Search Results

Search found 24616 results on 985 pages for 'number'.

Page 214/985 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• The KMPlayer ... playing with colors

  - by ldigas

  I'm not a video editing type, so go easy on me ... practically don't know anything on the subject except that for some videos I view, "color modifying" works (buttons n, j, r for reset ...) and for some it doesn't. What influences that and how can I incluence contrast, saturation and so on on every video I play? (mostly some recordings of experiments in poor light conditions, so those controls really come in handy when viewing some details before taking out snapshots for reports) Also, KMPlayer has an enormous number of options. Is there one somewhere that can take a snapshot in a predefined directory of the what-I-see-on-screen every xy number of seconds?

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• unix command to verify span of word in text

  - by Ocasta Eshu

  What unix command(s) can I use to determine the line span that a word appears in text? The "span" being equal to the line number of the last instance of a word minus the line number of the first instance of the word. 1| unix is on two lines 2| once above, and once below 3| unix In the example above the "span" of 'unix' would be 2 (3-1). So far I've been trying to make use of grep -n but I don't think that grep is powerful enough. Maybe some use of sed or awk? Thanks!

  Read the article

• Server Fault Wiki: How does Subnetting Work?

  - by Kyle Brandt

  How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

  Read the article

• Syncing between "kindle for PC" and "kindle for iPhone"

  - by Lou

  I have a number of ebooks that I am managing using calibre - E-book management. These books are in a number of various formats (pdf, chm, epub, mobi...etc). I found a blog post that detailed using calibre to convert the ebooks to ".mobi" versions and then, by double-clicking on the converted books, they would be added to my "kindle for PC" library. This worked very well. However, I can't seem to work out how to sync the books I've added to my "kindle for PC" library with my "kindle for iPhone" library. I should also mention that I do not own a kindle, all I'm trying to achieve is to be able to sync the books I've added to "kindle for PC" to "kindle for iPhone". Has anyone managed to do this? thanks.

  Read the article

• Can I configure a DNS cache not to forward AAAA queries?

  - by itsadok

  I'm setting up an internal DNS cache because my firewall is having trouble handling all the sessions created by DNS requests. I tried using bind9, dnsmasq and DJB dnscache, they all help reduce the number of requests leaving my network, but there are still a lot of request being made. Looking at the log files, and tcpdump and dnstop outputs, it seems that requests that return SERVFAIL do not get cached at all. And a lot of those failed requests are AAAA requests, which is a shame, because I do not have ipv6 enabled on any server. I've looked at several ways to help the situation, and I think if I could somehow prevent AAAA record requests from being forwarded by the DNS cache, it would reduce the number of requests significantly. The closest thing I found was the filter-aaaa-on-v4 option in BIND9. However, this only removes the record from the server response, and does not prevent it from forwarding it. Any help would be appreciated.

  Read the article

• Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

  Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

  Read the article

• Questions about Mac Book Pro Keyboard and shortcuts

  - by SimonSolnes

  I have been researching a lot about this and I cannot seem to find any useful information about this topic, what so ever. I have now been using Ubuntu in one week, and have gotten pretty confident with almost everything. Except keyboard layout and shortcuts. If you know a tutorial or a documents explaining keyboard shortcuts in Ubuntu or linux in general, can you please list it? I use a Mac Book Pro with a Norwegian keyboard, and I have several questions about this: Is there a program for having a consise list of absolutely all keyboard shortcuts, and be able to change them? How do I use my fn keys? (fn button doesnt do the job for some reason) How can I use my alt+letter-key-or-number-key or alt+shift+letter-key-or-number-key to get fancy characters. (Like I do on Mac OS X) How can I swap cmd and ctrl key system wide? Also I really want to be oriented around this subject, since this is the only thing holding me back on Ubuntu, so if there exists some in-depth material on this, it would be great. Also, if there exists some programs or material out there making it easier with Mac hardware I would enjoy that. Sorry if my questions seems vague. Thank you very much Simon

  Read the article

• Monitoring HP and Dell hardware in Gentoo.

  - by ewwhite

  I'm working in an environment that features a large number of Gentoo servers running on HP ProLiant and Dell PowerEdge equipment. While I've moved some of these systems to RedHat or CentOS for consistency, I'm still left with a good number of systems that will remain Gentoo. One of the issues I see with the Gentoo arrangement is lack of vendor-supported hardware monitoring. There doesn't seem to be an equivalent to the HP ProLiant Support Pack or Dell's agents for Gentoo. Is this simply something that you give up when using this distribution? How do you monitor hardware health and the like with Gentoo systems?

  Read the article

• Per-vertex animation with VBOs: VBO per character or VBO per animation?

  - by charstar

  Goal To leverage the richness of well vetted animation tools such as Blender to do the heavy lifting for a small but rich set of animations. I am aware of additive pose blending like that from Naughty Dog and similar techniques but I would prefer to expend a little RAM/VRAM to avoid implementing a thesis-ready pose solver. I would also like to avoid implementing a key-frame + interpolation curve solver (reinventing Blender vertex groups and IPOs), if possible. Scenario Meshes are animated using either skeletons (skinned animation) or some form of morph targets (i.e. per-vertex key frames). However, in either case, the animations are known in full at load-time, that is, there is no physics, IK solving, or any other form of in-game pose solving. The number of character actions (animations) will be limited but rich (hand-animated). There may be multiple characters using a each mesh and its animations simultaneously in-game (they will likely be at different frames of the same animation at the same time). Assume color and texture coordinate buffers are static. Current Considerations Much like a non-shader-powered pose solver, create a VBO for each character and copy vertex and normal data to each VBO on each frame (VBO in STREAMING). Create one VBO for each animation where each frame (interleaved vertex and normal data) is concatenated onto the VBO. Then each character simply has a buffer pointer offset based on its current animation frame (e.g. pointer offset = (numVertices+numNormals)*frameNumber). (VBO in STATIC) Known Trade-Offs In 1 above: Each VBO would be small but there would be many VBOs and therefore lots of buffer binding and vertex copying each frame. Both client and pipeline intensive. In 2 above: There would be few VBOs therefore insignificant buffer binding and no vertex data getting jammed down the pipe each frame, but each VBO would be quite large. Are there any pitfalls to number 2 (aside from finite memory)? I've found a lot of information on what you can do, but no real best practices. Are there other considerations or methods that I am missing?

  Read the article

• Use a webpage as a screen saver

  - by Stephen

  We have a number of retail stores that sell laptops. There are a number of display models on show in each retail store. At the moment screen savers are used to promote different offers and these screen savers are out of date. What I would like to do is open up a browser on these machines and just use a webpage. This way I can control exactly what is displayed and keep it up to date with our latest offers. Is it possible to have the webpage in full screen mode, with no address bar or tabs visible. As far as I'm aware these are Windows machines, probably running Windows Vista or Windows 7. Any help appreciated.

  Read the article

• Data structure for pattern matching.

  - by alvonellos

  Let's say you have an input file with many entries like these: date, ticker, open, high, low, close, <and some other values> And you want to execute a pattern matching routine on the entries(rows) in that file, using a candlestick pattern, for example. (See, Doji) And that pattern can appear on any uniform time interval (let t = 1s, 5s, 10s, 1d, 7d, 2w, 2y, and so on...). Say a pattern matching routine can take an arbitrary number of rows to perform an analysis and contain an arbitrary number of subpatterns. In other words, some patterns may require 4 entries to operate on. Say also that the routine (may) later have to find and classify extrema (local and global maxima and minima as well as inflection points) for the ticker over a closed interval, for example, you could say that a cubic function (x^3) has the extrema on the interval [-1, 1]. (See link) What would be the most natural choice in terms of a data structure? What about an interface that conforms a Ticker object containing one row of data to a collection of Ticker so that an arbitrary pattern can be applied to the data. What's the first thing that comes to mind? I chose a doubly-linked circular linked list that has the following methods: push_front() push_back() pop_front() pop_back() [] //overloaded, can be used with negative parameters But that data structure seems very clumsy, since so much pushing and popping is going on, I have to make a deep copy of the data structure before running an analysis on it. So, I don't know if I made my question very clear -- but the main points are: What kind of data structures should be considered when analyzing sequential data points to conform to a pattern that does NOT require random access? What kind of data structures should be considered when classifying extrema of a set of data points?

  Read the article

• How to record my voice on a Mac Mini with headphones?

  - by user718408

  I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

  Read the article

• USB drives not recognized all of a sudden

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. lsusb results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful. Thanks.

  Read the article

• Vim's relativenumber setting and multiple buffers

  - by connrs

  I like the relative number setting. I'm refactoring code at the moment (translation: explodicating 5 year old terrible methods and replacing them with nice code) and I find it useful to have the setting active on files as I open them I frequently either open multiple buffers or use a client/server vim to contain all my open buffers/files and have noticed that the relative number only seems to apply to the first buffer (and not the remaining buffers when I have set rnu in my .vimrc file.) Is it expected behaviour for rnu to only initially apply to the first buffer until you manually set it?

  Read the article

• How to implement early exit / return in Haskell?

  - by Giorgio

  I am porting a Java application to Haskell. The main method of the Java application follows the pattern: public static void main(String [] args) { if (args.length == 0) { System.out.println("Invalid number of arguments."); System.exit(1); } SomeDataType d = getData(arg[0]); if (!dataOk(d)) { System.out.println("Could not read input data."); System.exit(1); } SomeDataType r = processData(d); if (!resultOk(r)) { System.out.println("Processing failed."); System.exit(1); } ... } So I have different steps and after each step I can either exit with an error code, or continue to the following step. My attempt at porting this to Haskell goes as follows: main :: IO () main = do a <- getArgs if ((length args) == 0) then do putStrLn "Invalid number of arguments." exitWith (ExitFailure 1) else do -- The rest of the main function goes here. With this solution, I will have lots of nested if-then-else (one for each exit point of the original Java code). Is there a more elegant / idiomatic way of implementing this pattern in Haskell? In general, what is a Haskell idiomatic way to implement an early exit / return as used in an imperative language like Java?

  Read the article

• My New Job

  - by Stuart Brierley

  Last year I started a new job with a logistics company in the North of England, where I was responsible for the management, design and development of IT Integration strategies, architectures and solutions using BizTalk Server 2009.  This included the design and implementation of the BizTalk Server 2009 infrastructure, the definition of development standards, mentoring a fellow developer in the ways of BizTalk and migrating a number of existing solutions from Softshare over to BizTalk 2009. Unfortunately I then realised that, following this initial set up, there didn't actually seem to be that much BizTalk work for me to get stuck into and reluctantly I have now moved on from this role to a very similar role with the country's largest office supplies company.  Based in Sheffield, we distribute office supplies on a UK wide basis and computer supplies across Europe. The situation here is slightly different than when I first joined my previous employer.  Whereas that was a green field installation with no previous BizTalk solutions in place, my new employer currently has a number of live BizTalk 2000 (!) and BizTalk 2006 solutions in place.  Unfortunately the infrastructure around these is less than ideal; with no clear distinction between development and test environments and no source control what so ever! We are currently building a proposal for a new BizTalk Server 2010 implementation, where I am hopeful of being able to implement fully independent development, test and pseudo-live environments, alongside an enterprise level live installation.  We should also be introducing Team Foundation Server to the development process, thereby giving us some much needed source control capabilities. Following this is likely to be a period of migration for the existing BizTalk Solutions, along with the onward development of new projects and initiatives - I'm hoping to be a busy man for the forseeable future :o)

  Read the article

• Is my use case diagram correct?

  - by Dummy Derp

  NOTE: I am self studying UML so I have nobody to verify my diagrams and hence I am posting here, so please bear with me. This is the problem I got from some PDF available on Google that simply had the following problem statement: Problem Statement: A library contains books and journals. The task is to develop a computer system for borrowing books. In order to borrow a book the borrower must be a member of the library. There is a limit on the number of books that can be borrowed by each member of the library. The library may have several copies of a given book. It is possible to reserve a book. Some books are for short term loans only. Other books may be borrowed for 3 weeks. Users can extend the loans. 1. Draw a use case diagram for a library. 2. Give a use case description for two use cases: • Borrow copy of book • Extend loan Diagram: Use case description: 1. Borrow a copy of the book: If the person wishes to borrow a book from Derpville Public Library, he/she must be a member of the library in which case they will be allowed to issue a certain number of books. If the person is not a member, the book will not be issued to them for taking away, rather they will have to sit and read in the library. 2. Extending loan: Some books will be lent for 3 weeks while others will be lent for more than 3 weeks in which case the person borrowing has to come to the library and get the date extended. There is a limit on how much the user can extend the date of a particular book.

  Read the article

• How do I fix my installation of ATI Catalyst Video Drivers in 12.04 LTS?

  - by Boris

  My graphic card is a Mobility Radeon HD 4200 Series. I tried these 2 answers from What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? But unfortunately, it does not work for me: When running the amd script, I get this error message: $ sudo sh ./amd-driver-installer-12-4-x86.x86_64.run ... DKMS part of installation failed. Please refer to /usr/share/ati/fglrx-install.log for details When checking this log file, I get: Uninstalling any previously installed drivers. Creating symlink /var/lib/dkms/fglrx/8.961/source -> /usr/src/fglrx-8.961 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... cd /var/lib/dkms/fglrx/8.961/build; sh make.sh --nohints --uname_r=3.2.0-24-generic-pae --norootcheck......(bad exit status: 1) [Error] Kernel Module : Failed to build fglrx-8.961 with DKMS [Error] Kernel Module : Removing fglrx-8.961 from DKMS Deleting module version: 8.961 completely from the DKMS tree. Done. [Reboot] Kernel Module : update-initramfs When checking with fglrxinfo, I get: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13

  Read the article

• Unable to install mysql in ubuntu

  - by Anand

  I purged my existing mysql-server from ubuntu and re-installed the same. This was due there was an upgrade from my ubuntu and I was unable to start my sql-server. After cleaned up and taking backup of my data , I re-insalled mysql. During installaion I received following message popup. Unable to set password for the MySQL "root" user An error occurred while setting the password for the MySQL administrative user. This may have happened because the account already has a password, or because of a communication problem with the MySQL server. You should check the account's password after the package installation. Please read the /usr/share/doc/mysql-server-5.5/README.Debian file for more information. ¦ ¦ After the installation was failed, following error were received. 121109 20:36:18 InnoDB: Initializing buffer pool, size = 128.0M 121109 20:36:18 InnoDB: Completed initialization of buffer pool 121109 20:36:18 InnoDB: highest supported file format is Barracuda. 121109 20:36:18 InnoDB: Waiting for the background threads to start 121109 20:36:19 InnoDB: 1.1.8 started; log sequence number 2395841 ERROR: 130 Incorrect file format 'user' 121109 20:36:19 [ERROR] Aborting 121109 20:36:19 InnoDB: Starting shutdown... 121109 20:36:20 InnoDB: Shutdown completed; log sequence number 2395841 121109 20:36:20 [Note] /usr/sbin/mysqld: Shutdown complete start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• Oracle VM 3: New Patch Set! (or Mega Millions winner?...you decide!..)

  - by Adam Hawley

  Today, my favorite number is 14736185 (despite the fact that it did not win me $249million in the MegaMillions lottery...or did it?)!  Why?  Because it is our latest patch release and it is chock-full of good stuff for the Oracle VM 3.0 user.  Oracle VM support customers can find it on My Oracle Support as patch number 14736185.   This can be installed on Oracle VM 3.0.x systems as an incremental patch on top of 3.0.3, so if you previously ran 3.0.3 GA or updated to 3.0.3 patch 1 ( build 150) this will just apply on top.  We're recommending you update to this patch set at your earliest convenience.  For more details, see below but also see Wim Coekaert's blog with related info here. Oracle VM Manager Update Instructions Oracle VM Manager 3.0.2 or 3.0.3 can be upgraded to this Oracle VM Manager 3.0.3 patch update. Unzip the patch file on the server running Oracle VM Manager and execute the runUpgrader.sh script. # ./runUpgrader.sh Please refer to Oracle VM Installation and Upgrade Guide for details. Upgrade Oracle VM Servers It's highly recommended to update Oracle VM Server 3.0.3 with the latest patch update. Please review Oracle VM 3.0.3 User Guide http://docs.oracle.com/cd/E26996_01/e18549/BABDDEGC.html for specific instructions how to use Yum repository to perform the server update. To receive notification on the software update delivered to Oracle Unbreakable Linux Network (ULN, http://linux.oracle.com) for Oracle VM, you can sign up here http://oss.oracle.com/mailman/listinfo/oraclevm-errata.  Additional Information Oracle VM documentation is available on the Oracle Technology Network (OTN):http://www.oracle.com/technetwork/server-storage/vm/documentation/index.html  Please refer to the Oracle VM 3.0.3 Release Notes for a list of features and known issues. For the latest information, best practices white papers and webinars, please visit http://oracle.com/virtualization

  Read the article

• Single Responsibility Principle - How Can I Avoid Code Fragmentation?

  - by Dean Chalk

  I'm working on a team where the team leader is a virulent advocate of SOLID development principles. However, he lacks a lot of experience in getting complex software out of the door. We have a situation where he has applied SRP to what was already quite a complex code base, which has now become very highly fragmented and difficult to understand and debug. We now have a problem not only with code fragmentation, but also encapsulation, as methods within a class that may have been private or protected have been judged to represent a 'reason to change' and have been extracted to public or internal classes and interfaces which is not in keeping with the encapsulation goals of the application. We have some class constructors which take over 20 interface parameters, so our IoC registration and resolution is becoming a monster in its own right. I want to know if there is any 'refactor away from SRP' approach we could use to help fix some of these issues. I have read that it doesn't violate SOLID if I create a number of empty courser-grained classes that 'wrap' a number of closely related classes to provide a single-point of access to the sum of their functionality (i.e. mimicking a less overly SRP'd class implementation). Apart from that, I cannot think of a solution which will allow us to pragmatically continue with our development efforts, while keeping everyone happy. Any suggestions ?

  Read the article

• Good ruby book with exercises? [closed]

  - by watabou

  I find that I learn the best with a book that has a number of exercises at the end of each chapters. A great example of this is C++ Primer Plus by Stephen Prata or Scientific Programming with Python or the Horstmann Java books. All of those books have a number of programming exercises at the end tailored to that specific chapter. I love the styles of those book and was wondering if there is anything similar for Ruby. I've extensively searched google for this and people have been suggesting different stuff like different websites like Ruby Koans and LRTHW but honestly, I've tried those and they aren't for me. I taught myself Python with the the Hard Way book and to be honest, it's not for me. Now, forgive me if I'm blunt but does anyone have a Ruby programming BOOK (i.e. not a website), that has EXERCISES in it? I do NOT want a website, unless the book is only or is freely available online by the author, similar to the Hard Way books. I would say that I'm a intermediate level programmer with only some Ruby experience but if you know of a beginner book on Ruby, that is fine too. Thanks in advance, I would really really appreciate the help.

  Read the article

• Microsoft signed driver appears as publisher not verfied

  - by Priyanka Gupta

  Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OurCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >