Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 215/1036 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • apt-get update: 503 Service Unavailable

    - by Johan Barelds
    I do get the following error message(s) when running apt-get update: Err http://nl.archive.ubuntu.com precise-backports/multiverse i386 Packages 503 Service Unavailable The server is not behing a proxy, but there is a firewall, I suspect that the firewall is causing me troubles (transparant proxy?). What kind of checks can I perform to be sure it is the firewall and not something else? Which specific ports should I check in which way to get conclusive evidence?

    Read the article

  • What would cause SSD to become not detectable?

    - by Balthazar
    I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

    Read the article

  • Upgrade from 11.04 to 12.04 failed - unable to login

    - by Tobias M.
    Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

    Read the article

  • Backup files with rsync: error 23

    - by maria
    Hi I'm trying to make a backup of my /home to transfer all data from one computer to another. I wanted to save the backup on the same computer and than transfere it to another one. For safety reasons, I'm trying to learn how does it work on the computer without a lot of data (the new one) to be sure I won't delete something instead of copying it. I've run in terminal: sudo rsync -avz /home/maria /home/guest/backup and I had as the result: sent 58797801 bytes received 23050 bytes 4705668.08 bytes/sec total size is 100202958 speedup is 1.70 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1060) [sender=3.0.7] I've tried once again, with the same result. I have no idea, which files were not transferred, what makes the whole backup useless for me (I wanted to do it automatically in order not to forget about something and loose it). On both computers I have the same system (Ubuntu 10.04). Rsync version: 3.0.7-1ubuntu1. Thanks for any tips

    Read the article

  • Is there any working, usable video editing software for ubuntu?

    - by matteo
    Is there any decently stable video editing software for Ubuntu, that won't crash at every mouse click and that you can actually use for doing things that you need? (as opposed to for the sake of testing it) I've tried out pitivi and cinelerra but they are completely unstable (they both crash very often) besides having very poorly designed interfaces... Is there any better option or are we still stuck to Windows and Mac OS for even the most basic (but real-life) video editing? Even something as basic as Avidemux would be fine in many situations (not all) if only it worked (i.e. if not rendered completely useless by its bugs).

    Read the article

  • Only MPV format available in HandBrake

    - by Steve Ellis
    I am running Ubuntu 14.04 LTS 32 bit. I have installed HandBrake rev5474 (i686), which I believe is the latest, and the Ubuntu Restricted Extras. I am able to play DVDs via VLC but when it comes to ripping them, so that I can back them up to my Twonky media server, I have issues. I launch HandBrake and find that the only format available for me to select is MPV. When I used to run Handbrake on this machine while I was running Ubuntu 13.10 and lower I had no issues and **lots of formats (including MP4 which is what I'm really after) but since reformating and installing 14.04 I've had this issue. Any help would be much appreciated.

    Read the article

  • Recommended Method to Watch Amazon Prime using Ubuntu 14.04 LTS

    - by Kurt Sanger
    I realize that Hal is no longer in the Ubuntu Software Center for Ubuntu 14.04 and it is only available from a third party at this time. But I would like to know what Ubuntu's plans are for integrating DRM into Linux? Especially with Amazon's integration into the search tool, one would hope that they would make it easier for their Amazon Prime customers to watch Instant Videos. Is the repository for getting Hal for 13.10 safe for use? What will that break if I install it onto 14.04? Or do we need to find another OS that has DRM built into it? If Hal is okay to add to the OS using a third party repo, then why doesn't Ubuntu Software Center support it too? I imagine that Amazon's contract with the video copyright holders requires that they have some protection on electronically distributed media. I also imagine that getting Amazon to change is much harder than getting a bunch of software engineers to fix Ubuntu. Unless they don't want too. At which point Ubuntu isn't really a complete OS. Very disappointing. In general the ease of use of Ubuntu, the software center, and the large variety of applications was alluring. But breaking DRM wasn't a great idea. Can't wait to see what fails in our next update. Please tell us that there is a plan that is going to work in our future.

    Read the article

  • GParted detects entire disk as UNALLOCATED SPACE + hd0 out of disk

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows. After 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu again but still I get the same hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but since GParted or the Ubuntu installer itself does not recognize my partitions and shows the entire disk as unallocated space, I decided not to continue. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk! UPDATE I think I might know the problem. The total sectors of sda is 625142448 but the extended partition (sda4) ends at 625153409. Now, my question is, how do I fix this or modify the extended partition (sda4) to matched the total number of sectors? Anyone, please??? UPDATE I was able to fix the unallocated space issue with the help of Rod Smith's tool called fixparts I am now able to view my partitions via GParted in LiveUSB. But the error: hd0 out of disk. Press any key to continue... still persists on reboot. I still can't boot into Ubuntu. Can someone help me please???

    Read the article

  • Apache2 Syntex, cant acces 000-default

    - by enrique2334
    I have been using Apache2 and webmin with my raspberry pi. after a restart and reinstalations apache wont start. > sudo /etc/init.d/apache2 restart apache2: Syntax error on line 268 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/000-default: No such file or directory Action 'configtest' failed. The Apache error log may have more information. failed! The file 000-default is there and unopenable permisions to root-root My apache2.conf file looks like this (bottom half) # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel debug # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include list of ports to listen on and which to use for name based vhosts Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see the comments above for details. # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/ <VirtualHost *:80> DocumentRoot /var/www <Directory /var/www> allow from all Options +Indexes </Directory> ServerName IMASERVER </VirtualHost> does anyone know what the cause of this?

    Read the article

  • Wine installation on 12.04 LTS

    - by Dale
    Installed wine from the Software Center and kept getting errors when trying to load windows programs. Uninstalled and did the apt-get installation of the latest version (1.5.7) Ran Wine configuration and get a "Failed to connect to the mount manager, the drive configuration cannot be edited" If i try to install a program it immediately goes to "Internal error" Any Ideas or possible solutions would be appreciated. Thanks Dale Ran winecfg and got the following: getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked) err:process:start_wineboot failed to start wineboot, err 1359 p11-kit: couldn't load module: /usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: /usr/lib/i386-linux-gnu/pkcs11/gnome-keyring-pkcs11.so: cannot open shared object file: No such file or directory getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked) err:winecfg:WinMain failed to restart 64-bit L"C:\windows\system32\winecfg.exe", err 1359 getting server_pid from lock 2457 wine: cannot get pid from lock (lock isn't locked)

    Read the article

  • 11.10 AMD64 alternate installer has broken packages?

    - by Ibrahim
    I'm installing Ubuntu 11.10 from the alternate install ISO because I need to use LVM. Unfortunately, at some point the installer fails because it can't install libpurple0 and ubuntu-desktop because they depend on libsasl2-modules but it's not installable somehow. It also has the same error for xserver-xorg-video-all but I think I could probably live without that one. Kind of annoying that this is broken, I'm guessing maybe if I had internet it would work but right now I'm on a campus network with a captive portal so I can't actually get a network connection without using a browser to log in. Just thought someone should know or maybe I'm doing something wrong. I'm going to try installing 11.04 alternate and then upgrading I guess.

    Read the article

  • Broadband internet connection problem on Ubuntu 11.10

    - by zahidul hossain
    I am using a broadband internet connection from a local ISP. I installed Ubuntu 11.10 yesterday but I could not configure my internet connection like I did on 10.04 before. On 10.04, it was easy to configure and connect to internet. Generally, I used DSL settings to configure my net. There I enter my user name, my connection's name and password to connect with net. But now in 11.10 it's not working. What can I do to connect it perfectly?

    Read the article

  • Ubuntu install doesn't recognize kingston SSDnow sv 200 90g

    - by Quique Garcia
    I'm trying install Ubuntu 12.04 on my new Kingston SSD Now SVP200S3/90G, but the installer doesn't list this disk to be installed. However gparted let me do any partitioning operation correctly. I've tryed with Ubuntu Studio and Ubuntu Desktop on different machines: Lenovo ThinkPad T400, Lenovo ThinkStation C20, MoBo ASUS Crosshair V formula. SATA controller in all machines has been set to AHCI and IDE operation and different SATA ports with no luck. The firmware on the SSD has been updated to V.503xxx (latest on kingston page) Any help is appreciated, regards!

    Read the article

  • Function inside .profile results in no log-in

    - by bioShark
    I've created a custom function in my .profile, and I've added right at the bottom, after my custom aliases : # custom functions function eclipse-gtk { cd ~/development/eclipse-juno ./eclipse_wb.sh & cd - } The function starts a custom version of my eclipse. After I've added it, because I didn't wanted to log-out/log-in, I've reloaded my profile with the command: . ~/.profile and then I've tested my function by calling eclipse-gtk and it worked without any issue. Today when I booted, I couldn't log in. After providing my password, in a few seconds I was back at the log-in screen. Dropping to command line using CTR + ALT + F1, I've commented out the function in my .profile and the log-in was possible without any issue. My question is, what did I do wrong when I wrote the function? And if there is something wrong, why did it work yesterday after reloading the profile. Thanks in advance. Using: Ubuntu 12.04

    Read the article

  • What is the best free program to burn DVD movies from DVD movie files that are present on the hard drive the way ImgBurn does it in Windows?

    - by cipricus
    Evaluating burning programs is difficult: it takes more time, while errors are very unpleasant. I have looked at AcetoneISO, Brasero, and K3B (which many recommend) but they seem more limited than Nero, CDBurnXP and especially ImgBurn from Windows. They all seem to work (did not tested them fully myself) but at a more basic level (create ISO, burn them, etc.). When it comes to something like creating a DVD movie disk from DVD movie files present on the hard drive, it seems to me that I would have to create the ISO first and then burn it, which involves using more hard drive space and more time. Looking in the Windows direction, there is a Nero for Linux. It costs money. ImgBurn is said to work well in Wine, but as yet I have not tested it enough. What other options are there?

    Read the article

  • Does ssh key need to be named id_rsa?

    - by dustyprogrammer
    I have come across this problem a couple of times when creating build servers with keyed authentication. I was wondering if anyone else has experience this. I have a couple of keys for my current user that may connect to different machines. Let say machine1 and machine2. I have pasted my public key into their respective authorized_keys file. The first one I have named the first key id_rsa and the second key bender. When I try to connect to bender I get the following output with my verbose ssh connection debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/bozo/.ssh/.ssh/identity debug1: Trying private key: /home/bozo/.ssh/.ssh/id_rsa debug1: Trying private key: /home/bozo/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). It only offers the id_rsa key, as you can see above. Is this correct? If so why? How do I get it to offer more keys? I know it is a problem I see intermittently, because I at home I have multiple keys without much trouble. I would also appreciate a overview on how the pub and private keys interact with the client and server. I thought I had a pretty decent idea, but apparently I am missing something. Please and thank you.

    Read the article

  • What's wrong with my grub configuration?

    - by Daniel Medrano
    I have one hard drive with 2 partitions. I had Windows XP and Windows Seven installed. I've deleted Seven partition and installed Ubuntu 11.10 on it. But when I turn on the computer and the grub menu appears on the screen, I can only see my ubuntu installations and a windows 7 loader. I've already got installed windows XP on another partition, but it doesn't boot. If I want to use Ubuntu alongside Windows XP, ¿how can I fix the problem?

    Read the article

  • Question about wifi connection files/certificates

    - by I_am_that_man-with-hair
    Here is the output i get when i run my school's wifi .py file for secure login. I "python SecureW2_JoinNow.py" I've emailed them about it, but wanted to take a shot and post here, could be on my end. I can't make sense of this error, although the last line makes me think it's on my end. Fresh install, so maybe that is it... Traceback (most recent call last): File "SecureW2_JoinNow.py", line 252, in <module> main() File "SecureW2_JoinNow.py", line 248, in main nm.connect() File "SecureW2_JoinNow.py", line 196, in connect wireless_device = nm_iface.GetDeviceByIpIface('wlan0') File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 70, in __call__ return self._proxy_method(*args, **keywords) File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 145, in __call__ **keywords) File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.NetworkManager.UnknownDevice: No device found for the requested iface.

    Read the article

  • Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

    - by Nic
    I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

    Read the article

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • Ubuntu 12.10 Wine Crash Error Help

    - by Hao
    I'm trying to get wine to work for Hawken. I used winetricks and installed all the necessary components. Wine works fine with other games I have installed but when I try to run Hawken it crashes while loading with the following error: fixme:iphlpapi:CancelIPChangeNotify (overlapped 0xf2afb8): stub I'm new to Ubuntu so I have no idea how to fix this. Any help would be much appreciated. *Update: I've done some backtracking and it seems that this error is caused by the launcher not wine itself.

    Read the article

  • SSH'ing to my machine attaches an existing screen session and detaching it ends my SSH session

    - by jsplaine
    ssh'ing to my Ubuntu machine automatically attaches an existing screen session and detaching ends my ssh session What I want is to be able to ssh to my Ubuntu machine without automatically attaching to the screen session on that machine. Or at least, I should be able to to detach from that screen session w/o ending my ssh session .. right? Doesn't seem to work. This so that I can attempt to run firefox --display <whichever one is being forwarded to my ssh session>, so that I can debug a website that the remote Ubuntu machine is running (via localhost). Best case scenario is that I could just remote-desktop to my Ubuntu machine. But it's not set up to allow remote-desktop, and I see no way to set it up remotely via shell/ssh. Also, it sounds like you need a static IP in order to remote desktop to an Ubuntu machine (so I keep reading).

    Read the article

  • Remapping Shift Selection in Gnome Terminal

    - by Gowie47
    Hey so I was hoping somebody could help me out in finding a way to get shift-selection working in gnome-terminal on Ubuntu 11.10. I found the question/bug report below but neither seem to have a solution. I use Emacs for development and being able to select my current line with shift-ctrl-a/e is something I find myself trying to do every couple of minutes. I use 10.04 at work and this is possible so I am not sure what has changed. If it matters I am using Gnome 3 Shell and I use bashish to style my terminal. Thanks in advance! https://bugs.launchpad.net/ubuntu/+source/vte/+bug/546021 http://askubuntu.com/questions/31991/using-the-shift-key-in-terminal

    Read the article

  • How can I get something like Nautilus's "spatial" behaviour in 11.10 and later?

    - by Dylan McCall
    Until recently, Nautilus had an optional "spatial" mode as an alternative to its usual browser mode. Users could enable it by opening Nautilus's preferences and selecting "Open each folder in its own window." Choosing this option resulted in a stripped down interface, and folders would always open in the same place on the screen. It looked something like this: That checkbox is still there, but it doesn't do the same thing: while every folder opens in a new window, those windows are all the same size and positioned the same way. Nautilus doesn't restore the size and position of each folder, which is what spatial mode was all about. This difference really shows if someone opens a folder in a new window, and then opens the same folder again. Nautilus will create another window instead of focusing the existing window. I help someone who is currently using Ubuntu 10.04, and he will be upgrading to 12.04 in the future. He is very comfortable with Nautilus's spatial behaviour and I think he would be disappointed to lose it. Is there an alternative file manager, or perhaps some less obvious option, that will give him an interface similar to the one he is comfortable with?

    Read the article

  • Ubuntu 12.04 won't load - hangs at Busybox v1.18.5 / initramfs

    - by Marty
    I want to start by saying that I am very new with Linux (about 1 month using it). I have had no problems up until now. I am running Ubuntu 12.04 from a Toshiba laptop with 250 GB hard drive and 3 GB of ram. Everything worked fine yesterday. The only changes I made was was that I downloaded Banshee to try as a replacement for Rhythmbox and did a few recommended updates. This morning I tried to boot and it took a long time and I finally got this error: mount: mounting /dev/disk/by-uuid/02bc41cc-1e21-4700-a179-be2805a658c4 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.18. (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands (initramfs) I'm not sure what to do beyond this point. I have read around on here and haven't found the help I need. I did try to boot it from the Live CD. I can boot up to the Try Ubuntu/Install Ubuntu screen. When I go through the Try Ubuntu selection I can't access my hard disk. When I clicked on it I got this error: Unable to mount 247 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda/1, missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg|tail or so. I tried dmesg|tail and saw a string of values but nothing that looked helpful. I have also tried to boot from the GRUB screen as recovery mode and previous Linux version but they didn't work either. I tried to load Windows Recovery Environment (loader) (on /dev/sdc3) and got this message: error: no such device: 268057B1805785E9 error: hd1 cannot get C/H/S values I had saw somewhere that I could fix this with the Live CD but my knowledge isn't good enough to try. I tried something with Gpart that I had read, but the system told me that I didn't have Gpart. Could someone please explain to me what I need to do and/or haven't tried yet. Thanks so much!

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >