Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 219/788 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• Problem with setting up raid5 on Freenas, Please help.

  - by Benjy23

  Hey Guys, I've been running Freenas for awhile now. Hardware is 1.8celeron Ram 1GB Sata Card is Via - not sure the model.... its 2 ports and I have 6 x 1.5TB HDs All ran ok while running on 1.5TB, no raid. I'm now trying to create a raid5 with my 6 hds. Software raid... is it normal for it to take roughly up to 2 weeks just to build the raid? Sorry, I'm very new to implementing raid and googling doesn't tell much other than it takes a long time. Also the Raid building process seems to fail many times... going to degraded. I suspect its cos 4 of my HDs are connected to my motherboard and the other 2 are connected to my sata card...what's your take? I'm considering 2 options now... either get a 8 port sata card and attach all the HDs to it. Or get a raid controller 8 portcard which is probably gonna be more pricey... also how do you access hardware raid through Freenas? I like how Freenas emails you should your harddrive fails so can this be done as well with hardware raid? Thanks in advance guys.

  Read the article

• OpenVZ with brdiged interfaces and VLAN

  - by Deimosfr

  Hi, I've got a problem with OpenVZ with brdiged VLAN. Here is my configuration : +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN working on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110 : inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seams working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks like ok, but when I start my VE, here is the message : ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please ? Thanks

  Read the article

• Diagnosing a BSOD involving USB

  - by David Ebbo

  [Running Win7 Ultimate 64 bit] My new HP Pavilion Elite HPE-450t has been plagued by BSDO crashes since I got it about 5 weeks ago. The crashes are somewhat rare, sometimes not occurring for 3 or 4 days. I have spent a lot of time trying to isolate the device that could be at fault, but I have seen crashes with only the keyboard and mouse plugged in (as USB devices), and I tried two sets of keyboard/mouse, so I'm running out of ideas. :( The WhoCrashed tool gave this info about my latest BSOD: crash dump file: C:\Windows\Minidump\121310-11887-01.dmp This was probably caused by the following module: usbport.sys (USBPORT+0x2DE4E) Bugcheck code: 0xFE (0x5, 0xFFFFFA8008F571A0, 0x80863B34, 0xFFFFFA80092F2510) Error: BUGCODE_USB_DRIVER file path: C:\Windows\system32\drivers\usbport.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB 1.1 & 2.0 Port Driver Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. I looked at http://msdn.microsoft.com/en-us/library/ff560407(VS.85).aspx, and for Parameter1 = 0x5, it says "A hardware failure has occurred due to a bad physical address found in a hardware data structure. This is not due to a driver bug". Should I conclude that it's a hardware issue in the machine itself, rather than a bad USB driver or USB device? Here is the MiniDump, in case someone can get more info out of it: http://ewt52q.blu.livefilestore.com/y1peS4Ce8nSK1SXghzMDoxDWXlaEu-EKCJsv25y8y5DXXIUzZ9U0_tYgFJXd939fykwa0zRmx98IW0PYG18GioqKAuARYjtspSA/121310-11887-01.dmp?download&psid=2

  Read the article

• my X server doesn't load a module called "glx", but my video drivers seem to be installed

  - by rumtscho

  I just got a new, very wide monitor (2560x1440) and there is no sense maximizing my applications. So I installed Compiz Config Settings Manager and enabled Grid. Nothing happened, the shortcuts don't move application windows. Went to System - Preferences - Appearance, the Visual effects tab. It at "disabled". When I try to set them to "normal" or "extra", a message box appears telling me that it's searching for video drivers, then disappears, and I get an error message "Desktop effects could not be enabled". I opened Xorg.0.log, and had errors there: (EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so (II) UnloadModule: "glx" (EE) Failed to load module "glx" (loader failed, 7) (II) LoadModule: "extmod" Going to Administration - System - Hardware drivers, it said that there are no available and/or installed hardware drivers. But apt-get said that it cannot install nvidia-glx-185, as it is already installed. Googling my error message suggested that I install and run something called envyng. This let me install the nvidia drivers again, and now I can see in the Hardware Drivers window that they are installed and active. But the error message in Xorg.0.log remains, and I still cannot enable the Compiz effects or use Grid. Now, I don't have enough Linux experience to understand if this is a single cause-effect-chain of problems, or three independent ones, but I'd appreciate help for any of them. I am running Ubuntu 9.10, the video card is a GeForce 7600GS.

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

• Forward mDns from one subnet to another?

  - by user37278

  Is there an ipfw rule that can easily forward mDns packets from one subnet to another? I have a Snow Leopard Server machine serving as the gateway between the two subnets and would like for machines in each subnet to see the services available in the other subnet. The gateway machine is already confirmed as configured correctly such that packets route correctly between the two subnets (ping works, traceroute shows the subnet hop, etc). My problem in designing a ipfw rule is that I don't know how to instruct that I would like multicast packets addressed to 224.0.0.251:5353 on en0 to be addressed to the same ip/port but on fw0 (the other interface). I attempted a rule such as fwd 192.168.10.1 log udp from 192.168.1.0/24 to 224.0.0.251 recv en1 to force the packet to hop over to the other interface (from en1 to fw0), but no dice. The ipfw log shows that the rule is being triggered by packets, but tcpdump isn't showing any packets on the other interface. Also, the only other firewall rules in place are the divert port 8668 and rule #65535 "allow any to any". Any suggestions? Thanks.

  Read the article

• Vyatta internet connection + hosted site on same IP

  - by boburob

  Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

  Read the article

• virtualbox instances dedicated-server with custom dnsmasq

  - by ovanes

  I have dedicated server where I planned to run virtualbox virtual machines. Since the VMs are managed with vagrant/chef I may end up with many different ones. I thought it would be a great idea to deploy a dnsmasq on the server, which is going to dynamically assign the ip addresses to the VMs. Since each Vagrant/Chef recipe is configured to set the VM's host name I can find/reference the appropriate VM by the host name. Finally, the entire infrastructure is not directly accessible via internet, so the dedicated Server is the OpenVPN host. So the entire infrastructure may be seen as: +-------------------------------------+ | Dedicated Server | | | | +-------------+ +------------+ | +------------------+ | | DNSMasq | | OpenVPN |<==========>| Client | | +-------------+ +------------+ | | | | ^ ^ | +------------------+ | | | | | +--+ | | | | +-------+ | | | | VM1 | | | | +-------+ | | | ... | | | +-------+ | | +-| VM2 | | | +-------+ | +-------------------------------------+ Now some questions which I am struggling with: Are there any other suggestions to access private infrastructure, because I don't want to reinvent the wheel. On the Dedicated Server I don't see the vboxnet0 interface but VirtualBox is installed without GUI. Accessing of virtual boxes via ssh works fine. Did I miss smth? DNSMasq must serve the local VMs only, otherwise there is a chance that local DNSMasq start to serve other server's on the network, what I don't want. Because I don't see vboxnet0 I tend to use no-dhcp-interface=eth0 config option. Are there any thoughts on that despite, the fact that a second NW-card (which is not the case), might start serving DHCP-Requests? How should I config the VM's network interface that I am able to access it via OpenVPN and resolve the hostnames using the DNSMasq. I think it should be the host-only network card. Should I do bridging in the OpenVPN config or is it sufficient to use routing.

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Problems with 5.1 digital out on Ubuntu 12.04

  - by user895319

  I've recently bought a new PC, installed Ubuntu and am now unable to get 5.1 digital sound working. Simple analogue stereo works fine on both the front and rear connectors. On my old box I connected the coax connection from my soundcard to my surround sound amplifier, set Settings-Sound to "Digital Stereo Duplex" and it worked. My old soundcard doesn't fit in my new machine so I'm using the built-in sound hardware. I'm connecting the combination output socket on the back of the PC via the same cable to my surround amp as before. The MB is an MSI Global H61M-P31 with an RealTek ALC887 sound chip. When I go to Settings-Sound I only see "Headphone Built-in Audio" and "Analogue Output Built-in Audio" - no digitial options. The output from aplay -l is: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC887-VD Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC887-VD Analog Hardware device with all software conversions While googling for ALC887 I've seen some references to "ALC887 -VD Analog" and some to "ALC887 -VD Digital". Does anyone know if I need to force it to chance mode somehow? It's worth mentioning that when I set the output to 5.1 digital surround in Windows 7 on the same machine I still don't get any sound so it's not a unique Linux problem. Thanks for any help.

  Read the article

• Can't Configure IBM 8275-416 Switch Via Serial

  - by Sean M

  I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

  Read the article

• Are there compact external USB audio interfaces which are better than a on-board sound?

  - by rumtscho

  I am asking this for a friend. He loves his voice recognition software and dictates a lot of text using a headset. Now he has a new laptop, which only has a combined mic/headphones output, and wanted to buy an adapter. I told him to get an external USB sound interface instead, as the better sound quality will probably increase the hit rate of the voice recognition. He agreed, but when he saw a picture of the SoundBlaster X-Fi, he said that it is way too big, because he wants to carry the thing everywhere. He'd rather have one of these small things which are the size of a flash memory stick, with only one mic and one phones output, period. Now I am not sure whether these mini interfaces would produce a sound better than onboard sound. They all seem to come not from established audio interface manufacturers, but from electronic accessories manufacturers like Speedlink, or just noname brands. Is there a compact audio interface with good A/D quality (it is OK if the price is comparable to that of the bigger interfaces, even if there is no additional functionality like Chinch in-/output etc)?. And if there isn't, will the noname soundcardsticks offer any advantage over a simple adaptor for the onboard sound?

  Read the article

• OpenVZ with bridged interfaces and VLAN

  - by Deimosfr

  Hi, I've got a problem with OpenVZ with bridged VLAN. Here is my configuration: +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN work on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110: inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seems to be working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian Lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks OK, but when I start my VE, here is the message: ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please? Thanks

  Read the article

• Dynamically blocking excessive HTTP bandwidth use?

  - by Jeff Atwood

  We were a little surprised to see this on our Cacti graphs for June 4 web traffic: We ran Log Parser on our IIS logs and it turns out this was a perfect storm of Yahoo and Google bots indexing us.. in that 3 hour period, we saw 287k hits from 3 different google ips, plus 104k from yahoo. Ouch? While we don't want to block Google or Yahoo, this has come up before. We have access to a Cisco PIX 515E, and we're thinking about putting that in front so we can dynamically deal with bandwidth offenders without touching our web servers directly. But is that the best solution? I'm wondering if there is any software or hardware that can help us identify and block excessive bandwidth use, ideally in real time? Perhaps some bit of hardware or open-source software we can put in front of our web servers? We are mostly a windows shop but we have some linux skills as well; we're also open to buying hardware if the PIX 515E isn't sufficient. What would you recommend?

  Read the article

• MS Dynamics CRM users disappear

  - by Max Kosyakov

  Recently we came across quite a weird issue. The administrators say that once in a while they notice that user accounts in MS Dynamics CRM are lost . When a new user is added to the system, the administrators add him/her to the Active Directory first. Then, they go to Dynamics CRM interface, then to system configuration -> administration -> users and add the new user to the CRM, add roles to this user, grant them relevant permissions. Then the user is able to use a custom application, which connects to the Dynamics CRM via WCF. After a while (few weeks or months) the user is unable to use the custom application because Dynamics CRM cannot authorise this user. When administrators open the Dynamics CRM user management interface (configuration -> administration -> users ) and browse through the list of CRM users they cannot find the user in the list. When they try to add the user to Dynamics CRM back, the CRM fails with the error message "User already exists". Moreover, the user still exists in the Active Directory. The admins are very sure the user had been added to the CRM before he/she started to work. The only fact the the user was able to use the custom application normally says that the user had been indeed registered in the CRM. How come the user is not listed in the CRM user management interface at all? Have anyone faced any issues like that? Seen or heard of disappearing CRM users somewhere? Any help is appreciated. Where can one start digging?

  Read the article

• nginx redirect proxy

  - by andrew

  I have a web app running on a nginx server on local ip 192.168.0.30:80 I have this in my etc/hosts 127.0.0.1 w.myapp.in If someone accesses my app using a "w" subdomain, it shows a webdav interface, otherwise it runs normally (for example, someone calls http://myapp.in , it goes into the app, and http://w.myapp.in goes into webdav interface - this is done within the app, nginx has nothing to do with it) Because I don't have a dns or anything like that, users must access the app by ip. A problem appears if someone wants to access the webdav interface, because you cannot access the app by a subdomain - unless you write a line in your local hosts file, which is not a solution) A possible solution If it's possible to setup the nginx server so that if someone calls http://192.168.0.30 (on port 80), it goes normally into the app, but if a user tries to access say http://192.168.0.30:81 (another defined port) it redirects internally to w.myapp.in, and the app sees the subdomain Given the app, can this be done? If yes, what should I put in the nginx config file? And if you guys think of a better solution, I'm open to any.

  Read the article

• PCs on domain can not resolve external IP addresses using the DC's DNS Server

  - by Ben

  I currently have a domain controller which handles all DHCP and DNS. The DHCP works just fine and the domain controller itself can use the internet with no issues. However, PCs that are part of the domain are not able to use external websites, only internal. Does anyone have any way I can solve this issue? Thank you Server: Windows Server 2008 R2 PC: Win7 Enterprise x64 Edit: (domain controller) C:\Users\bcollyer>nslookup google.com Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: google.com Addresses: 2a00:1450:4009:809::100e 173.194.41.166 173.194.41.165 173.194.41.169 173.194.41.162 173.194.41.161 173.194.41.160 173.194.41.168 173.194.41.167 173.194.41.164 173.194.41.163 173.194.41.174 Edit 2: C:\Users\bcollyernetstat -rn Interface List 12...30 85 a9 f7 8a 21 ......Atheros AR8161/8165 PCI-E Gigabit Ethernet Control ler (NDIS 6.20) 1...........................Software Loopback Interface 1 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling Adapter IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.0.67 172.16.0.202 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.0.0 255.255.0.0 On-link 172.16.0.202 276 172.16.0.202 255.255.255.255 On-link 172.16.0.202 276 172.16.255.255 255.255.255.255 On-link 172.16.0.202 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.0.202 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.0.202 276 Persistent Routes: None IPv6 Route Table Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link Persistent Routes: None BTW I have no javascript on the server so can't reply to individual answers... Sorry!

  Read the article

• Converting a Windows 2003 server

  - by Jim Bass

  We have a legacy database system based upon MS SQL running on Windows Server 2003. The client software will only run on Windows XP. We have recently had success converting a client into a virtual machine and running it under Fusion on Mac minis. So far, it is working incredibly well. So well, in fact, that we are now considering trying to convert the server to a virtual machine. This raises several questions, though: 1. The server uses a raid array. Does the VM virtualize the raid array? I only ask because in my experience Windows products don't like it when you change core hardware. 2. Is there any reason why running SQL server on a virtual machine won't work? It will be up 24/7. 3. Is there a different converter for servers? 4. Will I have to track down the licensing for MS SQL and Server 2003 or will they come across ok? 5. The company that designed the software is no longer in business. There is some fear that the software is somehow tied to the hardware configuration. We bought the hardware, but their engineers came out and configured the system. Will the virtual machine be able to spoof particular chip sets? Thanks! Jim Bass

  Read the article

• How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

  - by javadba

  I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

  Read the article

• Are SATA II and SATA 3.0 Gbps compatible?

  - by Johnny Maelstrom

  I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

  Read the article

• What is the reason for this DNSSEC validation failure of dnsviz.net?

  - by grifferz

  On trying to resolve dnsviz.net from a host using an Unbound resolver that is configured to use DNSSEC validation, the result is "no servers could be reached": $ dig -t soa dnsviz.net ; <<>> DiG 9.6-ESV-R4 <<>> -t soa dnsviz.net ;; global options: +cmd ;; connection timed out; no servers could be reached Nothing is logged by Unbound to suggest why this is the case. Here is the /etc/unbound/unbound.conf: server: verbosity: 1 interface: 192.168.0.8 interface: 127.0.0.1 interface: ::0 access-control: 0.0.0.0/0 refuse access-control: ::0/0 refuse access-control: 127.0.0.0/8 allow_snoop access-control: 192.168.0.0/16 allow_snoop chroot: "" auto-trust-anchor-file: "/etc/unbound/root.key" val-log-level: 2 python: remote-control: control-enable: yes If I add: module-config: "iterator" (thus disabling DNSSEC validation) then I am able to resolve this host normally. The domain and its DNSSEC check out fine according to http://dnscheck.iis.se/ so there must be something wrong with my resolver configuration. What is it and how do I go about debugging that?

  Read the article

• VMWare use of Gratuitous ARP REPLY

  - by trs80

  I have an ESXi cluster that hosts several Windows Server VMs and around 30 Windows workstation VMs. Packet captures show a high number of ARP replies of the form: -sender_ip: VM IP -sender_mac: VM virtual MAC -target_ip: 0.0.0.0 -target_mac: Switch interface MAC The specific addresses aren't really a concern -- they're all legitimate and we're not having any problems with communications (most of the questions surrounding GARP and VMWare have to do with ping issues, a problem we don't have). I'm looking for an explanation of the traffic pattern in an environment that functions as expected. So the question is why would I see a high number of unsolicited ARP replies? Is this a mechanism VMWare uses for some purpose? What is it? Is there an alternative? EDIT: Quick diagram: [esxi]--[switch vlan]--[inline IDS]--[fw]--(rest of network) The IDS is complaining about these unsolicited ARPs. Several IDS vendors trigger on ARP replies without a prior request, or for ARP replies that have a target IP of 0.0.0.0. The target MAC in these replies is the VLAN interface on the switch. Capture points: -The IDS grabs the offending packets -The FW can see the same ones -A VM on the ESXi host does not see these, although there is an ARP request for a specific IP on the ESXi host that has source_ip=0.0.0.0 and source_mac=[switch vlan interface]. I can't share the captures, unfortunately. Really I'm interested in finding out if this is normal for an ESXi deployment.

  Read the article

• Forward all traffic from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >