Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 210/365 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Leapfrog Crammer won't mount as a USB flash drive

  - by William

  I can't seem to get the Leapfrog Crammer study and sound system to show up as a flash drive under ubuntu so I can transfer stuff to it. I don't want to install the leapfrog bloatware, can someone help me with this? Additional Information: When I plug my crammer into my computer it shows a 1 MB file system with a link to download the crammer software. I want to know how to access the rest of the crammer's file system so I can transfer music to it. The crammer does not show any other partitions in natulius. According to an article on the internet, the crammed is divided into three partitions: One with a link to install the crammer software, one with all content(music, flash cards, etc.) and one for firmware. I want to know how to access the one with the content so I can add music to the player. Can anyone help me with this? Thanks in advance.

  Read the article

• Why can't I access hw:1,0 until gstreamer-properties is run once?

  - by Shadd

  Not necessarily an Ubuntu-specific question but I wasn't sure where else to ask. I have an AverMedia DVD EZMaker 7 which plugs into USB and works well on Ubuntu 12.04. I downloaded and installed the official drivers without error. However, when I try: gst-launch alsasrc device="hw:1,0" ! alsasink device="hw:0,0" it tells me: Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstAudioSrcClock which is the normal output, however there is no audible sound. Trying the command again doesn't help. If I run gstreamer-properties and close it right away (don't need to touch any controls), THEN the gst-launch command works. If I unplug the device and plug it back in or restart the computer, I have to run gstreamer-properties again. What is gstreamer-properties doing that enables the audio?

  Read the article

• How to get several frequency ranges at the same time in fmod?

  - by Rootosaurus

  After reading documentation and tutorials about fmod I still have a question about frequency ranges. I've found how to get a frequency range using low and high pass DSP at the same time on the main channel, but I can't find how to get several ranges at the same time. For example I want, for a specific phase of my game, to hear range 400 to 600Hz and 1000 to 2000hz of the same sound. I tried to create a channel by range, but it doesn't seem to work (or maybe I do something wrong). How can I do that ? Thank you

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• What is the difference between Indicator Plugin and Notification Area?

  - by Angelo

  I don't really understand why Ubuntu has two "notification area" style things that seem to serve the same functionality. I can't use only one because some of the programs seem to only work with Notification Area (e.g. Orage) and some only work with Indicator Plugin (e.g. indicator-sound). I noticed that the network manager applet will prefer to insert itself into Indicator Plugin and if that isn't available, try Notification Area. I don't understand why we have/need both? Is it normal to keep both running?

  Read the article

• kubuntu 12.04 runs slowly

  - by randy

  i have a 3ghz amd 64 dual core am3 socket processor, asus mom board, 4GB ram, 8800GTS nividia video card with 500MB ram. installed kubuntu 12.04 and very laggy. select menu and 20 seconds later the menu pops up. i switched to classic menu and that seemed to help. what direction should i look first to get this running better? video perhaps? i had ubuntu 11.04 on this machine previously and had no problems with speed.

  Read the article

• Installed Ubuntu on a macbook pro and am running into errors with internet

  - by user209270

  I recently installed Ubuntu (64 bit, 12.04) on a mid-2012 Macbook Pro, and I've been having some really annoying issues. Chief among them is that my wireless doesnt seem to function properly. I've installed Ubuntu on this mac before, and again this time the drivers for the wireless card were missing. I, using something along the lines of sudo su apt-get update apt-get upgrade apt-get b43-fwcutter firmware-b43-installer A new problem I've been experiencing however is that none of the networks available in my home show up. I've been able to connect theto themm by going into "Connect to hidden networks" and typing in the network name and password, but when I restart the computer my network (let's just name it "Network1"), doesnt show up. I tried going into "Edit Connections" and it shows up in the wireless tab, but it is never connected to automatically or shows up in the drop-down menu. Any help?

  Read the article

• Lenovo g510 webcam not detected

  - by user280433

  I have lenvo g510. Cheese and guvcview don't detect my webcam. Its my lsubs: Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub How to fix it?

  Read the article

• Fan working non-stop on a Dell Inspiron 5110

  - by cankemik

  First of all i'm new at ubuntu. I've only tried 11.10 before 12.04. Since then my notebook's(Dell Insprion 5110) fan was working non-stop. And also battery lasts in 2 hours. So i made a research. Some said it's about graphics card driver. I've tried so many things, so many codes but i get no result. I must say that i've tried ironhide and bumblebee. non of them worked 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff)

  Read the article

• Ask the Readers: What Are Your Must Have Presentation Tools?

  - by Jason Fitzpatrick

  Giving a presentation, be it in front of the Board of Directors or a roomful of students, has come a long way from paper handouts and poster boards. This week we want to hear about your must-have presentation tools. Whether your must-have tool is a piece of hardware, an application, or a web-based tool, we want to hear all about it. Sound off in the comments with your favorite presentation tool and how it helps you present better. Make sure to check back in on Friday for the What You Said roundup to scope out your fellow readers’ tips and tricks. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• Nifty gui hide/show image

  - by Mario

  I have a simple screen made with Nifty gui. On this game screen I want to put a simple image controls sound: just on and not. So I have two images to switch and get music stop or run. Problem is: how can I hide/disply an image with nifty gui? Here my java code when player click on image: Screen screen = nifty.getCurrentScreen(); Element el = screen.findElementByName("iconOn"); el.setVisible(false); el = screen.findElementByName("iconOff"); el.setVisible(true); This code doesn't work :( Thanks to everyone could help me

  Read the article

• How do professional games avoid showing pixel seams in adjacent mesh boundaries due to decimal imprecision?

  - by ufomorace

  Graphics cards are mathematically imprecise. So when some meshes are joined by their borders, the graphics card often makes mistakes and decides that some pixels at the seam represent neither object, and unwanted pixels appear. It's a natural behaviour on all graphics cards. How are such worries avoided in Pro Games? Batching? Shaders? Different tangent vectors? Merging? Overlaping seams? Dark backgrounds? Extra vertices at borders? Z precision? Camera distance tweaks? Screencap of a fix that ended up not working:

  Read the article

• Creating a WARP device in managed DirectX

  - by arex

  I have a very old graphic card that only supports shader model 2, but I need shader model 3 or up for the app I am developing. I tried to use a reference device but it seems to run very slowly, then I found some samples in C++ that allows me to change to a WARP device and the performance is good. I am using C# and I don't know how to create such type of device. So the question is: how do I create a WARP device in C#? Thanks in advance.

  Read the article

• Install Ubuntu on iMac 21.5" (mid 2011)

  - by Mystic Mark le Maverick

  I has a dual boot system with MacOSX 10.8.2 and Microsoft Windows 7 Home Premium x64. I would like to install Ubuntu alongside the two existing operating systems for cross platform development purposes. My System specs are listed below. iMac 21.5-inch (mid 2011) Intel Core i7 @2.80GHz AMD Radeon HD 6770M Facetime HD Internet Camera Thunderbolt port Wireless Airport adapter card Apple 8x Superdrive Apple Magic Mouse and wired keyboard with numeric keypad Will rEFIt install properly on my machine too? Thanks you very much for the help.

  Read the article

• Can't boot - "Waiting for Network Configuration"

  - by user213017

  After an update on 13.10, my PC won't boot Ubuntu any longer. It displays the infamous "Waiting for Network Configuration" message and then hangs. I can go into recovery mode, and choose "Start networking" and then go to a root prompt, and that works fine. Ping works. /etc/network/interfaces contains just the two lines "auto lo" and "iface lo inet loopback". I've double-checked that my network is working, the cable is working (it works on another PC) and the network card seems to indicate a connection. Any suggestions on how to get my PC booted again? Right now I'm limited to a root shell prompt.

  Read the article

• huwai 1731 ( mobile broadband ) not working with dell inspiron 3521

  - by N.Ramkumar

  Please help, one of my friend shared this note ( enclosed below), I used these codes and my laptop is able open the data card but I am not getting any signals. I am able to work with wired connection, but wi-fi and mobile broad band are not working. Please help. sudo apt-get purge usb-modeswitch sudo apt-get update sudo spt-get install usb-modeswitch sudo apt-get update gksudo gedit /lib/udev/rules.d/40-usb_modeswitch.rules Once you enter these above commands 40-usb_modeswitch.rules text file will open. Then, copy below mentioned lines into 40-usb_modeswitch.rules text file. #Huawei E1731 ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1446", RUN+="usb_modeswitch '%b/%k'" Save the file Then type : sudo apt-get update Then restart the machine.

  Read the article

• My webcam stopped working, how do I fix it?

  - by Delilah

  I'm using Ubuntu 10.10 on a new Compaq Presario CQ56. The webcam was working fine for the first two days, in both Skype and Cheese, but simply turned black with thin vertical lines in the middle of a Skype call and now refuses to work in any program, including gstreamer-properties, Cheese, and VLC. It gives a black screen when rebooted into a live CD and tested. When tested, it either shows a plain black screen or black with thin vertical lines. Attached is an image of the video shown (it is static, there is no noise or static, and no response to variance in light). Also, when I play music or sounds, it makes a garbled noise related to the sound being played, which may or may not be connected to the webcam issue. If anyone has any ideas on what caused this, or whether it's a hardware or software issue, or how to fix it, I would appreciate them very much, Thanks

  Read the article

• Ubuntu 10.10 screen goes nuts and unreadable

  - by ChazD

  Running Ubuntu 10.10 in its own partition, also have Oracle Virtualbox 4 with Windows XP. Because i previously had a problem with a dark screen when i let the laptop on and i didn't use it for a long while i had set Power settings to Never sleep, never let the Display sleep. Monitor on install set to Laptop resolution 1400 by 1050, refresh rate 60 Hz, rotation Normal. The problem was when the computer was left on and i returned after about an hour, the screen was unreadable, similar to what used to happen to graphics cards before multisync became normal. So it appears as though the graphics card was asked to use a resolution it couldn't handle and went nuts. I had to power off the system, on restart everything was fine. Thanks for any suggestions. ChazD

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• No background/wallpaper in Ubuntu 12.04 - what to do?

  - by magnesus

  This is how my desktop looks like after moving Firefox window arround: The background just doesn't redraw, there is no wallpaper. It is like that since update to 12.04 - it was the same in 11.10 but I had special intel drivers then that fixed this problem. Doesn't seem to be fixed in 12.04 even with the ppa I was using then. What can I do? I couldn't find anything about it on Google because results were unrelated. :( I have Samsung RF-511 notebook with Nvidia card turned off - so it's using only Intel from i7.

  Read the article

• Flashing screen hovering over menubar on left side

  - by iwekb

  Just installed Ubuntu 10.10 netbook version on an older Dell Laptop (no other operating system installed). When hovering with mouse over menu bar, the full screen changes to default coloured back ground shortly and then back to normal (as after start-up) again. And that each time the mouse is over any of the (default) icons on the menu bar. I am not able to select any icon. No left or right click works on icons or anywhere on the menubar apart from the left top small icon, white Ubuntu logo, and the right top small icons for WiFi, sound, mail, shut-down etc. Those icons work. I tried re-installation again and all patches are downloaded. Same problem. Problem is that I can't enter commands either to reduce e.g. the swappiness (if that would be of any help). Can somebody help me that encountered similar problem or knows a resolution?

  Read the article

• How do I get a Realtek Wireless USB Airlink101 AWLL5088 working?

  - by Tobias_Mann

  I am running Ubuntu 11.10, 32bit. I ordered them a Realtek Airlink101 AWLL5088 based upon the relative ease for linux installation. I am having trouble installing the drivers. I copied the drivers to /usr/src/ and ran sudo ./install.sh from that director listed above. I have tried ndiswrapper, and allowing the default drivers, but with no luck. It seems to continue to try and use the default free drivers, even though I have blacklisted them using the guide described here. There was no error, I was asked which card I was using. I looked at the packaging and at the support page, and guessed number 2, allowed to finish, and rebooted. It continued detect the wireless network after the reboot, but would never complete the connection. I would appreciate any feedback. I am kind of stuck trying to figure this out.

  Read the article

• Ubuntu display - no existent

  - by Patrick M

  My HP Pavillion Dv5 1004nr worked great with Ubuntu up until 11.04. Now, ever since Unity desktop environment the display has been sporadic at best. I was told that the video driver bugs (known and largely ignored) were fixed for the ATI raedon card in my laptop with 13.04. So I installed it. 13.04 doesn't even detect the display. Boots to black screen every time now. Is there ever going to be a fix for the AMD architecture with ATI raedon chipsets? do the developers even care? this has been an issue for years, and no sign of a fix in sight....

  Read the article

• HD 6770M low graphics mode after update (AGAIN)

  - by Pihkal

  I have Ubuntu 12.04 LTS (re)installed on this laptop: I've also installed the fglrx-drivers for my ATI card (using apt-get),it appeared to work fine,that is until i updated my distro. Once again i got the "low graphics mode" error when i booted into the new kernel,booting in the old kernel works fine however. When i look into the logs i see "no screen found". This is the second time i install Ubuntu and the second time i run into problems with my graphics. Reinstalling isn't a solution since the problem keeps comming back. My question now is: does anyone know a REAL solution for this issue ar at least knows what's causing it? Any help would be greatly appreciated.

  Read the article

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >