Search Results

Search found 27800 results on 1112 pages for 'state machine'.

Page 210/1112 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

  • Why does this monitor go to sleep but won't wake up, event though all related power options are turned off?

    - by VoidKing
    We have a machine, Windows 7 (64-bit) with ASUS motherboard, in our building that only sometimes seems to go to sleep, but won't wake up. The machine is still running but shaking the mouse or hitting keys on the keyboard won't wake it up. I have tried for days to isolate the problem, but every time we get to a "let's try this" scenario, it happens again, later. All power options related to display being off are set to never, except the simple, "turn display off after..." setting. That is, the hard drive is set to never turn off, and the computer is set to never sleep nor hibernate. All drivers seem to be up to date, but I am afraid I will hose the machine if I do a BIOS update (plus I figured that will probably have nothing to do with the issue and only make something else break). Wasn't sure if there was something obvious I was missing?

    Read the article

  • How can I see logs in a server after a kernel panic hang ?

    - by Low Kian Seong
    I am running a production gentoo Linux machine, and recently there was a situation where the server hung in my co-located premises and when I got there I noticed that the server was hung on what appeared to be a kernel panic hang. I rebooted the machine with a hard reboot and was disappointed to find out that I could not find a shred of evidence anywhere on why the machine hung. Is it true that when I do a hard reboot the messages itself will get lost or is there a setting I can do somewhere say in syslog-ng or maybe in sysctl to at least preserve the error log so that I can prevent such mishaps from happening in the future ? I am running a 2.6.x kernel by the way. Thanks in advance.

    Read the article

  • Ubuntu OpenLDAP and Mac OS X Roaming Profiles

    - by Sam Hammamy
    Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

    Read the article

  • USB key to pass password in Centos 6

    - by Andrew
    I had a room mate that put a livecd in my desktop and looked around on my machine. I caught him in the act and threw him out. I haven't had a room mate for a while now and so as to avoid the livecd issue again I encrypted the hard drive, the machine is running centos 6.3. Is there anyway that I can avoid typing the password in each time if I have usb key in the machine to feed the password to the system? Additional question. Is there anything you can suggest to solve the problem I have ? Thanks

    Read the article

  • What Problems Are Better Solved By SOAP Over REST?

    In the battle for web service supremacy SOAP and REST have been battling for years. In my personal opinion this debate should have never existed. Yes, both forms can be used to create an interactive web service, but each form of a service was developed independent of each other to solve two different yet similar problems. Based my research and experience I would have to say that REST should be the preferred web service methodology and SOAP should only be used in specific situations. Note, I did not say that I was against SOAP, and in fact I actually like to use SOAP when it is needed. Criteria for using SOAP: Does the service need a guaranteed level of reliability and security? Did the provider and consumer of the service agreed on a standardized data exchange format? Does the service need data context and state management? If you answer yes to any of these questions, then you may want to consider SOAP as the format for the web service. Another way to look at the relationship between REST and SOAP is to look at the medical field.  For most things a general doctor or you family health care provider can acceptably treat most conditions from the case of a common cold to a broken bone. A general doctor more aligns with REST in my opinion because for most service requirements REST fulfills a projects needs, but what happens if you need more of an advanced examination, you would go to a specialist. A specialist would already have experience dealing with specific issues that you are experiencing giving them specific context to how best treat you going forward. SOAP acts more like a specialist doctor giving that they understand the context of an issue and can treat it based on the state of other patients they have already treated. An example of where I would use SOAP over REST in real life would be a single sign-on application. I n these cases I need to check validate a username and password for authentication and authorization of a web page request. This service would need to maintain state while it authenticated a user and while it validated access to a web page on a subsequent request. This service must process every request for access and not allow caching to ensure that every request is processed and the appropriate users are allowed to view selected web pages. References: Rozlog, M. (2010). REST and SOAP: When Should I Use Each (or Both)? Retrieved 11 20, 2011, from Infoq.com: http://www.infoq.com/articles/rest-soap-when-to-use-each

    Read the article

  • ANNOUNCEMENT: Oracle VM 3 Templates Available for Oracle Secure Global Desktop 4.62

    - by Mohan Prabhala
    Today, we are proud to announce the general availability of Oracle VM 3 templates for Oracle Secure Global Desktop version 4.62.  With Oracle VM 3 templates, anyone using Oracle VM 3 need not download, install and configure the Operating System and product(s) individually. In this case, the supported operating system (Oracle Linux 5.7) and Oracle Secure Global Dekstop 4.62 product is packaged together into a template that one can easily import and clone as a VM into Oracle VM 3. This results in a nearly instant deployment and configuration of Oracle Secure Global Desktop within Oracle VM 3.  This means drastically reducing the evaluation and deployment time for Oracle Secure Global Desktop when leveraging Oracle VM 3. Feel free to give it a try! Login into the Oracle VM section at Oracle Software Delivery Cloud  (click on 'Cloud Portal (Main)' at the top-right) and: Under Oracle VM templates - x86 64-bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86_64 (64 bit) Oracle Secure Global Desktop 4.62 template for x86_64 (64 bit) with Oracle Linux 5.7 Under Oracle VM templates – x86 32 bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86 (32 bit) Oracle Secure Global Desktop 4.62 template for x86 (32 bit) with Oracle Linux 5.7 Download any of the above templates. Once you are done, you must First import the assembly (ova) file that you downloaded from Oracle Software Delivery Cloud Next, create a virtual machine template from the assembly And finally create a virtual machine from the template. Once the virtual machine is created and starts up, be sure to configure the networking parameters (hostname, IP address, netmask, gateway etc), and optional user parameters correctly. You must also enter a root password during first boot. And that's it - the Oracle Secure Global Desktop install script will pick up the networking parameters, prompt for confirmation and complete a default installation. Once the installation is complete, you may want to refer to the Oracle Secure Global Desktop Administration Guide to learn more about Oracle Secure Global Desktop and its capabilities.

    Read the article

  • VirtualBox networking problem, host XP, guest Debian

    - by Silma
    Hi, I'm trying to set up a development environment in a virtual machine on my laptop, with debian os. I have both lan and wlan available on the host machine, yet I can't connect to the internet using either. As I said the host OS is windows XP and the guest OS will be the latest Debian, we downloaded the business card net install so we need internet access from the beginning, besides we need the virtual machine to be visible on the local network (for my fellow developers). We tried host-only networking, NAT, bridging, with proxy (the local network uses a proxy to connect to the internet) and without proxy, nothing seems to work. What else can we do? Thanks a lot.

    Read the article

  • Using The Windows Server AppFabric Cache with ASP.NET

    Did you know that you can use the AppFabric Cache with ASP.NET?  AppFabric Cache provides an ASP.NET session state provider.  There are a number of reasons that you would want to consider using the AppFabric Cache instead of other caching technologies, including the built in ASP.NET caching. The AppFabric Cache provides a number of benefits to ASP.NET programmers.  When web applications need to maintain state, especially across a Web Farm, or needs to maintain objects across restarts...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Windows 7 recognises the wrong router.

    - by Henry
    I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Need advice on design in Ruby On Rails

    - by Elad
    For personal educational purposes I am making a site for a conference. One of the object that exist in a conference is a session, which has different states and in each state it has slightly different attributes: When submitted it has a speaker (User in the system), Title and abstract. When under review it has reviews and comments (in addition to the basic data) When accepted it has a defined time-slot but no reviewers anymore. I feel that it is not the best thing to add a "status" attributes and start adding many if statements... So I thought it would be better to have different classes for each state each with it's own validations and behaviors. What do you think about this design? Do you have a better idea? *I must add this out of frustration: I had several edits of the question, including one major change but no one actually gave any hint or clue on which direction should i take or where is a better place to ask this... Hardly helpful.

    Read the article

  • Entity Type specific updates in entity component system

    - by Nathan
    I am currently familiarizing myself with the entity component paradigm. For an example, take a collision system, that detects if entities collide and if they do let them explode. So the collision system has to test collision based on the position component and then set the state of those entities to exploding. But what if the "effect" (setting the state to exploding) is different for different entities? For example, a ship fades out while for an asteroid a particle system must be created. Since entities and components are only data, this must happen in some system. The collision system could do it, but then it must switch over the entity type, which in my opinion is a cumbersome and difficult to extend solution. So how do I trigger "entity type dependend" updates on an entity?

    Read the article

  • How do I connect to a remote desktop connection to access files but not graphically

    - by user26453
    Is there any way to connect to a remote Windows server via RDP but not graphically? What options do I have simply to connect to a remote Windows machine and access my files, but not have to do it via a graphic interface. i.e. is there an equivalent of SSH or SCP (file access is really what I'm looking to do) for Windows? I will add the caveat that I do not manage the machine, so installing any services would probably not be kosher, although I do have administrator access to the machine.

    Read the article

  • Wireless Problem on Acer Aspire 5610z

    - by Ugur Can Yalaki
    I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

    Read the article

  • ssh all machines behind a router

    - by Luc
    Hello, I have several machines on my lan. One is used as a http proxy to target web sites located on the others (that's working fine now thanks to ServerFault). On my router, Port 22 is NATed to this proxy machine. I would like to be able to access the other machines, within internet, with something like: ssh user@first_machine.my_domain.tld ssh user@second_machine.my_domain.tld Could I use the proxy machine to 'filter' the incoming ssh request and to route them to the correct machine ? (in the same way it's possible to do so for web sites using a mix of mod_proxy and namevirtualhost in Apache) Thanks a lot, Luc

    Read the article

  • What is the best way to clone Win7 machines?

    - by John Hoge
    I'm looking to buy 5 new Win7 boxes and would like to ease deployment by cloning the OS. What I would like to do is install a fresh OS (Dell doesn't seem to sell machines without preinstalled crapware anymore) and then install a few apps on the first one. Once it is just right, I want to clone the OS and install the image on the other four machines and just change the machine name. Is this possible to do without any extra third party software? What I am thinking of doing is backing up the disk image of the first machine to a network share, and then booting the others to the windows install DVD and restoring the same image on each machine. Has anyone had any luck with this technique?

    Read the article

  • Install mountain lion by using the .dmg from installer app

    - by Leonardo
    I already have a Mountain Lion Installer app, downloaded from Apple Store. Now, I would like to install ML on another machine I own. I didn't want to download it again, so I copied the .app to the other machine and try to run. Unfortunately due to some error about mac unable to run the .app I wasn't able to install. Most tutorial suggest to make a bootable USB starting by the installer InstallESD.dmg, found in installer .app. I would like instead to run the .dmg directly. So I have three 'propedeutic' questions: can I just mount and run the .dmg without making a bootable drive ? I do have backup, a TimeCapsule one to be precise. In case of failure, can I just use the previous backup, and restore to Lion 10.7 ? from 'Apple Store point of view', would my machine be recognized as upgraded and elegible for future update ?

    Read the article

  • Upgraded from VS 2008 -> VS 2010. Can't Connect to SQL Server in Staging Environment

    - by Bob Kaufman
    I have a test application written in C#/ASP.NET that I've developed using Visual Studio 2008 Professional/.NET 3.5 which connects to a local SQL Server 2008 Express instance. I upgraded the development machine to Visual Studio 2010 Professional maintaining .NET 3.5 and everything in the development environment continues to work correctly. Upon deployment of the new app to an internal staging machine, that app cannot connect to its local SQL Server 2008 Express database. I get the customary "server not found" error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible... Does something need to be upgraded on the staging machine to be able to host a Visual Studio 2010/.NET 3.5 application?

    Read the article

  • How to run boot loader in VMWare?

    - by Asim Haroon
    I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

    Read the article

  • VMWare Workstation Performance

    - by tekiegreg
    Hi there, awhile ago I upgraded my laptop to Windows 7 x64 from Windows XP 32 bit edition. However not before virtualizing the physical installation and I continue to run it under VMWare Workstation today. The performance on the resulting VM is just absolutely atrocious! I've done a lot of uninstalling stuff that's not longer needed since the machine is virtual in an effort to reduce RAM, but in general the responsiveness seems sluggish. I also run the Virtual Machine on it's own separate HD that is seldom used by the host OS. I'm just hoping for some general tips in increasing VMWare performance anywhere, thoughts? EDIT: Both of the below answers were excellent starting points for me. However I did like the selected answer's strategies on disk management. I am running the Virtual Machine in a separate external hard disk, likely I'm going to have to reconfigure somehow. Thanks all!

    Read the article

  • What are current Biggest Challenges faced by Ecommerce Applications ?

    - by Rachel
    I am in the process to start Product Development for E-commerce and Online Retail domain but before starting I would like to know what are the biggest challenges faced by current state of Art E-Commerce Application ? Also I have not experience building e-commerce products and so what things should I keep in mind before developing one ? Is there are books, articles, blogs outside which I should refer to gain some knowledge before starting out ? Update: What are you thoughts on the recommendation engines for ecommerce applications ? What challenges we have with current state of recommendations engines for ecommerce web application and how can we overcome them ?

    Read the article

  • Low-level GPU code and Shader Compilation

    - by ktodisco
    Bear with me, because I will raise several questions at once. I still feel, though, that overall this can be treated as one question that may be answered succinctly. I recently dove into solidifying my understanding of the assembly language, low-level memory operations, CPU structure, and program optimizations. This also sparked my interest in how higher-level shading languages, GLSL and HLSL in particular, are compiled and optimized, as well as what formats they are reduced to before machine code is generated (assuming they are not converted directly into machine code). After a bit of research into this, the best resource I've found is this presentation from ATI about the compilation of and optimizations for HLSL. I also found sample ARB assembly code. This sort of addressed my original curiosity, but it raised several other questions. The assembler code in the ATI presentation seems like it contains instructions specifically targeted for the GPU, but is this merely a hypothetical example created for the purpose of conceptual understanding, or is this code really generated during shader compilation? If so, is it possible to inspect it, or even write it in place of the higher-level syntax? My initial searches for an answer to the last question tell me that this may be disallowed, but I have not dug too deep yet. Also, along the same lines, are GLSL shader programs compiled into ARB assembly code before machine code is generated, and is it possible to write direct ARB assembly? Lastly, and perhaps what I am most interested in finding out: are there comprehensive resources on shader compilation and low-level GPU code? I have been unable to find any thus far. I ask simply because I am curious :)

    Read the article

  • Cocos2d-x 3.0 animation frame by frame

    - by Narek
    As I know animations are actions. Now I need to play animation frame by frame. Say I have an animation from N frames. each frame should be played after t delay. Now I want to play animation frame by frame, each frame advance the animation's state. How I can do this? And what about playing actions frame by frame advancing the state in general. I ask because I use ECS, and I deal with frames. P.S. I want to do something like this: Action * a = MoveTo(initialPoint, finalPoint, durationOfAnimation); a->play(0.001 seconds); a->play(0.003 seconds); a->play(0.02 seconds); a->play(0.67 seconds); a->play(0.06 seconds); And see the animation.

    Read the article

  • Splitting up a Rails/Ruby app onto multiple servers

    - by craig.kaminsky
    We recently moved a large application to two machines, both running the same codebase. I. Machine A Web server for public facing application Receives web hook call backs from our ESP Handles a few large, list-processing jobs (uploaded spreadsheets with data) II. Machine B Manages a massive set of (background) jobs but, primarily, focuses on building and assembling newsletters Runs all integration with our NetSuite platform Runs all system maintenance (read: DB) jobs To me, having these two apps running the same codebase (a large, monolithic Rails application) seems 'wrong'. I am wondering if anyone has advice on how to better break up the code for these two apps. While they both need the same DB and, ultimately, the same model code, Machine B has no need for Controllers and Views and it feels wasteful running a full-stack Rails app for its tasks. A couple things came to mind but I'm not sure if I'm trying to solve a problem that doesn't exist: Break the models out into a sub-module on git and include into both apps Build out the Mahcine B app in plain Ruby or a lighter framework like Sinatra (where I could use ActiveRecord with Sinatra in combo with a sub-module for the model folder). I'm new to this scenario and appreciate any and all feedback or direction! Thank you.

    Read the article

  • It is possible to hibernate an LXC container?

    - by Jo-Erlend Schinstad
    I know about lxc-freeze and lxc-unfreeze, but as I understand it, these simply pauses the container, similar to sending SIGSTOP and SIGCONT to a process. If I reboot the host, then the containers will cease to exist, right? I would really like a way to save state to persistent storage so that I could resume them at some later time, even the host is rebooted or something like that. I can achieve exactly what I want using VirtualBox by using the "Save machine state" mechanism, but if I could do it with LXC, it would be completely awesome.

    Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >