Search Results

Search found 25400 results on 1016 pages for 'enable manual correct'.

Page 220/1016 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • Dell SC1435 always requires F1 at boot

    - by David Mackintosh
    I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

    Read the article

  • 2 pass encoding or not?

    - by marco.ragogna
    I would like to do a backup of some movies on DVD with File Factory. In the output setting, by default the option 2 pass encoding is disabled. Do I need to enable it for better quality and does it worth?

    Read the article

  • Domain names timing out after VPS IP change

    - by Fourjays
    I rent a CentOS 5 VPS from a UK-based provider, with DirectAdmin also installed. On Thursday night, they carried out planned maintenance to changed the two IPs I had been assigned to two new ones. On Friday, after the change had taken place, I updated my domain name records to reflect the IP change. Since then, all of the domains pointing to the VPS are timing out. Additionally, DirectAdmin was also not responding, but was was resolved by running the ipswap scripts as found in the DirectAdmin knowledgebase. It did not fix my domains though. I have contacted the VPS provider but I have been waiting for a response for some time now. I have checked again, and again, and all the IPs referenced in DirectAdmin are correct. If I go to the server IP in my browser it responds with "Apache is functioning normally." Email accounts on the server are also functioning correctly. But if I access a domain itself, it times out. Running a ping and a DNS look-up, I can confirm the nameserver IPs are correct. If I run a trace route it reaches an IP that is similar to my VPS IPs (last 2 blocks are different) before timing out (it never shows my server IP). I am relatively new to VPS management so don't have a vast wealth of experience with troubleshooting problems on them. I have checked all of the httpd configuration files, which don't seem to have any IP references in them at all. Looking in the Apache error logs, what errors there are do not coincide with times I have tried to access the site. Is this issue at my provider's end? Is there anything else I can check or test, to rule out post-IP-change problems with my server configuration? It was all running fine prior to the IP change.

    Read the article

  • Printing images with same orientation in Windows 7

    - by Notinlist
    I have generated many graphs (GraphViz .dot, about 35 pcs) from a grammar and then I generated .png files from it. All of them are small graphs with a few (2 to 5) nodes on it. I would like to print them, 9 or 12 per page. The problem is that Windows 7 Print Pictures guesses orientation for every image on the grid individually. How can I force Windows 7 Print Pictures to use the same orientation for all pictures (use the files as-is, just do the fitting) What alternative solution can I use for my task which does not include repetitive manual labor? (OS: Windows 7 64 bit, regularly updated.) Thanks in advance!

    Read the article

  • Author Tools for Classroom Material?

    - by user1413
    I'm interested in putting a whole bunch of classroom material online. This material ranges from accounting classes to yoga. I would like to find a simple to use authoring tool that the people who teach the classes can use to put the material online. In other words, I do not want a tool that requires a developer. A person who knows the subject matter and is willing to read the manual should be able to put their material online. At minimum, this tool should allow for text and multi-media to be chained together in a logical form and it should allow quizzes to be created and graded. Even better would be for the tool to have some "smarts" so that subject areas which the student does not understand can be drilled. Even better would be for the tool to have ecommerce built in so that the instructors can charge for the classes. Are there any such tools?

    Read the article

  • Looking for an application to record audio and video on a linux "embedded" device

    - by Luke404
    I am working with a linux x86 device with limited CPU resources (as a prototype we just use a pentium-m netbook). We'd like to record video from one V4L2 device (we'll probably end up using just USB Video Class devices like all modern webcams) and one audio stream from an ALSA source. The thing will not have screen and keyboard, and obviously no X11 environment. Goals are: do as little work as possible to cope with little cpu resources - for example I'd like to record video in the native MJPEG I get out of the UVC devices encoding audio to MPEG3 Layer-2 (aka mp2) is ok since it let us save a lot of space (compared to raw pcm samples) and does use little cpu power I don't mind loosing some video frames here and there (UVC devices do that) as long as I can get audio and video streams syncronized not require user input to start the thing (a python script takes care of initialization, startup, shutdown, etc...) be able to open the resulting files for postprocessing without too much effort (ie, if mplayer or vlc can play it, it's fine) So far the only app I found that could be started from command line and record V4L2 video + ALSA audio is mencoder but I'm having some difficulties with it. It should be able to do that but I cannot record audio and video together - just one of the two. And if I use two different processes to record to two different files I have no means to get them in sync (audio is more or less always correct, but video framerate will vary over time and it seems to lack timestamps to correctly play it back to the correct time). Long story short, how do you record an unconverted MJPEG stream (from an UVC device) and an audio stream (from an ALSA device, possibly encoding to any standard format) using a command line tool, to a single file (MPEG or any other container), keeping audio and video in sync?

    Read the article

  • Powershell Scripts to modify settings on Gpedit.msc console

    - by Kodeesh
    Can any one of you please explain what is the exact powershell cmdlet for changing settings (Enabled or Disabled) in Gpedit.msc console...? I need a exact query to link (Computer Configuration--Administrative Templates--System--User Profiles-- Do not forcefully unload the users registry at user logoff--'Enabled') in PowerShell. Which means whenever we excutes the function it should Enable the mentioned setting from gpedit.msc console...

    Read the article

  • KVM Guest not reachable from host

    - by Paul
    Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

    Read the article

  • Why would one of my servers stop being able to access other servers by FQDN?

    - by Newlyn Erratt
    I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

    Read the article

  • IE advanced settings

    - by arwinder
    Working on a Domain network, I am having admin access over the machine , but recently found out(was in bad need for debugging), that I am not able to change the Advanced settings for the IE. Basically I need to enable the JS debugging so as to catch the grumpy JS issues. Looked out in the Group Policies but couldnt find anything substantial.

    Read the article

  • Cannot find FIS partition 'initramfs'......... need help!!!

    - by vikramtheone
    Hi Guys, I have a Ubuntu 9.04 Linux running on Freescale's i.MX515(ARM Cortex based) board with me. There were about 250 updates pending and I did that today, well some of the updates failed because of the infamous errors: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: Couldn't rebuild package cache E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. So, when I do the 'sudo dpkg --configure -a' I get new errors related to FIS partition: Cannot find FIS partition 'initramfs' User postinst hook script [/usr/sbin/flash-kernel] exited with value 1 dpkg: error processing linux-image-2.6.28-18-imx51 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of linux-image-imx51: linux-image-imx51 depends on linux-image-2.6.28-18-imx51; however: Package linux-image-2.6.28-18-imx51 is not configured yet. dpkg: error processing linux-image-imx51 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-imx51: linux-imx51 depends on linux-image-imx51 (= 2.6.28.18.23); however: Package linux-image-imx51 is not configured yet. dpkg: error processing linux-imx51 (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.28-18-imx51 Cannot find FIS partition 'initramfs' dpkg: subprocess post-installation script returned error exit status 1 Whats going wrong here, need help!!! I'm a newbie. Regards Vikram

    Read the article

  • Grep the whole body of a function

    - by dotancohen
    Supposing I know that someFile.php contains the definition for someFunction(). How would I go about displaying the whole body of the function in stdout? If I know that the body is 10 lines long then I would use cat someFile.php | grep -A 10 "function someFunction" [1] but in reality the function could be any arbitrary length. I figured that with sed I could use Vimesque commands such as /function someFunction<Return>/{<Return>% [2] but I can't figure out exactly how to format it. Ideally, the PHPDoc before the function would be output along with the function. Any help or links to the appropriate fine manual would be appreciated. Thanks! [1] I know that the cat is redundant, but I find this format easier to read. [2] Find the function definition, go to the opening brace, go to the close brace

    Read the article

  • How to export a brochure into PDF with each layout as a page?

    - by nhj
    I have created a 3-fold brochure in Mac iWork - Pages. If I print the brochure then I can 3-fold it and everything is fine. But if I want to export as PDF then I get a 2-A4 size pages, and this distorts the user the order of the pages, I would like to export each layout as a separate page. The 'Layout Break' option is diabled and I don't know how to enable it? Any ideas? Thanks.

    Read the article

  • enabling php in apache

    - by user343282
    I have installed apache 2.2 and php 5.3. when I run a simple php code like <?php phpinfo();?> instead of the simple php information page the code shows up on the screen. My php it seems is not running. How I can enable it and makes it to run with apache. btw. I am newbee thanks

    Read the article

  • Windows 8 N & Media Player/DVD playback

    - by HaydnWVN
    An open-ended question (ie I havn't encountered this yet...) Being in the UK I consider it only a matter of time until I come across the following scenario: Windows 8 Pro N install where the End User wants DVD playback without installing all the Media Player 'add-ins' to enable it. Will just installing codecs and then some playback software work? (ie no huge downloads from Windows Update - consider this user to only want Crtical Updates due to a slow internet connection.)

    Read the article

  • Suppress log messages about 3ware disk temperature changes on CentOS?

    - by Stefan Lasiewski
    I have a number of CentOS 5 servers which use 3ware RAID controllers. These servers are bugging my team with messages about minor temperature changes, like this: Jun 8 12:32:39 HOST smartd[1231]: Device: /dev/twa0 [3ware_disk_01], SMART Usage Attribute: 194 Temperature_Celsius changed from 119 to 118 Jun 8 12:32:39 HOST smartd[1231]: Device: /dev/twa0 [3ware_disk_03], SMART Usage Attribute: 194 Temperature_Celsius changed from 122 to 121 How can I suppress these messages? According to man smartd.conf : To disable any of the 3 reports, set the corresponding limit to 0. Trailing zero arguments may be omitted. By default, all temperature reports are disabled (´-W 0´). On my systems, smartd is reporting about temperature changes by default. I tried a manual approach. In /etc/smartd.conf, I have the following: /dev/twa0 -d 3ware,1 -a -W 0 /dev/twa0 -d 3ware,3 -a -W 0 But this still does not suppress the messages. Since these messages show up in /var/log/messages, LogWatch is sending unnecessary emails every night.

    Read the article

  • Out of memory error when enabling openX Market plugin

    - by Jeremy Pippin
    We're trying to enable the openX Market plugin on openX 2.8.9. Enabling the plugin results in an "Allowed memory exceeded" error: Fatal error: Allowed memory size of 201326592 bytes exhausted (tried to allocate 76 bytes) in /home/openx/lib/pear/PEAR.php on line 868 no matter what we have our php memory_limit set to. It even exceeded 512MB. We're running RHEL 5.6 and PEAR 1.9.4 Has anybody else come across this problem?

    Read the article

  • How to diagnose Internal Server error on Lighttpd?

    - by Tomaszs
    I have Lighttpd on Centos 5 with Fcgi and Memcached. Periodically, once per week or two i get internal server error 500 and i must manually restart lighttpd to get it to work again. In my lighttpd config I've defined error log file: server.errorlog = "/home/lxadmin/httpd/lighttpd/error.log" But when I open it, it has no rows for last days, only one month ago. So my question is how to diagnose what is the issue and how to enable error log for my configuration?

    Read the article

  • Windows 7 - want full named admin account

    - by soupagain
    I want a full named admin account on Windows 7. The default local administrators group is a limited account. You can enable the hidden full administrator account, but I can't see how to rename it. How can I get a full admin account on Windows 7 in my name. (Yes, I know there are reasons not to do this, but that's not my question ;)

    Read the article

  • How can Nagios handle non-threshold based plugins?

    - by FliesLikeABrick
    I am writing a Nagios plugin to monitor trends of a certain storage resource utilization (e.g. gradual increases are fine, but an instantaneous/sudden increase or decrease in resource usage may indicate a problem). For what it's worth, it is reviewing the last N entries in an RRD file generated by a custom cacti data source/templates. What is the "right" way to handle Nagios notification config/implementation for this? The problem is that it the plugin would exit as warning/critical for one polling period, but in the next it would be fine (or 3 polling periods later, if I look at 3 polling periods worth of data). I guess the question is: should I just write it in such a way that it will alert for X polling periods, or should I find a way to write it such that manual intervention is required for it to clear (such as logging into the monitoring server or hitting a URL to run a script that submits a passive result)? Your input is appreciated, and if you have any tips for how to implement the latter I'm open to them (I can think of a few ways to possibly implement it)

    Read the article

  • nagios wrongly reports packet loss

    - by Alien Life Form
    Lately, on my nagios 3.2.3 install (CentOS5, monitoring ~ 300 hosts, 1150 services) has sdtarted to occasionally report high packet loss on 50-60 hosts at a time. Problem is it's bogus. Manual runs of ping (or its own check_ping binary) finds no fault with any of the affected hosts. The only possible cures I found so far are: run all the checks manually (they will succeed but it may act up again on next check) acknowledge and wait for the problem to go away (may take several ours) I suspect (but have no particular reason other than single rescheduled checks succeeding) that the problem may lay with all the checks being mass scheduled together - in which case introducing some jitter in the scheduling (how?) might help. Or it may be something completely different. Ideas, anyone?

    Read the article

  • What do I need to use Smart card for windows login (no domain, just regular single local machine)

    - by Muhammad Nour
    I have a reader from ACS "ACR83" and a brand new card from the same place ACO3-32 as a development kit and I need to use both of them to login into my laptop locally I am not a part of domain, I am using Windows xp SP3 what should I do to enable smart card login do I need third party software to do this without domain or should it be a domain environment to be able to do such a thing this is the first time dealing with smart card, so I hope some one will help me Doing this

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >