Search Results

Search found 22204 results on 889 pages for 'input devices'.

Page 216/889 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Is looking for Wi-Fi access points purely passive?

  - by Aric TenEyck

  Say I carry a Wi-Fi enabled phone or laptop through an area where there are WAPs. Assuming that I don't actively try to connect to them or otherwise interact with them, is it possible for the owner of that WAP to know that I was there? I'm asking this in the context of my earlier question: Looking for MACs on the network I was talking with a friend about my newfound ability to detect phones (and other devices with MAC addresses) on the network, and he pointed out that it might be useful to detect unknown phones on the network; I could use that data to track down anyone who was in my house and brought a Wi-Fi phone with them. So, if I set up a logging fake WAP with no security or encryption, can I glean any useful information about the devices that come into the house? Assuming that the thief doesn't actively try to connect...

  Read the article

• VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

  - by David Griffith

  I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

  Read the article

• PHP Form multiple buttons

  - by Ken

  I have a form with 2 buttons, that depending on which is selected will either be deleted or edited from the database. Those are each individual pages using SQL statements (questionedit and questiondelete). However, when i press a button, nothing happens...Any Ideas Here is my javascript <script type="text/javascript"> function SelectedButton(button) { if(button == 'edit') { document.testedit_questionform.action ="testedit_questionedit.php"; } else if(button == 'delete') { document.testedit_questionform.action ="testedit_questiondelete.php"; } document.forms[].testedit_questionform.submit(); } </script> Here is my form (being echoed from a loop) <form name=\"testedit_questionform\" action=\"SelectedButton\" method=\"POST\"> <span class=\"grid_11 prefix_1\" id=\"\" > Question:<input type=\"text\" name=\"QuestionText\" style=\"width:588px; margin-left:10px;\" value=\"$row[0]\"/> <input type=\"button\" value=\"Edit\" name=\"Operation\"onclick=\"submitForm(\'edit\')\" /> <input type=\"button\" value=\"Delete\" name=\"Operation\"onclick=\"submitForm(\'delete\')\" /> <input type=\"hidden\" name=\"QId\" value=\"$row[3]\" /><br />"); </form>

  Read the article

• How do I make JavaScript to set these element values?

  - by dmanexe

  I have two fields that need to multiply each other and fill a 3rd form's value. Here's the HTML: <input type="text" name="estimate[concrete][price]" value="" onBlur="calc_concreteprice(document.forms.mainform);" /> per SF <strong>times</strong> <input type="text" name="estimate[concrete][sqft]" value="" onBlur="calc_concreteprice(document.forms.mainform);" /> SF = <input type="text" name="estimate[concrete][quick_total]" value="" /> Here's my JavaScript: function calc_concreteprice(mainform) { var oprice; var ototal; oprice = ((mainform.estimate[concrete][sqft].value) * (mainform.estimate[concrete][price].value)); ototal = (oprice); mainform.estimate[concrete][quick_total].value = ototal; } I want the first two forms to be multiplied together and output to the third. I think my problem may be within how I am referencing the input field names, with brackets (I'm taking results from this form as an array so I'm already used to working with the results as a multi-dimensional array). Thanks for the help!

  Read the article

• Keyboard not dismissed

  - by sgosha

  I am developing a messaging application that have SMS.app-like UI. Conversation screen has text input field at the bottom which is moved up with keyboard. Tapping on conversation area dismisses keyboard by calling resignFirstResponder method on UITextView that we use. This usually works fine, but users report a weird bug which I can't reproduce and fix. People say that sometimes onscreen keyboard doesn't go away when they tap on conversation area, though text input field loses input focus. Once the view enters that abnormal state users are able to type with keyboard, but text that is being entered is not visible anywhere. This bug happens in one of conversation views and since then no one text input field in other views doesn't work as expected. The only way to stop this weird behavior is killing application from multitasking bar. Even more weird thing is that keyboard stays visible while navigating between view controllers in UINavigationController. I noticed two things: - if tap on ' Anyone else experiencing same problems. Any ideas on what may cause this bug?

  Read the article

• problem with jquery for add cart button

  - by jessy

  hi i have a problem with displaying amount.i have the page called make payment in this page i made three radio buttons, if i click the button that amount must add with addcart like a product. <form id='theForm'> <input type="hidden" name="totalamount" id="totalamount" value="1" /> input type="radio" name="rmr" id="payment1" value="3" onclick="updatepayment(this.value)" / input type="radio" name="rmr" id="payment2" value="5.5" onclick="updatepayment(this.value)"/ input type="radio" name="rmr" id="payment4" value="10" onclick="updatepayment(this.value)"/ div id="finalamount" /div i think that problem is my js script. if i click that button there is no response. how do i solve that problem you guys can give me any idea $(document).ready(function() { $(".cart :radio[name='rmr']").add(".cart :radio[name='rmr']").each(function() { $(this).click(function() { $(".cart :radio[name='rmr']").add(".cart :radio[name='rmr']").each(function() { $(this).attr("checked", false); }); $(this).attr("checked", true); }); }); }) function updatePayment(val) { $("").html("updatePayment(" + val + ")").appendTo(document.body); } thanks.have a nice day

  Read the article

• simple wordpress plugin with some html and javascript

  - by h_a86

  I have an html page which i have to convert to wordpress plugin. my code is simple html and javascript <html> <head> <title>Calculate</title> <script language="javascript"> function addNumbers() { var val1 = parseInt(document.getElementById("value1").value); var val2 = parseInt(document.getElementById("value2").value); var ansD = document.getElementById("answer"); ansD.value = val1 + val2; } </script> </head> <body> <input type="text" id="value1" name="value1" value="1"/> <input type="text" id="value2" name="value2" value="2"/> <input type="button" name="Sumbit" value="Click here" onclick="javascript:addNumbers()"/> <input type="text" id="answer" name="answer" value=""/> </body> </html> I know basic plugin writing skills such as <?php /* Plugin Name: Coding friends hello world Plugin URI: http://www.codingfriends.com/ Description: Outputs hello world Version: 0.1 Author: Genux Author URI: http://www.codingfriends.com License: GPL2 */ function codingfriends_helloworld() { //put you form here and javascript here } add_action('get_header', 'codingfriends_helloworld'); ?> Thanks in advance

  Read the article

• Value missing from form.fieldnames in ColdFusion

  - by Patrick McElhaney

  I must be losing my mind. <cfif cgi.request_method eq "POST"> <cfoutput> Form.fieldnames = #form.fieldnames#<br> structKeyList(form) = #structKeyList(form)# </cfoutput> </cfif> <form method="post" accept-charset="utf-8"> <input type="text" name="graduation_date" value="x"><br> <input type="text" name="foo" value="y"><br> <input type="text" name="bar" value="z"><br> <input type="submit" value="Submit Form" > </form> The form.fieldnames variable should include a list of submitted fields: foo, bar, and graduation_date. But graduation_date is missing. After a little more testing, I see that anything ending in _date is excluded from form.fieldnames. I was going to ask what's wrong with my code, but now I'm pretty convinced it's a bug in ColdFusion. (I'm on ColdFusion 8.0.1 / OS X 10.5.6.) It's a bug in ColdFusion, right?

  Read the article

• JavaScript text slideshow not working?

  - by I Build Websites

  I'm making a Javascript slideshow for my blog yet the array doesn't seem to be working. Can someone please say what I've been doing wrong <SCRIPT type="text/javascript"> var blog = new Array() blog[0]= "<h4>Sunday 17 of June 2012</h4><p title='Blog'>Donec tempus risus eget ligula viverra eget placerat odio tincidunt. Duis nisl sem, scelerisque faucibus congue vitae, accumsan at lectus. Cras vestibulum arcu ut lorem luctus eu pharetra tortor ultricies. Nam iaculis orci mauris. Etiam luctus, mauris sed adipiscing ullamcorper, augue enim volutpat sem, ut sagittis ipsum nibh ac nulla. Nam ultrices, quam eget sollicitudin porta, sapien mauris pulvinar augue, posuere hendrerit erat ligula ut magna. Maecenas laoreet nisi vitae magna consectetur a mollis purus tristique. Pellentesque elementum arcu non urna convallis eleifend. Aliquam eu lorem sed risus tempus tempor. Donec malesuada velit in odio vulputate iaculis. In tristique neque quis velit posuere adipiscing. Nullam dui neque, scelerisque non egestas feugiat, pellentesque vitae mauris.</p><hr>" and so the array continues till function display1() { document.getElementById(blogShow).innerHTML( blog[0]) } function display2() { document.getElementById(blogShow).innerHTML(blog[1]) } function display3() { document.getElementById(blogShow).innerHTML(blog[2]) } function display4() { document.getElementById(blogShow).innerHTML(blog[3]) } function display5() { document.getElementById(blogShow).innerHTML(blog[4]) } </SCRIPT> <div id="blogShow"> <SCRIPT type="text/javascript">display1()</SCRIPT> </div> <div id="blogNav"> <input type="button" onClick="display2()" value="1" class="button"> <input type="button" onClick="display3()" value="2" class="button"> <input type="button" onClick="display4()" value="3" class="button"> <input type="button" onClick="display5()" value="4" class="button"> </div> I know it's all inline and i will clean up after it works

  Read the article

• Using external SOAP service in Workflow service

  - by whirlwin

  I am using the .NET 4 framework and have made a WCF Workflow Service Application. I want to use a SOAP web service (.NET 3.5) I have running in another instance of VS. The only method that is exposed is the following: [WebMethod] public string Reverse(string input) { char[] chars = input.ToCharArray(); Array.Reverse(chars); return new string(chars); } I have used the following steps to add the service in my Workflow: Add Service Reference Provided the WSDL (the operation shows in the Operations box as expected) Clicked OK Build the solution to ensure that the service shows in my toolbox Drag the service from the toolbox into the workflow However, when I look at the properties of the service in the workflow, there is no way to specify the input argument or where to store the result of the invocation of the service. I only have the option of specifying some obscure parameters such as Body:InArgument<ReverseRequestBody and outBody:OutArgument<ReverseResponseBody (none of which are strings). Here is a screenshot depicting the properties of the service in the workflow: My question is therefore: Is it possible at all to use the SOAP service by specifying a string as the input argument (like it is meant to be used), and also assign the result to a workflow variable?

  Read the article

• Jquery passing an HTML element into a function

  - by christian

  I have an HTML form where I am going to copy values from a series of input fields to some spans/headings as the user populates the input fields. I am able to get this working using the following code: $('#source').keyup(function(){ if($("#source").val().length == 0){ $("#destinationTitle").text('Sample Title'); }else{ $("#destinationTitle").text($("#source").val()); } }); In the above scenario the html is something like: Sample Title Basically, as the users fills out the source box, the text of the is changed to the value of the source input. If nothing is input in, or the user deletes the values typed into the box some default text is placed in the instead. Pretty straightforward. However, since I need to make this work for many different fields, it makes sense to turn this into a generic function and then bind that function to each 's onkeyup() event. But I am having some trouble with this. My implementation: function doStuff(source,target,defaultValue) { if($(source).val().length == 0){ $(target).text(defaultValue); }else{ $(target).text($(source).val()); } } which is called as follows: $('#source').keyup(function() { doStuff(this, '"#destinationTitle"', 'SampleTitle'); }); What I can't figure out is how to pass the second parameter, the name of the destination html element into the function. I have no problem passing in the element I'm binding to via "this", but can't figure out the destination element syntax. Any help would be appreciated - many thanks!

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Does programmable hardware exist to allow hardware to be programmed by computers?

  - by agentbanks217

  I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build a automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)? Thanks!

  Read the article

• How to get unique value in jquery?

  - by jquerier

  I am learning jquery. I have following chunk of code in a html file: <table width="100%"> <tr> <td align='center'> <div> <a id='get_this' href='#'> <input type='hidden' id='id' value='1'><img src='images/1.gif'></a> </div> </td> <td align='center'> <div> <a id='get_this' href='#'> <input type='hidden' id='id' value='2'><img src='images/2.gif'></a> </div> </td> <td align='center'> <div> <a id='get_this' href='#'> <input type='hidden' id='id' value='3'><img src='images/3.gif'></a> </div> </td> </tr> What I want to do is, when I click any of the image, I can get the value, so that I can display the information. For example, I click the id=1, then I will display information on id1 in somewhere else. I tried this: $("a#get_this").click(function(){ var id = $('input[type=hidden]#id').val(); window.alert("You have chosen the id: " + id); }); It always return id: 1 to me.

  Read the article

• why does my <br> not work ?

  - by Vince

  I am returning a PHP array back to a JQuery call for appending into a div called "name-data". I want my array to be listed vertically, so I concatenate a br tag in the PHP however, when it gets to the HTML page the br is not being rendered, it just comes out as text. I have tried the various forms of br all without luck. I am new to JQuery - What am I doing wrong ? Many Thanks ! PHP: $result = mysqli_query($con,"SELECT FirstName FROM customer limit 5"); while($row = mysqli_fetch_array($result)) { echo $row['FirstName']."<br />"; } JQuery: $('input#name-submit').on('click',function(){ var name = $('input#name').val(); if($.trim(name) !=''){ $.post('search.php',{name:name}, function(data){ $('div#name-data').text(data); }); } }); HTML Name:<input type="text" id="name"> <input type="submit" id="name-submit" value="grab"> <div id="name-data"> </div>

  Read the article

• Javascript autocomplete function href

  - by user896692

  I´ve the following javascript-function: <script type="text/javascript"> $(function() { var data = (<?php include("php/search_new.php"); ?>).Data.Recipes; var source = []; for (var i in data) { source.push({"href": "/php/get_recipe_byID.php?id=" + data[i].ID, "label": data[i].TITLE}); } $("#searchrecipes").autocomplete({ minLength: 3, source: source, select: function(event, ui) { window.location.href = ui.item.href; } }); }); </script> <input id="searchrecipes" type="text" name="searchrecipes" style="margin-left: 850px; margin-top: 0px; width:170px; background: #fff url(images/search_icon.png) no-repeat 100%;" onblur="this.style.background='#ffffff'; background: #fff url(images/search_icon.png) no-repeat 100%;" onfocus="this.style.background='#c40606'; background: url(images/search_icon.png) no-repeat 100%;" placeholder="Suchen..."></input> <input type="submit" name="buttonsenden" style="display:none;" value="" width: 5px></input> The function has already worked but suddenly it stopped working. The problem is, that the href on the dropdown-autocomplete isn´t clickable. var data = ({"Data":{"Recipes":{"Recipe_5":{"ID":"5","TITLE":"Spaghetti Bolognese"},"Recipe_7":{"ID":"7","TITLE":"Wurstel"},"Recipe_9":{"ID":"9","TITLE":"Schnitzel"},"Recipe_10":{"ID":"10","TITLE":null},"Recipe_19":{"ID":"19","TITLE":null},"Recipe_20":{"ID":"20","TITLE":"Hundefutter"},"Recipe_26":{"ID":"26","TITLE":"Apfelstrudel"},"Recipe_37":{"ID":"37","TITLE":null},"Recipe_38":{"ID":"38","TITLE":"AENDERUNG"},"Recipe_39":{"ID":"39","TITLE":null},"Recipe_40":{"ID":"40","TITLE":"Schnitzel"},"Recipe_42":{"ID":"42","TITLE":"Release-Test"},"Recipe_43":{"ID":"43","TITLE":"Wurstel2"}}},"Message":null,"Code":200}).Data.Recipes; All the necessary jquery scripts are available. What can be the problem?

  Read the article

• Cannot Ping PS3 Using a Wired Connection

  - by Post

  PS3 is using the inbuilt wireless network adapter (I cannot change this) When I try to ping the PS3 from ANY computer which is on a wired ethernet connection, I get Request Timed Out errors. Whenever I ping from a computer with a wireless connection, it works just fine. To be clear: Pinging from Wireless PC to Wireless PS3 works Pinging from Wired PC to Wireless PS3 fails I have tried this on several PC's and Laptops all with the same results. As an attempted solution I have set up static IP's on all related devices. More information: Default Gateway = 192.168.2.1 PS3(wireless) = 192.168.2.100 PC(wired) = 192.168.2.99 Subnet Mask(for both devices, I have made sure) = 255.255.255.0 Thanks

  Read the article

• Simple C++ code (what's wrong here?)

  - by JW

  Noob to C++. I'm trying to get user input (Last Name, First Name Middle Name), change part of it (Middle Name to Middle Initial) and then rearrange it (First Middle Initial Last). Where am I messing up in my code? --Thanks for ANY help you can offer! ... #include <iostream> using std::cout; using std::cin; #include <string> using std::string; int main() { string myString, last, first, middle; cout << "Enter your name: Last, First Middle"; cin >> last >> first >> middle; char comma, space1, space2; comma = myString.find_first_of(','); space1 = myString.find_first_of(' '); space2 = myString.find_last_of(' '); last = myString.substr (0, comma); // user input last name first = myString.substr (space1+1, -1); // user input first name middle = myString.substr (space2+1, -1); // user input middle name middle.insert (0, space2+1); // inserts middle initial in front of middle name middle.erase (1, -1); // deletes full middle name, leaving only middle initial myString = first + ' ' + middle + ' ' + last; // return 0; }

  Read the article

• How to retain the value of a text box?

  - by udaya

  This is the content on my view page and i want to replace the value from "0" when the monthfunc() is called...the monthfunc() is given below the view content <tr> <td> <input type="submit" name="monthplus" id="monthplus" onClick="return monthfunc('monthplus');" value=">>>>>>"> <input type="hidden" name="monthnum" id="monthnum" value="1"> <input type="text" name="monthname" id="monthname" value="0" value="<? echo $month;?>" > <input type="submit" name="monthminus" id="monthminus" onClick="return monthfunc('monthminus');" value="<<<<<<"> </td> </tr> My script is function monthfunc(mnth) { if(mnth == 'monthplus') { var yn = document.getElementById('monthnum').value; ynpo = parseInt(yn)+1; if(ynpo==13) { ynpo=1; } } else if(mnth == 'monthminus') { var yn = document.getElementById('monthnum').value; ynpo = parseInt(yn)-1; if(ynpo==0) { ynpo=12; } } if(ynpo ==1) { document.getElementById('monthname').value = 'january'; document.getElementById('monthnum').value = ynpo; return true; } else if(ynpo ==2) { document.getElementById('monthname').value = 'february'; document.getElementById('monthnum').value = ynpo; return true; } else if(ynpo ==3) { document.getElementById('monthname').value = 'March'; document.getElementById('monthnum').value = ynpo; return true; } return false; } How can i replace The value with the value like january february etc.. Actually i can change the values but cannot retain the values... i want to retain the values ,,,How to do that

  Read the article

• Javascript access object variables from functions

  - by Parhs

  function init_exam_chooser(id,mode) { this.id=id; this.table=$("#" + this.id); this.htmlRowOrder="<tr>" + $("#" + this.id + " tbody tr:eq(0)").html() + "</tr>"; this.htmlRowNew="<tr>" + $("#" + this.id + " tbody tr:eq(1)").html() + "</tr>"; $("#" + this.id + " tbody tr").remove(); //Arxikopoiisi var rowNew=$(this.htmlRowNew); rowNew.find("input[type='text']").eq(0).autocomplete({ source: function (req,resp) { $.ajax({ url: "/medilab/prototypes/exams/searchQuick", cache: false, dataType: "json", data:{codeName:req.term}, success: function(data) { resp(data); } }); }, focus: function(event,ui) { return false; }, minLength :2 }); rowNew.find("input[type='text']").eq(1).autocomplete({ source: function (req,resp) { $.ajax({ url: "/medilab/prototypes/exams/searchQuick", cache: false, dataType: "json", data:{name:req.term}, success: function(data) { resp(data); } }); }, focus: function(event,ui) { return false; }, minLength :2 }); rowNew.find("input[type='text']").bind( "autocompleteselect", function(event, ui) { alert(htmlRowOrder); var row=$(htmlRowOrder); $(table).find("tbody tr:last").before(row); alert(ui.item.id); }); rowNew.appendTo($(this.table).find("tbody")); //this.htmlRowNew } The problem is at ,how i can access htmlRowOrder? I tried this.htmlRowOrder and didnt work.... Any ideas?? rowNew.find("input[type='text']").bind( "autocompleteselect", function(event, ui) { alert(htmlRowOrder); var row=$(htmlRowOrder); $(table).find("tbody tr:last").before(row); alert(ui.item.id); });

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• Multiple forms + HAML + jQuery + Javascript submit

  - by Jay Godse

  Hi. I have a HAML page that lists some links to delete "things" that looks like this %div %a.form_submit Delete Thing 1 %form{:href=>"#", :id=>'comment_1', :method=>'post', :action=>'/thing/delete'} %input{:type=>'hidden', :name=>'thingid', :value=>'1'} %input{:type=>'submit', style='display:none'} %div %a.form_submit Delete Thing 22 %form{:href=>"#", :id=>'comment_22', :method=>'post', :action=>'/thing/delete'} %input{:type=>'hidden', :name=>'thingid', :value=>'22'} %input{:type=>'submit', style='display:none'} The intention is to have a link "Delete XX" which will delete something specific. A page could have a number of these links, and each link is for a specific "thing". I also have a piece of (unobtrusive) jQuery javascript that adds a click handler to each form as follows: $('a.form_submit').click(function(event) { $('form').submit(); event.preventDefauilt(); }); This works when there is one form on a page. However, if I have more than one form on a page, how do I ensure that clicking "Delete Thing 1" will trigger a submit() event only on the form with id='comment_1'?

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• How to further improve error messages in Scala parser-combinator based parsers?

  - by rse

  I've coded a parser based on Scala parser combinators: class SxmlParser extends RegexParsers with ImplicitConversions with PackratParsers { [...] lazy val document: PackratParser[AstNodeDocument] = ((procinst | element | comment | cdata | whitespace | text)*) ^^ { AstNodeDocument(_) } [...] } object SxmlParser { def parse(text: String): AstNodeDocument = { var ast = AstNodeDocument() val parser = new SxmlParser() val result = parser.parseAll(parser.document, new CharArrayReader(text.toArray)) result match { case parser.Success(x, _) => ast = x case parser.NoSuccess(err, next) => { tool.die("failed to parse SXML input " + "(line " + next.pos.line + ", column " + next.pos.column + "):\n" + err + "\n" + next.pos.longString) } } ast } } Usually the resulting parsing error messages are rather nice. But sometimes it becomes just sxml: ERROR: failed to parse SXML input (line 32, column 1): `"' expected but `' found ^ This happens if a quote characters is not closed and the parser reaches the EOT. What I would like to see here is (1) what production the parser was in when it expected the '"' (I've multiple ones) and (2) where in the input this production started parsing (which is an indicator where the opening quote is in the input). Does anybody know how I can improve the error messages and include more information about the actual internal parsing state when the error happens (perhaps something like a production rule stacktrace or whatever can be given reasonably here to better identify the error location). BTW, the above "line 32, column 1" is actually the EOT position and hence of no use here, of course.

  Read the article

• IE and replaceWith not preserving radio button state

  - by copelco

  Hello, I've run into an issue regarding replaceWith not maintaining the state of a moved radio button input. I've prepared a simple example illustrating this issue. This works in FF and Chrome, but not IE. Is there a way around this? Thanks! jsbin: http://jsbin.com/unola4/2 code: <html> <head> <script class="jsbin" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <title>IE replaceWith issue</title> <script type='text/javascript'> $(function(){ $('a').click(function(e) { e.preventDefault(); $('#temp').replaceWith($('#window').children()); }); }); </script> </head> <body> <a href='#'>run replaceWith</a> <p>Select a radio button and then click "run replaceWith". The value persists in FF, but not IE.</p> <div id='window' style='background-color: #DDD; height: 100px;'> <input id="id_received_date-days_0" type="radio" name="received_date-days" value="30" /> <input id="id_received_date-days_1" type="radio" name="received_date-days" value="50" /> <input type='text' name='test-test' /> </div> <br /> <form id='foo' style='background-color: #EEE'> <div id='temp'></div> </form> </body> </html>

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >