ------------------------------- | VM (12c) | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | VM (4c) | VM (4c) | VM (4c) | ------------------------------- | Bare Metal (8c) | ------------------------------- I need this information to have a bigger picture to continue.

  Read the article

• Windows Media Player library not appearing properly

  - by Rick

  Windows Media Player library is listed 80% under unknown artist/unknown album despite each song containing the album and artist details. The library location is usually unresponsive and Media Player 12 is usually hanging for 3 or 4 minutes every 5 or 6 minutes. Library was fine two weeks ago then I had updated and it has not worked right since. My PC specifics: Windows 7 Ultimate 32bit 8 GB ram Processor 3.76 Ghz Primary drive 1Tb Secondary drive 500Gb Default save for the library is on the secondary drive. I've already tried media player settings troubleshooter and the library troubleshooter to no avail.

  Read the article

• How to debug why w3wp.exe crashes randomly?

  - by sassyboy

  On the main production server, the IIS worker process crashes sometimes. From the event viewer I get the following information. Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319 Exception code: 0xe053534f Fault offset: 0x0000b9bc Faulting process id: 0x%9 Faulting application start time: 0x%10 Faulting application path: %11 Faulting module path: %12 Report Id: %13 This happens randomly on the prod server and I have not been able to recreate this crash anywhere else. This was happening on IIS 6, and we recently moved to Windows Server 2008 and IIS 7.5 and the crash happens there as well. How to go about finding the root cause of this?

  Read the article

• Intel mobile CPU power consumption at idle levels?

  - by Ivan Petrushev

  I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

  Read the article

• Is it possible (and safe/reliable/non-damaging) to use a 20-pin ATX PSU with a 24-pin ATX motherboar

  - by Legooolas

  I have a reasonably-decent old 20-pin PSU which I want to use on a newer 24-pin ATX motherboard. I see that the ATX page on wikipedia mentions that 24-pin ATX is backward-compatible, and I can find 20-to-24 pin adapters to buy for a couple of dollars/pounds at lots of places, but I can't find any mention of restrictions on the use of these. Will this work on any motherboard, or is it a per-motherboard compatibility question? Are there any other restrictions like the level of power available (and hence the additional 4 pins with +12, +5 and +3.3V lines which are already on other pins)?

  Read the article

• $HTTP_HOST multiple rewrite

  - by nrivoli

  I have Apache 2.2, Ubuntu 12. I want to load a different envionment based on my HTTP_HOST, this works for the first domain only, after that I get error 500, " Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace." and I am not able to see my error... RewriteEngine on RewriteBase / RewriteCond %{HTTPS} off RewriteRule ^ - [F] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{HTTP_HOST} ^server-dev.domain.tld$ [NC] RewriteRule ^(.*)$ /api/dev.php/$1 [L] RewriteCond %{HTTP_HOST} ^server-qa.domain.tld$ [NC] RewriteRule ^(.*)$ /api/qa.php/$1 [L] #RewriteCond %{HTTP_HOST} ^localhost$ [NC] #RewriteRule ^(.*)$ /api/localhost.php/$1 [L] I am accesing to https://server-dev.domain.tl/api/whatever https://server-qa.domain.tl/api/whatever

  Read the article

• s3fs: how to force remount on errors?

  - by Alexander Gladysh

  I use s3fs 1.33 on Ubuntu 9.10. Regularily it gives me errors like this: rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: close failed on "/mnt/s3/mybucket/filename": Software caused connection abort (103) rsync error: error in file IO (code 11) at receiver.c(731) [receiver=3.0.6] rsync: connection unexpectedly closed (86 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(600) [sender=3.0.6] Any attempt to work with mounted directory after that gives this error: Transport endpoint is not connected To get rid of this, I have to remount. Is there a way to force a remount automatically?

  Read the article

• Tab title is wrong with ssh/screen on osx

  - by sds

  I am doing ssh -t host screen -D -RR in OS X (10.9) terminal tabs. My ~/.screenrc is identical on all remote hosts and contain the following line: hardstatus string "%H(%n:%t)$USER %h" My ~/.bashrc is also identical on all hosts. When I login to host host_u (Ubuntu 12.04.3 LTS) running Screen version 4.00.03jw4 (FAU) 2-May-06, the tab title on the OS X terminal is host_u(1:bash)sds ~, as expected. When I login to host host_c (CentOS release 6.3 (Final)) running Screen version 4.00.03 (FAU) 23-Oct-06, the tab title on the OS X terminal is ~/FooBar (which is the local OS X directory from which I ran the ssh/screen command. Problem: the hardstatus line does not work on host_c.

  Read the article

• FreeBSD Ports: How can I see all dependencies, and all dependencies for those dependencies, for a port?

  - by Stefan Lasiewski

  I'm trying to build a port which depends on apache-ant. I thought I could run make build-depends-list to see all dependencies required by this port: # make build-depends-list /usr/ports/devel/apache-ant /usr/ports/java/jdk16 /usr/ports/math/gmp But after installing everything, the port had a dependency list which was a mile long: apache-ant-1.8.1 desktop-file-utils-0.15_2 gamin-0.1.10_4 gettext-0.18.1.1 gio-fam-backend-2.26.1 glib-2.26.1_1 gmp-5.0.1 inputproto-2.0 javavmwrapper-2.3.5 kbproto-1.0.4 libX11-1.3.3_1,1 libXau-1.0.5 libXdmcp-1.0.3 libXext-1.1.1,1 libXi-1.3,1 libXtst-1.1.0 libiconv-1.13.1_1 libpthread-stubs-0.3_3 libxcb-1.7 pcre-8.12 perl-5.10.1_3 pkg-config-0.25_1 python26-2.6.6 recordproto-1.14 unzip-6.0 xextproto-7.1.1 xproto How can I see all dependencies, and all subdependencies for a port?

  Read the article

• Random BSODs on Win7 boot. Can't find a valid reason.

  - by 0plus1

  Hi, I bought and assembled a new pc: ASUS m4a785td-v EVO AMD x4 620 OCZ Black Edition 2x 2gb WD 500gb sata Win7 Ultimate 64bit fresh install BSOD on boot. Formatted, reinstalled, BSOD on install. Ran memtest - no errors. Ran Win7 install in safe mode. Installed, random BSOD on win7 startup, even in safe mode. Updated BIOS. Ran the win7 memtest (no error), booted after some tries and ran Prime95 blend test for 12 hours straight with no errors at all! When the pc has booted, win7 runs as smooth as possible, I've been playing STALKER for 4 hours straight with not a single hiccup. Using Blue Screen View I can see that every BSOD involves: ntoskrnl.exe Here are the dumps Any help would be greatly appreciated, this thing is driving me crazy.

  Read the article

• Puppet nodes cant' find master, ec2 public versus internal ip addresses and hosts files

  - by Blankman

  If I setup my hosts files such that they reference all other ec2 nodes using the internal ip addresses, will this work or do I have to use the external ip addresses? Do I need to specify anything in my security group to get internal ip addresses to work? e.g. /etc/hosts ip-10-11-12-13.internal some_node_name If I do this, can I reference some_node_name anywhere in my scripts where I would have used the ip address previously? On my puppet agent servers, I have a reference to my puppet master like: public-ip-here puppet When I reboot my puppet agent's, syslog shows they couldn't find the master with the message: getaddinfo : name or service not known I did get it to work by updating /etc/default/puppet and I added to the options: --server=public-ip-here From what I read, puppet will by default try using 'puppet', and I set this in my hosts file so why wouldn't it be picking this up?

  Read the article

• Nginx access log shows authenticated user "admin"

  - by bearcat

  I came across a line in my Nginx access log: 218.201.121.99 - admin [12/Dec/2012:18:33:18 +0800] "GET /manager/html HTTP/1.1" 444 0 "-" "-" Let me stress that there is only 1 record with this IP. Notice the authenticated user admin. After some googling, I was able to find out only that this is authenticated user (http://wiki.nginx.org/HttpCoreModule#.24remote_user), which was authenticated by the Auth Basic Module (http://wiki.nginx.org/HttpAuthBasicModule). However, nowhere in my site (configuration) do I use HTTP basic authentication. What is going on? How did it get there? Was the user authenticated?

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >