Search Results

Search found 27932 results on 1118 pages for 'finite state machine'.

Page 218/1118 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• Bad request - Invalid Hostname Error when using ARR IP address

  - by syloc

  I'm trying to setup a simple ARR system. I have 1 ARR machine load balancing between 2 APP servers. I can reach the app sites if i use the server name of the ARR machine. (http://arrserver/app) But i can't do it with its IP address. (http://10.7.10.25/app). It gives the "Bad Request - Invalid Hostname". In the ARR machine i configured the default site's bindings to "All Unassigned","80" (default values). Do i need to change the binding rule or need additional url rewrite rules? And also, in the ARR server http://127.0.0.1/app doesn't work. But http://localhost/app works fine. Thx in advance

  Read the article

• Snow Leopard connecting to Unbuntu 10.04 through Samba failure -- need help fixing.

  - by Chris Altman

  I have a Ubuntu 10.04 web server. I want to connect to it with my OSX 10.6 machine and Finder. I have installed openSSH and Samba on the Ubuntu machine. In my smb.conf I have a Share Definition: [www] comment = Development Computer WWW path = /var/www writeable = yes browseable = yes allow hosts = 192.168.1. I can connect to the machine through Finder using a non-root user. When I attempt to add files thought Finder I get an "Insufficient Permissions" error. Please help. I am not sure if the issue is in the Samba configuration or OSX 10.6 Thank you

  Read the article

• Gmail flagging emails as spam despite SPF being enabled and working perfectly

  - by Asif

  I have a website where people can recommend contents to their friends using their email. The issue is that emails are being flagged as spam whereas if I do the same from my development machine things are working out fine. I have enabled SPF and it is perfect. When sending through website, the email appears as this in Gmail Inbox: From [email protected] to [email protected]. When I send it from my development machine it appears as : From xyz.com via mywebsite.com to [email protected] mailed by mywebsite.com and this is exactly how I envisioned it. From what little I could figure out by looking at the source of emails in Gmail is that when sending from my development machine Gmail correctly recognizes my domain as mywebsite.com for which SPF is enabled and hence it treats it as genuine email. Whereas Gmail recognizes my domain as [email protected] when sent through the website. Can someone tell me why it does so? Any help would be really appreciated.

  Read the article

• Adding Thunderbird-stable repository gives "can't find signing_key_fingerprint" error

  - by EBV2010

  I'm trying to install Thunderbird 11 on Kubuntu 10.04. I was able to do it on the machine I'm working on. To get a clean process that I can roll out to other clients, I re-installed the machine and repeated the process. This is what I did (I've left out the sudo for clarity): add-apt-repository ppa:ubuntu-mozilla-security/ppa apt-get update add-apt-repository ppa:mozilla-team/thunderbird-stable The last one resulted in this error: Error: can't find signing_key_fingerprint at https://launchpad.net/api/1.0/~mozilla-team/+archive/thunderbird-stable The machine as it was before re-installation gave no such message. It was built from the same sources. Bottomline: I got Thunderbird 11.0 to run on Kubuntu 10.04 but after re-installation, adding the repository gives an error and won't add. Is there a way to solve the signing_key_fingerprint error?

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to factory defaults?

  - by Solignis

  I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• See network computer description in Explorer

  - by John Gardeniers

  When viewing the list of network computers in Windows Explorer on a Win 7 machine there appears to be no way of readily seeing the description field, which makes that pretty well useless. I believe this problem started with Vista but I'm seeing it for the first time because I was fortunate enough to skip over Vista. We're currently rolling out Win 7 on new boxes and although I'm changing the naming system to something more sensible, the old boxes have names such as FWS01, FWS02, etc. Managing a network of computers with such names is made more difficult when you can't readily see who's machine each one is. Googling the problem brought up a workaround involving creating a shortcut on an XP machine and copying that to the Win 7 box but that's a long way from ideal. Is there some kind of hack that can be applied to machines, the operator of which needs to be able to see the description field?

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• iptables: built-in INPUT chain in nat table?

  - by ughmandaem

  I have a Gentoo Linux system running linux 2.6.38-rc8. I also have a machine running Ubuntu with linux 2.6.35-27. I also have a virtual machine running Debian Unstable with linux 2.6.37-2. On the Gentoo and Debian systems I have an INPUT chain built into my nat table in addition to PREROUTING, OUTPUT, and POSTROUTING. On Ubuntu, I only have PREROUTING, OUTPUT, and POSTROUTING. I am able to use this INPUT chain to use SNAT to modify the source of a packet that is destined to the local machine (imagine simulating an incoming spoofed IP to a local application or just to test a virtual host configuration). This is possible with 2 firewall rules on Gentoo and Debian but seemingly not so on Ubuntu. I looked around for documentation on changes to the SNAT target and the INPUT chain of the nat table and I couldn't find anything. Does anyone know if this is a configuration issue or is it something that was just added in more recent versions of linux?

  Read the article

• "static" as a semantic clue about statelessness?

  - by leoger

  this might be a little philosophical but I hope someone can help me find a good way to think about this. I've recently undertaken a refactoring of a medium sized project in Java to go back and add unit tests. When I realized what a pain it was to mock singletons and statics, I finally "got" what I've been reading about them all this time. (I'm one of those people that needs to learn from experience. Oh well.) So, now that I'm using Spring to create the objects and wire them around, I'm getting rid of static keywords left and right. (If I could potentially want to mock it, it's not really static in the same sense that Math.abs() is, right?) The thing is, I had gotten into the habit of using static to denote that a method didn't rely on any object state. For example: //Before import com.thirdparty.ThirdPartyLibrary.Thingy; public class ThirdPartyLibraryWrapper { public static Thingy newThingy(InputType input) { new Thingy.Builder().withInput(input).alwaysFrobnicate().build(); } } //called as... ThirdPartyLibraryWrapper.newThingy(input); //After public class ThirdPartyFactory { public Thingy newThingy(InputType input) { new Thingy.Builder().withInput(input).alwaysFrobnicate().build(); } } //called as... thirdPartyFactoryInstance.newThingy(input); So, here's where it gets touchy-feely. I liked the old way because the capital letter told me that, just like Math.sin(x), ThirdPartyLibraryWrapper.newThingy(x) did the same thing the same way every time. There's no object state to change how the object does what I'm asking it to do. Here are some possible answers I'm considering. Nobody else feels this way so there's something wrong with me. Maybe I just haven't really internalized the OO way of doing things! Maybe I'm writing in Java but thinking in FORTRAN or somesuch. (Which would be impressive since I've never written FORTRAN.) Maybe I'm using staticness as a sort of proxy for immutability for the purposes of reasoning about code. That being said, what clues should I have in my code for someone coming along to maintain it to know what's stateful and what's not? Perhaps this should just come for free if I choose good object metaphors? e.g. thingyWrapper doesn't sound like it has state indepdent of the wrapped Thingy which may itself be mutable. Similarly, a thingyFactory sounds like it should be immutable but could have different strategies that are chosen among at creation. I hope I've been clear and thanks in advance for your advice!

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• How to get Hyper-V to recognize that a VM isn't stopping, it's stopped.

  - by Matt Burke

  I have a Hyper-V virtual machine that has some problems. First, its settings are apparently corrupt: The WMI object contained an invalid value in property BIOSNumLock. The WMI object contained an invalid value in property AutomaticStartupAction. Second, I saw something that implied that I could toggle the NumLock checkbox on the BIOS property page to fix the first problem, but the checkbox didn't show up. So I connected to the VM and shut it down. Now (many hours later) Hyper-V claims that the VM is "Stopping". However, when I follow the interweb's directions on forcing a VM offline (i.e. find vmwp and kill it), I can't find vmwp. The VM's WMI object has a PID that doesn't exist, and none of the vmwp processes have this machine's GUID. So, how do I trick Hyper-V into seeing that the machine is offline (or letting me delete it)?

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• How to identify process that's sending error messages to terminal?

  - by kjo

  The following error message occasionally appears in my terminal: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory ...which is pretty annoying. I have searched online for solutions to this error, without success. Is there any way to at least identify the process responsible for sending these error messages to my terminal? EDIT: Let me clarify that, as far as I can tell, these error messages appear "out of the blue". In fact, they appear asynchronously with respect to my interactions with the terminal (more often than not see them for the first time when I return to a terminal window that has been unattended for some time). I'm sure there's a definite, deterministic cause for these messages, but it is not one that I can readily identify. In short, I have not noticed any pattern or regularity to their occurrence. In particular, in my case their occurrence has nothing to do with running mplayer, or any other video playback program. (Please my earlier post about it here.) For one thing, the machine in question is a work machine, and I rarely watch any videos with it. In the very few instances in which I've watched a video on this machine I've used VLC, not mplayer, and these errors never appeared in these rare occasions that I used VLC.

  Read the article

• Trouble with resolving hostnames on CentOS using Bind

  - by cabaret

  I'm taking a course on server administration at school and I have managed to set up virtual hosting in apache and a dns server on a virtual machine. However, I have now set up an old pc to run CentOS and I'm trying the same on that box. The problem I ran into now is that I can't resolve hostnames from the linux box. I have set up the nameserver in /etc/resolv.conf to the IP of the CentOS machine, but when I try for example ping google.com I get ping: unknown host google.com However, when I do ping 66.102.13.105 (which is the Google IP, figured that out by pinging on my mac) I get: PING 66.102.13.105 (66.102.13.105) 56(84) bytes of data. 64 bytes from 66.102.13.105: icmp_seq=1 ttl=52 time=15.5 ms Slightly confused why this is happening. Could it be because of my router sitting in between the linux machine and the cable modem? It's a D-Link somethingsomething. Thanks in advance

  Read the article

• How to write a network game?

  - by TomWij

  Based on Why is so hard to develop a MMO?: Networked game development is not trivial; there are large obstacles to overcome in not only latency, but cheat prevention, state management and load balancing. If you're not experienced with writing a networked game, this is going to be a difficult learning exercise. I know the theory about sockets, servers, clients, protocols, connections and such things. Now I wonder how one can learn to write a network game: How to balance load problems? How to manage the game state? How to keep things synchronized? How to protect the communication and client from reverse engineering? How to work around latency problems? Which things should be computed local and which things on the server? ... Are there any good books, tutorials, sites, interesting articles or other questions regarding this? I'm looking for broad answers, but specific ones are fine too to learn the difference.

  Read the article

• setting up ssh on minix 3.2

  - by Mark

  I have install MINIX 3.20 on VMware player on LINUX. Now, I am trying to ssh into Minix from the same Linux machine, but I am encountering some problems. First I installed openssh on MINIx then I tried to ssh onto the Minix virtual machine with ssh [email protected] but I got the following output: [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied (publickey,password,keyboard-interactive). I am sure the password I entered is correct, I have tried to ssh into MINIX on MINIX and it worked but not when I tried it from my linux machine. I have followed the steps for setting up ssh from this webpage, but it didn't work as shown above.

  Read the article

• Can you shrink the sparse disk image of a Mac OS X guest OS in VMWare Fusion?

  - by Paul D. Waite

  I use VMWare Fusion on my Mac to run a virtual Windows 7 machine, and the Microsoft IE compatibility Windows XP virtual machines. In VMWare Tools on the Windows guest OSes, there’s a “Shrink” option that lets you reduce the size of the sparse disk image used by the guest OS, to save hard drive space on your host OX. I’ve recently created another virtual machine, this time running Snow Leopard Server. I was wondering if I could shrink the spare disk image used by this machine too, but I can’t find a VMWare Tools app on the Mac guest OS, even though VMWare Tools have been installed (as VMWare’s Shared Folders feature is working). Is there any way to shrink the sparse disk image used by Mac OS X guest OSes in VMWare Fusion?

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• How can I make a 32 bit render target with a 16 bit alpha channel in DirectX?

  - by J Junker

  I want to create a render target that is 32-bit, with 16 bits each for alpha and luminance. The closest surface formats I can find in the DirectX SDK are: D3DFMT_A8L8 // 16-bit using 8 bits each for alpha and luminance. D3DFMT_G16R16F // 32-bit float format using 16 bits for the red channel and 16 bits for the green channel. But I don't think either of these will work, since D3DFMT_A8L8 doesn't have the precision and D3DFMT_G16R16F doesn't have an alpha channel (I need a separate blend state for alpha). How can I create a render target that allows a separate blend state for luminance and alpha, with 16 bit precision on each channel, that doesn't exceed 32 bits per pixel?

  Read the article

• Understanding Application binary interface (ABI)

  - by Tim

  I am trying to understand the concept of Application binary interface (ABI). From The Linux Kernel Primer: An ABI is a set of conventions that allows a linker to combine separately compiled modules into one unit without recompilation, such as calling conventions, machine interface, and operating-system interface. Among other things, an ABI defines the binary interface between these units. ... The benefits of conforming to an ABI are that it allows linking object files compiled by different compilers. From Wikipedia: an application binary interface (ABI) describes the low-level interface between an application (or any type of) program and the operating system or another application. ABIs cover details such as data type, size, and alignment; the calling convention, which controls how functions' arguments are passed and return values retrieved; the system call numbers and how an application should make system calls to the operating system; and in the case of a complete operating system ABI, the binary format of object files, program libraries and so on. I was wondering whether ABI depends on both the instruction set and the OS. Are the two all that ABI depends on? What kinds of role does ABI play in different stages of compilation: preprocessing, conversion of code from C to Assembly, conversion of code from Assembly to Machine code, and linking? From the first quote above, it seems to me that ABI is needed for only linking stage, not the other stages. Is it correct? When is ABI needed to be considered? Is ABI needed to be considered during programming in C, Assembly or other languages? If yes, how are ABI and API different? Or is it only for linker or compiler? Is ABI specified for/in machine code, Assembly language, and/or of C?

  Read the article

• Boot to VHD backup plan

  - by Josh Barker

  I have a machine that I just reinstalled Windows and all of my applications onto... what a chore that is. I want to totally and completely avoid this from now on by creating an image. My first thought was to see if it possible to copy a VHD file when you are booted into it since I am using Windows 7 Ultimate as boot-to-vhd (without a parent machine). Is this possible and if so, how could I accomplish this? Keep in mind, this is my personal machine and I'm trying to keep things inexpensive (a good script would work). Thanks, Josh

  Read the article

• Connecting to a computer using Remote Desktop does not work first time

  - by dev

  Hi all, I'm having a weird sort of problem with Remote desktop and that too, only on one machine. If I boot up this machine, and then try to Remote desktop into it, it does not work.( I get the following error: The client could not connect to the remote computer. Remote connections might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are preventing your connection. Please try connecting again later. If the problem continues to occur, contact your administrator. ) But if I physically log into it & then log out, and then try to Remote desktop into it, it works flawlessly. The problematic machine is Xp 64 Bit, but other systems with Xp 64 Bit work fine. Any Ideas on how to solve this?

  Read the article

• Have OS X send wake on lan before printing to shared printer

  - by Dean Hill

  I have a MacBook that prints to a shared Windows 7 printer. Sometimes the Windows machine is asleep, and the Mac will just queue up its print requests. I recently created a script to send a wake-on-lan packet to a Windows 7 machine. This wakes up the Windows machine and printing starts. Great, but I think the system can be automated en Is it possible to have the MacBook run the wake-on-lan script everytime something is printed? Stated more generally, can I have the OS X print subsystem execute a script everytime something is printed?

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >