Search Results

Search found 9715 results on 389 pages for 'servers'.

Page 213/389 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Where to begin with IPv6 [closed]

  - by Willem de Vries

  I am fairly familiar with setting-up IPv4 networks for bigger server configurations, only now I wanted to start familiarizing myself with doing the same for IPv6. I have been Googling for the second night in a row for things like: IPv6 network design, IPv6 for dummies, etc. So far most things you find go on about why IPv6 and the amazing amount of numbers that we have now. Yet I am looking for practical stuff, for example: what would be a good way to assign IP-number, as I understand it DHCP shouldn't be the default course of action. How do other assignment methods work with DNS configuration? what would be a good or standard way of dividing the network in to sub-nets? (database, application, web servers spread over multiple domains/applications and some what intertwined) In short I would like to find good resources with practical information books, webpages, etc.

  Read the article

• For kvm host images. GFS2 or OCFS2 with drbd8?

  - by yvess

  I want a shared filesystem on top of drbd8 on two nodes. The servers run ubuntu 9.10. I googled a lot, but couldn't find an clear trend what the web community prefers. It's seems that OCFS2 is more used at the moment. Which filesystem is more reliable, faster? GFS2 or OCFS2? Is the linux community going more towards GFS2 or OCFS2? Which of this two is better supported by ubuntu 9.10? Are there better (or more common) alternatives?

  Read the article

• Defragment / Performance Monitor without Task Scheduler

  - by mjaggard

  My organisation has a policy of disabling Task Scheduler on all servers and workstations (don't ask, I tried once to wrestle the pig). I need to collect performance stats using Data Collector Sets in Windows 7 or Windows 2008 but the Performance Monitor interface requires Task Scheduler to be running. Is this possible because I'm not trying to schedule anything (except the collection of WMI information every 15 seconds but I doubt it hands that task off to the task scheduler)? Is there any way to trick it into thinking Task Scheduler is running? If not, is there any way to temporarily override the group policy to allow Task Scheduler to run? I've found that most group policy can be overridden in this way by an Administrator by editing the registry. On exactly the same vein, I want to defragment a hard disk on one of my workstations, but I can't get it to start because of the dependancy on Task Scheduler - is it possible to overcome this?

  Read the article

• Load balance incoming traffic

  - by justin

  Dear All Please I have the following scenario. 3 servers voip / mail / terminal one load balancing router 2 internet connections (static ip`s) My concern is to load balance incoming traffic since the outgoing traffic is being taking care by the load balancing router. For instance all offices connect to the mail server via the internet same for voip and terminal services. The mail and voip clients are set up with one of the static ip`s and the router forwards the request to the appropriate server. But obviously like this there is no fail over nor load balancing cause all requests are being directed to one internet connection. Anyone has a suggestion was thing of a dns server, does this make sens ? or maybe a hosted option ? Thanks Justin

  Read the article

• Performance difference between compiled and binary linux distributions/packages

  - by jozko

  I was searching a lot on the internet and couldn't find an exact answer. There are distros like Gentoo (or FreeBSD) which does not come with binaries but only with source code for packages (ports). The majority of distros uses binary backages (debian, etc.). First question: How much speed increase can I expect from compiled package? How much speed increase can I get from real world packages like apache or mysql? i.e. queries per second? Second question: Does binary package means it does not use any CPU instructions that was introduced after first AMD 64bit CPU? With the 32bit packages does it mean that the package will run on 386 and basically does not use most of the modern CPU instructions? Additional info: - I am not talking about desktop, but server environment. - I dont care about compile time - I have more servers, so speed increase more than 15% is worth for using source code packages - Please no flamewars. Thank you very much

  Read the article

• Hypervisor for mixed client and server OSes

  - by Mark

  I need to replace three old boxes I use for development, running Linux, Win Server and Win XP. Instead of purchasing three new boxes I am thinking of purchasing a single box and virtualizing the OSes. As it is for development, absolute performance is not a problem, but I want the Linux and Win servers to run continuously, while running Win 7 as if it is a regular PC. Therefore running Linux and Win Server on top off Win 7 is not an option. Is this a viable solution? Has anyone done this? What is performance like? I'd like to get decent graphics performance with Win 7, sufficient to run the occasional game. If so, I'm looking for suggestions or recommendations on which hypervisor or virtualization option to go for.

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• Group Policy Task Schedule deployed to User Configuration not working, works when in Computer Configuration?

  - by user80130

  I added a Scheduled Task on my Windows 2008 R2 Domain Controller in the Group Policy Manager: MyDomain Policy User Configuration Preferences Control Panel Settings Scheduled Tasks Basic Task, like starting notepad, when user unlocks his workstation. This should show up in the client workstation's task scheduler, but it dosn't. No errors or anything like that. If I use the "Computer Configuration" instead of "User Configuration" the task appears, and I'm able to run the task. I've tried the gpupdate /force followed by gpresult and checked the report, but it dosn't contain the GPO Scheduled Tasks I created? (again, does show up when using "Computer Configuration".) The issue is that I have to run the application in the current users context, and only on a specific Employee OU, and thereby limit this task only to Employee Workstations and not apply the application when the same employee log on to internal servers and such. Primary domain dontroller is a Windows 2008 R2, workstations Windows 7 Enterprise. What am I doing wrong ?

  Read the article

• MOM 2005 SP1 and MBSA 2.1 : Compatible?

  - by Mitch

  We're currently using MOM 2005 SP1 for our system monitoring duties. It was installed and "configured" by someone who is no longer on our team. In the process of correcting a persistent error in the applications log of all of the monitored servers, "Default Global Virtual Directory Not Configured", I'm seeing the MBSA management pack is for MBSA v1.2. The current version of the MBSA appears to be 2.1. Does anyone have any experience in configuring MOM to use MBSA 2.1? Does MOM get along with MBSA 2.1? Any input would be appreciated. Point me in the direction of more reading if there's something out there I should be referring to. Thanks!

  Read the article

• Website with large number of users keeps going down due to memory leaks:Tomcat6 and Java 6

  - by user1766478

  We host many websites on one of our two virtual servers. We use tomcat 6 and Java 6. It is an MVC model with a hibernate like layer. The problem is, one of our biggest clients with the most number of members, keeps crashing the server every 6-8 hours(precisely in the mornings when most members login) We have been having this issue for 4 days now. Trying to figure out the problem but we suspect memory leaks. Any suggestions?

  Read the article

• IIS 7 - Provisioning portal

  - by Doug

  I am wanting to setup our production IIS environments with a provisioning portal to ensure that deployment staff always setup sites in a uniform configuration, and that they don't actually have remote access to the servers directly. What is the best 'simple' provisioning tool for such a purpose? Do people write their own using something like Powershell remoting? I don't want to install a tool like HELM or similar as it feels like it creates unnecessary bloat on top of a production environment. features should include: create new website and app pool combo restart, start and stop application pools change bindings on websites

  Read the article

• How much should I charge for setting up a client web server? [closed]

  - by Vincent

  I have quite the eccentric client who wants to move all his ecommerce websites (about 5-10, all PHP/MySQL) to his own web server that I'm supposed to build. He doesn't want to hear anything about VPS hosting and all the issues and expenses related to owning a server. My responsibility would be to buy all the hardware, install and configure software, etc. How much should I charge for this? I'm planning to start with two relatively moderate Dell PowerEdge C2100 servers, one for web (NGINX), one for db (MySQL).

  Read the article

• Whatsup gold reporting

  - by rotard

  I work for an IT consulting company, and we use WhatsUp Gold to monitor our and our clients' servers. WUG works, and provides all the data we need in a reasonably useful format. However, management wants to use it as a sales tool. They want more attractive reports that they can hand off to clients and prospective clients to show off how slick our monitoring software is. Is there a third-party solution that will generate more attractive reports based on data in the WUG database? I have already suggested using reporting services to build our own reports, but that idea was rejected.

  Read the article

• Windows Scheduled Tasks losing password configuration

  - by E Brown

  I have a couple of jobs scheduled to run daily on a customer server running Windows Server 2003 Standard Edition, SP1 using Windows Scheduled Tasks. The tasks are set to run as a user that is in the Administrators group, and were scheduled as that same user. The password of that user is set to never expire. These tasks fail to run pretty much every day. Going into Scheduled Tasks and attempting to run the tasks manually indicates that the password is incorrect. I go into the task properties, retype the password into the appropriate fields, click OK, and attempt to run the task manually again. Now it works fine. What might be the cause of the password being lost like this? These same tasks are running on other customers servers with no problems. Thanks in advance for any thoughts.

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Possible to get IIS on Windows Server 2008 R2 to "port-forward" port 80 for certain domains to other

  - by Lasse V. Karlsen

  I have IIS set up on my server, but also Apache x2 (other products which comes with their own servers, cannot be integrated into IIS.) Is it possible for me to "port-forward" certain domains on port 80 (that IIS handles) to those other ports? For instance: www.vkarlsen.no - IIS svn.vkarlsen.no - port 81 on same machine teamcity.vkarlsen.no - port 82 on same machine Or do I just need to set up those domains and redirect to the correct port? I'd like the domain name and url to be transparent to the user, but perhaps that won't work. Can anyone shed some light on this?

  Read the article

• Relay thru external SMTP server on Exchange 2010

  - by MadBoy

  My client has dynamic IP on which he hosts Exchange 2010 with POP3 Connector running and gathering emails from his current hosting. Until he gets static IP he wants to send emails out. This will work most of the time but some servers won't accept such email sent by Exchange (from dynamic ip due to multiple reasons) so I would like to make a relay thru external SMTP server which hosts current mailboxes. Normally SMTP server could be set up to allow relay thru it but this would require static IP to be allowed on that server so it would know which IP is allowed to relay thru it. Or is there a way to setup relay in Exchange 2010 so it can use dynamic IP and kinda authenticates with user/password itself on the hosted server?

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• Customizable mail server - what are my options? [closed]

  - by disappearedng

  This question was originally on SO but it was closed since it is considered off topic. I am interested to build a mail service that allows you to incorporate custom logic in the your mail server. For example, user A can reply to [email protected] once and subsequent emails from user A to [email protected] will not go through until certain actions are taken. I am looking for something simple and customizable, preferably open-sourced. I am fluent in most modern languages. What email servers do you guys recommend for this? Mailgun looks promising, but are there any simpler options?

  Read the article

• Easy Deployment Split Tunnel VPN Connection

  - by Joey Harris

  I was wondering if anybody could offer some insight as to how I can mass deploy VPN connection settings that support split tunneling. It has to work on both Mac and Windows systems though if a script is used, it obviously can be 2 separate scripts for both platforms. I will be setting up a Windows server with a file server and Exchange server and to access the file server I will have the clients go through VPN because we will have sensitive data. I don't want the servers network to be bogged down with the clients normal internet traffic so I will be needing some way to setup split tunneling on the clients without them having to put in a few commands every time to setup the static routes. Ive looked at Cisco VPN client but I want to try and stick with windows RRAS and avoid buying a Cisco VPN endpoint. Im basically looking for a good VPN client that can support split tunneling and mass deployment.

  Read the article

• Throttle connections to web service if load gets too high?

  - by Joseph Turian

  I have a web site that communicates via XMLRPC with an XMLRPC server web service. (The web service is written in Python using xmlrpclib.) I believe that xmlrpclib will block while it is handling one request. So if there are three users with an xmlrpclib request ahead of you, your response takes four times as long. How do I handle it if I receive too many XMLRPC requests and the web service gets bogged down and has slow response time? If I am getting slashdotted, my preferred behavior is that the first users get good response times and everyone else is told to come back later. I think this is superior to giving everyone terrible response times. How do I create this behavior? Is this called load-balancing? I am not actually balancing though, until I have multiple servers.

  Read the article

• Disable/enable the proxy on a tab by tab basis in Firefox

  - by Rich

  Is it possible to disable/enable the proxy connection on a tab-by-tab basis in Firefox? I can access the internet with the proxy enabled, and I can access our internal servers with the proxy disabled, but neither configuration allows the other. I have a feeling that Firefox 4's per tab profiles may permit this, but was wondering whether there was a way to achieve this on Firefox 3.6.13, perhaps through the use of an extension. For the moment I'm making do with quickProxy (not QuickProxy which I've just discovered while trying to find quickProxy) which allows me to switch the proxy on and off for the whole browser, but would prefer something more fine-grained.

  Read the article

• Cannot upgrade to Lion using DVD

  - by James

  When I first setup my MBP on 10.6 I made a lot of newb mistakes, and was unable to get Ruby on Rails to install, amongst a lot of other things. Because of this, I decided to backup everything on to a Time Machine HDD and re-install Lion. I had a bunch of problems but managed to sort them out, requiring me to go back to 10.6 from the original disc that came with the MBP. Before I did anything however, I burnt the Lion installer that I got from the App Store to a DVD. Now though, when I try to run it, I get the following: Cannot download additional components. I've managed to download software updates, so I know it can connect to the Apple servers.

  Read the article

• SharePoint 2010 not seeing Active Directory users

  - by user117927

  I'm pretty new to Active Directory and SharePoint but I was given to understand they are supposed to play well together. Now I have successfully set up AD with multiple user accounts that work on any member computer. I have also successfully installed SharePoint 2010 Server on an AD machine. Both the AD server and SharePoint servers are on separate machines (VMs running on ESXi to be precise). I can only log on with user accounts I create on the local server. Furthermore the user browser thing for adding users will only see local users. I've followed the advice here http://technet.microsoft.com/en-us/library/cc262350.aspx#section2 for Classic authentication and also NTLM claims based authentication but to no avail. Is there something fundamental I am getting wrong here? I'd be really thankful for any help you can lend me; I've been googling and scratching my head for a couple of days now. P

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >