Search Results

Search found 6301 results on 253 pages for 'cd man'.

Page 212/253 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• will heavy network traffic affect other connections on HP ProCurve V1810-48G?

  - by nn4l

  I have a HP ProCurve V1810-48G switch with a few servers connected to it (everything in one rack). The switch is practically in its default configuration. During copying of a few hundred GByte of data from server_a to server_b (using tar cf - data | ssh server_b 'cd myhome; tar xf -'), essentially saturating the network capacity between those two servers, I noticed network related error messages on the console of server_c - as if server_c is no longer able to send/receive traffic to server_d. After canceling the copy command everything was normal again. I would understand this if the network connection would use a shared resource, for example if server_a and server_c are in one datacenter, server_b and server_d are in another datacenter and both datacenters are connected with a 100 MBit line. But all of the mentioned servers are connected to the same switch and are located in the same IP network. I always thought that a connection between two servers on one switch will not affect any other server connected to the switch. It is also possible that the network related error messages are caused by something else - but I can't risk a network problem for any other system on this switch. Please advise.

  Read the article

• Why might my Fedora 15 live USB persistent storage not work?

  - by Richard J Foster

  I created a Fedora 15 "live" USB stick using the live USB creator found at https://fedorahosted.org/liveusb-creator/ and the Fedora 15 i686 Desktop ISO image with the persistent storage space set to 4096MB. (The USB stick I have available has an 8GB capacity, so there should be plenty of space.) Fedora appears to boot correctly, however it seems that the persistent storage is not working. To verify this, I opened a terminal prompt, then did su - followed by yum update yum. As expected, I was informed that a new version was available. (The live CD contains version 3.2.29-4, at the time of typing 3.2.29-6 is the current version). After installing, I verified that the new version was installed by typing yum --version. I then shutdown the system using shutdown now. After the system had shut down, I rebooted and returned to the terminal prompt. On typing yum --version, I was informed that the version was 3.2.29-4 (i.e. the original version). Why might the persistent storage not be working? Is there anything I can do to fix it?

  Read the article

• Tridion 2011 SP1 Core Service - expose to live server within PROD env

  - by Neil

  We have a requirement to allow our users to submit information about their "projects" - a small piece of text and single image they upload. Ultimately we'll have a listing page of user contributed projects that others can comment on and rate. We've decided to user Tridion's UGC for rating & comments site-wide for this first phase which has got me thinking - UGC is tied to Tridion published pages & components, if we want UGC on our user-submitted projects, they'll have to be created within Tridion as components themselves, not be sat in some custom db table? Is this where the Core Service could come in? My understanding is that the CD Web Service is for retrieval, not for interacting with the Content Manager. Is it OK (!) architecturally to expose the Core Service only to our live application servers so our backend .NET code can create "project components" that can be then be published by editors allowing them to be commented on? Everything sounds pretty neat and tidy apart from the "exposing Core Service to live servers" bit. Without this though I'd have to write a custom way to "transfer" it back over to the Content Manager - maybe like Audience Manager Sync works? Anyone done this before?

  Read the article

• Trying to limit IMAP folders/mailboxes my iPhone/iPad sees

  - by QuantumMechanic

  (Note: I am using dovecot 1.0.10 on Ubuntu 8.04.4 LTS. Yes, I know I need to upgrade before next year :) (Note: The SMTP/IMAP server in question only serves my family, so there's only a very few users. Certainly what I propose below, even it it works, would be a logistical nightmare with any significant number of users). I have noticed (and have confirmed via google) that the iOS mail app is terrible in its handling of IMAP subscriptions, namespaces, etc. For example, my iPhone and iPad will see EVERYTHING (all mailboxes, folders, etc.), whereas clients like Thunderbird, alpine, etc. only see what I tell them to see. This makes it an incredible pain to move mail between mailboxes because I have to scroll through a gazillion things. The mail_location in dovecot.conf is: mail_location = mbox:%h/Mail/:INBOX=/var/mail/%u To get around this, I've been considering doing the following for user foo: Create a dovecot userdb with a foo-ios virtual user in it, whose UID is identical to that of the real (in /etc/passwd) foo user and with a homedir of /home/foo-ios. ln -s /var/mail/foo /var/mail/foo-ios mkdir -p /home/foo-ios/Mail cd /home/foo-ios/Mail ln -s /home/foo/Mail/mailbox-i-want-visible mailbox-i-want-visible Make symlinks for the rest of limited set of mailboxes/folders I want visible to the iOS mail app. chown -R foo:foo /home/foo-ios Change iOS mail app settings to log in as user foo-ios instead of user foo. Will this work or will there be some index/file corruption hell because there will be two sets of indexes (one set living in /home/foo/Mail/.imap and other set living in /home/foo-ios/Mail/.imap) indexing the same underlying mbox files? And I'd be more than happy to hear of a better way to do this with dovecot! (Or to hear that dovecot 2.x works better with iOS devices).

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

  - by Mehper C. Palavuzlar

  This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

  Read the article

• Disable RAID to JBOD in server IBM x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• HP DL185 - very slow disk read speed

  - by fistameeny

  Hi, I have a HP DL185 G6 Server (12 disk model) with the following spec: Quad Core Xeon 2.27GHz 6GB RAM HP P212 RAID controller with battery backup 2 x 128GB 15K SAS 3.5" (RAID-1 for the operating system) 4 x 750GB 7.5K SAS 3.5" (RAID-5 for the data, 2TB usable space) The operating system is Ubuntu Server 9.10. Both drives have been formatted as EXT4. We are finding that read speed of the RAID-5 array is poor. Disk test results below: sudo hdparm -tT /dev/cciss/c0d1p1 /dev/cciss/c0d1p1: Timing cached reads: 15284 MB in 2.00 seconds = 7650.18 MB/sec Timing buffered disk reads: 74 MB in 3.02 seconds = 24.53 MB/sec For info, the RAID-1 array performs as follows: sudo hdparm -tT /dev/cciss/c0d0p1 /dev/cciss/c0d0p1: Timing cached reads: 15652 MB in 2.00 seconds = 7834.26 MB/sec Timing buffered disk reads: 492 MB in 3.01 seconds = 163.46 MB/sec We thought this was because with no battery, read/write cache is disabled. We have bought and installed the battery backup and have used the HP bootable CD to change the cache settings to 50% read / 50% write and check cache is enabled on the drives and the controller. Is there something I'm missing?

  Read the article

• Forward secrecy in Nginx (CentOS6)

  - by Anil

  I am trying to enable Forward secrecy in CentOS with nginx webserver. What I have tried I have read some tutorials and seems like we should have nginx, openssl latest versions to enable it. So I had installed the openssl latest from source. sudo wget http://www.openssl.org/source/openssl-1.0.1e.tar.gz sudo tar -xvzf openssl-1.0.1e.tar.gz cd openssl-1.0.1e sudo ./config --prefix=/usr/local sudo make sudo make install Now OpenSSL supports the Eliptic Curve ciphers(ECDHE). I tested this with openssl s_server also. It worked well. Next, I replaced Nginx with latest. sudo wget http://nginx.org/packages/centos/6/x86_64/RPMS/nginx-1.4.2-1.el6.ngx.x86_64.rpm sudo rpm -e nginx sudo rpm -ivh nginx-1.4.2-1.el6.ngx.x86_64.rpm and configured Nginx as described in this link ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_prefer_server_ciphers on; ssl_ciphers EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA256:EECDH+aRSA+RC4:EDH+aRSA:EECDH:RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS; http://baudehlo.wordpress.com/2013/06/24/setting-up-perfect-forward-secrecy-for-nginx-or-stud/ But now Nginx does not support ECDHE ciphers. It supports DHE ciphers. I tried by just enabling ECDHE cipher in nginx still doesn't work. I am using latest web browser(chrome 29 and it support this cipher) Am i missing anything ? Or Having issues with CentOS or Nginx? I read somewhere that ECC patent issues with CentOS, is this causing problem?

  Read the article

• ADUC Exchange tabs - Windows 7 & Exchange 2003

  - by John Gardeniers

  I have the admin tools install on a Win 7 64 bit machine but would like to see the Exchange tabs in ADUC. Googling shows this is a popular request and the most common solution (and the only one which appears to work to all) is to install Exchange Server Management for Vista using esmvista.msi /q. That may well have worked on beta versions of Win 7 but is definitely not working with my OEM copy of Win 7. Can this perhaps be made to work by installing from an Exchange 2007 CD (which I don't have at this time), bearing in mind that we have Exchange 2003 only? Can someone please offer a solution that works? I figure some of you must have solved this by now. Edit: I don't know if this is relevant or not but the Win 7 machine is also running Office 2010 Pro. About the bounty I had intended to award the bounty to gWaldo for having taken the extra steps to try to help me with this issue. However, as I was about to do so my screen started scrolling and I actually clicked on the answer posted by natxo asenjo, who's answer offended me, without realising it. Perhaps if I wasn't rushing I might have noticed but that's now history.

  Read the article

• Windows 7 64 bit Installation freezes after a while durig the setup

  - by vinz243

  I have a windows 7 32 bits on my computer. Because i have 5 gb of ram (kingston) on my asus M2N motherboard and only 3 were able to be used, I bought W7 x64 and install it. It loads the wizard, but after a while, it freezes, and I have to force reboot. It first crashed while unzipping w7 files, but if I wait a while on the terms page for example, it can crash before, which make me think that it is a matter of time. I remember I had the same issue while booting on Ubuntu x64, it crashed randomly but not load completely. No bip or other messages. Configuration: Software OS (before) W7 x86 Pro New OS : W7 x64 Pro Antivirus : avast (bios verification ?) BIOS 03/27/2008 - v08.00.12 Hardware : Motherboard : Asus M2N Processor : AMD Athlon 64 dualcore @ 2.6 GHZ Memory : 5120 MB ((2 + 2) + (1)) NOTES : I ran a memory test using openSUSE cd, though i have not finished it, it ran. EDIT: I tried not to run the setup but wait, and i get the BSOD : A problem... TL;DW IRQL_NOT_LESS_OR_EQUAL If it is.. TL;DW ***STOP: 0x0000000A (0x0000000000000000,0x0000000000000002, 0x0000000000000001, 0xFFFFF8001A49ED1F)

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• Interesting phenomenom with Windows Server 2008 R2 user access controls and NTFS ACLs

  - by Simon Catlin

  One to try, and I'd appreciate any thoughts on this. On a Windows Server 2008 R2 box (or presumably 2008 R1, Windows Vista or Windows 7): i) Logon as an administrator, and create a new NTFS volume ii) Blow away the standard MS ACLS on the root of the volume (which are laughable), and replace with Administrators:Full Control, System:Full Control, e.g.: echo Y|cacls.exe d:\ /g "Administrators:F" "SYSTEM:F" iii) Now, from a Command Prompt shell window or PowerShell window, switch to that drive (cd /d D:\ or set-location D:\ ). Works fine... no issues. iv) Now, try to browse to the root of the new volume using MS Explorer... Access denied. Now, I've kind of convinced myself that it is UAC getting in the way, as you can add "Authenticated Users:List" access to D:\ and Explorer then works. I can only assume that MS Explorer isn't able to use the "admin" token for the Administrator. Browsing to explorer.exe and doing a "Run as administrator" has no effect. Any thoughts? Cheers in advance.

  Read the article

• Power issues Foxconn Barebones kit

  - by alpha1

  I have a Foxconn R20D2 bought about a year and a half ago. It ran fine for a while and then around last summer it started having power issues. I chalked it up to changes in electric current due to the overwhelmed grid when people turn on their AC units, but this problem has stayed for all year, shutting off randomly, shutting off when i turn on a vacuum and similar problems. Now that its summer again, the box basically sits there all day cycling itself, and now has gotten to the point it tried to boot and after 3 seconds, fails, shuts off and tried again. I know its power related, it runs opensuse linux and there are never any shutdown logs or anything of that sort. As the weather got hotter i noticed it happening more and more, and it most often happened in the morning, i presume as people woke up and turn on the AC. The power supply is a Chennel well technology co LTD model DSL-150. 150W max output. Its an intel atom dual core, with 2 sata drives, no CD/floppy etc, recently upgrades from 2 to 4gb of ram. It runs at 104 degrees Fahrenheit all the time almost. Any way i can test the power supply or anything else to try to fix it? Im a software guy, not hardware so im at a complete loss here, thanks for all assistance you can provide! EDIT: The switch on the back that says 230 or 115 is set to 230. If im in the USA, could that be causing the problems?

  Read the article

• Windows 7 DVD doesn't boot up, neither does USB. :'(

  - by Manan Shah

  My problem is that i'm not able to install windows 7. Been trying to install this since past 1 week. The methods i've tried are: I have a windows 7 bootable DVD which doesnt boot up. (I've set BIOS to boot from DVD ROM first but it just won't boot from the DVD). Tried to install Windows 7 from the same DVD to a friend's PC and it worked. So the DVD has no issues. I tried to run 'Setup.exe' from within the DVD. The two options pop-up 'Check compatibility' and 'Install now'. On clicking install now, after sometime, an error is encountered with the message 'Windows was unable to create a required installation folder' error code:0x8007000D. I am running Windows XP Professional and there's only one user on the PC which is the Admin, so i do not know why is the setup not getting permissions. I've also uninstalled my antivirus, CD burning software, disabled firewall and disconnected all other devices, but its still the same. I tried to install it from a USB device by making it bootable but that too doesnt work. (Yes the mobo supports booting from the USB). The problem is that XP does not recognize a 'USB' device on boot. Rather it shows this USB stick as a removable 'Hard Drive'. Furthermore, i changed the order of Hard Drive boot to boot from this removable Hard Drive first, it still boots my existing OS. Is there anything else that can be done? Any help would be greatly appreciated. :) Please ask if any other information is required, this post is becomimg increasingly long to add any other details. PS: I want to dual boot windows 7 with my existing XP, but that would be after i manage to run the windows 7 setup in the first place. PPS: Please bare with any 'not-so-technical' terms, i am a beginner with this. Again, thank you for taking the time and trying to help, really appreciate it. :)

  Read the article

• Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

  - by gts123

  I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

  Read the article

• Burners freezing the PC when starting lead write in

  - by steve

  hi guys ,am having trouble with new pioneer dvdr-219l dual layer burners ,have replaced old burners with these dual layer ones . they are sata attached ,have tried img burn, xbox360 cookie burner, dvd decrypter, dvd flick , the burners seem ok burning cd and normal dvds but when trying to burn an iso to dual layer they will both freeze at the lead in write , the pc freezes including alt/delete mouse etc so have to re-boot,have tried uninstalling all burning programs that i have to eliminate conflicts and re-installing 1 at a time to see if that was the problem , still no solution am starting to think that maybe i have a bad sata cable the pc and burners dont seem to talk to each other when trying to burn dual layer ,any suggestions ???? this problem is giving me the shits ,ran microsofts fix it program and it said i had no burners installed that were capable of burning , i have had a look at device manager and the burners are there and when trouble shooted it says they are working ok , have noticed in device manager that the driver for these burners is from B.H.A.corporation file version 8.0.0.5. copyright 2000-2006 and they are not digitally sighned these burners are the latest models so how com the drivers are so old ...help please . steve

  Read the article

• Sudden problems with iptables not running

  - by Fourjays

  I've got a sudden issue with iptables not running on my CentOS 5.8/DirectAdmin XenVPS. All I have done today is install PHP APC and run an update (although I admittedly didn't pay much attention today - I usually do). Iptables has been running fairly smoothly since I installed it over 6 months ago. Basically when I try to run iptables -L it tells me: iptables v1.3.5: can't initialize iptables table `filter': iptables who? (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I've looked around and tried a few things and it appears that maybe my kernel doesn't have the modules loaded? I've been reading this and tried the two commands they suggest to no avail. Except there does appear to be a mismatch on one bit of output: -bash-3.2# cd /lib/modules -bash-3.2# ls 2.6.18-194.32.1.el5xen 2.6.18-238.5.1.el5xen 2.6.18-274.7.1.el5xen 2.6.39.1-cs-domU 2.6.18-238.12.1.el5xen 2.6.18-238.9.1.el5xen 2.6.37.2-cs-domU 3.0.1-cs-domU -bash-3.2# depmod -a WARNING: Couldn't open directory /lib/modules/2.6.18-274.18.1.el5xen: No such file or directory FATAL: Could not open /lib/modules/2.6.18-274.18.1.el5xen/modules.dep.temp for writing: No such file or directory Does this mean the versions are out of sync? If so, what are my next steps to getting this fixed? As you can probably tell I am still learning how to manage my server so please be very clear in all advice. Many thanks :)

  Read the article

• Hadoop initscript askes password

  - by Ramesh

  I have installed hadoop on my ubuntu 12.04 single node .I am trying to execute an init script to make the hadoop run on start up but it asks password every time i execute. #!/bin/sh ### BEGIN INIT INFO # Provides: hadoop services # Required-Start: $network # Required-Stop: $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Description: Hadoop services # Short-Description: Enable Hadoop services including hdfs ### END INIT INFO PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HADOOP_BIN=/home/naveen/softwares/hadoop-1.0.3/bin NAME=hadoop DESC=hadoop USER=naveen ROTATE_SUFFIX= test -x $HADOOP_BIN || exit 0 RETVAL=0 set -e cd / start_hadoop () { set +e su $USER -s /bin/sh -c $HADOOP_BIN/start-all.sh > /var/log/hadoop/startup_log case "$?" in 0) echo SUCCESS RETVAL=0 ;; 1) echo TIMEOUT - check /var/log/hadoop/startup_log RETVAL=1 ;; *) echo FAILED - check /var/log/hadoop/startup_log RETVAL=1 ;; esac set -e } stop_hadoop () { set +e if [ $RETVAL = 0 ] ; then su $USER -s /bin/sh -c $HADOOP_BIN/stop-all.sh > /var/log/hadoop/shutdown_log RETVAL=$? if [ $RETVAL != 0 ] ; then echo FAILED - check /var/log/hadoop/shutdown_log fi else echo No nodes running RETVAL=0 fi set -e } restart_hadoop() { stop_hadoop start_hadoop } case "$1" in start) echo -n "Starting $DESC: " start_hadoop echo "$NAME." ;; stop) echo -n "Stopping $DESC: " stop_hadoop echo "$NAME." ;; force-reload|restart) echo -n "Restarting $DESC: " restart_hadoop echo "$NAME." ;; *) echo "Usage: $0 {start|stop|restart|force-reload}" >&2 RETVAL=1 ;; esac exit $RETVAL Please tell me how to run hadoop without entering password.

  Read the article

• KVM Guest Reboot Loop

  - by javano

  I have been pulled into a situation where a KVM server (CentOS 6.2) lost power and upon reboot one of the guests hasn't started up again (XP SP3). I have SSH'ed in and someone must have changed something relating to the hyper visors prior to the power loss, but not rebooted all the guests. This particular guest wouldn't start because it was configured to use /usr/bin/qemu-system-x86_64 which isn't there now (assuming it was before?). I changed it to use /usr/libexec/qemu-kvm as this is what all the other guests on this server seem to be using, and its booting up. Using virt-manager on my local machine I can connect to the display of the XP machine and it gets as far as this screen; http://support.gateway.com/emachines/issues/2-1131285152-01.gif The problem I face now, is that which ever option I choose the machine just reboots. So it's and endless loop. I thought that perhaps a file system error maybe present due to the unclean shutdown. There is an XP SP3 ISO mounted under the guest, which I booted from in an attempt to access the recovery tools, but I don't have the Administrator password! I am out of ideas, and it's turning out to be quite the conundrum. Should I use a 3rd party live CD to test the FS for errors? How else can I trouble shoot these restarts?

  Read the article

• Ubuntu network card problem.

  - by Steve Greene

  Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

  Read the article

• Startup script for Red5 on Ubuntu 9.04

  - by user49249

  I am creating startup script for Red5 on Ubuntu. Red5 is installed in /opt/red5 Following is a working script on a CentOS Box on which Red5 is running [code] ==========Start init script ========== #!/bin/sh PROG=red5 RED5_HOME=/opt/red5/dist DAEMON=$RED5_HOME/$PROG.sh PIDFILE=/var/run/$PROG.pid # Source function library . /etc/rc.d/init.d/functions [ -r /etc/sysconfig/red5 ] && . /etc/sysconfig/red5 RETVAL=0 case "$1" in start) echo -n $"Starting $PROG: " cd $RED5_HOME $DAEMON >/dev/null 2>/dev/null & RETVAL=$? if [ $RETVAL -eq 0 ]; then echo $! > $PIDFILE touch /var/lock/subsys/$PROG fi [ $RETVAL -eq 0 ] && success $"$PROG startup" || failure $"$PROG startup" echo ;; stop) echo -n $"Shutting down $PROG: " killproc -p $PIDFILE RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$PROG ;; restart) $0 stop $0 start ;; status) status $PROG -p $PIDFILE RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status}" RETVAL=1 esac exit $RETVAL [/code] What do I need to replace for Ubuntu in the above script. My Red5 is in /opt/red5/ and to start it manually I always do /opt/red5/dist/red5.sh from Ubuntu As I did not find rc.d/functions on Ubuntu on my laptop also /etc/init.d/functions I did not existed. I would like to be able to use them with service as Red hat distributions do. I checked /lib/lsb/init-functions.

  Read the article

• Dual-booting Windows 7 and Ubuntu

  - by CFP

  Hello everyone, I've just received my Dell Studio 17 laptop, which comes with Windows 7 x64 preinstalled. I'm having quite a hard time installing ubuntu on it. First of all, here is how I partitioned the drive using GPartEd: |==Dell utility partition==|==Dell Recovery partition==|==Windows 7==|[==Ubuntu==|==Data partition==]| Where [] denotes an extended partition. Here are the steps I completed: I used GParted to create this structure, keeping windows 7 installed I booted ubuntu LiveCD, and installed it on the right partition I let it install grub automatically I rebooted intu ubuntu I went back to windows 7, no problems I then rebooted. Grub was gone. I used Super Grub Disk to restore grub, it didn't work. I tried to boot into ubuntu from supergrubdisk, but grub couldn't fint the boot folder I then reinstalled ubuntu, went through the same steps, but there SGD did boot my ubuntu I reverted to the previous version of grub, and installed it on my hard drive It worked, but trying to boot win7 got me the "No MBR, press Ctrl+Alt+Del to reboot" error I used the windows 7 cd to restore the MBR (the auto wizard didn't work, had to rebuild the mbr from command line Now Ubuntu is gone. 7 works fine I read a lot about this, and realized that many people could simply not boot win7 again after encountering this problem. Now I'd like to restore GRUB, but I really won't go through the hassle of doing a full new cycle of installing/reinstalling everything again. Is there a GRUB guru around, to provide me with a detailed guide to not screwing everything up once again? Thanks a lot!

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >