Search Results

Search found 14598 results on 584 pages for 'address'.

Page 216/584 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

  • Ubuntu Server Cannot Route to the Internet

    - by ejes
    I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

    Read the article

  • Multithreading: Communication from Parent thread to child thread

    - by Dennis Nowland
    I have a List of threads normally 3 threads each of the threads reference a webbrowser control that communicates with the parent control to populate a datagridview. What I need to do is when the user clicks the button in a datagridviewButtonCell corresponding data will be sent back to the webbrowser control within the child thread that originally communicated with the main thread. but when I try to do this I receive the following error message 'COM object that has been separated from its underlying RCW cannot be used.' my problem is that I can not figure out how to reference the relevant webbrowser control. I would appreciate any help that anyone can give me. The language used is c# winforms .Net 4.0 targeted Code sample: The following code is executed when user click on the Start button in the main thread private void StartSubmit(object idx) { /* method used by the new thread to initialise a 'myBrowser' inherited from the webbrowser control each submitters object is an a custom Control called 'myBrowser' which holds detail about the function of the object eg: */ //index: is an integer value which represents the threads id int index = (int)idx; //submitters[index] is an instance of the 'myBrowser' control submitters[index] = new myBrowser(); //threads integer id submitters[index]._ThreadNum = index; // naming convention used 'browser' +the thread index submitters[index].Name = "browser" + index; //set list in 'myBrowser' class to hold a copy of the list found in the main thread submitters[index]._dirs = dirLists[index]; // suppress and javascript errors the may occur in the 'myBrowser' control submitters[index].ScriptErrorsSuppressed = true; //execute eventHandler submitters[index].DocumentCompleted += new WebBrowserDocumentCompletedEventHandler(DocumentCompleted); //advance to the next un-opened address in datagridview the navigate the that address //in the 'myBrowser' control. SetNextDir(submitters[index]); } private void btnStart_Click(object sender, EventArgs e) { // used to fill list<string> for use in each thread. fillDirs(); //connections is the list<Thread> holding the thread that have been opened //1 to 10 maximum for (int n = 0; n < (connections.Length); n++) { //initialise new thread to the StartSubmit method passing parameters connections[n] = new Thread(new ParameterizedThreadStart(StartSubmit)); // naming convention used conn + the threadIndex ie: 'conn1' to 'conn10' connections[n].Name = "conn" + n.ToString(); // due to the webbrowser control needing to be ran in the single //apartment state connections[n].SetApartmentState(ApartmentState.STA); //start thread passing the threadIndex connections[n].Start(n); } } Once the 'myBrowser' control is fully loaded I am inserting form data into webforms found in webpages loaded via data enter into rows found in the datagridview. Once a user has entered the relevant details into the different areas in the row the can then clicking a DataGridViewButtonCell that has tha collects the data entered and then has to be send back to the corresponding 'myBrowser' object that is found on a child thread. Thank you

    Read the article

  • Delivering the Integrated Portal Experience!

    - by Michael Snow
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Guest post by Richard Maldonado, Principal Product Manager, Oracle WebCenter Portal Organizations are still struggling to standardize on a user interaction platform which can meet the needs of all their target audiences.  This has not only resulted in inefficient and inconsistent experiences for their users, but it also creates inefficiencies (productivity and costs) for the departments that manage the applications and information systems.  Portals have historically been the unifying platform that provide IT with a common interface which can securely surface the most relevant interactions for a given user and/or group of users.  However, organizations have found that the technologies available have either not provided the flexibility necessary to address all of their use cases, or they rely too much on IT resources to manage, maintain, and evolve.  Empowering  the Business Groups The core issue that IT departments face with delivering portal experiences is having enough resources to respond and address the influx of requirements which come in from the business.  Commonly, when a business group wants a new portal site established for their group, they will submit a request to the IT dept, the IT dept then assigns a resource to an administrator and/or developer to build.  Unfortunately, this approach is not scalable, it can be a time consuming activity which requires significant interaction between the business owner and the IT resource.  A modern user interaction platforms should empower the business groups by providing them tools which they can use to build and manage the portal experiences without the need for IT's involvement.  And because business groups rarely have technical resources (developers) on staff, the tools must be easy enough that virtually any business user could use.  In addition, the tool must be powerful enough to allow them to build the experience that they need, things such as creating a whole new portal, add/manage page and page hierarchy, manage user/group access, add/modify components within the page, etc.  This balance between ease-of-use and flexibility is key to the successful adoption of tools which will ultimately reduce the burden on IT, respond to the needs of the business, and deliver high-value experiences for the users.  Ready or Not, Here They Come: Smartphones and Tablets Recently, several studies have highlighted that smartphone and tablet-style devices have overtaken PC's in both sales and usage.  This shift is further driving organizations to revaluate how they're delivering data, information, and applications to their users.  Users are expecting to get the same level of access and interaction, but in a ways which are optimized for the capabilities of the device that they are using.  Expect More With the ever growing number of new IT projects and flat/shrinking budgets, organizations are looking for comprehensive solutions which can deliver integrated web experiences that are tailored for the users and optimized for mobile devices.  Piecing together a number of point solutions is no longer an option.  A modern portal technology should not only address the traditional needs of integrating and surfacing back-end applications/information, but it should enable the business through easy-to-use tools and accelerate the delivery of mobile optimized experiences.   v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WebCenter in Action Series: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter Featuring Qualcomm & Keste 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-fareast- mso-bidi-font-family:"Times New Roman";}

    Read the article

  • Best algorithm/practice when creating a search mechanism for your database?

    - by Alex Hope O'Connor
    I have been designing a database where it is very important to provide users with a good search mechanism. So I was wondering what some of the best practices are for using keywords to search over multiple database tables and return the relevent records? Some other things I am curious about: The users location, if they provide an address The speed of the algorithm Additional Information: I am using C# and LINQ-To-SQL.

    Read the article

  • Microsoft Issues Security Guidelines for Windows Azure

    New software development lifecycle outlines how to address security threats in the cloud....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Ubuntu Server and setting up two nic cards

    - by kmalik
    I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

    Read the article

  • WebCenter Customer Spotlight: Hitachi Data Systems

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter Watch this Webcast to see a live demo on how HDS creates multilingual content for their 35+ regional websites  Solution SummaryHitachi Data Systems (HDS) provides mid-range and high-end storage systems, software and services. It is a wholly owned subsidiary of Hitachi Ltd. HDS is based in Santa Clara, California, and has over 5,300 employees in more then 100 countries and regions. HDS's main objectives were to provide a consistent message across all their sites, to maintain a tight governance structure across their messages and related content, expand the use of the existing content management systems and implement a centralized translation management system. HDS implemented a global web content management system based on Oracle WebCenter Content and integrated the Lingotek translation management system to manage their multilingual content. The implemented solution provides each Geo with the ability to expand their web offering to meet local market needs, while staying aligned with the Corporate Web Guidelines Company OverviewHitachi Data Systems (HDS) provides mid-range and high-end storage systems, software and services. It is a wholly owned subsidiary of Hitachi Ltd. and part of the Hitachi Information Systems & Telecommunications Division. The company sells through direct and indirect channels in more than 170 countries and regions. Its customers include of 50 percent of the Fortune 100 companies. HDS is based in Santa Clara California and has over 5,300 employees in more than 100 countries and regions. Business ChallengesHDS has over 35 global websites and the lack of global web capabilities led to inconsistency of messaging, slower time to market and failed to address local language needs. There was an extensive operational overhead due to manual and redundant processes. Translation efforts where superficial, inconsistent and wasteful and the lack of translation automation tools discouraged localization.  HDS's main objectives were to provide a consistent message across all their sites, to maintain a tight governance structure across their messages and related content, expand the use of the existing content management systems and implement a centralized translation management system. Solution DeployedHDS implemented a global web content management system based on Oracle WebCenter Content. The solution supports decentralized publishing for their 35+ global sites to address local market needs while ensuring editorial and brand review trough embedded review processes. They integrated the Lingotek translation management system into Oracle WebCenter Content to manage their multilingual content. Business Results Provides each Geo with the ability to expand their web offering to meet local market needs, while staying aligned with the Corporate Web Guidelines Enables end-to-end content lifecycle management across multiple languages Leverage translation memory for reuse and consistency Reduce time to market with central repository of translated content Additional Information HDS Webcast Oracle WebCenter Content Lingotek website

    Read the article

  • How to switch off wifi on startup or from the console

    - by mit
    I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

    Read the article

  • How to leverage the internal HTTP endpoint available on Azure web roles?

    - by Alfredo Delsors
    Imagine you have a Web application using an in-memory collection that changes occasionally but is used very often. The collection gets loaded from storage on the Application_Start global.asax event and is updated whenever its content changes. If you want to deploy this application on Azure you need to keep in mind that more than one instance of the application can be running at any time and therefore you need to provide some mechanism to keep all instances informed with the latest changes. Because the communication through internal endpoints between Azure role instances is at no cost, a good solution can be maintaining the information on Azure Storage Tables, reading its contents on the Application_Start event and populating its changes to all other instances using the internal HTTP port available on Azure Web Roles. You need to follow these steps to leverage the internal HTTP endpoint available on Azure web roles to maintain all instances up to date. 1.   Define an internal HTTP endpoint in the Web Role properties, for example InternalHttpEndpoint   2.   Add a new WCF service to the Web Role, for example NotificationService.svc 3.   Disable multiple site bindings in web.config: <serviceHostingEnvironment multipleSiteBindingsEnabled="false"> 4.   Add a method on the new service to receive notifications from other role instances. namespace Service { [ServiceContract] public interface INotificationService { [OperationContract(IsOneWay = true)] void Notify(Information info); } } 5.   Declare a class that inherits from System.ServiceModel.Activation.ServiceHostFactory and override the method CreateServiceHost to host the internal endpoint. public class InternalServiceFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { var internalEndpointAddress = string.Format( "http://{0}/NotificationService.svc", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["InternalHttpEndpoint"].IPEndpoint); ServiceHost host = new ServiceHost( typeof(NotificationService), new Uri(internalEndpointAddress)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); host.AddServiceEndpoint( typeof(INotificationService), binding, internalEndpointAddress); return host; } } Note that you can use SecurityMode.None because the internal endpoint is private to the instances of the service. 6.   Edit the markup of the service right clicking the svc file and selecting "View markup" to add the new factory as the factory to be used to create the service <%@ ServiceHost Language="C#" Debug="true" Factory="Service.InternalServiceFactory" Service="Service.NotificationService" CodeBehind="NotificationService.svc.cs" %> 7.   Now you can notify changes to other instances using this code: var current = RoleEnvironment.CurrentRoleInstance; var endPoints = current.Role.Instances .Where(instance => instance != current) .Select(instance => instance.InstanceEndpoints["InternalHttpEndpoint"]); foreach (var ep in endPoints) { EndpointAddress address = new EndpointAddress( String.Format("http://{0}/NotificationService.svc", ep.IPEndpoint)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); var factory = new ChannelFactory<INotificationService>(binding); INotificationService instance = factory.CreateChannel(address); instance.Notify(changedinfo); }

    Read the article

  • SEO for replacing blog content, but keeping the same page URL

    - by cphill
    This might not have any major impact on the SEO, but basically I have random blog at this URL: http://example.com/blog (not a real URL), that I am removing and replacing with a company blog. I want to use the http://example.com/blog URL address, but I'm not sure how this would effect my SEO since this random blog content that I am removing has the example.com/blog URL prefix. Would I just add a 310 redirect for those old blog articles and leave the basic /blog URL without any redirects?

    Read the article

  • Database ERD design: 2 types user in one table

    - by Giskin Leow
    I have read this (Database design: 3 types of users, separate or one table?) I decided to put admin and normal user in one table since the attributes are similar: fullname, address, phone, email, gender ... Then I want to draw ERD, suddenly my mind pop out a question. How to draw? Customer make appointment and admin approve appointment. now only two tables, and admin, customer in same table. Help.

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • Which Ecommerce Script Should I Use?

    - by Christofian
    This is a general, community wiki catch-all question to address "I need a eCommerce script that does x, y, and z..." questions. If your question was closed as a duplicate of this question and you feel that the information provided here does not provide a sufficient answer, please open a discussion on Pro Webmasters Meta. I have a list of features that I want for my website's eCommerce script - where can I find a script that includes all of them?

    Read the article

  • If you tried to use Ubuntu then went back to your old OS, why did you do so?

    - by Michael Forrest
    Over the past few years I've been dipping in and out of Ubuntu every so often because I believe in the idea. However, there have always been factors that have made me give up and return to either Windows or OS X, intending to come back when Ubuntu has had a bit more time to 'bake'. Anecdotally, if you have had similar experiences, why did you go back? If we can address these sorts of issues, maybe Ubuntu can get over this hump. I mean 'chasm'.

    Read the article

  • clean urls using .htaccess

    - by Napster
    I am trying to implement clean urls using .htaccess. Basically after searching for some time I found out this code RewriteRule latestnews/([a-zA-Z0-9]+)/$ http://thinkmovie.in/index.php/latestnews/?nid=$1 [L] RewriteRule latestnews/([a-zA-Z0-9]+)$ http://thinkmovie.in/index.php/latestnews/?nid=$1 [L] so when I try to access the following url http://thinkmovie.in/index.php/latestnews/272 it redirects to http://thinkmovie.in/index.php/latestnews?nid=272 But what I want is to retain the url in the browsers address bar as http://thinkmovie.in/index.php/latestnews/272

    Read the article

  • Is it good or bad to have dynamic content in page titles and/or description

    - by Gunjan
    In a local listing website, I append number of search results found in the description(not in title currntly) meta tag of the page as I think this is valuable for users for e.g. "Find address, phone numbers, blah blah blah for 21 outlets in locality. some more stuff after this..." as more places are added to the database, the description for the same page will change frequently. is this good or bad for SEO how about doing the same for title tags?

    Read the article

  • Pointers in C vs No pointers in PHP

    - by AnnaBanana
    Both languages have the same syntax. Why does C have the weird * character that denotes pointers (which is some kind of memory address of the variable contents?), when PHP doesn't have it and you can do pretty much the same things in PHP that you can do in C, without pointers? I guess the PHP compiler handles this internally, why doesn't C do the same? Doesn't this add unneeded complexity in C? For example I don't understand them :)

    Read the article

  • Using Server Variables in ASP.NET 3.5

    If you are an ASP.NET developer you may notice from your day-to-day job in developing websites that there is some functionality that you need in order to complete specific website tasks. For example you may need to know the IP address of a specific visitor or the browser they re using or even where they re coming from. These questions can be answered by knowing how to use Server Variables in ASP.NET 3.5.... Cloud Servers in Demand - GoGrid Start Small and Grow with Your Business. $0.10/hour

    Read the article

  • HTG Explains: What Can You Find in an Email Header?

    - by Jason Faulkner
    Whenever you receive an email, there is a lot more to it than meets the eye. While you typically only pay attention to the from address, subject line and body of the message, there is lots more information available “under the hood” of each email which can provide you a wealth of additional information. Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header? The How-To Geek Guide to Getting Started with TrueCrypt

    Read the article

  • How to deal with malicious domain redirections?

    - by user359650
    It is possible for anybody to buy a domain name containing negative terms and point it to someone's website in order to damage their reputation. For instance someone could buy the domain child-pornography.com and point it to the address 64.34.119.12 which is the address behind stackoverflow.com and people navigating to the domain in question would end up visualizing content from StackExchange which would be detrimental to StackExchange's image. To illustrate this, I added the entry 64.34.119.12 child-pornography.com to my /etc/hosts file and tested. Here is what I obtained: I personally found this user experience terrible as someone could think that Stack Exchange are in favor of child pornography and awaiting support from the community to create a Q&A site about it. I tested with other websites and experienced other behaviors that I would categorize as follows: 1 - Useful 404 page (happens with stackoverflow.com): For me the worst way of handling this as the image of the targeted website is directly associated with the offending domain. The more useful the 404 page, the bigger the impression that the targeted website would be willing to help with child pornography. 2 - Redirection (happens with microsoft.com): For instance when accessing child-pornography.com you get redirected to www.microsoft.com. It isn't as bad as above as the offending domain name never appears alongside the targeted website's content, but still bad in my opinion as it gives the impression the targeted website bought the offending domain and redirected it to their website to get more traffic. 3 - Server error (happens with lemonde.fr): You get an error from the webserver which page doesn't contain any content that can be associated with the targeted website (e.g. default Apache 404 page, completely blank page). I believe that is good as the identify of the targeted website isn't revealed. Above are the various behaviors I experienced, but I also thought about a fourth way of dealing with this which is described below. 4 - Disclaimer page (haven't found any website implementing that technique): Display a message such as : "You ended here because someone bought and linked the child-pornography.com domain to our website. We do not own this domain and do not associate ourselves with it. This request has been logged by our servers and we will raise this issue with the competent authorities to have this domain taken down. If you want to access our website, please click here." The good thing about this method is that it can be implemented at application layer (good if you don't have control over web server which happens with some hosting solutions), allows you to protect yourself from any liability, and offer the visitor to be redirected to your own website. Which of the above options would you implement to deal with malicious domain linking (IMO only options 3 and 4 are worth considering) ?

    Read the article

  • Welcome Windows Embedded Compact!

    - by Luca Calligaris
    Windows Embedded Compact 7 Public Community Technology Preview (Public CTP) is finally available for downloading: You need a Windows Live ID to log in and download the Public CTP Go to the Connection Directory, find Windows Embedded Compact 7 Public CTP and click on (apply) Download the Public CTP from the Compact 7 Public CTP program page In the next blog entries I'll try to address some of the new features of the new version of my favourite OS.

    Read the article

  • Too much delay while sending object over UDP to server

    - by RomZes
    I'm getting 4 sec delay when sending objects over UDP. Working on small game and trying to implement multiplayer. For now just trying to synchronize movements of 2 balls on the screen. StartingPoint.java is my server(first player), that receiving serialized objects (coordinates). SecondPlayer.java is client that sending serialized objects to server. When I'm moving my first object it appears 4 seconds later on different screen. StartingPoint.java @Override public void run() { byte[] receiveData = new byte[256]; byte[] sendData = new byte[256]; // DatagramSocket socketS; try { socket = new DatagramSocket(5000); System.out.println("Socket created on "+ port + " port"); } catch (SocketException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } while(true){ b1.update(this); b3.update(); System.out.println("Starting server..."); //// Receiving and deserializing object try { //socket.setSoTimeout(1000); DatagramPacket packet = new DatagramPacket(buf, buf.length); socket.receive(packet); byte[] data = packet.getData(); ByteArrayInputStream in = new ByteArrayInputStream(data); ObjectInputStream is = new ObjectInputStream(in); // socket.setSoTimeout(300); b1 = (Ball) is.readObject(); } catch (IOException | ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } repaint(); try { Thread.sleep(17); } catch (InterruptedException e) { e.printStackTrace(); } SecondPlayer.java @Override public void run() { while(true){ b.update(); networkSend(); repaint(); try { Thread.sleep(17); } catch (InterruptedException e) { e.printStackTrace(); } } public void networkSend(){ // Serialize to a byte array try { ByteArrayOutputStream bStream = new ByteArrayOutputStream(); ObjectOutputStream oo; oo = new ObjectOutputStream(bStream); oo.writeObject(b); oo.flush(); oo.close(); byte[] bufCar = bStream.toByteArray(); //socket = new DatagramSocket(); //socket.setSoTimeout(1000); InetAddress address = InetAddress.getByName("localhost"); DatagramPacket packet = new DatagramPacket(bufCar, bufCar.length, address, port); socket.send(packet); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); }

    Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >