Search Results

Search found 9340 results on 374 pages for 'andy boot'.

Page 216/374 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• Ubuntu 12.04 using b43-fwcutter

  - by Nathan

  I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• BI&EPM Partner Training and Specialisation Update

  - by Mike.Hallett(at)Oracle-BI&EPM

  1.     Just a reminder for you to take the New Version OBI11g Exams to update your OPN Specialisation @ OPN Exam for OBI Suite 11g is Now LIVE 2.     Check for places on free / subsidised Partner specific Bootcamps which are being run in several countries (and you can always fly there... it is still lower cost than alternatives !) : a.     Exalytics OBI11g Partner Training 3-day hands-on Workshops b.     EPM Planning (Hyperion) V11.1.2 Implementation Hands-On Boot-camp c.     Endeca Information Discovery 3-Day Hands-on Training Boot-Camp 3.     Other Partner Events a.     Frankfurt, Dreieich, November 15: Oracle Endeca Information Discovery b.     Utrecht, November 14: Oracle Bi Test Drives c.     Vilvoorde, November 16: Oracle Bi Test Drives d.     London, November 20: Delivering Insight Across Your Business - Oracle Business Intelligence Workshop e.     Milano, November 13: Oracle Drive Better Business Outcomes with Big Data and Analytics You can also selectively filter search for courses via the Partner Events Calendar @ http://events.oracle.com/search/search?group=Events&keyword=OPN+Only Otherwise, it is worth checking the Oracle Partner Enablement BLOG for any BI / EPM news, especially the sub-Blogs on the right for each country.  And there are many Self-Paced Tutorials for BI&EPM Partners available on demand at any time There is also a monthly Partner Enablement Update (PDF) to find out the latest partner training on Oracle's new products and new releases.

  Read the article

• OS choice for functional developing

  - by Carsten König

  I'm mainly a .NET developer so I normaly use Windows/VisualStudio (that means: I'm spoiled) but I'm enjoying Haskell and other (mostly functional) languagues in my spare time. Now for Haskell the windows-support is ok (you can get the Haskell-Platform) but latley I tried to get a basic Clojure/Scheme environment set up and it's just a pain on windows. So I'm thinking about trying out another OS for better tooling and languague support. Of course that leaves me with MacOS or some Linux distribution. I never used MacOS before and of course Linux would be cheaper (free) and I don't think I can parallel-boot MacOS on your normal PC-Hardware (can you?). PLUS: I don't have a clue about the tools you can use on those (to me) forign OSs. To make it short: I want to explore more Haskell, Clojure, Scala, Scheme and of course need at least good tooling for JavaScript/HTML5/Css. Support for .NET/Mono/F# would be great but for this I will still have my Win7 boot. So I like to know: - what is your prefered OS, Distribution (is Ubuntu viable?) - what Editor/IDE are you using Thank you for your help! PS: I'm not sure if this is the right place for this question but I surely hope so - if not please let me know where I should move this to (StackOverflow don't seem to be the right place IMHO)

  Read the article

• Ubuntu 12.04 - default Radeon driver does not work at all

  - by mumble

  I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

  Read the article

• BusEnum2 and a Minor Bug Fix

  - by Kate Moss' Open Space

  The default root bus driver, BusEnum, enumerate and active drivers one by one in synchronized manner. It is not only slowing the boot time but in the even if any of driver's init function (XXX_init) get hanged, the whole system won't boot at all. There is a sample of enhanced root bus driver, BusEnum2, on the http://msdn.microsoft.com/en-us/library/dd187254.aspx The page provides the sample code and the detail explanation of the design concept. With multi-threaded BusEnum2 on CE7 with SMP enabled system, the scalability is even more significant. Since you have more than one processor and it can load drivers in parallel! Everything looks good so far, except to there is a small bug in the sample code. Fortunately, it is easy to fix. But hard to trace if you ever enc outer it! The BUSENUM2 flag only defined in BUSENUM2\BUSDEF\sources but not in BUSENUM2\BUSENUM\sources. The DeviceFolder is implemented in BUSENUM2\BUSDEF but the instance is created in BUSENUM2\BUSENUM\busenum.cpp, so the result is it allocates less memory than actual need.   Add   CDEFINES=$(CDEFINES) -DBUSENUM2   into BUSENUM2\BUSENUM\sources and the problem fixed!

  Read the article

• How-To Geek is Hiring a Geeky Writer – Here Are the Details

  - by The Geek

  Think you have the perfect combination of geek knowledge and writing skills? We’re looking for an experienced writer to join our team, and here are all the details. We need a new writer to cover topics surrounding Windows 7 or 8, home networking, home routers, security, media, troubleshooting, mobile devices, and many similar topics. We are not looking for writers that focus solely on Linux or tech news writers. Please apply if you have the following qualities: You must be a geek at heart. You must be able to put in plenty of time, work, and dedication. If you’re too busy already, don’t apply. You must be able to write articles that are easy to understand. You must be creative. You must generate ideas for articles on your own, and take suggestions like a pro. You must be at least 18 years old. You must have solid English writing skills. You must be able to write tips, how-to articles, explainers, guides, instructional articles, etc. Again, we are not looking for tech news writers. Here’s a couple of our previous articles so you can get an idea of what we’re looking for in terms of quality and content. Please make sure to look through these before you decide to apply. How-to Article: Make Your Own Windows 8 Start Button with Zero Memory Usage Explainer: HTG Explains: When Do You Need to Update Your Drivers? Explainer: HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? How-To Article: How to Factory Reset Your Android Phone or Tablet When It Won’t Boot How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere

  Read the article

• Really slow wireless internet on 12.04 with HP dv6 6070ca

  - by Joe

  I was recently running the previous version of Ubuntu through Wine, and everything was working great. I decided to upgrade to pangolin when I saw it came out. After upgrading the internet was very slow (the estimated time on the updates was something like 4 days). I thought maybe this had something to do with the Wine installation, so I decided to finally do an actual dual boot. I partitioned my drive all nice and neat, but I made the mistake of connecting to the internet for the installation, and clicking the option to install updates and restricted extras. This was in the morning, circa 6 am. Fast forward to the evening, the installation is frozen at around 75%. In frustration I gave the ol girl a hard shut-down, which effectively rendered my machine useless. I used the thumb drive to reinstall Ubuntu, this time without connecting to the internet. Installed nice and easy, no problems, but the internet is still ridiculously slow. It took me about 20 minutes of frustration and hitting stop and reload repeatedly to even get this question page to open. This is important to me as now Windows won't even boot and I have to use ubuntu for the time being but I can't even bear to turn on my laptop due to the frustration that immediately ensues. Please help! Oh, and I'm relatively new so if there are some terminal commands that spew out info you guys would find useful let me know what they are and I'll post back the information.

  Read the article

• If you develop on multiple operating systems, is it better to have multiple computers + displays?

  - by dan

  I develop for iOS and Linux. My preferred OS is Ubuntu. Now my software shop (me and a partner) is developing for Windows too. Now the question is, is it more efficient to have multiple workstations, one for each target OS? Efficiency and productivity is a higher priority than saving money. I have a 3.4Ghz i7 desktop workstation running Ubuntu and virtualized Windows with two displays, and I'm putting together an even more powerful i7 Hackintosh with 16GB RAM (to replace my weak 2.2Ghz i5 Macbook Pro). My specific dilemma is whether I should sell the first computer and triple boot on the second one, or buy two more displays and run both desktop systems simultaneously. Would appreciate answers from developers who write software for multiple OSes. Running guest OSes in VirtualBox on one system not ideal, because in my experience performance is seriously degraded under virtualization. So the choice is between dual/triple booting on one system vs having two systems, one for OSX+iOS/Windows (dual boot) and the other for Ubuntu (which I prefer to use as my main OS). For much of our work, I write a server-side application in Linux and a client for iOS (or for Windows or OS X) simultaneously.

  Read the article

• Strange resolution on Ubuntu 11.10

  - by FSchmidt

  I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• Data recovery on Ubuntu 11.10?! (after crashing with Seagate 320GB)

  - by Sam

  Just installed 11.10 last week and decided to transfer iTunes music (from Windows dual boot) to my Seagate 320GB. I left it in, restarted, clicked Ubuntu at the boot screen, and then it froze after a few lines of code! I think I got to 3.7086 or something before I pressed CTRL+ALT+DEL and the system restarted after another few lines of code. I am completely new to Ubuntu so after Googling, I made a live CD with 10.04, the most stable release I've heard, and I'm typing this from there now. However, when I go to mount my partition, only the Windows Vista partition (308GB) is there! It has all my Windows files but my Ubuntu 11.10 ones are nowhere to be found. I need to restore these pictures I transferred from my camera using Shotwell the other day... any help is appreciated! p.s. 11.10 has never crashed on me in my trial week, so I'm guessing it's the Seagate hard drive's fault. However, now I'm running it on 10.04 and it works fine.

  Read the article

• Dual Monitor 'How To' for 12.04

  - by Kim Prince

  I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

  Read the article

• Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

  - by Grand Master T

  Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

  Read the article

• Error while reomving the new kernel 2.6.37

  - by Tarek

  Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug.

  Read the article

• How To Use the Restore Partition to Break Into a Mac Running OS X Lion

  - by Justin Garrison

  It’s trivial to break into a Mac using an OS X boot disk, but new Macs use a restore partition for OS installations. Here’s how you can use that partition to reset a user password and break into a Mac. All laptops that come with OS X 10.7 “Lion” or laptops that were upgraded to Lion have a restore partition for easy OS recovery. This easy-to-use recovery partition also opens up hackers to break into your Mac without needing any additional tools. To reset a user password on a Mac with Lion you first need to restart the computer and hold the Command+R (?+R) keys. When the gray Apple logo shows up on the screen you can release the keys. Your computer should automatically boot into the recovery partition. Start by selecting your language and then go to Utilities -> Terminal in the menu. How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

  Read the article

• Graphical glitches on grub and ubuntu desktop

  - by Klyn

  I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

  Read the article

• Why am I getting this error while installing gnome?

  - by Sreehari Rajendran

  i have raring ringtail. I installed gnome a couple days ago. I try to install extensions but the site says I don't have the latest version. I type the command sudo apt-get install gnome-shell and I get this error Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 138 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.103ubuntu0.7) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-25-generic cp: cannot stat ‘/module-files.d/libpango1.0-0.modules’: No such file or directory cp: cannot stat ‘/modules/pango-basic-fc.so’: No such file or directory E: /usr/share/initramfs-tools/hooks/plymouth failed with return 1. update-initramfs: failed for /boot/initrd.img-3.8.0-25-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) why?

  Read the article

• Recover Lost data/partition

  - by Kaleido

  This is what happened: I was running 12.04.1 and wanted to install 12.10. upgrade, but a fresh install. When setting up my computer I anticipated for this by dividing my 640GB HD in following partitions: 1. 60 GB for Ubuntu, boot 2. 576 GB for data, mountpoint /home 3. swap, 4GB The idea was to manually select the correct partition in the installer but I got distracted for a moment and selected the wrong option. Result: The installer started repartitioning the entire HD. When I noticed this I interrupted the installer, but upon reboot it was clear that I was too late, no OS to boot to. I booted from a Gparted Live CD to see if I could recover the data on my previous /home-partition, but it's gone. Is there any way to recover the lost data? I searched around and read alot about Testdisk, but in all the tutorials I've seen, the set-up has been much easier than what I'm facing. I've not only lost my partition table, it's been replaced. Thanks in advance for any ideas that might help! If extra info is needed, please specify and I will do my best to provide.

  Read the article

• How do I uninstall GRUB?

  - by ændrük

  A hard drive that I use only for data storage still has GRUB from past Ubuntu installations. How can I remove GRUB from it without harming the rest of the drive's data? Background I occasionally move the data drive between computers with various boot order configurations, so I would like it to be non-bootable in order to avoid having to accommodate it in each computer's BIOS settings. When I power on a computer while only the data drive is attached, the following appears: error: no such device: fdf38dd4-9e9d-479d-b830-2a6989958503. grub rescue> I can confirm from old backups of /etc/fstab that this was the UUID of a root partition that I recently reformatted and which no longer exists. Here's the the data drive's partition table and raw master boot record. Please note that I'm not interested in workarounds that don't answer my primary question. I can think of several ways to work around this issue, but it bothers me on principle that I don't know how to directly resolve it. Every installation procedure should have a counterpart uninstallation procedure.

  Read the article

• nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

  - by rlemon

  I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >