Search Results

Search found 54052 results on 2163 pages for 'run configuration'.

Page 211/2163 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Setting up a VPN connection to Amazon VPC - routing

  - by Keeno

  I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

  Read the article

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• Adding and accessing custom sections in your C# App.config

  - by deadlydog

  So I recently thought I’d try using the app.config file to specify some data for my application (such as URLs) rather than hard-coding it into my app, which would require a recompile and redeploy of my app if one of our URLs changed.  By using the app.config it allows a user to just open up the .config file that sits beside their .exe file and edit the URLs right there and then re-run the app; no recompiling, no redeployment necessary. I spent a good few hours fighting with the app.config and looking at examples on Google before I was able to get things to work properly.  Most of the examples I found showed you how to pull a value from the app.config if you knew the specific key of the element you wanted to retrieve, but it took me a while to find a way to simply loop through all elements in a section, so I thought I would share my solutions here.   Simple and Easy The easiest way to use the app.config is to use the built-in types, such as NameValueSectionHandler.  For example, if we just wanted to add a list of database server urls to use in my app, we could do this in the app.config file like so: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDatabaseServers" type="System.Configuration.NameValueSectionHandler" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDatabaseServers> 10: <add key="localhost" value="localhost" /> 11: <add key="Dev" value="Dev.MyDomain.local" /> 12: <add key="Test" value="Test.MyDomain.local" /> 13: <add key="Live" value="Prod.MyDomain.com" /> 14: </ConnectionManagerDatabaseServers> 15: </configuration>   And then you can access these values in code like so: 1: string devUrl = string.Empty; 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: devUrl = connectionManagerDatabaseServers["Dev"].ToString(); 6: }   Sometimes though you don’t know what the keys are going to be and you just want to grab all of the values in that ConnectionManagerDatabaseServers section.  In that case you can get them all like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: foreach (var serverKey in connectionManagerDatabaseServers.AllKeys) 6: { 7: string serverValue = connectionManagerDatabaseServers.GetValues(serverKey).FirstOrDefault(); 8: AddDatabaseServer(serverValue); 9: } 10: }   And here we just assume that the AddDatabaseServer() function adds the given string to some list of strings.  So this works great, but what about when we want to bring in more values than just a single string (or technically you could use this to bring in 2 strings, where the “key” could be the other string you want to store; for example, we could have stored the value of the Key as the user-friendly name of the url).   More Advanced (and more complicated) So if you want to bring in more information than a string or two per object in the section, then you can no longer simply use the built-in System.Configuration.NameValueSectionHandler type provided for us.  Instead you have to build your own types.  Here let’s assume that we again want to configure a set of addresses (i.e. urls), but we want to specify some extra info with them, such as the user-friendly name, if they require SSL or not, and a list of security groups that are allowed to save changes made to these endpoints. So let’s start by looking at the app.config: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDataSection" type="ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection, ConnectionManagerUpdater" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDataSection> 10: <ConnectionManagerEndpoints> 11: <add name="Development" address="Dev.MyDomain.local" useSSL="false" /> 12: <add name="Test" address="Test.MyDomain.local" useSSL="true" /> 13: <add name="Live" address="Prod.MyDomain.com" useSSL="true" securityGroupsAllowedToSaveChanges="ConnectionManagerUsers" /> 14: </ConnectionManagerEndpoints> 15: </ConnectionManagerDataSection> 16: </configuration>   The first thing to notice here is that my section is now using the type “ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection” (the fully qualified path to my new class I created) “, ConnectionManagerUpdater” (the name of the assembly my new class is in).  Next, you will also notice an extra layer down in the <ConnectionManagerDataSection> which is the <ConnectionManagerEndpoints> element.  This is a new collection class that I created to hold each of the Endpoint entries that are defined.  Let’s look at that code now: 1: using System; 2: using System.Collections.Generic; 3: using System.Configuration; 4: using System.Linq; 5: using System.Text; 6: using System.Threading.Tasks; 7:  8: namespace ConnectionManagerUpdater.Data.Configuration 9: { 10: public class ConnectionManagerDataSection : ConfigurationSection 11: { 12: /// <summary> 13: /// The name of this section in the app.config. 14: /// </summary> 15: public const string SectionName = "ConnectionManagerDataSection"; 16: 17: private const string EndpointCollectionName = "ConnectionManagerEndpoints"; 18:  19: [ConfigurationProperty(EndpointCollectionName)] 20: [ConfigurationCollection(typeof(ConnectionManagerEndpointsCollection), AddItemName = "add")] 21: public ConnectionManagerEndpointsCollection ConnectionManagerEndpoints { get { return (ConnectionManagerEndpointsCollection)base[EndpointCollectionName]; } } 22: } 23:  24: public class ConnectionManagerEndpointsCollection : ConfigurationElementCollection 25: { 26: protected override ConfigurationElement CreateNewElement() 27: { 28: return new ConnectionManagerEndpointElement(); 29: } 30: 31: protected override object GetElementKey(ConfigurationElement element) 32: { 33: return ((ConnectionManagerEndpointElement)element).Name; 34: } 35: } 36: 37: public class ConnectionManagerEndpointElement : ConfigurationElement 38: { 39: [ConfigurationProperty("name", IsRequired = true)] 40: public string Name 41: { 42: get { return (string)this["name"]; } 43: set { this["name"] = value; } 44: } 45: 46: [ConfigurationProperty("address", IsRequired = true)] 47: public string Address 48: { 49: get { return (string)this["address"]; } 50: set { this["address"] = value; } 51: } 52: 53: [ConfigurationProperty("useSSL", IsRequired = false, DefaultValue = false)] 54: public bool UseSSL 55: { 56: get { return (bool)this["useSSL"]; } 57: set { this["useSSL"] = value; } 58: } 59: 60: [ConfigurationProperty("securityGroupsAllowedToSaveChanges", IsRequired = false)] 61: public string SecurityGroupsAllowedToSaveChanges 62: { 63: get { return (string)this["securityGroupsAllowedToSaveChanges"]; } 64: set { this["securityGroupsAllowedToSaveChanges"] = value; } 65: } 66: } 67: }   So here the first class we declare is the one that appears in the <configSections> element of the app.config.  It is ConnectionManagerDataSection and it inherits from the necessary System.Configuration.ConfigurationSection class.  This class just has one property (other than the expected section name), that basically just says I have a Collection property, which is actually a ConnectionManagerEndpointsCollection, which is the next class defined.  The ConnectionManagerEndpointsCollection class inherits from ConfigurationElementCollection and overrides the requied fields.  The first tells it what type of Element to create when adding a new one (in our case a ConnectionManagerEndpointElement), and a function specifying what property on our ConnectionManagerEndpointElement class is the unique key, which I’ve specified to be the Name field. The last class defined is the actual meat of our elements.  It inherits from ConfigurationElement and specifies the properties of the element (which can then be set in the xml of the App.config).  The “ConfigurationProperty” attribute on each of the properties tells what we expect the name of the property to correspond to in each element in the app.config, as well as some additional information such as if that property is required and what it’s default value should be. Finally, the code to actually access these values would look like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDataSection = ConfigurationManager.GetSection(ConnectionManagerDataSection.SectionName) as ConnectionManagerDataSection; 3: if (connectionManagerDataSection != null) 4: { 5: foreach (ConnectionManagerEndpointElement endpointElement in connectionManagerDataSection.ConnectionManagerEndpoints) 6: { 7: var endpoint = new ConnectionManagerEndpoint() { Name = endpointElement.Name, ServerInfo = new ConnectionManagerServerInfo() { Address = endpointElement.Address, UseSSL = endpointElement.UseSSL, SecurityGroupsAllowedToSaveChanges = endpointElement.SecurityGroupsAllowedToSaveChanges.Split(',').Where(e => !string.IsNullOrWhiteSpace(e)).ToList() } }; 8: AddEndpoint(endpoint); 9: } 10: } This looks very similar to what we had before in the “simple” example.  The main points of interest are that we cast the section as ConnectionManagerDataSection (which is the class we defined for our section) and then iterate over the endpoints collection using the ConnectionManagerEndpoints property we created in the ConnectionManagerDataSection class.   Also, some other helpful resources around using app.config that I found (and for parts that I didn’t really explain in this article) are: How do you use sections in C# 4.0 app.config? (Stack Overflow) <== Shows how to use Section Groups as well, which is something that I did not cover here, but might be of interest to you. How to: Create Custom Configuration Sections Using Configuration Section (MSDN) ConfigurationSection Class (MSDN) ConfigurationCollectionAttribute Class (MSDN) ConfigurationElementCollection Class (MSDN)   I hope you find this helpful.  Feel free to leave a comment.  Happy Coding!

  Read the article

• Configuring ant to run unit tests. Where should libraries be? How should classpath be configured? av

  - by chillitom

  Hi All, I'm trying to run my junit tests using ant. The tests are kicked off using a JUnit 4 test suite. If I run this direct from Eclipse the tests complete without error. However if I run it from ant then many of the tests fail with this error repeated over and over until the junit task crashes. [junit] java.util.zip.ZipException: error in opening zip file [junit] at java.util.zip.ZipFile.open(Native Method) [junit] at java.util.zip.ZipFile.(ZipFile.java:114) [junit] at java.util.zip.ZipFile.(ZipFile.java:131) [junit] at org.apache.tools.ant.AntClassLoader.getResourceURL(AntClassLoader.java:1028) [junit] at org.apache.tools.ant.AntClassLoader$ResourceEnumeration.findNextResource(AntClassLoader.java:147) [junit] at org.apache.tools.ant.AntClassLoader$ResourceEnumeration.nextElement(AntClassLoader.java:130) [junit] at org.apache.tools.ant.util.CollectionUtils$CompoundEnumeration.nextElement(CollectionUtils.java:198) [junit] at sun.misc.CompoundEnumeration.nextElement(CompoundEnumeration.java:43) [junit] at org.apache.tools.ant.taskdefs.optional.junit.JUnitTask.checkForkedPath(JUnitTask.java:1128) [junit] at org.apache.tools.ant.taskdefs.optional.junit.JUnitTask.executeAsForked(JUnitTask.java:1013) [junit] at org.apache.tools.ant.taskdefs.optional.junit.JUnitTask.execute(JUnitTask.java:834) [junit] at org.apache.tools.ant.taskdefs.optional.junit.JUnitTask.executeOrQueue(JUnitTask.java:1785) [junit] at org.apache.tools.ant.taskdefs.optional.junit.JUnitTask.execute(JUnitTask.java:785) [junit] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288) [junit] at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source) [junit] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [junit] at java.lang.reflect.Method.invoke(Method.java:597) [junit] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) [junit] at org.apache.tools.ant.Task.perform(Task.java:348) [junit] at org.apache.tools.ant.Target.execute(Target.java:357) [junit] at org.apache.tools.ant.Target.performTasks(Target.java:385) [junit] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337) [junit] at org.apache.tools.ant.Project.executeTarget(Project.java:1306) [junit] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41) [junit] at org.apache.tools.ant.Project.executeTargets(Project.java:1189) [junit] at org.apache.tools.ant.Main.runBuild(Main.java:758) [junit] at org.apache.tools.ant.Main.startAnt(Main.java:217) [junit] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257) [junit] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104) my test running task is as follows: <target name="run-junit-tests" depends="compile-tests,clean-results"> <mkdir dir="${test.results.dir}"/> <junit failureproperty="tests.failed" fork="true" showoutput="yes" includeantruntime="false"> <classpath refid="test.run.path" /> <formatter type="xml" /> <test name="project.AllTests" todir="${basedir}/test-results" /> </junit> <fail if="tests.failed" message="Unit tests failed"/> </target> I've verified that the classpath contains the following as well as all of the program code and libraries: ant-junit.jar ant-launcher.jar ant.jar easymock.jar easymockclassextension.jar junit-4.4.jar I've tried debugging to find out which ZipFile it is trying to open with no luck, I've tried toggling includeantruntime and fork and i've tried running ant with ant -lib test/libs where test/libs contains the ant and junit libraries. Any info about what causes this exception or how you've configured ant to successfully run unit tests is gratefully received. ant 1.7.1 (ubuntu), java 1.6.0_10, junit 4.4 Thanks. Update - Fixed Found my problem. I had included my classes directory in my path using a fileset as opposed to a pathelement this was causing .class files to be opened as ZipFiles which of course threw an exception.

  Read the article

• What causes this error..please run "exec sp_register_custom_scripting 'CUSTOM_SCRIPT', your_script???

  - by larryr

  Configuration SQL 2005 (Server A) replicates to SQL 2008(Server B) which replicates to SQL 2008(Server C). I recently added a column (to Server A) to a replicated table via script & the DDL change replicated to Server B with out a problem. When the DDL change replicated to Server C, I received the error below. 'DDL replication failed to refresh custom procedures, please run "exec sp_register_custom_scripting 'CUSTOM_SCRIPT', your_script, 'EDI from xx', 'table_name_here' "and try again (Source: MSSQLServer, Error number: 21814)' These subscriptions (on Server B to Server C) were created via a script below. **exec sp_addsubscription @publication = N'EDI to XLOCX', @subscriber = N'RXLOCXS-SQLA', @destination_db = N'EDI', @subscription_type = N'Push', @sync_type = N'replication support only', @article = N'all', @update_mode = N'read only', @subscriber_type = 0 exec sp_addpushsubscription_agent @publication = N'EDI to XLOCX (Merge)', @subscriber = N'RXLOCXS-SQLA', @subscriber_db = N'EDI', @job_login = N'ROUSES.COM\RXLOCXSQLREPL', @job_password = N'XPASSWORDX', @subscriber_security_mode = 1, @frequency_type = 4, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 1, @frequency_subday = 8, @frequency_subday_interval = 1, @active_start_time_of_day =3300, @active_end_time_of_day = 235959, @active_start_date = 20070923, @active_end_date = 99991231, @enabled_for_syncmgr = N'False', @dts_package_location = N'Distributor'** GO So the million dollar question is, why do I get the error 'exec sp_register_custom_scripting 'CUSTOM_SCRIPT', your_script' when I add a column to a table in the EDI to XLOCX publication??? AHIA, LarryR...

  Read the article

• How does SWTBOT run a custom eclipse based application? I don't know how to specify my target application

  - by jlisam13

  I have an eclipse based application. I have heard of swtbot however I am having a hard time understanding how exactly does this tool run my application and how would I specify that. This eclipse based application has an executable and various configuration/plugin/features files. I have done the tutorials about swtbot and I have successfully completed them but they all just create a template application to test on. Is this even possible? If not do you guys have any alternatives for UI automation testing on eclipse based apps? Thanks.

  Read the article

• Unable to set password in IIS 8 for Domain User as ApplicationPool Identity

  - by Niels R.

  I'm trying to set a Domain User account as ApplicationPool Identity in IIS 8 (Windows 2012). When trying this using the IIS Management Console I always get an error: Value does not fall within the expected range. When trying to set the identity using appcmd.exe it fails on both the command setting the username and password or the command only setting the password. Setting the username is no problem. Trying to set both the username and password [FAIL]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.userName:DOMAIN\Username /[name='AppPoolName'].processModel.password:P4ssW0rd Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" ERROR ( hresult:80070057, message:Failed to commit configuration changes. The parameter is incorrect. ) Trying to set only the username [SUCCESS]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.userName:DOMAIN\Username Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" Trying to set the password after successfully setting the username [FAIL]: >appcmd set config /section:applicationPools /[name='AppPoolName'].processModel.identityType:SpecificUser /[name='AppPoolName'].processModel.password:P4ssW0rd Applied configuration changes to section "system.applicationHost/applicationPools" for "MACHINE/WEBROOT/APPHOST" at configuration commit path "MACHINE/WEBROOT/APPHOST" ERROR ( hresult:80070057, message:Failed to commit configuration changes. The parameter is incorrect. ) I added the Domain User to the IIS_IUSRS group and allowed it to "Log on as a service". Any suggestions what I might be doing wrong?

  Read the article

• Configuring Jenkins for running with BitBucket

  - by Claus

  I'm trying to setup Jenkins on my mac mini in order to pull my iOS project source code from BitBucket and build it automatically. I've already gone through the major well know problems generating the ssh keys,uploading them in BitBucket,performing an ssh connection by console for adding the host to the well know list (you can find all my adventure here and here). Now,there are 3 user in my system: A,B and Shared. When I installed Jenkins it automatically placed itself in Shared, but I generated the ssh keys with the user A. So just to be clear In the A home directory there is an .ssh directory with public and private keys. When I try to run by Jenkins job I get this error message: Started by user anonymous Building in workspace /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace Checkout:workspace / /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace - hudson.remoting.LocalChannel@625cb0bb Using strategy: Default Cloning the remote Git repository Cloning repository [email protected]:myuser/myproject.git git --version git version 1.8.0 ERROR: Error cloning remote repo 'origin' : Could not clone [email protected]:myuser/myproject.git hudson.plugins.git.GitException: Could not clone [email protected]:myuser/myproject.git at hudson.plugins.git.GitAPI.clone(GitAPI.java:271) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1036) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:978) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitSCM.determineRevisionToBuild(GitSCM.java:978) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1134) at hudson.model.AbstractProject.checkout(AbstractProject.java:1325) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:676) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:88) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:581) at hudson.model.Run.execute(Run.java:1516) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:236) Caused by: hudson.plugins.git.GitException: Command "/usr/local/git/bin/git clone --progress -o origin [email protected]:myuser/myproject.git /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace" returned status code 128: stdout: Cloning into '/Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace'... stderr: Host key verification failed. fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. at hudson.plugins.git.GitAPI.launchCommandIn(GitAPI.java:885) at hudson.plugins.git.GitAPI.access$000(GitAPI.java:40) at hudson.plugins.git.GitAPI$1.invoke(GitAPI.java:267) at hudson.plugins.git.GitAPI$1.invoke(GitAPI.java:246) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitAPI.clone(GitAPI.java:246) ... 14 more Trying next repository ERROR: Could not clone repository FATAL: Could not clone hudson.plugins.git.GitException: Could not clone at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1048) at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:978) at hudson.FilePath.act(FilePath.java:851) at hudson.FilePath.act(FilePath.java:824) at hudson.plugins.git.GitSCM.determineRevisionToBuild(GitSCM.java:978) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1134) at hudson.model.AbstractProject.checkout(AbstractProject.java:1325) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:676) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:88) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:581) at hudson.model.Run.execute(Run.java:1516) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:236) As you can see it fails when Hudson try to run the GIT command. The odd things is that if I try to run /usr/local/git/bin/git clone --progress -o origin [email protected]:myuser/myproject.git /Users/Shared/Jenkins/Home/jobs/myprojectAdHocBuild/workspace In my console, it works fine (after fixing a small problem relative the folder write permission with chmod) I found a post reporting a similar error which names a number of possible options but I'm not sure how to perform correctly these operations on my console. It looks like Jenkins is trying to run a command with a user which doesn't have permission to retrieve the appropriate keys from my .ssh directory.Not really sure.Maybe this output can help: MacMini:~ myuser$ ps axu | grep "/jenkins" myuser 11660 0.0 4.6 2918124 97096 ?? S 6:59pm 1:05.63 /usr/bin/java -jar /Users/myuser/Library/Caches/org.jenkins-ci.jenkins/jenkins.war jenkins 9896 0.0 9.0 2939824 188552 ?? Ss 4:06pm 17:55.91 /usr/bin/java -jar /Applications/Jenkins/jenkins.war myuser 11930 0.0 0.0 2432768 588 s000 S+ 10:28am 0:00.00 grep /jenkins MacMini:~ myuser$ ps axu | grep tomcat myuser 11932 0.0 0.0 2432768 588 s000 S+ 10:28am 0:00.00 grep tomcat MacMini:~ myuser$ I really hope to fix this problem, because I would like to write a very detailed tutorial with all the information I found disseminated around the web.

  Read the article

• This program will not run - Windows did not trust this program because its identity can't be verified.

  - by r0ca

  Hi all, I just installed Windows 7 (MSDN) on a HP Z200. When I install McAfee 8.7i, i get in the Action Center a message that I need to turn on McAfee. When I hit "Turn on", i get the following error message: Please note that this picture has been taken from Google and this is related to another program, not McAfee So McAfee is installed on 4 other Z200 with the same Windows 7. So I'm kinda clueless now. Any takers?

  Read the article

• VMWare workstation: from command line, how to start a VM in service mode (run in background)?

  - by GenEric35

  Hi, I have tried the vmrun and vmware.exe executables, but both of them start the vmware GUI when starting the VM. What I want to do is start the VM without starting the VMWare GUI. The reason I am doing this is after a few hours of idle, the guest OS becomes sluggish. It has lots of RAM but the only way I found to keep it's responsiveness optimal is to shutdown(dumps the memory) and the start; a restart of the guest OS doesnt dump the memory so I need to be able to do a stop of the VM, and then a start. So far the command I use are: C:\Program Files (x86)\VMware\VMware Workstationvmrun stop F:\VirtualMachines\R2\R2.vmx C:\Program Files (x86)\VMware\VMware Workstationvmrun start F:\VirtualMachines\R2\R2.vmx But the start command actually starts the VMWare Workstation GUI, which I don't need. I'm looking for a solution to start the VM without the VMWare Wokstation GUI, or a solution to what is causing the VM to become sluggish after a few hours of running idle.

  Read the article

• Do we need to explicitly pass php.ini's location to php-fpm?

  - by F21

  I am seeing a strange issue where my php.ini is not used if I do not explicitly pass it to php-fpm when starting it. This is the upstart script I am using: start on (filesystem and net-device-up IFACE=lo) stop on runlevel [016] pre-start script mkdir -p /run/php end script expect fork respawn exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf If PHP is started with the above, my php.ini is never used, even though it is in Configuration File (php.ini) Path. This is the relevant part from phpinfo(): Configuration File (php.ini) Path /etc/php/ Loaded Configuration File (none) Scan this dir for additional .ini files (none) Additional .ini files parsed (none) If I modify the last line of the upstart script to point php-fpm to php.ini explicitly: exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf -c /etc/php/php.ini Then we see that the php.ini is loaded: Configuration File (php.ini) Path /etc/php/ Loaded Configuration File /etc/php/php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Why is this the case? Is this a quirk in php-fpm? Minor update: This also seems to be a problem for php5-fpm installed using apt-get. I did a test install in a Ubuntu Server 12.04 virtual machine by running the following: sudo apt-get install nginx php5-fpm PHP-FPM and nginx were started after installation and everything seemed fine. I then uncommented php's settings in nginx's configuration and placed a test phpinfo() file to inspect PHP's settings. The relevant bits are: Configuration File (php.ini) Path /etc/php5/fpm Loaded Configuration File (none) Scan this dir for additional .ini files /etc/php5/fpm/conf.d Additional .ini files parsed /etc/php5/fpm/conf.d/10-pdo.ini I noted that no php.ini was loaded either. However, if I go to /etc/php5/fpm, I can see that a php.ini exists. I also checked the start up scripts for PHP-FPM and the -c parameter was not used to link the ini file to PHP. This can potentially be confusing for people who would expect php.ini to be loaded automatically by PHP-FPM.

  Read the article

• How does Microsoft Word And Excel Run without any installation?

  - by Sathya

  I was having a discussion on bookmarks in Word with a friend, and he suggested me to check out his implementation of a query in Word. Since I did not have Microsoft Word installed, I told him I don't have Word so I won't be able to test it. To this, he mentioned that he'll send the executables and it will work - I argued that without an installation this will fail. I was rather shocked when he sent me the standalone executables and on running them, Word actually launched and I was able to use almost every functionality o_0 How's this possible? I've never installed Microsoft Office on my system, this isn't any "portable" app or VMWare ThinStall ( thanks nhinkle, didn't know about this). There are absolutely no Microsoft Office related files - except for winword.exe and excel.exe. Curiously even Microsoft Excel works fine with just the standalone executable. winword.exe size is about 38 MB, and excel.exe size is just 35kb, which makes it even more strange. I'm running on Windows XP, the files were from Office 2003. I was discussing this on Chat prior to posting, here's the conversation

  Read the article

• Can I run/build Malzilla on Mac OS X?

  - by Rashal Nata

  I'd like to use Malzilla on Mac OS X but I can;t find any binaries. Would it be easy to build it for Mac OS X?

  Read the article

• How do I run a non-service program as a service on Windows 2008 Server?

  - by Lasse V. Karlsen

  I found this page that tells me how to set up Windows Live Sync as a background service on Windows 2003 Server, unfortunately the resource kit tools for 2003 that are mentioned does not work on 2008 server. http://mswhs.freeforums.org/windows-live-sync-as-a-service-on-whs-t623.html Also, apparently there is no resource kit tools downloadable for Windows 2008 Server that I can find. Perhaps someone has a link to the relevant tools? (INSTSRV.EXE and SRVANY.EXE.) Using just plain SC.EXE doesn't work as I assume that the program is then required to be a normal service, and not just any executable. What other options do I have? Can I use the task scheduler on 2008 server to start the WindowsLiveSync executable, will that work? I need the executable to stay running even after I've logged off from the server.

  Read the article

• Is it a bad idea to run an asp.net app pool with the same identity as IIS's anon user?

  - by Andrew Bullock

  Subject says it all really, Thinking on security terms, I want to give each site on my server its own user account, so that they can't access each other's data. I also want to use integrated authentication for sql so i dont have any passwords knocking about in connection strings. Is it a bad idea to use the same account for the app pool identity and the anon user account for iis (im interested in answers for both v6 and 7)? Edit: ive seen this post describing how IIS7 allows you to automatically use the same account, but the question of whether its a good idea or not remains ;) If so, why? Thanks

  Read the article

• Why does Mysql Xampp restart only when i run the mysqld.exe file manually?

  - by Ranjit Kumar

  I am using mysql-xampp v3.0.2 version. while restarting the mysql server first it show me the running status and after 2or3s it stops running automatically. So as of now i got a temporary solution like going into xampp installation folder Xampp-mysql-bin-running the msqld.exe file. i dont know whether it is the correct solution or is there any alternate solution to be made !! please suggest me errorlog 120629 15:29:59 [Note] Plugin 'FEDERATED' is disabled. 120629 15:29:59 InnoDB: The InnoDB memory heap is disabled 120629 15:29:59 InnoDB: Mutexes and rw_locks use Windows interlocked functions 120629 15:29:59 InnoDB: Compressed tables use zlib 1.2.3 120629 15:29:59 InnoDB: Initializing buffer pool, size = 16.0M 120629 15:29:59 InnoDB: Completed initialization of buffer pool InnoDB: The first specified data file D:\xampp\xampp\mysql\data\ibdata1 did not exist: InnoDB: a new database to be created! 120629 15:29:59 InnoDB: Setting file D:\xampp\xampp\mysql\data\ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... 120629 15:29:59 InnoDB: Log file D:\xampp\xampp\mysql\data\ib_logfile0 did not exist: new to be created InnoDB: Setting log file D:\xampp\xampp\mysql\data\ib_logfile0 size to 5 MB InnoDB: Database physically writes the file full: wait... 120629 15:30:00 InnoDB: Log file D:\xampp\xampp\mysql\data\ib_logfile1 did not exist: new to be created InnoDB: Setting log file D:\xampp\xampp\mysql\data\ib_logfile1 size to 5 MB InnoDB: Database physically writes the file full: wait... InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: 127 rollback segment(s) active. InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 120629 15:30:02 InnoDB: Waiting for the background threads to start

  Read the article

• eMachine W5243 won't POST; fans run but optical drive will not open.

  - by NicciAdonai

  Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

  Read the article

• How to run Android-x86 project's ISO in VirtualBox with ethernet?

  - by Shiki

  I managed to find a way just days ago, but I had to leave my other PC and now I have no clue how to get it working again. Basically you have to get the image, then install it in a VirtualBox guest. Now the problem is ... when you launch your VM, there is no internet connection. No with NAT or Bridged. Tried all the network cards too. Since internet connection is crucial for Android development, I have to get this thing working. (As I said, I managed to fix it once.) I'm using: - The 4.0 RC1 images from Android-x86 - VirtualBox - Eclipse 4.2 Juno with the latest Android ADT - Android SDK v18 - upgraded to 19 via the Package manager. Now I seen a lot of different builds on the net, about different Android builds for VirtualBox. I have checked Buildroid for example, but there is no network connection. I have imported the virtual machine just as the howto said. The extension package is also installed and it's up to date.

  Read the article

• Can you run Snow Leopard Server on a VM?

  - by Crash893

  I'm thinking of buying a mac mini server for my email needs (small office server for 999 with all the features i want build in) I wanted to give it a test drive before i commit so i was thinking "hey this sounds like the perfect job for a vm" however i havent been able to see any examples of running snow lepoard server on a vm does anyone know if its possible and/or there is a premade vm package to test it out with?

  Read the article

• Run Explorer in SYSTEM account on Windows Vista or 7 using Sysinternal’s psexec tool?

  - by Rob

  Has anyone been successful at launching an instance of Windows Explorer in the SYSTEM account on Windows Vista or 7? It is possible to do this on XP, but I haven't been able to get it to completely work in Vista or 7. Trying to launch Explorer as SYSTEM into session 1 (my user session) results in Explorer exiting immediately and returning an error code of 1. I can launch Explorer as SYSTEM into session 0 with the following command: psexec -i 0 -s explorer That will create an instance of explorer running as SYSTEM with a taskbar and start menu on the hidden session 0 desktop, but won't let you open a file browser window. If you switch to the hidden session 0 desktop and try to open an Explorer window from there to browse files, the following error message appears: "The server process could not be started because the configured identity is incorrect. Check the username and password." I have set the following registry key to 1 for my user account and the SYSTEM account: \Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\SeparateProcess There has got to be a way to make this work? If it is not possible, can anyone explain why? -Rob

  Read the article

• How to use supervisord to run a PHP script as a daemon?

  - by Alasdair

  I need to have 8 threads of the same PHP script running in the background on a server continuously (as a daemon), and each script need to be automatically restarted if it exits for any reason. I've been advised to use supervisord to do this, but I don't at all understand their documentation, which seems very complicated to me. I also want each of the 8 threads of the script to be initially started at 2 minute intervals (2 minutes in between each launch) but then after this all 8 threads of the same PHP script should continue running on the server forever (and restarting if any exit for any reason). Could someone please explain how to do this with supervisord, or any other easy way of doing it? I'm on CentOS 6. Thank you!

  Read the article

• Is it possible to run two servers in one system ?

  - by srikanth

  I have a small problem while trying to execute the wamp server. At present in my system I am running Apache server. I have a php application. for that I am trying to install wamp server in my system. wamp server is not running. I change the port no of wamp server as : in my C:\wamp\bin\apache\Apache2.2.11\conf\ I have httpd.conf file. in that I change listener and host name with another port no. then also it is not working.

  Read the article

• Is it possible to run two servers in one system ?

  - by srikanth

  hi, i have a small problem while trying to execute the wamp server. At present in my system i am running Apache server. i have a php application. for that i am trying to install wamp server in my system. wamp server is not running. i change the port no of wamp server as : in my C:\wamp\bin\apache\Apache2.2.11\conf\ i have httpd.conf file. in that i change listener and host name with another port no. then also it is not working. any one can you help me......... plz...

  Read the article

• Why does cd print when run in command substitution?

  - by reasgt

  If I use the 'cd' BASH built-in in a command substitution, it prints extra stuff to stdout, but only when piped to, eg., less. $ echo `cd .` # The output is a single newline, appended by echo. $ echo `cd .` | less # less displays: ESC]2;my.hostname.com - tmp/testenv^G (END) What's going on there? This behavior isn't documented in the bash man page for cd. Obviously, running just 'cd' in a command substitution is silly, but something like NEWDIR=`cd mypath; pwd` could be useful. I solved this by instead using NEWVAR=`cd mypath > /dev/null 2>&1; pwd` but I still want to know what's going on. Bash Version: GNU bash, version 3.2.25(1)-release (x86_64-redhat-linux-gnu) Copyright (C) 2005 Free Software Foundation, Inc. Distro: Scientific Linux SL release 5.5 (Boron)

  Read the article

• Can I run more than 4 virtual machines using Hyper-V Windows Server 2008 R2 Enterprise Edition as th

  - by James Holland

  I understand that a single Windows Server 2008 R2 Enterprise Edition license includes 4 free guest virtual machines using Hyper-V. Suppose I do that, and have 4 VMs running, but then want to expand. If I separately purchase additional Windows licenses, or I consolidate a machine with an existing license, can I spin up a 5th, 6th virtual machine (presuming there are enough CPU/RAM resources on the host)? Or does the host OS limit the number of virtual machines allowed?

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >