Search Results

Search found 12790 results on 512 pages for 'port islander 2009'.

Page 218/512 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• How to match responses from a server with their corresponding requests? [closed]

  - by Deele

  There is a server that responds to requests on a socket. The client has functions to emit requests and functions to handle responses from the server. The problem is that the request sending function and the response handling function are two unrelated functions. Given a server response X, how can I know whether it's a response to request X or some other request Y? I would like to make a construct that would ensure that response X is definitely the answer to request X and also to make a function requestX() that returns response X and not some other response Y. This question is mostly about the general programming approach and not about any specific language construct. Preferably, though, the answer would involve Ruby, TCP sockets, and PHP. My code so far: require 'socket' class TheConnection def initialize(config) @config = config end def send(s) toConsole("--> #{s}") @conn.send "#{s}\n", 0 end def connect() # Connect to the server begin @conn = TCPSocket.open(@config['server'], @config['port']) rescue Interrupt rescue Exception => detail toConsole('Exception: ' + detail.message()) print detail.backtrace.join('\n') retry end end def getSpecificAnswer(input) send "GET #{input}" end def handle_server_input(s) case s.strip when /^Hello. (.*)$/i toConsole "[ Server says hello ]" send "Hello to you too! #{$1}" else toConsole(s) end end def main_loop() while true ready = select([@conn, $stdin], nil, nil, nil) next if !ready for s in ready[0] if s == $stdin then return if $stdin.eof s = $stdin.gets send s elsif s == @conn then return if @conn.eof s = @conn.gets handle_server_input(s) end end end end def toConsole(msg) t = Time.new puts t.strftime("[%H:%M:%S]") + ' ' + msg end end @config = Hash[ 'server'=>'test.server.com', 'port'=>'2020' ] $conn = TheConnection.new(@config) $conn.connect() $conn.getSpecificAnswer('itemsX') begin $conn.main_loop() rescue Interrupt rescue Exception => detail $conn.toConsole('Exception: ' + detail.message()) print detail.backtrace.join('\n') retry end

  Read the article

• Iptables working strangely

  - by user109985

  I have Ubuntu 12.04 x64 installed in my laptop. I'm quite new to linux, and I wanted to specify certain rules for the iptables firewall. This is the saved config of my iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -p tcp -m tcp --dport 3306 -j DNAT --to-destination 192.168.1.100:3306 -A PREROUTING -p tcp -m tcp --dport 11002 -j DNAT --to-destination 192.168.1.100:11002 -A PREROUTING -p tcp -m tcp --dport 13000 -j DNAT --to-destination 192.168.1.100:13000 -A PREROUTING -p tcp -m tcp --dport 13001 -j DNAT --to-destination 192.168.1.100:13001 -A PREROUTING -p tcp -m tcp --dport 13002 -j DNAT --to-destination 192.168.1.100:13002 -A PREROUTING -p tcp -m tcp --dport 13003 -j DNAT --to-destination 192.168.1.100:13003 -A PREROUTING -p tcp -m tcp --dport 13004 -j DNAT --to-destination 192.168.1.100:13004 -A PREROUTING -p tcp -m tcp --dport 13061 -j DNAT --to-destination 192.168.1.100:13061 -A PREROUTING -p tcp -m tcp --dport 13099 -j DNAT --to-destination 192.168.1.100:13099 -A POSTROUTING -j MASQUERADE COMMIT *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT COMMIT In theory, what it does is to drop all connections in all ports except for http, mysql and few other ports. Moreover, it redirects all mysql and 13000-13004..etc port connections to a specific local ip in the same port, which is 192.168.1.100. But what I find strange is that when my firewall is active, it blocks absolutely all the input connections, even those which must not block (http, mysql). In fact, I'm literally blocked and I can't establish any external connection. What am I doing wrong? PS: I tested the firewall without those redirections, and it still block all inputs, so I suppose it's not the problem.

  Read the article

• "(401)Authorization Required" when making a web service call using Axis

  - by Arun P Johny

  Hi, I'm using apache axis to connect to my sugar crm instance. When I'm trying to connect to the instance it is throwing the following exception Exception in thread "main" AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (401)Authorization Required faultActor: faultNode: faultDetail: {}:return code: 401 &lt;!DOCTYPE HTML PUBLIC &quot;-//IETF//DTD HTML 2.0//EN&quot;&gt; &lt;html&gt;&lt;head&gt; &lt;title&gt;401 Authorization Required&lt;/title&gt; &lt;/head&gt;&lt;body&gt; &lt;h1&gt;Authorization Required&lt;/h1&gt; &lt;p&gt;This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.&lt;/p&gt; &lt;/body&gt;&lt;/html&gt; {http://xml.apache.org/axis/}HttpErrorCode:401 (401)Authorization Required at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:744) at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) at org.beanizer.sugarcrm.SugarsoapBindingStub.get_server_info(SugarsoapBindingStub.java:1115) at com.greytip.sugarcrm.GreytipCrm.main(GreytipCrm.java:42) This basically says that I do not have the authorization to the resource. The same code is working fine in my testing environment. Sugarsoap service = new SugarsoapLocator(); SugarsoapPortType port = service.getsugarsoapPort(new java.net.URL( SUGAR_CRM_LOCATION + "/soap.php")); System.out.println(port.get_server_info().getVersion()); User_auth userAuth = new User_auth(); userAuth.setUser_name("user_name"); MessageDigest md = MessageDigest.getInstance("MD5"); String password = getHexString(md.digest("password".getBytes())); userAuth.setPassword(password); // userAuth.setVersion("0.1"); Entry_value login = port.login(userAuth, "myAppName", null); String sessionID = login.getId(); Above code is used to connect to the Sugar CRM installation. here line "System.out.println(port.get_server_info().getVersion());" is throwing the exception. One difference I noticed between the test and production environment is when I used the soap url in the browser the production site pops up a 'Authentication Required' popup. When I gives my proxy username and password in this popup, it shows the soap request details. The same is applicable for the login url also. First it will ask for the 'Authentication' then it will take to the sugar crm login page? Is it a server security setting? If it is then how to set this user name and password using java in a web service call. The authentication required popup is same as the one which comes when we try to access the tomcat manager through a browser. Thanks

  Read the article

• Mercurial hg clone on Windows via ssh with copSSH issue

  - by Kyle Tolle

  I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

  Read the article

• HTTP error code 405: tomcat Url mapping issue

  - by Andrew

  I am having trouble POSTing to my java HTTPServlet. I am getting "HTTP Status 405 - HTTP method GET is not supported by this URL" from my tomcat server". When I debug the servlet the login method is never called. I think it's a url mapping issue within tomcat... web.xml <servlet-mapping> <servlet-name>faxcom</servlet-name> <url-pattern>/faxcom/*</url-pattern> </servlet-mapping> FaxcomService.java @Path("/rest") public class FaxcomService extends HttpServlet{ private FAXCOM_x0020_ServiceLocator service; private FAXCOM_x0020_ServiceSoap port; @GET @Produces("application/json") public String testGet() { return "{ \"got here\":true }"; } @POST @Path("/login") @Consumes("application/json") // @Produces("application/json") public Response login(LoginBean login) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(10); try { service = new FAXCOM_x0020_ServiceLocator(); service.setFAXCOM_x0020_ServiceSoapEndpointAddress("http://cd-faxserver/faxcom_ws/faxcomservice.asmx"); service.setMaintainSession(true); // enable sessions support port = service.getFAXCOM_x0020_ServiceSoap(); rm.add(new ResultMessageBean(port.logOn( "\\\\CD-Faxserver\\FaxcomQ_API", /* path to the queue */ login.getUserName(), /* username */ login.getPassword(), /* password */ login.getUserType() /* 2 = user conf user */ ))); } catch (RemoteException e) { e.printStackTrace(); } catch (ServiceException e) { e.printStackTrace(); } // return rm; return Response.status(201).entity(rm).build(); } @POST @Path("/newFaxMessage") @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) public ArrayList<ResultMessageBean> newFaxMessage(FaxBean fax) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(); try { rm.add(new ResultMessageBean(port.newFaxMessage( fax.getPriority(), /* priority: 0 - low, 1 - normal, 2 - high, 3 - urgent */ fax.getSendTime(), /* send time */ /* "0.0" - immediate */ /* "1.0" - offpeak */ /* "9/14/2007 5:12:11 PM" - to set specific time */ fax.getResolution(), /* resolution: 0 - low res, 1 - high res */ fax.getSubject(), /* subject */ fax.getCoverpage(), /* cover page: "" – default, “(none)� – no cover page */ fax.getMemo(), /* memo */ fax.getSenderName(), /* sender's name */ fax.getSenderFaxNumber(), /* sender's fax */ fax.getRecipients().get(0).getName(), /* recipient's name */ fax.getRecipients().get(0).getCompany(), /* recipient's company */ fax.getRecipients().get(0).getFaxNumber(), /* destination fax number */ fax.getRecipients().get(0).getVoiceNumber(), /* recipient's phone number */ fax.getRecipients().get(0).getAccountNumber() /* recipient's account number */ ))); if (fax.getRecipients().size() > 1) { for (int i = 1; i < fax.getRecipients().size(); i++) rm.addAll(addRecipient(fax.getRecipients().get(i))); } } catch (RemoteException e) { // TODO Auto-generated catch block e.printStackTrace(); } return rm; } } Main.java private static void main(String[] args) { try { URL url = new URL("https://andrew-vm/faxcom/rest/login"); HttpURLConnection conn = (HttpURLConnection) url.openConnection(); conn.setRequestMethod("POST"); conn.setDoOutput(true); conn.setRequestProperty("Content-Type", "application/json"); FileInputStream jsonDemo = new FileInputStream("login.txt"); OutputStream os = (OutputStream) conn.getOutputStream(); os.write(IOUtils.toByteArray(jsonDemo)); os.flush(); if (conn.getResponseCode() != 200) { throw new RuntimeException("Failed : HTTP error code : " + conn.getResponseCode()); } BufferedReader br = new BufferedReader(new InputStreamReader( (conn.getInputStream()))); String output; System.out.println("Output from Server .... \n"); while ((output = br.readLine()) != null) { System.out.println(output); } // Don't want to disconnect - servletInstance will be destroyed // conn.disconnect(); } catch (MalformedURLException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } } I am working from this tutorial: http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/

  Read the article

• CURL - HTTPS Wierd error

  - by Vincent

  All, I am having trouble requesting info from HTTPS site using CURL and PHP. I am using Solaris 10. It so happens that sometimes it works and sometimes it doesn't. I am not sure what is the cause. If it doesn't work, this is the entry recorded in the verbose log: * About to connect() to 10.10.101.12 port 443 (#0) * Trying 10.10.101.12... * connected * Connected to 10.10.101.12 (10.10.101.12) port 443 (#0) * error setting certificate verify locations, continuing anyway: * CAfile: /etc/opt/webstack/curl/curlCA CApath: none * error:80089077:lib(128):func(137):reason(119) * Closing connection #0 If it works, this is the entry recorded in the verbose log: * About to connect() to 10.10.101.12 port 443 (#0) * Trying 10.10.101.12... * connected * Connected to 10.10.101.12 (10.10.101.12) port 443 (#0) * error setting certificate verify locations, continuing anyway: * CAfile: /etc/opt/webstack/curl/curlCA CApath: none * SSL connection using DHE-RSA-AES256-SHA * Server certificate: * subject: C=CA, ST=British Columnbia, L=Vancouver, O=google, OU=FDN, CN=g.googlenet.com, [email protected] * start date: 2007-07-24 23:06:32 GMT * expire date: 2027-09-07 23:06:32 GMT * issuer: C=US, ST=California, L=Sunnyvale, O=Google, OU=Certificate Authority, CN=support, [email protected] * SSL certificate verify result: unable to get local issuer certificate (20), continuing anyway. > POST /gportal/gpmgr HTTP/1.1^M Host: 10.10.101.12^M Accept: */*^M Accept-Encoding: gzip,deflate^M Content-Length: 1623^M Content-Type: application/x-www-form-urlencoded^M Expect: 100-continue^M ^M < HTTP/1.1 100 Continue^M < HTTP/1.1 200 OK^M < Date: Wed, 28 Apr 2010 21:56:15 GMT^M < Server: Apache^M < Cache-Control: no-cache^M < Pragma: no-cache^M < Vary: Accept-Encoding^M < Content-Encoding: gzip^M < Content-Length: 1453^M < Content-Type: application/json^M < ^M * Connection #0 to host 10.10.101.12 left intact * Closing connection #0 My CURL options are as under: $ch = curl_init(); $devnull = fopen('/tmp/curlcookie.txt', 'w'); $fp_err = fopen('/tmp/verbose_file.txt', 'ab+'); fwrite($fp_err, date('Y-m-d H:i:s')."\n\n"); curl_setopt($ch, CURLOPT_STDERR, $devnull); curl_setopt($ch, CURLOPT_POST, 1); curl_setopt($ch, CURLOPT_URL, $desturl); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0); curl_setopt($ch, CURLOPT_CONNECTTIMEOUT,120); curl_setopt($ch, CURLOPT_AUTOREFERER, true); curl_setopt($ch, CURLOPT_ENCODING, 'gzip,deflate'); curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata); curl_setopt($ch, CURLOPT_VERBOSE,1); curl_setopt($ch, CURLOPT_FAILONERROR, true); curl_setopt($ch, CURLOPT_STDERR, $fp_err); $ret = curl_exec($ch); Anybody has any idea, why it works sometimes but fails mostly? Thanks

  Read the article

• Problem with URL encoded parameters in URL view helper

  - by Richard Knop

  So my problem is kinda weird, it only occurs when I test the application offline (on my PC with WampServer), the same code works 100% correctly online. Here is how I use the helper (just example): <a href="<?php echo $this->url(array('module' => 'admin', 'controller' => 'index', 'action' => 'approve-photo', 'id' => $this->escape($a->id), 'ret' => urlencode('admin/index/photos')), null, true); ?>" class="blue">approve</a> Online, this link works great, it goes to the action which looks similar to this: public function approvePhotoAction() { $request = $this->getRequest(); $photos = $this->_getTable('Photos'); $dbTrans = false; try { $db = $this->_getDb(); $dbTrans = $db->beginTransaction(); $photos->edit($request->getParam('id'), array('status' => 'approved')); $db->commit(); } catch (Exception $e) { if (true === $dbTrans) { $db->rollBack(); } } $this->_redirect(urldecode($request->getParam('ret'))); } So online, it approves the photo and redirects back to the URL that is encoded as "ret" param in the URL ("admin/index/photos"). But offline with WampServer I click on the link and get 404 error like this: Not Found The requested URL /public/admin/index/approve-photo/id/1/ret/admin/index/photos was not found on this server. What the hell? I'm using the latest version of WampServer (WampServer 2.0i [11/07/09]). Everything else works. Here is my .htaccess file, just in case: RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ /index.php [NC,L] # Turn off magic quotes #php_flag magic_quotes_gpc off I'm using virtual hosts to test ZF projects on my local PC. Here is how I add virtual hosts. httpd.conf: NameVirtualHost *:80 <VirtualHost *:80> ServerName myproject DocumentRoot "C:\wamp\www\myproject" </VirtualHost> the hosts file: 127.0.0.1 myproject Any help would be appreciated because this makes testing and debugging projects on my localhost a nightmare and almost impossible task. I have to upload everything online to check if it works :( UPDATE: Source code of the _redirect helper (built in ZF helper): /** * Set redirect in response object * * @return void */ protected function _redirect($url) { if ($this->getUseAbsoluteUri() && !preg_match('#^(https?|ftp)://#', $url)) { $host = (isset($_SERVER['HTTP_HOST'])?$_SERVER['HTTP_HOST']:''); $proto = (isset($_SERVER['HTTPS'])&&$_SERVER['HTTPS']!=="off") ? 'https' : 'http'; $port = (isset($_SERVER['SERVER_PORT'])?$_SERVER['SERVER_PORT']:80); $uri = $proto . '://' . $host; if ((('http' == $proto) && (80 != $port)) || (('https' == $proto) && (443 != $port))) { $uri .= ':' . $port; } $url = $uri . '/' . ltrim($url, '/'); } $this->_redirectUrl = $url; $this->getResponse()->setRedirect($url, $this->getCode()); } UPDATE 2: Output of the helper offline: /admin/index/approve-photo/id/1/ret/admin%252Findex%252Fphotos And online (the same): /admin/index/approve-photo/id/1/ret/admin%252Findex%252Fphotos UPDATE 3: OK. The problem was actually with the virtual host configuration. The document root was set to C:\wamp\www\myproject instead of C:\wamp\www\myproject\public. And I was using this htaccess to redirect to the public folder: RewriteEngine On php_value upload_max_filesize 15M php_value post_max_size 15M php_value max_execution_time 200 php_value max_input_time 200 # Exclude some directories from URI rewriting #RewriteRule ^(dir1|dir2|dir3) - [L] RewriteRule ^\.htaccess$ - [F] RewriteCond %{REQUEST_URI} ="" RewriteRule ^.*$ /public/index.php [NC,L] RewriteCond %{REQUEST_URI} !^/public/.*$ RewriteRule ^(.*)$ /public/$1 RewriteCond %{REQUEST_FILENAME} -f RewriteRule ^.*$ - [NC,L] RewriteRule ^public/.*$ /public/index.php [NC,L] Damn it I don't know why I forgot about this, I thought the virtual host was configured correctly to the public folder, I was 100% sure about that, I also double checked it and saw no problem (wtf? am I blind?).

  Read the article

• Mercurial "hg clone" on Windows via ssh with plink issue

  - by Kyle Tolle

  I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

  Read the article

• Problem in transfering file from server to client using C sockets

  - by coolrockers2007

  I want to ask, why I cannot transfer file from server to client? When I start to send the file from server, the client side program will have problem. So, I spend some times to check the code, But I still cannot find out the problem Can anyone point out the problem for me? CLIENTFILE.C #include stdio.h #include stdlib.h #include time.h #include netinet/in.h #include fcntl.h #include sys/types.h #include string.h #include stdarg.h #define PORT 5678 #define MLEN 1000 int main(int argc, char *argv []) { int sockfd; int number,message; char outbuff[MLEN],inbuff[MLEN]; //char PWD_buffer[_MAX_PATH]; struct sockaddr_in servaddr; FILE *fp; int numbytes; char buf[2048]; if (argc != 2) fprintf(stderr, "error"); if ( (sockfd = socket(AF_INET, SOCK_STREAM, 0)) < 0) fprintf(stderr, "socket error"); memset(&servaddr, 0, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_port = htons(PORT); if (connect(sockfd, (struct sockaddr *) &servaddr, sizeof(servaddr)) < 0) fprintf(stderr, "connect error"); if ( (fp = fopen("/home/na/nall9047/write.txt", "w")) == NULL){ perror("fopen"); exit(1); } printf("Still NO PROBLEM!\n"); //Receive file from server while(1){ numbytes = read(sockfd, buf, sizeof(buf)); printf("read %d bytes, ", numbytes); if(numbytes == 0){ printf("\n"); break; } numbytes = fwrite(buf, sizeof(char), numbytes, fp); printf("fwrite %d bytes\n", numbytes); } fclose(fp); close(sockfd); return 0; } SERVERFILE.C #include stdio.h #include fcntl.h #include stdlib.h #include time.h #include string.h #include netinet/in.h #include errno.h #include sys/types.h #include sys/socket.h #includ estdarg.h #define PORT 5678 #define MLEN 1000 int main(int argc, char *argv []) { int listenfd, connfd; int number, message, numbytes; int h, i, j, alen; int nread; struct sockaddr_in servaddr; struct sockaddr_in cliaddr; FILE *in_file, *out_file, *fp; char buf[4096]; listenfd = socket(AF_INET, SOCK_STREAM, 0); if (listenfd < 0) fprintf(stderr,"listen error") ; memset(&servaddr, 0, sizeof(servaddr)); servaddr.sin_family = AF_INET; servaddr.sin_addr.s_addr = htonl(INADDR_ANY); servaddr.sin_port = htons(PORT); if (bind(listenfd, (struct sockaddr *) &servaddr, sizeof(servaddr)) < 0) fprintf(stderr,"bind error") ; alen = sizeof(struct sockaddr); connfd = accept(listenfd, (struct sockaddr *) &cliaddr, &alen); if (connfd < 0) fprintf(stderr,"error connecting") ; printf("accept one client from %s!\n", inet_ntoa(cliaddr.sin_addr)); fp = fopen ("/home/na/nall9047/read.txt", "r"); // open file stored in server if (fp == NULL) { printf("\nfile NOT exist"); } //Sending file while(!feof(fp)){ numbytes = fread(buf, sizeof(char), sizeof(buf), fp); printf("fread %d bytes, ", numbytes); numbytes = write(connfd, buf, numbytes); printf("Sending %d bytes\n",numbytes); } fclose (fp); close(listenfd); close(connfd); return 0; }

  Read the article

• How do I get through proxy server environments for non-standard services?

  - by Ripred

  I'm not real hip on exactly what role(s) today's proxy servers can play and I'm learning so go easy on me :-) I have a client/server system I have written using a homegrown protocol and need to enhance the client side to negotiate its way out of a proxy environment. I have an existing client and server system written in C and C++ for the speed and a small amount of MFC in the client to handle the user interface. I have written both the server and client side of the system on Windows (the people I work for are mainly web developers using Windows everything - not a choice) sticking to Berkeley Sockets as it were via wsock32 for efficiency. The clients connect to the server through a nonstandard port (even though using port 80 is an option to get out of some environments but the protocol that goes over it isn't HTTP). The TCP connection(s) stay open for the duration of the clients participation in real time conferences. Our customer base is expanding to all kinds of networked environments. I have been able to solve a lot of problems by adding the ability to connect securely over port 443 and using secure sockets which allows the protocol to pass through a lot environments since the internal packets can't be sniffed. But more and more of our customers are behind a proxy server environment and my direct connections don't make it through. My old school understanding of proxy servers is that they act as a proxy for external HTML content over HTTP, possibly locally caching popular material for faster local access, and also allowing their IT staff to blacklist certain destination sites. Customer are complaining that my software doesn't recognize and easily navigate its way through their proxy environments but I'm finding it difficult to decide what my "best fit" solution should be. My software doesn't tear down the connection after each client request, and on top of that packets can come from either side at any time, basically your typical custom client/server system for a specific niche. My first reaction is "why can't they just add my servers addresses to their white list" but if there is a programmatic way I can get through without requiring their IT staff to help it is politically better and arguably a better solution anyway. Plus maybe I'm still not understanding the role and purpose of what proxy servers and environments have grown to be these days. My first attempt at a solution was to use WinInet with its various proxy capabilities to establish a connection over port 80 to my non-standard protocol server (which knows enough to recognize and answer a simple HTTP-looking GET request and answer it with a simple HTTP response page to get around some environments that employ initial packet sniffing (DPI)). I retrieved the actual SOCKET handle behind WinInet's HINTERNET request object and had hoped to use that in place of my software's existing SOCKET connection and hopefully not need to change much more on the client side. It initially seemed to be my solution but on further inspection it seems that the OS gets first-chance at the received data on this socket since when I get notified of events via the standard select(...) statement on the socket and query the size of the data available via ioctlsocket the call succeeds but returns 0 bytes available, the reads don't work and it goes downhill from there. Can someone tell me of a client-side library (commercial is fine) will let me get past these proxy server environments with as little user and IT staff help as possible? From what I read it has grown past SOCKS and I figure someone has to have solved this problem before me. Thanks for reading my long-winded question, Ripred

  Read the article

• easiest and best way to make a server queue java

  - by houlahan

  i have a server at the moment which makes a new thread for every user connected but after about 6 people are on the server for more than 15 mins it tends to flop and give me java heap out of memory error i have 1 thread that checks with a mysql database every 30 seconds to see if any of the users currently logged on have any new messages. what would be the easiest way to implement a server queue? this is the my main method for my server: public class Server { public static int MaxUsers = 1000; //public static PrintStream[] sessions = new PrintStream[MaxUsers]; public static ObjectOutputStream[] sessions = new ObjectOutputStream[MaxUsers]; public static ObjectInputStream[] ois = new ObjectInputStream[MaxUsers]; private static int port = 6283; public static Connection conn; static Toolkit toolkit; static Timer timer; public static void main(String[] args) { try { conn = (Connection) Mysql.getConnection(); } catch (Exception ex) { Logger.getLogger(Server.class.getName()).log(Level.SEVERE, null, ex); } System.out.println("****************************************************"); System.out.println("* *"); System.out.println("* Cloud Server *"); System.out.println("* ©2010 *"); System.out.println("* *"); System.out.println("* Luke Houlahan *"); System.out.println("* *"); System.out.println("* Server Online *"); System.out.println("* Listening On Port " + port + " *"); System.out.println("* *"); System.out.println("****************************************************"); System.out.println(""); mailChecker(); try { int i; ServerSocket s = new ServerSocket(port); for (i = 0; i < MaxUsers; ++i) { sessions[i] = null; } while (true) { try { Socket incoming = s.accept(); boolean found = false; int numusers = 0; int usernum = -1; synchronized (sessions) { for (i = 0; i < MaxUsers; ++i) { if (sessions[i] == null) { if (!found) { sessions[i] = new ObjectOutputStream(incoming.getOutputStream()); ois[i]= new ObjectInputStream(incoming.getInputStream()); new SocketHandler(incoming, i).start(); found = true; usernum = i; } } else { numusers++; } } if (!found) { ObjectOutputStream temp = new ObjectOutputStream(incoming.getOutputStream()); Person tempperson = new Person(); tempperson.setFlagField(100); temp.writeObject(tempperson); temp.flush(); temp = null; tempperson = null; incoming.close(); } else { } } } catch (IOException ex) { System.out.println(1); Logger.getLogger(Server.class.getName()).log(Level.SEVERE, null, ex); } } } catch (IOException ex) { System.out.println(2); Logger.getLogger(Server.class.getName()).log(Level.SEVERE, null, ex); } } public static void mailChecker() { toolkit = Toolkit.getDefaultToolkit(); timer = new Timer(); timer.schedule(new mailCheck(), 0, 10 * 1000); } }

  Read the article

• perl : Passing hash , array through socket program betwen client and server

  - by pavun_cool

  Hi All . In sockets I have written the client server program . First I tried to send the normal string among them it sends fine . After that I am trying to send the hash and array values from client to server and server to client . When I printing the values using Dumper . It is giving me only reference . What Should I do for getting accessing the actual values in client server . Server Program: use IO::Socket; use strict; use warnings; my %hash = ( "name" => "pavunkumar " , "age" => 20 ) ; my $new = \%hash ; #Turn on System variable for Buffering output $| = 1; # Creating a a new socket my $socket= IO::Socket::INET->new(LocalPort=>5000,Proto=>'tcp',Localhost => 'localhost','Listen' => 5 , 'Reuse' => 1 ); die "could not create $! \n" unless ( $socket ); print "\nUDPServer Waiting port 5000\n"; my $new_sock = $socket->accept(); my $host = $new_sock->peerhost(); while(<$new_sock>) { #my $line = <$new_sock>; print Dumper "$host $_"; print $new_sock $new . "\n"; } print "$host is closed \n" ; Client Program use IO::Socket; use Data::Dumper ; use warnings ; use strict ; my %hash = ( "file" =>"log.txt" , size => "1000kb") ; my $ref = \%hash ; # This client for connecting the specified below address and port # INET function will create the socket file and establish the connection with # server my $port = shift || 5000 ; my $host = shift || 'localhost'; my $recv_data ; my $send_data; my $socket = new IO::Socket::INET ( PeerAddr => $host , PeerPort => $port , Proto => 'tcp', ) or die "Couldn't connect to Server\n"; while (1) { my $line = <stdin> ; print $socket $ref."\n"; if ( $line = <$socket> ) { print Dumper $line ; } else { print "Server is closed \n"; last ; } } I have given my sample program about what I am doing , Can any one tell me what I am doing wrong in this code. And what I need to do for accessing the hash values . Thanks in Advance

  Read the article

• How can I share Perl data structures through a socket?

  - by pavun_cool

  In sockets I have written the client server program. First I tried to send the normal string among them it sends fine. After that I tried to send the hash and array values from client to server and server to client. When I print the values using Dumper, it gives me only the reference value. What should I do to get the actual values in client server? Server Program: use IO::Socket; use strict; use warnings; my %hash = ( "name" => "pavunkumar " , "age" => 20 ) ; my $new = \%hash ; #Turn on System variable for Buffering output $| = 1; # Creating a a new socket my $socket= IO::Socket::INET->new(LocalPort=>5000,Proto=>'tcp',Localhost => 'localhost','Listen' => 5 , 'Reuse' => 1 ); die "could not create $! \n" unless ( $socket ); print "\nUDPServer Waiting port 5000\n"; my $new_sock = $socket->accept(); my $host = $new_sock->peerhost(); while(<$new_sock>) { #my $line = <$new_sock>; print Dumper "$host $_"; print $new_sock $new . "\n"; } print "$host is closed \n" ; Client Program use IO::Socket; use Data::Dumper ; use warnings ; use strict ; my %hash = ( "file" =>"log.txt" , size => "1000kb") ; my $ref = \%hash ; # This client for connecting the specified below address and port # INET function will create the socket file and establish the connection with # server my $port = shift || 5000 ; my $host = shift || 'localhost'; my $recv_data ; my $send_data; my $socket = new IO::Socket::INET ( PeerAddr => $host , PeerPort => $port , Proto => 'tcp', ) or die "Couldn't connect to Server\n"; while (1) { my $line = <stdin> ; print $socket $ref."\n"; if ( $line = <$socket> ) { print Dumper $line ; } else { print "Server is closed \n"; last ; } } I have given my sample program about what I am doing. Can any one tell me what I am doing wrong in this code? And what I need to do for accessing the hash values?

  Read the article

• Java, server client TCP communication ends with RST

  - by Senne

  I'm trying to figure out if this is normal. Because without errors, a connection should be terminated by: FIN -> <- ACK <- FIN ACK -> I get this at the end of a TCP connection (over SSL, but i also get it with non-encrypted): From To 1494 server client TCP search-agent > 59185 [PSH, ACK] Seq=25974 Ack=49460 Win=63784 Len=50 1495 client server TCP 59185 > search-agent [ACK] Seq=49460 Ack=26024 Win=63565 Len=0 1496 client server TCP 59185 > search-agent [PSH, ACK] Seq=49460 Ack=26024 Win=63565 Len=23 1497 client server TCP 59185 > search-agent [FIN, ACK] Seq=49483 Ack=26024 Win=63565 Len=0 1498 server client TCP search-agent > 59185 [PSH, ACK] Seq=26024 Ack=49484 Win=63784 Len=23 1499 client server TCP 59185 > search-agent [RST, ACK] Seq=49484 Ack=26047 Win=0 Len=0 The client exits normally and reaches socket.close, shouldn't then the connection be shut down normally, without a reset? I can't find anything about the TCP streams of java on google... Here is my code: Server: package Security; import java.io.*; import java.net.*; import javax.net.ServerSocketFactory; import javax.net.ssl.*; import java.util.*; public class SSLDemoServer { private static ServerSocket serverSocket; private static final int PORT = 1234; public static void main(String[] args) throws IOException { int received = 0; String returned; ObjectInputStream input = null; PrintWriter output = null; Socket client; System.setProperty("javax.net.ssl.keyStore", "key.keystore"); System.setProperty("javax.net.ssl.keyStorePassword", "vwpolo"); System.setProperty("javax.net.ssl.trustStore", "key.keystore"); System.setProperty("javax.net.ssl.trustStorePassword", "vwpolo"); try { System.out.println("Trying to set up server ..."); ServerSocketFactory factory = SSLServerSocketFactory.getDefault(); serverSocket = factory.createServerSocket(PORT); System.out.println("Server started!\n"); } catch (IOException ioEx) { System.out.println("Unable to set up port!"); ioEx.printStackTrace(); System.exit(1); } while(true) { client = serverSocket.accept(); System.out.println("Client trying to connect..."); try { System.out.println("Trying to create inputstream..."); input = new ObjectInputStream(client.getInputStream()); System.out.println("Trying to create outputstream..."); output = new PrintWriter(client.getOutputStream(), true); System.out.println("Client successfully connected!"); while( true ) { received = input.readInt(); returned = Integer.toHexString(received); System.out.print(" " + received); output.println(returned.toUpperCase()); } } catch(SSLException sslEx) { System.out.println("Connection failed! (non-SSL connection?)\n"); client.close(); continue; } catch(EOFException eofEx) { System.out.println("\nEnd of client data.\n"); } catch(IOException ioEx) { System.out.println("I/O problem! (correct inputstream?)"); } try { input.close(); output.close(); } catch (Exception e) { } client.close(); System.out.println("Client closed.\n"); } } } Client: package Security; import java.io.*; import java.net.*; import javax.net.ssl.*; import java.util.*; public class SSLDemoClient { private static InetAddress host; private static final int PORT = 1234; public static void main(String[] args) { System.setProperty("javax.net.ssl.keyStore", "key.keystore"); System.setProperty("javax.net.ssl.keyStorePassword", "vwpolo"); System.setProperty("javax.net.ssl.trustStore", "key.keystore"); System.setProperty("javax.net.ssl.trustStorePassword", "vwpolo"); System.out.println("\nCreating SSL socket ..."); SSLSocket socket = null; try { host = InetAddress.getByName("192.168.56.101"); SSLSocketFactory factory = (SSLSocketFactory) SSLSocketFactory.getDefault(); socket = (SSLSocket) factory.createSocket(host, PORT); socket.startHandshake(); } catch(UnknownHostException uhEx) { System.out.println("\nHost ID not found!\n"); System.exit(1); } catch(SSLException sslEx) { System.out.println("\nHandshaking unsuccessful ..."); System.exit(1); } catch (IOException e) { e.printStackTrace(); } System.out.println("\nHandshaking succeeded ...\n"); SSLClientThread client = new SSLClientThread(socket); SSLReceiverThread receiver = new SSLReceiverThread(socket); client.start(); receiver.start(); try { client.join(); receiver.join(); System.out.println("Trying to close..."); socket.close(); } catch(InterruptedException iEx) { iEx.printStackTrace(); } catch(IOException ioEx) { ioEx.printStackTrace(); } System.out.println("\nClient finished."); } } class SSLClientThread extends Thread { private SSLSocket socket; public SSLClientThread(SSLSocket s) { socket = s; } public void run() { try { ObjectOutputStream output = new ObjectOutputStream(socket.getOutputStream()); for( int i = 1; i < 1025; i++) { output.writeInt(i); sleep(10); output.flush(); } output.flush(); sleep(1000); output.close(); } catch(IOException ioEx) { System.out.println("Socket closed or unable to open socket."); } catch(InterruptedException iEx) { iEx.printStackTrace(); } } } class SSLReceiverThread extends Thread { private SSLSocket socket; public SSLReceiverThread(SSLSocket s) { socket = s; } public void run() { String response = null; BufferedReader input = null; try { input = new BufferedReader( new InputStreamReader(socket.getInputStream())); try { response = input.readLine(); while(!response.equals(null)) { System.out.print(response + " "); response = input.readLine(); } } catch(Exception e) { System.out.println("\nEnd of server data.\n"); } input.close(); } catch(IOException ioEx) { ioEx.printStackTrace(); } } }

  Read the article

• FreeBSD performance tuning. Sysctls, loader.conf, kernel

  - by SaveTheRbtz

  I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

  Read the article

• Why is this giving me 2 different sets of timezones?

  - by chobo2

  Hi I have this line to get all the timezones Dictionary<string, TimeZoneInfo> storeZoneName = TimeZoneInfo.GetSystemTimeZones().ToDictionary(z => z.DisplayName); Now when I upload I try it on my local machine I get this (UTC-12:00) International Date Line West (UTC-11:00) Coordinated Universal Time-11 (UTC-11:00) Samoa (UTC-10:00) Hawaii (UTC-09:00) Alaska (UTC-08:00) Baja California (UTC-08:00) Pacific Time (US & Canada) (UTC-07:00) Arizona (UTC-07:00) Chihuahua, La Paz, Mazatlan (UTC-07:00) Mountain Time (US & Canada) (UTC-06:00) Central America (UTC-06:00) Central Time (US & Canada) (UTC-06:00) Guadalajara, Mexico City, Monterrey (UTC-06:00) Saskatchewan (UTC-05:00) Bogota, Lima, Quito (UTC-05:00) Eastern Time (US & Canada) (UTC-05:00) Indiana (East) (UTC-04:30) Caracas (UTC-04:00) Asuncion (UTC-04:00) Atlantic Time (Canada) (UTC-04:00) Cuiaba (UTC-04:00) Georgetown, La Paz, Manaus, San Juan (UTC-04:00) Santiago (UTC-03:30) Newfoundland (UTC-03:00) Brasilia (UTC-03:00) Buenos Aires (UTC-03:00) Cayenne, Fortaleza (UTC-03:00) Greenland (UTC-03:00) Montevideo (UTC-02:00) Coordinated Universal Time-02 (UTC-02:00) Mid-Atlantic (UTC-01:00) Azores (UTC-01:00) Cape Verde Is. (UTC) Casablanca (UTC) Coordinated Universal Time (UTC) Dublin, Edinburgh, Lisbon, London (UTC) Monrovia, Reykjavik (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (UTC+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague (UTC+01:00) Brussels, Copenhagen, Madrid, Paris (UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb (UTC+01:00) West Central Africa (UTC+02:00) Amman (UTC+02:00) Athens, Bucharest, Istanbul (UTC+02:00) Beirut (UTC+02:00) Cairo (UTC+02:00) Harare, Pretoria (UTC+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius (UTC+02:00) Jerusalem (UTC+02:00) Minsk (UTC+02:00) Windhoek (UTC+03:00) Baghdad (UTC+03:00) Kuwait, Riyadh (UTC+03:00) Moscow, St. Petersburg, Volgograd (UTC+03:00) Nairobi (UTC+03:30) Tehran (UTC+04:00) Abu Dhabi, Muscat (UTC+04:00) Baku (UTC+04:00) Port Louis (UTC+04:00) Tbilisi (UTC+04:00) Yerevan (UTC+04:30) Kabul (UTC+05:00) Ekaterinburg (UTC+05:00) Islamabad, Karachi (UTC+05:00) Tashkent (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi (UTC+05:30) Sri Jayawardenepura (UTC+05:45) Kathmandu (UTC+06:00) Astana (UTC+06:00) Dhaka (UTC+06:00) Novosibirsk (UTC+06:30) Yangon (Rangoon) (UTC+07:00) Bangkok, Hanoi, Jakarta (UTC+07:00) Krasnoyarsk (UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi (UTC+08:00) Irkutsk (UTC+08:00) Kuala Lumpur, Singapore (UTC+08:00) Perth (UTC+08:00) Taipei (UTC+08:00) Ulaanbaatar (UTC+09:00) Osaka, Sapporo, Tokyo (UTC+09:00) Seoul (UTC+09:00) Yakutsk (UTC+09:30) Adelaide (UTC+09:30) Darwin (UTC+10:00) Brisbane (UTC+10:00) Canberra, Melbourne, Sydney (UTC+10:00) Guam, Port Moresby (UTC+10:00) Hobart (UTC+10:00) Vladivostok (UTC+11:00) Magadan, Solomon Is., New Caledonia (UTC+12:00) Auckland, Wellington (UTC+12:00) Coordinated Universal Time+12 (UTC+12:00) Fiji (UTC+12:00) Petropavlovsk-Kamchatsky (UTC+13:00) Nuku'alofa When I run it on a different local machine or my server I have this. <option value="(GMT) Casablanca">(GMT) Casablanca</option> <option value="(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London">(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London</option> <option value="(GMT) Monrovia, Reykjavik">(GMT) Monrovia, Reykjavik</option> <option value="(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna">(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna</option> <option value="(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague">(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague</option> <option value="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris">(GMT+01:00) Brussels, Copenhagen, Madrid, Paris</option> <option value="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb">(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb</option> <option value="(GMT+01:00) West Central Africa">(GMT+01:00) West Central Africa</option> <option value="(GMT+02:00) Amman">(GMT+02:00) Amman</option> <option value="(GMT+02:00) Athens, Bucharest, Istanbul">(GMT+02:00) Athens, Bucharest, Istanbul</option> <option value="(GMT+02:00) Beirut">(GMT+02:00) Beirut</option> <option value="(GMT+02:00) Cairo">(GMT+02:00) Cairo</option> <option value="(GMT+02:00) Harare, Pretoria">(GMT+02:00) Harare, Pretoria</option> <option value="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius">(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius</option> <option value="(GMT+02:00) Jerusalem">(GMT+02:00) Jerusalem</option> <option value="(GMT+02:00) Minsk">(GMT+02:00) Minsk</option> <option value="(GMT+02:00) Windhoek">(GMT+02:00) Windhoek</option> <option value="(GMT+03:00) Baghdad">(GMT+03:00) Baghdad</option> <option value="(GMT+03:00) Kuwait, Riyadh">(GMT+03:00) Kuwait, Riyadh</option> <option value="(GMT+03:00) Moscow, St. Petersburg, Volgograd">(GMT+03:00) Moscow, St. Petersburg, Volgograd</option> <option value="(GMT+03:00) Nairobi">(GMT+03:00) Nairobi</option> <option value="(GMT+03:00) Tbilisi">(GMT+03:00) Tbilisi</option> <option value="(GMT+03:30) Tehran">(GMT+03:30) Tehran</option> <option value="(GMT+04:00) Abu Dhabi, Muscat">(GMT+04:00) Abu Dhabi, Muscat</option> <option value="(GMT+04:00) Baku">(GMT+04:00) Baku</option> <option value="(GMT+04:00) Port Louis">(GMT+04:00) Port Louis</option> <option value="(GMT+04:00) Yerevan">(GMT+04:00) Yerevan</option> <option value="(GMT+04:30) Kabul">(GMT+04:30) Kabul</option> <option value="(GMT+05:00) Ekaterinburg">(GMT+05:00) Ekaterinburg</option> <option value="(GMT+05:00) Islamabad, Karachi">(GMT+05:00) Islamabad, Karachi</option> <option value="(GMT+05:00) Tashkent">(GMT+05:00) Tashkent</option> <option value="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi">(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi</option> <option value="(GMT+05:30) Sri Jayawardenepura">(GMT+05:30) Sri Jayawardenepura</option> <option value="(GMT+05:45) Kathmandu">(GMT+05:45) Kathmandu</option> <option value="(GMT+06:00) Almaty, Novosibirsk">(GMT+06:00) Almaty, Novosibirsk</option> <option value="(GMT+06:00) Astana, Dhaka">(GMT+06:00) Astana, Dhaka</option> <option value="(GMT+06:30) Yangon (Rangoon)">(GMT+06:30) Yangon (Rangoon)</option> <option value="(GMT+07:00) Bangkok, Hanoi, Jakarta">(GMT+07:00) Bangkok, Hanoi, Jakarta</option> <option value="(GMT+07:00) Krasnoyarsk">(GMT+07:00) Krasnoyarsk</option> <option value="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi">(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi</option> <option value="(GMT+08:00) Irkutsk, Ulaan Bataar">(GMT+08:00) Irkutsk, Ulaan Bataar</option> <option value="(GMT+08:00) Kuala Lumpur, Singapore">(GMT+08:00) Kuala Lumpur, Singapore</option> <option value="(GMT+08:00) Perth">(GMT+08:00) Perth</option> <option value="(GMT+08:00) Taipei">(GMT+08:00) Taipei</option> <option value="(GMT+09:00) Osaka, Sapporo, Tokyo">(GMT+09:00) Osaka, Sapporo, Tokyo</option> <option value="(GMT+09:00) Seoul">(GMT+09:00) Seoul</option> <option value="(GMT+09:00) Yakutsk">(GMT+09:00) Yakutsk</option> <option value="(GMT+09:30) Adelaide">(GMT+09:30) Adelaide</option> <option value="(GMT+09:30) Darwin">(GMT+09:30) Darwin</option> <option value="(GMT+10:00) Brisbane">(GMT+10:00) Brisbane</option> <option value="(GMT+10:00) Canberra, Melbourne, Sydney">(GMT+10:00) Canberra, Melbourne, Sydney</option> <option value="(GMT+10:00) Guam, Port Moresby">(GMT+10:00) Guam, Port Moresby</option> <option value="(GMT+10:00) Hobart">(GMT+10:00) Hobart</option> <option value="(GMT+10:00) Vladivostok">(GMT+10:00) Vladivostok</option> <option value="(GMT+11:00) Magadan, Solomon Is., New Caledonia">(GMT+11:00) Magadan, Solomon Is., New Caledonia</option> <option value="(GMT+12:00) Auckland, Wellington">(GMT+12:00) Auckland, Wellington</option> <option value="(GMT+12:00) Fiji, Kamchatka, Marshall Is.">(GMT+12:00) Fiji, Kamchatka, Marshall Is.</option> <option value="(GMT+13:00) Nuku'alofa">(GMT+13:00) Nuku'alofa</option> <option value="(GMT-01:00) Azores">(GMT-01:00) Azores</option> <option value="(GMT-01:00) Cape Verde Is.">(GMT-01:00) Cape Verde Is.</option> <option value="(GMT-02:00) Mid-Atlantic">(GMT-02:00) Mid-Atlantic</option> <option value="(GMT-03:00) Brasilia">(GMT-03:00) Brasilia</option> <option value="(GMT-03:00) Buenos Aires">(GMT-03:00) Buenos Aires</option> <option value="(GMT-03:00) Georgetown">(GMT-03:00) Georgetown</option> <option value="(GMT-03:00) Greenland">(GMT-03:00) Greenland</option> <option value="(GMT-03:00) Montevideo">(GMT-03:00) Montevideo</option> <option value="(GMT-03:30) Newfoundland">(GMT-03:30) Newfoundland</option> <option value="(GMT-04:00) Atlantic Time (Canada)">(GMT-04:00) Atlantic Time (Canada)</option> <option value="(GMT-04:00) La Paz">(GMT-04:00) La Paz</option> <option value="(GMT-04:00) Manaus">(GMT-04:00) Manaus</option> <option value="(GMT-04:00) Santiago">(GMT-04:00) Santiago</option> <option value="(GMT-04:30) Caracas">(GMT-04:30) Caracas</option> <option value="(GMT-05:00) Bogota, Lima, Quito, Rio Branco">(GMT-05:00) Bogota, Lima, Quito, Rio Branco</option> <option value="(GMT-05:00) Eastern Time (US &amp; Canada)">(GMT-05:00) Eastern Time (US &amp; Canada)</option> <option value="(GMT-05:00) Indiana (East)">(GMT-05:00) Indiana (East)</option> <option value="(GMT-06:00) Central America">(GMT-06:00) Central America</option> <option value="(GMT-06:00) Central Time (US &amp; Canada)">(GMT-06:00) Central Time (US &amp; Canada)</option> <option value="(GMT-06:00) Guadalajara, Mexico City, Monterrey">(GMT-06:00) Guadalajara, Mexico City, Monterrey</option> <option value="(GMT-06:00) Saskatchewan">(GMT-06:00) Saskatchewan</option> <option value="(GMT-07:00) Arizona">(GMT-07:00) Arizona</option> <option value="(GMT-07:00) Chihuahua, La Paz, Mazatlan">(GMT-07:00) Chihuahua, La Paz, Mazatlan</option> <option value="(GMT-07:00) Mountain Time (US &amp; Canada)">(GMT-07:00) Mountain Time (US &amp; Canada)</option> <option value="(GMT-08:00) Pacific Time (US &amp; Canada)">(GMT-08:00) Pacific Time (US &amp; Canada)</option> <option value="(GMT-08:00) Tijuana, Baja California">(GMT-08:00) Tijuana, Baja California</option> <option value="(GMT-09:00) Alaska">(GMT-09:00) Alaska</option> <option value="(GMT-10:00) Hawaii">(GMT-10:00) Hawaii</option> <option value="(GMT-11:00) Midway Island, Samoa">(GMT-11:00) Midway Island, Samoa</option> <option value="(GMT-12:00) International Date Line West">(GMT-12:00) International Date Line West</option> They are different. Same line of code but one is GMT and one is UTC. How can I force it to be always the same? Also I want to have a default choice of "UTC" but I am not sure what the diff is between this (UTC-11:00) Coordinated Universal Time-11 and this (UTC-02:00) Coordinated Universal Time-02

  Read the article

• Links to my “Best of 2010” Posts

  - by ScottGu

  I hope everyone is having a Happy New Years! 2010 has been a busy blogging year for me (this is the 100th blog post I’ve done in 2010).  Several people this week suggested I put together a summary post listing/organizing my favorite posts from the year.  Below is a quick listing of some of my favorite posts organized by topic area: VS 2010 and .NET 4 Below is a series of posts I wrote (some in late 2009) about the VS 2010 and .NET 4 (including ASP.NET 4 and WPF 4) release we shipped in April: Visual Studio 2010 and .NET 4 Released Clean Web.Config Files Starter Project Templates Multi-targeting Multiple Monitor Support New Code Focused Web Profile Option HTML / ASP.NET / JavaScript Code Snippets Auto-Start ASP.NET Applications URL Routing with ASP.NET 4 Web Forms Searching and Navigating Code in VS 2010 VS 2010 Code Intellisense Improvements WPF 4 Add Reference Dialog Improvements SEO Improvements with ASP.NET 4 Output Cache Extensibility with ASP.NET 4 Built-in Charting Controls for ASP.NET and Windows Forms Cleaner HTML Markup with ASP.NET 4 - Client IDs Optional Parameters and Named Arguments in C# 4 - and a cool scenarios with ASP.NET MVC 2 Automatic Properties, Collection Initializers and Implicit Line Continuation Support with VB 2010 New <%: %> Syntax for HTML Encoding Output using ASP.NET 4 JavaScript Intellisense Improvements with VS 2010 VS 2010 Debugger Improvements (DataTips, BreakPoints, Import/Export) Box Selection and Multi-line Editing Support with VS 2010 VS 2010 Extension Manager (and the cool new PowerCommands Extension) Pinning Projects and Solutions VS 2010 Web Deployment Debugging Tips/Tricks with Visual Studio Search and Navigation Tips/Tricks with Visual Studio Visual Studio Below are some additional Visual Studio posts I’ve done (not in the first series above) that I thought were nice: Download and Share Visual Studio Color Schemes Visual Studio 2010 Keyboard Shortcuts VS 2010 Productivity Power Tools Fun Visual Studio 2010 Wallpapers Silverlight We shipped Silverlight 4 in April, and announced Silverlight 5 the beginning of December: Silverlight 4 Released Silverlight 4 Tools for VS 2010 and WCF RIA Services Released Silverlight 4 Training Kit Silverlight PivotViewer Now Available Silverlight Questions Announcing Silverlight 5 Silverlight for Windows Phone 7 We shipped Windows Phone 7 this fall and shipped free Visual Studio development tools with great Silverlight and XNA support in September: Windows Phone 7 Developer Tools Released Building a Windows Phone 7 Twitter Application using Silverlight ASP.NET MVC We shipped ASP.NET MVC 2 in March, and started previewing ASP.NET MVC 3 this summer.  ASP.NET MVC 3 will RTM in less than 2 weeks from today: ASP.NET MVC 2: Strongly Typed Html Helpers ASP.NET MVC 2: Model Validation Introducing ASP.NET MVC 3 (Preview 1) Announcing ASP.NET MVC 3 Beta and NuGet (nee NuPack) Announcing ASP.NET MVC 3 Release Candidate 1  Announcing ASP.NET MVC 3 Release Candidate 2 Introducing Razor – A New View Engine for ASP.NET ASP.NET MVC 3: Layouts with Razor ASP.NET MVC 3: New @model keyword in Razor ASP.NET MVC 3: Server-Side Comments with Razor ASP.NET MVC 3: Razor’s @: and <text> syntax ASP.NET MVC 3: Implicit and Explicit code nuggets with Razor ASP.NET MVC 3: Layouts and Sections with Razor IIS and Web Server Stack The IIS and Web Stack teams have made a bunch of great improvements to the core web server this year: Fix Common SEO Problems using the URL Rewrite Extension Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Introducing IIS Express SQL CE 4 (New Embedded Database Support with ASP.NET) Introducing Web Matrix EF Code First EF Code First is a really nice new data option that enables a very clean code-oriented data workflow: Announcing Entity Framework Code-First CTP5 Release Class-Level Model Validation with EF Code First and ASP.NET MVC 3 Code-First Development with Entity Framework 4 EF 4 Code First: Custom Database Schema Mapping Using EF Code First with an Existing Database jQuery and AJAX Contributions My team began making some significant source code contributions to the jQuery project this year: jQuery Templates, Data Link and Globalization Accepted as Official jQuery Plugins jQuery Templates and Data Linking (and Microsoft contributing to jQuery) jQuery Globalization Plugin from Microsoft Patches and Hot Fixes Some useful fixes you can download prior to VS 2010 SP1: Patch for Cut/Copy “Insufficient Memory” issue with VS 2010 Patch for VS 2010 Find and Replace Dialog Growing Patch for VS 2010 Scrolling Context Menu Videos of My Talks Some recordings of technical talks I’ve done this year: ASP.NET 4, ASP.NET MVC, and Silverlight 4 Talks I did in Europe VS 2010 and ASP.NET 4 Web Forms Talk in Arizona Other About Technical Debates (and ASP.NET Web Forms and ASP.NET MVC debates in particular) ASP.NET Security Fix Now on Windows Update Upcoming Web Camps I’d like to say a big thank you to everyone who follows my blog – I really appreciate you reading it (the comments you post help encourage me to write it).  See you in the New Year! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• MEF CompositionInitializer for WPF

  - by Reed

  The Managed Extensibility Framework is an amazingly useful addition to the .NET Framework.  I was very excited to see System.ComponentModel.Composition added to the core framework.  Personally, I feel that MEF is one tool I’ve always been missing in my .NET development. Unfortunately, one perfect scenario for MEF tends to fall short of it’s full potential is in Windows Presentation Foundation development.  In particular, there are many times when the XAML parser constructs objects in WPF development, which makes composition of those parts difficult.  The current release of MEF (Preview Release 9) addresses this for Silverlight developers via System.ComponentModel.Composition.CompositionInitializer.  However, there is no equivalent class for WPF developers. The CompositionInitializer class provides the means for an object to compose itself.  This is very useful with WPF and Silverlight development, since it allows a View, such as a UserControl, to be generated via the standard XAML parser, and still automatically pull in the appropriate ViewModel in an extensible manner.  Glenn Block has demonstrated the usage for Silverlight in detail, but the same issues apply in WPF. As an example, let’s take a look at a very simple case.  Take the following XAML for a Window: <Window x:Class="WpfApplication1.MainView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="220" Width="300"> <Grid> <TextBlock Text="{Binding TheText}" /> </Grid> </Window> This does nothing but create a Window, add a simple TextBlock control, and use it to display the value of our “TheText” property in our DataContext class.  Since this is our main window, WPF will automatically construct and display this Window, so we need to handle constructing the DataContext and setting it ourselves. We could do this in code or in XAML, but in order to do it directly, we would need to hard code the ViewModel type directly into our XAML code, or we would need to construct the ViewModel class and set it in the code behind.  Both have disadvantages, and the disadvantages grow if we’re using MEF to compose our ViewModel. Ideally, we’d like to be able to have MEF construct our ViewModel for us.  This way, it can provide any construction requirements for our ViewModel via [ImportingConstructor], and it can handle fully composing the imported properties on our ViewModel.  CompositionInitializer allows this to occur. We use CompositionInitializer within our View’s constructor, and use it for self-composition of our View.  Using CompositionInitializer, we can modify our code behind to: public partial class MainView : Window { public MainView() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); } [Import("MainViewModel")] public object ViewModel { get { return this.DataContext; } set { this.DataContext = value; } } } We then can add an Export on our ViewModel class like so: [Export("MainViewModel")] public class MainViewModel { public string TheText { get { return "Hello World!"; } } } MEF will automatically compose our application, decoupling our ViewModel injection to the DataContext of our View until runtime.  When we run this, we’ll see: There are many other approaches for using MEF to wire up the extensible parts within your application, of course.  However, any time an object is going to be constructed by code outside of your control, CompositionInitializer allows us to continue to use MEF to satisfy the import requirements of that object. In order to use this from WPF, I’ve ported the code from MEF Preview 9 and Glenn Block’s (now obsolete) PartInitializer port to Windows Presentation Foundation.  There are some subtle changes from the Silverlight port, mainly to handle running in a desktop application context.  The default behavior of my port is to construct an AggregateCatalog containing a DirectoryCatalog set to the location of the entry assembly of the application.  In addition, if an “Extensions” folder exists under the entry assembly’s directory, a second DirectoryCatalog for that folder will be included.  This behavior can be overridden by specifying a CompositionContainer or one or more ComposablePartCatalogs to the System.ComponentModel.Composition.Hosting.CompositionHost static class prior to the first use of CompositionInitializer. Please download CompositionInitializer and CompositionHost for VS 2010 RC, and contact me with any feedback. Composition.Initialization.Desktop.zip Edit on 3/29: Glenn Block has since updated his version of CompositionInitializer (and ExportFactory<T>!), and made it available here: http://cid-f8b2fd72406fb218.skydrive.live.com/self.aspx/blog/Composition.Initialization.Desktop.zip This is a .NET 3.5 solution, and should soon be pushed to CodePlex, and made available on the main MEF site.

  Read the article

• Sun Fire X4270 M3 SAP Enhancement Package 4 for SAP ERP 6.0 (Unicode) Two-Tier Standard Sales and Distribution (SD) Benchmark

  - by Brian

  Oracle's Sun Fire X4270 M3 server achieved 8,320 SAP SD Benchmark users running SAP enhancement package 4 for SAP ERP 6.0 with unicode software using Oracle Database 11g and Oracle Solaris 10. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat both IBM Flex System x240 and IBM System x3650 M4 server running DB2 9.7 and Windows Server 2008 R2 Enterprise Edition. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the HP ProLiant BL460c Gen8 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 6%. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat Cisco UCS C240 M3 server running SQL Server 2008 and Windows Server 2008 R2 Datacenter Edition by 9%. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the Fujitsu PRIMERGY RX300 S7 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 10%. Performance Landscape SAP-SD 2-Tier Performance Table (in decreasing performance order). SAP ERP 6.0 Enhancement Pack 4 (Unicode) Results (benchmark version from January 2009 to April 2012) System OS Database Users SAPERP/ECCRelease SAPS SAPS/Proc Date Sun Fire X4270 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Oracle Solaris 10 Oracle Database 11g 8,320 20096.0 EP4(Unicode) 45,570 22,785 10-Apr-12 IBM Flex System x240 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,960 20096.0 EP4(Unicode) 43,520 21,760 11-Apr-12 HP ProLiant BL460c Gen8 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,865 20096.0 EP4(Unicode) 42,920 21,460 29-Mar-12 IBM System x3650 M4 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,855 20096.0 EP4(Unicode) 42,880 21,440 06-Mar-12 Cisco UCS C240 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 DE SQL Server 2008 7,635 20096.0 EP4(Unicode) 41,800 20,900 06-Mar-12 Fujitsu PRIMERGY RX300 S7 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,570 20096.0 EP4(Unicode) 41,320 20,660 06-Mar-12 Complete benchmark results may be found at the SAP benchmark website http://www.sap.com/benchmark. Configuration and Results Summary Hardware Configuration: Sun Fire X4270 M3 2 x 2.90 GHz Intel Xeon E5-2690 processors 128 GB memory Sun StorageTek 6540 with 4 * 16 * 300GB 15Krpm 4Gb FC-AL Software Configuration: Oracle Solaris 10 Oracle Database 11g SAP enhancement package 4 for SAP ERP 6.0 (Unicode) Certified Results (published by SAP): Number of benchmark users: 8,320 Average dialog response time: 0.95 seconds Throughput: Fully processed order line: 911,330 Dialog steps/hour: 2,734,000 SAPS: 45,570 SAP Certification: 2012014 Benchmark Description The SAP Standard Application SD (Sales and Distribution) Benchmark is a two-tier ERP business test that is indicative of full business workloads of complete order processing and invoice processing, and demonstrates the ability to run both the application and database software on a single system. The SAP Standard Application SD Benchmark represents the critical tasks performed in real-world ERP business environments. SAP is one of the premier world-wide ERP application providers, and maintains a suite of benchmark tests to demonstrate the performance of competitive systems on the various SAP products. See Also SAP Benchmark Website Sun Fire X4270 M3 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Two-tier SAP Sales and Distribution (SD) standard SAP SD benchmark based on SAP enhancement package 4 for SAP ERP 6.0 (Unicode) application benchmark as of 04/11/12: Sun Fire X4270 M3 (2 processors, 16 cores, 32 threads) 8,320 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, Oracle 11g, Solaris 10, Cert# 2012014. IBM Flex System x240 (2 processors, 16 cores, 32 threads) 7,960 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012016. IBM System x3650 M4 (2 processors, 16 cores, 32 threads) 7,855 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012010. Cisco UCS C240 M3 (2 processors, 16 cores, 32 threads) 7,635 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 DE, Cert# 2012011. Fujitsu PRIMERGY RX300 S7 (2 processors, 16 cores, 32 threads) 7,570 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012008. HP ProLiant DL380p Gen8 (2 processors, 16 cores, 32 threads) 7,865 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012012. SAP, R/3, reg TM of SAP AG in Germany and other countries. More info www.sap.com/benchmark

  Read the article

• Required Skill Sets Of A Software Architect

  The question has been asked as to what is the required skill sets of a software architect. The answer to this is that it truly depends. When I state that it depend, it depends on the organization, industry, and skill sets available on the open market and internally within a company. With open ended skill sets even Napoleon Dynamite could be an architect. Napoleon Dynamite’s Skills Pedro: Have you asked anybody yet? Napoleon Dynamite: No, but who would? I don't even have any good skills. Pedro: What do you mean? Napoleon Dynamite: You know, like nunchuck skills, bow hunting skills, computer hacking skills... Girls only want boyfriends who have great skills. Pedro: Aren't you pretty good at drawing, like animals and warriors and stuff? This example might be a little off base but it does illustrate a point. What are the real required skills of a software architect? In my opinion, an architect needs to demonstrate the knowledge of the following three main skill set categories so that they are successful. General Skill Sets of an Architect Basic Engineering Skills Organizational  Skills Interpersonal Skills Basic Engineering Skills are a very large part of what a software architect deal with on a daily bases when designing or updating systems. Think about it, how good would a lead mechanic be if they did not know how to fix or repair cars? They would not be, and that is my point that architects need to have at least some basic skills regarding engineering. The skills listed below are generic in nature because they change from job to job, so in this discussion I am trying to focus more on generalities so that anyone can apply this information to their individual situation. Common Basic Engineering Skills Data Modeling Code Creation Configuration Testing Deployment/Publishing System and Environment Knowledge Organizational Skills If an Architect works for or with an origination then they will need strong organization skills to survive. An architect is no use to a project if the project is missed managed. Additionally, budgets and timelines can really affect a company and their products when established deadlines are repeated not meet. By not meeting these timelines a company is forced to cancel the project and waste all the money and time spent or spend more money until it is completed, if it is ever completed. Common Organizational Skills Project Management Estimation (Cost and Time) Creation and Maintenance of Accepted Standards Interpersonal Skills For me personally Interpersonal skill ranks above the other types of skill sets because an architect can quickly pick up the other two skill sets by communicating with other team/project members so that they are quickly up to speed on a project. Additionally, in order for an architect to manage a project or even derive rough estimates they will more than likely have to consult with others actually working on the code (Programmers/Software Engineers) to get there estimates since they will be the ones actually working on the changes to be implemented. Common Interpersonal Skills Good Communicator Focus on projects success over personal Honors roles within a team Reference: Taylor, R. N., Medvidovic, N., & Dashofy, E. M. (2009). Software architecture: Foundations, theory, and practice Hoboken, NJ: John Wiley & Sons

  Read the article

• Bluetooth DUN Tethering fails

  - by tacone

  I have an HTC Desire HD, with Android Froyo (2.2) and PDANet installed. I am using Ubuntu 10.10. I cannot tether it over Bluetooth either with Network Manager or BlueMan. (note, I installed Blueman only after failing with NetWork manager, and I even tried the last version from the PPA). With both my device is discovered, paired, setup. But connecting always fail. Network manager says it cannot get the details of my device Blueman says Connection Refused (111) Here are some relevant entries from syslog. Mar 11 22:13:00 tacone-macbook bluetoothd[2242]: Bluetooth deamon 4.69 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting SDP server Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting experimental netlink support Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to find Bluetooth netlink family Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to init netlink plugin Mar 11 22:13:00 tacone-macbook kernel: [ 158.284357] Bluetooth: L2CAP ver 2.14 Mar 11 22:13:00 tacone-macbook kernel: [ 158.284361] Bluetooth: L2CAP socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.446781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Mar 11 22:13:00 tacone-macbook kernel: [ 158.446784] Bluetooth: BNEP filters: protocol multicast Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 registered Mar 11 22:13:00 tacone-macbook kernel: [ 158.569481] Bluetooth: SCO (Voice Link) ver 0.6 Mar 11 22:13:00 tacone-macbook kernel: [ 158.569484] Bluetooth: SCO socket layer initialized Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 up Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting security manager 0 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: ioctl(HCIUNBLOCKADDR): Invalid argument (22) Mar 11 22:13:00 tacone-macbook kernel: [ 158.818600] Bluetooth: RFCOMM TTY layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818607] Bluetooth: RFCOMM socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818610] Bluetooth: RFCOMM ver 1.11 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Adapter /org/bluez/2242/hci0 has been enabled Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from ListDevices reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:13:00 tacone-macbook NetworkManager[1247]: <warn> bluez error getting adapter properties: Rejected send message, 1 matched rules; type="method_call", sender=":1.4" (uid=0 pid=1247 comm="NetworkManager) interface="org.bluez.Adapter" member="GetProperties" error name="(unset)" requested_reply=0 destination="org.bluez" (uid=0 pid=2242 comm="/usr/sbin/bluetoothd)) Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: return_link_keys (sba=00:23:6C:B5:03:6F, dba=00:23:6C:C0:F1:B0) Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:02 tacone-macbook bluetoothd[2243]: Discovery session 0x2262d7c0 with :1.45 activated Mar 11 22:15:15 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:15 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: io_capa_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:17 tacone-macbook bluetoothd[2243]: io_capa_response (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:18 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_notify (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE, type=5) Mar 11 22:15:28 tacone-macbook kernel: [ 306.585725] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.630757] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: Authentication requested Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:28 tacone-macbook kernel: [ 306.784829] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.857861] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: last message repeated 8 times Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:30 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0): probe requested by plugin 'Generic' Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:49 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:16:15 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:16:19 tacone-macbook kernel: [ 357.375108] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.169506] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.215529] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.281559] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.330588] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Any help ? PS: tethering via USB or WiFi is not an option, I need to do it over Bluetooth.

  Read the article

• Exploring packages in code

  In my previous post Searching for tasks with code you can see how to explore the control flow side of packages, drilling down through containers, task, and event handlers, but it didn’t cover the data flow. I recently saw a post on the MSDN forum asking how to edit an existing package programmatically, and the sticking point was how to find the the data flow and the components inside. This post builds on some of the previous code and shows how you can explore all objects inside a package. I took the sample Task Search application I’d written previously, and came up with a totally pointless little console application that just walks through the package and writes out the basic type and name of every object it finds, starting with the package itself e.g. Package – MyPackage . The sample package we used last time showed nested objects as well an event handler; a OnPreExecute event tucked away on the task SQL In FEL. The output of this sample tool would look like this: PackageObjects v1.0.0.0 (1.0.0.26627) Copyright (C) 2009 Konesans Ltd Processing File - Z:\Users\Darren Green\Documents\Visual Studio 2005\Projects\SSISTestProject\EventsAndContainersWithExe cSQLForSearch.dtsx Package - EventsAndContainersWithExecSQLForSearch For Loop - FOR Counter Loop Task - SQL In Counter Loop Sequence Container - SEQ For Each Loop Wrapper For Each Loop - FEL Simple Loop Task - SQL In FEL Task - SQL On Pre Execute for FEL SQL Task Sequence Container - SEQ Top Level Sequence Container - SEQ Nested Lvl 1 Sequence Container - SEQ Nested Lvl 2 Task - SQL In Nested Lvl 2 Task - SQL In Nested Lvl 1 #1 Task - SQL In Nested Lvl 1 #2 Connection Manager – LocalHost The code is very similar to what we had previously, but there are a couple of extra bits to deal with connections and to look more closely at a task and see if it is a Data Flow task. For connections your just examine the package's Connections collection as shown in the abridged snippets below. First you can see the call to the ProcessConnections method, followed by the method itself. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { // Write out the package name Console.WriteLine("Package - {0}", package.Name); ... More ... // Look and the connections ProcessConnections(package.Connections); } private static void ProcessConnections(Connections connections) { foreach (ConnectionManager connectionManager in connections) { Console.WriteLine("Connection Manager - {0}", connectionManager.Name); } } What we didn’t see in the sample output above was anything to do with the Data Flow, but rest assured the code now handles it too. The following snippet shows how each task is examined to see if it is a Data Flow task, and if so we can then loop through all of the components inside the data flow. private static void ProcessTaskHost(TaskHost taskHost) { if (taskHost == null) { return; } Console.WriteLine("Task - {0}", taskHost.Name); // Check if the task is a Data Flow task MainPipe pipeline = taskHost.InnerObject as MainPipe; if (pipeline != null) { ProcessPipeline(pipeline); } } private static void ProcessPipeline(MainPipe pipeline) { foreach (IDTSComponentMetaData90 componentMetadata in pipeline.ComponentMetaDataCollection) { Console.WriteLine("Pipeline Component - {0}", componentMetadata.Name); // If you wish to make changes to the component then you should really use the managed wrapper. // CManagedComponentWrapper wrapper = componentMetadata.Instantiate(); // wrapper.SetComponentProperty("PropertyName", "Value"); } } Hopefully you can see how we get a reference to the Data Flow task, and then use the ComponentMetaDataCollection to find out what components we have inside the pipeline. If you wanted to know more about the component you could look at the ObjectType or ComponentClassID properties. After that it gets a bit harder and you should get a reference to the wrapper object as the comment suggest and start using the properties, just like you would in the create packages samples, see our Code Development category for some for these examples. Download Sample code project PackageObjects.zip (5KB)

  Read the article

• Silverlight Firestarter thoughts, and thanks to one and all!

  - by Dave Campbell

  A few metrics that of course got out of hand, but some may find interesting:   1/2 My share of the MVP of the Year award in February of 2009 with Laurent Bugnion 2 Number of degrees I hold: B.S., M.S. Electrical Engineering 3 Number of years in the U.S. Army 3.5 Number of years SilverlighCream has been posted 4 Number of times awarded MVP 6 Number of professional positions I've worked: Antenna Rigger, Boilermaker, Musician, Electronic Technician, Hardware Engineer, Software Engineer 16 Number of companies I've worked for during my career as an Engineer 19 Age at which I turned my first line of code 28 Age at which I hit the workforce as an Engineer 33 Number of years working as an Engineer 43 Number of years writing code 62 Number of years since instantiation 116 Number of tags to search SilverlightCream with 645 Number of blogs I view to find articles (at this moment) 664 Number of articles tagged wp7dev at SilverlightCream right now 700 Number of Twitter followers for WynApse 981 Number of individual bloggers in the SilverlightCream database 1002 Number of SilverlightCream blogposts 1100 Number of people live in Redmond for the Firestarter (I think) 1428 Number of total blogposts at GeeksWithBlogs (not counting this one) 4200 Number of Feedburner subscribers (approximately) 6500 Number of Twitter followers for SilverlightNews (approximately) 7087 Number of posts tagged and aggregated at SilverlightCream right now 13000 Number of people registered to watch the Firestarter online (I think) The overwhelming feeling I have returning from the Silverlight Firestarter: Priceless There is absolutely no way that I could personally thank everyone that over the last few years has held their hand out and offered me a step up to get to the point that Scott Guthrie called me out in his keynote. So I'm just going to hit the highlights here... Scott Guthrie Thanks for not only being the level you are at Microsoft, but for being so approachable, easy to talk to, willing to help everyone, and above all knowledgable. My first level manager at my last position asked if Visual Studio was a graphics program... and you step up to a laptop at a conference and type "File->New Program" ... 'nuff said... oh yeah, thanks for the shoutout! John Papa Thanks for being a good friend, ramroding the Firestarter, being a great guy to be around, and for the poster... holy crap is that cool. Tim Heuer Thanks for all you did as a great DE in Phoenix, and for helping out so many of us, of course being a great guy, and for the poster as well... I think you and John shared that task. In no order at all my buddy Michael Washington, Laurent Bugnion (the other half of the first Silverlight MVP of the Year) Tim Sneath, Mike Harsh, Chad Campbell and Bryant Likes (from back in the day), Adam Kinney, Jesse Liberty, Jeff Paries, Pete Brown, András Velvárt, David Kelly, Michael Palermo, Scott Cate, Erik Mork, and on and on... don't feel bad if your name didn't appear, I have simply too many supporters to name. Silverlight Firestarter Indeed All the people mentioned here, and all the MVPs knew Silverlight was NOT dead, but because of a very unfortunate circumstance, the popular media opinion became that. Consequently the Firestarter exploded from a laid-back event to a global conference. People worked their ass off getting bits ready and presentations using those bits. All to stem the flow of misinformation. All involved please accept my personal thanks for an absolutely awesome job. I had the priviledge of watching the 'prep' on Wednesday afternoon, and was blown away the first time I saw the 3D demo... and have been blown away every time I've seen it since. Not to mention all the other goodness in Silverlight 5. Yes I hit 1000 on my blog, but more importantly, all of you are blogging and using Silverlight, and Microsoft hit one completely out of the park... no... they knocked it out of the neighborhood with the Firestarter. It was amazing to be there for it, and it will be awesome to use the new bits as we get them. Keep reading, there's tons more to come with Silverlight and SilverlightCream following along behind. As usual, this old hacker is humbled to be allowed to play with all the cool kids... Thanks one and all for everything, and Stay in the 'Light

  Read the article

• SQL Server service accounts and SPNs

  - by simonsabin

  Service Principal Names (SPNs) are a must for kerberos authentication which is a must when using sharepoint, reporting services and sql server where you access one server that then needs to access another resource, this is called the double hop. The reason this is a complex problem is that the second hop has to be done with impersonation/delegation. For this to work there needs to be a way for the security system to make sure that the service in the middle is allowed to impersonate you, after all you are not giving the service your password. To do this you need to be using kerberos. The following is my simple interpretation of how kerberos works. I find the Kerberos documentation rediculously complex so the following might be sligthly wrong but I think its close enough. Keberos works on a ticketing system, the prinicipal is that you get a security token from AD and then you can pass that to the service in the middle which can then use that token to impersonate you. For that to work AD has to be able to identify who is allowed to use the token, in this case the service account.But how do you as a client know what service account the service in the middle is configured with. The answer is SPNs. The SPN is the mapping between your logical connection to the service account. One type of SPN is for the DNS name for the server and the port. i.e. MySQL.mydomain.com and 1433. You can see how this maps to SQL Server on that server, but how does it map to the account. Well it can be done in two ways, either you can have a mapping defined in AD or AD can use a default mapping (this is something I didn't know about). To map the SPN in AD then you have to add the SPN to the user account, this is documented in the first link below either directly or using a tool called SetSPN. You might say that is complex, well it is and thats why SQL Server tries to do it for you, at start up it tries to connect to AD and set the SPN on the account it is running as, clearly that can only happen IF SQL is running as a domain account AND importantly it has permission to do so. By default a normal domain user account doesn't have the correct permission, and is why so many people have this problem. If the account is a domain admin then it will have permission, but non of us run SQL using domain admin accounts do we. You might also note that the SPN contains the port number (this isn't a requirement now in sql 2008 but I won't go into that), so if you set it manually and you are using dynamic ports (the default for a named instance) what do you do, well every time the port changes you need to change the SPN allocated to the account. Thats why its advised to let SQL Server register the SPN itself. You may also have thought, well what happens if I change my service account, won't that lead to two accounts with the same SPN. Possibly. Having two accounts with the same SPN is definitely a problem. Why? Well because if there are two accounts Kerberos can't identify the exact account that the service is running as, it could be either account, and so your security falls back to NTLM. SETSPN is useful for finding duplicate SPNs Reading this you will probably be thinking Oh my goodness this is really difficult. It is however I've found today in investigating something else that there is an easy option. Use Network Service as your service account. Network Service is a special account and is tied to the computer. It appears that Network Service has the update rights to AD to set an SPN mapping for the computer account. This then allows the SPN mapping to work. I believe this also works for the local system account. To get all the SPNs in your AD run the following, it could be a large file, so you might want to restrict it to a specific OU, or CN ldifde -d "DC=<domain>" -l servicePrincipalName -F spn.txt You will read in the links below that you need SQL to register the SPN this is done how to use Kerberos authenticaiton in SQL Server - http://support.microsoft.com/kb/319723 Using Kerberos with SQL Server - http://blogs.msdn.com/sql_protocols/archive/2005/10/12/479871.aspx Understanding Kerberos and NTLM authentication in SQL Server Connections - http://blogs.msdn.com/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx Summary The only reason I personally know to use a domain account is when you can't get kerberos to work and you want to do BULK INSERT or other network service that requires access to a a remote server. In this case you have to resort to using SQL authentication and the SQL Server uses its service account to access the remote service, and thus you need a domain account. You migth need this if using some forms of replication. I've always found Kerberos awkward to setup and so fallen back to this domain account approach. So in summary to get Kerberos to work try using the network service or local system accounts. For a great post from the Adam Saxton of the SQL Server support team go to http://blogs.msdn.com/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx 

  Read the article

• SQL SERVER – SQL Server Misconceptions and Resolution – A Practical Perspective – TechEd 2012 India

  - by pinaldave

  TechEd India 2012 is just around the corner and I will be presenting there in two different sessions. On the very first day of this event, my presentation will be all about SQL Server Misconceptions and Resolution – A Practical Perspective. The dictionary tells us that a “misconception” means a view or opinion that is incorrect and is based on faulty thinking or understanding. In SQL Server, there are so many misconceptions. In fact, when I hear some of these misconceptions, I feel like fainting at that very moment! Seriously, at one time, I came across the scenario where instead of using INSERT INTO…SELECT, the developer used CURSOR believing that cursor is faster (duh!). Here is the link the blog post related to this. Pinal and Vinod in 2009 I have been presenting in TechEd India for last three years. This is my fourth opportunity to present a technical session on SQL Server. Just like the previous years, I decided to present something different. Here is a novelty of this year: I will be presenting this session with Vinod Kumar. Vinod Kumar and I have a great synergy when we work together. So far, we have written one SQL Server Interview Questions and Answers book and 2 video courses: (1) SQL Server Questions and Answers (2) SQL Server Performance: Indexing Basics. Pinal and Vinod in 2011 When we sat together and started building an outline for this course, we had many options in mind for this tango session. However, we have decided that we will make this session as lively as possible while keeping it natural at the same time. We know our flow and we know our conversation highlight, but we do not know what exactly each of us is going to present. We have decided to challenge each other on stage and push each other’s knowledge to the verge. We promise that the session will be entertaining with lots of SQL Server trivia, tips and tricks. Here are the challenges that I’ll take on: I will puzzle Vinod with my difficult questions I will present such misconception that Vinod will have no resolution for it. I need your help.  Will you help me stump Vinod? If yes, come and attend our session and join me to prove that together we are superior (a friendly brain clash, but we must win!). SQL Server enthusiasts and SQL Server fans are going to have gala time at #TechEdIn as we have a very solid lineup of the speaker and extremely interesting sessions at TechEdIn. Read the complete blog post of Vinod. Session Details Title: SQL Server Misconceptions and Resolution – A Practical Perspective (Add to Calendar) Abstract: “Earth is flat”! – An ancient common misconception, which has been proven incorrect as we progressed in modern times. In this session we will see various database misconceptions prevailing and their resolution with the aid of the demos. In this unique session audience will be part of the conversation and resolution. Date and Time: March 21, 2012, 15:15 to 16:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >