Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 221/607 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Installing Windows 7 from USB on a Thinkpad T61

  - by Halik

  I am trying to install Windows 7 Professional from USB 3.0 flashdrive, on a Thinkpad T61. The problem is, Thinkpads BIOS will not detect the flash drive as bootable medium, and won't allow to boot from it. What I did: Enabled USB BIOS Support in BIOS (it was on by default) In startup menu, added USB HDD to boot order (it has '-' sign in front of it) Created Windows 7 install media with UNetbootin, WinUSB (linux tool) dd and Grub4DOS. As you can tell, currently, I only have access to Linux machine to make the flashdrive. What happens: The T61 BIOS shows '-USB HDD' in boot order menu. The '-' sign suggests that the plugged flash drive is currently not bootable. The same flashdrive (with the same Windows image on it) is booting without any problems on a Dell D430 and Lenovo Y550. Also, Ubuntu 12.04 install USB created with Unetbootin shows as bootable ('+' sign in BIOS boot order menu) and boots from the F12 boot menu. Additional info thinkwiki.org says that some Thinkpad BIOSes do not use MBR on flashdrives. It suggests using Extended-IPL boot loader, but the provided links are broken and there seems to be no mirrors. Solution: http://superuser.com/a/430186/54970

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• RAID6 mdraid -> LVM -> EXT4 root with GRUB2?

  - by Rotonen

  2012-03-31 Debian Wheezy daily build in VirtualBox 4.1.2, 6 disk devices. My steps to reproduce so far: Setup one partition, using the entire disk, as a physical volume for RAID, per disk Setup a single RAID6 mdraid array out of all of those Use the resulting md0 as the only physical volume for the volume group Setup your logical volumes, filesystems and mount points as you wish Install your system Both / and /boot will be in this stack. I've chosen EXT4 as my filesystem for this setup. I can get as far as GRUB2 rescue console, which can see the mdraid, the volume group and the LVM logical volumes (all named appropriately on all levels) on it, but I cannot ls the filesystem contents of any of those and I cannot boot from them. As far as I can see from the documentation the version of GRUB2 shipped there should handle all of this gracefully. http://packages.debian.org/wheezy/grub-pc (1.99-17 at the time of writing.) It is loading the ext2, raid, raid6rec, dosmbr (this one is in the list of modules once per disk) and lvm modules according to the generated grub.cfg file. Also it is defining the list of modules to be loaded twice in the generated grub.cfg file and according to quick Googling around this seems to be the norm and OK for GRUB2. How to get further by getting GRUB2 to actually be able to read the content of the filesystems and boot the system? What am I wrong about in my assumptions of functionality here? EDIT (2012-04-01) My generated grub.cfg: http://pastie.org/3708436 It seems it first makes my /usr logical volume the root and that might be source of the failure? A grub-mkconfig bug? Or is it supposed to get access to stuff from /usr before / and /boot? /boot is on / for me - no separate boot logical volume.

  Read the article

• Is there a way in Windows 7 to disable "journaling"?

  - by Psycogeek

  C:\$extend\$Usn.Jrnl:$J:$data Here is a picture finally. The large strip in the center of the top band is the largest chunk, in the other, grey areas are the various clusters with it. On the right, the big long grey line is $logfile (not paging), and it is 63&nbsb;MB. Paging, 500&nbsb;MB is the dark cyan chunk, next to the yellow MFTres in the inner rings.. The disk was defragged so they could be seen easier. Not all clusters of this type of file are tagged, but the idea is there. The disk is 4k clusters, now about 12 GB size. Each cute little block in the picture is .81 MB and represents 207 clusters. The dkGreen section, is mostly the whole Winsxs pile, also interesting when they keep telling us it doesn't take much disk space. Wikipedia suggests that in previous NT systems "USN journaling" would be turned on when enabled (assumes it could also be turned off?). What aspects, services, or program is working on putting that stuff all over the disk which is known by $jrnl$ type clusters, even if it is not actual USN journaling? Is it possible in a Windows 7 system to completly disable the journaling, and what would be the ramifications of that? On a Windows XP NTFS system, I do not recall seeing the quantity of disk clusters used with these $jrnl$ names, so I do not recall this being necessary in this quantity for an NTFS file system itself? I understand that it would not be there, if it did not have a useful function :-) Information about how wonderful is fine, if that information will help track down what parts of the system create and use it. Change Journals states: Change journals are also needed to recover file system indexing Hmm, that might explain some of them, or why it was left on the disk. A crash while background indexing?

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• Cloned Win7: Keyboard doesn't work

  - by Marc

  I cloned my old Windows7 hard disk to a shiny new Seagate Momentus XT 500GB using the free EaseUs Disk Copy tool on my laptop. After the clone process I used the Windows 7 installation disc to start the automatic startup repair. This took maybe 15 minutes and then my cloned disk was able to start. Now the cloned disk boots until the login screen and then I can't do anything because my keyboard just doesn't work. I tried connecting an external USB keyboard but this didn't help. The mouse is working fine. Note that the keyboard works fine in BIOS and in the Windows startup options menu. I booted into safe mode and again the keyboard is not working at all. I also noticed that the letters "Press CTRL+ALT+Delete to login" are now shown in italic font but they used to be shown non-italic on the original disk. I have now replaced the clone with the original disk again and from here everything works fine. Doesn't anybody have an idea how I can get my keyboard back?

  Read the article

• How ZFS handles online replacement in a RAID-Z (theoretical)

  - by Kevin

  This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Western Digital HDD disappears and reappears in BIOS

  - by tbkn23

  I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

  Read the article

• SATA DVD drive refuses to read movie DVDs

  - by poke

  Hey, I have a problem with my DVD Drive (Asus DRW-2014L1T, most current firmware installed) on Windows 7 x64. When I insert a DVD movie and Windows starts to access the drive (for autoplay, or when I manually click on the drive icon), my computer hangs up in a particular way, while trying to read the disk. Explorer stops reacting and several programs won't run or their launch is horribly delayed (like the device manager). In th end, I can't access the movie and can't even eject the disk (probably because Windows is still trying to access it). To get the disk out of the drive I then have to reboot (which sometimes doesn't work either) and eject the disk before Windows boots. BIOS recognizes the drive just fine, and Windows is also able to read data disks (tried it with some software disks), but just refuses any movies. I have checked the region code in the device manager, but it is correct. My notebook is reading the disks just fine btw.. I remember having the same problem with an older drive as well, but I don't remember what I did to make it work again (maybe I didn't even fix the problem back then). I do remember however that booting with the disk inserted made Windows recognize the disk, however this doesn't work in this situation either. Do you have any idea what to do to fix that problem?

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Partition problem tyring to install window 7 starter

  - by ant2009

  Hello HP Mini 210 I am trying to install windows starter 7. Currently I have installed fedora 14 xfce. And I have allocated 24 GB NTFS for hard disk for the windows partition. My current partitions are as follows: /dev/sda2 97G 4.9G 91G 6% / tmpfs 494M 92K 494M 1% /dev/shm /dev/sda1 485M 68M 392M 15% /boot /dev/sda5 169G 26G 135G 16% /home I have created a boot USD to install windows starter 7. When the computer boots into the windows setup and I selected the partition I want to install windows on. I get the following message: "Setup was unable to create a new system partition or locate an existing system partition." This is setup displaying all my partitions: Disk 0 Partition 1 500MB 0 Primary Disk 0 Partition 2 97.7GB 0 Primary Disk 0 Partition 3 4GB 0 Primary Disk 0 Partition 4 171.3GB 0 Logical Disk 0 Partition 5 24.6GB 24.5 Logical <-- Trying install on this partition NTFS I have also tried to delete the partition in setup and create a new one. And also tried to format the partition. However, I still get the same error message. Many thanks for any advice,

  Read the article

• Tried to install Mint to a Flash Drive. Now I can't boot from the main hard disk.

  - by Dan

  Hello, all. I'm kind of new to Linux and I need some help. I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt: error: no such device: (some long hex val) grub rescue> However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation, but, again, I'm kind of new to Linux, so I'm not sure exactly why. Any help is greatly appreciated.

  Read the article

• SBS 2008 Backup Drive Full - Error Code '2147942512'

  - by HK1

  We are using Windows Backup on SBS 2008 SP2 and backing up to 1TB external hard drives. Recently after switching drives our backup started failing because the backup drive is full and auto-delete isn't automatically deleting older backups/show copies. I'm trying to get more information to help me effectively prevent this problem from reoccurring in the future. How I can tell that the drive is getting full: In the event viewer under Windows Logs Application, I'm seeing Event ID 517 but it fails to show an intelligible description. However, under Applications and Services Logs Microsoft Windows Backup Operational, I'm seeing an event with the ID of 5 and a description like this: Backup started at '10/4/2011 12:30:12 PM' failed with following error code '2147942512'. One of the most informative posts I've found on this error is located on Microsoft's Technet Forums here. In that post, a Microsoft representative gives this hazy explanation: auto-delete feature to ensure that at least some old backup copies are maintained on the disk -- does not automatically delete backups if space utilization by older copies is less than 1/8 of the disk size or in other words, 13% of the disk size. that means if the one full backup copy does not fit in the 7/8 of the disk size, backup may fail with disk full error. auto-delete will not automatically delete older versions to reclaim more older versions of backup. In the above explanation, I do not understand what is meant by "older copies" except that it appears that anything older than the very last shadow copy would be considered "older copies". I'm going to make the assumption that this problem where auto-delete will not work will affect any hard drive that is large enough to make an effective backup drive, or in other words, any hard drive that is large enough to hold more than one backup/shadow copy at once. The same MS representative proposes the solution of using a larger backup drive. I can't understand how this will help. It appears to me it will simply delay the problem until a later date. In order to resolve this problem for now, I did the following: Assign the backup drive a disk letter under disk management. Run the command line with Administrative rights. diskshadow.exe [enter] delete shadows oldest x: [enter] (where X: is the letter you assigned your backup drive) I manually ran the above command some 60 or 80 times to free up about 200 GB of space on my 1 Terrabyte External Hard drive. However, I do not feel this is a satisfactory solution to prevent the problem from happening again in the future. Does anyone have a solution to prevent your Windows Server backup drive from getting full?

  Read the article

• Ububtu server 12.04 auto installation freezes at kickseeding running if ks.cfg has post scripts

  - by john206

  I'm trying to make a custom Ubuntu Server iso file. Kickstart file (ks.cfg) runs smooth when there is no %post in the file and Ubuntu installs correctly with ks configuration. Installation finishes installing base, apt, grub and It echos: Kickseed Running... and it freezes @ 0% I thought may be apt-get update doesnt work in ks file, I tried to install other apps like apache2 but no luck I have created dozen iso images and installed them in Virtual Box.I have been googling for 3 days and checked out ubuntu forums but haven't figured out the issue. I appreciate your help. This is how I made the iso image. My ks.file and txt.cfg files located in isolinux directory: root@ubuntu:/home/work mount -o loop ubuntu-12.04-amd64.iso original-iso/ rsync -a original-iso/ custom-iso/ cp ks.cfg custom-iso/isolinux/ cp txt.cfg custom-iso/isolinux/ chmod -R 777 custom-iso/ #Creating Iso image mkisofs -D -r -V “$IMAGE_NAME” -cache-inodes -J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o ~/ubuntu-12.04-alternate-custom-amd64.iso custom-iso/ ks.cfg #Generated by Kickstart Configurator #platform=AMD64 or Intel EM64T #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard us #System mouse mouse #System timezone timezone America/Los_Angeles #Root password rootpw --iscrypted somethingsomething #Initial user user ubuntu --fullname "ubuntu" --iscrypted --password somethingsomething. #Reboot after installation reboot #Use text mode install text #Install OS instead of upgrade install #Use CDROM installation media cdrom #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --size 128 --fstype=ext3 --asprimary part / --size 512 --fstype=ext3 --asprimary part swap --size 512 part /tmp --size 512 --fstype=ext3 part /var --size 512 --fstype=ext3 part /usr --size 4096 --fstype=ext3 part /home --size 2048 --fstype=ext3 #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 #Firewall configuration firewall --disabled --http --ftp --ssh #X Window System configuration information xconfig --depth=32 --resolution=1024x768 --defaultdesktop=GNOME %post apt-get update mkdir /home/user txt.cfg default autoinstall label autoinstall menu label ^Install Custom Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet ks=cdrom:/isolinux/ks.cfg -- label install menu label ^Install Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz quiet -- label cloud menu label ^Multiple server install with MAAS kernel /install/vmlinuz append modules=maas-enlist-udeb vga=788 initrd=/install/initrd.gz quiet -- label check menu label ^Check disc for defects kernel /install/vmlinuz append MENU=/bin/cdrom-checker-menu vga=788 initrd=/install/initrd.gz quiet -- label memtest menu label Test ^memory kernel /install/mt86plus label hd menu label ^Boot from first hard disk localboot 0x80

  Read the article

• What might make "Xclients" be executed twice when boot system?

  - by ablmf

  For some special purpose, I modified /etc/X11/xinit/Xclients to start firefox instead of start Desktop Environment. # Argh! Nothing good is installed. Fall back to twm { # gosh, neither fvwm95 nor fvwm2 is available; # fall back to failsafe settings [ -x /usr/bin/xsetroot ] && /usr/bin/xsetroot -solid '#222E45' # if [ -x /usr/bin/xclock ] ; then # /usr/bin/xclock -geometry 100x100-5+5 & # elif [ -x /usr/bin/xclock ] ; then # /usr/bin/xclock -geometry 100x100-5+5 & # fi # if [ -x /usr/bin/xterm ] ; then # /usr/bin/xterm -geometry 80x50-50+150 & # fi if [ -x /usr/bin/firefox ]; then /usr/bin/firefox -chrome http://127.0.0.1/ -width 1280 -height 768 fi # if [ -x /usr/bin/twm ] ; then # exec /usr/bin/twm # fi This used to work fine until today I tested it on another computer. Firefox reports that there's another running instance of firefox which stops responding. Thus, firefox could not autostart as I expected. I connected the computer with SSH and I found there are 2 firefox processes: [root@my113 xinit]# ps -ef | grep firefox root 4479 4371 0 17:34 ? 00:00:00 /bin/sh /usr/lib/firefox-3.0b5/run-mozilla.sh /usr/lib/firefox-3.0b5/firefox -chrome http://127.0.0.1/ -width 1280 -height 768 root 4600 4479 0 17:34 ? 00:00:01 /usr/lib/firefox-3.0b5/firefox -chrome http://127.0.0.1/ -width 1280 -height 768 root 4940 4906 0 17:35 ? 00:00:00 /bin/sh /usr/lib/firefox-3.0b5/run-mozilla.sh /usr/lib/firefox-3.0b5/firefox -chrome http://127.0.0.1/ -width 1280 -height 768 root 4963 4940 0 17:35 ? 00:00:00 /usr/lib/firefox-3.0b5/firefox -chrome http://127.0.0.1/ -width 1280 -height 768 root 5717 5345 0 17:51 pts/2 00:00:00 grep firefox I guess, for some reason, "Xclients" is executed twice. But I really knows very little about XWindows, so if anyone here could give me some clues, I will appreciate!

  Read the article

• Why is my boot loader's stack segment at 0x3FF (end of Real Mode IVT)?

  - by Laurimann

  Title says it all. "address 0x500 is the last one used by the BIOS" - en.wikipedia.org/wiki/Master_boot_record "00000000-000003FF Real Mode IVT (Interrupt Vector Table)" - wiki.osdev.org/Memory_Map_%28x86%29 So can you tell me why NASM places my .com file's stack pointer to 0x3FF while my instruction pointer starts at 0x7c00? To me the most intuitive place for SP would be right below 0x7c00. Thanks.

  Read the article

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

• FASM vc MASM trasnlation problem in mov si, offset msg

  - by Ruben Trancoso

  hi folks, just did my first test with MASM and FASM with the same code (almos) and I falled in trouble. The only difference is that to produce just the 104 bytes I need to write to MBR in FASM I put org 7c00h and in MASM 0h. The problem is on the mov si, offset msg that in the first case transletes it to 44 7C (7c44h) and with masm translates to 44 00 (0044h)! but just when I change org 7c00h to org 0h in MASM. Otherwise it will produce the entire segment from 0 to 7dff. how do I solve it? or in short, how to make MASM produce a binary that begins at 7c00h as it first byte and subsequent jumps remain relative to 7c00h? .model TINY .code org 7c00h ; Boot entry point. Address 07c0:0000 on the computer memory xor ax, ax ; Zero out ax mov ds, ax ; Set data segment to base of RAM jmp start ; Jump to the first byte after DOS boot record data ; ---------------------------------------------------------------------- ; DOS boot record data ; ---------------------------------------------------------------------- brINT13Flag db 90h ; 0002h - 0EH for INT13 AH=42 READ brOEM db 'MSDOS5.0' ; 0003h - OEM name & DOS version (8 chars) brBPS dw 512 ; 000Bh - Bytes/sector brSPC db 1 ; 000Dh - Sectors/cluster brResCount dw 1 ; 000Eh - Reserved (boot) sectors brFATs db 2 ; 0010h - FAT copies brRootEntries dw 0E0h ; 0011h - Root directory entries brSectorCount dw 2880 ; 0013h - Sectors in volume, < 32MB brMedia db 240 ; 0015h - Media descriptor brSPF dw 9 ; 0016h - Sectors per FAT brSPH dw 18 ; 0018h - Sectors per track brHPC dw 2 ; 001Ah - Number of Heads brHidden dd 0 ; 001Ch - Hidden sectors brSectors dd 0 ; 0020h - Total number of sectors db 0 ; 0024h - Physical drive no. db 0 ; 0025h - Reserved (FAT32) db 29h ; 0026h - Extended boot record sig brSerialNum dd 404418EAh ; 0027h - Volume serial number (random) brLabel db 'OSAdventure' ; 002Bh - Volume label (11 chars) brFSID db 'FAT12 ' ; 0036h - File System ID (8 chars) ;------------------------------------------------------------------------ ; Boot code ; ---------------------------------------------------------------------- start: mov si, offset msg call showmsg hang: jmp hang msg db 'Loading...',0 showmsg: lodsb cmp al, 0 jz showmsgd push si mov bx, 0007 mov ah, 0eh int 10h pop si jmp showmsg showmsgd: retn ; ---------------------------------------------------------------------- ; Boot record signature ; ---------------------------------------------------------------------- dw 0AA55h ; Boot record signature END

  Read the article

• unable to get into windows 7 or ubuntu after system file back on a dual boot system

  - by John Jiang

  I installed ubuntu on my dell xps 9000 which originally has a window 7 installed. So after I did system file back up as told by windows 7 and restarted my computer, I received the following message right after restarting in the black screen: roughly like this: ubuntu grub error, " " symbol cannot be found. I was wondering how I can get access into windows 7 and uninstall ubuntu all together. I actually had the same booting problem after system backup before and the solution was to install two extra ubuntus but I'd prefer not to do that. I'd highly appreciate any help!

  Read the article

• security concerns in dual-boot Linux, Windows system? [closed]

  - by Brian

  I plan to install Windows Vista on my second hard drive partition, with Ubuntu Hardy remaining on the first partition. How likely is it that any security holes that may exist in Vista could allow malicious code to find its way to the Ubuntu partition or otherwise damage the system?

  Read the article

• How to inject a "runtime" dependency like a logged in user which is not available at application boot time?

  - by Fabian

  I'm just not getting this: I use Gin in my java GWT app to do DI. The login screen is integrated into the full application window. After the user has logged in I want to inject the user object into other classes like GUI Presenters which I create, so I have some sort of runtime dependency I believe. How do i do that? One solution I can think of is sth like: class Presenter { @Inject Presenter(LoggedInUserFactory userFactory) { User user = userFactory.getLoggedInUser(); } } class LoggedInUserFactoryImpl { public static User user; User getLoggedInUser() { return user; } } So, when the user is successfully logged in and I have the object i set the static property in LoggedInUserFactory, but this will only work if the Presenter is created after the user has logged in which is not the case. Or should I use a global static registry? I just don't like the idea of having static dependencies in my classes. Any input is greatly appreciated.

  Read the article

• How to reliably map vSphere disks <-> Linux devices

  - by brianmcgee

  Task at hand After a virtual disk has been added to a Linux VM on vSphere 5, we need to identify the disks in order to automate the LVM storage provision. The virtual disks may reside on different datastores (e.g. sas or flash) and although they may be of the same size, their speed may vary. So I need a method to map the vSphere disks to Linux devices. Ideas Through the vSphere API, I am able to get the device info: Data Object Type: VirtualDiskFlatVer2BackingInfo Parent Managed Object ID: vm-230 Property Path: config.hardware.device[2000].backing Properties Name Type Value ChangeId string Unset contentId string "d58ec8c12486ea55c6f6d913642e1801" datastore ManagedObjectReference:Datastore datastore-216 (W5-CFAS012-Hybrid-CL20-004) deltaDiskFormat string "redoLogFormat" deltaGrainSize int Unset digestEnabled boolean false diskMode string "persistent" dynamicProperty DynamicProperty[] Unset dynamicType string Unset eagerlyScrub boolean Unset fileName string "[W5-CFAS012-Hybrid-CL20-004] l****9-000001.vmdk" parent VirtualDiskFlatVer2BackingInfo parent split boolean false thinProvisioned boolean false uuid string "6000C295-ab45-704e-9497-b25d2ba8dc00" writeThrough boolean false And on Linux I may read the uuid strings: [root@lx***** ~]# lsscsi -t [1:0:0:0] cd/dvd ata: /dev/sr0 [2:0:0:0] disk sas:0x5000c295ab45704e /dev/sda [3:0:0:0] disk sas:0x5000c2932dfa693f /dev/sdb [3:0:1:0] disk sas:0x5000c29dcd64314a /dev/sdc As you can see, the uuid string of disk /dev/sda looks somehow familiar to the string that is visible in the VMware API. Only the first hex digit is different (5 vs. 6) and it is only present to the third hyphen. So this looks promising... Alternative idea Select disks by controller. But is it reliable that the ascending SCSI Id also matches the next vSphere virtual disk? What happens if I add another DVD-ROM drive / USB Thumb drive? This will probably introduce new SCSI devices in between. Thats the cause why I think I will discard this idea. Questions Does someone know an easier method to map vSphere disks and Linux devices? Can someone explain the differences in the uuid strings? (I think this has something to do with SAS adressing initiator and target... WWN like...) May I reliably map devices by using those uuid strings? How about SCSI virtual disks? There is no uuid visible then... This task seems to be so obvious. Why doesn't Vmware think about this and simply add a way to query the disk mapping via Vmware Tools?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >