Search Results

Search found 5632 results on 226 pages for 'msdn geek'.

Page 214/226 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer

    - by Elton Stoneman
    This is the second in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Part 2 is nice and easy. From Part 1 we exposed our service over the Azure Service Bus Relay using the netTcpRelayBinding and verified we could set up our network to listen for relayed messages. Assuming we want to consume that service in .NET from an environment which is fairly unrestricted for us, but quite restricted for attackers, we can use netTcpRelay and shared secret authentication. Pattern applicability This is a good fit for scenarios where: the consumer can run .NET in full trust the environment does not restrict use of external DLLs the runtime environment is secure enough to keep shared secrets the service does not need to know who is consuming it the service does not need to know who the end-user is So for example, the consumer is an ASP.NET website sitting in a cloud VM or Azure worker role, where we can keep the shared secret in web.config and we don't need to flow any identity through to the on-premise service. The service doesn't care who the consumer or end-user is - say it's a reference data service that provides a list of vehicle manufacturers. Provided you can authenticate with ACS and have access to Service Bus endpoint, you can use the service and it doesn't care who you are. In this post, we’ll consume the service from Part 1 in ASP.NET using netTcpRelay. The code for Part 2 (+ Part 1) is on GitHub here: IPASBR Part 2 Authenticating and authorizing with ACS In this scenario the consumer is a server in a controlled environment, so we can use a shared secret to authenticate with ACS, assuming that there is governance around the environment and the codebase which will prevent the identity being compromised. From the provider's side, we will create a dedicated service identity for this consumer, so we can lock down their permissions. The provider controls the identity, so the consumer's rights can be revoked. We'll add a new service identity for the namespace in ACS , just as we did for the serviceProvider identity in Part 1. I've named the identity fullTrustConsumer. We then need to add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus (see Part 1 for a walkthrough creating Service Idenitities): Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: fullTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send This sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. Adding a Service Reference The Part 2 sample client code is ready to go, but if you want to replicate the steps, you’re going to add a WSDL reference, add a reference to Microsoft.ServiceBus and sort out the ServiceModel config. In Part 1 we exposed metadata for our service, so we can browse to the WSDL locally at: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc?wsdl If you add a Service Reference to that in a new project you'll get a confused config section with a customBinding, and a set of unrecognized policy assertions in the namespace http://schemas.microsoft.com/netservices/2009/05/servicebus/connect. If you NuGet the ASB package (“windowsazure.servicebus”) first and add the service reference - you'll get the same messy config. Either way, the WSDL should have downloaded and you should have the proxy code generated. You can delete the customBinding entries and copy your config from the service's web.config (this is already done in the sample project in Sixeyed.Ipasbr.NetTcpClient), specifying details for the client:     <client>       <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                 behaviorConfiguration="SharedSecret"                 binding="netTcpRelayBinding"                 contract="FormatService.IFormatService" />     </client>     <behaviors>       <endpointBehaviors>         <behavior name="SharedSecret">           <transportClientEndpointBehavior credentialType="SharedSecret">             <clientCredentials>               <sharedSecret issuerName="fullTrustConsumer"                             issuerSecret="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/>             </clientCredentials>           </transportClientEndpointBehavior>         </behavior>       </endpointBehaviors>     </behaviors>   The proxy is straight WCF territory, and the same client can run against Azure Service Bus through any relay binding, or directly to the local network service using any WCF binding - the contract is exactly the same. The code is simple, standard WCF stuff: using (var client = new FormatService.FormatServiceClient()) { outputString = client.ReverseString(inputString); } Running the sample First, update Solution Items\AzureConnectionDetails.xml with your service bus namespace, and your service identity credentials for the netTcpClient and the provider:   <!-- ACS credentials for the full trust consumer (Part2): -->   <netTcpClient identityName="fullTrustConsumer"                 symmetricKey="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/> Then rebuild the solution and verify the unit tests work. If they’re green, your service is listening through Azure. Check out the client by navigating to http://localhost:53835/Sixeyed.Ipasbr.NetTcpClient. Enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

    Read the article

  • Becoming A Great Developer

    - by Lee Brandt
    Image via Wikipedia I’ve been doing the whole programming thing for awhile and reading and watching some of the best in the business. I have come to notice that the really great developers do a few things that (I think) makes them great. Now don’t get me wrong, I am not saying that I am one of these few. I still struggle with doing some of the things that makes one great at development. Coincidently, many of these things also make you a better person period. Believe That Guidance Is Better Than Answers This is one I have no problem with. I prefer guidance any time I am learning from another developer. Answers may get you going, but guidance will leave you stranded. At some point, you will come across a problem that can only be solved by thinking for yourself and this is where that guidance will really come in handy. You can use that guidance and extrapolate whatever technology to salve that problem (if it’s the right tool for solving that problem). The problem is, lots of developers simply want someone to tell them, “Do this, then this, then set that, and write this.” Favor thinking and learn the guidance of doing X and don’t ask someone to show you how to do X, if that makes sense. Read, Read and Read If you don’t like reading, you’re probably NOT going to make it into the Great Developer group. Great developers read books, they read magazines and they read code. Open source playgrounds like SourceForge, CodePlex and GitHub, have made it extremely easy to download code from developers you admire and see how they do stuff. Chances are, if you read their blog too, they’ll even explain WHY they did what they did (see “Guidance” above). MSDN and Code Magazine have not only code samples, but explanations of how to use certain technologies and sometimes even when NOT to use that same technology. Books are also out on just about every topic. I still favor the less technology centric books. For instance, I generally don’t buy books like, “Getting Started with Jiminy Jappets”. I look for titles like, “How To Write More Effective Code” (again, see guidance). The Addison-Wesley Signature Series is a great example of these types of books. They teach technology-agnostic concepts. Head First Design Patterns is another great guidance book. It teaches the "Gang Of Four" Design Patterns in a very easy-to-understand, picture-heavy way (I LIKE pictures). Hang Your Balls Out There Even though the advice came from a 3rd-shift Kinko’s attendant, doesn’t mean it’s not sound advice. Write some code and put it out for others to read, criticize and castigate you for. Understand that there are some real jerks out there who are absolute geniuses. Don’t be afraid to get some great advice wrapped in some really nasty language. Try to take what’s good about it and leave what’s not. I have a tough time with this myself. I don’t really have any code out there that is available for review (other than my demo code). It takes some guts to do, but in the end, there is no substitute for getting a community of developers to critique your code and give you ways to improve. Get Involved Speaking of community, the local and online user groups and discussion forums are a great place to hear about technologies and techniques you might never come across otherwise. Mostly because you might not know to look. But, once you sit down with a bunch of other developers and start discussing what you’re interested in, you may open up a whole new perspective on it. Don’t just go to the UG meetings and watch the presentations either, get out there and talk, socialize. I realize geeks weren’t meant to necessarily be social creatures, but if you’re amongst other geeks, it’s much easier. I’ve learned more in the last 3-4 years that I have been involved in the community that I did in my previous 8 years of coding without it. Socializing works, even if socialism doesn’t. Continuous Improvement Lean proponents might call this “Kaizen”, but I call it progress. We all know, especially in the technology realm, if you’re not moving ahead, you’re falling behind. It may seem like drinking from a fire hose, but step back and pick out the technologies that speak to you. The ones that may you’re little heart go pitter-patter. Concentrate on those. If you’re still overloaded, pick the best of the best. Just know that if you’re not looking at the code you wrote last week or at least last year with some embarrassment, you’re probably stagnating. That’s about all I can say about that, cause I am all out of clichés to throw at it. :0) Write Code Great painters paint, great writers write, and great developers write code. The most sure-fire way to improve your coding ability is to continue writing code. Don’t just write code that your work throws on you, pick that technology you love or are curious to know more about and walk through some blog demo examples. Take the language you use everyday and try to get it to do something crazy. Who knows, you might create the next Google search algorithm! All in all, being a great developer is about finding yourself in all this code. If it is just a job to you, you will probably never be one of the “Great Developers”, but you’re probably okay with that. If, on the other hand, you do aspire to greatness, get out there and GET it. No one’s going hand it to you.

    Read the article

  • Lessons learned from Word 2007 automation with c# 2008

    - by robertphyatt
    My organization has an ongoing project to take documents produced for internal regulations and such, change some of the formatting and then export it as PDF. Our requirements were that only one person would be doing this, but it has been painfully tedious and sometimes error-prone to do by hand. Enter the fearless developer to automate the situation! Since I am one of those guys that just plain does not like VB, I wanted to do the automation in the ever-so-much-more-familiar C#. While Microsoft had made a dll that makes such a task easier, documentation on MSDN is pretty lame and most of the forumns and posts on the internet had little to do with my task. So, I feel like I can give back to the community and make a post here of the things I have learned so far. I hope this is helpful to whoever stumbles upon it. Steps to do this: 1) First of all, make some sort of a project and use some sort of a means to get the filename of the word document you are trying to open. I got the filename the user wanted with an openFileDialog tied to a button that I labeled 'Browse':        private void btnBrowse_Click(object sender, EventArgs e)        {            try            {                DialogResult myResult = openFileDialog1.ShowDialog();                if (myResult.Equals(DialogResult.OK))                {                    if (openFileDialog1.SafeFileName.EndsWith(".doc"))                    {                        txtFileName.Text = openFileDialog1.SafeFileName;                        paramSourceDocPath = openFileDialog1.FileName;                        paramExportFilePath = openFileDialog1.FileName.Replace(".doc", ".pdf");                    }                    else                    {                        txtFileName.Text = "only something that end with .doc, please";                    }                }            }            catch (Exception err)            {                lblError.Text = err.Message;            }        }   2) Add in "using Microsoft.Office.Interop.Word;" after setting your project to reference Microsoft.Office.Core and Microsoft.Office.Interop.Word so that you don't have to add "Microsoft.Office.Interop.Word" to the front of everything. 3) Now you are ready to play. You will need to have a copy of word open and a copy of your word document that you want to modify open to be able to make the changes that are needed. The word interop dll likes using ref on all the parameters passed in, and likes to have them as objects. If you don't want to specify the parameter, you have to give it a "Type.Missing". I suggest creating some objects that you reuse all over the place to maintain sanity. object paramMissing = Type.Missing; ApplicationClass wordApplication = new ApplicationClass(); Document wordDocument = wordApplication.Documents.Open(                ref paramSourceDocPath, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing); 4) There are many ways to modify the text of the inside of the word document. One of the ways that was most effective for me was to break it down by paragraph and then do things on each paragraph by what style the particular paragraph had.            foreach (Paragraph thisParagraph in wordDocument.Content.Paragraphs)            {                string strStyleName = ((Style)thisParagraph.get_Style()).NameLocal;                string strText = thisParagraph.Range.Text;                //Do whatever you need to do            } 5) Sometimes you want to insert a new line character somewhere in the text or insert text into the document, etc.  There are a few ways you can do this: you can either modify the text of a paragraph by doing something like this ('\r' makes a new paragraph, '\v' will make a newline without making a new paragraph. If you remove a '\r' from the text, it will eliminate the paragraph you removed it from): thisParagraph.Range.Text = "A\vNew Paragraph!\r" + thisParagraph.Range.Text; OR you could select where you want to insert it and have it act like you were typing in Word like any normal user (note: if you do not collapse the range first, you will overwrite the thing you got the range from) object oCollapseDirectionEnd = WdCollapseDirection.wdCollapseEnd; object oCollapseDirectionStart = WdCollapseDirection.wdCollapseStart; Range rangeInsertAtBeginning = thisParagraph.Range; Range rangeInsertAtEnd = thisParagraph.Range; rangeInsertAtBeginning.Collapse(ref oCollapseDirectionStart); rangeInsertAtEnd.Collapse(ref oCollapseDirectionEnd); rangeInsertAtBeginning.Select(); wordApplication.Selection.TypeText("Blah Blah Blah"); rangeInsertAtEnd.Select(); wordApplication.Selection.TypeParagraph(); 6) If you want to make text columns, like a newspaper or newsletter, you have to modify the page layout of the document or a section of the document to make it happen. In my case, I only wanted a particular section to have that, and I wanted to have a black line before and after the newspaper-like text columns. First you need to do a section break on either side of what you wanted, then you take the section and modify the page layout. Then you can modify the borders of the section (or another object in the word document). I also show here how to modify the alignment of a paragraph.            object oSectionBreak = WdBreakType.wdSectionBreakContinuous;            //These ranges were set while I was going through the paragraphs of my document, like I was showing earlier            rangeHeaderStart.InsertBreak(ref oSectionBreak);            rangeHeaderEnd.InsertBreak(ref oSectionBreak);            //change the alignment to justify            object oRangeHeaderStart = rangeStartJustifiedAlignment.Start;            object oRangeHeaderEnd = rangeHeaderEnd.End;            Range rangeHeader = wordDocument.Range(ref oRangeHeaderStart, ref oRangeHeaderEnd);            rangeHeader.Paragraphs.Alignment = WdParagraphAlignment.wdAlignParagraphJustify;            //find the section break and make it into triple text columns            foreach (Section mySection in wordDocument.Sections)            {                if (mySection.Range.Start == rangeHeaderStart.Start)                {                    mySection.PageSetup.TextColumns.Add(ref paramMissing, ref paramMissing, ref paramMissing);                    mySection.PageSetup.TextColumns.Add(ref paramMissing, ref paramMissing, ref paramMissing);                    //I didn't like the default spacing and column widths. This is how I adjusted them.                    foreach (TextColumn txtc in mySection.PageSetup.TextColumns)                    {                        try                        {                            txtc.SpaceAfter = 151.6f;                            txtc.Width = 7;                        }                        catch (Exception)                        {                            txtc.Width = 151.6f;                        }                    }                }            } That is all  I have time for today! I hope this was helpful to someone!

    Read the article

  • Adding a DLL to the GAC in Windows 7

    - by Jim Giercyk
    I recently created a DLL and I wanted to reference it from a project I was developing in Visual Studio.  In previous versions of Windows, doing so was simply a matter of dropping the DLL file in the C:\Windows\assembly folder.  That would add the DLL to the Global Assembly Cache (GAC) and make it accessible in Visual Studio.  However, as is often the case, Window 7 is different.  Even if you have Administrator privileges on your machine, you still do not have permission to drop a file in the assembly folder.  Undaunted, I thought about using the old DOS command line utility gacutil.exe.  Microsoft developed the tool as part of the .Net framework, and it is available in the Windows SDK Framework Tools.  If you have never used gacutil.exe before, you can find out everything you ever wanted to know but were afraid to ask here: http://msdn.microsoft.com/en-us/library/ex0ss12c(v=vs.80).aspx .  Unfortunately, if you do not have the Windows SDK loaded on your development machine, you will need to install it to use gacutil, but it is relatively quick and painless, and the framework tools are very useful.  Look here for your latest SDK: http://www.microsoft.com/download/en/search.aspx?q=Windows%20SDK .   After installing the SDK, I tried installing my DLL to the GAC by running gacutil from a DOS command line: That’s odd.  Microsoft is shipping a tool that cannot be executed even with Administrator rights?  Let me stop here and say that I am by no means a Windows security expert, so I actually did contact my system administrators, and they were not sure how to fix the problem….there must be a super administrator access level, but it isn’t available to your average developer in my company.  The solution outlined here is working within the boundaries of a normal windows Administrator. So, now the hacker in me bubbles to the surface.  What if I were to create a simple BAT file containing the gacutil command?  It’s so crazy it just might work!  Ugh!  I was starting to think this would never work, but then I realized that simply executing a batch program did not change my level of access.  Typically in Windows 7, you would select the “Run As Administrator” option to temporarily act as an administrator for the purpose of executing a process.  However, that option is not available for BAT files run from the command line.  SOLUTION: Create a desktop shortcut to execute the BAT file, which in turn will execute the line command…..are you still with me?  I created a shortcut and pointed it to my batch file.  Theoretically, all I need to do now is right-click on the shortcut and select “Run As Administrator” and we’re good, right?  Well, kinda.  If you notice the syntax of my BAT file, the name of the DLL is passed in as a parameter.  Therefore, I either have to hard-code the file name in the BAT program (YUCK!!), or I can leave the parameter and drag the DLL file to the shortcut and drop it.  Sweet, drag-and-drop works for me…..but if I use the drag-and-drop method, there is no way for me to right-click and select “Run As Administrator”.  That is not a problem…..I simply have to adjust the properties of the shortcut I created and I am in business.  I Right-clicked on the shortcut and select “Properties”.  Under the “Shortcut” tab there is an “Advanced” button…..I clicked it. All I needed to do was check the “Run As Administrator” box: In summary, what I have done is create a BAT file to execute a command line utility, gacutil.exe.  Then, rather than executing the BAT file from the command line, I created a desktop shortcut to run it and set the shortcut properties to “Run As Administrator”.  This will effectively mean I am executing the command line utility with Administrator privileges.  Pretty sneaky. Now, when I drag the DLL file  over to the shortcut, it starts the BAT file and adds the DLL to the assembly cache.  I created another BAT file to remove a DLL from the GAC in case the need should arise.  The code for that is: Give it a try.  I can’t imagine why updating the GAC has been made into such a chore in Windows 7.  Hopefully there is a service pack in the works that will give developers the functionality they had in Windows XP, but in the meantime, this workaround is extremely useful.

    Read the article

  • CodePlex Daily Summary for Sunday, June 12, 2011

    CodePlex Daily Summary for Sunday, June 12, 2011Popular ReleasesSizeOnDisk: 1.0.8.4: Fix: Contextual menu failures. Switch to ShellExecuteEx of Win32Api.Phalanger - The PHP Language Compiler for the .NET Framework: 2.1 (June 2011) for .NET 4.0: Release of Phalanger 2.1 - the opensource PHP compiler for .NET framework 4.0. Installation package also includes basic version of Phalanger Tools for Visual Studio 2010. This allows you to easily create, build and debug Phalanger web or application inside this ultimate integrated development environment. You can even install the tools into the free Visual Studio 2010 Shell (Integrated). To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phala...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.7: Version: 2.0.0.7 (Milestone 7): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...SimplePlanner: v2.0b: For 2011-2012 Sem 1 ???2011-2012 ????Visual Studio 2010 Help Downloader: 1.0.0.3: Domain name support for proxy Cleanup old packages bug Writing to EventLog with UAC enabled bug Small fixes & RefactoringMedia Companion: MC 3.406b weekly: With this version change a movie rebuild is required when first run -else MC will lock up on exit. Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you find MC not displaying movie data properly, please try a 'movie rebuild' to reload the data from the nfo's into MC's cache. Fixes Movies Readded movie preference to rename invalid or scene nfo's to info ext...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionNetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9: Changes: - fix examples (include issue 16026) - add new examples - 32Bit/64Bit Walkthrough is now available in technical Documentation. Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...Reusable Library: V1.1.3: A collection of reusable abstractions for enterprise application developerClosedXML - The easy way to OpenXML: ClosedXML 0.54.0: New on this release: 1) Mayor performance improvements. 2) AdjustToContents now take into account the text rotation. 3) Fixed issues 6782, 6784, 6788HTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixes AutoLoL v2 is not an update, but an entirely new version! Please install to a different directory than AutoLoL v1Host Profiles: Host Profiles 1.0: Host Profiles 1.0 Release Quickly modify host file Automatically flush dnsVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.0.3: Fixed User Management screen when "RequiresQuestionAndAnswer" set to true Reply to Email Address can now be customized User Management page now only displays users that reside in the membership database Web parts have been changed to inherit from System.Web.UI.WebControls.WebParts.WebPart, so that they will display on anonymous application pages For installation and configuration steps see here.Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...New ProjectsAnything Over Anything (Network Tunneling): Tunneling software created using the Reactive Extensions framework! Rx is not just for events!!!BDDocs - Behavior Driven Documentation: An alternative tool to enable project collaboration between stakeholders in a BDD environment. Focuses more on the domain and its implementation then the technical details of the testing framework.Checkin Policies for TFS 2010: More check-in policies for TFS 2010cheese: Projet d'études sur les jeux d'échecs http://davcha.wordpress.comCodeCrusade: Code Crusade is a programming game based around Lua and C#.Dimensional Values: Dimensional Values is a class library that defines units like inch, foot, meter, second, minute, hour, Newton, Pascal, Hertz, etc. that qualify values stored in classes of different dimensions such as the length dimension, the time dimension, the force dimension, etc. The library takes care of unit conversion automatically and produces higher dimension class objects from the mathematical operators (for example, dividing a length dimensional value by a time dimensional value automatically y...Enlight Adventures: Enlight Adventures is a Windows Phone 7 game that is based on the activities of the Enlight Fountain Control Group at the University of Wisconsin - Madison.Expression Tree Serializer: .NET 4.0 and Silverlight 4 class library that serializes and deserializes Expression instances. Also: a WCF IQueryable LINQ Provider and Web Http (REST) client for Silverlight that provides a simplified REST client API (i.e. WCF's WebChannelFactory) that's easier to use than WebClient.F# and C# ASP.NET MVC 3 (Razor) VSIX Project Template Example: This project provides an example of how to create a F# and C# VSIX Project Template made up of a C# ASP.NET MVC 3 web application, a F# Library that contains controllers, models, etc., and a F# Library that can be used to contain unit tests. FreeForm - SilverLight Dynamic Form Builder: FreeForm is a SilverLight4 Dynamic Forms Designer. It is enterprise forms for gathering information and making tools, include a lot of Silverlight4 interface control. Now Give Up InfoPath! TO Use FreeForm! First version online DEMO: http://crmwin.com/TestPage.html?Type=tempInternational Geek Developer Alliance: Take it easy!Kouak - HTTP File Share Server: Kouak is a basic portable file share server over http. He let you share easily files in eterogenous environements and in just few click. He don't need installation and run on every machine from windows xp s2 to windows 7.MARK: MARK is an interpreted programming language, written in PHP, for beginners to learn the fundamentals of programming paradigms. To make learning easier this language cuts the syntactic learning curve out that can hinder learning - hence allowing any beginner to learn the fundamentals of programming easily, whilst having fun with an easy-to-write, powerful programming language.Movie Manager: A tool for personal Movie CollectionNairc: This is a telescope control system project of Nairc.NPD: NPD Trading SystemObjects Library: OLib is a list of objects for programming, Programmers don't have to make alot of own classes anymoreProgressbar Field: The progress bar is typically used when an application performs tasks such as project progress or sales activity. Users of an application might consider an application non-informative if there is no visual cue.PTask: PTask is an API built on the .NET Task API that simplifies the execution in parrallel of dependent units of work. It provides a fluent API for building node dependency structures and executes those structures with the maximum level of parralelization using the thread pool.Quant: quantSharpAuctioneer: A set of classes to parse and read the World of Warcraft Auctioneer Add-On scan data.SimplePlanner: NTU Simple PlannerSiteUnity Framework: SiteUnity Framework makes it easier to build website. The target of framework, write less and simple code to build complex website. For that purpose there are some modules for viewing and managing page. It's develop in Asp.NET using C#, Mssql and Jquery.SMTP Proxy for GMail and Windows Live Mail/Hotmail: GMail and Microsoft Live Mail require encrypted connections (SSL/TLS), but not all software supports SSL/TLS. SmtpProxy accepts unencrypted connections and forwards them to GMail/Live. It runs as a Windows Service and supports ALL email clients. It's developed in C#/.NET4.WipeTouch, a jQuery plugin for touch devices: jQuery plugin for touch wipe events. Detects when user wipes on all 9 directions (top, bottom, left, right and diagonals) and triggers the desired event.

    Read the article

  • A little primer on using TFS with a small team

    - by johndoucette
    The scenario; A small team of 3 developers mostly in maintenance mode with traditional ASP.net, classic ASP, .Net integration services and utilities with the company’s third party packages, and a bunch of java-based Coldfusion web applications all under Visual Source Safe (VSS). They are about to embark on a huge SharePoint 2010 new construction project and wanted to use subversion instead VSS. TFS was a foreign word and smelled of “high cost” and of an “over complicated process”. Since they had no preconditions about the old TFS versions (‘05 & ‘08), it was fun explaining how simple it was to install a TFS server and get the ball rolling, with or without all the heavy stuff one sometimes associates with such a huge and powerful application management lifecycle product. So, how does a small team begin using TFS? 1. Start by using source control and migrate current VSS source trees into TFS. You can take the latest version or migrate the entire version history. It’s up to you on whether you want a clean start or need quick access to all the version notes and history of the bits. 2. Since most shops are mainly in maintenance mode with existing applications, begin using bug workitems for everything. When you receive an issue/bug from your current tracking system, manually enter the workitem in TFS right through Visual Studio. You can automate the integration to the current tracking system later or replace it entirely. Believe me, this thing is powerful and can handle even the largest of help desks. 3. With new construction, begin work with requirements and task workitems and follow the traditional sprint-based development lifecycle. Obviously, some minor training will be needed, but don’t fear, this is very intuitive and MSDN has a ton of lesson based labs and videos. 4. For the java developers, use the new Team Explorer Everywhere 2010 plugin (recently known as Teamprise). There is a seamless interface in Eclipse, but also a good command-line utility for other environments such as Dreamweaver. 5. Wait to fully integrate the whole workitem/project management/testing process until your team is familiar with the integrated workitems for bugs and code. After a while, you will see the team wanting more transparency into the work they are all doing and naturally, everyone will want workitems to help them organize the chaos! 6. Management will be limited in the value of the reports until you have a fully blown implementation of project planning, construction, build, deployment and testing. However, there are some basic “bug rate” reports and current backlog listings that can provide good information. Some notable explanations of TFS; Work Item Tracking and Project Management - A workitem represents the unit of work within the system which enables tracking of all activities produced by a user, whether it is a developer, business user, project manager or tester. The properties of a workitem such as linked changesets (checked-in code), who updated the data and when, the states and reasons for change, are all transitioned to a data warehouse within TFS for reporting purposes. A workitem can be defines as a "bug", "requirement", test case", or a "change request". They drive the work effort by the individual assigned to it and also provide a key role in defining what needs to be done. Workitems are the things the team needs to do to accomplish a goal. Test Case Management - Starting with a workitem known as a "test case", a tester (or developer) can now author and manage test cases within a formal test plan subsystem. Although TFS supports the test case workitem type, there is a new product known as the VS Test Professional 2010 which allows a tester to facilitate manual tests including fast forwarding steps in the process to arrive at the assertion point quickly. This repeatable process provides quick regression tests and can be conducted by the business user to ensure completeness during UAT. In addition, developers no longer can provide a response to a bug with the line "cannot reproduce". With every test run, attachments including the recorded session, captured environment configurations and settings, screen shots, intellitrace (debugging history), and in some cases if the lab manager is being used, a snapshot of the tested environment is available. Version Control - A modern system allowing shared check-in/check-out, excellent merge conflict resolution, Shelvesets (personal check-ins), branching/merging visualization, public workspaces, gated check-ins, security hierarchy capabilities, and changeset/workitem tracking. Knowing what was done with the code by any developer has become much easier to picture and resolve issues. Team Build - Automate the compilation process whether you need it to be whenever a developer checks-in code, periodically such as nightly builds for testers in the morning, or manual builds to be deployed into production. Each build can run through pre-determined tests, perform code analysis to see if the developer conforms to the team standards, and reject the build if either fails. Project Portal & Reporting - Provide management with a dashboard with insight into the project(s). "Where are we" in each step of the way including past iterations and the current burndown rate. Enabling this feature is easy as it seamlessly interfaces with existing SharePoint implementations.

    Read the article

  • Auto-Configuring SSIS Packages

    - by Davide Mauri
    SSIS Package Configurations are very useful to make packages flexible so that you can change objects properties at run-time and thus make the package configurable without having to open and edit it. In a complex scenario where you have dozen of packages (even in in the smallest BI project I worked on I had 50 packages), each package may have its own configuration needs. This means that each time you have to run the package you have to pass the correct Package Configuration. I usually use XML configuration files and I also force everyone that works with me to make sure that an object that is used in several packages has the same name in all package where it is used, in order to simplify configurations usage. Connection Managers are a good example of one of those objects. For example, all the packages that needs to access to the Data Warehouse database must have a Connection Manager named DWH. Basically we define a set of “global” objects so that we can have a configuration file for them, so that it can be used by all packages. If a package as some specific configuration needs, we create a specific – or “local” – XML configuration file or we set the value that needs to be configured at runtime using DTLoggedExec’s Package Parameters: http://dtloggedexec.davidemauri.it/Package%20Parameters.ashx Now, how we can improve this even more? I’d like to have a package that, when it’s run, automatically goes “somewhere” and search for global or local configuration, loads it and applies it to itself. That’s the basic idea of Auto-Configuring Packages. The “somewhere” is a SQL Server table, defined in this way In this table you’ll put the values that you want to be used at runtime by your package: The ConfigurationFilter column specify to which package that configuration line has to be applied. A package will use that line only if the value specified in the ConfigurationFilter column is equal to its name. In the above sample. only the package named “simple-package” will use the line number two. There is an exception here: the $$Global value indicate a configuration row that has to be applied to any package. With this simple behavior it’s possible to replicate the “global” and the “local” configuration approach I’ve described before. The ConfigurationValue contains the value you want to be applied at runtime and the PackagePath contains the object to which that value will be applied. The ConfiguredValueType column defined the data type of the value and the Checksum column is contains a calculated value that is simply the hash value of ConfigurationFilter plus PackagePath so that it can be used as a Primary Key to guarantee uniqueness of configuration rows. As you may have noticed the table is very similar to the table originally used by SSIS in order to put DTS Configuration into SQL Server tables: SQL Server SSIS Configuration Type: http://msdn.microsoft.com/en-us/library/ms141682.aspx Now, how it works? It’s very easy: you just have to call DTLoggedExec with the /AC option: DTLoggedExec.exe /FILE:”mypackage.dtsx” /AC:"localhost;ssis_auto_configuration;ssiscfg.configuration" the AC option expects a string with the following format: <database_server>;<database_name>;<table_name>; only Windows Authentication is supported. When DTLoggedExec finds an Auto-Configuration request, it injects a new connection manager in the loaded package. The injected connection manager is named $$DTLoggedExec_AutoConfigure and is used by the two SQL Server DTS Configuration ($$DTLoggedExec_Global and $$DTLoggedExec_Local) also injected by DTLoggedExec, used to load “local” and “global” configuration. Now, you may start to wonder why this approach cannot be used without having all this stuff going around, but just passing to a package always two XML DTS Configuration files, (to have to “local” and the “global” configurations) doing something like this: DTLoggedExec.exe /FILE:”mypackage.dtsx” /CONF:”global.dtsConfig” /CONF:”mypackage.dtsConfig” The problem is that this approach doesn’t work if you have, in one of the two configuration file, a value that has to be applied to an object that doesn’t exists in the loaded package. This situation will raise an error that will halt package execution. To solve this problem, you may want to create a configuration file for each package. Unfortunately this will make deployment and management harder, since you’ll have to deal with a great number of configuration files. The Auto-Configuration approach solve all these problems at once! We’re using it in a project where we have hundreds of packages and I can tell you that deployment of packages and their configuration for the pre-production and production environment has never been so easy! To use the Auto-Configuration option you have to download the latest DTLoggedExec release: http://dtloggedexec.codeplex.com/releases/view/62218 Feedback, as usual, are very welcome!

    Read the article

  • A tale of two dev accounts

    - by TechTwaddle
    Note: I am currently in the process of relocating my blog from http://www.geekswithblogs.net/techtwaddle to my new address at http://www.techtwaddle.net I suggest you point your feed readers to the new address as I slowly transition to my new shared-hosted, ad-free wordpress blog :)   You probably remember my rant from a while back about my windows mobile developer account having problems with the new AppHub, well, there have been few developments and I thought I should share it with you. First up, the issue isn’t fixed yet. I still cannot login to AppHub using my windows mobile 6.x developer account and can’t view details of my Minesweeper app. Who knows how many copies its sold. I had numerous exchanges with Microsoft’s support team on the AppHub forums and via email as well (support ticket), but somehow we never managed to get to the root of it. In fact, the support team itself grew so tired of the problem that they suggested I create a new dev account. I grew impatient, and it was really frustrating to have an app ready for submission but not being able to do anything with it. Eventually, the frustration had to show somewhere, and it was on this forum thread Prabhu Kumar in reply to Nick Nick, I feel for you and totally understand the frustration. Since day one I have been getting the XBOX profile linking error, We encountered an issue connecting your App Hub account with your Xbox Live Profile. Please visit Xbox.com and update your contact information. After you have updated your contact information, please return to the App Hub (https://users.create.msdn.com/Register) to continue. I have an app published on the Windows Mobile 6.x marketplace since Aug, now I can't view the details of this app. I completed work on my WP7 application 1.5 months ago and the first version is ready for submission to marketplace, only if I can login. You can imagine how frustrating all this can be, the issue has taken far too long to be fixed, this has drained all my motivation. I have exchanged numerous mails with Microsoft support team on this issue, and from the looks of it they really are trying their best, unfortunately, their best is not good enough for some of us. During the first week of December I was told that there would be an update happening to AppHub around mid of December. I was hoping that the issue would be fixed but it wasn't. After the update the only change I notice is that the xbox.com link on the error page now takes me to the correct link. Previously, this link used to take me to the 404 page you mentioned above. Out of desperation, I am now considering creating another developer account on AppHub with a new live id, even this I am not 100% sure will work. I asked the support team when the next update to AppHub was planned and got this reply, "We do not have  release date to announce for the next App Hub update at this time. In regards to the login issue you are experiencing at this point the only solution would be to create a new account with a different live ID but make sure to go to xbox.com before hand to get all the information in order on that side." I know it's an extra $99, and not that I can't afford it but it doesn't feel right and I shouldn't have to be doing it in the first place. I have lost all hope of this issue being resolved. I went ahead and created a new dev account, the id verification was in progress when Shaun Taulbee of Microsoft, who has been really helpful in the forums, replied saying, If you find it necessary to pay again to create a new account due to a Microsoft problem, send in a support request asking for a refund and we'll review it (and likely approve it given the circumstances). The thought of refund made me happy, but I had my doubts. So once my second account was verified by Geotrust I applied for a refund through the developer dashboard, by creating a support ticket. Couple of days later I got an email from Microsoft saying that the refund had been approved! yay! Few days and the refund showed up on my bill, Well, thank you Microsoft, it means a lot. I am glad it’s over now. The new account works flawlessly. I would still like to get my first account working again and look at my app numbers for Win Mo 6.x, and probably transfer the credits to the new account somehow, but I’ll save it for another day. If you’ve had similar problems with the AppHub, and had to create a new account to submit your app, I suggest you contact the support team and get your dollars refunded!

    Read the article

  • Configuring Application/User Settings in WPF the easy way.

    - by mbcrump
    In this tutorial, we are going to configure the application/user settings in a WPF application the easy way. Most example that I’ve seen on the net involve the ConfigurationManager class and involve creating your own XML file from scratch. I am going to show you a easier way to do it. (in my humble opinion) First, the definitions: User Setting – is designed to be something specific to the user. For example, one user may have a requirement to see certain stocks, news articles or local weather. This can be set at run-time. Application Setting – is designed to store information such as a database connection string. These settings are read-only at run-time. 1) Lets create a new WPF Project and play with a few settings. Once you are inside VS, then paste the following code snippet inside the <Grid> tags. <Grid> <TextBox Height="23" HorizontalAlignment="Left" Margin="12,11,0,0" Name="textBox1" VerticalAlignment="Top" Width="285" Grid.ColumnSpan="2" /> <Button Content="Set Title" Name="button2" Click="button2_Click" Margin="108,40,96,114" /> <TextBlock Height="23" Name="textBlock1" Text="TextBlock" VerticalAlignment="Bottom" Width="377" /> </Grid> Basically, its just a Textbox, Button and TextBlock. The main Window should look like the following:   2) Now we are going to setup our Configuration Settings. Look in the Solution Explorer and double click on the Settings.settings file. Make sure that your settings file looks just like mine included below:   What just happened was the designer created an XML file and created the Settings.Designer.cs file which looks like this: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.1 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace WPFExam.Properties { [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")] internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase { private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings()))); public static Settings Default { get { return defaultInstance; } } [global::System.Configuration.UserScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("ApplicationName")] public string ApplicationName { get { return ((string)(this["ApplicationName"])); } set { this["ApplicationName"] = value; } } [global::System.Configuration.ApplicationScopedSettingAttribute()] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Configuration.DefaultSettingValueAttribute("SQL_SRV342")] public string DatabaseServerName { get { return ((string)(this["DatabaseServerName"])); } } } } The XML File is named app.config and looks like this: <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" /> </sectionGroup> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="WPFExam.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <userSettings> <WPFExam.Properties.Settings> <setting name="ApplicationName" serializeAs="String"> <value>ApplicationName</value> </setting> </WPFExam.Properties.Settings> </userSettings> <applicationSettings> <WPFExam.Properties.Settings> <setting name="DatabaseServerName" serializeAs="String"> <value>SQL_SRV342</value> </setting> </WPFExam.Properties.Settings> </applicationSettings> </configuration> 3) The only left now is the code behind the button. Double click the button and replace the MainWindow() method with the following code snippet. public MainWindow() { InitializeComponent(); this.Title = Properties.Settings.Default.ApplicationName; textBox1.Text = Properties.Settings.Default.ApplicationName; textBlock1.Text = Properties.Settings.Default.DatabaseServerName; } private void button2_Click(object sender, RoutedEventArgs e) { Properties.Settings.Default.ApplicationName = textBox1.Text.ToString(); Properties.Settings.Default.Save(); } Run the application and type something in the textbox and hit the Set Title button. Now, restart the application and you should see the text that you entered earlier.   If you look at the button2 click event, you will see that it was actually 2 lines of codes to save to the configuration file. I hope this helps, for more information consult MSDN.

    Read the article

  • .NET Security Part 4

    - by Simon Cooper
    Finally, in this series, I am going to cover some of the security issues that can trip you up when using sandboxed appdomains. DISCLAIMER: I am not a security expert, and this is by no means an exhaustive list. If you actually are writing security-critical code, then get a proper security audit of your code by a professional. The examples below are just illustrations of the sort of things that can go wrong. 1. AppDomainSetup.ApplicationBase The most obvious one is the issue covered in the MSDN documentation on creating a sandbox, in step 3 – the sandboxed appdomain has the same ApplicationBase as the controlling appdomain. So let’s explore what happens when they are the same, and an exception is thrown. In the sandboxed assembly, Sandboxed.dll (IPlugin is an interface in a partially-trusted assembly, with a single MethodToDoThings on it): public class UntrustedPlugin : MarshalByRefObject, IPlugin { // implements IPlugin.MethodToDoThings() public void MethodToDoThings() { throw new EvilException(); } } [Serializable] internal class EvilException : Exception { public override string ToString() { // show we have read access to C:\Windows // read the first 5 directories Console.WriteLine("Pwned! Mwuahahah!"); foreach (var d in Directory.EnumerateDirectories(@"C:\Windows").Take(5)) { Console.WriteLine(d.FullName); } return base.ToString(); } } And in the controlling assembly: // what can possibly go wrong? AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = AppDomain.CurrentDomain.SetupInformation.ApplicationBase } // only grant permissions to execute // and to read the application base, nothing else PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, appDomainSetup.ApplicationBase); restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.pathDiscovery, appDomainSetup.ApplicationBase); // create the sandbox AppDomain sandbox = AppDomain.CreateDomain("Sandbox", null, appDomainSetup, restrictedPerms); // execute UntrustedPlugin in the sandbox // don't crash the application if the sandbox throws an exception IPlugin o = (IPlugin)sandbox.CreateInstanceFromAndUnwrap("Sandboxed.dll", "UntrustedPlugin"); try { o.MethodToDoThings() } catch (Exception e) { Console.WriteLine(e.ToString()); } And the result? Oops. We’ve allowed a class that should be sandboxed to execute code with fully-trusted permissions! How did this happen? Well, the key is the exact meaning of the ApplicationBase property: The application base directory is where the assembly manager begins probing for assemblies. When EvilException is thrown, it propagates from the sandboxed appdomain into the controlling assembly’s appdomain (as it’s marked as Serializable). When the exception is deserialized, the CLR finds and loads the sandboxed dll into the fully-trusted appdomain. Since the controlling appdomain’s ApplicationBase directory contains the sandboxed assembly, the CLR finds and loads the assembly into a full-trust appdomain, and the evil code is executed. So the problem isn’t exactly that the sandboxed appdomain’s ApplicationBase is the same as the controlling appdomain’s, it’s that the sandboxed dll was in such a place that the controlling appdomain could find it as part of the standard assembly resolution mechanism. The sandbox then forced the assembly to load in the controlling appdomain by throwing a serializable exception that propagated outside the sandbox. The easiest fix for this is to keep the sandbox ApplicationBase well away from the ApplicationBase of the controlling appdomain, and don’t allow the sandbox permissions to access the controlling appdomain’s ApplicationBase directory. If you do this, then the sandboxed assembly can’t be accidentally loaded into the fully-trusted appdomain, and the code can’t be executed. If the plugin does try to induce the controlling appdomain to load an assembly it shouldn’t, a SerializationException will be thrown when it tries to load the assembly to deserialize the exception, and no damage will be done. 2. Loading the sandboxed dll into the application appdomain As an extension of the previous point, you shouldn’t directly reference types or methods in the sandboxed dll from your application code. That loads the assembly into the fully-trusted appdomain, and from there code in the assembly could be executed. Instead, pull out methods you want the sandboxed dll to have into an interface or class in a partially-trusted assembly you control, and execute methods via that instead (similar to the example above with the IPlugin interface). If you need to have a look at the assembly before executing it in the sandbox, either examine the assembly using reflection from within the sandbox, or load the assembly into the Reflection-only context in the application’s appdomain. The code in assemblies in the reflection-only context can’t be executed, it can only be reflected upon, thus protecting your appdomain from malicious code. 3. Incorrectly asserting permissions You should only assert permissions when you are absolutely sure they’re safe. For example, this method allows a caller read-access to any file they call this method with, including your documents, any network shares, the C:\Windows directory, etc: [SecuritySafeCritical] public static string GetFileText(string filePath) { new FileIOPermission(FileIOPermissionAccess.Read, filePath).Assert(); return File.ReadAllText(filePath); } Be careful when asserting permissions, and ensure you’re not providing a loophole sandboxed dlls can use to gain access to things they shouldn’t be able to. Conclusion Hopefully, that’s given you an idea of some of the ways it’s possible to get past the .NET security system. As I said before, this post is not exhaustive, and you certainly shouldn’t base any security-critical applications on the contents of this blog post. What this series should help with is understanding the possibilities of the security system, and what all the security attributes and classes mean and what they are used for, if you were to use the security system in the future.

    Read the article

  • SQL ADO.NET shortcut extensions (old school!)

    - by Jeff
    As much as I love me some ORM's (I've used LINQ to SQL quite a bit, and for the MSDN/TechNet Profile and Forums we're using NHibernate more and more), there are times when it's appropriate, and in some ways more simple, to just throw up so old school ADO.NET connections, commands, readers and such. It still feels like a pain though to new up all the stuff, make sure it's closed, blah blah blah. It's pretty much the least favorite task of writing data access code. To minimize the pain, I have a set of extension methods that I like to use that drastically reduce the code you have to write. Here they are... public static void Using(this SqlConnection connection, Action<SqlConnection> action) {     connection.Open();     action(connection);     connection.Close(); } public static SqlCommand Command(this SqlConnection connection, string sql){    var command = new SqlCommand(sql, connection);    return command;}public static SqlCommand AddParameter(this SqlCommand command, string parameterName, object value){    command.Parameters.AddWithValue(parameterName, value);    return command;}public static object ExecuteAndReturnIdentity(this SqlCommand command){    if (command.Connection == null)        throw new Exception("SqlCommand has no connection.");    command.ExecuteNonQuery();    command.Parameters.Clear();    command.CommandText = "SELECT @@IDENTITY";    var result = command.ExecuteScalar();    return result;}public static SqlDataReader ReadOne(this SqlDataReader reader, Action<SqlDataReader> action){    if (reader.Read())        action(reader);    reader.Close();    return reader;}public static SqlDataReader ReadAll(this SqlDataReader reader, Action<SqlDataReader> action){    while (reader.Read())        action(reader);    reader.Close();    return reader;} It has been awhile since I've really revisited these, so you will likely find opportunity for further optimization. The bottom line here is that you can chain together a bunch of these methods to make a much more concise database call, in terms of the code on your screen, anyway. Here are some examples: public Dictionary<string, string> Get(){    var dictionary = new Dictionary<string, string>();    _sqlHelper.GetConnection().Using(connection =>        connection.Command("SELECT Setting, [Value] FROM Settings")            .ExecuteReader()            .ReadAll(r => dictionary.Add(r.GetString(0), r.GetString(1))));    return dictionary;} or... public void ChangeName(User user, string newName){    _sqlHelper.GetConnection().Using(connection =>         connection.Command("UPDATE Users SET Name = @Name WHERE UserID = @UserID")            .AddParameter("@Name", newName)            .AddParameter("@UserID", user.UserID)            .ExecuteNonQuery());} The _sqlHelper.GetConnection() is just some other code that gets a connection object for you. You might have an even cleaner way to take that step out entirely. This looks more fluent, and the real magic sauce for me is the reader bits where you can put any kind of arbitrary method in there to iterate over the results.

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • Using Resources the Right Way

    - by BuckWoody
    It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well –  that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think.   In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them.   Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address:  [email protected]   End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #004

    - by pinaldave
    Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • What to do after a servicing fails on TFS 2010

    - by Martin Hinshelwood
    What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

    Read the article

  • Myths about Coding Craftsmanship part 2

    - by tom
    Myth 3: The source of all bad code is inept developers and stupid people When you review code is this what you assume?  Shame on you.  You are probably making assumptions in your code if you are assuming so much already.  Bad code can be the result of any number of causes including but not limited to using dated techniques (like boxing when generics are available), not following standards (“look how he does the spacing between arguments!” or “did he really just name that variable ‘bln_Hello_Cats’?”), being redundant, using properties, methods, or objects in a novel way (like switching on button.Text between “Hello World” and “Hello World “ //clever use of space character… sigh), not following the SOLID principals, hacking around assumptions made in earlier iterations / hacking in features that should be worked into the overall design.  The first two issues, while annoying are pretty easy to spot and can be fixed so easily.  If your coding team is made up of experienced professionals who are passionate about staying current then these shouldn’t be happening.  If you work with a variety of skills, backgrounds, and experience then there will be some of this stuff going on.  If you have an opportunity to mentor such a developer who is receptive to constructive criticism don’t be a jerk; help them and the codebase will improve.  A little patience can improve the codebase, your work environment, and even your perspective. The novelty and redundancy I have encountered has often been the use of creativity when language knowledge was perceived as unavailable or too time consuming.  When developers learn on the job you get a lot of this.  Rather than going to MSDN developers will use what they know.  Depending on the constraints of their assignment hacking together what they know may seem quite practical.  This was not stupid though I often wonder how much time is actually “saved” by hacking.  These issues are often harder to untangle if we ever do.  They can also grow out of control as we write hack after hack to make it work and get back to some development that is satisfying. Hacking upon an existing hack is what I call “feeding the monster”.  Code monsters are anti-patterns and hacks gone wild.  The reason code monsters continue to get bigger is that they keep growing in scope, touching more and more of the application.  This is not the result of dumb developers. It is probably the result of avoiding design, not taking the time to understand the problems or anticipate or communicate the vision of the product.  If our developers don’t understand the purpose of a feature or product how do we expect potential customers to do so? Forethought and organization are often what is missing from bad code.  Developers who do not use the SOLID principals should be encouraged to learn these principals and be given guidance on how to apply them.  The time “saved” by giving hackers room to hack will be made up for and then some. Not as technical debt but as shoddy work that if not replaced will be struggled with again and again.  Bad code is not the result of dumb developers (usually) it is the result of trying to do too much without the proper resources and neglecting the right thing that needs doing with the first thoughtless thing that comes into our heads. Object oriented code is all about relationships between objects.  Coders who believe their coworkers are all fools tend to write objects that are difficult to work with, not eager to explain themselves, and perform erratically and irrationally.  If you constantly find you are surrounded by idiots you may want to ask yourself if you are being unreasonable, if you are being closed minded, of if you have chosen the right profession.  Opening your mind up to the idea that you probably work with rational, well-intentioned people will probably make you a better coder and it might even make you less grumpy.  If you are surrounded by jerks who do not engage in the exchange of ideas who do not care about their customers or the durability of the code you are building together then I suggest you find a new place to work.  Myth 4: Customers don’t care about “beautiful” code Craftsmanship is customer focused because it means that the job was done right, the product will withstand the abuse, modifications, and scrutiny of our customers.  Users can appreciate a predictable timeline for a release, a product delivered on time and on budget, a feature set that does not interfere with the task(s) it is supporting, quick turnarounds on exception messages, self healing issues, and less issues.  These are all hindered by skimping on craftsmanship.  When we write data access and when we write reusable code.   What do you think?  Does bad code come primarily from low IQ individuals?  Do customers care about beautiful code?

    Read the article

  • Loading XML file containing leading zeros with SSIS preserving the zeros

    - by Compudicted
    Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

    Read the article

  • Building a plug-in for Windows Live Writer

    - by mbcrump
    This tutorial will show you how to build a plug-in for Windows Live Writer. Windows Live Writer is a blogging tool that Microsoft provides for free. It includes an open API for .NET developers to create custom plug-ins. In this tutorial, I will show you how easy it is to build one. Open VS2008 or VS2010 and create a new project. Set the target framework to 2.0, Application Type to Class Library and give it a name. In this tutorial, we are going to create a plug-in that generates a twitter message with your blog post name and a TinyUrl link to the blog post.  It will do all of this automatically after you publish your post. Once, we have a new projected created. We need to setup the references. Add a reference to the WindowsLive.Writer.Api.dll located in the C:\Program Files (x86)\Windows Live\Writer\ folder, if you are using X64 version of Windows. You will also need to add a reference to System.Windows.Forms System.Web from the .NET tab as well. Once that is complete, add your “using” statements so that it looks like whats shown below: Live Writer Plug-In "Using" using System; using System.Collections.Generic; using System.Text; using WindowsLive.Writer.Api; using System.Web; Now, we are going to setup some build events to make it easier to test our custom class. Go into the Properties of your project and select Build Events, click edit the Post-build and copy/paste the following line: XCOPY /D /Y /R "$(TargetPath)" "C:\Program Files (x86)\Windows Live\Writer\Plugins\" Your screen should look like the one pictured below: Next, we are going to launch an external program on debug. Click the debug tab and enter C:\Program Files (x86)\Windows Live\Writer\WindowsLiveWriter.exe Your screen should look like the one pictured below:   Now we have a blank project and we need to add some code. We start with adding the attributes for the Live Writer Plugin. Before we get started creating the Attributes, we need to create a GUID. This GUID will uniquely identity our plug-in. So, to create a GUID follow the steps in VS2008/2010. Click Tools from the VS Menu ->Create GUID It will generate a GUID like the one listed below: GUID <Guid("56ED8A2C-F216-420D-91A1-F7541495DBDA")> We only want what’s inside the quotes, so your final product should be: "56ED8A2C-F216-420D-91A1-F7541495DBDA". Go ahead and paste this snipped into your class just above the public class. Live Writer Plug-In Attributes [WriterPlugin("56ED8A2C-F216-420D-91A1-F7541495DBDA",    "Generate Twitter Message",    Description = "After your new post has been published, this plug-in will attempt to generate a Twitter status messsage with the Title and TinyUrl link.",    HasEditableOptions = false,    Name = "Generate Twitter Message",    PublisherUrl = "http://michaelcrump.net")] [InsertableContentSource("Generate Twitter Message")] So far, it should look like the following: Next, we need to implement the PublishNotifcationHook class and override the OnPostPublish. I’m not going to dive into what the code is doing as you should be able to follow pretty easily. The code below is the entire code used in the project. PublishNotificationHook public class Class1 :  PublishNotificationHook  {      public override void OnPostPublish(System.Windows.Forms.IWin32Window dialogOwner, IProperties properties, IPublishingContext publishingContext, bool publish)      {          if (!publish) return;          if (string.IsNullOrEmpty(publishingContext.PostInfo.Permalink))          {              PluginDiagnostics.LogError("Live Tweet didn't execute, due to blank permalink");          }          else          {                var strBlogName = HttpUtility.UrlEncode("#blogged : " + publishingContext.PostInfo.Title);  //Blog Post Title              var strUrlFinal = getTinyUrl(publishingContext.PostInfo.Permalink); //Blog Permalink URL Converted to TinyURL              System.Diagnostics.Process.Start("http://twitter.com/home?status=" + strBlogName + strUrlFinal);            }      } We are going to go ahead and create a method to create the short url (tinyurl). TinyURL Helper Method private static string getTinyUrl(string url) {     var cmpUrl = System.Globalization.CultureInfo.InvariantCulture.CompareInfo;     if (!cmpUrl.IsPrefix(url, "http://tinyurl.com"))     {         var address = "http://tinyurl.com/api-create.php?url=" + url;         var client = new System.Net.WebClient();         return (client.DownloadString(address));     }     return (url); } Go ahead and build your project, it should have copied the .DLL into the Windows Live Writer Plugin Directory. If it did not, then you will want to check your configuration. Once that is complete, open Windows Live Writer and select Tools-> Options-> Plug-ins and enable your plug-in that you just created. Your screen should look like the one pictured below: Go ahead and click OK and publish your blog post. You should get a pop-up with the following: Hit OK and It should open a Twitter and either ask for a login or fill in your status as shown below:   That should do it, you can do so many other things with the API. I suggest that if you want to build something really useful consult the MSDN pages. This plug-in that I created was perfect for what I needed and I hope someone finds it useful.

    Read the article

  • Business Case for investing time developing Stubs and BizUnit Tests

    - by charlie.mott
    I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined.  But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose?  Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type.  Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance.  Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works.  Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged.  But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there?  What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

    Read the article

  • Rebuilding CoasterBuzz, Part II: Hot data objects

    - by Jeff
    This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

    Read the article

  • Key Windows Phone Development Concepts

    - by Tim Murphy
    As I am doing more development in and out of the enterprise arena for Windows Phone I decide I would study for the 70-599 test.  I generally take certification tests as a way to force me to dig deeper into a technology.  Between the development and studying I decided it would be good to put a post together of key development features in Windows Phone 7 environment.  Contrary to popular belief the launch of Windows Phone 8 will not obsolete Windows Phone 7 development.  With the launch of 7.8 coming shortly and people who will remain on 7.X for the foreseeable future there are still consumers needing these apps so don’t throw out the baby with the bath water. PhoneApplicationService This is a class that every Windows Phone developer needs to become familiar with.  When it comes to application state this is your go to repository.  It also contains events that help with management of your application’s lifecycle.  You can access it like the following code sample. 1: PhoneApplicationService.Current.State["ValidUser"] = userResult; DeviceNetworkInformation This class allows you to determine the connectivity of the device and be notified when something changes with that connectivity.  If you are making web service calls you will want to check here before firing off. I have found that this class doesn’t actually work very well for determining if you have internet access.  You are better of using the following code where IsConnectedToInternet is an App level property. private void Application_Launching(object sender, LaunchingEventArgs e){ // Validate user access if (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None) { IsConnectedToInternet = true; } else { IsConnectedToInternet = false; } NetworkChange.NetworkAddressChanged += new NetworkAddressChangedEventHandler(NetworkChange_NetworkAddressChanged);}void NetworkChange_NetworkAddressChanged(object sender, EventArgs e){ IsConnectedToInternet = (Microsoft.Phone.Net.NetworkInformation.NetworkInterface.NetworkInterfaceType != Microsoft.Phone.Net.NetworkInformation.NetworkInterfaceType.None);} Push Notification Push notification allows your application to receive notifications in a way that reduces the application’s power needs. This MSDN article is a good place to get the basics of push notification, but you can see the essential concept in the diagram below.  There are three types of push notification: toast, Tile and raw.  The first two work regardless of the state of the application where as raw messages are discarded if your application is not running.   Live Tiles Live tiles are one of the main differentiators of the Windows Phone platform.  They allow users to find information at a glance from their start screen without navigating into individual apps.  Knowing how to implement them can be a great boost to the attractiveness of your application. The simplest step-by-step explanation for creating live tiles is here. Local Database While your application really only has Isolated Storage as a data store there are some ways of giving you database functionality to develop against.  There are a number of open source ORM style solutions.  Probably the best and most native way I have found is to use LINQ to SQL.  It does take a significant amount of setup, but the ease of use once it is configured is worth the cost.  Rather than repeat the full concepts here I will point you to a post that I wrote previously. Tasks (Bing, Email) Leveraging built in features of the Windows Phone platform is an easy way to add functionality that would be expensive to develop on your own.  The classes that you need to make yourself familiar with are BingMapsDirectionsTask and EmailComposeTask.  This will allow your application to supply directions and give the user an email path to relay information to friends and associates. Event model Because of the ability for users to switch quickly to switch to other apps or the home screen is just one reason why knowing the Windows Phone event model is important.  You need to be able to save data so that if a user gets a phone call they can come back to exactly where they were in your application.  This means that you will need to handle such events as Launching, Activated, Deactivated and Closing at an application level.  You will probably also want to get familiar with the OnNavigatedTo and OnNavigatedFrom events at the page level.  These will give you an opportunity to save data as a user navigates through your app. Summary This is just a small portion of the concepts that you will use while building Windows Phone apps, but these are some of the most critical.  With the launch of Windows Phone 8 this list will probably expand.  Take the time to investigate these topics further and try them out in your apps. del.icio.us Tags: Windows Phone 7,Windows Phone,WP7,Software Development,70-599

    Read the article

  • What Counts for A DBA: Observant

    - by drsql
    When walking up to the building where I work, I can see CCTV cameras placed here and there for monitoring access to the building. We are required to wear authorization badges which could be checked at any time. Do we have enemies?  Of course! No one is 100% safe; even if your life is a fairy tale, there is always a witch with an apple waiting to snack you into a thousand years of slumber (or at least so I recollect from elementary school.) Even Little Bo Peep had to keep a wary lookout.    We nerdy types (or maybe it was just me?) generally learned on the school playground to keep an eye open for unprovoked attack from simpler, but more muscular souls, and take steps to avoid messy confrontations well in advance. After we’d apprehensively negotiated adulthood with varying degrees of success, these skills of watching for danger, and avoiding it,  translated quite well to the technical careers so many of us were destined for. And nowhere else is this talent for watching out for irrational malevolence so appropriate as in a career as a production DBA.   It isn’t always active malevolence that the DBA needs to watch out for, but the even scarier quirks of common humanity.  A large number of the issues that occur in the enterprise happen just randomly or even just one time ever in a spurious manner, like in the case where a person decided to download the entire MSDN library of software, cross join every non-indexed billion row table together, and simultaneously stream the HD feed of 5 different sporting events, making the network access slow while the corporate online sales just started. The decent DBA team, like the going, gets tough under such circumstances. They spring into action, checking all of the sources of active information, observes the issue is no longer happening now, figures that either it wasn’t the database’s fault and that the reboot of the whatever device on the network fixed the problem.  This sort of reactive support is good, and will be the initial reaction of even excellent DBAs, but it is not the end of the story if you really want to know what happened and avoid getting called again when it isn’t even your fault.   When fires start raging within the corporate software forest, the DBA’s instinct is to actively find a way to douse the flames and get back to having no one in the company have any idea who they are.  Even better for them is to find a way of killing a potential problem while the fires are small, long before they can be classified as raging. The observant DBA will have already been monitoring the server environment for months in advance.  Most troubles, such as disk space and security intrusions, can be predicted and dealt with by alerting systems, whereas other trouble can come out of the blue and requires a skill of observing ongoing conditions and noticing inexplicable changes that could signal an emerging problem.  You can’t automate the DBA, because the bankable skill of a DBA is in detecting the early signs of unexpected problems, and working out how to deal with them before anyone else notices them.    To achieve this, the DBA will check the situation as it is currently happening,  and in many cases is likely to have been the person who submitted the problem to the level 1 support person in the first place, just to let the support team know of impending issues (always well received, I tell you what!). Database and host computer settings, configurations, and even critical data might be profiled and captured for later comparisons. He’ll use Monitoring tools, built-in, commercial (Not to be too crassly commercial or anything, but there is one such tool is SQL Monitor) and lots of homebrew monitoring tools to monitor for problems and changes in the server environment.   You will know that you have it right when a support call comes in and you can look at your monitoring tools and quickly respond that “response time is well within the normal range, the query that supports the failing interface works perfectly and has actually only been called 67% as often as normal, so I am more than willing to help diagnose the problem, but it isn’t the database server’s fault and is probably a client or networking slowdown causing the interface to be used less frequently than normal.” And that is the best thing for any DBA to observe…

    Read the article

  • StreamInsight 2.1 Released

    - by Roman Schindlauer
    The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

    Read the article

  • StreamInsight 2.1 Released

    - by Roman Schindlauer
    The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

    Read the article

  • Pain Comes Instantly

    - by user701213
    When I look back at recent blog entries – many of which are not all that current (more on where my available writing time is going later) – I am struck by how many of them focus on public policy or legislative issues instead of, say, the latest nefarious cyberattack or exploit (or everyone’s favorite new pastime: coining terms for the Coming Cyberpocalypse: “digital Pearl Harbor” is so 1941). Speaking of which, I personally hope evil hackers from Malefactoria will someday hack into my bathroom scale – which in a future time will be connected to the Internet because, gosh, wouldn’t it be great to have absolutely everything in your life Internet-enabled? – and recalibrate it so I’m 10 pounds thinner. The horror. In part, my focus on public policy is due to an admitted limitation of my skill set. I enjoy reading technical articles about exploits and cybersecurity trends, but writing a blog entry on those topics would take more research than I have time for and, quite honestly, doesn’t play to my strengths. The first rule of writing is “write what you know.” The bigger contributing factor to my recent paucity of blog entries is that more and more of my waking hours are spent engaging in “thrust and parry” activity involving emerging regulations of some sort or other. I’ve opined in earlier blogs about what constitutes good and reasonable public policy so nobody can accuse me of being reflexively anti-regulation. That said, you have so many cycles in the day, and most of us would rather spend it slaying actual dragons than participating in focus groups on whether dragons are really a problem, whether lassoing them (with organic, sustainable and recyclable lassos) is preferable to slaying them – after all, dragons are people, too - and whether we need lasso compliance auditors to make sure lassos are being used correctly and humanely. (A point that seems to evade many rule makers: slaying dragons actually accomplishes something, whereas talking about “approved dragon slaying procedures and requirements” wastes the time of those who are competent to dispatch actual dragons and who were doing so very well without the input of “dragon-slaying theorists.”) Unfortunately for so many of us who would just get on with doing our day jobs, cybersecurity is rapidly devolving into the “focus groups on dragon dispatching” realm, which actual dragons slayers have little choice but to participate in. The general trend in cybersecurity is that powers-that-be – which encompasses groups other than just legislators – are often increasingly concerned and therefore feel they need to Do Something About Cybersecurity. Many seem to believe that if only we had the right amount of regulation and oversight, there would be no data breaches: a breach simply must mean Someone Is At Fault and Needs Supervision. (Leaving aside the fact that we have lots of home invasions despite a) guard dogs b) liberal carry permits c) alarm systems d) etc.) Also note that many well-managed and security-aware organizations, like the US Department of Defense, still get hacked. More specifically, many powers-that-be feel they must direct industry in a multiplicity of ways, up to and including how we actually build and deploy information technology systems. The more prescriptive the requirement, the more regulators or overseers a) can be seen to be doing something b) feel as if they are doing something regardless of whether they are actually doing something useful or cost effective. Note: an unfortunate concomitant of Doing Something is that often the cure is worse than the ailment. That is, doing what overseers want creates unfortunate byproducts that they either didn’t foresee or worse, don’t care about. After all, the logic goes, we Did Something. Prescriptive practice in the IT industry is problematic for a number of reasons. For a start, prescriptive guidance is really only appropriate if: • It is cost effective• It is “current” (meaning, the guidance doesn’t require the use of the technical equivalent of buggy whips long after horse-drawn transportation has become passé)*• It is practical (that is, pragmatic, proven and effective in the real world, not theoretical and unproven)• It solves the right problem With the above in mind, heading up the list of “you must be joking” regulations are recent disturbing developments in the Payment Card Industry (PCI) world. I’d like to give PCI kahunas the benefit of the doubt about their intentions, except that efforts by Oracle among others to make them aware of “unfortunate side effects of your requirements” – which is as tactful I can be for reasons that I believe will become obvious below - have gone, to-date, unanswered and more importantly, unchanged. A little background on PCI before I get too wound up. In 2008, the Payment Card Industry (PCI) Security Standards Council (SSC) introduced the Payment Application Data Security Standard (PA-DSS). That standard requires vendors of payment applications to ensure that their products implement specific requirements and undergo security assessment procedures. In order to have an application listed as a Validated Payment Application (VPA) and available for use by merchants, software vendors are required to execute the PCI Payment Application Vendor Release Agreement (VRA). (Are you still with me through all the acronyms?) Beginning in August 2010, the VRA imposed new obligations on vendors that are extraordinary and extraordinarily bad, short-sighted and unworkable. Specifically, PCI requires vendors to disclose (dare we say “tell all?”) to PCI any known security vulnerabilities and associated security breaches involving VPAs. ASAP. Think about the impact of that. PCI is asking a vendor to disclose to them: • Specific details of security vulnerabilities • Including exploit information or technical details of the vulnerability • Whether or not there is any mitigation available (as in a patch) PCI, in turn, has the right to blab about any and all of the above – specifically, to distribute all the gory details of what is disclosed - to the PCI SSC, qualified security assessors (QSAs), and any affiliate or agent or adviser of those entities, who are in turn permitted to share it with their respective affiliates, agents, employees, contractors, merchants, processors, service providers and other business partners. This assorted crew can’t be more than, oh, hundreds of thousands of entities. Does anybody believe that several hundred thousand people can keep a secret? Or that several hundred thousand people are all equally trustworthy? Or that not one of the people getting all that information would blab vulnerability details to a bad guy, even by accident? Or be a bad guy who uses the information to break into systems? (Wait, was that the Easter Bunny that just hopped by? Bringing world peace, no doubt.) Sarcasm aside, common sense tells us that telling lots of people a secret is guaranteed to “unsecret” the secret. Notably, being provided details of a vulnerability (without a patch) is of little or no use to companies running the affected application. Few users have the technological sophistication to create a workaround, and even if they do, most workarounds break some other functionality in the application or surrounding environment. Also, given the differences among corporate implementations of any application, it is highly unlikely that a single workaround is going to work for all corporate users. So until a patch is developed by the vendor, users remain at risk of exploit: even more so if the details of vulnerability have been widely shared. Sharing that information widely before a patch is available therefore does not help users, and instead helps only those wanting to exploit known security bugs. There’s a shocker for you. Furthermore, we already know that insider information about security vulnerabilities inevitably leaks, which is why most vendors closely hold such information and limit dissemination until a patch is available (and frequently limit dissemination of technical details even with the release of a patch). That’s the industry norm, not that PCI seems to realize or acknowledge that. Why would anybody release a bunch of highly technical exploit information to a cast of thousands, whose only “vetting” is that they are members of a PCI consortium? Oracle has had personal experience with this problem, which is one reason why information on security vulnerabilities at Oracle is “need to know” (we use our own row level access control to limit access to security bugs in our bug database, and thus less than 1% of development has access to this information), and we don’t provide some customers with more information than others or with vulnerability information and/or patches earlier than others. Failure to remember “insider information always leaks” creates problems in the general case, and has created problems for us specifically. A number of years ago, one of the UK intelligence agencies had information about a non-public security vulnerability in an Oracle product that they circulated among other UK and Commonwealth defense and intelligence entities. Nobody, it should be pointed out, bothered to report the problem to Oracle, even though only Oracle could produce a patch. The vulnerability was finally reported to Oracle by (drum roll) a US-based commercial company, to whom the information had leaked. (Note: every time I tell this story, the MI-whatever agency that created the problem gets a bit shirty with us. I know they meant well and have improved their vulnerability handling/sharing processes but, dudes, next time you find an Oracle vulnerability, try reporting it to us first before blabbing to lots of people who can’t actually fix the problem. Thank you!) Getting back to PCI: clearly, these new disclosure obligations increase the risk of exploitation of a vulnerability in a VPA and thus, of misappropriation of payment card data and customer information that a VPA processes, stores or transmits. It stands to reason that VRA’s current requirement for the widespread distribution of security vulnerability exploit details -- at any time, but particularly before a vendor can issue a patch or a workaround -- is very poor public policy. It effectively publicizes information of great value to potential attackers while not providing compensating benefits - actually, any benefits - to payment card merchants or consumers. In fact, it magnifies the risk to payment card merchants and consumers. The risk is most prominent in the time before a patch has been released, since customers often have little option but to continue using an application or system despite the risks. However, the risk is not limited to the time before a patch is issued: customers often need days, or weeks, to apply patches to systems, based upon the complexity of the issue and dependence on surrounding programs. Rather than decreasing the available window of exploit, this requirement increases the available window of exploit, both as to time available to exploit a vulnerability and the ease with which it can be exploited. Also, why would hackers focus on finding new vulnerabilities to exploit if they can get “EZHack” handed to them in such a manner: a) a vulnerability b) in a payment application c) with exploit code: the “Hacking Trifecta!“ It’s fair to say that this is probably the exact opposite of what PCI – or any of us – would want. Established industry practice concerning vulnerability handling avoids the risks created by the VRA’s vulnerability disclosure requirements. Specifically, the norm is not to release information about a security bug until the associated patch (or a pretty darn good workaround) has been issued. Once a patch is available, the notice to the user community is a high-level communication discussing the product at issue, the level of risk associated with the vulnerability, and how to apply the patch. The notices do not include either the specific customers affected by the vulnerability or forensic reports with maps of the exploit (both of which are required by the current VRA). In this way, customers have the tools they need to prioritize patching and to help prevent an attack, and the information released does not increase the risk of exploit. Furthermore, many vendors already use industry standards for vulnerability description: Common Vulnerability Enumeration (CVE) and Common Vulnerability Scoring System (CVSS). CVE helps ensure that customers know which particular issues a patch addresses and CVSS helps customers determine how severe a vulnerability is on a relative scale. Industry already provides the tools customers need to know what the patch contains and how bad the problem is that the patch remediates. So, what’s a poor vendor to do? Oracle is reaching out to other vendors subject to PCI and attempting to enlist then in a broad effort to engage PCI in rethinking (that is, eradicating) these requirements. I would therefore urge all who care about this issue, but especially those in the vendor community whose applications are subject to PCI and who may not have know they were being asked to tell-all to PCI and put their customers at risk, to do one of the following: • Contact PCI with your concerns• Contact Oracle (we are looking for vendors to sign our statement of concern)• And make sure you tell your customers that you have to rat them out to PCI if there is a breach involving the payment application I like to be charitable and say “PCI meant well” but in as important a public policy issue as what you disclose about vulnerabilities, to whom and when, meaning well isn’t enough. We need to do well. PCI, as regards this particular issue, has not done well, and has compounded the error by thus far being nonresponsive to those of us who have labored mightily to try to explain why they might want to rethink telling the entire planet about security problems with no solutions. By Way of Explanation… Non-related to PCI whatsoever, and the explanation for why I have not been blogging a lot recently, I have been working on Other Writing Venues with my sister Diane (who has also worked in the tech sector, inflicting upgrades on unsuspecting and largely ungrateful end users). I am pleased to note that we have recently (self-)published the first in the Miss Information Technology Murder Mystery series, Outsourcing Murder. The genre might best be described as “chick lit meets geek scene.” Our sisterly nom de plume is Maddi Davidson and (shameless plug follows): you can order the paper version of the book on Amazon, or the Kindle or Nook versions on www.amazon.com or www.bn.com, respectively. From our book jacket: Emma Jones, a 20-something IT consultant, is working on an outsourcing project at Tahiti Tacos, a restaurant chain offering Polynexican cuisine: refried poi, anyone? Emma despises her boss Padmanabh, a brilliant but arrogant partner in GD Consulting. When Emma discovers His-Royal-Padness’s body (verdict: death by cricket bat), she becomes a suspect.With her overprotective family and her best friend Stacey providing endless support and advice, Emma stumbles her way through an investigation of Padmanabh’s murder, bolstered by fusion food feeding frenzies, endless cups of frou-frou coffee and serious surfing sessions. While Stacey knows a PI who owes her a favor, landlady Magda urges Emma to tart up her underwear drawer before the next cute cop with a search warrant arrives. Emma’s mother offers to fix her up with a PhD student at Berkeley and showers her with self-defense gizmos while her old lover Keoni beckons from Hawai’i. And everyone, even Shaun the barista, knows a good lawyer. Book 2, Denial of Service, is coming out this summer. * Given the rate of change in technology, today’s “thou shalts” are easily next year’s “buggy whip guidance.”

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >