Search Results

Search found 6612 results on 265 pages for 'seconds'.

Page 215/265 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• In Perl, how can a subroutine get a coderef that points to itself?

  - by hillu

  For learning purposes, I am toying around with the idea of building event-driven programs in Perl and noticed that it might be nice if a subroutine that was registered as an event handler could, on failure, just schedule another call to itself for a later time. So far, I have come up with something like this: my $cb; my $try = 3; $cb = sub { my $rc = do_stuff(); if (!$rc && --$try) { schedule_event($cb, 10); # schedule $cb to be called in 10 seconds } else { do_other_stuff; } }; schedule_event($cb, 0); # schedule initial call to $cb to be performed ASAP Is there a way that code inside the sub can access the coderef to that sub so I could do without using an extra variable? I'd like to schedule the initial call like this. schedule_event( sub { ... }, 0); I first thought of using caller(0)[3], but this only gives me a function name, (__ANON__ if there's no name), not a code reference that has a pad attached to it.

  Read the article

• SQL Where Clause Against View

  - by Adam Carr

  I have a view (actually, it's a table valued function, but the observed behavior is the same in both) that inner joins and left outer joins several other tables. When I query this view with a where clause similar to SELECT * FROM [v_MyView] WHERE [Name] like '%Doe, John%' ... the query is very slow, but if I do the following... SELECT * FROM [v_MyView] WHERE [ID] in ( SELECT [ID] FROM [v_MyView] WHERE [Name] like '%Doe, John%' ) it is MUCH faster. The first query is taking at least 2 minutes to return, if not longer where the second query will return in less than 5 seconds. Any suggestions on how I can improve this? If I run the whole command as one SQL statement (without the use of a view) it is very fast as well. I believe this result is because of how a view should behave as a table in that if a view has OUTER JOINS, GROUP BYS or TOP ##, if the where clause was interpreted prior to vs after the execution of the view, the results could differ. My question is why wouldn't SQL optimize my first query to something as efficient as my second query?

  Read the article

• Silverlight 4 seems like starving of memory

  - by Marco

  I have been playing a bit with Silverlight and try to port my Silverlight 3.0 application to Silverlight 4.0. My application loads different XAP files and upon a user request create an instance of a Xaml user control and adds it to the main container, in a sort of MEF approach in order I can have an extensible and pluggable application. The application is pretty huge and to keep acceptable the performances and the initial loading I have built up some helper classes to load in the background all pages and user controls that might be used later on. On Silverlight 3.0 everything was running smoothly without any problem so far. Switching to SL 4.0 I have noticed that when the process approaches to create the instances of the user controls the layout freezes unexpectedly for a minute and sometimes for more. Looking at the task manager the memory usage of IE jumps from 50MB to 400MB and sometimes up to 1.5 GB. If the process won't take that much the layout is rendered properly even though the memory usage is still extremely high. Otherwise everything crashes due to out of memory exception. Running the same application compiled in SL3, the memory used is about 200MB when all the usercontrols are loaded. Time spent to load the application in SL3 is about 10 seconds, while it takes up to 3 mins in SL4 There are no transparencies, no opacities set, no effects and animations in the layout. User controls are instantied on the fly and added or removed in the visual tree on purpose when the user switches from one screen to another. The resources are all cleaned properly when a usercontrol is removed from the visual tree to allow the GC to operate in the background. I may do something wrong but I could not figure out where exactly nail out the source of this problem. As far as I know there is no memory profiler in SL4 that can help me out to find where to look at. But again I could not be updated on new debugging tools available.

  Read the article

• Stall in animation

  - by tech74

  Hi , I am using this code from this site http://ramin.firoozye.com/2009/09/29/semi-modal-transparent-dialogs-on-the-iphone/ to show a modal view and remove it. It displays fine ie drops in from the top but when being removed it stalls just on its way out just for a fraction of second but its noticeable how do i get rid of the stall. The view i am showing is view of a viewcontroller which is a memeber of the parent viewcontroller so i call methods like this to display [self showModal:self.modalController.view] to hide [self hideModal:self.modalController.view]; (void) showModal:(UIView*) modalView { UIWindow* mainWindow = (((SessionTalkAppDelegate*) [UIApplication sharedApplication].delegate).window); //CGPoint middleCenter = modalView.center; CGPoint middleCenter = CGPointMake(160, 205); CGSize offSize = [UIScreen mainScreen].bounds.size; //CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, offSize.height * 1.5); CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, -100); // start from top modalView.center = offScreenCenter; // we start off-screen [mainWindow addSubview:modalView]; // Show it with a transition effect [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.3]; // animation duration in seconds [UIView setAnimationCurve:UIViewAnimationCurveEaseInOut]; modalView.center = middleCenter; [UIView commitAnimations]; } // Use this to slide the semi-modal back up. - (void) hideModal:(UIView*) modalView { CGSize offSize = [UIScreen mainScreen].bounds.size; //CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, offSize.height * 1.5); CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, -100); [UIView beginAnimations:nil context:modalView]; [UIView setAnimationDuration:0.3]; [UIView setAnimationCurve:UIViewAnimationCurveEaseInOut]; [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(hideModalEnded:finished:context:)]; modalView.center = offScreenCenter; [UIView commitAnimations]; } (void) hideModalEnded:(NSString *)animationID finished:(NSNumber *)finished context:(void )context { UIView modalView = (UIView *)context; [modalView removeFromSuperview]; //[modalView release]; }

  Read the article

• Update panel and usercontrols

  - by Charlie Brown

  I have two web user controls nested inside of an update panel. The events inside the user controls do not appear to trigger the panel. For testing, I have set the method the fires to sleep for 3 seconds, and added an update progress panel to the page. The update progress panel never comes up and the page reflashes as usual. The user controls work correctly and do what they need to do, but I would like to make them ajaxy and pretty. Is there a special method for adding usercontrols to an update so the postback works correctly? <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <asp:UpdateProgress ID="UpdateProgress1" runat="server" DisplayAfter="100"> <ProgressTemplate> UPDATING...</ProgressTemplate> </asp:UpdateProgress> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <div id="order"> <keg:BeerList runat="server" ID="uxBeerList" /> <kegcart:ShoppingCart runat="server" ID="uxCustomerCart" /> <br class="clearfloat" /> </div> </ContentTemplate> </asp:UpdatePanel> Protected Sub uxBeerList_AddItem(ByVal item As KegData.IOrderableItem) Handles uxBeerList.AddItem uxCustomerCart.AddItemToOrder(item) System.Threading.Thread.Sleep(5000) End Sub

  Read the article

• Why isn't my new object being seen? C#

  - by Dan

  I am getting ready to take a class at a college on C#. I have been reading up on it a lot and decided to start a fun project. Here is what my project consists of: Main Control Form Configuration Form Arduino Program.cs calls Configuration.cs at start. This is where pin modes for the Arduino are set and where a timer is set. When I set these values, they get sent to MainControl.cs. When I hit the "Save" button in Configuration.cs, a MainControl.cs object is created [[I am correct in that?]] All of those values that were sent by Configuration.cs had corresponding setters that set private static variables in MainControl.cs [[ I don't really know if that is the preferred way, I am most definetly open to any suggestion anyone has]] MainControl.cs uses its default constructor, and this constructor calls a method that creates an arduino object from one of the private variables (serialPort) [[ Using this Arduino class Firmata.NET ]] When the arduino object is created, I know (I guess I do) because the form takes a few seconds to come up (As opposed to not using serial port) My problem is this: I do not understand why nothing can see the object I have been very wordy, I apologize if I wasn't concise. Here is the code: public partial class CMainControl : Form { private static string serialPort; public CMainControl() { InitializeComponent(); createArduino(); updateConfig(); // Change label values to values set in configuration } private void createArduino() { Arduino arduino = new Arduino(serialPort); } In Configuration.cs, when I set the serial port through a combobox, the value is sent to MainControl.cs just fine. Here is the error I get: Error 1 The name 'arduino' does not exist in the current context C:\Programming\Visual Studio\Workhead Demo\Workhead Demo\CMainControl.cs 94 13 Workhead Demo Please let me know if anyone can help and/or offer pointers, and please let me know if I didn't post or format anything correctly. Thank you very much :)

  Read the article

• Error 1053: the service did not respond to the start or control request in a timely fashion

  - by deejjaayy

  i know this is very much a "how long is a piece of string" type of question, however i have recently inherited a couple of applications that run as windows services, and i am having problems providing a gui (accessible from a context menu in system tray) with both of them. before you ask, the reason why we need a gui for a windows service is in order to be able to re-configure the behaviour of the windows service(s) without resorting to stopping/re-starting. my code works fine in debug mode, and i get the context menu come up, and everything behaves correctly etc. when i install the service via "installutil" using a named account (i.e., not Local System Account), the service runs fine, but doesn't display the icon in the system tray (i know this is normal behaviour because i don't have the "interact with desktop" option). here is the problem though - when i choose the "LocalSystemAccount" option, and check the "interact with desktop" option, the service takes AGES to start up for no obvious reason, and i just keep getting "Could not start the ... service on Local Computer. Error 1053: the service did not respond to the start or control request in a timely fashion". incidentally, i increased the windows service timeout from the default 30 seconds to 2 minutes via a registry hack (see http://support.microsoft.com/kb/824344, search for TimeoutPeriod in section 3), however the service start up still times out. my first question is - why might the "Local System Account" login takes SOOOOO MUCH LONGER than when the service logs in with the non-LocalSystemAccount, causing the windows service time-out? what's could the difference be between these two to cause such different behaviour at start up? secondly - taking a step back, all i'm trying to achieve, is simply a windows service that provides a gui for configuration - I'd be quite happy to run using the non-Local System Account (with named user/pwd), if I could get the service to interact with the desktop (that is, have a context menu available from the system tray). is this possible, and if so how? any pointers to the above questions would be very much appreciated! thanks in advance for your help.

  Read the article

• SignalR - Handling disconnected users

  - by guilhermeGeek

  Hy, I'm using the signalR library on a project to handle an notification and chat modules. I've a table on an database to keep a track of online users. The HUB for chat is inheriting IDisconnect where i disconnect the user. After disconnecting the user, i warm the users about that event. At this point, i check if the disconnect user is the client. If it's, then i call an method on HUB to reconnect the user (just update the table). I do this because with the current implementation, once the user closes a tab on the browser it calls the Disconnect task but he could have another tab opened. I've not tested (with larger requests) this module yet, but on my development server it could take a few seconds between the IDisconnect event, and the request from the user to connect again. I'm concerned with my implementation to handle disconnected users from the chat but i can't see another way to improve this. If possible, could someone give me a advice on this, or this is the only solution that i've?

  Read the article

• postgresql table for storing automation test results

  - by Martin

  I am building an automation test suite which is running on multiple machines, all reporting their status to a postgresql database. We will run a number of automated tests for which we will store the following information: test ID (a GUID) test name test description status (running, done, waiting to be run) progress (%) start time of test end time of test test result latest screenshot of the running test (updated every 30 seconds) The number of tests isn't huge (say a few thousands) and each machine (say, 50 of them) have a service which checks the database and figures out if it's time to start a new automated test on that machine. How should I organize my SQL table to store all the information? Is a single table with a column per attribute the way to go? If in the future I need to add attributes but want to keep compatibility with old database format (ie I may not want to delete and create a new table with more columns), how should I proceed? Should the new attributes just be in a different table? I'm also thinking of replicating the database. In case of failure, I don't mind if the latest screenshots aren't backed up on the slave database. Should I just store the screenshots in its own table to simplify the replication? Thanks!

  Read the article

• JConsole does not connect when a program (running in eclipse) is waiting for a console input

  - by Calm Storm

  Hi, I have a problem similar to the one mentioned here. I have a program which launches a selenium browser and refreshes it every 2 seconds. My idea here was to monitor the memory usage of my application as the page is being hit. This console program does a "System.in.read" and when a user presses enter key, this stops the browser refresh thread. I run the program and it runs as I would expect it to. But when I fire jconsole and attach it to the process, it looks like jconsole waits forever to attach. This is because of the "System.in.read", apparently as shown in the JConsole source. In my code it makes perfect sense for me to terminte the browser when user presses something so is there any alternative available at all ? (Posted code sample below) package com.ekanathk; import java.util.ArrayList; import java.util.List; import org.junit.Test; public class MultiThread { @Test public void testSimple() throws Exception { List<Integer> x = new ArrayList<Integer>(); for(int i = 0; i < 1000; i++) { x.add(i); } System.out.print("Press Enter to stop (try attach a jconsole now...."); System.in.read(); } } The problem here seems to be that any System.in.read (either in Main thread or any threads) seems to completely block jconsole. I guess the problem essentially boils down to multiple threads requesting system inputs at the same time? Is there a solution ? UPDATE 1: It seems this works fine when launching the class from a command line, however when I run from eclipse, jconsole cant connect. Any reasons ?

  Read the article

• Perf4J Logging Config Help

  - by manyxcxi

  I currently have a long running process that I am trying to analyze with Perf4J. I currently have it writing results in CSV format to its own log file using the AsyncCoalescingStatisticsAppender and a StatisticsCsvLayout on the file appender. My question is; when I try and use the --graph option from the command line (using the perf4j jar) it isn't populating the data points- it isn't populating anything. Are my appenders set incorrectly? The log file contains hundreds (sometimes thousands) of data points of about 10 different tag names. <appender name="perfAppender" class="org.apache.log4j.FileAppender"> <param name="File" value="perfStats.log"/> <layout class="org.perf4j.log4j.StatisticsCsvLayout"> </layout> </appender> <appender name="CoalescingStatistics" class="org.perf4j.log4j.AsyncCoalescingStatisticsAppender"> <!-- The TimeSlice option is used to determine the time window for which all received StopWatch logs are aggregated to create a single GroupedTimingStatistics log. Here we set it to 10 seconds, overriding the default of 30000 ms --> <param name="TimeSlice" value="10000"/> <appender-ref ref="ConsoleAppender"/> <appender-ref ref="CompositeRollingFileAppender"/> <appender-ref ref="perfAppender"/> </appender>

  Read the article

• ASP.NET MVC on Cassini: How can I force the "content" directory to return 304s instead of 200s?

  - by Portman

  Scenario: I have an ASP.NET MVC application developed in Visual Studio 2008. There is a root folder named "Content" that stores images and stylesheets. When I run locally (using Cassini) and browse my application, every resource from the "Content" directory is always downloaded. Using Firebug, I can verify that the web server returns an HTTP 200 ("ok"). Desired: I would like for Cassini to return HTTP 304 ("not modified") instead of 200. This is the behavior when running the site under IIS7. Reasoning: The site I am working on has a large number of static resources (often as many as 40 per page). Browsing the site is very fast on IIS7, because these resources are (correctly) cached by the browser. However, browsing the site on my local machine is painfully slow. Pages that render in under 1 second on IIS7 take over 30 seconds to render on Cassini. It's actually faster for me to upload the entire website every few minutes and test from there. (Yes, I recognize that this is perverse and crazy.) So: how can I instruct/trick Cassini into treating the "Content" directory like IIS7 does?

  Read the article

• hudson.util.ProcessTreeTest test error

  - by senzacionale

  error: Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.011 sec Running hudson.util.ProcessTreeTest Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.181 sec <<< FAILURE! Running hudson.model.LoadStatisticsTest Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 2.089 sec Running hudson.util.ArgumentListBuilderTest Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.053 sec Running hudson.util.RobustReflectionConverterTest Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.029 sec Running hudson.util.VersionNumberTest Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.074 sec Running hudson.util.CyclicGraphDetectorTest Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.038 sec Results : Tests in error: testRemoting(hudson.util.ProcessTreeTest) Tests run: 102, Failures: 0, Errors: 1, Skipped: 0 [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] There are test failures. Please refer to D:\PROJEKTI\Maven\hudson\main\core\target\surefire-reports for the individual test results. [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 17 minutes 58 seconds [INFO] Finished at: Fri Jun 11 21:04:46 CEST 2010 [INFO] Final Memory: 85M/152M [INFO] ------------------------------------------------------------------------ error log: ------------------------------------------------------------------------------- Test set: hudson.util.ProcessTreeTest ------------------------------------------------------------------------------- Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.181 sec <<< FAILURE! testRemoting(hudson.util.ProcessTreeTest) Time elapsed: 0.169 sec <<< ERROR! org.jvnet.winp.WinpException: Failed to read environment variable table error=299 at .\envvar-cmdline.cpp:114 at org.jvnet.winp.Native.getCmdLineAndEnvVars(Native Method) at org.jvnet.winp.WinProcess.parseCmdLineAndEnvVars(WinProcess.java:114) at org.jvnet.winp.WinProcess.getEnvironmentVariables(WinProcess.java:109) at hudson.util.ProcessTree$Windows$1.getEnvironmentVariables(ProcessTree.java:419) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at hudson.remoting.RemoteInvocationHandler$RPCRequest.perform(RemoteInvocationHandler.java:274) at hudson.remoting.RemoteInvocationHandler$RPCRequest.call(RemoteInvocationHandler.java:255) at hudson.remoting.RemoteInvocationHandler$RPCRequest.call(RemoteInvocationHandler.java:215) at hudson.remoting.UserRequest.perform(UserRequest.java:114) at hudson.remoting.UserRequest.perform(UserRequest.java:48) at hudson.remoting.Request$2.run(Request.java:270) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) does anyone have any idea what can be wrong in test? Regards

  Read the article

• JConsole does not connect when a program is waiting for a console input

  - by Calm Storm

  Hi, I have a problem similar to the one mentioned here. I have a program which launches a selenium browser and refreshes it every 2 seconds. My idea here was to monitor the memory usage of my application as the page is being hit. This console program does a "System.in.read" and when a user presses enter key, this stops the browser refresh thread. I run the program and it runs as I would expect it to. But when I fire jconsole and attach it to the process, it looks like jconsole waits forever to attach. This is because of the "System.in.read", apparently as shown in the JConsole source. In my code it makes perfect sense for me to terminte the browser when user presses something so is there any alternative available at all ? (Posted code sample below) package com.ekanathk; import java.util.ArrayList; import java.util.List; import org.junit.Test; public class MultiThread { @Test public void testSimple() throws Exception { List<Integer> x = new ArrayList<Integer>(); for(int i = 0; i < 1000; i++) { x.add(i); } System.out.print("Press Enter to stop (try attach a jconsole now...."); System.in.read(); } } The problem here seems to be that any System.in.read (either in Main thread or any threads) seems to completely block jconsole. I guess the problem essentially boils down to multiple threads requesting system inputs at the same time? Is there a solution ?

  Read the article

• can load data(google app enngine) from http://localhost:8100/remote_api ..

  - by zjm1126

  i can download data from gae (http://zjm1126.appspot.com/remote_api), this is code: appcfg.py download_data --application=zjm1126 --url=http://zjm1126.appspot.com/remote_api --filename=a.csv and it successful : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://zjm1 126.appspot.com/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162421 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162421.sql3 [INFO ] Opening database: bulkloader-results-20100618.162421.sql3 [INFO ] Connecting to zjm1126.appspot.com/remote_api Please enter login credentials for zjm1126.appspot.com Email: [email protected] Password for [email protected]: [INFO ] Downloading kinds: [u'LogText', u'Greeting', u'Forum', u'Thread'] .... [INFO ] Have 0 entities, 0 previously transferred [INFO ] 0 entities (8804 bytes) transferred in 11.3 seconds so i want to know can load data from 127.0.0.1 , this is my code : appcfg.py download_data --application=zjm1126 --url=http://localhost:8100/remote_api --filename=a.csv and the error is : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://loca lhost:8100/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162325 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162325.sql3 [INFO ] Opening database: bulkloader-results-20100618.162325.sql3 Please enter login credentials for localhost Email: [email protected] Password for [email protected]: [INFO ] Connecting to localhost:8100/remote_api [ERROR ] Exception during authentication Traceback (most recent call last): File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 3169, in Run self.request_manager.Authenticate() File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 1178, in Authenticate remote_api_stub.MaybeInvokeAuthentication() File "d:\Program Files\Google\google_appengine\google\appengine\ext\remote_api \remote_api_stub.py", line 542, in MaybeInvokeAuthentication datastore_stub._server.Send(datastore_stub._path, payload=None) File "d:\Program Files\Google\google_appengine\google\appengine\tools\appengin e_rpc.py", line 346, in Send f = self.opener.open(req) File "D:\Python25\lib\urllib2.py", line 387, in open response = meth(req, response) File "D:\Python25\lib\urllib2.py", line 498, in http_response 'http', request, response, code, msg, hdrs) File "D:\Python25\lib\urllib2.py", line 425, in error return self._call_chain(*args) File "D:\Python25\lib\urllib2.py", line 360, in _call_chain result = func(*args) File "D:\Python25\lib\urllib2.py", line 506, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) HTTPError: HTTP Error 404: Not Found [INFO ] Authentication Failed so what should i do , thanks

  Read the article

• Disable proxy for entire application?

  - by Brent

  Ever since upgrading to Visual Studio 2010, I'm running into an issue where the first web request of any type (WebRequest, WebClient, etc.) hangs for about 20 seconds before completing. Subsequent calls work quickly. I've narrowed down the problem to a proxy issue. If I manually disable proxy settings, I don't experience this delay: Dim wrq As WebRequest = WebRequest.Create(Url) wrq.Proxy = Nothing What's strange is that there are no proxy settings enabled on this machine in Internet Options. What I'm wondering is if there is a way to disable proxy settings for my entire project in one shot without explicitly disabling as above for every web object. The main reason I want to be able to do this is that I'm trying to use an API (http://code.google.com/p/google-api-for-dotnet/) which uses web requests, but does not provide any way to manually disable proxy settings. I have found some information suggesting that I need to add some proxy information to the app.config file, but I get errors building my program if I make an edits to that file. Can anyone point me in the right direction?

  Read the article

• Simple CalendarStore query puts application into infinite loop!?

  - by Frank R.

  Hi, I've been looking at adding iCal support to my new application and everything seemed just fine and worked on my Mac OS X 10.6 Snow Leopard development machine without a hitch. Now it looks like depending on what is in your calendar the very simple query below: - (NSArray*) fetchCalendarEventsForNext50Minutes { NSLog(@"fetchCalendarEventsForNext50Minutes"); NSTimeInterval start = [NSDate timeIntervalSinceReferenceDate]; NSDate* startDate = [[NSDate alloc] init]; NSDate* endDate = [startDate addTimeInterval: 50.0 * 60.0]; NSPredicate *eventsForTheNext50Minutes = [CalCalendarStore eventPredicateWithStartDate:startDate endDate:endDate calendars:[[CalCalendarStore defaultCalendarStore] calendars]]; // Fetch all events for this year NSArray *events = [[CalCalendarStore defaultCalendarStore] eventsWithPredicate: eventsForTheNext50Minutes]; NSLog( @"fetch took: %f seconds", [NSDate timeIntervalSinceReferenceDate] - start ); return events; } produces a beachball thrash even with quite limited events in the calendar store. Am I missing something crucial here? The code snippet is pretty much exactly from the documentation at: // Create a predicate to fetch all events for this year NSInteger year = [[NSCalendarDate date] yearOfCommonEra]; NSDate *startDate = [[NSCalendarDate dateWithYear:year month:1 day:1 hour:0 minute:0 second:0 timeZone:nil] retain]; NSDate *endDate = [[NSCalendarDate dateWithYear:year month:12 day:31 hour:23 minute:59 second:59 timeZone:nil] retain]; NSPredicate *eventsForThisYear = [CalCalendarStore eventPredicateWithStartDate:startDate endDate:endDate calendars:[[CalCalendarStore defaultCalendarStore] calendars]]; // Fetch all events for this year NSArray *events = [[CalCalendarStore defaultCalendarStore] eventsWithPredicate:eventsForThisYear]; It looks like it has something to do with the recurrence rules, but as far as I can see there are no other ways of fetching events from the calendar store anyway. Has anybody else come across this? Best regards, Frank

  Read the article

• MS SQL datetime precision problem

  - by Nailuj

  I have a situation where two persons might work on the same order (stored in an MS SQL database) from two different computers. To prevent data loss in the case where one would save his copy of the order first, and then a little later the second would save his copy and overwrite the first, I've added a check against the lastSaved field (datetime) before saving. The code looks roughly like this: private bool orderIsChangedByOtherUser(Order localOrderCopy) { // Look up fresh version of the order from the DB Order databaseOrder = orderService.GetByOrderId(localOrderCopy.Id); if (databaseOrder != null && databaseOrder.LastSaved > localOrderCopy.LastSaved) { return true; } else { return false; } } This works for most of the time, but I have found one small bug. If orderIsChangedByOtherUser returns false, the local copy will have its lastSaved updated to the current time and then be persisted to the database. The value of lastSaved in the local copy and the DB should now be the same. However, if orderIsChangedByOtherUser is run again, it sometimes returns true even though no other user has made changes to the DB. When debugging in Visual Studio, databaseOrder.LastSaved and localOrderCopy.LastSaved appear to have the same value, but when looking closer they some times differ by a few milliseconds. I found this article with a short notice on the millisecond precision for datetime in SQL: Another problem is that SQL Server stores DATETIME with a precision of 3.33 milliseconds (0. 00333 seconds). The solution I could think of for this problem, is to compare the two datetimes and consider them equal if they differ by less than say 10 milliseconds. My question to you is then: are there any better/safer ways to compare two datetime values in MS SQL to see if they are exactly the same?

  Read the article

• Sorting Arrays by More the One Value, and Prioritizing the Sort based on Column data.

  - by Mark Tomlin

  I'm looking for a way to sort an array, based on the information in each row, based on the information in certain cells, that I'll call columns. Each row has columns that must be sorted based on the priority of: timetime, lapcount & timestamp. Each column cotains this information: split1, split2, split3, laptime, lapcount, timestamp. laptime if in hundredths of a second. (1:23.45 or 1 Minute, 23 Seconds & 45 Hundredths is 8345.) Lapcount is a simple unsigned tiny int, or unsigned char. timestamp is unix epoch. The lowest laptime should be at the get a better standing in this sort. Should two peoples laptimes equal, then timestamp will be used to give the better standing in this sort. Should two peoples timestamp equal, then the person with less of a lapcount get's the better standing in this sort. By better standing, I mean closer to the top of the array, closer to the index of zero where it a numerical array. I think the array sorting functions built into php can do this with a callback, I was wondering what the best approch was for a weighted sort like this would be.

  Read the article

• Sorting Arrays by More the One Value, and Prioritizing the Sort based on Column data.

  - by Mark Tomlin

  I'm looking for a way to sort an array (we call this a row), with an array of values (that I'll call columns). Each row has columns that must be sorted based on the priority of: timetime, lapcount & timestamp. Each column cotains this information: split1, split2, split3, laptime, lapcount, timestamp. laptime if in hundredths of a second. (1:23.45 or 1 Minute, 23 Seconds & 45 Hundredths is 8345.) Lapcount is a simple unsigned tiny int, or unsigned char. timestamp is unix epoch. The lowest laptime should be at the get a better standing in this sort. Should two peoples laptimes equal, then timestamp will be used to give the better standing in this sort. Should two peoples timestamp equal, then the person with less of a lapcount get's the better standing in this sort. By better standing, I mean closer to the top of the array, closer to the index of zero where it a numerical array. I think the array sorting functions built into php can do this with a callback, I was wondering what the best approch was for a weighted sort like this would be.

  Read the article

• How can I open VLC via browser with PHP (Mac OS X)

  - by Damiqib

  I'm trying to open VLC via browser and make it instantly play the given video file on Mac OS X. This runs on my local server and is only meant to run locally - therefore I already run apache (MAMP) with my username and with group "staff" (defined in httpd.conf). YES - I do know that VLC has http interface - however that is not what I need, so do not suggest that... My current system works without any problems when I run it via Terminal: php /var/www/Movies/index.php - This leads to VLC opening and video starts playing fullscreen like intented. Problems start when I run the same PHP-page with browser. Then the VLC-process starts, but there's no GUI for it, video file won't start playing and the VLC-process takes nearly 100% of CPU. Both; terminal and browser started VLC-processes run with the same user (mine) Both have "Parent process" bash VLC-process begun with Terminal has empty "Process group" (only process id-number) and browser started has "httpd" + (id-number) VLC-process started via browser makes 1000-times more "Mach System Calls" than it's Terminal-started counterpart. Could anyone give me any pointers on how to get this thing working? index.php # $j is a file path to the videofile and is defined before exec('/var/www/Movies/vlc.sh "' . $j . '" > /dev/null 2>&1 & echo $!;'); # If I do this in the given PHP-page it tells me that apache is running # with my username and with the group "staff" like it should be... exec('whoamI'); vlc.sh #!/bin/bash # Activate VLC in 5 seconds to make it the front-most window (sleep 5; open -a VLC) & # Open video file /Applications/VLC.app/Contents/MacOS/VLC --quiet --fullscreen "$1"

  Read the article

• HttpURLConnection inside a loop

  - by Carlos Garces

  Hi! I'm trying to connect to one URL that I know that exist but I don't know when. I don't have access to this server so I can't change anything to receive a event. The actual code is this. URL url = new URL(urlName); for(int j = 0 ; j< POOLING && disconnected; j++){ HttpURLConnection connection = (HttpURLConnection) url.openConnection(); int status = connection.getResponseCode(); if(status == HttpURLConnection.HTTP_OK || status == HttpURLConnection.HTTP_NOT_MODIFIED){ //Some work }else{ //wait 3s Thread.sleep(3000); } } Java not is my best skill and I'm not sure if this code is good from the point of view of performance. I'm opening a new connection every 3 seconds? or the connection is reused? If I call to disconnect() I ensure that no new connections are open in the loop, but... it will impact in performance?. Suggestions? What is the fast/best ways to know it a URL exist?

  Read the article

• C#: Why am I still getting an RCW error when exiting my application?

  - by shifuimam

  To be specific, the error is: An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss. The application in question is a small applet that displays the current clock speed of the CPU as a system tray icon. I'm using a System.Timers.Timer object to refresh the systray icon at an interval of 2.5 seconds. There's a single context menu item to exit the application, which uses the following function to unload everything: public void ExitApp(object sender, EventArgs e) { //stop and disable the timer theInterval.Stop(); theInterval.Enabled = false; //unload the system tray icon TheIcon.Visible = false; //exit the application Application.Exit(); } If I take out everything but Application.Exit(); I get an RCW error and the systray icon doesn't go away until I mouse over it. Everything was working perfectly until I changed the window style of the hidden form used to initialize the systray icon and the timer. If it helps any, I'm using C# 2010 Express.

  Read the article

• What is the rationale to non allow overloading of C++ conversions operator with non-member functio

  - by Vicente Botet Escriba

  C++0x has added explicit conversion operators, but they must always be defined as members of the Source class. The same applies to the assignment operator, it must be defined on the Target class. When the Source and Target classes of the needed conversion are independent of each other, neither the Source can define a conversion operator, neither the Target can define a constructor from a Source. Usually we get it by defining a specific function such as Target ConvertToTarget(Source& v); If C++0x allowed to overload conversion operator by non member functions we could for example define the conversion implicitly or explicitly between unrelated types. template < typename To, typename From operator To(const From& val); For example we could specialize the conversion from chrono::time_point to posix_time::ptime as follows template < class Clock, class Duration operator boost::posix_time::ptime( const boost::chrono::time_point& from) { using namespace boost; typedef chrono::time_point time_point_t; typedef chrono::nanoseconds duration_t; typedef duration_t::rep rep_t; rep_t d = chrono::duration_cast( from.time_since_epoch()).count(); rep_t sec = d/1000000000; rep_t nsec = d%1000000000; return posix_time::from_time_t(0)+ posix_time::seconds(static_cast(sec))+ posix_time::nanoseconds(nsec); } And use the conversion as any other conversion. So the question is: What is the rationale to non allow overloading of C++ conversions operator with non-member functions?

  Read the article

• Why is graphviz drawing two arrows, and using a weird order?

  - by dmd

  Why is graphviz drawing two arrows from uncap_spike to peel, and why is it drawing peel to the right of hang? I want uncap_spike - peel - hang - spike, in that order, with one edge between each. digraph hangers { compound=true fontname="Gill Sans" node [fontname="Gill Sans" shape=box fillcolor=white style="rounded, filled"] edge [fontname="Gill Sans"] subgraph cluster_prep { style="filled" label=Prep gather [shape=Mrecord label="{gather | EtOH swab\nvented tubing}"] uncap_bottle [label="uncap bottle"] uncap_spike [label="uncap spike"] swab [shape=Mrecord label="{swab EtOH | wait 30 seconds for sterility}"] gather -> uncap_bottle -> swab -> uncap_spike {rank=same gather uncap_bottle swab uncap_spike} } subgraph cluster_hang { style=filled label=Hang {rank=same peel hang} } {rank=same uncap_spike -> peel -> hang -> spike -> prime} hang -> rip [color=firebrick] rip [label="eyelet\nripped" style="filled" shape=octagon regular fontcolor=white fontsize=10 width=.5 fixedsize color=firebrick fillcolor=firebrick ] swab -> not_sterile [color=firebrick] not_sterile [label="not\nsterile" style="filled" shape=octagon regular fontcolor=white fontsize=10 width=.5 fixedsize color=firebrick fillcolor=firebrick ] }

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >