Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 219/303 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• Use two networks at the same time?

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

  Read the article

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• best way to host multiple wordpress site on single vps [migrated]

  - by Ben

  Not sure if this is webmaster or a WordPress question, it's a bit half and half, sorry if I'm posting in the wrong place. Without using Multi-Site or installing new WordPress CMS' in second-level domains, what's the best way to get multiple WordPress installs running on my VPS (running Linux powered CentOS 6 with WHM and cPanel)? It's currently working but only by setting the permalinks option to the default setting, so the URLs aren't human-friendly. I have come across something called WPSiteStack, though I'd really rather not go down this route. Long story short, I need the following: Seperate installs so one core / theme / plugin update doesn't affect all sites and increases security of all sites; 'Pretty' permalinks; Each WordPress install must be in the root of it's own domain to ensure that I can accurately measure my clients' quotas; It may also be worth noting that some functions within each install use the $_SERVER['DOCUMENT_ROOT'] and $_SERVER['HOST'] variables. I have already edited the httpd-vhosts.conf, httpd.conf and .htaccess files but this hasn't made any changes. So any ideas what I'm missing or doing wrong? Any help is much appreciated.

  Read the article

• HTG Explains: Which Linux File System Should You Choose?

  - by Justin Garrison

  File systems are one of the layers beneath your operating system that you don’t think about—unless you’re faced with the plethora of options in Linux. Here’s how to make an educated decision on which file system to use. The landscape of the Linux file system support is drastically different from Windows and OS X. In Windows and OS X you can find software that will add support for non-standard file systems, but both operating systems can only be installed on their native file system and third party support is added after the fact. Linux on the other hand has a vast array of supported file systems built into the kernel. But how are you supposed to know which file system to pick when installing? We will take a look at some of the most popular choices available and give you use cases to consider—the choice is ultimately up to you based on your needs. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• CodePlex Daily Summary for Friday, August 08, 2014

  CodePlex Daily Summary for Friday, August 08, 2014Popular ReleasesSpace Engineers Server Manager: SESM V1.13: V1.13 - Added the restore option in the backup manager - Reenabled the map upload for the managersStrata v1.1 - Adobe Photoshop Like graphics editor: Strata 1.1: Version Strata 1.1: Available feutures: Drawing a layer; Adding a layer; Deleting a layer; Moving layers; Changing the order of layers; Hide / show layer; Saving as Project; Saving as Picture format (Jpg, Png, Gif) All interface in russian language. Saving - is Ok, But Opening have some display troublesEssence#: Nile (Alpha Build 20): The Nile release introduces ANSI-conformant streams into Essence#. It also fixes some significant bugs, and provides new utility scripts for use in developing Essence# code. The name Nile was chosen because it's the name of a rather big stream that's mentioned in the Bible--and we've been using a Biblical naming scheme for the Alpha releases. Recall that Moses as a babe was found among reeds along the banks of the Nile. So the Nile is a reed stream... FileStream Usage ExamplesTwo new exa...Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...AutomatedLab: AutomatedLab 2.2.0.0: 2.2.0 Support for Subordinate Certificate Authorities Installing software does no longer use workflows but background jobs, which is much faster Many performance improvements Removing a lab does no longer require to import it first if using the Path parameter Adjusted all sample scripts to work with version 2.x New validators to verify virtual switch settings Bug fixing 2.1.0 Support for external virtual switches CaRoot is a new role for installing Root Certificate Authorities ...babelua: 1.6.5.1: V1.6.5.1 - 2014.8.7New feature: Formatting code; Stability improvement: fix a bug that pop up error "System.Net.WebResponse EndGetResponse";Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Online Resume Parsing Using Aspose.Words for .NET: Resume_Parser: First Release of Resume Parser Application using Aspose.Words for .NET.Blade.Net: 3.0.0.0: Blade.Controls added: collection of MVVM and Prism friendly WPF controls and utilities InteractionRequest based implementation for OpenFile/SafeFile dialogs InteractionRequest based implementation for print dialog Drag&Drop behaviors Focus behaviors TextBox behaviors PopupWindowActionRegionAdapter PropagateInputBindingsToWindowBehavior Blade.Forest added: simple backlog tool Backlog items are structured via drag&drop in one tree Backlog items dragged to and structured in sepa...BBImageHandler - An image generator for DotNetNuke and ASP.NET: 01.06.00: Release notes V 1.6.0Added 2 configuration properties: ServerCacheExpiration (value in seconds,Default: 600 seconds) + ClientCacheExpiration (value in seconds, Default: 300 seconds) Fixed Client Caching (now sending 304 when cache time is not expired) Fixed bug when attaching watermark to indexed image formatRole Based View for Microsoft Dynamic CRM 2011 & 2013: Role based view for MS CRM 2011 Ver. 1.0: One of the very use full features called “Role Based View” in Microsoft Dynamics CRM 2011 & 2013 has been ignored by Microsoft. Now the functionality is provided with this small solution which will allowing you to have different views for an entity that can be assigned to different security roles. For example, Certain Views will not appear for the Sales person since their security level is lower than that of the Sales Manager. However Sales Manager can able to see those additional view.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.New ProjectsBaidu BCS: Baidu BCS (Baidu Cloud Storage) Server SDK. ????????SDK. .NET 4.0 or above. .NET 4.0?????Close Eye Assistant: a Close Eye Assistant using python3Dynamics AX IEIDE Project Explorer: This project is aiming to provide a set of useful features for Dynamics AX developers as well as administrators and is provided as an installable axmodel file.EFlogger - profiler for Entity Framework: Free and simple open source profiler for Entity Framework from 4-6 versionGuitar: i will continue to improve it.jQuery Table Pager Plugin: Simple jQuery plugin to paginate a table. JSJD: ????LFramework: LFrameworkMSDIS MVC Web: Sample ASP.NET MVC 4.0 using AngularJSPJS2: Not complete Powershell implementation in JavaScript.Seemile: SeemileShippety: Shippety is a web application for buying and printing postage labels. It's a client implementation for the EasyPost API written in HTML, Javascript and ASP.NET.Spending Monitor: With this application the user has the ability to create categories, retailers, and payment methods to track their spending in those categories. Strata v1.1 - Adobe Photoshop Like graphics editor: Strata - a graphical editor with layers mechanism similar to Adobe Photoshop. Layer - flat two-dimensional bitmap, where you can draw with the mouse.surfingkata: aTIKSN PowerShell Cmdlets: Bunch of cmdlets developed by TIKSN Lab???????: dfg???????: ????????????????: cvbvcbcv

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• Dealing with three Windows partitions in dual boot installation

  - by Tim

  For dual-boot installation of Ubuntu after Windows. Quoted from ubuntuguide If a Windows boot partition exists as a second NTFS partition, it should be left alone. If there is a Windows recovery partition also installed, it can also be left alone as long as there are only two NTFS partitions total on the hard drive (i.e. there is no NTFS boot partition as well). If there are a total of 3 NTFS partitions on the hard drive, then the third Windows NTFS partition (the recovery partition) should be removed after creating Recovery CDs from it (see here). In the last case where Windows has three partitions, I was wondering why it says the recovery partition shall be removed? Is it possible to keep the three and create another extended partition with several logical partitions for installing Ubuntu and dual-booting the two OSes? I plan to dual-boot install Ubuntu 10.04 with existing Windows 7. Following is the layout of the current partitions of my hard drive viewed from Windows 7: So must I remove the Lenovo_Recovery (Q:) partition for the same reason you give for the first question? Thanks and regards!

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Unity calendar lens not showing events in Ubuntu 12.04

  - by David_G

  I'm trying to get proper/useful calendar integration into Ubuntu 12.04. I have a Google Calendar (& account) and I want to be able to use this without opening the browser. I want to get the Unity Calendar lens working, so that it shows events coming up, and it allows me a quick way to add new events. However, after installing it, it does not find any events, nor allow me to add a new event. Note that I've installed Lightning 1.4, Evolution mirror 0.2.3, Evolution, and unity-calendar lens. I've also installed Calendar-indicator. I suspect that somehow the lens is not getting the calendar information from thunderbird via evolution. A bit of searching around led me to try this command: /usr/lib/calendar-lens/calendar-lens-daemon.py. With this result: /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject Traceback (most recent call last): File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 324, in daemon = Daemon() File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 80, in init for calendar in evolution.ecal.list_calendars(): AttributeError: 'NoneType' object has no attribute 'list_calendars' Any ideas?

  Read the article

• how to properly Install chromium from zip and make it the default browser

  - by ClarifyLinux

  Since the Chromium PPA is no longer maintained, for those of us preferring to use chromium over chrome, we have two options: Build and Install from Source Download either 'beta' or daily builds (in a zip file) Unfortunately for me, option 1 is overly complicated. I know how to compile most any other applications in Ubuntu but I've never been able to get chromium to build correctly. I am currently using option 2. In Chromium I have the Chromium Updater installed (http://goo.gl/ffAMy). This gives me quick access to the most recent 64bit versions. Once downloaded, I install to /home/myuser/opt/chrome-linux. From this directory I can run the chrome binary. It works perfectly except for the fact that I cannot get it to act as my default browser. I've tried, as root, installing the binary in /opt/chrome-linux/ with a symbolic link to the 'chrome' binary in /usr/bin. Unfortunately, this doesn't work as a non root user. So my question is - How do I properly install a downloaded chromium zip build so tht it's listed as an option for the default browser?

  Read the article

• The battery indicator in Unity panel not showing up

  - by user61415

  I installed Ubuntu 12.04 with Wubi. Well after being completely dazzled with the amount of free content in the Software Centre, I decided to go deeper and start messing with settings. Well after changing the screen brightness the highest level I noticed that there wasn't an indicator for how much battery was left in my laptop. I looked up online on got 2 suggestions on how to fix: Right click on the Unity panel and add an indicator Set it to show in the power settings menu. Well I did both when I right click at the top menu nothing comes up and setting it to show does nothing either. Then I tried installing something in the Software Centre. I got something but when I activated it it said I had 0% power left even though I was charging and at %100 according the Light in the front of my laptop. So now I'm thinking that it doesn't even recognise my computer as a laptop which is weird because in the display settings it says my screen size is set to laptop. How can I install it? I don't know what version it is other then Ubuntu 12.04 and no matter what the icon does not appear with the

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• System wide Proxy settings when on a windows network with a password

  - by sav

  I'm using Ubuntu on a windows network. I want to connect to the world wide web. I have followed the steps here which I have found very useful. However when I try to ping a website (eg: ping www.wikipedia.org) I get no reply. I can ping local computers on my network, but I need to go through our proxy to get to the world wide web. I can even browse wikipedia using firefox, I just needed to enter the proxy configuration script location and my username and password. I'm quite sure the reason I'm having this trouble is because I havn't entered a username and password. I'm not sure how to do this on a system wide level. ultimately I would like to be able to use package managers like synaptic but first I need them to be able to connect to the internet. EDIT As sugested I created a /etc/apt/apt.conf file like Acquire::http::Proxy "http://chrisav:[email protected]:8080"; Acquire::https::Proxy "https://chrisav:[email protected]:8080"; Acquire::ftp::Proxy "ftp://chrisav:[email protected]:8080"; Acquire::socks::Proxy "socks://chrisav:[email protected]:8080"; However I still cant ping wikipedia when I try installing stuff I get chris@chris-Ubuntu:~$ sudo apt-get install kate Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package kate

  Read the article

• CodePlex Daily Summary for Saturday, July 20, 2013

  CodePlex Daily Summary for Saturday, July 20, 2013Popular ReleasesC# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.DaRenamer: Renamer 2.1.0.5: Version 2.1.0.5 -fixed minor bugInstall Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0PMU Connection Tester: PMU Connection Tester v4.4.0: This is the current release build of the PMU Connection Tester, version 4.4.0 This version of the connection tester was released with openPDC 1.5 SP1 and openPDC 2.0 BETA. This application requires that .NET 4.0 already be installed on your system. Note this is the last release of the PMU Connection Tester that will built on .NET 4.0 using the TVA Code Library and the Time-series Framework. Future releases of the PMU Connection Tester will be built on .NET 4.5 (or later) using the Grid Sol...HiUpdateTools - easy publish and update your app: HiUpdateTools Add-in 1.0.0.5: - Generate ClientConfig.xml and adding to the project - Set ClientConfig.xml option "CopyToOutputDirectory"= Copy if newer - Fix client path not ending the backslash - Add Client assembly to VSX package - On first use, the tool is added to the reference to the client assembly - Fix client application - Multi-instance application - Run single instance of update applicationopen gaze and mouse analyzer: Ogama 4.4 BETA: This beta was published on 16.07.2013 and includes fixes and improvements since last 4.3 release, mainly in the recording section which solves problems with tobii and mirametrix devices, see the source code tab for details. Please test it, if you have one of this devices and give me feedback using the issue tracker or discussion tabs. Don´t forget to install .Net 4 framework and SQL Express before installing Ogama. When using Tobii tracking devices, you have to install apple bonjour also. On...SpaceFlight: SpaceFlight_v1.1: Added VCRedist.exe , run this first if you get the "MSVCP100.dll is missing" issueAdvanced Resource Tab for Blend: Advanced Resource Tab 2.0: Added filtering of (sub)-resource items and collapsing / expanding of all resource dictionaries.Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...New ProjectsAIDE (Automata-Identification Engine): AIDE is a automata-identification engine.CalligraphyMVVM: MVVM Calligraphy Windows Phone, Web ASP.NET MVCCentrify DirectControl PowerShell Module: The Centrify DirectControl PowerShell Module is based on Centrify API to give management control on Centrify data store into Active Directory.Cleveland Free Clinic: Cleveland Free Clinicfacebook???????????: facebook????????????????????Functional Reach: A Microsoft Kinect activity that using skeletal tracking to run a randomized stretching activity for patients that have prescribed home exercises for stroke.HR Project: This is a HR Project for Place company.OfflineBrowser: Offline browser for jw.org.ricerca-docs: Sphinx documentation for ricerca.Sample EventAgregator: Sample EventAgregator This is an example of using EventAgregator on WinRT / Windows 8 with the C # programming language. EventAgregator itself is part of PrismSMSGateWay: CMPP,SGIP,SMGP ????SP?? ??,????,?????,???. ??????,????,?????,????......?????,????? ????SPID ,MsgSrc,???,???IP,?????? ?????,?????,??,????vimrc file: vimrc file

  Read the article

• Ubuntu Slow - What architecture does the Windows Installer install?

  - by Benjamin Yep

  I feel absolutely limited by using Windows, and I need to switch to a Unix environment. I once installed Red Hat on my lappie (screen + external monitor setup; 4GB ram; x64; runs fast) and it worked fine, but I saw that the computer cluster that is the birthplace of my unix knowledge switched to Ubuntu, so naturally I follow. To the point. When I installed Ubuntu onto my machine via the Windows Installer, it ran quite slow. Opening Firefox takes about 8-9 seconds, it freezes up often, unable to handle its own background processes. I saw in a thread that, perhaps, it is running slow because the Windows Installer is installing an x64 version. Of course, my computer has had no performance issues in the past(except that time with the trojans but you know, know one is perfect ;) ) Anyways, I uninstalled Ubuntu, freeing up the max allocated memory it took up, and continue to be sad, trapped in my MS world with only a buggy Cygwin, any assistance is greatly appreciated! :) Thanks ~Ben

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop where with their software on and I also have my own where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also sometimes spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the High-CPU On-Demand Instances (medium) for 8 hours a day for a year costs me 580$, which is acceptable. I imagine that when I approach the workplace each day, I will make a single click my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you forsee?

  Read the article

• foreign-architecture

  - by speedy-MACHO

  Always when I install something, I get the following error multiple times: Unknown configuration key 'foreign-architecture' found in your 'dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with 'dpkg --add-architecture' invocations at the command line. When I try dpkg --add-architecture I get: Unknown configuration key `foreign-architecture' found in your `dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with `dpkg --add-architecture' invocations at the command line. dpkg: error: --add-architecture takes one argument Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! I've no problems yet, but since it says This warning will become a hard error at a later date I better do something about this. When I search 'foreign-architecture', I find an empty file, containing not a single byte. I somehow can't delete that file. Please help, it's a kind of creapy...

  Read the article

• NetBeans has broken interface with OpenJDK

  - by Krzysztof Stanislawek

  Sorry for English. Usually (say, at 4/5 of times), when I start NetBeans, interface is partially broken. For example, menu items are appearing and at once disappearing after click; some parts of editor are also blocked for cursor actions. Another issue is broken Options window - I can show it only once for NetBeans execution. There are more similar issues. $ java -version java version "1.7.0_55" OpenJDK Runtime Environment (IcedTea 2.4.7) (7u55-2.4.7-1ubuntu1~0.13.10.1) OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) Version of NetBeans is 7.0.1. Linux version is Mint 16. I use Mate. I had the same issue at other computer, at the same operating system. I know that installing Sun version of Java could help, but I also know that there shouldn't be such issue with OpenJDK. Also, I had other problem with NetBeans and Sun Java 8 - NetBeans suddenly crashed before he fully started, so I want to stick with OpenJDK. What causes my problem? Should I use other version of NetBeans/OpenJDK?

  Read the article

• 11.10 install hangs at different places

  - by TreefrogInc

  I've been trying to install Oneiric for some time now, and I've looked everywhere for a solution to the problems I've been having. So far, I've attempted four times to install it, so now I'm up to a point of panic. So I grabbed the 11.10 x64 iso from the website, and after verifying that the md5 hash is correct, I burned that onto my last remaining clean CD. On my first attempt, everything went perfectly up to the middle of the installation, and the progress bar stopped when it said: "configuring target system." I could do everything else, only the installation seemed to have stopped. After I googled my problem, I went and used the "check disc for errors" option, which said everything was fine. Then I tried the installation again, only this time, I selected "Install Ubuntu Now" instead of the "try before installing". Again, the same problem. My second and third tries didn't even reach the installation phase. It just stopped at the 5 blinking dots and never went any further. I used the same non-rewritable cd for all the attempts, as the error check didn't show any problems and because I'm currently out of usable cds. System: Core i3 CPU @ 3.4 GHz, 500 GB HDD (250g used for Win7, 70g used for preexisting system partitions, 180g unallocated).

  Read the article

• Ask the Readers: What Do You Have Set as Your Homepage?

  - by Mysticgeek

  When if comes to setting a homepage in your browser, it’s really based on personal preference. Today we want to know what you have set as your homepage in your favorite browser. Browser Homepage There are a lot of search sites that allow you to customize your homepage such as iGoogle, MSN, and Yahoo. Some people enjoy having a homepage set up as a dashboard of sorts. While others like simplicity and set it to Google or leave it blank. Not surprisingly in a small office or corporation you will see a lot of workstations set to MSN or the company SharePoint site. Unfortunately, a lot of free software tries to change you default homepage as well, like in this example when installing Windows Live Essentials. Make sure to avoid this by not rushing through software install wizards, and carefully opt out of such options. What is set as your homepage in your favorite web browser…both for work and at home? Leave us a comment and join in the discussion! Similar Articles Productive Geek Tips Ask the Readers: Which Web Browser Do You Use?How-To Geek Comment PolicyMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPSet the Default Browser on Ubuntu From the Command LineAnnouncing the How-To Geek Forums TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• Digital HD Transition

  - by Bill Evjen

  The HD Experience Roughly 53% of the viewing public has HD capable devices in their home 24% think they are watching HD while they have no subscription to any HD content Today’s HD Considerations Choices abound: format resolution – 720p, 1080i/p frame rates compression and wrapping audio compression and delivery metadata packaging, delivery, and usage content delivery protocols Metadata is going to be a part of the overall experience With emerging technologies: Super Hi-Vision (SHV, UHDTV 4320p), 3D HEVC/H.265, WEBM/VP8 HDBaseT, P2PTV Dolby Pulse/HE-AAC Industry standardization Metadata registration, packaging, and delivery standards Improved picture and sound quality is a logical next step but we need to also think about the end to end viewing experience including; 3D video and audio content Mixed-mode viewing to bring interactive and immersive experiences Content Transportability both on-to and off-of the aircraft High Definition Standardization Analog switch off around the world DTV transition completed: 17 countries DTV transition in progress: 45 countries The EU has mandated the end of 2012 as the final date for Analog Switch Off D-Cinema was standardized by SMPTE in 2006 Airlines are installing HD displays today Passengers are bringing their own devices now HD TV on airlines are getting bigger and bigger – bigger than SD was – now up to 23” Gray scale data input for color – 6 to 8 bit Contrast – 400 to 700 Backlit – LED Encryption – can it be the same for HD? PPV in the cabin?

  Read the article

• Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

  - by 5th Wheel

  The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

  Read the article

• Tell me why I should bother using Linux if it's all about problems getting the OS to install or work properly? [closed]

  - by Vilhjalmur Magnussin

  Why should I spend day's trying to get Ubuntu to either install and/or work properly? I'm using an Acer Timeline X laptop and if I install 10.04 the wireless doesn't work, and if I try installing 11.04 it either won't install, or if it installs it's full of bugs causing my computer to freeze all the time. So please, I'm all open ears. Someone give me one or two good reasons to continue wasting time (in hope it eventually works) before I decide to focus my time on other things like productivity (using Windows like I've been doing successfully the last 10 years). This is the second time I give Ubuntu a try, the first time was in 2010 using Ubuntu Studio and Ubuntu Desktop, and it ended with me shifting back to Windows since I had spent more time getting everything to work than actually working while trying Ubuntu. I really don't understand why it needs to be like this. Why go on trying when all I see is forums full of discussions about problems which people are having difficulties fixing. Or maybe there is just one special type of computer which works well with Linux? Would very much like to know which computer that is. SO please, if it's not to much trouble I really want to here from someone who has something good to say about going through all this trouble just to get a working environment up and running since I already have a working environment up and running called Windows. Thanks, Villi.

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >