Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 220/584 | < Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >

  • suggestions for migrating a windows 7 install to a new 4K sector disk

    - by myCubeIsMyCell
    Hi, I'm looking to upgrade the disk on a windows 7 box to a new larger drive. In the past for such migrations I'd just hook both drives up and use a linux boot disk and use dd to copy from one disk to the next... boot up the new drive & expand the partition. The drive I just purchased however is a western digital using 4k sectors... not sure if there'd be any complications using my old method moving from a 512b sector drive. Current plan is to try the migration by doing a win7 system image backup to an external drive... then restore the image to the new drive via system restore boot disk. Any suggestions or recommendations on how to best complete this migration would be greatly appreciated. Thanks!

    Read the article

  • Is Samba Server what I'm looking for, and if so, what do I need? (currently on DD-WRT Micro)

    - by Anthony
    I am really confused as to what Samba actually does and how it works. Here's what I'm hoping it does: I set up a Samba server on my LAN, and everyone will be able to see each other's shared files and swap them. But some of the documentation makes it sound like it will just allow Mac/Linux computers to see Windows computers. Other bits of the documentation make it sound more like a local server, where a Linux machine would install Samba and they would see everyone and be visible to everyone, but that won't change if anybody else can see each other. While still other things I've read make it seem more like a file-server, where everyone sees each other but file transfers are not peer-to-peer but instead need a host disk for files to act as go between. So, assuming I'm even in the right ballpark of what Samba does in terms of my goal of total cross-visibility on the network, I am left with needing to know what I'd need to set up the server and whether it can be done and is worth it... DD-WRT's article on Samba is a bit ambiguous. One second it sounds as if I can run the server on micro as long as it's set up on a usb drive, but then it also sounds like micro can't run it at all, etc. If I can run it from a usb-connected drive, I still need to know if the files are actually stored on that drive. The dd-wrt article mentions: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network. That one part "to share a drive...among all the computers" makes it sound like the only benefit I get from Samba is a share drive that any OS on the network can see, but they still won't see each other. But I'm very hopeful I'm misreading this. If the computers can see each other but still need the disk, how much space is generally a good idea? I'm basing this on the idea that the drive is a temporary store point. Obviously I'd have to get a drive big enough to store everything people wanted to share if the drive is a full-on file server. If I do have this all wrong, is there any software that achieves what I have in mind? Something that connects to the main router to bridge all clients?

    Read the article

  • Removing information about deleted volume

    - by Pravin
    In order to increase space in my c drive, I had to delete all my volumes and create again allocating more space to C which I did, after which my drive name G didn't exist. Before this I used to install all my softwares in G. Now since the drive does not exist, I want to remove all info about the softwares I installed in G as they got deleted when volume got deleted. I also want to install cilk++ but it gives me an error-invalid drive g:. If I insert pendrives so I get a volume named G, cilk++ installer runs but says that it will be integrated to visual studio 2008 which i previously had in G drive(but no longer exists) and doesn't show visual studio 2010 which i recently installed in C drive. How do I fix this? Please help.

    Read the article

  • Time Machine (archive) of pre-Leopard systems?

    - by benc
    I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

    Read the article

  • Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

    - by Benjamin Maus
    I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

    Read the article

  • How do you expand a raid disk array in a dell 2850?

    - by johnny
    Hi, I have a Dell 2850 and I want to install Windows 2008 Server. Problem is that my C drive only has 16GB of space. The requirements say I need at least 20. I have an open bay for a drive. If I put in another drive, how can I add that to the array and them make it only for the C drive? what do I do? Thank you. edit: I don't want to remove any drives. I just want to add a new one to the existing array. Can I do that and make sure that new drive is for the logical C drive?

    Read the article

  • How do I install win 7 to dual boot with xp which is already installed on my new computer?

    - by Rustee
    I am building a new computer and have already installed XP Pro on drive 1 partition 1. Drive 1 is a 500 gig SATA with 4 partitions (1 = 50 gig, 2 = 50 gig, 3 =200 gig, 4 = 200 gig). Drive 2 is a 160 gig SATA with 2 patitions (1 = 60 Gig, 2 = 100 gig). I would like to install win 7 on drive 2, partition 1 to dual boot with xp on drive 1, partition 1. As XP is already installed where wanted, is there anything I should know about installing win 7 on drive 2, partition 1 ? Thanks for any and all inputs. Rustee

    Read the article

  • How do I restore a SQL Server database from last night's full backup and the active transaction log file?

    - by Dylan Beattie
    I have been told that it's good practise to keep your SQL Server data files and log files on physically separate disks, because it'll allow you to recover your data to the point of failure if the data drive fails. So... let's say that mydata.mdf is on drive D:, and my mydata_log.ldf is on drive E:, and it's 16:45, and drive D: has just died horribly. So - I have last night's full backup (mydata.bak). I have hourly transaction-log backups that will bring the data back up to 16:00... but that means I'll lose 45 minutes worth of updates. I still have mydata_log.ldf on the E: drive, which should contain EVERY transaction that was committed right up to the point where the drive failed. How do I go about recreating the database and restoring data from the backup file and the live transaction log, so I don't lose any updates? Is this possible?

    Read the article

  • Ultimate way to use Picasa in a home network

    - by luisfarzati
    I've been trying a lot of approaches but still didn't find any effective solution. I want gigs of photos in a network drive (a IOMega Home Media Network Drive, plugged to my wifi router). I'd like to do 2 things: Do a Picasa import process of all the photos in the drive, making Picasa organize all the files in a year/month folder structure physically. Ideally, the import target directory should be the same network drive, otherwise I should move all the imported files in my local computer back to the drive myself. Share the Picasa database over the network, by uploading it to the network drive. Have me and other members of the family point our Picasas to the network database, and see the photos as well as make changes (tag faces, create logical albums, etc) into it. Is ANY possibility to accomplish this? Or should I be looking for another photo management app, and in that case do you know such one? Thank you!

    Read the article

  • PC won't boot, even into bios

    - by divided
    Here's the deal: I cleaned a hard drive of some viruses (externally) and put it back into the original pc. This hard drive will boot in any other pc except the original pc. When I try other hard drives in the original pc, they are able to boot. The drive has Windows XP. What is the problem? How can I get this hard drive to work properly? The original hard drive works in other PCs. The PC boots with other hard drives acting as the master. If I boot with no hard drive, I still can't get into the BIOS These are all IDE hard drives The PC doesn't beep, it just boots into a black screen with a cursor blinking in the upper left of the screen

    Read the article

  • Move 2TB Win7x64 to 640GB HDD

    - by reedacus25
    Basically I just got a new (refurbished) HP H8-1260t to use for Windows Media Center. The shipping drive is a 2TB Hitachi drive, but I have an older and barely used 640GB WD Caviar Blue 7200RPM drive I would like to move my Windows install to. I have about 750GB of data with over 1TB free left on the drive. Having googled my heart and fingers out, I would think that I can shrink my partition down to the size it is full at now with over 1TB free for a second partition where I can move my media files to further shrink my boot partition so that I can fit a system image smaller than 640GB on that WD drive. I want to have a separate drive for Media and TV Recordings from my boot disk. Does this sound like the easiest method for me? Or am I doing this all wrong. Help appreciated.

    Read the article

  • How to ignore hard drives size with Windows Server Backup (Win-2008) restore?

    - by Jason
    I used Windows Server Backup to backup my 640GB boot drive. Only about 30GB is used, and the backup was very fast. Now I am trying to restore the image to a 500GB hard drive but it is saying that the drive is too small... even though I only had 30GB on the original backup. How do I overide this and have the restore ignore that I only have a 500GB drive? If I can't, then I can't restore the hard drive with anything except one that is equal to or bigger than the original hard drive - which would be a real bummer.

    Read the article

  • How is the Ubuntu installation supposed to work?

    - by Bob D
    I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

    Read the article

  • Difficulty Mounting Volumes on a Partitioned External HD

    - by Todd
    I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

    Read the article

  • "The daemon is being inhibited" error message when mounting volumes on a partitioned external HD [closed]

    - by Todd
    I'm having a great deal of difficulty with an external hard drive. I'm currently running a dual boot system (XP Service Pack 3 and Ubuntu 11.04 Natty Narwahl) on a Dell Inspiron B120. I'm trying to set up a new 80 GB Hitachi external HD. Using GParted, I formatted the drive and set up the partitions. The partitioning scheme is as follows 10GB NTFS Primary, 2GB Linux-Swap Primary, 50GB FAT32 Primary, 12GB Unallocated. After applying those changes, I went into Disk Utility and the HD appears along with the correct partitions. When I try to mount the volumes for partitions 1 and 3, I get a pop-up stating: Error Mounting Volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. When I try to to check the filesystem I get a pop-up stating: Error Checking filesystem on volume An error occurred while performing an operation on "Home" (Partition 3 of HTS548080m9AT00): The daemon is being inhibited. Throughout the time that I'm attempting to troubleshoot the problem, the external drive light is on and blinking. With my frustration hitting a boiling point, I try to shut down the drive and remove it so that I can plug in a different external HD that works PERFECTLY. However, when I try to shut down and safely remove the drive, I get a pop-up stating: Error Detaching Drive An error occurred while performing an operation on "80GB Hard Disk" (HTS548080m9AT00): The daemon is being inhibited. Can anyone tell me what I'm doing wrong? I'm a newbie and not that skilled with terminal commands, so please dumb it down for me if you request specific command output.

    Read the article

  • Is there a command to "manually automount" an attached disk?

    - by cheshirekow
    I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

    Read the article

  • Install on Acer Aspire 4752

    - by user216962
    I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

    Read the article

  • No space left on disk

    - by Ned
    folks. I'm trying to copy/move files to an external 1 TB hard drive with about 50 GB remaining space. I receive a "no space left on disk" when I try. I've moved files off and retried, but still get the same message. Disk Usage Analyzer, Properties, and freeware Treesize all report available hard drive space of about 50 GB. I've tried df -i (50 GB available) and df -k, with the latter reporting only 1% of inode usage. I've been able to save files from Firefox to the drive also. I can't even rename files without getting the message. Yesterday in the midst of trying to figure this out I tried to move 4 files to the drive and got the message. Today, I found them on the drive. What's up with that? (That's the only time that has happened to my knowledge.) Is this an ubuntu problem? or is my hard drive just about to fail because of something like a controller problem? Any thoughts would be appreciated.

    Read the article

  • Expanding RAID-5

    - by Garry
    I'm new to RAID and trying to get my head around things. I have owned a Drobo in the past (which I liked) but it failed. Here's a hypothetical scenario: Assume I set up a RAID-5 array consisting of four 1TB hot-swappable 2.5" SATA drives. I name this volume 'My Data'. By my calculations, that would give me 2.7TB of usable space and the ability to recover if a single drive fails. I have a few questions: What happens if I pull out a single 1TB drive and replace it with a 2TB drive? Would the array automatically rebuild itself with no issues? Would the maximum capacity remain 2.7TB? If number (1) above is true and the array rebuilds itself with three 1TB drives one 2TB drive what would happen if I then pulled another 1TB drive out and stuck in a 2TB drive (you can see where I'm going here can't you). Would I eventually be able to gain more storage by gradually adding bigger drives? From a practical point of view, how much input is required from me as the end user whilst these drives are being pulled out and put in? On the Drobo, the storage space just automagically handles itself. Would I have to be actively involved in telling Ubuntu what was going on or would any of it be automated? Thanks in advance,

    Read the article

  • GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

    - by AndiDog
    I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

    Read the article

  • I have Ubuntu only and need to install Windows

    - by Terzuz
    I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

    Read the article

  • How to recover missing folders in a Windows-Ubuntu dual-boot system?

    - by UnhappyGhost
    I have Windows 7 and Ubuntu 12.04 as dual-boot and on the same 500GB HDD. I have partitioned the drive into NTFS file system from Windows before I installed Edubuntu 12.04 in the remaining free space. Now, there is a drive(G:) accessible through Windows and has few folders. I boot into Edubuntu and create a folder "LinTor" and download movies and few software from torrentz. Before I download, it showed 49GB free out of 62GB. After all the downloads it showed 31GB free out of 62GB. Then I boot into Windows and I couldn't find this "LinTor" folder. I wondered that might be happening as I hibernate Edubuntu (using sudo pm-hibernate) and then boot into Windows. I then create another folder in the same drive(G:) with the name "001" to check if this was accessible from Edubuntu. Now I reboot into Edubuntu to find that "LinTor" folder has disappeared and "001" folder wasn't showing up either. Surprisingly, the drive size still shows 31GB free out of 62GB but when I check it from Windows, it shows 49GB free of 62GB. There is one thing I would like to mention. When I was trying to unmount the NTFS drive(G:) from Edubuntu before booting into Windows, it prompted me with this message: Do you want to empty the trash before you unmount the drive? Once the trash is emptied the data is permanently deleted and cannot be recovered. Please help me understand what could be the problem and how do I recover the missing folder?

    Read the article

  • Upgrading a hard disk – To repave or to migrate, that is the question

    - by guybarrette
    I recently changed my laptop hard disk from the stock 250GB 5400 drive to a 320GB 7200 drive.  And no, I didn’t bought a SSD drive because the cost is way too much right now.  At $70, my upgrade was a lot cheaper than a SSD drive.  Maybe next year. When changing a system main hard drive, one must ask himself: To repave or to migrate, that is the question.  I choose to migrate so I went to the Acronis Website to take a look at their product line.  They have a few products that could do the job.  One being Acronis Migrate Easy 7.0 and the other being Acronis True Image Home 2010.  Since True Image was just $10 more then Migrate Easy, I bought True Image. I inserted my new hard drive in a 2.5” USB enclosure, and started the migration process.  Once the data copied, I switched the drives.  The process went very smoothly and without hiccups.  Highly recommended. BTW, Acronis offers free trials so I guess that nothing can stop you from “testing” a migration  ;-) var addthis_pub="guybarrette";

    Read the article

  • Data recovery on a Samsung SV1203N HDD

    - by Jim Conace
    Let me start by saying that I am a beginner in Ubuntu, but pretty knowledgeable with Windows. I am having a strange problem trying to recover data from a Samsung SV1203N HDD (120 GiB). I have tried numerous things in both Windows 7 and Ubuntu 12.04 LTS (on a flash drive, an external HDD and a Live CD). This drive has some very important data on it and I am praying some of you Ubuntu geeks can help me get it back. Here's my problem. The HDD is clicking while I am booting, but it stops when I get into Ubuntu or Windows. It refuses to be detected in the bios, so I cant perform any tests on it. I have tried numerous things in both Windows (repair CD, Jumpers, etc.) and Ubuntu (Boot-Fix, GParted, Testdisk, Photorec, forcing a mount, etc.). But it all seems to lead me back to the fact that the drive is not being recognized in the BIOS. I've even tried chilling the drive in the fridge, which worked well for another drive I work on, and I recovered all of the data in Ubuntu flawlessly. I am assuming that since the drive stops clicking when I get into the OS' that there is hope for recovery. I am going to try an IDE/SATA to USB cable, and replacing the Logic Board, but I want to exhaust all other possibilities before I do that. Any help would be greatly appreciated Bye

    Read the article

  • How long will a "safely stored" Solid-State-Drive (SSD) keep its data? (e.g. bank safety-deposit box)

    - by user31575
    Here's my usecase: once-and-only-once copy off photos/videos to an internal SATA Solid State Drive (SSD) put this drive in a well-ventilated, air-conditioned bank "safety deposit box" for safe keeping The question: How long can I safely store a solid-state-drive in such an environment? i.e. 0% bitrot, 100% success when "plugged in" Are some SSD drives more reliable than other for this usecase? (e.g. smaller size vs larger size, SLC vs MLC, different brands, etc) More fodder: I have read that solid state memory cards (e..g compactflash, or sd cards) have much longer durability than other media (DVD's, CD's, hard drives) for this usecase (guaranteed against bitrot/other dysfunction on the order of ~ a decades vs a year ). I don't know if this applies to "SSD hard drives". Copying to one 500Gb ssd vs 8 64gb flash drives is easier SSD SATA hard drives have no moving parts, but they have more "visible electronics" than a compact flash card. I don't know if this "visible electronics" can fail, i.e. in contr I know many will point to carbonite, other cloud backup stuff, but I like the simplicity of having physical copies and wanted to understand the risks/implications thanks,

    Read the article

< Previous Page | 216 217 218 219 220 221 222 223 224 225 226 227  | Next Page >