Search Results

Search found 7595 results on 304 pages for 'dev jadeja'.

Page 215/304 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222 | Next Page >

No boot or grub file after using ls command

- by Poke Moke

I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

Read the article
How does a game developer get feedback from gamers (not developers) or start a forum community without paying for advertising or hiring Q&A teams?

- by Carter81

I am familiar with a lot of game developer forums, but I'd assume this is much less likely to attract more casual commentators. I also fear that feedback from a gamer's perspective would often be tainted by their game dev perspective. For example, if I were making a RTS game and wanted to get feedback from "The RTS gamers" where would I go? Is there a general idea of what type of website or forum to go to? Do you go to specific game websites, to try to "steal" attention? Would this not equate to spam or inappropriate posting? What is considered appropriate and inappropriate? I am not asking for specifics. I am asking how one "starts a community", or how one "gets feedback from gamers" without resorting to spamming forums or 'advertising' just to see what sticks. What TYPE OF PLACE does one go? Are there already sites designed for this purpose? I tried going to what was once a very popular forum for feedback from what I believed was a niche hardcore group of gamers in the genre, but its popularity seemed to have died significantly; Leaving only trolls and very young teenagers. The resulting feedback was quite disappointing, mainly for how little feedback it resulted. Many years ago, feedback would flood in by the hundreds so quickly. Without this website, I am at a loss as to where to go to see what people think of ideas, gather feedback from a gamer's perspective (not a developer's perspective), or where to pull from to start my own site's forum. I am out of ideas of what to do, short of going to various game forums to post in the off-topic sections there.

Read the article
Ubuntu 12.04 Faster boot, Hibernate & other questions

- by Samarth Shukla

I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

Read the article
New Dell Vostro 3550 will not boot into Live CD

- by rich97

I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

Read the article
Developing momentum on open source projects

- by sashang

Hi I've been struggling to develop momentum contributing to open source projects. I have in the past tried with gcc and contributed a fix to libstdc++ but it was a once off and even though I spent months in my spare time on the dev mailing list and reading through things I just never seemed to develop any momentum with the code. Eventually I unsubscribed and got my free time back and uncluttered my mailbox. Like a lot of people I have some little open source defunct projects lying around on the net, but they're not large and I'm the only contributor. At the moment I'm more interested in contributing to a large open source project and want to know how people got started because I find it difficult while working full time to develop any momentum with the code base. Other more regular contributors, who are on the project full-time, are able to make changes at will and as result enter that positive feedback cycle where they understand the code and also know where it's heading. It makes the barrier to entry higher for those that come along later. My questions are to people who actively contribute to large opensource projects, like the Linux kernel, or gcc or clang/llvm or anything else with say a developer head count of more than 10. How did you get started? Was there a large chunk of time in your life that you just could dedicate to working on the project? I know in Linus's case he had a chunk of time (6 months) to get it started. What barriers to entry did you encounter? Can you describe the initial stages of the time spent with the project, from when you had little understanding of the code to when you understood enough to commit regularly. Thanks

Read the article
Trying to recover deleted Ubuntu partition

- by user110984

I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

Read the article
design in agile process

- by ying

Recently I had an interview with dev team in a company. The team uses agile + TDD. The code exercise implements a video rental store which generates statement to calc total rental fee for each type of video (new release, children, etc) for a customer. The existing code use object like: Statement to generate statement and calc fee where big switch statement sits to use enum to determine how to calc rental fee customer holds a list of rentals movie base class and derived class for each type of movie (NEW, CHILDREN, ACTION, etc) The code originally doesn't compile as the owner was assumed to be hit by a bus. So here is what I did: outlined the improvement over object model to have better responsibility for each class. use strategy pattern to replace switch statement and weave them in config But the team says it's waste of time because there is no requirement for it and UAT test suite works and is the only guideline goes into architecture decision. The underlying story is just to get pricing feature out and not saying anything about how to do it. So the discussion is focused on why should time be spent on refactor the switch statement. In my understanding, agile methodology doesn't mean zero design upfront and such code smell should be avoided at the beginning. Also any unit/UAT test suite won't detect such code smell, otherwise sonar, findbugs won't exist. Here I want to ask: is there such a thing called agile design in the agile methodology? Just like agile documentation. how to define agile design upfront? how to know enough is enough? In my understanding, ballpark architecture and data contract among components should be defined before/when starting project, not the details. Am I right? anyone can explain what the team is really looking for in this kind of setup? is it design aspect or agile aspect? how to implement minimum viable product concept in the agile process in the real world project? Is it must that you feel embarrassed to be MVP?

Read the article
Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

- by ubunsteve

I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

Read the article
How to install SpatiaLite 3 on 12.04

- by Terra

1) sudo apt-get install libsqlite3-dev libgeos-dev 2) libspatialite-3.0.0-stable$ ./configure Result: configure: error: cannot find proj_api.h, bailing out checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for stdlib.h... (cached) yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for inttypes.h... (cached) yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdint.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking sqlite3.h usability... yes checking sqlite3.h presence... yes checking for sqlite3.h... yes checking sqlite3ext.h usability... yes checking sqlite3ext.h presence... yes checking for sqlite3ext.h... yes checking for g++... no checking for c++... no checking for gpp... no checking for aCC... no checking for CC... no checking for cxx... no checking for cc++... no checking for cl.exe... no checking for FCC... no checking for KCC... no checking for RCC... no checking for xlC_r... no checking for xlC... no checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for an ANSI C-conforming const... yes checking for off_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for working volatile... yes checking whether lstat correctly handles trailing slash... yes checking whether lstat accepts an empty string... no checking whether lstat correctly handles trailing slash... (cached) yes checking for working memcmp... yes checking whether stat accepts an empty string... no checking for strftime... yes checking for memset... yes checking for sqrt... no checking for strcasecmp... yes checking for strerror... yes checking for strncasecmp... yes checking for strstr... yes checking for fdatasync... yes checking for ftruncate... yes checking for getcwd... yes checking for gettimeofday... yes checking for localtime_r... yes checking for memmove... yes checking for strerror... (cached) yes checking for sqlite3_prepare_v2 in -lsqlite3... yes checking for sqlite3_rtree_geometry_callback in -lsqlite3... yes checking proj_api.h usability... no checking proj_api.h presence... no checking for proj_api.h... no configure: error: cannot find proj_api.h, bailing out

Read the article
nvidia: switching dvi socket

- by lurscher

I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

Read the article
Two graphical entities, smooth blending between them (e.g. asphalt and grass)

- by Gabriel Conrad

Supposedly in a scenario there are, among other things, a tarmac strip and a meadow. The tarmac has an asphalt texture and its model is a triangle strip long that might bifurcate at some point into other tinier strips, and suppose that the meadow is covered with grass. What can be done to make the two graphical entities seem less cut out from a photo and just pasted one on top of the other at the edges? To better understand the problem, picture a strip of asphalt and a plane covered with grass. The grass texture should also "enter" the tarmac strip a little bit at the edges (i.e. feathering effect). My ideas involve two approaches: put two textures on the tarmac entity, but that involves a serious restriction in how the strip is modeled and its texture coordinates are mapped or try and apply a post-processing filter that mimics a bloom effect where "grass" is used instead of light. This could be a terrible failure to achieve correct results. So, is there a better or at least a more obvious way that's widely used in the game dev industry?

Read the article
Can't mount USB devices, shut down etc. as a user

- by Alok

I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

Read the article
What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

- by user12620111

A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif bondeth0 10.129.184.0 global public bondib0 192.168.10.0 global cluster_interconnect ipmpapp0 192.168.30.0 global public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static static ok 192.168.10.1/24 bondib1/v4static static ok 192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2 # grep 192.168.10 /etc/hosts 192.168.10.1 node1-priv1.us.oracle.com node1-priv1 192.168.10.2 node1-priv2.us.oracle.com node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP GROUPNAME STATE FDT INTERFACES ipmpapp0 ipmpapp0 ok -- ipmpapp_0 (ipmpapp_1) bondeth0 bondeth0 degraded -- net2 [net5] bondib1 bondib1 ok -- bondib1_0 (bondib1_1) bondib0 bondib0 ok -- bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK CLASS MTU STATE OVER bondib0_0 part 65520 up net21 bondib0_1 part 65520 up net22 bondib1_0 part 65520 up net24 bondib1_1 part 65520 up net23 net24 is IB Partition FFFF # dladm show-ib LINK HCAGUID PORTGUID PORT STATE PKEYS net24 21280001A1868A 21280001A1868C 2 up FFFF net22 21280001CEBBDE 21280001CEBBE0 2 up FFFF,8503 net23 21280001A1868A 21280001A1868B 1 up FFFF,8503 net21 21280001CEBBDE 21280001CEBBDF 1 up FFFF On Express Module 9 port 2: # dladm show-phys -L LINK DEVICE LOC net21 ibp4 PCI-EM1/PORT1 net22 ibp5 PCI-EM1/PORT2 net23 ibp6 PCI-EM9/PORT1 net24 ibp7 PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0 192.168.10.2 U 16 6551834 bondib1 192.168.10.0 192.168.10.1 U 9 5708924 bondib0 There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real 4.3 user 0.0 sys 0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real 13.3 user 0.0 sys 0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured 49 node1-priv1.us.oracle.com 24 node2-priv1.us.oracle.com 14 node3-priv1.us.oracle.com 13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured 100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured 51 node3-priv1.us.oracle.com 49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

Read the article
OpenJDK6 At a Glance

- by user9158633

OpenJDK6 Quick Links Project: Home Page | How to Contribute to OpenJdk | Java SE 6 Spec Code: Source Bundle Download | Mercurial Repositories: [.] , corba, hotspot, jaxp, jaxws, jdk, langtools Mailing List: [email protected] | Mail Archive | How to Subscribe Bloggers: Joe Darcy (the founder and the first Release Manager) | Kelly O'Hair (current Release Manager) Blog Posts: All Joe's OpenJDK 6 Posts | Joe's FOSDEM Presentation Related Projects: IcedTea6 | OpenJDK 7 Important Notice: • Security fixes from Oracle will continue through EOL of OpenJDK 6 train • EOL of OpenJDK 6 train will occur no sooner than July 2012 (one year after JDK 7 ships) OpenJDK 6 Releases Releases: Release Process | Release Tools/Scripts Build Numbers Release Engineer Release Notes Test Results Change List B01 - B22 Joe Darcy B22 Blog, src bundles B22 B22 B23 Kelly O'Hair B23 Blog, src bundles B23 B23 B24, and later Lana Steuck B24 Blog, src bundles B24 B24

Read the article
Switching DVI socket

- by lurscher

I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

Read the article
Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

- by Iohannes

After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

Read the article
The Mac Tax

- by Robert May

One of our users was having difficulties with their mac and using some web software. I decided to go peruse the landscape and see how much of a premium people were paying for their macs. I priced out a Dell and a Mac from their websites. I tried to get them as close to the same configuration, from a hardware standpoint, as I could. I found the following: Apple Macbook Pro Dell XPS 17 There are several important differences in the hardware: The mac doesn’t have a blueray player, but the dell does. The mac has a slightly slower processor. The mac claims to have a better battery, but doesn’t list the specifics, so there’s no way to tell. The mac doesn’t list the video card stats, so there’s no way to tell how comparable they are, but they’re probably close. The mac doesn’t come with any additional software. No iWorks, iPhoto, etc. They were left to their default of None, so arguably, the Dell is more functional out of the box. Other than changing the hardware specs to be close, all other configuration options were left at their default. So riddle me this, Batman: Why do people buy Macs? I have several dev buddies that own them, but I can’t justify the cost. First, most of them load bootcamp and/or parallels at extra cost to run windows 7 and windows apps. The hardware isn’t as good. The price is almost twice as expensive. How do you justify the premium price? Technorati Tags: General

Read the article
How to fix the boot set up?

- by Chris

I got two OSes in my PC, Ubuntu and Windows 7. Until yesterday Windows 7 was on top of my dual-boot menu list, but I wanted to change it, so I went inside Windows configurations and put Ubuntu first, but I also set the time to 0 because I thought I could access Windows through Grub. But what happens is that after I upgraded Ubuntu to 11.10, that screen with boot options don't show Windows 7 anymore. I went online searching for a solution to my problem, most of them told me to configure some Grub options and others to use programs to do it. I've done them all and still can't access Windows 7. Just in case my problem is not clear yet, this is how was my boot order before I messed it all up: Windows 7 Ubuntu with a time of 10 secs to choose between both. This is how I wanted it to be: Ubuntu Windows 7 with 0 time to choose, but, inside Ubuntu I could access Windows through that Grub screen. But this is what happens: Ubuntu Windows 7 0 time, so it don't let me choose anything and jumps inside Ubuntu then inside Ubuntu grub doesn't show up anymore (black screen) and it starts Ubuntu normally. I tried to fix this many times from different ways inside Ubuntu but nothing worked, also when I try do something and then upgrade my grub with sudo upgrade-grub it shows this message: Generating grub.cfg ... Found Windows 7 (loader) on /dev/sda1 Skipping Windows 7 (loader) on Wubi system Found linux image: /boot/vmlinuz-3.0.0-12-generic Found initrd image: /boot/initrd.img-3.0.0-12-generic Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic done Thats why in the title I said it could probably be my WUBI messing all up. Anyone heave a solution for this? Do you need more information? I have a netbook so I cannot use the Windows Repair CD.

Read the article
Where to look for challenging jobs with a relaxed atmosphere?

- by RBTree

I'm a dev at one of the big-name tech companies. I like the job for many reasons: I do interesting work on a cool product I solve challenging problems and use a lot of high-level skills (quantitative, creative, writing, presenting) It pays well The problem is that I feel I need a more relaxed atmosphere (shorter hours, less performance pressure, and more flexibility), in order to free up time for other pursuits and reduce stress. The ideal would be a job that's around 30-35 hours a week, where there is flexibility to work more or less in a given week. Can anyone suggest where to look for a job like this, where I wouldn't have to sacrifice too much on the above points? (Obviously I would have to sacrifice pay.) My employer does not generally offer part-time employment. The closest thing I can think of is when I did summer internships at my university's CS department. The work was very intellectually challenging, but if I needed to go home a couple hours early or get flexibility on a due date, nobody batted an eyelash. However, I'd like to find out if there are alternatives to academia since from what I've seen the pay there is a gigantic drop from what I'm currently making. I've done freelance development before, but I do like that as an employee of a large company I have a lot of things taken care of for me (e.g. benefits and guaranteed stable employment).

Read the article
Pandaboard crash on startup or freeze after minutes

- by Meach

I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

Read the article
Dual boot on Hp Envy Ultrabook

- by phodu_insaan

I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

Read the article
Web development and tips for building a website and the advantages of using HTML 5 in the site

- by Siddarth

I am trying to make a website for my college, and the program starts from jan 13 and we get 15 days of time to develop a running site. The best site will become the college site. I am participating, for all these days i used to participate in C and C++ contests and also won a few contests, now i am really into web dev for the last 2 months. I knew HTML long ago recently i brushed up on it and learnt javascript from "javascript and jquery the missing manual"(sorry for not adding the link) and recently bought "PHP and MySQL web development" and I am going on fine with it, but still a lot of pages to cover in that book. After this what do i need to know ajax is one language to concentrate on, what else do i need to do to make this project up and running. Can someone let me know the tricks of this trade and complete information to build a site like this. Right now i am good with javascript HTML and CSS and thats it, what else I am studying HTML5 and CSS3 its pretty fast and neat. The info on site is a college website which includes students profiles where the have to register their info with college id number and pretty much thats it. Think of it as a college site + a social networking site for students, where they can upload there pics and videos pdf books etc.

Read the article
My 2012 Professional Development Goals

- by kerry

Once again I am going to declare some professional goals for my upcoming year. Convert my blog to Jekyll hosted on github – I am tired of wordpress, tired of spam, and would like to try something new. I have already started on this. Just need to finish it up. Launch my GWT / Google App Engine application – I am currently developing a GWT application to be deployed to Google App Engine. Do another presentation at the user group – At least a few lightning talks. I have a few ideas. Attend a tech conference – Dev Nexus is the likely target Post more often – I did 10 posts last year, would like to maybe double that next year (including this one) Attend a user group meeting outside of Nashville JUG – A rollover from last year, I will probably be regularly attend the Interactive Developers meeting Study another language – I have been thinking about looking in to Dart or perhaps Go Launch an Android app – Another holdover from last year I am thinking of doing a small app having to do with managing the silent state of the phone

Read the article
Offshoring: does it ever work?

- by DanSingerman

I know there has been a fair amount of discussion on here about outsourcing/offshoring, and the general opinion seems to be that at best it is difficult, and at worst it fails. I have direct experience of offshoring myself; a previous company where I was a dev manager wanted to send some development offshore, and we ran a pilot scheme to see how well it would work. Of course it was a complete failure, although it is not completely clear to me whether this was down to the offshore devs being less talented, the process, or other factors (no doubt it was really a combination). I can see as a business how offshoring looks attractive (much lower day rate), but as far as I can see, the only way it could possibly work is if you do exceptionally detailed design up front, with incredibly detailed specifications; and by the time you have invested in producing that, you have probably spent as nearly as much as if you had written the actual code locally (which I think is an instance of No Silver Bullet) So, what I want to know is, does anyone here have any experience of offshoring actually working ever? Especially if there are any success stories of it working in a semi-agile way? I know there are developers here from all over the World; has anyone worked on an offshore project they consider successful?

Read the article
virtual box upgrade

- by Husni

I did upgrade virtualbox from 4.1 to 4.2 wheneverver I want to load my win xp vdi, it gives me the following error: "Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup' as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary." I ran the suggested step to reinstall the kernel module, and the log file files is as follow: Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. Makefile:181: * Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR= and run Make again. Stop. I still unable to re-run my win virtual XP vdi file. anyone have a clue?

Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222 | Next Page >