Search Results

Search found 26097 results on 1044 pages for 'network share'.

Page 214/1044 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

    - by Dean Hill
    I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

    Read the article

  • ifcf-ethx problem

    - by Shahmir Javaid
    Every time i run service networkd restart This is what i get Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up interface eth0: ** (process:12951): WARNING **: fetch_connections_done: error fetching user connections: (2) The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files. Active connection state: activating Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 state: activated Connection activated [ OK ] Here is my ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller DEVICE=eth0 BOOTPROTO=dhcp DEFROUTE=yes DHCPCLASS= HWADDR=xxx IPV4_FAILURE_FATAL=yes IPV6INIT=no ONBOOT=yes OPTIONS=layer2=1 PEERDNS=yes PEERROUTES=yes TYPE=Ethernet UUID=xxx And my ifcfg-eth1 # Intel Corporation 82541PI Gigabit Ethernet Controller DEVICE=eth1 HWADDR=xxx ONBOOT=no And my ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback Any ideas?

    Read the article

  • Can a malicious hacker share Linux distributions which trust bad root certificates?

    - by iamrohitbanga
    Suppose a hacker launches a new Linux distro with firefox provided with it. Now a browser contains the certificates of the root certification authorities of PKI. Because firefox is a free browser anyone can package it with fake root certificates. Thus a fake root certificate would contain a the certification authority that is not actually certified. Can this be used to authenticate some websites. How? Many existing linux distros are mirrored by people. They can easily package software containing certificates that can lead to such attacks. Is the above possible? Has such an attack taken place before?

    Read the article

  • How can Django/WSGI and PHP share / on Apache?

    - by Mark Snidovich
    I have a server running an established PHP site, as well as some Django apps. Currently, a VirtualHost set up for PHP listens on port 80, and requests to certain directories are proxied to a VirtualHost set up for Django with WSGI. I'd like to change it so Django handles anything not existing as a PHP script or static file. For example, / -parsed by PHP as index.php /page.php -parsed as PHP normally /images/border.jpg -served as a static file /johnfreep -handled by Django (interpreted by urls.py) /pages/john -handled by Django /(anything else) - handled by Django I have a few ideas. It seems the options are 'php first' or 'wsgi first'. set up Django on port 80, and set Apache to skip all the known PHP, CSS or image files. Maybe using SetHandler? Anything else goes to Django to be parsed by urls.py. Set up a script referring everything to Django as a 404 handler on PHP. So, if a file is not found for a name, it sends the request path to a VirtualHost running Django to be parsed.

    Read the article

  • How to make network drives appear even if disconnected?

    - by Jake
    I have the same problem as many others: network and home drives set by group policy and AD are not connected on windows startup. The prime suspect is that the LAN or wireless does not connect until after user log in. I have already given up on that. Now, I just want the disconnected drives to continue to list in My Computer so that if the user goes in and double click the drive, it will connect again. However, on some machines the drive is completely missing from My Computer. If I right click My Computer Map Network Drive again, it does work. But it's very troublesome to do it all the time. And I don't want to use a script to map the drives because I don't want to appear to be using a hacky solution to the users. The drives listed as disconnected will look more like a "built-in feature", and gives users more confidence. How can I keep the disconnected drives in My Computer? I am using Windows 7 Professional and Win2k8.

    Read the article

  • IIS SMTP unable to relay for domain on local network.

    - by MartinHN
    Hi I have a network with the following servers: EXCH01 - Exchange Server for @domain.com e-mails. TEST-REP01 - Local reporting server. Have IIS SMTP installed and configured. What happens on the TEST-REP01, is that I have a Windows Service that reads reports in a SQL server that is ready for delivery. All reports is sent one at a time, using the local SMTP server. It works perfectly, unless the recipient e-mail address is [email protected] - the domain that the EXCH01 server manages. I get the following error: Mailbox unavailable. The server response was: 5.7.1 Unable to relay for [email protected] What can I do to troubleshoot this further? I can't seem to find useful information in the SMTP log: 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - Relay access on the local IIS (TEST-REP01) are set to allow 127.0.0.1, TEST-REP01 and other servers such as TEST-WEB01. DNS settings on the local network is not domain.com - but companyname-domain.local.

    Read the article

  • ACL in linux-based samba shares

    - by Odin
    If I mount a samba share like this from a linux server using ACL in ext3... mount -t cifs //192.168.0.10/smbshare /mnt/smbshare -o user=root password=secret ...and access the share with linux/smb-user smbuser. I have given smbuser write access to all catalogs, but when I write something to the share the owner becomes root (the user that mountet the share). Is there any possibility to make smbuser the owner of the files/catalogs he creates even if the share is mountet by the root-user? This case is supposed to work on a linux terminal server so many different users access the smb share (mountet by root).

    Read the article

  • Can we increase Torrent share ratio using Local Peer Discovery?

    - by Jagira
    I just want to know whether this is a flaw or not in Bittorrent system. Let us assume that I am member of a Private Torrent site which requires me to maintain a specific upload to download ratio. Will this work: I create a torrent of a large file say [ Fedora Linux ~ 4 GB ] and upload it to the tracker I download the same torrent using my ID and start it on another machine on LAN or a Virtual machine Both clients have Local Peer Discovery enabled, so they will find 'em [ not via DHT ] and start x'ferring data using LAN bandwidth at LAN speeds. Though both uploads and downloads will increase, my ratio will also increase If I reiterate the entire process 'n' times, the numerator in the "RATIO" i.e Upload will become so large that the effect of downloads on ratio will become less. I want to know whether this is legitimate???

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • How can I share a video file during a webinar?

    - by Brien Malone
    Here is the scenario: I have a number of remote employees around the globe. I want to have a video chatting session. No problem there. Halfway through, I want to shut off all camera video feeds and simulcast (synchronous) a training video to my team. How do I do this? We have tried office communicator, but the frame rate was awful and no audio. Adobe Connect had similar trouble. In both cases we were limited by the main office's small internet pipe, but it is clear that video delivered by shared desktop is not a good solution.

    Read the article

  • Does the Fast Video Download addon share my data?

    - by Frost Shadow
    I've installed the Fast Video Download version 3.0.8 addon for Firefox to download flash videos, like from youtube. What I'm wondering is, how does the addon download it, and do other people see that i'm downloading the videos? For example, is all the software to download the video already on my computer, or does the addon contact someone else to get the video, or let them know? Can the webpage's administrator see I'm downloading the video?

    Read the article

  • Can I get simple name resolution on the local network without DNS, on a Mac?

    - by tim
    I've got Mantis running on a Linux VM with a Win2k8 server host. I installed Samba with the following configuration: [global] workgroup = COMPANY netbios name = MANTIS security = share Now on all our windows machines people can simple go to http://mantis, rather than http://172.16.0.20. However, this doesn't appear to work on the Mac machines. Any ideas how I can sort this without changing anything on the Windows server?

    Read the article

  • How can I determine what is killing my network adapter win7 or vista?

    - by datatoo
    I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

    Read the article

  • Do I have to chmod 777 my NFS folder when I share?

    - by luckytaxi
    Under Redhat, if I export a folder as an NFS mount, does the folder have to have RW for users/groups/others? Right now /storage/software is -rwxr-xr-x root/root i.e. /etc/exportfs /storage/software *(rw,sync) On my client, I can mount but I can't write. I'm using a regular user and NOT root. I think "no_root_squash" fixes it but I really don't want that. Then again, nor do I want to have to chmod 777 the folder on the server.

    Read the article

  • 10.6.4 Apple Wiki: New just created users can do nothing?

    - by beefon
    Hello, After update to 10.6.4 there's an issue: any new users that I create in Server Prefs/WGM can't post to their blogs, comment, create wiki pages... They can't do anything! There's log from Wiki errors (when user DURAK tries to create new blog entry): [HTTPChannel,5,127.0.0.1] Traceback (most recent call last): [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/web/server.py", line 126, in process self.render(resrc) [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/web/server.py", line 133, in render body = resrc.render(self) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_xmlrpc_server/WebAppServer.py", line 90, in render d = defer.maybeDeferred(function, *args) [HTTPChannel,5,127.0.0.1] File "/usr/share/caldavd/lib/python/twisted/internet/defer.py", line 104, in maybeDeferred result = f(*args, **kw) [HTTPChannel,5,127.0.0.1] --- <exception caught here> --- [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_xmlrpc_server/ContentServiceBase.py", line 121, in xmlrpc_addEntry aPage = ContentEntry.newBundleBasedContentEntry (path = path, content = content, author = author, title = title, uid = uid, type = kind, versioned = self.versioned, templateName = template) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_wlt/ContentEntry.py", line 794, in newBundleBasedContentEntry aPage.save('First created', 'created') [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_wlt/ContentEntry.py", line 445, in save revisions.addRevision(self.serializeEntry(revisionAttributes), inComment = comment, inAuthor = updateAuthor, inChangeType = editType) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_utilities/sqlitersion.py", line 36, in _func result = f(self, *args, **kwargs) [HTTPChannel,5,127.0.0.1] File "/usr/share/wikid/lib/python/apple_utilities/sqlitersion.py", line 49, in addRevision contentPlistStr = plistlib.writePlistToString(inContentDict).decode("utf-8") [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 110, in writePlistToString [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 94, in writePlist [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 251, in writeValue [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 280, in writeDict [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 238, in writeValue [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 171, in simpleElement [HTTPChannel,5,127.0.0.1] File "/S-m/Lib-ry/Fr-ks/Python.fr-k/Ver-s/2.6/lib/pyth-2.6/plistlib.py", line 221, in _escapeAndEncode [HTTPChannel,5,127.0.0.1] exceptions.UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 0: ordinal not in range(128) [HTTPChannel,5,127.0.0.1] 'Unparseable html in page, removing whatever was already written.' [HTTPChannel,5,127.0.0.1] Removing /Library/Collaboration/Users/durak/weblog/27133.page Any "old" user CAN create, modify, comment, etc. What can you recommend to fix this issue? Hope for your help...

    Read the article

  • Why does writing a file to an NFS share send a COMMIT operation to the NFS server?

    - by Antonis Christofides
    I have a Debian squeeze (2.6.32-5-amd64) which is at the same time a NFS4 server and client (it mounts itself through NFS4). The local directory that leads directly to disk is /nfs4exports/mydir, whereas /nfs4mounts/mydir is the same thing mounted through NFS, using the machine's external IP address. Here is the line from fstab: 192.168.1.75:/mydir /nfs4mounts/mydir nfs4 soft 0 0 I have an application that writes many small files. If I write directly to /nfs4exports/mydir, it writes thousands of files per second; but if I write to /nfs4mounts/mydir, it writes 4 files per second or so. I can greatly increase speed if I add async to /etc/exports. (Writing a single large file to the NFS-mounted directory goes at more than 100 MB/s.) I examine the server statistics and I see that whenever a file is written, it is "committed" (this also happens with NFSv3): root@debianvboxtest:~# mount -t nfs4 192.168.1.75:/mydir /mnt root@debianvboxtest:~# nfsstat|grep -A 2 'nfs v4 operations' Server nfs v4 operations: op0-unused op1-unused op2-future access close commit 0 0% 0 0% 0 0% 10 4% 1 0% 1 0% root@debianvboxtest:~# echo 'hello' >/mnt/test1056 root@debianvboxtest:~# nfsstat|grep -A 2 'nfs v4 operations' Server nfs v4 operations: op0-unused op1-unused op2-future access close commit 0 0% 0 0% 0 0% 11 4% 2 0% 2 0% Now in the RFC, I read this: The COMMIT operation is similar in operation and semantics to the POSIX fsync(2) system call that synchronizes a file's state with the disk (file data and metadata is flushed to disk or stable storage). COMMIT performs the same operation for a client, flushing any unsynchronized data and metadata on the server to the server's disk or stable storage for the specified file. I don't understand why the client commits. I don't think that the "echo" shell built-in command runs fsync; if echo wrote to a local file and then the machine went down, the file might be lost. In contrast, the NFS client appears to be sending a COMMIT upon completion of the echo. Why? I am reluctant to use the async NFS server option, because it would apparently ignore COMMIT. I feel as if I had a local filesystem and I had to choose between syncing every file upon close and ignoring fsync altogether. What have I understood wrong?

    Read the article

  • RTNETLINK answers: File exists... maybe because assigned a new mac adress

    - by steven
    I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

    Read the article

  • How do I access my samba drive through several layers of network topology?

    - by stephenmm
    I have a new windows 7 Home Premium machine that is in a different room than my main computer area. As such I have to use a bridge and another router. Everything is working wonderfully except I cannot access the SAMBA drive with the new machine. I know that SAMBA is accessible as an older WinXP machine can access it. A picture of my network would probably be helpfull: To ISP | | +---------------------------+ | WAN | | Cable Modem | | (2WIRE678) | | | | | +---------------------------+ | +---------------------------+ | | (|) (|) +-----------+ | Belkin Router | | | | Wireless | | (F5D) |--+ +--| WinXP | | | |SAMBA USER | | | +-----------+ +---------------------------+ | | | | +------------+ | | Ubuntu | | | Apache + | | |SAMBA Server| | +------------+ | | +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ # # +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ | +---------------------------+ | | | D-Link Router | | (DI-524) | | | | | +---------------------------+ | | | | +-----------+ | | | Win7 | |SAMBA USER?| +-----------+ More interesting data points: 1. I can ping the SAMBA server from the Win7 machine locally (Ie. 192.168.2.2) 2. I can access the webserver from the Win7 machine locally (Ie. 192.168.2.2) 3. I followed the advice to get Win7 and SAMBA to play nice: http://www.tannerwilliamson.com/2009/09/windows-7-seven-network-file-sharing-fix-samba-smb/ Sorry for being so long winded but it is kind of complex and I am really at a loss as to how to fix it. If any of you have some suggestions I would love to hear it!

    Read the article

  • Windows 7 Automatically Connecting To Unsecured Wireless Networks On Startup

    - by Xtend
    Most of the questions on this topic related to folks connecting to somebody else's wireless network when their own was available and could remedy the situation by going to their connections and unchecking the "connect automatically" box. See this: " Avoid automatically connecting to wireless network on windows 7 " as an example. In my situation, I've noticed that Win 7 will automatically connect to any unsecured wifi network - even if I have never connected to it in the past. If I am traveling and boot Win 7, it will start and connect to what appears to be the best signaled unsecured network without prompting me for confirmation (note: in the above link, "Naveen" seems to have same problem). Obviously, that is a security concern to me. Further, when I open "Network and Sharing" and "Manage wireless networks" the network is not displayed (probably because I labelled it a public network). Again, these are new, never connected with before, wireless networks. I always promptly disconnect from them but don't want to have to be on constant guard for an auto connection to a malicious network. This began about a month ago, as I recall, Win 7 did not behave like this in the past, I didn't monkey with wifi settings, and don't use a 3rd party connection manager. I did have to download some internet security certificates for army website access but I don't think that should mess with network settings. Any ideas how I can tell Win7 cease automatically connecting to networks or, at least, to prompt me for a confirmation before connecting?

    Read the article

  • What's a good way to share a value in multiple places in a Word document?

    - by jcollum
    Let's say I have a value: \\myServer\dir1\dir2\dir3. I'd like this value to appear in multiple places in an MSWord document. However I only want to write it down once. What's a good way to do this? Fields seem like the answer but I can't get it to work; maybe it's not the answer. I'd like to be able to do this without any macros; it adds too much complexity. I need something more like Excel -- write a cell value here, reference it there, change the original value and the reference gets updated too. Edit: ideally I'd have the value updated automatically (fields don't seem to want to do that!).

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >