Search Results

Search found 11124 results on 445 pages for 'optical drive'.

Page 220/445 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• Disk quota problem in Windows Server SBS 2003

  - by deddebme

  I have got a new job and the existing SBS 2003 domain setup is unsecure (i.e. everyone is a domain admin etc etc). There are lots of problem due to inexperienced "network admin", and I am trying to fix them one by one. There exist one issue which I found quite weird, that the "Quota" tab exists in the C:(NTFS) drive but not the D:(NTFS) drive. I played around with gpedit to enable disk quota (it was "not configured" before), but still I can't see that tab. Have you seen this problem before? How did you solve it?

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• How do I back up my Windows partition from an Ubuntu live CD?

  - by lalli

  My Windows partition (C:) is corrupt. I'm booting up from an Ubuntu live CD and trying to copy all the files from C: to my external drive, but the system expands all of the links, producing a projected copy size of 1.8TB (my external drive is just 1TB, and the data in c: is around 700MB). Then I looked at dd and other backup utilities. Anything I looked into, I couldn't figure out whether or not the image would be readable in Windows through any other app. Has anyone else tried to back up data from a corrupted Windows installation using Ubuntu?

  Read the article

• Intsalling Linux on PowerEdge R410 via USB

  - by Bill Johnson

  I’m hoping someone can help me with the following issue. I have a Dell PowerEdge R410 and basically the Optical Drive has failed when I have been given the server. I have installed 2 SATA drives and want to install Ubuntu 11.04; however, each time I have tried i.e. using bootable .iso on USB it failed. I assume it's failing as with a lot of releases they all look at the CD drive. Ubunutu has failed on installation with the error message unable to mount CD. I have tried installing Microsoft Hyper-v and that also fails as during installation it asks for CD/DVD drivers. Tried embedding ISO's from various distro's (Linux and Windows) with drivers and that hasn't worked out either. Does anyone have any idea on how I can get Ubuntu on this server? Should I look towards an old distro perhaps?

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• vmware problems

  - by AO

  I renamed some of my virtual machine files and never did a backup before doing so. Now I can't get the machine to start again as it asks for the old files. I have updated references to these files in the project setting files which are in plain text. The virtual machine keeps on asking for the files anyway. I never shut off the machine properly before starting to rename the files. How can I save my work done on the virtual machine disk? I have tried to create a new machine and adding the disk from the old virtual machine only but there seems to be dependencies between disk files. The parent drive cannot be found I am told when trying to add the drive of interest. Any suggestion on how to resolve the issue?

  Read the article

• Security of BitLocker with no PIN from WinPE?

  - by Scott Bussinger

  Say you have a computer with the system drive encrypted by BitLocker and you're not using a PIN so the computer will boot up unattended. What happens if an attacker boots the system up into the Windows Preinstallation Environment? Will they have access to the encrypted drive? Does it change if you have a TPM vs. using only a USB startup key? What I'm trying to determine is whether the TPM / USB startup key is usable without booting from the original operating system. In other words, if you're using a USB startup key and the machine is rebooted normally then the data would still be protected unless an attacker was able to log in. But what if the hacker just boots the server into a Windows Preinstallation Environment with the USB startup key plugged in? Would they then have access to the data? Or would that require the recovery key? Ideally the recovery key would be required when booted like this, but I haven't seen this documented anywhere.

  Read the article

• Adding unallocated partition to Ubuntu in VMware

  - by AMS949

  I've installed Ubuntu 9.10 on a Windows XP using vmware. As most do, I initially setup the size of the virtual drive to 8GB and soon realized I need more. I used the VMware utility to expand the virtual drive and added another 4GB, which I can see using GParted. Now my dilemma is how can I "merge" the newly created space to my original? I need to add the unallocated space. I tried before and after formatting the new space but still whenever I try to resize/move /dev/sda1 it looks like it is using its maximum capacity. Also, GParted is being used from the GParted live CD not from the Linux live CD.

  Read the article

• Connect a ssd externally such that hdparm is fully supported

  - by student

  I am just trying some hdparm magic with my new ssd (samsung 840 pro). However I don't want to change my drive over and over so it would be great if I could connect it externally to my laptop. I have a cheap sata-usb Adapter, but I feel it doesn't support the ATA commands send by hdparm. So what's the best way to do this? Are there sata-usb Adapters which fully support the hdparm things? Would it be a good idea to buy a sata-esata adapter to get full control over the drive?

  Read the article

• Unable to boot fedora 11

  - by csunwold

  I have been running fedora 11 for several months without a hiccup, but two days ago I ran "yum update" and installed whatever updates were available (I didn't pay attention to what they were). I was having problems with mysql so I tried "yum remove mysql" and then it removed mysql as well as quite a few unexpected dependencies. I then "yum install mysql" without a hitch and went about my way. However, when I next booted up my machine it got to "Starting preload dameon [OK]" and then it hangs with a flashing cursor on the screen. I tried following http://dailypackage.fedorabook.com/i...ling-Grub.html but it didn't seem to make any difference. I put a new hard drive with WinXP on it into the same machine that I booted to, and I tried to use Ext2 Installable File System for Windows but when I run it, it only seems to see /boot and nothing else on the hard drive. Any ideas?

  Read the article

• Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

  - by JJGroover

  Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• Software that supports ATA Secure Erase Command

  - by vy32

  We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

  Read the article

• MacBook Refuses to Boot

  - by pas09

  I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• Finding the file that is on a bad block on a HFS+ volume (debugfs for HFS+)

  - by Blair Zajac

  I have a drive in our iMac that has bad blocks, as booting from an Ubuntu 11.10 live CD and using ddrescue -f /dev/sda /dev/null finds them. I'd like to get the drive to remap them by writing to the blocks, say using hdparm --write-sector, but I don't want to do this without knowing what's in those blocks and finding the file that owns them, so I can restore the file from another source. I found fileXray but don't feel like spending $79 to map a block to a file and hfsdebug has been taken offline. Are there suggestions on a tool or technique to use? I looked at all the Ubuntu HFS+ packages to see if they could provide this info but nothing jumped out at me. BTW, I used Disk Utility to erase the empty space, but it didn't get any of the bad blocks to be remapped, according to smartctl -A.

  Read the article

• ESXi 4.0u1 - backup/copy options

  - by Hanadarko

  I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

  Read the article

• opening Dbf files in oracle 10g

  - by nagaraju

  This nagaraju,from India,Hyderabad. I have installed oracle 10g trail version in my system(E drive),created one database with my name(database:-nagaraju),in that created tables, prodecures ,functions ,sequences etc for my project. Due to some sudden problem,i formatted my machine C drive,now iam not ablle to open my database, i need all procedures ,tables which i created in that. Now I newly installed oracle10g again in another folder,how can i copy my old database into my inew installation database. Or can i copy the script of procedures so that ican run in new database. I have all data in Oradata folder,like DBF files etc. Could you please help me, how to do that?

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Read/WRITE/Verify disk diagnostic tool for Mac OS X?

  - by Spiff

  It seems that there are many tools out there for Mac OS X that test a hard drive for bad blocks by doing a Read/Verify pass. That is, they read a block, then read it a second time, and verify that both reads yielded the same results. I need a tool that does a non-destructive Read/Write/Verify pass. It should read each block, write those same contents back out, and then read it again to verify. That way every block gets written, giving the hard drive a chance to spare out bad blocks. But since the same contents that were just read get written back out, it doesn't destroy data that wasn't already lost. I'm aware of several tools that can do Read/Verify, but I'm not aware of any that do Read/Write/Verify. Are there any tools that do what I want? Unix / open source tools that compile and run on Mac OS X are fair game too.

  Read the article

• how to delete protected files in ntfs?

  - by Balchev

  Hello, I want to delete old windows directory from my system drive (C) , but I am unable to due NTFS perms.I tried from Win 7 and Win 2003, but can't do it. I tried safe mode as well with same result. I there any way to work around this (other then formating the drive)? Perhaps changing the owner or something? It errors at files like "oldwin/bfsvc.exe". Is there some "superuser" in windows similar to linux root account? Thanks

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• CentOS default installation gave 60% disk space to tmpfs partition

  - by garconcn

  I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

  Read the article

• Graciously shutdown external HDD enclosure?

  - by Jakobud

  I recently purchased a large HDD along with the following HDD enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16817173043 It has a simple on-off switch on the back. When I want to turn this thing off, do I simply just flip the switch? I assume the switch simply kills the power to the HDD, but isn't that potentially a bad thing in the case that the HDD is still reading/writing? I used to have a Seagate external HDD and it had a button on the front that I had to hold down for a second or two before it would turn off, but it at least appeared to sort of go through a shutdown procedure where it probably would stop the HDD activity before cutting power. So with this external HDD, I'm a little bit leery about that power switch and understanding exactly what it does. Is this how all HDD enclosures are? EDIT: I'm running the drive in Ubuntu Server. So there is no 'ejecting' the drive lol

  Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >