Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 210/273 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• Android How do you save an image with your own unique Image Name?

  - by Usmaan

  This sounds like a issue a beginner like me would only have...this is my code... private void saveAvatar(Bitmap avatar) { String strAvatarFilename = Id + ".jpg"; try { avatar.compress(CompressFormat.JPEG, 100, openFileOutput(strAvatarFilename, MODE_PRIVATE)); } catch (Exception e) { Log.e(DEBUG_TAG, "Avatar compression and save failed.", e); } Uri imageUriToSaveCameraImageTo = Uri.fromFile(new File(PhotoActivity.this.getFilesDir(), strAvatarFilename)); Editor editor = Preferences.edit(); editor.putString(PREFERENCES_AVATAR, imageUriToSaveCameraImageTo.getPath()); editor.commit(); ImageButton avatarButton = (ImageButton) findViewById(R.id.ImageButton_Avatar); String strAvatarUri = Preferences.getString(PREFERENCES_AVATAR, ""); Uri imageUri = Uri.parse(strAvatarUri); avatarButton.setImageURI(null); avatarButton.setImageURI(imageUri); } This does save the image but when i go to look at the image on the sd card ti is called imag001 etc not the ID i am labelling it. How do i save the image with a name i want to call it? regards

  Read the article

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• Why am I having trouble loading Ubuntu alongside Windows as an application?

  - by STEVE PEAVEY

  I have two good CD ISO files. Both load OK, but when I boot to Ubuntu the screen is fragmented by dozens of white lines. Program works but is useless. I'm running Windows XP SP3 on D201GLY MB, CELERON CPU 220 1.02 GHZ, 512 RAM What could be my problem? CPU? Not enough RAM? Or maybe even the graphics card? to be clearer i am trying to load either ubuntu 8.04 or 9.04 inside windows as an aplication from known GOOD cd's. trying to load with the wubi installer that is loaded on the cd's. sis mirage graphics 32mb vid prosser sis 662.

  Read the article

• an issue with VMWare Workstation 10 and three monitors

  - by whtvr

  I'm having a bit of a problem with using three monitors with VMWare Workstation 10. When only two monitors are enabled in the system I have an option to "Cycle Multiple Monitors", available from the View menu (in full screen). When I enable the third monitor that option is no longer in the menu and I can only use one monitor at a time. I've found this article and a "Choose a Monitor Layout" button is mentioned there but I'm unable to see it anywhere. I'm using Windows 8.1 as the host and Ubuntu 14.04 as the guest. The graphics card is AMD Radeon R9 290x with latest beta drivers

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• Can a motherboard be faulty even if it's getting power and so are components hooked up to it?

  - by Davy8

  Sort of a followup to this question. The mobo's getting power, the lights are on. The GPU fan is spinning (it doesn't use auxiliary power, it's only connected to the mobo). I'm not getting any video signal, and it's not the video card (nor monitor) that's faulty, so I'm suspecting mobo or CPU (possibly RAM?) and I'm trying to pinpoint which part is at fault. Is the motherboard a candidate for being broken or is it not very likely if it's getting power and powering other components? The CPU fan is getting power as well.

  Read the article

• Which motherboard for Intel i7 and how to get RAID working?

  - by jasondavis

  I am wanting to build a new PC, I have a couple questions. 1) I am wanting to go with the Intel Core i7 920 Processor, can anyone reccomend a good reliable motherboard for this processor? Graphics card support does not matter (sli-crossfire). I would like to support a lot of ram, so the more ram slots the better. I have read so many bad reviews about certain boards not working good, I would love recommendation from experience. 2) I am wanting to run a couple SSD drives in RAID-0, I have never done this, will I need to purchase anything additional to the MB and CPU and drives to get raid working?

  Read the article

• Computer won't stay powered up

  - by Android

  I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

  Read the article

• Which LAN driver should I use for Asus F5Z ?

  - by Radek

  A friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed successfully all drivers from Asus driver download site. Everything is working fine but the Ethernet driver. The installation of Lan Driver for Windows XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Extract X11 configuration information from running instance.

  - by kasterma

  Since I had a hard disk die on me, I figured I could easily try some other OS (I usually run Ubuntu). Turns out that Ubuntu flawlessly recognizes my video card and monitor (X11 works right out of the box), and none of the other systems I tried gets anything working (I tried CentOS and FreeBSD). In my now working version of Ubuntu I cannot find a configuration file with information I could try to use with one of the other versions, which makes me guess that it just detects the hardware every time. Can I extract its choice for drivers and configuration options somehow (so I can try these same options in the other systems)?

  Read the article

• HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

  - by henpenben

  So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

  Read the article

• Asus V1S screen dimming randomly

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• what may cause unexpected log outs?

  - by lalebarde

  Sometimes, my Linux PC unexpectedly closes my session (log out) while I am working, and puts me back the login window. If I have terminal 1 logged with root and 2 logged with another user (without X), these ones are not logged out. For example, for the last three hours, it has happened five times. Other times, it leads to a reboot. So I have investigated: the UPS, but the behaviour is unchanged without it). the temperatures, but everything is fine (cpu, disks, video card). I have started to investigate also: the memory (partially tested - I have to run a full testyt next night). EDIT: totally tested and passed. My configuration is: Linux 2.6.37-tuxonice x86_64 Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz. Any idea please?

  Read the article

• Has anyone seen an HTTP 500 error when HTTPS traffic going through Pound Proxy forwards to an HTTP page?

  - by scientastic

  We have Varnish as our load balancer and reverse proxy cache for normal HTTP traffic. For HTTPS traffic, we use Pound proxy to unwrap the SSL and forward to Varnish, which then forwards to the back-end servers. This is used for our "checkout" process to encrypt credit card info in transition. However, on the last stage of checkout, users are always getting an HTTP 500 (Internal Server) error. It doesn't seem to be due to our back-end app server, by all tests I've tried. Does anyone know anything about how that transition works-- the transition back from HTTPS to HTTP and the interaction between Pound and Varnish-- and why it might cause 500 errors?

  Read the article

• MATLAB: What is an appropriate Data Structure for a Matrix with Random Variable Entries?

  - by user568249

  I'm currently working in an area that is related to simulation and trying to design a data structure that can include random variables within matrices. To motivate this let me say I have the following matrix: [a b; c d] I want to find a data structure that will allow for a, b, c, d to either be real numbers or random variables. As an example, let's say that a = 1, b = -1, c = 2 but let d be a normally distributed random variable with mean 0 and SD 1. The data structure that I have in mind will give no value to d. However, I also want to be able to design a function that can take in the structure, simulate an uniform(0,1), obtain a value for d using an inverse CDF and then spit out an actual matrix. I have several ideas to do this (all related to the MATLAB icdf function) but would like to know how more experienced programmers would do this. In this application, it's important that the structure is as "lean" as possible since I will be working with very very large matrices and memory will be an issue.

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

• Random BSOD ntoskrnl.exe (Windows 7)

  - by nordbjerg

  I get BSOD at random times and have been for a while now on my Windows 7 machine. It is really new, and I already tried wiping the graphic card drivers and installing them again (making sure that they are of course up to date). I get a variety of bug check strings on a few different drivers. The single file that is in all of my BSODs is ntoskrnl.exe Bug Check Strings - SYSTEM_SERVICE_EXCEPTION - KMODE_EXCEPTION_NOT_HANDLED - DRIVER_IRQL_NOT_LESS_OR_EQUAL - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED - PAGE_FAULT_IN_NONPAGED_AREA I would rather not resort to getting a completely new PC, as I have already thrown a lot of money on my current one. Here is a .zip file with my dumps.

  Read the article

• PCI IDE Controller

  - by mercutio

  I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

  Read the article

• Laptop monitor being very dark, no backlight?

  - by ldigas

  I'm asking for a diagnose of what is probably the problem. Here goes ... laptop monitor (hp 6715s) went dark. I'm using also an external monitor with the laptop, and since it kept its picture, I'm guessing it's not the graphics card. When the night came, and I turned on my desk lamp, I noticed that the laptop monitor is not really not showing anything, but is actually showing my desktop picture - only it's very very very dark. You cannot see anything on it, unless the lamp is focused on it, then you can see the picture, only very dark. Does anybody have any clue what it could be? I'm just looking for informed guessed here, so I have at least some idea of where the problem lies. The closest repair shop is quite some distance away, so going for a bit of self-diagnose before thinking of taking it to them.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Dual 9500GT video cards, one works

  - by bossDub

  I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >