Search Results

Search found 6898 results on 276 pages for 'messages'.

Page 214/276 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Connect from Mac OS X to Windows 7 Desktop

    - by jrn
    I am trying to connect from my MacBook to my Windows 7 machine within my own network - if it will work from outside my network that's a plus but no need to have. My Windows 7 machine is freshly installed with Windows 7 Home Premium. It runs the built-in firewall with no settings changed so far as well as Microsoft Security Essentials. So far I tried CoRD and Microsofts Remote Desktop Connections to connect from my Mac to my Windows machine without any success. I did try and disabled the firewall on my Windows machine but could not connect either. The reason I did this was to check wether there is a Windows firewall setting preventing me from connecting. On top of that I manually started the Remote Desktop Services and Remote Desktop Configuration within services.msc. Is there anything else I have to enable for a remote desktop connection? Could there be any router setting I have to tweak? Since I do not want to connect from outside my own network I thought I don't have to do any port forwarding. The error messages I retrieve are all connection timeouts. I can however ping the hostname and/or IP address. Any help would be greatly appreciated. Thanks a lot, jrn

    Read the article

  • Convert Public Folder to Shared Mailbox

    - by Lilienthal
    Due to a change in company policy, all existing Public Folders (PF) have to be phased out in favour of shared mailboxes. Unfortunately, they don't seem to have any procedures or guidelines for this migration and I can't find much online either. I've already migrated one of our public folders so far as a sort of test case. Because we still use Exchange 2003, we can't create real shared mailboxes as we would in 2007 or 2010 (With New-Mailbox -Shared ... in the Exchange Shell). Instead, I simply created a new account on the AD and assigned it a mailbox. I then set the PF's permissions to read-only to keep it in a consistent state and copied the entire folder to a local PST in Outlook 2010, from which the folder was in turn copied to the new mailbox. Permissions and Folder Visible were set for all users and the migration was successful. While this works, the whole procedure feels very hackish to me and not at all efficient. I'd welcome some input on automating or at least streamlining the process. Additionally, we are unsure of what to do with our mail-enabled Public Folders. Several of these are nested under other PFs, some of which are also mail-enabled. Preserving folder structure is a key requirement and this seems impossible at first glance. I've considered creating dummy accounts for all the email addresses from our mail-enabled PFs and then setting up automated rules to forward messages to a subfolder of the new shared mailboxes, but I am not familiar enough with Exchange to know if this is even possible. Further points of concern are the Calendars and Contact lists in our public folders. I suppose I'll be forced to create new mailboxes for every one of these we have as well, then set up share permissions for their Calendar and Contact items, but would be happy to be proven wrong.

    Read the article

  • Jabber client for windows 7

    - by Anders
    I am looking for a jabber client with some specific functions. I have spent 1½ day looking for one and it is getting tiresome. Clients that I have been using, that have what I need, but I am not interesting for a reason in are: Pidgin, does not show complete messages in their popups. Miranda IM, I have a constant disconnect issue that does not seem to be resolved in my case. What I need are: Popups A popup that shows broadcasts to users. A popup that show when my username is typed in a conference chat. I need to be able to view the full message in the popup. No configuration of a theme to make this enabled, or if there is a working theme for it already. Preferable placement is on the top right of the screen. Able to 'popup' when running full screen applications, much like games. Conferences Easy access to bookmarked conferences. I do not want to go through submenus to rejoin a disconnected or closed conference. If I close the conference window I want to be connected to the conference until I exit the client. Tabbed interface. Configuration Sober configurations, options are great but there is a limit and the above needs to be availble in the options in a understandable manner. What I wish for: MSN Not needed! If it is avaible then it is a big plus. Facebook Not needed! If it is avaible then it is a big plus. Conferences/chats Not needed! Eyecandy is always nice.

    Read the article

  • How to diagnose a spontaneous reboot?

    - by Spectralist
    My computer reboots, seemingly completely at random, about once every week to two weeks but has occasionally gone months. It just goes from running fine to the POST with no error messages or anything and doesn't seem to be due to heat or usage as it's happened a couple of times when the computer has booted just a few moments ago and is idling. It's been happening for as long as I've had this computer, almost two years. It's happened in both Vista and Windows7. I strongly suspect it's a hardware problem. But due to the rareish and random nature of the crashes my normal strategy of just removing hardware until the problem stops isn't really practical. My guess would be Power Supply, Ram, or Motherboard. But I just don't know how to test an issue this random and want to figure out how to confirm which it is before I go replacing things. So is there some software or hardware that can be used to test these sorts of errors? I did run memtest86 for about 8 hours without finding any issues. And the power supply is more than capable of running my system.

    Read the article

  • Debian 7 and PHP 5.4.4 error reporting

    - by milovan
    I use default php.ini and then in my PHP script (local.settings.php in Drupal) I simply set ini_set('error_reporting', 'E_ALL & ~E_NOTICE & ~E_STRICT'); According to documentation this means "show all messages minus notice and strict warnings". But in my case it still shows strict warnings! I have no idea why, because I clearly stated "~E_STRICT". If I comment it out then I see strict warnings. So it means that default from php.ini "E_ALL & ~E_DEPRECATED & ~E_STRICT" didn't do its job as it also has "~E_STRICT" but I still see strict warnings. On Debian 6 there was Suhoshin patch which was controlling usage of php_ini in PHP scripts. Especially when you try to get more memory than defined cap. Now on debian 7 there is no Suhoshin nor any other security element that might control php_ini. So what might cause php_ini not to be executed? Is there some new variable / setup / other that needs to be checked?

    Read the article

  • NFS server hangs after 3 minutes

    - by John P
    I have a VPS running Centos 6.3 with a fully updated NFS. When I mount the NFS directory from the client, everything works perfectly fine for approximately 3 minutes, then the client hangs attempting to see the directory. nfs-utils-1.2.3-26.el6.x86_64 service nfs status rpc.svcgssd is stopped rpc.mountd (pid 2544) is running... nfsd (pid 2609 2608 2607 2606 2605 2604 2603 2602) is running... rpc.rquotad (pid 2540) is running... cat /etc/exports /home/user XX.XX.XX.20(rw,async,no_root_squash) The client is running Centos 5.8. The directory is mounted using mount x.x.x.6:/home/user /mnt When everything is working, I get the following on the client: /usr/sbin/rpcinfo -p X.X.X.6 | grep mountd 100005 1 udp 892 mountd 100005 1 tcp 892 mountd 100005 2 udp 892 mountd 100005 2 tcp 892 mountd 100005 3 udp 892 mountd 100005 3 tcp 892 mountd When it stops working, rpcinfo just hangs on the client, however running the above command on the server does return data. There are no logs on the NFS Server side that would indicate an issue. On the client side, I see: cat /var/log/messages kernel: nfs: server X.X.X.6 not responding, still trying The client and server are plugged into the same switch, however they are on different networks. The server is a VPS while the client is a dedicated box. SELINUX is in permissive mode on both client and server, and I've turned iptables off on the server to make sure that was not causing an issue. Any ideas would be helpful - right now I'm having to restart NFS every two minutes in a cron job to keep it semi working. Thanks

    Read the article

  • Exchange 2003 - The Case of the Disappearing Message

    - by John Gardeniers
    We run a single Exchange 2003 Standard server. On two separate occasions we have had the following happen, both times with the same sender and recipients. A user with an an email address in domain A sends a message to two others with email addresses in domain B. I must stress that this is all internal and on the same Exchange server. Both recipients were listed in the "to" field. The first listed recipient received the message, the other didn't. Checking message tracking in ESM, as well as manually checking the server Application event log, indicates that both messages were delivered without a hitch. However, the message just cannot be found in the second recipient's mailbox. Using both Outlook and OWA I have searched all the recipient's Outlook folders, in case it accidentally got moved to another folder or was deleted. I also checked the deleted message recovery folder. No sign of it anywhere. I'm completely baffled. How could a message that the system insists was delivered not actually be in the recipient's mailbox? What else can I do to try and track it down?

    Read the article

  • Can't install flash on Firefox or Chrome (but works fine on IE...)

    - by WP
    I'm using a work computer (Lenovo) that I recently got from my IT department to replace an old machine. When I installed Firefox and Chrome, I needed to install Adobe Flash. However, the installation has failed on several occasions. I've taken all the usual steps: closing all programs and windows, installing updates and restarting machine, etc, but still the installation does not work. The download manager and status bars say that installation is complete, but I still can't view flash sites on FF or Chrome. Flash is working fine on IE though. Last thing: when I reboot the first dialog box that comes up is from Adobe Download Manager, and it says "Please shut down Internet Explorer before uninstall can complete". I'm confused since a) I've just rebooted so have yet to start IE and b) why UNinstall? My company does not support non-IE browsers so I'm not getting much help from our IT department. If necessary I can post screenshots of error messages and stuff if it comes to that, but hopefully someone will be able to diagnose the problem before that's necessary as I'm not the most tech savvy (despite being a huge fan of reddit...)

    Read the article

  • XSD: how to use 'unique' & 'key'/'keyref' with element values?

    - by Koohoolinn
    I trying to use and / with element values but I just can't get it to work. If I do it with attrubute values it works like a charm. Test.xml <test:config xmlns:test="http://www.example.org/Test" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.example.org/Test Test.xsd "> <test:location id="id1" path="/path2"> <test:roles> <test:role>role1</test:role> <test:role>role2</test:role> <test:role>role2</test:role> <!-- DUPLICATE: FAIL VALIDATION --> </test:roles> <test:action name="action1"> <test:roles> <test:role>role1</test:role> <test:role>role1</test:role> <!-- DUPLICATE: FAIL VALIDATION --> <test:role>role3</test:role> <!-- NOT DEFINED: FAIL VALIDATION --> </test:roles> </test:action> </test:location> </test:config> I want ensure that roles are only defined once and that the roles defined under the action element are only those defined at the upper level. Test.xsd <xs:element name="config"> <xs:complexType> <xs:sequence> <xs:element ref="test:location" maxOccurs="unbounded" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="location" type="test:LocationType"> <xs:key name="keyRole"> <xs:selector xpath="test:roles" /> <xs:field xpath="test:role" /> </xs:key> <xs:keyref name="keyrefRole" refer="test:keyRole"> <xs:selector xpath="test:action/test:roles" /> <xs:field xpath="test:role" /> </xs:keyref> </xs:element> <xs:complexType name="LocationType"> <xs:sequence> <xs:element ref="test:roles" minOccurs="0" /> <xs:element name="action" type="test:ActionType" minOccurs="0" maxOccurs="unbounded"/> </xs:sequence> <xs:attribute name="id" type="xs:string" use="required"/> <xs:attribute name="path" type="xs:string" use="required"/> </xs:complexType> <xs:element name="roles" type="test:RolesType"> <xs:unique name="uniqueRole"> <xs:selector xpath="." /> <xs:field xpath="test:role" /> </xs:unique> </xs:element> <xs:complexType name="RolesType"> <xs:sequence> <xs:element name="role" type="xs:string" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> <xs:complexType name="ActionType"> <xs:sequence> <xs:element ref="test:roles" /> </xs:sequence> <xs:attribute name="name" type="xs:string" use="required" /> </xs:complexType> The validation fails with these messages: Description Resource Path Location Type cvc-identity-constraint.3: Field "./test:role" of identity constraint "keyrefRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 15 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "keyrefRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 16 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "keyRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 9 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "keyRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 10 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "uniqueRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 9 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "uniqueRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 10 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "uniqueRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 15 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "uniqueRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 16 XML Problem cvc-identity-constraint.4.1: Duplicate unique value [role1] declared for identity constraint "uniqueRole" of element "roles". Test.xml /filebrowser-ejb/src/test/resources line 9 XML Problem cvc-identity-constraint.4.1: Duplicate unique value [role1] declared for identity constraint "uniqueRole" of element "roles". Test.xml /filebrowser-ejb/src/test/resources line 15 XML Problem cvc-identity-constraint.4.2.2: Duplicate key value [role1] declared for identity constraint "keyRole" of element "location". Test.xml /filebrowser-ejb/src/test/resources line 9 XML Problem cvc-identity-constraint.4.3: Key 'keyrefRole' with value 'role3' not found for identity constraint of element 'location'. Test.xml /filebrowser-ejb/src/test/resources line 19 XML Problem If I comment out the lines that should fail, validation still fails now with these messages: Description Resource Path Location Type cvc-identity-constraint.3: Field "./test:role" of identity constraint "keyRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 10 XML Problem cvc-identity-constraint.3: Field "./test:role" of identity constraint "uniqueRole" matches more than one value within the scope of its selector; fields must match unique values. Test.xml /filebrowser-ejb/src/test/resources line 10 XML Problem What am I doing wrong?

    Read the article

  • yui compressor maven plugin doesnt compress the js files

    - by hanumant
    I am using yui compressor to compress the js files in my web app. I have configured the plugin as indicated on yui maven plugin site yui compressor maven plugin. This is the pom plugin conf <plugin> <groupId>net.sf.alchim</groupId> <artifactId>yuicompressor-maven-plugin</artifactId> <version>0.7.1</version> <executions> <execution> <phase>compile</phase> <goals> <goal>jslint</goal> <goal>compress</goal> </goals> </execution> </executions> <configuration> <failOnWarning>true</failOnWarning> <nosuffix>true</nosuffix> <force>true</force> <aggregations> <aggregation> <!-- remove files after aggregation (default: false) --> <removeIncluded>false</removeIncluded> <!-- insert new line after each concatenation (default: false) --> <insertNewLine>false</insertNewLine> <output>${project.basedir}/${webcontent.dir}/js/compressedAll.js</output> <!-- files to include, path relative to output's directory or absolute path--> <!--inputDir>base directory for non absolute includes, default to parent dir of output</inputDir--> <includes> <include>**/autocomplete.js</include> <include>**/calendar.js</include> <include>**/dialogs.js</include> <include>**/download.js</include> <include>**/folding.js</include> <include>**/jquery-1.4.2.min.js</include> <include>**/jquery.bgiframe.min.js</include> <include>**/jquery.loadmask.js</include> <include>**/jquery.printelement-1.1.js</include> <include>**/jquery.tablesorter.mod.js</include> <include>**/jquery.tablesorter.pager.js</include> <include>**/jquery.dialogs.plugin.js</include> <include>**/jquery.ui.autocomplete.js</include> <include>**/jquery.validate.js</include> <include>**/jquery-ui-1.8.custom.min.js</include> <include>**/languageDropdown.js</include> <include>**/messages.js</include> <include>**/print.js</include> <include>**/tables.js</include> <include>**/tabs.js</include> <include>**/uwTooltip.js</include> </includes> <!-- files to exclude, path relative to output's directory--> </aggregation> </aggregations> </configuration> <dependencies> <dependency> <groupId>rhino</groupId> <artifactId>js</artifactId> <scope>compile</scope> <version>1.6R5</version> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-plugin-api</artifactId> <version>2.0.7</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-project</artifactId> <version>2.0.7</version> <scope>provided</scope> </dependency><dependency> <groupId>net.sf.retrotranslator</groupId> <artifactId>retrotranslator-runtime</artifactId> <version>1.2.9</version> <scope>runtime</scope> </dependency> </dependencies> </plugin> And here is the log at compress time These will use the artifact files already in the core ClassRealm instead, to allow them to be included in PluginDescriptor.getArtifacts(). [DEBUG] Configuring mojo 'net.sf.alchim:yuicompressor-maven-plugin:0.7.1:jslint' [DEBUG] (f) failOnWarning = true [DEBUG] (f) jswarn = true [DEBUG] (f) outputDirectory = C:\test\target\classes [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\src, PatternSet [includes: {}, excludes: {**/*.class, **/*.java, site/*}]}}] [DEBUG] (f) sourceDirectory = C:\test\src\..\js [DEBUG] (f) warSourceDirectory = C:\test\src\main\webapp [DEBUG] (f) webappDirectory = C:\test\target\test2-19-SNAPSHOT [DEBUG] -- end configuration -- [INFO] [yuicompressor:jslint {execution: default}] [INFO] nb warnings: 0, nb errors: 0 [DEBUG] Configuring mojo 'net.sf.alchim:yuicompressor-maven-plugin:0.7.1:compress' -- [DEBUG] (f) removeIncluded = false [DEBUG] (f) insertNewLine = false [DEBUG] (f) output = C:\test\WebContent\js\compressedAll.js [DEBUG] (f) includes = [**/autocomplete.js, **/calendar.js, **/dialogs.js, **/download.js, **/folding.js, **/jquery-1.4.2.min.js, **/jquery.bgifram e.min.js, **/jquery.loadmask.js, **/jquery.printelement-1.1.js, **/jquery.tablesorter.mod.js, **/jquery.tablesorter.pager.js, **/jquery.dialogs.p lugin.js, **/jquery.ui.autocomplete.js, **/jquery.validate.js, **/jquery-ui-1.8.custom.min.js, **/languageDropdown.js, **/messages.js, **/print.js, * */tables.js, **/tabs.js, **/uwTooltip.js] [DEBUG] (f) aggregations = [net.sf.alchim.mojo.yuicompressor.Aggregation@65646564] [DEBUG] (f) disableOptimizations = false [DEBUG] (f) encoding = Cp1252 [DEBUG] (f) failOnWarning = true [DEBUG] (f) force = true [DEBUG] (f) gzip = false [DEBUG] (f) jswarn = true [DEBUG] (f) linebreakpos = 0 [DEBUG] (f) nomunge = false [DEBUG] (f) nosuffix = true [DEBUG] (f) outputDirectory = C:\test\target\classes [DEBUG] (f) preserveAllSemiColons = false [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\src, PatternSet [includes: {}, excludes: {**/*.class, **/*.java, site/*}]}}] [DEBUG] (f) sourceDirectory = C:\test\src\..\js [DEBUG] (f) statistics = true [DEBUG] (f) suffix = -min [DEBUG] (f) warSourceDirectory = C:\test\src\main\webapp [DEBUG] (f) webappDirectory = C:\test\target\test2-19-SNAPSHOT [DEBUG] -- end configuration -- [INFO] [yuicompressor:compress {execution: default}] [INFO] generate aggregation : C:\test\WebContent\js\compressedAll.js [INFO] compressedAll.js (407505b) [INFO] nb warnings: 0, nb errors: 0 [DEBUG] Configuring mojo 'org.apache.maven.plugins:maven-resources-plugin:2.2:testResources' -- [DEBUG] (f) filters = [] [DEBUG] (f) outputDirectory = C:\test\target\test-classes [DEBUG] (f) project = MavenProject: com.test.test1:test2:19-SNAPSHOT @ C:\test\pom.xml [DEBUG] (f) resources = [Resource {targetPath: null, filtering: false, FileSet {directory: C:\test\test , PatternSet [includes: {}, excludes: {**/*.class, **/*.java}]}}] [DEBUG] -- end configuration -- The problem is the files are getting aggregated into one file but without compressing. The link above uses version 1.1 and the plugin version I am using is 0.7.1. Is this going to make any diff. Can someone tell what is wrong here. PS: I have obfuscated some text in log to follow the compliance in my firm. So you may find it mismatching somewhere.

    Read the article

  • C# .Net 3.5 Asynchronous Socket Server Performance Problem

    - by iBrAaAa
    I'm developing an Asynchronous Game Server using .Net Socket Asynchronous Model( BeginAccept/EndAccept...etc.) The problem I'm facing is described like that: When I have only one client connected, the server response time is very fast but once a second client connects, the server response time increases too much. I've measured the time from a client sends a message to the server until it gets the reply in both cases. I found that the average time in case of one client is about 17ms and in case of 2 clients about 280ms!!! What I really see is that: When 2 clients are connected and only one of them is moving(i.e. requesting service from the server) it is equivalently equal to the case when only one client is connected(i.e. fast response). However, when the 2 clients move at the same time(i.e. requests service from the server at the same time) their motion becomes very slow (as if the server replies each one of them in order i.e. not simultaneously). Basically, what I am doing is that: When a client requests a permission for motion from the server and the server grants him the request, the server then broadcasts the new position of the client to all the players. So if two clients are moving in the same time, the server is eventually trying to broadcast to both clients the new position of each of them at the same time. EX: Client1 asks to go to position (2,2) Client2 asks to go to position (5,5) Server sends to each of Client1 & Client2 the same two messages: message1: "Client1 at (2,2)" message2: "Client2 at (5,5)" I believe that the problem comes from the fact that Socket class is thread safe according MSDN documentation http://msdn.microsoft.com/en-us/library/system.net.sockets.socket.aspx. (NOT SURE THAT IT IS THE PROBLEM) Below is the code for the server: /// /// This class is responsible for handling packet receiving and sending /// public class NetworkManager { /// /// An integer to hold the server port number to be used for the connections. Its default value is 5000. /// private readonly int port = 5000; /// /// hashtable contain all the clients connected to the server. /// key: player Id /// value: socket /// private readonly Hashtable connectedClients = new Hashtable(); /// /// An event to hold the thread to wait for a new client /// private readonly ManualResetEvent resetEvent = new ManualResetEvent(false); /// /// keeps track of the number of the connected clients /// private int clientCount; /// /// The socket of the server at which the clients connect /// private readonly Socket mainSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); /// /// The socket exception that informs that a client is disconnected /// private const int ClientDisconnectedErrorCode = 10054; /// /// The only instance of this class. /// private static readonly NetworkManager networkManagerInstance = new NetworkManager(); /// /// A delegate for the new client connected event. /// /// the sender object /// the event args public delegate void NewClientConnected(Object sender, SystemEventArgs e); /// /// A delegate for the position update message reception. /// /// the sender object /// the event args public delegate void PositionUpdateMessageRecieved(Object sender, PositionUpdateEventArgs e); /// /// The event which fires when a client sends a position message /// public PositionUpdateMessageRecieved PositionUpdateMessageEvent { get; set; } /// /// keeps track of the number of the connected clients /// public int ClientCount { get { return clientCount; } } /// /// A getter for this class instance. /// /// only instance. public static NetworkManager NetworkManagerInstance { get { return networkManagerInstance; } } private NetworkManager() {} /// Starts the game server and holds this thread alive /// public void StartServer() { //Bind the mainSocket to the server IP address and port mainSocket.Bind(new IPEndPoint(IPAddress.Any, port)); //The server starts to listen on the binded socket with max connection queue //1024 mainSocket.Listen(1024); //Start accepting clients asynchronously mainSocket.BeginAccept(OnClientConnected, null); //Wait until there is a client wants to connect resetEvent.WaitOne(); } /// /// Receives connections of new clients and fire the NewClientConnected event /// private void OnClientConnected(IAsyncResult asyncResult) { Interlocked.Increment(ref clientCount); ClientInfo newClient = new ClientInfo { WorkerSocket = mainSocket.EndAccept(asyncResult), PlayerId = clientCount }; //Add the new client to the hashtable and increment the number of clients connectedClients.Add(newClient.PlayerId, newClient); //fire the new client event informing that a new client is connected to the server if (NewClientEvent != null) { NewClientEvent(this, System.EventArgs.Empty); } newClient.WorkerSocket.BeginReceive(newClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), newClient); //Start accepting clients asynchronously again mainSocket.BeginAccept(OnClientConnected, null); } /// Waits for the upcoming messages from different clients and fires the proper event according to the packet type. /// /// private void WaitForData(IAsyncResult asyncResult) { ClientInfo sendingClient = null; try { //Take the client information from the asynchronous result resulting from the BeginReceive sendingClient = asyncResult.AsyncState as ClientInfo; // If client is disconnected, then throw a socket exception // with the correct error code. if (!IsConnected(sendingClient.WorkerSocket)) { throw new SocketException(ClientDisconnectedErrorCode); } //End the pending receive request sendingClient.WorkerSocket.EndReceive(asyncResult); //Fire the appropriate event FireMessageTypeEvent(sendingClient.ConvertBytesToPacket() as BasePacket); // Begin receiving data from this client sendingClient.WorkerSocket.BeginReceive(sendingClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), sendingClient); } catch (SocketException e) { if (e.ErrorCode == ClientDisconnectedErrorCode) { // Close the socket. if (sendingClient.WorkerSocket != null) { sendingClient.WorkerSocket.Close(); sendingClient.WorkerSocket = null; } // Remove it from the hash table. connectedClients.Remove(sendingClient.PlayerId); if (ClientDisconnectedEvent != null) { ClientDisconnectedEvent(this, new ClientDisconnectedEventArgs(sendingClient.PlayerId)); } } } catch (Exception e) { // Begin receiving data from this client sendingClient.WorkerSocket.BeginReceive(sendingClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), sendingClient); } } /// /// Broadcasts the input message to all the connected clients /// /// public void BroadcastMessage(BasePacket message) { byte[] bytes = message.ConvertToBytes(); foreach (ClientInfo client in connectedClients.Values) { client.WorkerSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, SendAsync, client); } } /// /// Sends the input message to the client specified by his ID. /// /// /// The message to be sent. /// The id of the client to receive the message. public void SendToClient(BasePacket message, int id) { byte[] bytes = message.ConvertToBytes(); (connectedClients[id] as ClientInfo).WorkerSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, SendAsync, connectedClients[id]); } private void SendAsync(IAsyncResult asyncResult) { ClientInfo currentClient = (ClientInfo)asyncResult.AsyncState; currentClient.WorkerSocket.EndSend(asyncResult); } /// Fires the event depending on the type of received packet /// /// The received packet. void FireMessageTypeEvent(BasePacket packet) { switch (packet.MessageType) { case MessageType.PositionUpdateMessage: if (PositionUpdateMessageEvent != null) { PositionUpdateMessageEvent(this, new PositionUpdateEventArgs(packet as PositionUpdatePacket)); } break; } } } The events fired are handled in a different class, here are the event handling code for the PositionUpdateMessage (Other handlers are irrelevant): private readonly Hashtable onlinePlayers = new Hashtable(); /// /// Constructor that creates a new instance of the GameController class. /// private GameController() { //Start the server server = new Thread(networkManager.StartServer); server.Start(); //Create an event handler for the NewClientEvent of networkManager networkManager.PositionUpdateMessageEvent += OnPositionUpdateMessageReceived; } /// /// this event handler is called when a client asks for movement. /// private void OnPositionUpdateMessageReceived(object sender, PositionUpdateEventArgs e) { Point currentLocation = ((PlayerData)onlinePlayers[e.PositionUpdatePacket.PlayerId]).Position; Point locationRequested = e.PositionUpdatePacket.Position; ((PlayerData)onlinePlayers[e.PositionUpdatePacket.PlayerId]).Position = locationRequested; // Broadcast the new position networkManager.BroadcastMessage(new PositionUpdatePacket { Position = locationRequested, PlayerId = e.PositionUpdatePacket.PlayerId }); }

    Read the article

  • How to know if the client has terminated in sockets

    - by shadyabhi
    Suppose, I have a connected socket after writing this code.. if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } How can I know at the server side that client has exited. My whole program actually does the following.. Accepts a connection from client Starts a new thread that reads messages from that particular client and then broadcast this message to all the connected clients. If you want to see the whole code... In this whole code. I am also struggling with one more problem that whenever I kill a client with Ctrl+C, my server terminates abruptly.. It would be nice if anyone could suggest what the problem is.. #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <signal.h> #include <errno.h> #include <pthread.h> /*CONSTANTS*/ #define DEFAULT_PORT 10000 #define LISTEN_QUEUE_LIMIT 6 #define TOTAL_CLIENTS 10 #define CHAR_BUFFER 256 /*GLOBAL VARIABLE*/ int current_client = 0; int connected_clients[TOTAL_CLIENTS]; extern int errno; void *client_handler(void * socket_d); int main(int argc, char *argv[]) { struct sockaddr_in server_addr;/* structure to hold server's address*/ int socket_d; /* listening socket descriptor */ int port; /* protocol port number */ int option_value; /* needed for setsockopt */ pthread_t tid[TOTAL_CLIENTS]; port = (argc > 1)?atoi(argv[1]):DEFAULT_PORT; /* Socket Server address structure */ memset((char *)&server_addr, 0, sizeof(server_addr)); server_addr.sin_family = AF_INET; /* set family to Internet */ server_addr.sin_addr.s_addr = INADDR_ANY; /* set the local IP address */ server_addr.sin_port = htons((u_short)port); /* Set port */ /* Create socket */ if ( (socket_d = socket(PF_INET, SOCK_STREAM, 0)) < 0) { fprintf(stderr, "socket creation failed\n"); exit(1); } /* Make listening socket's port reusable */ if (setsockopt(socket_d, SOL_SOCKET, SO_REUSEADDR, (char *)&option_value, sizeof(option_value)) < 0) { fprintf(stderr, "setsockopt failure\n"); exit(1); } /* Bind a local address to the socket */ if (bind(socket_d, (struct sockaddr *)&server_addr, sizeof(server_addr)) < 0) { fprintf(stderr, "bind failed\n"); exit(1); } /* Specify size of request queue */ if (listen(socket_d, LISTEN_QUEUE_LIMIT) < 0) { fprintf(stderr, "listen failed\n"); exit(1); } memset(connected_clients,0,sizeof(int)*TOTAL_CLIENTS); for (;;) { struct sockaddr_in client_addr; /* structure to hold client's address*/ int alen = sizeof(client_addr); /* length of address */ int sd; /* connected socket descriptor */ if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } else printf("\n I got a connection from (%s , %d)\n",inet_ntoa(client_addr.sin_addr),ntohs(client_addr.sin_port)); if (pthread_create(&tid[current_client],NULL,(void *)client_handler,(void *)sd) != 0) { perror("pthread_create error"); continue; } connected_clients[current_client]=sd; current_client++; /*Incrementing Client number*/ } return 0; } void *client_handler(void *connected_socket) { int sd; sd = (int)connected_socket; for ( ; ; ) { ssize_t n; char buffer[CHAR_BUFFER]; for ( ; ; ) { if (n = read(sd, buffer, sizeof(char)*CHAR_BUFFER) == -1) { perror("Error reading from client"); pthread_exit(1); } int i=0; for (i=0;i<current_client;i++) { if (write(connected_clients[i],buffer,sizeof(char)*CHAR_BUFFER) == -1) perror("Error sending messages to a client while multicasting"); } } } } My client side is this (Maye be irrelevant while answering my question) #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <stdlib.h> void error(char *msg) { perror(msg); exit(0); } void *listen_for_message(void * fd) { int sockfd = (int)fd; int n; char buffer[256]; bzero(buffer,256); printf("YOUR MESSAGE: "); fflush(stdout); while (1) { n = read(sockfd,buffer,256); if (n < 0) error("ERROR reading from socket"); if (n == 0) pthread_exit(1); printf("\nMESSAGE BROADCAST: %sYOUR MESSAGE: ",buffer); fflush(stdout); } } int main(int argc, char *argv[]) { int sockfd, portno, n; struct sockaddr_in serv_addr; struct hostent *server; pthread_t read_message; char buffer[256]; if (argc < 3) { fprintf(stderr,"usage %s hostname port\n", argv[0]); exit(0); } portno = atoi(argv[2]); sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) error("ERROR opening socket"); server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr, server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); bzero(buffer,256); if (pthread_create(&read_message,NULL,(void *)listen_for_message,(void *)sockfd) !=0 ) { perror("error creating thread"); } while (1) { fgets(buffer,255,stdin); n = write(sockfd,buffer,256); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); } return 0; }

    Read the article

  • .Net 3.5 Asynchronous Socket Server Performance Problem

    - by iBrAaAa
    I'm developing an Asynchronous Game Server using .Net Socket Asynchronous Model( BeginAccept/EndAccept...etc.) The problem I'm facing is described like that: When I have only one client connected, the server response time is very fast but once a second client connects, the server response time increases too much. I've measured the time from a client sends a message to the server until it gets the reply in both cases. I found that the average time in case of one client is about 17ms and in case of 2 clients about 280ms!!! What I really see is that: When 2 clients are connected and only one of them is moving(i.e. requesting service from the server) it is equivalently equal to the case when only one client is connected(i.e. fast response). However, when the 2 clients move at the same time(i.e. requests service from the server at the same time) their motion becomes very slow (as if the server replies each one of them in order i.e. not simultaneously). Basically, what I am doing is that: When a client requests a permission for motion from the server and the server grants him the request, the server then broadcasts the new position of the client to all the players. So if two clients are moving in the same time, the server is eventually trying to broadcast to both clients the new position of each of them at the same time. EX: Client1 asks to go to position (2,2) Client2 asks to go to position (5,5) Server sends to each of Client1 & Client2 the same two messages: message1: "Client1 at (2,2)" message2: "Client2 at (5,5)" I believe that the problem comes from the fact that Socket class is thread safe according MSDN documentation http://msdn.microsoft.com/en-us/library/system.net.sockets.socket.aspx. (NOT SURE THAT IT IS THE PROBLEM) Below is the code for the server: /// /// This class is responsible for handling packet receiving and sending /// public class NetworkManager { /// /// An integer to hold the server port number to be used for the connections. Its default value is 5000. /// private readonly int port = 5000; /// /// hashtable contain all the clients connected to the server. /// key: player Id /// value: socket /// private readonly Hashtable connectedClients = new Hashtable(); /// /// An event to hold the thread to wait for a new client /// private readonly ManualResetEvent resetEvent = new ManualResetEvent(false); /// /// keeps track of the number of the connected clients /// private int clientCount; /// /// The socket of the server at which the clients connect /// private readonly Socket mainSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); /// /// The socket exception that informs that a client is disconnected /// private const int ClientDisconnectedErrorCode = 10054; /// /// The only instance of this class. /// private static readonly NetworkManager networkManagerInstance = new NetworkManager(); /// /// A delegate for the new client connected event. /// /// the sender object /// the event args public delegate void NewClientConnected(Object sender, SystemEventArgs e); /// /// A delegate for the position update message reception. /// /// the sender object /// the event args public delegate void PositionUpdateMessageRecieved(Object sender, PositionUpdateEventArgs e); /// /// The event which fires when a client sends a position message /// public PositionUpdateMessageRecieved PositionUpdateMessageEvent { get; set; } /// /// keeps track of the number of the connected clients /// public int ClientCount { get { return clientCount; } } /// /// A getter for this class instance. /// /// only instance. public static NetworkManager NetworkManagerInstance { get { return networkManagerInstance; } } private NetworkManager() {} /// Starts the game server and holds this thread alive /// public void StartServer() { //Bind the mainSocket to the server IP address and port mainSocket.Bind(new IPEndPoint(IPAddress.Any, port)); //The server starts to listen on the binded socket with max connection queue //1024 mainSocket.Listen(1024); //Start accepting clients asynchronously mainSocket.BeginAccept(OnClientConnected, null); //Wait until there is a client wants to connect resetEvent.WaitOne(); } /// /// Receives connections of new clients and fire the NewClientConnected event /// private void OnClientConnected(IAsyncResult asyncResult) { Interlocked.Increment(ref clientCount); ClientInfo newClient = new ClientInfo { WorkerSocket = mainSocket.EndAccept(asyncResult), PlayerId = clientCount }; //Add the new client to the hashtable and increment the number of clients connectedClients.Add(newClient.PlayerId, newClient); //fire the new client event informing that a new client is connected to the server if (NewClientEvent != null) { NewClientEvent(this, System.EventArgs.Empty); } newClient.WorkerSocket.BeginReceive(newClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), newClient); //Start accepting clients asynchronously again mainSocket.BeginAccept(OnClientConnected, null); } /// Waits for the upcoming messages from different clients and fires the proper event according to the packet type. /// /// private void WaitForData(IAsyncResult asyncResult) { ClientInfo sendingClient = null; try { //Take the client information from the asynchronous result resulting from the BeginReceive sendingClient = asyncResult.AsyncState as ClientInfo; // If client is disconnected, then throw a socket exception // with the correct error code. if (!IsConnected(sendingClient.WorkerSocket)) { throw new SocketException(ClientDisconnectedErrorCode); } //End the pending receive request sendingClient.WorkerSocket.EndReceive(asyncResult); //Fire the appropriate event FireMessageTypeEvent(sendingClient.ConvertBytesToPacket() as BasePacket); // Begin receiving data from this client sendingClient.WorkerSocket.BeginReceive(sendingClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), sendingClient); } catch (SocketException e) { if (e.ErrorCode == ClientDisconnectedErrorCode) { // Close the socket. if (sendingClient.WorkerSocket != null) { sendingClient.WorkerSocket.Close(); sendingClient.WorkerSocket = null; } // Remove it from the hash table. connectedClients.Remove(sendingClient.PlayerId); if (ClientDisconnectedEvent != null) { ClientDisconnectedEvent(this, new ClientDisconnectedEventArgs(sendingClient.PlayerId)); } } } catch (Exception e) { // Begin receiving data from this client sendingClient.WorkerSocket.BeginReceive(sendingClient.Buffer, 0, BasePacket.GetMaxPacketSize(), SocketFlags.None, new AsyncCallback(WaitForData), sendingClient); } } /// /// Broadcasts the input message to all the connected clients /// /// public void BroadcastMessage(BasePacket message) { byte[] bytes = message.ConvertToBytes(); foreach (ClientInfo client in connectedClients.Values) { client.WorkerSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, SendAsync, client); } } /// /// Sends the input message to the client specified by his ID. /// /// /// The message to be sent. /// The id of the client to receive the message. public void SendToClient(BasePacket message, int id) { byte[] bytes = message.ConvertToBytes(); (connectedClients[id] as ClientInfo).WorkerSocket.BeginSend(bytes, 0, bytes.Length, SocketFlags.None, SendAsync, connectedClients[id]); } private void SendAsync(IAsyncResult asyncResult) { ClientInfo currentClient = (ClientInfo)asyncResult.AsyncState; currentClient.WorkerSocket.EndSend(asyncResult); } /// Fires the event depending on the type of received packet /// /// The received packet. void FireMessageTypeEvent(BasePacket packet) { switch (packet.MessageType) { case MessageType.PositionUpdateMessage: if (PositionUpdateMessageEvent != null) { PositionUpdateMessageEvent(this, new PositionUpdateEventArgs(packet as PositionUpdatePacket)); } break; } } } The events fired are handled in a different class, here are the event handling code for the PositionUpdateMessage (Other handlers are irrelevant): private readonly Hashtable onlinePlayers = new Hashtable(); /// /// Constructor that creates a new instance of the GameController class. /// private GameController() { //Start the server server = new Thread(networkManager.StartServer); server.Start(); //Create an event handler for the NewClientEvent of networkManager networkManager.PositionUpdateMessageEvent += OnPositionUpdateMessageReceived; } /// /// this event handler is called when a client asks for movement. /// private void OnPositionUpdateMessageReceived(object sender, PositionUpdateEventArgs e) { Point currentLocation = ((PlayerData)onlinePlayers[e.PositionUpdatePacket.PlayerId]).Position; Point locationRequested = e.PositionUpdatePacket.Position; ((PlayerData)onlinePlayers[e.PositionUpdatePacket.PlayerId]).Position = locationRequested; // Broadcast the new position networkManager.BroadcastMessage(new PositionUpdatePacket { Position = locationRequested, PlayerId = e.PositionUpdatePacket.PlayerId }); }

    Read the article

  • Slow NFS and GFS2 performance

    - by Tiago
    Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

    Read the article

  • prevent outlook stationery from showing up in my email (Outlook 2007)

    - by KevinDeus
    There are some people in my office who insist on using cute stationery and some of it makes messages difficult to read. I really just want to read email on a white background with no distractions. Is there a way to disable stationery on incoming mail in Outlook? (Without switching to "plain text only") yeah, I yanked that description from here but it is very accurate however I've had no luck in finding a solution. Most solutions I see solve the problem by pushing out something to a bunch of users. like : this I don't really have the authority to do that. Not only that, that only prevents ME from setting stationery. this has been asked before to no avail: I don't have time to deal with this, so hopefully there is something I have overlooked. Without switching to "plain text only" I want to be able to change a setting on my computer (it can be. a reg hack, I don't care) that will prevent outlook stationery from showing up in my email it would also be helpful to know how to do it for Outlook 2003 as well.

    Read the article

  • Android - Querying the SMS ContentProvider?

    - by Donal Rafferty
    I currently register a content observer on the following URI "content://sms/" to listen out for incoming and outgoing messages being sent. This seems to work ok and I have also tried deleting from the sms database but I can only delete an entire thread from the following URI "content://sms/conversations/" Here is the code I use for that String url = "content://sms/"; Uri uri = Uri.parse(url); getContentResolver().registerContentObserver(uri, true, new MyContentObserver(handler)); } class MyContentObserver extends ContentObserver { public MyContentObserver(Handler handler) { super(handler); } @Override public boolean deliverSelfNotifications() { return false; } @Override public void onChange(boolean arg0) { super.onChange(arg0); Log.v("SMS", "Notification on SMS observer"); Message msg = new Message(); msg.obj = "xxxxxxxxxx"; handler.sendMessage(msg); Uri uriSMSURI = Uri.parse("content://sms/"); Cursor cur = getContentResolver().query(uriSMSURI, null, null, null, null); cur.moveToNext(); String protocol = cur.getString(cur.getColumnIndex("protocol")); if(protocol == null){ Log.d("SMS", "SMS SEND"); int threadId = cur.getInt(cur.getColumnIndex("thread_id")); Log.d("SMS", "SMS SEND ID = " + threadId); Cursor c = getContentResolver().query(Uri.parse("content://sms/outbox/" + threadId), null, null, null, null); c.moveToNext(); int p = cur.getInt(cur.getColumnIndex("person")); Log.d("SMS", "SMS SEND person= " + p); //getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadId), null, null); } else{ Log.d("SMS", "SMS RECIEVE"); int threadIdIn = cur.getInt(cur.getColumnIndex("thread_id")); getContentResolver().delete(Uri.parse("content://sms/outbox/" + threadIdIn), null, null); } } } However I want to be able to get the recipricant and the message text from the SMS Content Provider, can anyone tell me how to do this? And also how to delete one message instead of an entire thread?

    Read the article

  • SharePoint 2010 - Client Object Model - Add attachment to ListItem

    - by Thorben
    Hi, I have a SharePoint List to which I'm adding new ListItems using the Client Object Model. Adding ListItems is not a problem and works great. Now I want to add attachments. I'm using the SaveBinaryDirect in the following manner: File.SaveBinaryDirect(clientCtx, url.AbsolutePath + "/Attachments/31/" + fileName, inputStream, true); It works without any problem as long as the item that I'm trying to add the attachment to, already has an attachment that was added through the SharePoint site and not using the Client Object Model. When I try to add an attachment to a item that doesnt have any attachments yet, I get the following errors (both happen but not with the same files - but those two messages appear consistently): The remote server returned an error: (409) Conflict The remote server returned an error: (404) Not Found I figured that maybe I need to create the attachment folder first for this item. When I try the following code: clientCtx.Load(ticketList.RootFolder.Folders); clientCtx.ExecuteQuery(); clientCtx.Load(ticketList.RootFolder.Folders[1]); // 1 -> Attachment folder clientCtx.Load(ticketList.RootFolder.Folders[1].Folders); clientCtx.ExecuteQuery(); Folder folder = ticketList.RootFolder.Folders[1].Folders.Add("33"); clientCtx.ExecuteQuery(); I receive an error message saying: Cannot create folder "Lists/Ticket System/Attachment/33" I have full administrator rights for the SharePoint site/list. Any ideas what I could be doing wrong? Thanks, Thorben

    Read the article

  • Xdebug: remote debugging won't stop at breakpoints

    - by Bryan M.
    I'm having a problem with xdebug not stopping at breakpoints when using remote debugging (everything is fine when running scripts via the command line). It will break at the first line of the program, then exit, not catching any breakpoints. It used to work fine, until I switched over to using MacPorts for Apache and PHP. I've tried re-compiling it serveral times (with several versions), but no dice. I'm using PHP 5.3.1 and Xdebug 2.1.0-beta3 I've also tried at least 3 different debugging programs (MacGDBp, Netbeans and JetBrains Web IDE). My php.ini settings look like: [xdebug] xdebug.remote_enable=1 xdebug.remote_handler=dbgp xdebug.remote_mode=req xdebug.remote_port=9000 xdebug.remote_host=localhost xdebug.idekey=webide And when I log the debugger output, setting a breakpoint looks like this/; <- breakpoint_set -i 895 -t line -f file:///Users/WM_imac/Sites/wm/debug_test.php -n 13 -s enabled -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="breakpoint_set" transaction_id="895" state="enabled" id="890660002"></response> When run, the debugger will get the context of the first line of the application, then send the detach and stop messages. However, this line is output when starting the debugger. <- feature_get -i 885 -n breakpoint_types -> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get" transaction_id="885" feature_name="breakpoint_types" supported="1"><![CDATA[line conditional call return exception]]></response> Does 'line conditional call return exception' mean anything?

    Read the article

  • Random pauses with "Key dispatching timed out sending to <null>" when closing Android SurfaceView

    - by kenyee
    When I close an Android SurfaceView Activity, the app sometimes pauses and almost gets an ANR (Application Not Responding) message. Looking at LogCat, it appears to be timing out trying to send keys to it. I tried modifying the code to setFocusable(false) when in the onKeyDown handler for the SurfaceView, but that doesn't seem to affect this. Any other ideas on what might be causing this? Or what these messages in Logcat even mean? ============================= 05-31 19:35:35.285: INFO/WindowManager(586): focus null mToken is null at event dispatch! 05-31 19:35:35.295: WARN/WindowManager(586): Current state: {{KeyEvent{action=1 code=4 repeat=0 meta=0 scancode=158 mFlags=8} to null @ 1275334535292 lw=null lb=null fin=true gfw=true ed=true tts=0 wf=false fp=false mcf=null}} 05-31 19:35:35.305: WARN/WindowManager(586): Continuing to wait for key to be dispatched 05-31 19:35:40.306: WARN/WindowManager(586): Key dispatching timed out sending to 05-31 19:35:40.316: WARN/WindowManager(586): Dispatch state: {{KeyEvent{action=0 code=4 repeat=0 meta=0 scancode=158 mFlags=8} to Window{43763540 com.myapp/com.myapp.DiagramEdit paused=false} @ 1275334499512 lw=Window{43763540 com.myapp/com.myapp.DiagramEdit paused=false} lb=android.os.BinderProxy@43702190 fin=false gfw=true ed=true tts=0 wf=false fp=false mcf=null}} 05-31 19:35:40.326: INFO/WindowManager(586): focus null mToken is null at event dispatch! 05-31 19:35:40.326: WARN/WindowManager(586): Current state: {{KeyEvent{action=1 code=4 repeat=0 meta=0 scancode=158 mFlags=8} to null @ 1275334540327 lw=null lb=null fin=true gfw=true ed=true tts=0 wf=false fp=false mcf=null}} 05-31 19:35:40.326: WARN/WindowManager(586): Continuing to wait for key to be dispatched

    Read the article

  • primefaces p:commandButton action not redirecting when in a p:dialog

    - by John
    I have a command button with an action that returns a new URL to redirect to. When this command button is not inside the p:dialog all works as I would expect, but when I put the command button in the dialog then the dialog just closes and leaves me on the same page. <h:form id="reviewForm"> <h:messages id="saveMsg" showDetail="true" globalOnly="true"/> <p:panel style="text-align: center"> <p:commandButton type="button" value="Submit" onclick="showOptions(); areYouSureVar.show();" /> </p:panel> <p:dialog id="areYouSure" widgetVar="areYouSureVar" resizable="false" width="400" modal="true" header="Are you sure you want to continue?"> <p:panel style="text-align: center"> <p:commandButton id="submit" ajax="false" value="Submit" action="#{mybean.myaction}" oncomplete="areYouSureVar.hide();"/> <p:commandButton type="button" value="Cancel" onclick="areYouSureVar.hide();"/> </p:panel> </p:dialog> </h:form> mybean.action returns a string that points to another page, but that page never loads, the dialog goes away and that is all.

    Read the article

  • log file is not getting created using JDK logging with Commons-logging

    - by Saida Dhanavath
    When I run the TestJcLLoggingService class log messages are coming to Console but no log file is created, please help me if you know the answer. two source files are pasted below. TestJcLLoggingService.java package com.amadeus.psp.pasd.logging; import org.apache.commons.logging.Log; import org.apache.commons.logging.LogFactory; import org.springframework.stereotype.Service; @Service public class TestJCLLoggingService { private static Log psp_log = LogFactory.getLog(TestJCLLoggingService.class); public static String testJCLLoggingServiceMethod(){ psp_log.info("start of method testJCLLoggingServiceMethod class TestJCLLoggingService"); psp_log.info("start of method testJCLLoggingServiceMethod class TestJCLLoggingService"); return "This is a test string for JCLLogging"; } public static void main(String[] args){ testJCLLoggingServiceMethod(); } } logging.properties handlers = java.util.logging.ConsoleHandler, java.util.logging.FileHandler .level = ALL com.amadeus.psp.pasd.level=ALL java.util.logging.ConsoleHandler.level = ALL java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter java.util.logging.FileHandler.pattern = %h/java%u.log java.util.logging.FileHandler.level=ALL java.util.logging.FileHandler.limit=50000 java.util.logging.FileHandler.count=1 java.util.logging.FileHandler.formatter=java.util.logging.SimpleFormatter java.util.logging.FileHandler.append=true Thanks in advance.

    Read the article

  • Cannot load rJava because cannot load a shared library

    - by Farrel
    I have been struggling to load the rJava package in R. I get the following messages > library(rJava) Error in inDL(x, as.logical(local), as.logical(now), ...) : unable to load shared library \ 'C:/PROGRA~1/R/R-210~1.1/library/rJava/libs/rJava.dll': LoadLibrary failure: The specified module could not be found. Error : .onLoad failed in 'loadNamespace' for 'rJava' Error: package/namespace load failed for 'rJava' I have tried so many solutions that they are all bamboozeled in my head. At some point I even got > R Console: Rgui.exe - System Error The > program can't start because > MSVCR71.dll is is missing from your > computer. Try reinstalling the program > to fix this problem. I made sure everything I could think of was on the path > C:\Program Files\R\Rtools\bin;C:\Program Files\R\Rtools\perl\bin; C:\Program Files\R\Rtools\MinGW\bin;%SystemRoot%\system32; %SystemRoot%;%SystemRoot%\System32\Wbem; %SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; C:\Program Files\QuickTime\QTSystem\; C:\Program Files\R\R-2.10.1\library\rJava\libs\; C:\Program Files\R;C:\Program Files\Java\jre6\bin\client What should I try next? I am running R version 2.10.1 (2009-12-14) and I have also tried R version 2.10.1 Patched (2010-03-03 r51210). It is on a Windows machine running windows 7 enterprise

    Read the article

  • -[UIImage drawInRect:] / CGContextDrawImage() not releasing memory?

    - by sohocoke
    I wanted to easily blend a UIImage on top of another background image, so wrote a category method for UIImage, adapted from http://stackoverflow.com/questions/1309757/blend-two-uiimages : - (UIImage *) blendedImageOn:(UIImage *) backgroundImage { NSAutoreleasePool* pool = [[NSAutoreleasePool alloc] init]; UIGraphicsBeginImageContext(backgroundImage.size); CGRect rect = CGRectMake(0, 0, backgroundImage.size.width, backgroundImage.size.height); [backgroundImage drawInRect:rect]; [self drawInRect:rect]; UIImage* blendedImage = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); [pool release]; return blendedImage; } Unfortunately my app that uses the above method to load around 20 images and blend them with background and gloss images (so probably around 40 calls), is being jettisoned on the device. An Instruments session revealed that calls to malloc stemming from the calls to drawInRect: are responsible for the bulk of the memory usage. I tried replacing the drawInRect: messages with equivalent function calls to the function CGContextDrawImage but it didn't help. The AutoReleasePool was added after I found the memory usage problem; it also didn't make a difference. I'm thinking this is probably because I'm not using graphics contexts appropriately. Would calling the above method in a loop be a bad idea because of the number of contexts I create? Or did I simply miss something?

    Read the article

  • Programming Java 7 in Eclipse

    - by reprogrammer
    I installed JDK 7 and Eclipse 3.6M6. Then, I added JRE 7 as a new JRE execution environment in Eclipse, and set the compiler compliance level to Java 7. I can compile the following piece of code through command line using the javac that comes with JDK 7. import java.util.HashMap; import java.util.Map; public class Try { public static void main(String[] args) { Map<Integer, String> map = new HashMap<>(); } } But, Eclipse gives the following error messages. Incorrect number of arguments for type HashMap; it cannot be parameterized with arguments Try.java /TryJava7/src line 7 Java Problem Syntax error on token "<", ? expected after this token Try.java /TryJava7/src line 7 Java Problem Even though I've set the compliance level of the compiler to Java 7, it looks like Eclipse doesn't understand Java7 syntax yet. Is it possible to play with Java 7 in Eclipse? The following is the content of .classpath. <?xml version="1.0" encoding="UTF-8"?> <classpath> <classpathentry kind="src" path="src"/> <classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER/org.eclipse.jdt.internal.debug.ui.launcher.StandardVMType/JavaSE-1.7"/> <classpathentry kind="output" path="bin"/> </classpath> And, the following is the content of .settings/org.eclipse.jdt.core.prefs. eclipse.preferences.version=1 org.eclipse.jdt.core.compiler.codegen.inlineJsrBytecode=enabled org.eclipse.jdt.core.compiler.codegen.targetPlatform=1.7 org.eclipse.jdt.core.compiler.codegen.unusedLocal=preserve org.eclipse.jdt.core.compiler.compliance=1.7 org.eclipse.jdt.core.compiler.debug.lineNumber=generate org.eclipse.jdt.core.compiler.debug.localVariable=generate org.eclipse.jdt.core.compiler.debug.sourceFile=generate org.eclipse.jdt.core.compiler.problem.assertIdentifier=error org.eclipse.jdt.core.compiler.problem.enumIdentifier=error org.eclipse.jdt.core.compiler.source=1.7

    Read the article

  • Localize WiX installer which uses the Firewall extension

    - by tronda
    I've got a WiX installer project which uses MSBuild to generate the MSI file. The WXS file includes the WiX firewall extension: xmlns:fire="http://schemas.microsoft.com/wix/FirewallExtension" I've defined two cultures in the MSBuild file with the following definition: <PropertyGroup> ... <Cultures>en-us;no-no</Cultures> </PropertyGroup> I've also added the translated resources: <ItemGroup> <EmbeddedResource Include="lang\Firewall_no-no.wxl" /> <EmbeddedResource Include="lang\WixUI_no-no.wxl" /> </ItemGroup> These represents translation to Norwegian for the Firewall extension and the WixUI extension. When I run the build it succeeds with the en-us part, but the no-no part fails with the following error messages: C:\delivery\Dev\wix30_public\src\ext\FirewallExtension\wixlib\FirewallExtension.wxs(19): error LGHT0102: The localization variable !(loc.WixSchedFirewallExceptionsInstall) is unknown. Please ensure the variable is defined. .... Couple of issues: I don't know where the C:\delivery directory comes from. I don't have such a directory. The localization variables referenced in the error message have been translated in the Firewall_no-no.wxl file. When I run MSBuild with more detailed information I see the following output right before the error message: Task "Light" Command: C:\Program Files (x86)\Windows Installer XML v3\bin\Light.exe -cultures:no-no -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixUIExtension.dll" -ext "C:\Program Files (x86)\Windows I nstaller XML v3\bin\WixUtilExtension.dll" -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixFirewallExtension.dll" -loc lang\Firewall_no-no.wxl -loc lang\WixUI_no-no.wxl -out F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.msi -pdbout F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.wixpdb obj\Debug\MyProj.wixobj As the details show, the MSBuild task results in having two -loc parameters to the Light executable. Not sure if that would be the reason for this problem. Any ideas on how to solve this?

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >