pig head - Page 213 - Developer IT

Defining Light Coordinates

- by Zachary

I took a Computer Graphics exam a couple of days ago which had extra credit question like the following: A light can be defined in one of two ways. It can be defined in world coordinates, e.g. a street light, or in the viewer (eye coordinates), e.g., a head-lamp worn by a miner. In either case the viewpoint can freely change. Describe how the light should be transformed different in these two cases. Since I won't get to see the results of this until after spring break, I thought I would ask here. It seems like the analogies being used are misleading - could you not define a light source that is located at the viewers eye in world coordinates just as well as you could in eye coordinates? I've been doing some research on how OpenGL handles light, and it seems as though it always uses eye coordinates - the ModelView matrix would be applied to any light in world coordinates. In that case the answer may just be that you would have to transform light defined in world coordinates into eye coordinates using something like the ModelView matrix, while light defined in eye coordinates would only need to be transformed by the projection matrix. Then again I could be totally under thinking (or over thinking this). Another thought I had is that it determines which way you render shadows, but that has more to do with the location of the light and its type (point, directional, emission, etc) than what coordinates it is represented in. Any ideas?

Read the article

embedded php in html to include header (top part of page) into the page

- by Andy

Hi there, I'm trying to put the top of my page (which is all html) in a seperate file so I only need to change things once like the menu bar etc. So I googled some and found a solution on this website as well, but it doesn't work and I don't know why. So I have a page like article.html and on the top I have this: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html lang="en"> <head> <?php include("/pages/header.php"); ?>  In the header.php I have the html that should be on the top of each page and it starts with: <?php /** * @author name * website header */ ?>  So what's wrong with this. When I open the page article.html and right click on it to view the source, I can see the php from above calling the header.php file. Thanks!

Read the article

WPF Textbox & Borders - curious resizing behavior

- by CitizenParker

The following XAML produces a window with strange behavior around the textbox: <Window x:Class="WpfSandbox.CuriousExample" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="CuriousExample" Height="300" Width="300"> <DockPanel Margin="15"> <TextBox BorderThickness="1" BorderBrush="#FF000000"></TextBox> </DockPanel> </Window> What happens, at least during my limited testing, is that the textbox renders with an inset border pattern (top/left is black, right/bottom is grey). However, when you resize to any position except the original, the entire textbox border goes to black. Whenever you return the window to the exact number of on-screen pixels the form had when it first loaded, it's inset again. I'm guessing it isn't pixel snapping as I can easily correct the problem with this code: <Window x:Class="WpfSandbox.CuriousExample" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="CuriousExample" Height="300" Width="300"> <DockPanel Margin="15"> <Border BorderThickness="1" BorderBrush="#FF000000"> <TextBox BorderThickness="0" ></TextBox> </Border> </DockPanel> </Window> Anyone care to venture an explanation as to what I'm seeing? Or is it all in my head? Like I said, the above workaround can resolve this problem - just trying to understand what is happening here. Thanks, -Scott

Read the article

F#: Tell me what I'm missing about using Async.Parallel

- by JBristow

ok, so I'm doing ProjectEuler Problem #14, and I'm fiddling around with optimizations in order to feel f# out. in the following code: let evenrule n = n / 2L let oddrule n = 3L * n + 1L let applyRule n = if n % 2L = 0L then evenrule n else oddrule n let runRules n = let rec loop a final = if a = 1L then final else loop (applyRule a) (final + 1L) n, loop (int64 n) 1L let testlist = seq {for i in 3 .. 2 .. 1000000 do yield i } let getAns sq = sq |> Seq.head let seqfil (a,acc) (b,curr) = if acc = curr then (a,acc) else if acc < curr then (b,curr) else (a,acc) let pmap f l = seq { for a in l do yield async {return f a} } |> Seq.map Async.RunSynchronously let pmap2 f l = seq { for a in l do yield async {return f a} } |> Async.Parallel |> Async.RunSynchronously let procseq f l = l |> f runRules |> Seq.reduce seqfil |> fst let timer = System.Diagnostics.Stopwatch() timer.Start() let ans1 = testlist |> procseq Seq.map // 837799 00:00:08.6251990 printfn "%A\t%A" ans1 timer.Elapsed timer.Reset() timer.Start() let ans2 = testlist |> procseq pmap printfn "%A\t%A" ans2 timer.Elapsed // 837799 00:00:12.3010250 timer.Reset() timer.Start() let ans3 = testlist |> procseq pmap2 printfn "%A\t%A" ans3 timer.Elapsed // 837799 00:00:58.2413990 timer.Reset() Why does the Async.Parallel code run REALLY slow in comparison to the straight up map? I know I shouldn't see that much of an effect, since I'm only on a dual core mac. Please note that I do NOT want help solving problem #14, I just want to know what's up with my parallel code.

Read the article

I cannot grok MVC, what it is, and what it is not?

- by Hao

I cannot grok what MVC is, what mindset or programming model should I acquire so MVC stuff can instantly "lightbulb" on my head? If not instantly, what simple programs/projects should I try to do first so I can apply the neat things MVC brings to programming. OOP is intuitive and easier, object is all around us, and the benefits of code reuse using OOP-paradigm instantly click to anyone. You can probably talk to anybody about OOP in a few minutes and lecture some examples and they would get it. While OOP somehow raise the intuitiveness aspect of programming, MVC seems to do the opposite. I'm getting negative thoughts that some future employers(or even clients) would look down upon me for not using MVC technology. Though I probably get the skinnable aspect of MVC, but when I try to apply it to my own project, I don't know where to start. And also some programmers even have diverging views on how to accomplish MVC properly. Take this for instance from Jeff's post about MVC: The view is simply how you lay the data out, how it is displayed. If you want a subset of some data, for example, my opinion is that is a responsibility of the model. So maybe some programmers use MVC, but they somehow inadvertently use the View or the Controller to extract a subset of data. Why we can't have a definitive definition of what and how to accomplish MVC properly? And also, when I search for MVC .NET programs, most of it applies to web programs, not desktop apps, this intrigue me further. My guess is, this is most advantageous to web apps, there's not much problem about intermixed view(html) and controller(program code) in desktop apps.

Read the article

Passing an NSDate

- by Garry

I'm new to the iPhone and objective-c and I am still trying to get my head around ownership of objects so bear with me. I have a DOBViewController that has a datepicker on it. I have created a custom init method: -(id)initWithInitialDate(NSDate *)initialDate; Another view controller has a date instance declared (NSDate *dob) that holds a value. I would like to pass this to the DOBViewController so that it can scroll the datepicker to the passed value. Here is the custom init method: - (id)initWithInitialDate:(NSDate *)initialDate { // Initialise ourselves self = [super init]; // Set the date of the date picker if (initialDate != nil) { datePicker.date = initialDate; } else { // Set it to today datePicker.date = [NSDate date]; } return self; } This is how I am sending the dob NSDate object: DOBViewController *dobViewController = [[DOBViewController alloc] initWithInitialDate:dob]; Where dob is a variable of type NSDate that is declared in the header file. This doesn't seem to work as initialDate is always NULL. What am I doing wrong?

Read the article

FileNotFoundException, although the XML file should be deployed

- by Bernhard V

Hi, I've got problems starting my WAR application on a local JBoss. After two other EARs are deployed and the TomcatDeployer begins deploying the WAR, I'm getting the following error message: 2010-04-28 10:01:56,605 ERROR [org.jboss.ejb.plugins.LogInterceptor] [] [main] EJBException in method: public abstract at.sozvers.stp.zpv.ejb.lea.rwsuc.EJBLeaRegelwerkSuchenRemote at.sozvers.stp.zpv.ejb.lea.rwsuc.EJBLeaRegelwerkSuchenHome.create() throws javax.ejb.CreateException,java.rmi.RemoteException, causedBy: javax.ejb.EJBException: org.springframework.beans.factory.access.BootstrapException: Unable to initialize group definition. Group resource name [classpath*:applicationContext.xml], factory key [contextService]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'contextService' defined in URL [jar:file:/C:/ta30/nutzb/jboss-4.2.3.GA.ZPV/server/default/deploy/deploy.last/zpv-app-web-frontend-1.0-SNAPSHOT.war/WEB-INF/lib/zpv-comp-ejb-modules-1.0-SNAPSHOT-client.jar!/applicationContext.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [org.springframework.context.support.ClassPathXmlApplicationContext]: Constructor threw exception; nested exception is org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [at/sozvers/stp/zpv/dao/ContextBasic.xml]; nested exception is java.io.FileNotFoundException: class path resource [at/sozvers/stp/zpv/dao/ContextBasic.xml] cannot be opened because it does not exist The sad thing is that the resource at/sozvers/stp/zpv/dao/ContextBasic.xml actually is placed in a JAR in one of my EAR files which should be deployed before the WAR. And at least I get a message that the deployment of the EAR has been successful. I also looked into the JAR with my file archiver and the ContextBasic.xml is indeed there at the right place. Is there a way for me to get sure that the JAR, not the EAR as a whole, is really deployed to the JBoss? I'm already starting to lose my head about this issue. Thank you. Bernhard

Read the article

Embedded Vimeo Video Callbacks

- by Andrew

This post is kind of a follow up to a post I made earlier in regards to HTML5 video callbacks. In that thread, I was given a great piece of code that would allow for the browser to be informed of when the video stops playing and then fire off an action (with jQuery). This is the code I'm currently using: $('video.normal').bind('ended', function(){ $(this).fadeOut().queue(function(){ $(this).siblings('.post-video').fadeIn(); $(this).dequeue(); }); }); Which basically fades the video out when it's completed and brings a poster frame of the video (or similar image) back into view. Well, the scope of the project has changed and now the client is asking for true full screen video and different size videos to be delivered based on user connection speed, something that's a little over my head and a lot over budget. So I've been researching and a Vimeo Plus player seems like a great alternative for visitors using a desktop browser (HD embeds, true full screen, and more). Thing is, I need that above code to continue working in some capacity or another, so does the embedded Vimeo player offer a similar callback that I can utilize? Or am I SOL here? Thanks in advance!

Read the article

Raphael JS image animation performance.

- by michael

Hi, I'm trying to create an image animation using Raphael JS. I want the effect of a bee moving randomly across the page, I've got a working example but it's a bit "jittery", and I'm getting this warning in the console: "Resource interpreted as image but transferred with MIME type text/html" I'm not sure if the warning is causing the "jittery" movement or its just the way I approached it using maths. If anyone has a better way to create the effect, or improvements please let me know. I have a demo online here and heres my javascript code: function random(min, max) { return Math.floor(Math.random() * (max - min + 1)) + min; } function BEE(x, y, scale) { this.x = x; this.y = y; this.s = scale; this.paper = Raphael("head", 915, 250); this.draw = function() { this.paper.clear(); this.paper.image("bee.png", this.x, this.y, 159*this.s, 217*this.s); } this.update = function() { var deg = random(-25, 25); var newX = Math.cos(Raphael.rad(deg)) * 2; var newY = Math.sin(Raphael.rad(deg)) * 2; this.x += newX; this.y += newY; if( this.x > 915) { this.x = 0; } if( this.y > 250 || this.y < 0 ) { this.y = 125; } } } $(document).ready(function() { var bee = new BEE(100, 150, 0.4); var timer = setInterval(function(){ bee.draw(); bee.update(); }, 15); }

Read the article

SecurityNegotiationException in WCF Service Hosted on IIS

- by Ram

Hi, I have hosted a WCF service on IIS. The configuration file is as follows <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.web.extensions> <scripting> <webServices>    </webServices>  </scripting> </system.web.extensions>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <system.serviceModel> <services> <service name="IISTest2.Service1" behaviorConfiguration="IISTest2.Service1Behavior">  <endpoint address="" binding="wsHttpBinding" contract="IISTest2.IService1">  <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="IISTest2.Service1Behavior">  <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> The client configuration file is as follows <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IService1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://yyy.zzz.xxx.net/IISTest2/Service1.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IService1" contract="ServTest.IService1" name="WSHttpBinding_IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> When I tried to access the service from client application, I got SecurityNegotiationException and details are Secure channel cannot be opened because security negotiation with the remote endpoint has failed. This may be due to absent or incorrectly specified EndpointIdentity in the EndpointAddress used to create the channel. Please verify the EndpointIdentity specified or implied by the EndpointAddress correctly identifies the remote endpoint. If I host the service on ASP .NET Dev server, it work well but if I host on IIS above mentioned error occurs. Thanks, Ram

Read the article

How to Upload a file from client to server using OFBIZ?

- by SIVAKUMAR.J

Hi all, Im new to ofbiz.So is my question is have any mistake forgive me for my mistakes.Im new to ofbiz so i did not know some terminologies in ofbiz.Sometimes my question is not clear because of lack of knowledge in ofbiz.So try to understand my question and give me a good solution with respect to my level.Because some solutions are in very high level cannot able to understand for me.So please give the solution with good examples. My problem is i created a project inside the ofbiz/hot-deploy folder namely "productionmgntSystem".Inside the folder "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem" i created a .ftl file namely "app_details_1.ftl" .The following are the coding of this file <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Insert title here</title> <script TYPE="TEXT/JAVASCRIPT" language=""JAVASCRIPT"> function uploadFile() { //alert("Before calling upload.jsp"); window.location='<@ofbizUrl>testing_service1</@ofbizUrl>' } </script> </head>  <form action="<@ofbizUrl>logout1</@ofbizUrl>" enctype="multipart/form-data" name="app_details_frm"> <center style="height: 299px; "> <table border="0" style="height: 177px; width: 788px"> <tr style="height: 115px; "> <td style="width: 103px; "> <td style="width: 413px; "><h1>APPLICATION DETAILS</h1> <td style="width: 55px; "> </tr> <tr> <td style="width: 125px; ">Application name : </td> <td> <input name="app_name_txt" id="txt_1" value=" " /> </td> </tr> <tr> <td style="width: 125px; ">Excell sheet         : </td> <td> <input type="file" name="filename"/> </td> </tr> <tr> <td>  <input type="submit" name="logout_cmd" value="logout"/> </td> <td>  <input type="button" name="upload1_cmd" value="Upload" onclick="uploadFile()"/> </td> </tr> </table> </center> </form> </html> the following coding is present in the file "ofbiz\hot-deploy\productionmgntSystem\webapp\productionmgntSystem\WEB-INF\controller.xml" ...... ....... ........ <request-map uri="testing_service1"> <security https="true" auth="true"/> <event type="java" path="org.ofbiz.productionmgntSystem.web_app_req.WebServices1" invoke="testingService"/> <response name="ok" type="view" value="ok_view"/> <response name="exception" type="view" value="exception_view"/> </request-map> .......... ............ .......... <view-map name="ok_view" type="ftl" page="ok_view.ftl"/> <view-map name="exception_view" type="ftl" page="exception_view.ftl"/> ................ ............. ............. The following are the coding present in the file "ofbiz\hot-deploy\productionmgntSystem\src\org\ofbiz\productionmgntSystem\web_app_req\WebServices1.java" package org.ofbiz.productionmgntSystem.web_app_req; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.DataInputStream; import java.io.FileOutputStream; import java.io.IOException; public class WebServices1 { public static String testingService(HttpServletRequest request, HttpServletResponse response) { //int i=0; String result="ok"; System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- Start"); String contentType=request.getContentType(); System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- contentType : "+contentType); String str=new String(); // response.setContentType("text/html"); //PrintWriter writer; if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0)) { System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) after if (contentType != null)"); try { // writer=response.getWriter(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try Start"); DataInputStream in = new DataInputStream(request.getInputStream()); int formDataLength = request.getContentLength(); byte dataBytes[] = new byte[formDataLength]; int byteRead = 0; int totalBytesRead = 0; //this loop converting the uploaded file into byte code while (totalBytesRead < formDataLength) { byteRead = in.read(dataBytes, totalBytesRead,formDataLength); totalBytesRead += byteRead; } String file = new String(dataBytes); //for saving the file name String saveFile = file.substring(file.indexOf("filename=\"") + 10); saveFile = saveFile.substring(0, saveFile.indexOf("\n")); saveFile = saveFile.substring(saveFile.lastIndexOf("\\")+ 1,saveFile.indexOf("\"")); int lastIndex = contentType.lastIndexOf("="); String boundary = contentType.substring(lastIndex + 1,contentType.length()); int pos; //extracting the index of file pos = file.indexOf("filename=\""); pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; pos = file.indexOf("\n", pos) + 1; int boundaryLocation = file.indexOf(boundary, pos) - 4; int startPos = ((file.substring(0, pos)).getBytes()).length; int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length; //creating a new file with the same name and writing the content in new file FileOutputStream fileOut = new FileOutputStream("/"+saveFile); fileOut.write(dataBytes, startPos, (endPos - startPos)); fileOut.flush(); fileOut.close(); System.out.println("\n\n\t**********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - try End"); } catch(IOException ioe) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch IOException"); //ioe.printStackTrace(); return("exception"); } catch(Exception ex) { System.out.println("\n\n\t*********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) - Catch Exception"); return("exception"); } } else { System.out.println("\n\n\t********************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response) else part"); result="exception"; } System.out.println("\n\n\t*************************************\n\tInside WebServices1.testingService(HttpServletRequest request, HttpServletResponse response)- End"); return(result); } } I want to upload a file to the server.The file is get from user "<input type="file"..> tag in the "app_details_1.ftl" file & it is updated into the server by using the method "testingService(HttpServletRequest request, HttpServletResponse response)" in the class "WebServices1".But the file is not uploaded. Give me a good solution for uploading a file to the server. Thanks & Regards, Sivakumar.J

Read the article

svn import, dont modify revision OR modify the list of files in a transaction

- by Vaughan Durno

Hi Ive gained so much knowledge/insight from this site in the past few years, now im actually hoping to get some enlightenment. The scenario is as follows: You have the general structure of the repo (trunk,branches,tags) but added to the layout you have another directory called 'db_revs'. Now in the pre-commit, you take a dump of a specific database (the specifics are irrelevant) into a temporary file, say /tmp/REV.sql (REV being the HEAD revision number of the repo, or the transaction). K all is well and you can just import that temp file into the repo at /db_revs/REV.sql Now obviously that import, even tho its happening during a commit, increments the revision of the repo. So when u do a commit at some point to say 'test.php' in the trunk and it completes at say revision 159, then the pre-commit runs as it should and the DB dump gets imported but then u r sitting with a tree in the repo-browser where 'trunk' is at revision 159, and 'db_revs', which has the imported dump, is at 158 (Ive made it so that the filename matches the revision ie: 159.sql but that file is then at revision 158). NB If you're doing an import in a pre-commit, you need to add some logic to not perform the import, say by checking first for the existence of the temp file, otherwise it will cause, um, a stack overflow and your PC will quickly crawl to a stand still So I wanted to know if it was possible to make an import to not commit its changes. I realise I might be barking up the wrong tree to begin with so I have another idea of doing this so that brings me to the 2nd part of my question, would it be possible to modify the list of files that the transaction is about to commit to the repo. I know this can be done to a WC but that wont help as a WC is a checked out copy of say the trunk so im not sure how u would add a file to the 'db_revs' folder which is above trunk? Any help is greatly appreciated Cheers Vaughan

Read the article

SQL Server Clustered Index: (Physical) Data Page Order

- by scherand

I am struggling understanding what a clustered index in SQL Server 2005 is. I read the MSDN article Clustered Index Structures (among other things) but I am still unsure if I understand it correctly. The (main) question is: what happens if I insert a row (with a "low" key) into a table with a clustered index? The above mentioned MSDN article states: The pages in the data chain and the rows in them are ordered on the value of the clustered index key. And Using Clustered Indexes for example states: For example, if a record is added to the table that is close to the beginning of the sequentially ordered list, any records in the table after that record will need to shift to allow the record to be inserted. Does this mean that if I insert a row with a very "low" key into a table that already contains a gazillion rows literally all rows are physically shifted on disk? I cannot believe that. This would take ages, no? Or is it rather (as I suspect) that there are two scenarios depending on how "full" the first data page is. A) If the page has enough free space to accommodate the record it is placed into the existing data page and data might be (physically) reordered within that page. B) If the page does not have enough free space for the record a new data page would be created (anywhere on the disk!) and "linked" to the front of the leaf level of the B-Tree? This would then mean the "physical order" of the data is restricted to the "page level" (i.e. within a data page) but not to the pages residing on consecutive blocks on the physical hard drive. The data pages are then just linked together in the correct order. Or formulated in an alternative way: if SQL Server needs to read the first N rows of a table that has a clustered index it can read data pages sequentially (following the links) but these pages are not (necessarily) block wise in sequence on disk (so the disk head has to move "randomly"). How close am I? :)

Read the article

Internet Explorer Warning when embedding Youtube on HTTPS site?

- by pellepim

Our application is run over HTTPS which rarely presents any problems for us. When it comes to youtube however, the fact that they do not present any content over SSL connections is giving us some head ache when trying to embed clips. Mostly because of Internet Explorers famous little warning message: "Do you want to view only the webpage content that was delivered securely? This page contains content that will not be delivered using a secure HTTPS ... etc" I've tried to solve this in several ways. The most promising one was to use the ProxyPass functionality in Apache to map to YouTube. Like this: ProxyPass: /youtube/ http://www.youtube.com ProxyPassReverse: /youtube/ http://www.youtube.com This gets rid of the annoying warning. However, the youtube SWF fails to start streaming The SWF i manage to load into the browser simply states : "An error occurred, please try again later". Potential solutions are perhaps: Download youtube FLV:s and serve them out of own domain (gah) Use custom FLV-player and stream only FLV:s from youtube over a https proxy? Update 10 March: I've tried to use Googles Youtube API for ActionScript to load a player. It looked promising at first and I was able to load a player through my https:// proxy. However, the SWF that is loaded contains loads of explicit calls to different non-ssl urls to create authentication links for the FLV-stream and for loading different crossdomain policies. It really seems like we're not supposed to access flv-streams directly. This makes it very hard to bypass the Internet Explorer warning, short of ripping out the FLV:s from youtube and serving them out of your own domain. There are solutions out there for downloading youtubes FLV:s. But that is not compliant with the Youtube terms of use and is really not an option for us.

Read the article

Why can't I create a database in an empty ASP MVC 2 project using Project->Add->New Item->SQL Server

- by Dr Dork

I'm diving head first into ASP MVC and am playing around with creating and manipulating a database. I did a search and found this tutorial for creating a database, however when I follow it, I get this error when trying to add a new database to my fresh, empty ASP MVC 2 project... A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) The only requirement the tutorial mentioned was SQL Server Express, but when I went to download it, it said it was already installed. I'm assuming it was part of the VS 2010 RC I installed and am running. So I don't know what else I need if I am missing something. This is all new to me, so I'm sure I'm missing something obvious here and after I'm done posting this question, I plan to do some more research into the topic of databases and how they work with ASP MVC. In the meantime, I was you could help me answer a couple high level questions... What am I missing/forgetting to do that is causing this error? Any suggestions for good resources/tutorials that focus on using databases with ASP MVC? I've done a lot of database programming in the past, so I'm familiar with the concepts of relational databases and the SQL language. I wish I could find a good resource for learning how to work with them in an ASP dev environment, as well as a good breakdown of all the related technologies used for working with them (i.e. LINQ to SQL). Thanks so much in advance for all your help! I'm going to start researching these questions right now.

Read the article

problem drawing gRaphaeljs pie chart

- by Aswad

Hi, I was trying to draw the raphaeljs piechart. I used the same example as shown on "http://g.raphaeljs.com/piechart2.html". It renders me the text but the pie charts goes missing.Can someone please help? please find the code below. g·Raphaël Dynamic Pie Chart Demo window.onload = function () { var r = Raphael("holder"); r.g.txtattr.font = "12px 'Fontin Sans', Fontin-Sans, sans-serif"; r.g.text(320, 100, "Interactive Pie Chart Demo").attr({"font-size": 20}); var pie = r.g.piechart(320, 240, 100, [55, 20, 13, 32, 5, 1, 2, 10], {legend: ["%%.%% – Enterprise Users", "IE Users"], legendpos: "west", href: ["http://raphaeljs.com", "http://g.raphaeljs.com"]}); pie.hover(function () { this.sector.stop(); this.sector.scale(1.1, 1.1, this.cx, this.cy); if (this.label) { this.label[0].stop(); this.label[0].scale(1.5); this.label[1].attr({"font-weight": 800}); } }, function () { this.sector.animate({scale: [1, 1, this.cx, this.cy]}, 500, "bounce"); if (this.label) { this.label[0].animate({scale: 1}, 500, "bounce"); this.label[1].attr({"font-weight": 400}); } }); }; </script> </head> <body class="raphael" id="g.raphael.dmitry.baranovskiy.com"> <div id="holder"></div> <p> Pie chart with legend, hyperlinks on two first sectors and hover effect. </p> <p> Demo of <a href="http://g.raphaeljs.com/">g·Raphaël</a> JavaScript library. </p> </body>

Read the article

[mercurial] Prevent "hg status" from showing everything under untracked directories

- by Wei Hu

I find the output of hg status too verbose for untracked directories. Suppose I have an empty repository that's managed by both git and hg. So there would be two directories, .git and .hg. The output of git status is: # Untracked files: # (use "git add <file>..." to include in what will be committed) # # .hg/ The output of hg status is: ? .git/HEAD ? .git/config ? .git/description ? .git/hooks/applypatch-msg.sample ? .git/hooks/commit-msg.sample ? .git/hooks/post-commit.sample ? .git/hooks/post-receive.sample ? .git/hooks/post-update.sample ? .git/hooks/pre-applypatch.sample ? .git/hooks/pre-commit.sample ? .git/hooks/pre-rebase.sample ? .git/hooks/prepare-commit-msg.sample ? .git/hooks/update.sample ? .git/info/exclude Is there a way to reduce its output to something like the following line? ? .git/

Read the article

Subscription website architecture questions + SQL Server & .NET

- by chopps

Hey Guys, I have a few questions about the architecture of a subscription service I am about to embark on and I am looking for some feedback on how best to set it up. I won’t have a large amount of customers as Basecamp, maybe a few hundred and was wondering what would be a solid architecture for setting up the customer sites. I’m running SQL Server and .NET on a dedicated machine. Should create a new database for each customer as to have control and isolation of data or keep them all in one database? I am also thinking of creating a sub-domain for each customer as well so modifications can be made to each site as needed. The customer URLs would look like this: https://customer1.foobar.com https://customer2.foobar.com I am going to have the ability to ‘plug-in’ reports that will be uploaded to the site so each customer can customize as needed. Off the top of my head this necessitates having each sub domain on its own code-base for the uploading of these reports. So on the main site the customer would sign up for their new subscription and I would programmatically create a new directory for the customer from the main code base and then create a sub domain pointing to the new directory for the customer and then finally their database. Does this sound about right? Am I on the right track? How do other such sites accomplish the same thing? Thanks for letting me bend your ear for a bit on this.

Read the article

In git, how can I get the diff between two dates?

- by Weidenrinde

Basically, I am looking for something equivalent to cvs diff -D"1 day ago" -D"2010-02-29 11:11". While collecting more and more information, I found a solution. I paste it here, for others that might have similar problems. Things I have tried: In git, how can I get the diff between all the commits that occured between two dates? was ansered here with: git whatchanged --since="1 day ago" -p But this gives a diff for each commit, even if there are multiple commits in one file. I know that "date" is a bit of a loose concept in git, I thought there must be some way to do this. git diff 'master@{1 day ago}..master gives some warning warning: Log for 'master' only goes back to Tue, 16 Mar 2010 14:17:32 +0100. and does not show old diffs. git format-patch --since=yesterday --stdout does not give anything. revs=$(git log --pretty="format:%H" --since="1 day ago");git diff $(echo "$revs"|tail -n1) $(echo "$revs"|head -n1) works somehow, but seems complicated and does not restrict to the current branch. git diff $(git rev-list -n1 --before="1 day ago" master) seems to work and a default way to do similar things, although more complicated than I thought. Funnily, git-cvsserver does not support "cvs diff -D" (without that it is documented somewhere).

Read the article

Perl to Ruby conversion (multidimensional arrays)

- by Alex

I'm just trying to get my head around a multidimensional array creation from a perl script i'm currently converting to Ruby, I have 0 experience in Perl, as in i opened my first Perl script this morning. Here is the original loop: my $tl = {}; for my $zoom ($zoommin..$zoommax) { my $txmin = lon2tilex($lonmin, $zoom); my $txmax = lon2tilex($lonmax, $zoom); # Note that y=0 is near lat=+85.0511 and y=max is near # lat=-85.0511, so lat2tiley is monotonically decreasing. my $tymin = lat2tiley($latmax, $zoom); my $tymax = lat2tiley($latmin, $zoom); my $ntx = $txmax - $txmin + 1; my $nty = $tymax - $tymin + 1; printf "Schedule %d (%d x %d) tiles for zoom level %d for download ...\n", $ntx*$nty, $ntx, $nty, $zoom unless $opt{quiet}; $tl->{$zoom} = []; for my $tx ($txmin..$txmax) { for my $ty ($tymin..$tymax) { push @{$tl->{$zoom}}, { xyz => [ $tx, $ty, $zoom ] }; } } } and what i have so far in Ruby: tl = [] for zoom in zoommin..zoommax txmin = cm.tiles.xtile(lonmin,zoom) txmax = cm.tiles.xtile(lonmax,zoom) tymin = cm.tiles.ytile(latmax,zoom) tymax = cm.tiles.ytile(latmin,zoom) ntx = txmax - txmin + 1 nty = tymax - tymin + 1 tl[zoom] = [] for tx in txmin..txmax for ty in tymin..tymax tl[zoom] << xyz = [tx,ty,zoom] puts tl end end end The part i'm unsure of is nested right at the root of the loops, push @{$tl->{$zoom}},{ xyz => [ $tx, $ty, $zoom ] }; I'm sure this will be very simple for a seasoned Perl programmer, thanks! `

Read the article

Manually Writing the HTML in TWebBrowser Pt. 2

- by nomad311

As the name suggests this is a continuation (sort of) of http://stackoverflow.com/questions/2784679/manually-writing-the-html-in-twebbrowser This time around I'm trying to add some auto-refresh logic to the HTML I get. I have pieced together an approach from several sources (see below). In short, I am trying to locate the title node and add a meta node after it (in the HTML head node). But, I get an access violation. Here is the source: iHtmlDoc := IHTMLDocument3(WebBrowser1.Document); iHtmlEleTitle := IHTMLElement2(iHtmlDoc.getElementsByName('title').item(0, 0)); iHtmlEle := IHTMLElement2(IHTMLDocument2(iHtmlDoc).createElement(Format('<meta http-equiv="refresh" content="%d">', [1]))); iHtmlEleTitle.insertAdjacentElement('afterEnd', IHTMLElement(iHtmlEle)); And A (technically not functionally) different way of doing it ...casting is slightly different here: IHTMLElement2(IHtmlDocument3(WebBrowser1.Document).getElementsByName('title').item(0, 0)).insertAdjacentElement('afterEnd', IHTMLDocument2(WebBrowser1.Document).createElement(Format('<meta http-equiv="refresh" content="%d">', [VPI_ISSUANCE_AUTO_RELOAD]))); Again all I get from Delphi is a access exception, and I fished through MSDN documentation on it, but now I'm hoping someone out there has gone through the same and has some insight. Any help? Sources (I think this is all of them): http://webdesign.about.com/od/metataglibraries/a/aa080300a.htm (auto-reload) http://delphi.about.com/od/adptips2005/qt/webbrowserhtml.htm (web browser document as an HTML document) http://msdn.microsoft.com/en-us/library/system.windows.forms.htmlelement.insertadjacentelement(VS.80).aspx (GetElementsByName) http://www.experts-exchange.com/Web_Development/Components/ActiveX/Q_26131034.html (insertAdjacentElement) http://www.experts-exchange.com/Programming/Languages/Pascal/Delphi/Q_23407977.html (GetElementsByName)

Read the article

SQL Joining Two or More from Table B with Common Data in Table A

- by Matthew Frederick

The real-world situation is a series of events that each have two or more participants (like sports teams, though there can be more than two in an event), only one of which is the host of the event. There is an Event db table for each unique event and a Participant db table with unique participants. They are joined together using a Matchup table. They look like this: Event EventID (PK) (other event data like the date, etc.) Participant ParticipantID (PK) Name Matchup EventID (FK to Event table) ParicipantID (FK to Participant) Host (1 or 0, only 1 host = 1 per EventID) What I'd like to get as a result is something like this: EventID ParticipantID where host = 1 Participant.Name where host = 1 ParticipantID where host = 0 Participant.Name where host = 0 ParticipantID where host = 0 Participant.Name where host = 0 ... Where one event has 2 participants and another has 3 participants, for example, the third participant column data would be null or otherwise noticeable, something like (PID = ParticipantID): EventID PID-1(host) Name-1 (host) PID-2 Name-2 PID-3 Name-3 ------- ----------- ------------- ----- ------ ----- ------ 1 7 Lions 8 Tigers 12 Bears 2 11 Dogs 9 Cats NULL NULL I suspect the answer is reasonably straightforward but for some reason I'm not wrapping my head around it. Alternately it's very difficult. :) I'm using MYSQL 5 if that affects the available SQL.

Read the article

[Asp.Net MVC] Encoding a character

- by Trimack

Hi, I am experiencing some weird encoding behaviour in my ASP.NET MVC project. In my Site.Master there is <div class="logo"> <a href="<%=Url.Action("Index", "Win7")%>"><%= Html.Encode("Windows 7 Tutoriál") %></a></div> which translates to the resulting page as <div class="logo"> <a href="/">Windows 7 TutoriA?l</a></div> However, in the Index.aspx there is <h1> Windows 7 Tutoriál</h1> which translates correctly on the same resulting page. I do have <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> as my first line in <head>. Locally, both files are saved in UTF-8 encoding. Any ideas why is this happening and how to fix it? Thanks in advance.

Read the article

Advice on coding Perl to work like PHP

- by user272273

I am first and foremost a perl coder, but like many, also code in PHP for client work, especially web apps. I am finding that I am duplicating a lot of my projects in the two languages, but using different paradigms (e.g. for handling cgi input and session data) or functions. What I would like to do is start to code my Perl in a way which is structured more like PHP, so that I a) am keeping one paradigm in my head b) can more quickly port over scripts from one to the other Specifically, I am asking if people could advise how you might do the following in perl? 1) Reproduce the functionality of $_SESSION, $_GET etc. e.g. by wrapping up the param() method of CGI.pm, a session library? 2) Templating library that is similar to PHP I am used to mixing my code and HTML in the PHP convention. e.g. i <h1>HTML Code here</h1> <? print "Hello World\b"; ?> Can anybody advise on which perl templating engine (and possibly configuration) will allow me to code similarly? 3) PHP function library Anybody know of a library for perl which reproduces a lot of the php inbuilt functions?

Read the article

Asp.net PopupControlExtender inside UpdatePabel

- by user296422

Hi, So i use PopupControlExtender (to edit some of the fields) inside ListViewControl which itself is embeded inside an UpdatePanel. The problem is as follows whenever you cause partail postback the popup panels are created client side outside the updatepanel. And you get more clientside controls with the same clientside ID. When you postback with popup panel the server side control eg. Texbox has Text = clientsidecontrol1.text, clientsidecontrol2.text, clientsidecontrol.text3 Is there a way to prevent this. <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Test.aspx.cs" Inherits="Secure_Test" %> <%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <cc1:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server"> </cc1:ToolkitScriptManager> <div> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <asp:Label ID="InputLabel" runat="server" Text="Whatever you put in the textbox"></asp:Label> <br /> <asp:Label runat="server"> <%= DateTime.Now.ToString() %></asp:Label> <br /> <asp:Button ID="Button1" runat="server" Text="Refresh" /> <br /> <asp:LinkButton ID="PopupLB" runat="server">Popup</asp:LinkButton> <br /> <cc1:PopupControlExtender ID="PopupControlExtender1" runat="server" PopupControlID="Panel1" TargetControlID="PopupLB" CommitProperty="Value"> </cc1:PopupControlExtender> <asp:Panel ID="Panel1" runat="server"> <asp:UpdatePanel ID="UpdatePanel2" runat="server"> <ContentTemplate> <asp:TextBox ID="InputTB" runat="server"></asp:TextBox> <asp:Button ID="SubmitBTN" runat="server" Text="Submit" onclick="SubmitBTN_Click" UseSubmitBehavior="false" /> </ContentTemplate> </asp:UpdatePanel> </asp:Panel> </ContentTemplate> </asp:UpdatePanel> </div> </form> </body> </html> using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using AjaxControlToolkit; public partial class Secure_Test : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void SubmitBTN_Click(object sender, EventArgs e) { PopupControlExtender pce = AjaxControlToolkit.PopupControlExtender.GetProxyForCurrentPopup(Page); pce.Commit("Popup"); InputLabel.Text = InputTB.Text; } } To make it easier to test i post the code of an example page i used for testing. To make myself clear here is an example: i click Popup. Type "asdf" in the textbox and click Submit. InputPanel dispalys "asdf" i click Popup again. Type "qwerty" in the textbox and click Submit. InputPanel now displays "qwerty,asdf" When you check it the firebug you get this: <form id="form1" action="Test.aspx" method="post" name="form1"> <div> <input type="hidden" value=";;AjaxControlToolkit, Version=3.0.30930.21526, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e:pl-PL:c83bc095-c5d9-40da-b175-dc46338fcc3a:865923e8:91bd373d:596d588c:411fea1c:e7c87f07:bbfda34c:30a78ec5:42b7c466;" id="ToolkitScriptManager1_HiddenField" name="ToolkitScriptManager1_HiddenField"> </div> <script type="text/javascript"> //<![CDATA[ var theForm = document.forms['form1']; if (!theForm) { theForm = document.form1; } function __doPostBack(eventTarget, eventArgument) { if (!theForm.onsubmit || (theForm.onsubmit() != false)) { theForm.__EVENTTARGET.value = eventTarget; theForm.__EVENTARGUMENT.value = eventArgument; theForm.submit(); } } //]]> </script> <script type="text/javascript" src="/WebResource.axd?d=B2RAZw_YugtketKJqWIbXA2&t=634051184591131846"></script> <script type="text/javascript" src="/ScriptResource.axd?d=zifZiisoqXYJSwLXuAZ4DmtrWVvn9x0W1r7qfDo40UU7q9QYoa5ChdBZD6dDL66f0flKVDmPL2woIPesut_FUpsFZUN2A5sDN7IOqPUOZO41&t=1a45d080"></script> <script type="text/javascript"> //<![CDATA[ if (typeof(Sys) === 'undefined') throw new Error('Ladowanie struktury strony klienta ASP.NET Ajax nie powiodlo sie.'); //]]> </script> <script type="text/javascript" src="/ScriptResource.axd?d=zifZiisoqXYJSwLXuAZ4DmtrWVvn9x0W1r7qfDo40UU7q9QYoa5ChdBZD6dDL66fyxEJaYB3uJEQ0r_TmOPczeBZ1gpFH5a6x4ug130lptsKAcGA3S1vt08sHQo5sFtH0&t=1a45d080"></script> <script type="text/javascript" src="/Secure/Test.aspx?_TSM_HiddenField_=ToolkitScriptManager1_HiddenField&_TSM_CombinedScripts_=%3b%3bAjaxControlToolkit%2c+Version%3d3.0.30930.21526%2c+Culture%3dneutral%2c+PublicKeyToken%3d28f01b0e84b6d53e%3apl-PL%3ac83bc095-c5d9-40da-b175-dc46338fcc3a%3a865923e8%3a91bd373d%3a596d588c%3a411fea1c%3ae7c87f07%3abbfda34c%3a30a78ec5%3a42b7c466"></script> <div> </div> <script type="text/javascript"> //<![CDATA[ Sys.WebForms.PageRequestManager._initialize('ToolkitScriptManager1', document.getElementById('form1')); Sys.WebForms.PageRequestManager.getInstance()._updateControls(['tUpdatePanel1','tUpdatePanel2'], [], [], 90); //]]> </script> <div> <div id="UpdatePanel1"> <span id="InputLabel">qwerty,asdf</span> <br> <span>2010-06-15 18:26:50</span> <br> <input type="submit" id="Button1" value="Refresh" name="Button1"> <br> <a href="javascript:__doPostBack('PopupLB','')" id="PopupLB">Popup</a> <br> </div> </div> <script type="text/javascript"> //<![CDATA[ (function() {var fn = function() {$get('ToolkitScriptManager1_HiddenField').value = '';Sys.Application.remove_init(fn);};Sys.Application.add_init(fn);})();Sys.Application.initialize(); Sys.Application.add_init(function() { $create(AjaxControlToolkit.PopupControlBehavior, {"CommitProperty":"Value","PopupControlID":"Panel1","dynamicServicePath":"/Secure/Test.aspx","id":"PopupControlExtender1"}, null, null, $get("PopupLB")); }); //]]> </script> <div id="Panel1" style="position: absolute; left: 8px; top: 73px; z-index: 1000; display: none; visibility: hidden;"> <div id="UpdatePanel2"> <input type="text" id="InputTB" name="InputTB"> <input type="button" id="SubmitBTN" onclick="javascript:__doPostBack('SubmitBTN','')" value="Submit" name="SubmitBTN"> </div> </div><span style="display: none ! important;"><input type="hidden" name="__EVENTTARGET" id="__EVENTTARGET" value=""></span><span style="display: none ! important;"><input type="hidden" name="__EVENTARGUMENT" id="__EVENTARGUMENT" value=""></span><span style="display: none ! important;"><input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUJMTkwNzc2NzAzD2QWAgIDD2QWAgIDD2QWAmYPZBYCAgEPDxYCHgRUZXh0BQtxd2VydHksYXNkZmRkZApLPc2nZUC+UkZsCrByuofHMah5"></span><span style="display: none ! important;"><input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWBQLi2qWdAwKM54rGBgKIkJujDQKbjp+pDQKc7v+tArliNtJzeG8HrfsGBBXIViJAUGMz"></span><div id="Panel1" style="visibility: hidden; position: absolute; left: 8px; top: 73px; z-index: 1000; display: none;"> <div id="UpdatePanel2"> <input type="text" id="InputTB" value="asdf" name="InputTB"> <input type="button" id="SubmitBTN" onclick="javascript:__doPostBack('SubmitBTN','')" value="Submit" name="SubmitBTN"> </div> </div><div id="Panel1" style="display: none; visibility: hidden; position: absolute;"> <div id="UpdatePanel2"> <input type="text" id="InputTB" value="qwerty,asdf" name="InputTB"> <input type="button" id="SubmitBTN" onclick="javascript:__doPostBack('SubmitBTN','')" value="Submit" name="SubmitBTN"> </div> </div></form> InputTB and Panel1 where generated 3 time.

Search Results

Search found 6545 results on 262 pages for 'pig head'.

Page 213/262 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >

- by Zachary

- by Andy

- by CitizenParker

- by JBristow

- by Hao

- by Garry

- by Bernhard V

- by Andrew

- by michael

- by Ram

- by SIVAKUMAR.J

- by Vaughan Durno

- by scherand

- by pellepim

- by Dr Dork

- by Aswad

- by Wei Hu

- by chopps

- by Weidenrinde

- by Alex

- by nomad311

- by Matthew Frederick

- by Trimack

- by user272273

- by user296422

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >