Search Results

Search found 48774 results on 1951 pages for 'linux development'.

Page 215/1951 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • What filesystem for an external Harddrive (Linux/Mac/Windows)

    - by Marcel
    What Filesystem should I use for an external USB harddrive (500GB), with possibility to share with a Mac and Windows systems, for example at the office. Now it is NTFS but back in the day the NTFS support was not stable under Linux and I think it is not supported on a Mac. I would just use FAT32, but it has 4GB file size limitation, do I overlooked any other option? I looked here: filesystem types for partitions but a Mac is not mentioned. edit Windows is the least important, I am not sure if I need Windows support at all. So what would I use just for Linux and Mac?

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Dual Boot Oracle Solaris 11/11 and Linux (Ubuntu 11.10/grub2)

    - by HartmutStreppel
    After having worked with Open Solaris on my laptop first, then with an upgrade to Oracle Solaris 11 Express, I finally did a fresh install of Oracle Solaris 11/11, when it became available. I am not a big fan of upgrades as I know that I am not the perfect administrator and my system gets spoiled with unclean configurations, outdated packages and wrong settings that cannot be reversed. So I prefer to start from scratch. Especially with Oracle Solaris 11 I wanted to have a system just like a customer would have it in production. The installation was smooth - more or less, if I had only read the documentation a bit better in advance. For a number of reasons I prefer a dual boot system. The most important one is, that especially with mobile devices you often run into network problems. And you have a hard time figuring out where the problem is: in your laptop hardware, in the OS you are running, or really within the network. If you have an alternate OS to boot, you can exclude the OS and your hardware. This makes you feel better. The second OS should be a Linux variant - and for some not so obvious reason I decided to go with the latest Ubuntu release (11.10). It replaced a very old Open Suse installation that had not been booted for a while. I knew that it was probably best to install Ubuntu first and then Oracle Solaris 11, as this would put the right boot information for Oracle Solaris  into the MBR and onto the root partition. But then, how to enable dual boot with the 2 OSes. Searching the web one mainly finds information about dual boot of: Linux and Linux Linux and Windows I do not want to explain which wrong configurations I worked through, but I prefer to explain the final setup, which is extremely simple, and I am wondering why this is not covered as the easiest solution for most dual boot setups. I use chainloader from and to both OS'es, with the only disadvantage that I have to confirm two grub menus each time I want to boot the "other" OS. Still there were some hurdles to jump over: Ubuntu did not like getting its boot blocks being placed on the partition instead of the disk; I must admit that I do not fully understand why. But using the --force option you could get that done Ubuntu needs an active partition; that was easy to achieve grub2 uses a different numbering scheme for the partitions. That is in the docs, if you read them. BTW: The usual disclaimer is valid. There is  no guarantee that what I describe works or works well. Please back up your data carefully before trying any of this. So, Oracle Solaris 11 is installed on the first partition and Ubuntu on the third. With Ubtuntu things initially were a bit more complicated, as I did not know how to boot it. And the live CD did not offer the capability to boot the on-disk image (at least I did not find it). So I booted the live CD, mounted the Ubuntu installation at /mnt and wrote the boot blocks into the partition. This is something that does not seem to be recommended, at least grub-install refrained from doing what I intended. After a bit more research I was bold enough to use the --force option and wrote the boot blocks to /dev/sda3 using grub-install --boot-directory=/mnt/boot --force --no-floppy /dev/sda3 So, I now had a system with the Solaris boot loader in the MBR, Solaris specific boot blocks on the Solaris root partition and Ubuntu specific boot blocks in the Ubuntu partition. I just had to chain them together and I was done. Oracle Solaris 11: I have added the following lines to /rpool/boot/grub/menu.lst (be aware of the /rpool!!!!) title Ubuntu 11.10root (hd0,2)makeactivechainloader +1boot The Ubuntu root file system sits on the third partition (/dev/sda3). Ubuntu: I have added the following lines to /etc/grub.d/40_custom: menuentry "Solaris 11/11" {      set root=(hd0,1)      chainloader +1} Two things need to be mentioned: a) grub2 starts numbering partitions with 1; so my /dev/sda1 is partition 1. b) Oracle Solaris boots without the partition being made active (btw: the command to make a partition active with grub2 is "parttool (hd0,1) boot+", which currently does not work for me). As debugging grub is a bit complicated, I used the grub CLI to perform some tests and also used a tool, that I found on sourceforge.net that was able to prepare a list of all boot loaders on all partitions. This told me that the basic setup was correct. Unfortunately I lost it in the live CD environment. I hope this is helpful for some of the readers.Hartmut

    Read the article

  • La première bêta de Mandriva 2011 est disponible, la distribution Linux va de l'avant

    La première bêta de Mandriva 2011 est disponible, la distribution Linux va de l'avant Mandriva vient de sortir la première bêta de l'édition 2011 de sa distribution Linux. Cette dernière se base sur KDE 4.6.1 et s'articule autour du noyau 2.6.37. Mais l'éditeur a déjà prévenu que la version 38 du kernel serait intégrée au système d'exploitation dès que possible. Cette mouture apporte de nombreuses améliorations, du côté des pilotes graphiques mais aussi du lecteur multimédia Clémentine. Parmi les composants systèmes, on notera : rpm-5.3.9-0.20110303.2, systemd-20, networkmanager-0.8.3.997 et bash 4.2 Enfin, la très récente RC de Firefox 4 est déjà inclue dans le pack logiciels.

    Read the article

  • Is There any GUI Application for Flash Media Live Encoding for Ubuntu or Linux

    - by Dumindu Mahawela
    I need to Broadcast a TV channel to a Website. I need a GUI application for Flash Media Live Encoding. Famous Adobe FME does not have a Linux version. I did try to install Open Broadcast Encoder in Ubuntu 13.04 64amd but wasnt successfull. So the things that I need to know are; Is There any GUI Application for Flash Media Live Encoding for Ubuntu or Linux ? Is it able to succesfully install Open Broadcast Encoder In Ubuntu ?

    Read the article

  • How do I get a Canon MG, MP and MX series USB printer working?

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0 Here is what I have tried: Tried the HK link again, but no luck so far. However, I connected the printer wirelessly to router on other xp box. Installing the driver from ppa:michael-gruz/canon doesn't work, but the driver is installed

    Read the article

  • TypeError: Cannot call method 'hasOwnProperty' of null, while creating a QMLscene window

    - by tomoqv
    I am trying to make a simple Ubuntu Touch web application with Qt Creator. I have set up a new project according to the tutorial and committed the files to Bazaar. I have set a url instead of the default index.htm in the qml file of the project. Using build-run loads a QML Scene window with the desired webpage, but Qt Creator yields the following output: Starting /usr/lib/i386-linux-gnu/qt5/bin/qmlscene -I /home/tomas/ubuntu-sdk/SL-planner -I /usr/bin -I /usr/lib/i386-linux-gnu/qt5/qml /home/tomas/ubuntu-sdk/SL-planner/SL-planner.qml unity::action::ActionManager::ActionManager(QObject*): Could not determine application identifier. HUD will not work properly. Provide your application identifier in $APP_ID environment variable. file:///usr/lib/i386-linux-gnu/qt5/qml/Ubuntu/Components/MainView.qml:257: TypeError: Cannot call method 'hasOwnProperty' of null My SL-planner.qml looks like this: import QtQuick 2.0 import Ubuntu.Components 0.1 import QtWebKit 3.0 /*! \brief MainView with a Flickable WebView. */ MainView { // objectName for functional testing purposes (autopilot-qt5) objectName: "mainView" // Note! applicationName needs to match the "name" field of the click manifest applicationName: "com.ubuntu.developer.tomoqv.SL-planner" /* This property enables the application to change orientation when the device is rotated. The default is false. */ automaticOrientation: true width: units.gu(100) height: units.gu(75) Flickable { id: webViewFlickable anchors.fill: parent WebView { id: webView anchors.fill: parent url: "http://mobil.sl.se" } } } What am I missing?

    Read the article

  • Leadership does not see value in standard process for machine configuration and new developer orientation

    - by opensourcechris
    About 3 months ago our lead web developer and designer(same person) left the company, greener pastures was the reason for leaving. Good for them I say. My problem is that his department was completely undocumented. Things have been tough since the lead left, there is a lot of knowledge both theoretical knowledge we use to quote new projects and technical/implementation knowledge of our existing products that we have lost as a result of his departure. My normal role is as a product manager (for our products themselves) and as a business analyst for some of our project based consulting work. I've taught myself to code over the past year and in an effort to continue moving forward I've taken on the task of setting my laptop up as a development machine with hopes of implementing some of the easier feature requests and fixing some of the no brainer bugs that get submitted into our ticketing system. But, no one knows how to take a fresh Windows machine and configure it to work seamlessly with our production apps. I have requested my boss, who is still in contact with the developer who left, ask them to document and create a process to onboard a new developer, software installation, required packages, process to deploy to the productions application servers, etc. None of this exists, and I'm spinning my wheels trying to get my computer working as a functional development machine. But she does not seem to understand the need for such a process to exist. Apparently the new developer who replaced the one who left has been using a machine that was pre-configured for our environment, so even the new developer could not set up a new machine if we added another developer. My question is two part: Am I wrong in assuming a process to on-board and configure a new computer to be part of our development eco-system should exist? Am I being a whinny baby and should I figure the process out and create a document on my own?

    Read the article

  • TDD - Outside In vs Inside Out

    - by Songo
    What is the difference between building an application Outside In vs building it Inside Out using TDD? These are the books I read about TDD and unit testing: Test Driven Development: By Example Test-Driven Development: A Practical Guide: A Practical Guide Real-World Solutions for Developing High-Quality PHP Frameworks and Applications Test-Driven Development in Microsoft .NET xUnit Test Patterns: Refactoring Test Code The Art of Unit Testing: With Examples in .Net Growing Object-Oriented Software, Guided by Tests---This one was really hard to understand since JAVA isn't my primary language :) Almost all of them explained TDD basics and unit testing in general, but with little mention of the different ways the application can be constructed. Another thing I noticed is that most of these books (if not all) ignore the design phase when writing the application. They focus more on writing the test cases quickly and letting the design emerge by itself. However, I came across a paragraph in xUnit Test Patterns that discussed the ways people approach TDD. There are 2 schools out there Outside In vs Inside Out. Sadly the book doesn't elaborate more on this point. I wish to know what is the main difference between these 2 cases. When should I use each one of them? To a TDD beginner which one is easier to grasp? What is the drawbacks of each method? Is there any materials out there that discuss this topic specifically?

    Read the article

  • Wirenet : découverte du premier trojan Linux/Mac OS X interplateforme de vol de mot de passe

    Wirenet : le premier trojan Linux/Mac OS X interplateforme De vol de mot de passe Doctor Web, l'éditeur russe d'antivirus, a annoncé l'émergence du premier Trojan Linux/OSX interplateforme de vol de mot de passe. Par l'utilisation d'un backdoor, le malware au nom de code BackDoor.Wirenet.1 arrive à transporter les données de l'utilisateur vers un serveur de contrôle situé à l'adresse 212.7.208.65. Les données récoltées comportent les touches de claviers tapées à l'image d'un keylogger et les mots de passe des utilisateurs enregistrés dans les navigateurs Opera, Firefox, Chrome et Chromium et dans les applications Thunderbird, SeaMonkey et Pidgin. L'AES (Advanced Encryption...

    Read the article

  • What a web developer can learn [closed]

    - by knoxxs
    There are many things to learn in web development. You can easily find what are the most important thing that you need to learn if you want to be a webmaster. Answer to questions about how to become a web developer or a webmaster only contained limited items that someone need to master. (Some eg - a, b ) But the problem is that these resources are not complete. When I started learning web development i follow the same steps. But after learning the basic development I didn't know that I have learnt nothing, there are many more things to learn. I realized this by following blogs , Q&A sites. When I first downloaded the HTNL% Boilerplate, the issue that they have covered, some of them I haven't even heard about. I want you to just suggest what are the possible things, issues that someone can learn and why to learn. I know the answer is follow blogs and do your work you will learn with time, but with these platforms I could get some benefit out of other experiences. This question is not how to become a webmaster, but answer to this may also cover that too.

    Read the article

  • Is QtQuick.Controls available on Ubuntu 13.10

    - by javascript is future
    I was looking to do UI development in QML, and I really want it to look native. I found the QtQuick.Controls (http://qt-project.org/doc/qt-5.1/qtquickcontrols/qtquickcontrols-index.html), but when I try make a simple application, it tells me that QtQuick.Controls isn't installed. main.qml: import QtQuick 2.1 import QtQuick.Controls 1.0 Rectangle { height: 200 width: 200 } terminal: $ qmlscene main.qml file:///tmp/main.qml:2 module "QtQuick.Controls" is not installed Also, I downloaded the source from https://qt.gitorious.org/qt/qtquickcontrols/source/stable, ran qmake && make, but this returned the following output: cd src/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/src.pro -o Makefile ) && make -f Makefile make[1]: Går til katalog '/tmp/qtquickcontrols/src' cd controls/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/controls/controls.pro -o Makefile ) && make -f Makefile make[2]: Går til katalog '/tmp/qtquickcontrols/src/controls' g++ -c -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -O2 -fvisibility=hidden -fvisibility-inlines-hidden -std=c++0x -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_XKB -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_QUICK_LIB -DQT_QML_LIB -DQT_WIDGETS_LIB -DQT_NETWORK_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/share/qt5/mkspecs/linux-g++ -I. -I/usr/include/qt5 -I/usr/include/qt5/QtQuick -I/usr/include/qt5/QtQml -I/usr/include/qt5/QtWidgets -I/usr/include/qt5/QtNetwork -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtGui/5.1.1 -I/usr/include/qt5/QtGui/5.1.1/QtGui -I/usr/include/qt5/QtCore -I/usr/include/qt5/QtCore/5.1.1 -I/usr/include/qt5/QtCore/5.1.1/QtCore -I.moc/release-shared -o .obj/release-shared/qquickaction.o qquickaction.cpp qquickaction.cpp:49:39: fatal error: private/qguiapplication_p.h: No such file or directory #include <private/qguiapplication_p.h> ^ Is there some PPA I could use, or do I have to wait for Trusty to get out, before I can use native controls from Qt? Regards

    Read the article

  • What's the best project management software for internal dev. 5 man shop

    - by P.Brian.Mackey
    I work for a large corporation, but we do small intranet web application development. Our project management tracking sucks. Its custom software built by a jr. intern. For what its worth, our development style is akin to agile, but there's nothing set in stone...very customer oriented approach. I need project tracking that meets the criteria: Intranet, internal products. Mostly maintenance, some new development. 5 developers 12 products 1 hands-off manager. He really just wants to know estimated man hours, due date for dev, QA and release. Along with a short description of the project. Free or super cheap. Bonus Simple pretty UI. Think pretty charts. Hope I covered everything. Please ask for any clarification. If you read dreaming in code, the company uses some project tracking software that sounds pretty sweet. Note, we do have Team Foundation Server. I already tried pushing its use as PM tracking, but its too complicated. I can't get people to sit and train. So this software has to be easy.

    Read the article

  • Should I use the cool, new and awesome stuff [closed]

    - by Ieyasu Sawada
    I'm in the field of Web Development. I follow a lot of awesome people on Twitter(Paul Irish, Alex Sexton, David Walsh, Rebecca Murphey, etc.) By following these people I'm constantly updated of the new and cool stuff in web development(backbone.js, angular.js, require.js, ember.js, jasmine, etc.) Now I'm creating a web application for a client and because of the different tools, libraries, plugins that I'm aware of I don't even know anymore when do I need to use those or do I even need those, or how do I even implement it in a sane way where I won't have to repeat myself(DRY). What's your advice on what I really need to do in order to become better. Do I really need to use these cool new tools or should I just stick with what I know for now and try to make my code better. Should I unfollow these people in order to not pollute my mind with stuff that I can't really use now because I don't have the necessary experience in order to use it. What sort of things should I really be focusing on for someone like me who has only about 2 years of experience in the field of web development.

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >