Search Results

Search found 5906 results on 237 pages for 'opn specialization guide'.

Page 220/237 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • GCM: onMessage() from GCMIntentService is never called [migrated]

    - by Shrikant
    I am implementing GCM (Google Cloud Messaging- PUSH Notifications) in my application. I have followed all the steps given in GCM tutorial from developer.android.com My application's build target is pointing to Goolge API 8 (Android 2.2 version). I am able to get the register ID from GCM successfully, and I am passing this ID to my application server. So the registration step is performed successfully. Now when my application server sends a PUSH message to my device, the server gets the message as SUCCESS=1 FAILURE=0, etc., i.e. Server is sending message successfully, but my device never receives the message. After searching alot about this, I came to know that GCM pushes messages on port number 5228, 5229 or 5230. Initially, my device and laptop was restricted for some websites, but then I was granted all the permissions to access all websites, so I guess these port numbers are open for my device. So my question is: I never receive any PUSH message from GCM. My onMessage() from GCMIntenService class is never called. What could be the reason? Please see my following code and guide me accordingly: I have declared following in my manifest: <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="8" /> <permission android:name="package.permission.C2D_MESSAGE" android:protectionLevel="signature" /> <!-- App receives GCM messages. --> <uses-permission android:name="com.google.android.c2dm.permission.RECEIVE" /> <!-- GCM connects to Google Services. --> <uses-permission android:name="android.permission.INTERNET" /> <!-- GCM requires a Google account. --> <uses-permission android:name="android.permission.GET_ACCOUNTS" /> <!-- Keeps the processor from sleeping when a message is received. --> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-permission android:name="package.permission.C2D_MESSAGE" /> <uses-permission android:name="android.permission.INTERNET" /> <receiver android:name="com.google.android.gcm.GCMBroadcastReceiver" android:permission="com.google.android.c2dm.permission.SEND" > <intent-filter> <action android:name="com.google.android.c2dm.intent.RECEIVE" /> <action android:name="com.google.android.c2dm.intent.REGISTRATION" /> <category android:name="packageName" /> </intent-filter> </receiver> <receiver android:name=".ReceiveBroadcast" android:exported="false" > <intent-filter> <action android:name="GCM_RECEIVED_ACTION" /> </intent-filter> </receiver> <service android:name=".GCMIntentService" /> /** * @author Shrikant. * */ public class GCMIntentService extends GCMBaseIntentService { /** * The Sender ID used for GCM. */ public static final String SENDER_ID = "myProjectID"; /** * This field is used to call Web-Service for GCM. */ SendUserCredentialsGCM sendUserCredentialsGCM = null; public GCMIntentService() { super(SENDER_ID); sendUserCredentialsGCM = new SendUserCredentialsGCM(); } @Override protected void onRegistered(Context arg0, String registrationId) { Log.i(TAG, "Device registered: regId = " + registrationId); sendUserCredentialsGCM.sendRegistrationID(registrationId); } @Override protected void onUnregistered(Context context, String arg1) { Log.i(TAG, "unregistered = " + arg1); sendUserCredentialsGCM .unregisterFromGCM(LoginActivity.API_OR_BROWSER_KEY); } @Override protected void onMessage(Context context, Intent intent) { Log.e("GCM MESSAGE", "Message Recieved!!!"); String message = intent.getStringExtra("message"); if (message == null) { Log.e("NULL MESSAGE", "Message Not Recieved!!!"); } else { Log.i(TAG, "new message= " + message); sendGCMIntent(context, message); } } private void sendGCMIntent(Context context, String message) { Intent broadcastIntent = new Intent(); broadcastIntent.setAction("GCM_RECEIVED_ACTION"); broadcastIntent.putExtra("gcm", message); context.sendBroadcast(broadcastIntent); } @Override protected void onError(Context context, String errorId) { Log.e(TAG, "Received error: " + errorId); Toast.makeText(context, "PUSH Notification failed.", Toast.LENGTH_LONG) .show(); } @Override protected boolean onRecoverableError(Context context, String errorId) { return super.onRecoverableError(context, errorId); } }

    Read the article

  • Postfix - am I sending spam?

    - by olrehm
    today I received like 30 messages within 5 minutes telling me that some mail I send could not be delivered, mostly to *.ru email addresses which I did not send any mail to. I have my own webserver (postfix/dovecot) set up using this guide (http://workaround.org/ispmail/lenny) but adjusted a little bit for Ubuntu. I tested whether I am an Open Relay which I am apparently not. Now there are two possible reasons for the above mentioned emails: Either I am sending out spam, or somebody wants me to think that, correct? How can I check this? I selected one particular address that I supposedly send spam to. Then I searched my mail.log for this entry. I found two blocks that record that somebody from the server connected to my server and delivered some message to two different users. I cannot find an entry reporting that anyone from my server send an email to that server. Does this mean its just some mail to scare me or could it still have been send by me in the first place? Here is one such block from the log (I replaced some confidential stuff): Jun 26 23:23:28 mycustomernumber postfix/smtpd[29970]: connect from mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber postfix/smtpd[29970]: 044991528995: client=mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber postfix/cleanup[29974]: 044991528995: message-id=<[email protected]> Jun 26 23:23:29 mycustomernumber postfix/qmgr[3369]: 044991528995: from=<>, size=2198, nrcpt=1 (queue active) Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) ESMTP::10024 /var/lib/amavis/tmp/amavis-20110626T223137-28598: <> -> <[email protected]> SIZE=2198 Received: from mycustomernumber.stratoserver.net ([127.0.0.1]) by localhost (rehmsen.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP for <[email protected]>; Sun, 26 Jun 2011 23:23:29 +0200 (CEST) Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) Checking: YakjkrdFq6A8 [195.144.251.97] <> -> <[email protected]> Jun 26 23:23:29 mycustomernumber postfix/smtpd[29970]: disconnect from mx.webstyle.ru[195.144.251.97] Jun 26 23:23:29 mycustomernumber amavis[28598]: (28598-11) lookup_sql_field(id) (WARN: no such field in the SQL table), "[email protected]" result=undef Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: connect from localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: 0A1FA1528A21: client=localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber postfix/cleanup[29974]: 0A1FA1528A21: message-id=<[email protected]> Jun 26 23:23:32 mycustomernumber postfix/qmgr[3369]: 0A1FA1528A21: from=<>, size=2841, nrcpt=1 (queue active) Jun 26 23:23:32 mycustomernumber postfix/smtpd[29979]: disconnect from localhost.localdomain[127.0.0.1] Jun 26 23:23:32 mycustomernumber amavis[28598]: (28598-11) FWD via SMTP: <> -> <[email protected]>,BODY=7BIT 250 2.0.0 Ok, id=28598-11, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 0A1FA1528A21 Jun 26 23:23:32 mycustomernumber amavis[28598]: (28598-11) Passed CLEAN, [195.144.251.97] [195.144.251.97] <> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: YakjkrdFq6A8, Hits: 2.249, size: 2197, queued_as: 0A1FA1528A21, 2882 ms Jun 26 23:23:32 mycustomernumber postfix/smtp[29975]: 044991528995: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.3, delays=0.39/0.01/0.01/2.9, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=28598-11, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 0A1FA1528A21) Jun 26 23:23:32 mycustomernumber postfix/qmgr[3369]: 044991528995: removed Jun 26 23:23:33 mycustomernumber postfix/smtp[29980]: 0A1FA1528A21: to=<[email protected]>, orig_to=<[email protected]>, relay=mx3.hotmail.com[65.54.188.110]:25, delay=1.2, delays=0.15/0.02/0.51/0.55, dsn=2.0.0, status=sent (250 <[email protected]> Queued mail for delivery) Jun 26 23:23:33 mycustomernumber postfix/qmgr[3369]: 0A1FA1528A21: removed Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max connection rate 1/60s for (smtp:195.144.251.97) at Jun 26 23:23:28 Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max connection count 1 for (smtp:195.144.251.97) at Jun 26 23:23:28 Jun 26 23:26:49 mycustomernumber postfix/anvil[29972]: statistics: max cache size 1 at Jun 26 23:23:28 I can provide more info if you tell me what you need to know. Thank you for you help!

    Read the article

  • Nginx + Nagios : 502 Bad gateway

    - by MrROY
    I have a fully new install nagios, but I can't access to it. Here's my Nginx config: server{ listen 80; server_name 61.148.45.10; # blahblah # Nagios Monitoring location /nagios3/ { proxy_pass http://127.0.0.1:80; } } Nagios is installed step by step(From this Linode guide): sudo apt-get install -y nagios3 Then I try to visit http://ip-address/nagios3/, but it shows 502 bad gateway. How do I deal with this ? This is my /var/log/syslog: Oct 25 14:18:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;1;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:19:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;1;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:19:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;2;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:20:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;2;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:20:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;3;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;3;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:21:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;HARD;4;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server nagios3: SERVICE NOTIFICATION: root;localhost;Disk Space;WARNING;notify-service-by-email;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server postfix/pickup[24474]: 4F89F394034C: uid=109 from=<nagios> Oct 25 14:21:17 my-server postfix/cleanup[27756]: 4F89F394034C: message-id=<20131025062117.4F89F394034C@my-server> Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: from=<nagios@[email protected]>, size=594, nrcpt=1 (queue active) Oct 25 14:21:17 my-server postfix/local[27758]: 4F89F394034C: to=<root@localhost>, relay=local, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: removed Oct 25 14:22:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;HARD;4;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server nagios3: SERVICE NOTIFICATION: root;localhost;HTTP;WARNING;notify-service-by-email;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server postfix/pickup[24474]: 219CA3940381: uid=109 from=<nagios> Oct 25 14:22:07 my-server postfix/cleanup[27756]: 219CA3940381: message-id=<20131025062207.219CA3940381@my-server> Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: from=<nagios@[email protected]>, size=605, nrcpt=1 (queue active) Oct 25 14:22:07 my-server postfix/local[27758]: 219CA3940381: to=<root@localhost>, relay=local, delay=0.12, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: removed Oct 25 14:39:01 my-server CRON[28242]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) And there're lot of 127.0.0.1 visit in nginx log, but I actually visit from a external ip: 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36"

    Read the article

  • SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

    - by Carlos Paulino
    I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

    Read the article

  • Slow login to load-balanced Terminal Server 2008 behind Gateway Server

    - by Frans
    I have a small load-balanced (using Session Broker) Terminal Server 2008 farm behind a Gateway Server which is accessed from the Internet. The problem I have is that there is a delay of 20-30 seconds if the session broker switches the user to another server during login. I think this is related to the fact that I am forcing the security layer to be RDP rather than SSL. The background The Gateway server has a public routeable IP addres and DNS name so it can be accessed from the Internet and all users come in via this route (the system is used to provide access to hosted applications to external customers). The actual terminal servers only have internal IP addresses. This works really well, except that with a Vista or Windows 7 client, the Remote Desktop client will negotiate with the server to use SSL for the security layer. This then exposes the auto-generated certificate that TS1 or TS2 has - but since they are internal, auto-generated certificates, the client will get a stern warning that the certificate is not valid. I can't give the servers a properly authorised certificate as the servers do not have public routeable IP address or DNS name. Instead, I am using Group Policy to force the connections to be over RDP instead of SSL. \Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Security\Require use of specific security layer for remote (RDP) connections The Windows 7 user now gets a much less stern warning that "the server's identity cannot be confirmed" which I can live with. I don't have enough control over the end-user's machines to ask them to install a new root certificate either. TS1 and TS2 are also load-balanced using the Session Broker, which is installed on the Gateway Server. I am using round-robin DNS, so the user's initial connection will go via Gateway1 to either TS1 or TS2. TS1/TS2 will then talk to the session broker and may pass the user to the other server. I.e. the user may get connected to TS2, but after talking to the session broker the user may be passed to TS1, which is where they will run their session. When this switching of servers happens, in my setup, the screen sits with the word "Welcome" for 20-30 seconds after which it flickers, Welcome is shown again and then flashing through nthe normal login screens (i.e. "wait for user profile manager" etc). Having done some research, I think what is happening is that the user is being fully logged on to TS2 (while "Welcome" is shown) before being passed to TS1, where they are then logged in again. It is interesting that normally when you see the ""Welcome" word, the little circle to left rotates. However, it does not rotate during this delay - the screen just looks frozen. This blog post leads me to think that this is because CredSSP is not being used, probably because I am disallowing SSL and forcing RDP. What I have tried I enabled SSL again which removes the "Welcome" delay. However, it seems to introduc a new delay much earlier in the process. Specifically, when the RDP client is saying "initialising connection" - this is now much slower. Quite apart from the fact that my certificate problem precludes me using that solution without considerable difficulty. I tried disabling the load balancing (just remove the servers from the session broker farm) and the connections do not have any delay. The problem is also intermittent in the sense that it only happens when the user gets bumped from one server to another. I tested this by trying to connect directly to TS1 (via the Gateway, of course) and then checking which server I actually got connected to. Just to be sure, I also by-passed the round-robin DNS to see if it had any impact and it doesn't. The setup is essentially in line with MS recommendations here: TS Session Broker Load Balancing Step-by-Step Guide I tried changing to using a dedicated redirector. Basically, rather than using a round-robin DNS, I pointed my DNS to the Gateway server and configured it to be a dedicated redirector (disallow logons, add it to the farm). Same problem, alas. Any ideas or suggestions gratefully received.

    Read the article

  • how to install ffmpeg in cpanel

    - by Ajay Chthri
    i'm using dedicated server(linux) so i need to install ffmpeg in cpanel so here ffmpeg i found in Main Software Install a Perl Module but i writing script in php so how can i install ffmpeg phpperl when i'am trying to install ffmpeg in perl module i get this response Checking C compiler....C compiler (/usr/bin/cc) OK (cached Tue Jan 17 19:16:31 2012)....Done CPAN fallback is disabled since /var/cpanel/conserve_memory exists, and cpanm is available. Method: Using Perl Expect, Installer: cpanm You have make /usr/bin/make Falling back to HTTP::Tiny 0.009 You have /bin/tar: tar (GNU tar) 1.15.1 You have /usr/bin/unzip You have Cpanel::HttpRequest 2.1 Testing connection speed...(using fast method)...Done Ping:2 (ticks) Testing connection speed to cpan.knowledgematters.net using pureperl...(28800.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.develooper.com using pureperl...(22233.33 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.schatt.com using pureperl...(32750.00 bytes/s)...Done Ping:3 (ticks) Testing connection speed to cpan.mirror.facebook.net using pureperl...(14050.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.mirrors.hoobly.com using pureperl...(5150.00 bytes/s)...Done Five usable mirrors located Ping:0 (ticks) Testing connection speed to 208.109.109.239 using pureperl...(28950.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to 208.82.118.100 using pureperl...(19300.00 bytes/s)...Done Ping:1 (ticks) Testing connection speed to 69.50.192.73 using pureperl...(19300.00 bytes/s)...Done Three usable fallback mirrors located Mirror Check passed for cpan.schatt.com (/index.html) Searching on cpanmetadb ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:0).......(request attempt 1/12)...Using dns cache file /root/.HttpRequest/cpanmetadb.cpanel.net......searching for mirrors (mirror search attempt 1/3)......5 usable mirrors located. (less then expected)......mirror search success......connecting to 208.74.123.82...@208.74.123.82......connected......receiving...100%......request success......Done Searching Video::FFmpeg on cpanmetadb (http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release) ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:1).......(request attempt 1/12)[email protected]%......request success......Done Source: fastest CPAN mirror ... --> Working on Video::FFmpeg Fetching http://cpan.schatt.com//authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz ... Fetching http://cpan.schatt.com/authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz (connected:1).......(request attempt 1/12)...Resolving cpan.schatt.com...(resolve attempt 1/65)......connecting to 66.249.128.125...@66.249.128.125......connected......receiving...25%...50%...75%...100%......request success......Done OK Unpacking Video-FFmpeg-0.47.tar.gz Video-FFmpeg-0.47/ Video-FFmpeg-0.47/Changes Video-FFmpeg-0.47/FFmpeg.xs Video-FFmpeg-0.47/MANIFEST Video-FFmpeg-0.47/META.yml Video-FFmpeg-0.47/Makefile.PL Video-FFmpeg-0.47/README Video-FFmpeg-0.47/lib/ Video-FFmpeg-0.47/lib/Video/ Video-FFmpeg-0.47/lib/Video/FFmpeg/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVFormat.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Audio.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Subtitle.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Video.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream.pm Video-FFmpeg-0.47/lib/Video/FFmpeg.pm Video-FFmpeg-0.47/ppport.h Video-FFmpeg-0.47/t/ Video-FFmpeg-0.47/t/Video-FFmpeg.t Video-FFmpeg-0.47/test Video-FFmpeg-0.47/test.mp4 Video-FFmpeg-0.47/typemap Entering Video-FFmpeg-0.47 Checking configure dependencies from META.yml META.yml not found or unparsable. Fetching META.yml from search.cpan.org Fetching http://search.cpan.org/meta/Video-FFmpeg-0.47/META.yml (connected:1).......(request attempt 1/12)...Resolving search.cpan.org...(resolve attempt 1/65)......connecting to 199.15.176.161...@199.15.176.161......connected......receiving...100%......request success......Done Configuring Video-FFmpeg-0.47 ... Running Makefile.PL Perl v5.10.0 required--this is only v5.8.8, stopped at Makefile.PL line 1. BEGIN failed--compilation aborted at Makefile.PL line 1. N/A ! Configure failed for Video-FFmpeg-0.47. See /home/.cpanm/build.log for details. Perl Expect failed with non-zero exit status: 256 All available perl module install methods have failed guide me how can i install ffmpeg in cPanel Thanks for advance.

    Read the article

  • Apache outputs all urls of a second domain as a subfolder of the primary domain name

    - by s_rathbone
    Hi all, would anyone be able to possibly give me some guidance.. Basically, i have a 'shared hosting' account with a large internet hosting provider, and my account lets me have multiple seperate domains within this folder structure.(note: not aliased domains and not sub domains). so, my goal is to have 2 domains set up. i have already purchased the two domain names i need: The first domain is the 'primary' domain name for the root folder(eg. www.example1.com) and the second domain name is set for one of its sub folders(eg. www.example2.com is set to the folder www.example1.com/sites/music). The problem is that when apache returns a page of the second domain back to the browser, apache writes the hyperlinks as if it's a sub folder of the first domain ( eg. www.example2.com/index.html. comes out as http://www.example1.com/sites/music/index.html). Now, I have done some reading on this, looking though "Apache: the definitive guide"(o'reilly), and although it was useful, couldn't really find the answer. i'm guessing this issue is most likely an apache setup issue in http.conf, rather than an issue with the hosting company itself (which is why im posting it here) and I have also been to the official documentation for apache site, and i am guessing i might need to use something like the rewritebase directive in htaccess files.. but im really not sure, im more of a java programmer guy, and have been struggling with this for a couple of days. Any guidance would be REALLY appreciated. If it helps, my hosting company is godaddy, and my sites are hosted on linux. My problem was originally with wordpress which i reinstalled a number of times in various ways to correct the problem, but ive just done a test with a very simple static html, and it still has the same issue with relative urls like this: <html> <head></head><body><a href="images/dog.html">Pictures of Dogs</a></body> </html> However, it is fine if i hardcode the urls like this: <html> <head></head><body><a href="http://www.example2.com/images/dog.html">Pictures of Dogs</a></body> </html> Thanks heaps, Steve R NOW FIXED Ok, the problem has now been fixed, and i didn't need to modify any .conf or .htaccess files. The problem was, that when I went to install the second application into a second domain from the godaddy site, one of the setup questions is that it asks you which site you want it installed to. after that it asks for the desired folder path. However, the problem was that the second domain name was already pointing to the correct subfolder of the primary domain. So when I started installing wordpress again and came to the menu to select which site it was for, and it listed only the primary domain as an option, i assumed that this was like a label of "which hosting account?", or "which primary domain will your application will be installed under?" because I already knew that in the next step i was specifiying the folder. In order to correct this, you must make sure that your second domain is added to your domain list so that it will be listed as an option during the installation process. For further details please read tystips.com/archives/52/how2-save-money-host-multiple-wordpress-blogs-on-a-single-godaddy-hosting-account/

    Read the article

  • Postfix - Gmail - Mountain Lion // can't send mail

    - by miako
    I have read most of the tutorials found on google but still can't make it work. I run the command : date | mail -s "Test" [email protected] . The log is this : Oct 22 11:38:00 XXX.local postfix/master[288]: daemon started -- version 2.9.2, configuration /etc/postfix Oct 22 11:38:00 XXX.local postfix/pickup[289]: 9D85418A031: uid=501 from=<me> Oct 22 11:38:00 XXX.local postfix/cleanup[291]: 9D85418A031: message-id=<[email protected]> Oct 22 11:38:00 XXX.local postfix/qmgr[290]: 9D85418A031: from=<[email protected]>, size=327, nrcpt=1 (queue active) Oct 22 11:38:00 XXX.local postfix/smtp[293]: initializing the client-side TLS engine Oct 22 11:38:02 XXX.local postfix/smtp[293]: setting up TLS connection to smtp.gmail.com[173.194.70.109]:587 Oct 22 11:38:02 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: TLS cipher list "ALL:!EXPORT:!LOW:+RC4:@STRENGTH:!eNULL" Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:before/connect initialization Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:SSLv2/v3 write client hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=2 verify=0 subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Oct 22 11:38:03 --- last message repeated 1 time --- Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=1 verify=1 subject=/C=US/O=Google Inc/CN=Google Internet Authority G2 Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=0 verify=1 subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server certificate A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server done A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write client key exchange A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write change cipher spec A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 flush data Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server session ticket A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: subject_CN=smtp.gmail.com, issuer_CN=Google Internet Authority G2, fingerprint E4:CA:10:85:C3:53:00:E6:A1:D2:AC:C4:35:E4:A2:10, pkey_fingerprint=D6:06:2E:15:AF:DF:E9:50:A5:B4:E2:E4:C5:2E:F9:BA Oct 22 11:38:03 XXX.local postfix/smtp[293]: Untrusted TLS connection established to smtp.gmail.com[173.194.70.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 22 11:38:03 XXX.local postfix/smtp[293]: 9D85418A031: to=<[email protected]>, relay=smtp.gmail.com[173.194.70.109]:587, delay=3.4, delays=0.26/0.13/2.8/0.26, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 s3sm54097220eeo.3 - gsmtp (in reply to MAIL FROM command)) Oct 22 11:38:04 XXX.local postfix/cleanup[291]: D4D2F18A03C: message-id=<[email protected]> Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: from=<>, size=2382, nrcpt=1 (queue active) Oct 22 11:38:04 XXX.local postfix/bounce[297]: 9D85418A031: sender non-delivery notification: D4D2F18A03C Oct 22 11:38:04 XXX.local postfix/qmgr[290]: 9D85418A031: removed Oct 22 11:38:04 XXX.local postfix/local[298]: D4D2F18A03C: to=<[email protected]>, relay=local, delay=0.11, delays=0/0.08/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox) Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: removed Oct 22 11:39:00 XXX.local postfix/master[288]: master exit time has arrived I am really confused as i have never setup MTA again an i need it for local web development. I don't use XAMPP. I use the built in Servers. Can anyone guide me?

    Read the article

  • Building nginx 1.0.4 on Amazon EC2 micro - perl and python problems

    - by digitaltoast
    I'd like to run nginx as a reverse proxy with apache2 on my EC2 micro instance. yum install nginx gives me nginx-0.8.53-1.2.amzn1.x86_64.rpm The current nginx is 1.0.4 I found and followed this guide: http://kdn2.info/2011/05/install-nginx-on-amazon-ec2/ It works fine up to and including "make". When I get to checkinstall --fstrans=no I get ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ERROR: ld.so: object '/usr/lib/installwatch.so' from LD_PRELOAD cannot be preloaded: ignored. make[1]: Leaving directory `/root/src/nginx-1.0.4' ======================== Installation successful ========================== Copying documentation directory... ./ ./CHANGES ./LICENSE ./README cp: cannot stat `//var/tmp/gRWoVgIcdbmjfTjoVGBM/newfiles.tmp': No such file or directory Copying files to the temporary directory...OK Striping ELF binaries and libraries...OK Compressing man pages...OK Building file list...OK Building RPM package... FAILED! *** Failed to build the package ...and the logfile is full of: Building target platforms: x86_64 Building for target x86_64 Processing files: nginx-1.0.4-1.x86_64 error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr error: File not found: /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/usr/doc There IS /usr/src/rpm/BUILDROOT/nginx-1.0.4-1.x86_64/ but no /usr Following further down the page, it says: "If we want to use, for example, PHP 5.2 we can download PHP and Nginx compatible with Amazon Kernel(Xen Kernel) from the CentosALT Repository." So I install the two repositories, but when I yum install http://centos.alt.ru/pub/nginx/1.0/RPMS/x86_64/nginx-stable-1.0.4-1.el5.x86_64.rpm I get Error: Package: nginx-stable-1.0.4-1.el5.x86_64 (/nginx-stable-1.0.4-1.el5.x86_64) Requires: perl(:MODULE_COMPAT_5.8.8) You could try using --skip-broken to work around the problem but that doesn't fix it. When I do yum update, I get --> Finished Dependency Resolution Error: Package: python-distribute-0.6.19-10.1.x86_64 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 Error: Package: python-distribute-0.6.19-10.1.i586 (devel_languages_python) Requires: python < 2.5 Installed: 1:python-2.6-1.19.amzn1.noarch (@amzn-main) python = 1:2.6-1.19.amzn1 I've tried everything - yum clean all and various other suggestions found on other sites. If anyone has any suggestions or a known package of the current 1.04 nginx working on EC2 Micro (Linux ip-10-56-63-85 2.6.35.11-83.9.amzn1.x86_64 #1 SMP Sat Feb 19 23:42:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux - which I think is RHEL 5?) then I'd be grateful. Incidentally, does this repolist look right? repo id repo name status CentALT CentALT Packages for Enterprise Linux 5 - x86_64 enabled: 112+157 amzn-main amzn-main-Base enabled: 2,706 amzn-main-debuginfo amzn-main-debuginfo disabled amzn-main-nosrc amzn-main-nosrc disabled amzn-updates amzn-updates-Base enabled: 328 amzn-updates-debuginfo amzn-updates-debuginfo disabled amzn-updates-nosrc amzn-updates-nosrc disabled devel_languages_python Python and Python Modules (SLE_10) enabled: 1,452+768 epel Extra Packages for Enterprise Linux 5 - x86_64 enabled: 5,892+604 epel-debuginfo Extra Packages for Enterprise Linux 5 - x86_64 - Debug disabled epel-source Extra Packages for Enterprise Linux 5 - x86_64 - Source disabled epel-testing Extra Packages for Enterprise Linux 5 - Testing - x86_64 disabled epel-testing-debuginfo Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Debug disabled epel-testing-source Extra Packages for Enterprise Linux 5 - Testing - x86_64 - Source disabled s3tools Tools for managing Amazon S3 - Simple Storage Service (RHEL_6) enabled: 2+1 repolist: 10,492

    Read the article

  • Unable to connect to OpenVPN server

    - by Incognito
    I'm trying to get a working setup of OpenVPN on my VM and authenticate into it from a client. I'm not sure but it looks to me like it's socket related, as it's not set to LISTEN, and localhost seems wrong. I've never set up VPN before. # netstat -tulpn | grep vpn Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 127.0.0.1:1194 0.0.0.0:* 24059/openvpn I don't think this is set up correctly. Here's some detail into what I've done. I have a VPS from MediaTemple: These are my interfaces before starting openvpn: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:39482 errors:0 dropped:0 overruns:0 frame:0 TX packets:39482 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3237452 (3.2 MB) TX bytes:3237452 (3.2 MB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:4885284 errors:0 dropped:0 overruns:0 frame:0 TX packets:4679884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:835278537 (835.2 MB) TX bytes:1989289617 (1.9 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:205.[redacted] P-t-P:205.186.148.82 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 I've followed this guide on setting up a basic server and getting a .p12 file, however, I was receiving an error that stated /dev/net/tun was missing, so I created it mkdir -p /dev/net mknod /dev/net/tun c 10 200 chmod 600 /dev/net/tun This resolved the error preventing the service from launching, however, I am unable to connect. On the server I've set up the myserver.conf file (as per the tutorial) to indicate local 127.0.0.1 (I've also attempted with the public IP address, perhaps I don't understand what they mean by local IP?). The server launches without error, this is what the log looks like when it starts: Sun Apr 1 17:21:27 2012 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Mar 11 2011 Sun Apr 1 17:21:27 2012 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Apr 1 17:21:27 2012 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Sun Apr 1 17:21:27 2012 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Sun Apr 1 17:21:27 2012 TUN/TAP device tun0 opened Sun Apr 1 17:21:27 2012 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500 Sun Apr 1 17:21:27 2012 GID set to openvpn Sun Apr 1 17:21:27 2012 UID set to openvpn Sun Apr 1 17:21:27 2012 UDPv4 link local (bound): [AF_INET]127.0.0.1:1194 Sun Apr 1 17:21:27 2012 UDPv4 link remote: [undef] Sun Apr 1 17:21:27 2012 Initialization Sequence Completed This creates a tun0 interface that looks like this: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And the netstat command still indicates the state is not set to LISTEN. On the client-side I've installed the p12 certs onto two devices (one is an android tablet, the other is an Ubuntu desktop). I don't see port 1194 as open either. Both clients install the cert files and then ask me for the L2TP secret (which was set on the file), but then they oddly ask me for a username and a password, which I don't know where I could possibly get those from. I attempted all of my logins, and some whacky guesses that were frantically pulling at straws. If there's any more information I could provide let me know.

    Read the article

  • Securing smtp with login

    - by Paul Peelen
    I have a ispconfig server, and it seems that someone is using it to send spam. I got about 130 "Mail Delivery System" email about declined send email. This spammer uses my email address as sent from adress, so I get all these email adresses to my mail. I am using Postfix and Courier. I installed my server according to this guide: http://www.howtoforge.com/perfect-server-debian-lenny-ispconfig3-p3 I did this a few months ago. My question: Can I secure my server to require login to be able to send email, and if so... how? Thanks! EDIT Some data from mail.log, these kind of error show up constantly: Jun 15 17:58:16 bolt postfix/qmgr[10712]: CC7DA1242AE: from=<paul@*****.se>, size=3782, nrcpt=1 (queue active) Jun 15 17:58:16 bolt postfix/smtp[11337]: CC7DA1242AE: to=<[email protected]>, relay=none, delay=4641, delays=4640/0.01/0.32/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=cmlisboa.pt type=MX: Host not found, try again) Jun 15 17:58:19 bolt postfix/smtpd[10836]: connect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: NOQUEUE: reject: RCPT from static-200-105-220-154.acelerate.net[200.105.220.154]: 550 5.1.1 <advertising@*****.com>: Recipient address rejected: User unknown in virtual mailbox table; from=<[email protected]> to=<advertising@*****.com> proto=ESMTP helo=<static-200-105-220-154.acelerate.net> Jun 15 17:58:20 bolt postfix/smtpd[10836]: lost connection after DATA (0 bytes) from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: disconnect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:29 bolt postfix/smtpd[10834]: connect from unknown[62.176.172.226] Jun 15 17:58:32 bolt postfix/smtpd[10834]: 386791241F9: client=unknown[62.176.172.226] Jun 15 17:58:34 bolt postfix/cleanup[10975]: 386791241F9: message-id=<[email protected]> Jun 15 17:58:34 bolt postfix/qmgr[10712]: 386791241F9: from=<[email protected]>, size=867, nrcpt=1 (queue active) Jun 15 17:58:35 bolt postfix/smtpd[10834]: disconnect from unknown[62.176.172.226] Jun 15 17:58:35 bolt amavis[11084]: (11084-17) Blocked SPAM, [62.176.172.226] [62.176.172.226] <[email protected]> -> <*****@*****>, Message-ID: <[email protected]>, mail_id: XczovKoMBYNr, Hits: 18.471, size: 867, 833 ms Jun 15 17:58:35 bolt postfix/smtp[10732]: 386791241F9: to=<*****@*****>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=2.7/0/0/0.83, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=11084-17 - SPAM) Jun 15 17:58:35 bolt postfix/qmgr[10712]: 386791241F9: removed Jun 15 17:58:43 bolt postfix/smtpd[10836]: warning: 178.121.154.194: address not listed for hostname mm-194-154-121-178.dynamic.pppoe.mgts.by Jun 15 17:58:43 bolt postfix/smtpd[10836]: connect from unknown[178.121.154.194] Jun 15 17:58:45 bolt postfix/smtpd[10727]: connect from unknown[180.134.223.86] EDIT #2 Got some more info from the logs, this is a send request: mail.info.1:Jun 15 16:41:57 bolt amavis[5399]: (05399-06) Passed CLEAN, [110.139.48.64] [110.139.48.64] <paul@*****.se> -> <[email protected]>, Message-ID: <CHILKAT-MID-7c54ebcf-5501-de9b-f0b1-4f0234290d8d@HP-IRISH>, mail_id: 35l56Ramx6Nc, Hits: -2.941, size: 3329, queued_as: 2485770086, 136 ms mail.info.1:Jun 15 16:41:57 bolt postfix/smtp[4743]: 375C570082: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=4.7/0/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=05399-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2485770086) Which apparently got thrue. Any ideas how to restrict this?

    Read the article

  • Issue in setting up VPN connection (IKEv1) using android (ICS vpn client) with Strongswan 4.5.0 server

    - by Kushagra Bhatnagar
    I am facing issues in setting up VPN connection(IKEv1) using android (ICS vpn client) and Strongswan 4.5.0 server. Below is the set up: Strongswan server is running on ubuntu linux machine which is connected to some wifi hotspot. Using the steps in this guide link, I generated CA, server and client certificate. Once certificates are generated, following (clientCert.p12 and caCert.pem) are sent to mobile via mail and installed on android device. Below are the ip addresses assigned to various interfaces Linux server wlan0 interface ip where server is running: 192.168.43.212, android device eth0 interface ip address: 192.168.43.62; Android device is also attached with the same wifi hotspot. On the Android device, I uses IPsec Xauth RSA option for setting up VPN authentication configuration. I am using the following ipsec.conf configuration: # basic configuration config setup plutodebug=all # crlcheckinterval=600 # strictcrlpolicy=yes # cachecrls=yes nat_traversal=yes # charonstart=yes plutostart=yes # Add connections here. # Sample VPN connections conn ios1 keyexchange=ikev1 authby=xauthrsasig xauth=server left=%defaultroute leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=192.168.43.62 rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem pfs=no auto=add      With the above configurations when I enable VPN on android device, VPN connection is not successful and it gets timed out in Authentication phase. I ran wireshark on both the android device and strongswan server, from the tcpdump below are the observations. Initially Identity Protection (Main mode) exchanges happens between device and server and all are successful. After all successful Identity Protection (Main mode) exchanges server is sending Transaction (Config mode) to device. In reply android device is sending Informational message instead of Transaction (Config mode) message. Further server is keep on sending Transaction (Config mode) message and device is again sending Identity Protection (Main mode) messages. Finally timeout happens and connection fails. I also capture Strongswan server logs and below are the snippets from the server logs which also verifies the same(described above). Apr 27 21:09:40 Linux pluto[12105]: | **parse ISAKMP Message: Apr 27 21:09:40 Linux pluto[12105]: | initiator cookie: Apr 27 21:09:40 Linux pluto[12105]: | 06 fd 61 b8 86 82 df ed Apr 27 21:09:40 Linux pluto[12105]: | responder cookie: Apr 27 21:09:40 Linux pluto[12105]: | 73 7a af 76 74 f0 39 8b Apr 27 21:09:40 Linux pluto[12105]: | next payload type: ISAKMP_NEXT_HASH Apr 27 21:09:40 Linux pluto[12105]: | ISAKMP version: ISAKMP Version 1.0 Apr 27 21:09:40 Linux pluto[12105]: | exchange type: ISAKMP_XCHG_INFO Apr 27 21:09:40 Linux pluto[12105]: | flags: ISAKMP_FLAG_ENCRYPTION Apr 27 21:09:40 Linux pluto[12105]: | message ID: a2 80 ad 82 Apr 27 21:09:40 Linux pluto[12105]: | length: 92 Apr 27 21:09:40 Linux pluto[12105]: | ICOOKIE: 06 fd 61 b8 86 82 df ed Apr 27 21:09:40 Linux pluto[12105]: | RCOOKIE: 73 7a af 76 74 f0 39 8b Apr 27 21:09:40 Linux pluto[12105]: | peer: c0 a8 2b 3e Apr 27 21:09:40 Linux pluto[12105]: | state hash entry 25 Apr 27 21:09:40 Linux pluto[12105]: | state object not found Apr 27 21:09:40 Linux pluto[12105]: packet from 192.168.43.62:500: Informational Exchange is for an unknown (expired?) SA Apr 27 21:09:40 Linux pluto[12105]: | next event EVENT_RETRANSMIT in 10 seconds for #9 Can anyone please provide update on this issue. Why the VPN connection gets timed out and why the ISAKMP exchanges are not proper between Android and strongswan server.

    Read the article

  • DNS lookups failing somewhere between firewall and router

    - by TessellatingHeckler
    we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

    Read the article

  • Facing issues in setting up VPN connection(IKEv1) using iphone (Defult Cisco VPN client) and Strongswan 4.5.0 server

    - by Kushagra Bhatnagar
    I am facing issues in setting up VPN connection(IKEv1) using iPhone (Defult Cisco VPN client) and Strongswan 4.5.0 server. The Strongswan server is running on Ubuntu Linux, which is connected to some wifi hotspot. This is the guide which was used. I generated CA, server and client certificate, with the only difference mentioned below. “While generating server certificate, as per link CN=vpn.strongswan.org instead of this I changed CN name to CN=192.168.43.212.” Once certificates are generated, following (clientCert.p12 and caCert.pem) are sent to mobile via mail and installed on iphone. After installation I notice that certificates are considered as trusted also. Below are the ip addresses assigned to various interfaces Linux server wlan0 interface ip where server is running: 192.168.43.212 Iphone eth0 interface ip address: 192.168.43.72. iphone is also attached with the same wifi hotspot. Below is the snapshot of client configurations. Description Strong swan Server 192.168.43.212 Account ipsecvpn Password ***** Use certificate ON Certificate client The above username and password are in sync with the ipsec.secrets file. I am using the following ipsec.conf configuration: # basic configuration config setup plutodebug=all # crlcheckinterval=600 # strictcrlpolicy=yes # cachecrls=yes nat_traversal=yes # charonstart=yes plutostart=yes # Add connections here. # Sample VPN connections conn ios1 keyexchange=ikev1 authby=xauthrsasig xauth=server left=%defaultroute leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=192.168.43.72 rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem pfs=no auto=add With the above configurations when I enable VPN on iphone, it says Could not able to verify server certificate. I ran Wireshark on a Linux server and observe that initially some ISAKMP message exchanges happens between client and server, which are successful but before authorization, client is sending some informational message and soon after this client is showing error as popup Could not able to verify server certificate. Capture logs on Strongswan server and in server logs below errors are observed: From auth.log Apr 25 20:16:08 Linux pluto[4025]: | ISAKMP version: ISAKMP Version 1.0 Apr 25 20:16:08 Linux pluto[4025]: | exchange type: ISAKMP_XCHG_INFO Apr 25 20:16:08 Linux pluto[4025]: | flags: ISAKMP_FLAG_ENCRYPTION Apr 25 20:16:08 Linux pluto[4025]: | message ID: 9d 1a ea 4d Apr 25 20:16:08 Linux pluto[4025]: | length: 76 Apr 25 20:16:08 Linux pluto[4025]: | ICOOKIE: f6 b7 06 b2 b1 84 5b 93 Apr 25 20:16:08 Linux pluto[4025]: | RCOOKIE: 86 92 a0 c2 a6 2f ac be Apr 25 20:16:08 Linux pluto[4025]: | peer: c0 a8 2b 48 Apr 25 20:16:08 Linux pluto[4025]: | state hash entry 8 Apr 25 20:16:08 Linux pluto[4025]: | state object not found Apr 25 20:16:08 Linux pluto[4025]: **packet from 192.168.43.72:500: Informational Exchange is for an unknown (expired?) SA** Apr 25 20:16:08 Linux pluto[4025]: | next event EVENT_RETRANSMIT in 8 seconds for #8 Apr 25 20:16:16 Linux pluto[4025]: | Apr 25 20:16:16 Linux pluto[4025]: | *time to handle event Apr 25 20:16:16 Linux pluto[4025]: | event after this is EVENT_RETRANSMIT in 2 seconds Apr 25 20:16:16 Linux pluto[4025]: | handling event EVENT_RETRANSMIT for 192.168.43.72 "ios1" #8 Apr 25 20:16:16 Linux pluto[4025]: | sending 76 bytes for EVENT_RETRANSMIT through wlan0 to 192.168.43.72:500: Apr 25 20:16:16 Linux pluto[4025]: | a6 a5 86 41 4b fb ff 99 c9 18 34 61 01 7b f1 d9 Apr 25 20:16:16 Linux pluto[4025]: | 08 10 06 01 e9 1c ea 60 00 00 00 4c ba 7d c8 08 Apr 25 20:16:16 Linux pluto[4025]: | 13 47 95 18 19 31 45 30 2e 22 f9 4d 85 2c 27 bc Apr 25 20:16:16 Linux pluto[4025]: | 9e 9b e1 ae 1e 35 51 6f ab 80 f5 73 3c 15 8d 20 Apr 25 20:16:16 Linux pluto[4025]: | 4b 46 47 86 50 24 3f 13 15 7d d5 17 Apr 25 20:16:16 Linux pluto[4025]: | inserting event EVENT_RETRANSMIT, timeout in 40 seconds for #8 Apr 25 20:16:16 Linux pluto[4025]: | next event EVENT_RETRANSMIT in 2 seconds for #10 Apr 25 20:16:16 Linux pluto[4025]: | rejected packet: Apr 25 20:16:16 Linux pluto[4025]: | Apr 25 20:16:16 Linux pluto[4025]: | control: Apr 25 20:16:16 Linux pluto[4025]: | 30 00 00 00 00 00 00 00 00 00 00 00 0b 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | 6f 00 00 00 02 03 03 00 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | 02 00 00 00 c0 a8 2b 48 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | name: Apr 25 20:16:16 Linux pluto[4025]: | 02 00 01 f4 c0 a8 2b 48 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: **ERROR: asynchronous network error report on wlan0 for message to 192.168.43.72 port 500, complainant 192.168.43.72: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)]** Anybody please provide some update about this error and how to solve this issue.

    Read the article

  • fail2ban custom action to permanent ban IPs from China

    - by John Magnolia
    When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

    Read the article

  • How to save POST&GET headers of a web page with "Wireshark"?

    - by brilliant
    Hello everybody, I've been trying to find a python code that would log in to my mail box on yahoo.com from "Google App Engine". I was given this code: import urllib, urllib2, cookielib url = "https://login.yahoo.com/config/login?" form_data = {'login' : 'my-login-here', 'passwd' : 'my-password-here'} jar = cookielib.CookieJar() opener = urllib2.build_opener(urllib2.HTTPCookieProcessor(jar)) form_data = urllib.urlencode(form_data) # data returned from this pages contains redirection resp = opener.open(url, form_data) # yahoo redirects to http://my.yahoo.com, so lets go there instead resp = opener.open('http://mail.yahoo.com') print resp.read() The author of this script looked into HTML script of yahoo log-in form and came up with this script. That log-in form contains two fields, one for users' Yahoo! ID and another one is for users' password. However, when I tried this code out (substituting mu real Yahoo login for 'my-login-here' and my real password for 'my-password-here'), it just return the log-in form back to me, which means that something didn't work right. Another supporter suggested that I should send an MD5 hash of my password, rather than a plain password. He also noted that in that log-in form there are a lot other hidden fields besides login and password fields (he called them "CSRF protections") that I would also have to deal with: <input type="hidden" name=".tries" value="1"> <input type="hidden" name=".src" value="ym"> <input type="hidden" name=".md5" value=""> <input type="hidden" name=".hash" value=""> <input type="hidden" name=".js" value=""> <input type="hidden" name=".last" value=""> <input type="hidden" name="promo" value=""> <input type="hidden" name=".intl" value="us"> <input type="hidden" name=".bypass" value=""> <input type="hidden" name=".partner" value=""> <input type="hidden" name=".u" value="bd5tdpd5rf2pg"> <input type="hidden" name=".v" value="0"> <input type="hidden" name=".challenge" value="5qUiIPGVFzRZ2BHhvtdGXoehfiOj"> <input type="hidden" name=".yplus" value=""> <input type="hidden" name=".emailCode" value=""> <input type="hidden" name="pkg" value=""> <input type="hidden" name="stepid" value=""> <input type="hidden" name=".ev" value=""> <input type="hidden" name="hasMsgr" value="0"> <input type="hidden" name=".chkP" value="Y"> <input type="hidden" name=".done" value="http://mail.yahoo.com"> He said that I should do the following: Simulate normal login and save login page that I get; Save POST&GET headers with "Wireshark"; Compare login page with those headers and see what fields I need to include with my request; I really don't know how to carry out the first two of these three steps. I have just downloaded "Wireshark" and have tried capturing some packets there. However, I don't know how to "simulate normal login and save the login page". Also, I don't how to save POST$GET headers with "Wireshark". Can anyone, please, guide me through these two steps in "Wireshark"? Or at least tell me what I should start with. Thank You.

    Read the article

  • COPSSH RSA only authentication connection problem

    - by Siriss
    Hello all- I am trying to setup an RSA Authentication only SSH/SFTP server. The SSH will be used primarily for RDC. Everything works just fine if I use password authentication. I am using Putty Key Generator to create he keys and I have pasted the key into authorized_keys file and restarted the OpenSSH server. I am using FileZilla to test the SFTP connection as that is the most important. For my tests I have created the keys without password correction. It will not work with a standard SSH connection either. It says "Server refused our key". I have recreated the key twice double checking with a guide on google, and I am pretty sure I did it correctly. I load the key file into FileZilla under settings/SFTP and try to connect and I get the following error: Disconnected: No supported authentication methods available. I have been playing with the different settings all night and I cannot figure it out. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /bin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Thank you so much for your help!

    Read the article

  • moving raid 10 to another identical server both on Smart Array 6i controllers

    - by SalimQrdl
    I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led 2,3,8 lighting. I want to move array to another identical server with same raid firmware level. What is the best strategy?: I have RAID 1+0 on bay 0 bay 1 bay 2 bay 3 As I understand bay0+bay1 are in RAID 1 , bay2+bay3 are in RAID 1, and both RAID 1 pairs are in RAID 0. So should I : Clear RAID config on new server, insert bay 0, bay 2 and power-on or Create RAID 1+0 with 1 logical volume from clear HDDs , and then poweroff ,remove HDDs and insert 2 HDDs(bay 0, bay 2) from old RAID 1+0. then power-on. (each hdd has its raid position info stored but may be could work on same config) According to documentation for Smart Array 6i it could be possible to migrate. however one requirement point is unclear for me Before you move drives, the following conditions must be met: • The array is in its original configuration. " What is orginal and non-original config for RAID 1+0? Another point "If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time." I want to move one hdd from each RAID 1 pair. to have mirrors untouched just in case. Do they mean to move all 4 simultaniously? Smart Array 6i User Guide: Moving Drives and Arrays You can move drives to other ID positionson the same array controller. You can also move a complete arrayfrom one controller to another, even if the controllers are on different servers. Before you move drives, the following conditions must be met: • If moving thedrives to a different server, the new server must have enough empty bays to accommodate all the drives simultaneously. • The move will not result in more than 14 physical drives per controller channel. • No controller will be configured with more than 32 logical volumes. • The array has no failed or missing drives. • The array is in its original configuration. • The controller is not reading from or writing to any of the spare drives in the array. • The controller is not running capacity expansion, capacity extension, or RAID or stripe size migration. • The controller is using the latestfirmware version (recommended). If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time. • In most cases, a moved array (and the logical drives that it contains) can still undergo arraycapacity expansion, logical drive capacity extension, or migration of RAID level orstripe size. When all the conditions have been met: Back up all data before removing any drives or changing configuration. This step is requiredif you are moving data-containing drives from a controller that does not have a battery-backed cache. Power down the system. If you are moving an array from a controller that contains a RAID ADG logical volume to a controller that does not support RAID ADG: Move the drives. Power up the system. If a 1724 POST message is displayed, drive positions were changed successfully and the configuration was updated. If a 1785 (NotConfigured)POST message is displayed: a. Power down the system immediately to prevent data loss. b. Return the drives to their original locations. c. Restore the data from backup, if necessary. Check the new drive configuration byrunning ORCA or ACU ("Configuring an Array" on page 9).

    Read the article

  • postfix: Temporary lookup failure for FQDN

    - by Thufir
    I'm using the FQDN of dur.bounceme.net which I want to resolve(?) to localhost. That is, I want mail to [email protected] to get delivered to user@localhost. I've tried following the Ubuntu guide on this and seem to be going in circles a bit. root@dur:~# root@dur:~# postfix stop postfix/postfix-script: stopping the Postfix mail system root@dur:~# postfix start postfix/postfix-script: starting the Postfix mail system root@dur:~# telnet dur.bounceme.net 25 Trying 127.0.1.1... telnet: Unable to connect to remote host: Connection refused root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:[email protected] 250 2.1.0 Ok rcpt to:[email protected] 451 4.3.0 <[email protected]>: Temporary lookup failure rcpt to:thufir@localhost 451 4.3.0 <thufir@localhost>: Temporary lookup failure quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# grep telnet /var/log/mail.log Aug 28 00:24:45 dur postfix/smtpd[18256]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <thufir@localhost>: Temporary lookup failure; from=<[email protected]> to=<thufir@localhost> proto=ESMTP helo=<dur> Aug 28 00:24:58 dur postfix/smtpd[18256]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur> Aug 28 00:54:55 dur postfix/smtpd[18825]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur> Aug 28 00:55:08 dur postfix/smtpd[18825]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <thufir@localhost>: Temporary lookup failure; from=<[email protected]> to=<thufir@localhost> proto=ESMTP helo=<dur> root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~#

    Read the article

  • SBS2003 to SBS2011 Migration - Installation Error

    - by Shawn Gradwell
    Microsoft Small Business Server 2003 to 2011 Migration. I followed the Migration Guide from Microsoft and the source server had no errors when running the various tests prior to the migration. I have completed the destination server setup using the Answer File and the server is up and running. It all looks good, I can access Exchange and AD and the only problem is the error message when you log in stating that the setup did not complete and to check the logs. Because all looks good I am continuing the migration to the destination server. I also have to state that this client does not use Sharepoint at all. Do I have to redo everything? Herewith the logs: [4992] 121016.225454.5905: Task: Starting Add User or Group access VSS registry. [4992] 121016.225454.7645: TaskManagement: In TaskScheduler.RunTasks(): The "ConfigureSharePointVSSRegistryTask" Task threw an Exception during the Run() call:System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) [4992] 121016.225454.7655: Setup: An error was encountered on the TME thread: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) [4956] 121016.225455.0685: Setup: _UnhandledExceptionHandler: Setup encountered an error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: The TME thread failed (see the inner exception). ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter.TasksCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass._LaunchWizard() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.RealMain(String[] args) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.Main(String[] args) [4956] 121016.225455.0865: Setup: Removed the password. [4956] 121016.225455.0905: Setup: Deleting scheduled task at path Microsoft\Windows\Windows Small Business Server 2011 Standard with name Setup [4956] 121016.225455.8055: Setup: Removed SBSSetup from the RunOnce.

    Read the article

  • nginx + php-fpm cycle redirection error on linode new vps

    - by chifliiiii
    I'm new to nginx, and I'm trying to make my first server run. I followed this guide as I'm trying to use it for a multisite wordpress site. After installing everything, I get a 500 Internal server error. If I check logs, I see this: 012/09/27 08:55:54 [error] 11565#0: *8 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /favicon.ico HTTP/1.1", host: "www.mydomain.com" 2012/09/27 08:59:32 [error] 11618#0: *1 rewrite or internal redirection cycle while internally redirecting to "/index.html", client: xxx.xxx.xxx.xxx, server: localhost, request: "GET /phpmyadmin HTTP/1.1", host: "www.mydomain.com" My conf files are the following: nano /etc/nginx/sites-available/mydomain.com server { listen 80 default_server; server_name mydomain.com *.mydomain.com; root /srv/www/aciup.com/public; access_log /srv/www/mydomain.com/log/access.log; error_log /srv/www/mydomain.com/log/error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { client_max_body_size 25M; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } } nano /etc/nginx/nginx.conf user www-data; worker_processes 4; worker_cpu_affinity 0001 0010 0100 1000; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; keepalive_timeout 5; tcp_nodelay on; server_tokens off; gzip on; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } Any help will be appreciated.

    Read the article

  • Openvpn issue with linux

    - by catsy
    So I've tried to setup openvpn, I followed some guide but it's stuck att "initialization sequence completed" with no connection and I can't find any working solution... here's the log: $Sun Sep 23 19:14:32 2012 OpenVPN 2.1.0 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010 Enter Auth Username:pumpedup Enter Auth Password: Sun Sep 23 19:14:37 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Sun Sep 23 19:14:37 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Sep 23 19:14:37 2012 LZO compression initialized Sun Sep 23 19:14:37 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Sun Sep 23 19:14:38 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sun Sep 23 19:14:38 2012 Local Options hash (VER=V4): '41690919' Sun Sep 23 19:14:38 2012 Expected Remote Options hash (VER=V4): '530fdded' Sun Sep 23 19:14:38 2012 Socket Buffers: R=[163840-131072] S=[163840-131072] Sun Sep 23 19:14:38 2012 UDPv4 link local: [undef] Sun Sep 23 19:14:38 2012 UDPv4 link remote: [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:38 2012 TLS: Initial packet from [AF_INET]192.162.102.162:1194, sid=87a95723 a6d7b7f9 Sun Sep 23 19:14:38 2012 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Sep 23 19:14:38 2012 VERIFY OK: depth=1, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=nVpn_CA/[email protected] Sun Sep 23 19:14:38 2012 VERIFY OK: depth=0, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=server/[email protected] Sun Sep 23 19:14:39 2012 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 6042' Sun Sep 23 19:14:39 2012 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1500', remote='tun-mtu 6000' Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sun Sep 23 19:14:39 2012 [server] Peer Connection Initiated with [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:41 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Sep 23 19:14:41 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.8.8,route 10.102.162.1,topology net30,ping 10,ping-restart 120,ifconfig 10.102.162.6 10.102.162.5' Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: timers and/or timeouts modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ifconfig/up options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: route options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Sep 23 19:14:41 2012 ROUTE default_gateway=10.0.2.2 Sun Sep 23 19:14:41 2012 TUN/TAP device tun0 opened Sun Sep 23 19:14:41 2012 TUN/TAP TX queue length set to 100 Sun Sep 23 19:14:41 2012 /sbin/ifconfig tun0 10.102.162.6 pointopoint 10.102.162.5 mtu 1500 Sun Sep 23 19:14:41 2012 /sbin/route add -net 192.162.102.162 netmask 255.255.255.255 gw 10.0.2.2 Sun Sep 23 19:14:41 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 10.102.162.1 netmask 255.255.255.255 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 Initialization Sequence Completed

    Read the article

  • OpenVPN on Tomato and Vista - can't see my network

    - by Ian
    I followed the instructions here (http://todayguesswhat.blogspot.ca/2011/03/quick-simple-vpn-setup-guide-using.html) to set up a TCP connection to OpenVPN on my Tomato router. Used TCP because the place I usually surf at seems to have the other ports blocked. My Vista laptop is able to connect to the router but I don't appear to be getting an IP address. I'm able to access my router's admin page, but I can't see the network at home. When I browse to Whatsmyip I see my home IP. Here are the results of route print -4 when I'm just connect to the library and when I've fired up the VP connection as well: Library only: =========================================================================== Interface List 22 ...00 ff c4 a0 e7 5c ...... TAP-Win32 Adapter V9 15 ...00 23 4e 20 b3 64 ...... Atheros AR9281 Wireless Network Adapter 10 ...00 23 8b 39 ec 71 ...... Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller 1 ........................... Software Loopback Interface 1 11 ...00 00 00 00 00 00 00 e0 isatap.{834A8A0A-5E2C-47D0-9673-7965DE8B5470} 14 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 20 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 18 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 19 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 23 ...00 00 00 00 00 00 00 e0 isatap.{C4A0E75C-765E-4F7D-A55C-77945779816A} 34 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Library and TCP OpenVPN: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.116 30 0.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 24.212.205.68 255.255.255.255 10.1.29.1 10.1.29.117 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 192.168.1.0 255.255.255.0 On-link 192.168.1.116 286 192.168.1.116 255.255.255.255 On-link 192.168.1.116 286 192.168.1.255 255.255.255.255 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.116 286 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Thanks for any advice. I looked at one of the answers but I'm not sure if it applied to me as it said that 10...* was the vpn connection, but I appear to have 10...* when I connect just to the library.

    Read the article

  • Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

    - by Towndrunk
    I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

    Read the article

  • Symantec Protection Suite and System Recovery 2011 Desktop Edition

    - by rihatum
    I am re-posting this as my previous question was being treated as if I am "Shopping or seeking Product Recommendations" even though I was NOT - BTW they have deleted my comments too which were not offensive in nature. anyway - I have re-phrased some parts of my question and I hope SF Admins "Do Not Modify / Edit" this one - will be most grateful for that. I have a lot of respect for the People who visit this SITE and help others ! Just To clarify : Just to go by SF rules - I am not seeking someone to Design this solution, I am simply seeking real world examples, experiences, technical expert opinions / suggestions, any tips or tricks they may have or any problems they may have faced while doing something similar above with these products. I am also not asking for Capacity Planning for Storage, We have done some research and I am seeking Expert Assurance / Suggestions. We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Server Hardware : Per SQL Server : 16GB RAM + SAS DISKS + Dual XEON, RAID-10 for the SQL DB or I can always mount a LUN from our existing Hitachi or EMC SAN. SEPM Server : 16GB RAM + SAS DISKS + DUAL XEON System Recovery MGMT SERVER : 16GB RAM + SAS DISKS + DUAL XEON Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) We have netbackup in our environment backing up other servers, I am planning to protect these 4 (2 x SQL, 1 x SEPM, 1 x System Recovery Mgmt. Server) via netbackup or I can use System recovery 2011 server edition on all 4 of these boxes as well. (License is not an issue as we have the complete symantec portfolio included in our license). d) Now - Saving Desktop backups - What strategies have you implemented ? Any best practice recommendation for a large user base ? I was thinking to either mount a LUN from our Hitachi SAN on the Symantec Recovery Server itself or backup to the users hard drive locally and then copy it over to a network location ? Suggestions welcome :-) If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks !

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >