Search Results

Search found 11685 results on 468 pages for 'intel core i5'.

Page 221/468 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• is there a bug with restart in edubuntu 12.04

  - by Ket

  After a clean install of edubuntu 12.04 on an Acer AO531-h netbook, restart doesn't work. The process starts normally but just before it shuts down the netbook freezes and I have to force shut down. The command "sudo reboot" has the same problem. I have no issues with shut down, only with restart. I'm absolute beginner. Netbook specs: Acer, intel atom CPU N270 @1.60GHz, 1.05 GHz 0.98GB RAM Dual booting with windows xp. No problems with windows.

  Read the article

• Stream sound card output to icecast2 via darkice

  - by Alberto Burgos

  I want to stream to icecast server via darkice, the default .cfg comes with /dev/dsp, witch is OSS, but there is no /dev/dsp in Ubuntu 12.10, so I tried hw:0,0, but it's just the microphone, and I would like to stream all of the sound-card output. Any ideas? cat /proc/asound/cards 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xf8700000 irq 16 cat /proc/asound/devices 1: : sequencer 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0- 0]: hardware dependent 5: [ 0] : control 33: : timer I tried following this post: How can I stream my soundcard output?

  Read the article

• AHCI Hotswap in Lucid Server

  - by chong

  Does Lucid support hotswapping of AHCI devices? Is there anything more to it than simply unmounting all filesystems on the drive to be disconnected and plugging in the new disk? 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) is the controller I'm working with. BIOS is set to AHCI. I also tried simply unmounting and unplugging. That seemed to work fine. Plugging in a new drive locked up the system. AHCI kernel module is also loaded. I've also looked at the Raid WIKI on kernel.org which talks about hardware requirements for AHCI HotSwapping of disks. My drives and cables all appear to meet the criteria, but most of that info pertains to the electrical side (grounding, etc...).

  Read the article

• Kernel freezes with nvidia optimus and bumblebee on 12.04

  - by piovisqui

  I have a Sony VAIO with Intel i7-3520M and NVIDIA Corporation GK107M [GeForce GT 640M LE]. I installed bumblebee and nvidia drivers. They work almost fine, but the system freezes like in a kernel panic once every day. I can play Dota 2 with primusrun on it with 20-30fps 1080p. But when I do something simple as expanding the KDE calendar widget from the bottom right corner, the system hangs a lot and windows borders get another border. The system freezes in not very intensive graphic tasks, for instance, ALT+TAB with KWin effects or pressing ALT+F2 for poping up the launcher. How can I solve this? Info: I use KDE. Couldn't paste de logs here, check at pastebin: http://pastebin.com/SBet8fRQ

  Read the article

• CodePlex Daily Summary for Thursday, July 31, 2014

  CodePlex Daily Summary for Thursday, July 31, 2014Popular ReleasesDbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksDynamics AX Development tools: Version 1.0.0: Alpha release of the package. I am just combining greate community tools into a package. I have not go through testing every function of the tools. However, feel free to point out if you found any bugs!Asp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityHead First C#: The Quest: The Quest: Stable release of "The Quest" game ( Lab 2 from Head First C#, 3rd edition)TCP/IP Adapter BizTalk 2013: TCPIP Adapter for BizTalk 2013 - Version 1.0: Version 1.0 This is an updated version of the BizTalk 2010 TCP/IP adapter. References have been updated and a new setup (ISLE) has been used. Follow the installation instructions below to install the adapter. Still want to automate step 4, but haven't got to it yet. Installation instructions Make sure to close the BizTalk Administration Console. Just to make sure everything gets refreshed after installation. Download and install the setup. The setup makes sure the adapter will be regis...gicon: gicon HTTP service v1.0.0: core: 1.0.0.26592 service: 1.0.0.27190 Github: http://rynnwang.github.io/gicon/ Github.io: http://rynnwang.github.io/gicon/ Codeplex: http://gicon.codeplex.com .NET required: 2.0 or above. Installation notes: 1. You need to run intallutil command to install ifunction.GuidIconHttpService.exe file as Windows Service 2. You need to update ifunction.GuidIconHttpService.exe.config file in the folder to set correct HTTP URI prefixes. In release zip by default, it is set as http://localhost:20000...TEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titlenewmail_OutlookCOM: newmail_OutlookCOM: First Stable ReleaseSharePoint - Data View Web Part Documenter: Data View Web Part Documenter 1.0: .NET Framework 4 Client Profile required for this to run on your PC. Please see the documentation for running the tool.LOL zmena skinu klienta: LOL jednoduchý menic skinu klienta: Jednoduchý prográmek, který ušetrí cas pri zmene klienta. Nemusí se proklikáva18541855 adresáru :)SSRS Plus+: Latest - SSRS Plus Application and Source Code: This release contains the Beta version with significant changes in comparison to the old release which I am keeping for legacy reasons. At some point a changeover will be made once it has been confirmed that my branch is stable and Mr Bagwan is in agreement also.CS-Script Source: Release v3.8.4: CSScript.Evaluator is migrated to Mono v3.3.0 Added aggregating //css_ignore_ns from the imported scripts cs-script.7z - CS-Script Suite (binaries, documentation, samples) cs-script.ExtensionPack.7z - CS-Script Extension Pack (additional binaries and samples) cs-scriptDocs.7z - CS-Script DocumentationDotSpatial: DotSpatial 1.7: DotSpatial.Full - includes all DotSpatial libraries, extensions and DemoMap application DotSpatial.Core - includes only DotSpatial core libraries Entire list of changes see in the issue tracker. Main changes: Improved common stability, optimized memory and speed when loading and rendering shapefiles, fixed some memory leaks in rasters and shape layers. Simplified plugin infrastructure. Now there are predefined implementations for all required components (IStatusControl, IDockManager, IHead...New ProjectsBrilliantORM: ????ORM??，??SQL?????????。???????????。Crafter: ?????? ??? ????Dotnetnuke xblog // Blog, Article, Events, Documents: xBlog is a blog program based on DNN, it has powerful functions and unique design style. In addition to article management function which common blog module hasIn Plain Sight: Embedding plain text into an image so one can hide the text "In Plain Sight". A cursory view into the world of Steganography.JS Koans Visual Studio Friendly Version: A Version of JS koans loaded into Visual StudioMy Troop First: just adding to the siteOFX Parser: Biblioteca desenvolvida em C# que traduz arquivos OFX e gera a instância de uma classe que representa o arquivo. Um exemplo de uso está disponível, assim como aOrchard Custom Code module: This module adds a very simple tool to add custom code in front-end pages head and foot.SPB Export to KeePass Import Conversion: A simple script to convert the .xml-file by konste's "SPB Wallet Export" (https://spbwalletexport.codeplex.com/) into an import format accepted by KeePass 2The unTroublemaker: The unTroublemaker is a troubleshooter program that helps your project quickly find and fix missing dependency issues using simple XML-based specifications.

  Read the article

• Very High CPU usage (100%) from just browsing the Web

  - by cole

  I tested on Firefox and Chromioum. Im at 100% while loading pages which causes them to load slow and when I dont have a application running Im at 40% CPU (At least) Everything is slow basically. Im also already on Ubuntu Classic so im not using Unity. Should I go to 10.04? is that more stable? On windows this wasnt an issue. I have a Dual Boot with XP and a 2.4Ghz Intel Celeron with 768MB RAM and an Nvidia 6200 Graphics card. I heard 10.04 was the most stable. any suggestions?

  Read the article

• Thinkpad T530 with Optimus and Docking Station

  - by Vic Boudolf

  I have a Lenovo Thinkpad T530 with Optimus video, which is not supported on 12.04.1. I don't normally need the discrete (nVidia) graphics, so I turn it off in the BIOS settings to achieve longer battery life (and so that the screen dimmer will work), but when placed in the docking station, the integrated (Intel) graphics don't power the HDMI ports. (The VGA port does work, but I want to focus on the HDMI.) This means I have to change the BIOS settings constantly. Is there any way to have the system detect the docking station and power up/enable the discrete graphics accordingly? I don't need to do it on the fly. Just at startup. This post suggests that bumblebee can turn the discrete graphics on and off for specific applications, but I just want to turn it on or off. [2 suggests that vga_switcheroo will not work with nVidia Optimus.

  Read the article

• wacom bamboo connect CTL470 "no tablet detected..."

  - by LAS

  Wacom bamboo connect CTL470 - "no tablet detected ..." I downloaded and attempted to install drivers and software -- I am relatively new in ubuntu and downloaded, extracted,ran in terminal but could not successfully install drivers and software for this device. All of this took up a good deal of space on the drive. Manual compilation failed. I need some help. How do I install so as to use this device? Or please direct me to a suitable (relative beginner) "how to". i have downloaded several packages but the install fails in Software Center and Synaptic. System: HP a1220n Intel Pentium 4 CPU 2.93 GHz OS Type 32 bit Ubuntu 11.10

  Read the article

• Black screen after select installing on a Dell Inspiron 14z

  - by Rodrigo

  I'm trying to do a dual boot on my Dell Inspiron 14z notebook, but I always get a black screen after selecting Install Ubuntu. I've tried to add nomodeset and acpi_osi="Linux" to the boot options, but it doesn't change anything. The hardware: 3rd Generation Intel® Core™ i7-3517U processor (4M Cache, up to 3.0 GHz) 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 500GB 5400 RPM SATA HDD and 32GB mSATA SSD AMD Radeon HD7570M 1GB This question isn't duplicated. I've already tested all tips in the following question! My computer boots to a black screen, what options do I have to fix it?

  Read the article

• Ubuntu 13.10 - Unity menu very slow and unresponsive

  - by VukBG

  I have a HP G62 laptop with Intel Pentium processor and ATI graphics. Since upgrade to Ubuntu 13.10, my Unity menu is very slow and unresponsive. I am using proprietary driver for my graphics For example, I'm switching between Gimp and Chrome. When I switch to Gimp, I will be stuck with Chrome menu at the top of the screen. It is really annoying and it is just one of many bugs that came up with 13.10. Any ideas? Should I just revert to default driver?

  Read the article

• Fan very loud in Ubuntu 12.10

  - by Jon

  I recently installed 12.10 on my Desktop PC, moving away from Windows 7. For some reason, the fan in my computer is making an enormous amount of noise (it is running at full speed constantly). Under Windows 7, the fan would slow itself down and run at an acceptable noise level. Now, it is nearly unbearable. Checked the processes, and none are taking up a huge load on the CPU. Please help as I really can't endure this noise, and I do not want to go back to Windows 7 on this box. Some specs: - Intel 2.26 duo core - ATI 4870 - 4GB - 650W power supply

  Read the article

• Loud fans despite cool system under Linux (but not Windows)

  - by Sman789

  My new desktop computer runs almost silently under Windows, but the fans seem to run on a constantly high setting under Linux. Psensor shows that the GPU (with NVidia drivers) is thirty-something degrees and the CPU is about the same, so it's not just down to Linux somehow being more processor-intensive. I've read that the BIOS controls the fans under Linux, which makes sense given the high fan speeds when in BIOS as well. It's under Windows, when the ASUS AI Suite 3 software seems to take control, that the system runs more quietly and only speeds the fans up when required. So is there a Linux app which offers a similar dynamic control of the fans, or a setting hidden somewhere in the ASUS BIOS which allows the same but regardless of the OS? EDIT - I've tried using lm-sensors and fancontrol, but pwmconfig tells me "There are no pwm-capable sensor modules installed". This is after the sensors-detect command does find an 'Intel digital thermal sensor', and despite the sensors working fine in apps like psensor. Help getting this to work would likely solve the problem.

  Read the article

• Question about Partitioning

  - by Trent C

  I am looking to dual boot Windows 7 and Ubuntu 13.10. I have been using windows for work and school for over a year, and have about 100 gig of stored files (backed up of course) and some paid programs. Because of this, I really want my partitioning experience to go well. Unfortunately, I am running into a bit of an anomoly When I load GPart, I see that my sda drive is unallocated http://i.imgur.com/Hi2XhIr.png Whereas my sdb appears to contain all of the windows files and partitions, and make up my C: drive http://i.imgur.com/aaCOXje.png Is this going to be an issue, as all literature on dual boot installation references sda? How do I work around it? System Info: Lenovo IdeaPad Y570- 750GB HDD with 64GB SSD Processor: Intel® Core™ i7-2670QM CPU @ 2.20GHz × 8

  Read the article

• In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

  - by Paul

  Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

  Read the article

• Does 64-bit Ubuntu work on the Acer Aspire One D255

  - by hippietrail

  The Acer Aspire One D255 is the cheapest dual core netbook on the market right now. It has an Intel Atom N550 which should be able to run a 64-bit OS. But when I try to boot the Ubuntu 64-bit live CD I only get one line of diagnostic output that it "found something" on the USB CD drive before locking up. I haven't been able to find anything by Googling yet. Could it just be driver issues for this machine or could the platform be inherently frail for running 64-bit? (My machine is two days old on trial and Windows 7 and Ubuntu 32-bit run but it has locked up under casual use on both OSes.)

  Read the article

• HP ENVY 4-Sleekbook or Samsung Series 5 NP530U3B Ultrabook?

  - by Sam

  I am a high school student and I need a laptop within the budget of 650$. I usually have a browser, microsoft office, music, and possibly a movie or something open at once. Will the HP ENVY 4's Intel Core i3 processor be enough to handle this or would I have to get the Samsung series 5 13 inch ultrabook to get this job done? I really like the look of the HP ENVY 4, but I also want a laptop that will be quick enough to handle my needs. PLEASE HELP!

  Read the article

• Ubuntu Hangs Suddenly (Dell Latitude E5530)

  - by iFadey

  I recently bought (a month ago) Dell Latitude E5530 which comes pre-installed with Ubuntu 11.10. I removed Ubuntu 11.10 and installed 12.04 LTS right after the purchase. Everything worked out of box but occasionally Ubuntu completely hangs. The screen freezes and I can't even switch to other terminals by pressing (CTRL+ALT+F*). Whenever the screen freezes, CPU fan speed also increases. This is not happening when running particular applications. I mean it can hang without giving any reason or error displayed and while running any application. In short currently I can't able to reproduce system hang myself. I also want to mention that sometimes it never hangs complete day. Here are the specs of my laptop: Processor: Core i7-3520M CPU @ 2.90GHz Memory: 8GB HDD: 500GB, 7200rpm (Model=ST9500423AS) Graphics: Intel HD 4000 Operating System: Ubuntu 12.04 LTS (64-bit) Thanks!

  Read the article

• Ubuntu 14.04 doesn't detect my discrete GPU

  - by user258887

  I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

  Read the article

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• Black screen after upgrading from 13.04 to 13.10

  - by Harri

  Just upgraded from 13.04 to 13.10 and all I got was a black screen. The hardware I'm running is Asus Zenbook UX31A (Intel GPU). I do hear that the login screen drums do play, so the system does boot to login screen. When I try to boot using kernel 3.11.0-12 recovery mode, it tells me "initctl: event failed". Then if I go on an press ctrl+alt+f2, log in and command startx, it dies because "Fatal server error: no screens found". Here are some logs from /var/log/Xorg.0.log http://pastebin.com/ZQasUKJx Kernel 3.8.0-31 work ok, as did things before the upgrade.

  Read the article

• Dimming the backlight is irreversible on a Samsung Q210 notebook, what do I do?

  - by user27304

  I'm new to the community, although I have been using Ubuntu since 2010. I have a Samsung Q210 notebook; Specs: Intel® Core™2 Duo CPU P8400 @ 2.26GHz × 2 4 Gigs RAM Nvidia 9200m GS (although system information in Ubuntu doesn't know) 194 GB HD OS: Ubuntu 11.10 Kernel is 3.0.0-12-generic-pae Although Samsung seems to be infamous for problems with Ubuntu, after upgrading to Oneiric, finally the FN Brightness Buttons are recognized. The only problem is, after dimming the backlight for a fixed amount of steps (3 or 4, I dare not count now because that would mean rebooting because I can't see anything), the display goes completely dark and using the FN buttons to brighten the backlight does not work anymore (before reaching that threshold, going brighter after dimming works). Now what do I do? File a bug report? If not, what then? If yes, how? Not sure... guess I should ask here first.. thanks for answering in advance.

  Read the article

• Is there a way to make the speaker silent while the headphone-jack keeps working? 12.04LTS

  - by Cees

  The PC I am working on is in a loud environment. If I need sound, I use the headphone. On my own account this is easy: I mute the speaker in the sound-setting. I am not the only user, others use the Guest-session. And that's what this question about: Is it possible to turn off the speaker by default on a guest-session AND leave the headphone-output working? If yes, how can I fix it? I tried to loosen the speaker (hardware) connection but it is soldered to the mainboard. The soundcard on the PC is: HDA Intel at 0xfea78000 irq 44 /proc/asound/pcm ---------------------------+ ¦00-00: ALC662 rev1 Analog : ALC662 rev1 Analog : playback 1 : capture 1¦ ¦00-02: ALC662 rev1 Analog : ALC662 rev1 Analog : capture 1 Ubuntu 12.04LTS is running on the system, my account has all the (admin) rights

  Read the article

• ati graphics always on

  - by naveen

  i use a lenovo y560 and has ubunto 12.04 and win 7 installed when i boot into ubunto i find that the ati car is always on which drains the battery and overheats the system is there any to switch off the ati graphics and use intel hd in ubuntu ati hd 5730 is the graphics card that i use and it has switchable graphics in it. in bios the only two options for video adapter is discrete and switchable after installing ati driver from amd website i am getting a commamd prompt as log in screen first error message comes as Your system is running in low-graphics mode with options to run in low graphics mode this time reconfigure exit all three options i am stuck i need to manually reboot the system

  Read the article

• 12.10 lost window maximize and minimize options, utility bar and launcher lost too

  - by user12448

  I recently installed Ubuntu 12.10 on my Dell Inspiron 7520. Everything is good except the hyperactive fans.The graphic cards are Intel and AMD Radeon 7730. I am trying to get away with the fan problem butI don't really know the terminal hence I am just trying to use the commands available on the forums.But this time I don't know what did I do that now I don't have the utility bar, launch bar and the basic features like the window minimize and maximize don't work. I have this impression I may have uninstalled some drivers . But still not sure what to do. Feel a need of dire help!

  Read the article

• You do not appear to be using the NVIDIA X driver

  - by Vishal shekhar

  my laptop has nvidia GT540m yesterday i install nvidia-current after updating fromsudo apt-add-repository ppa:ubuntu-x-swat/x-updates then i write sudo nvidia-xconfig and then reboot my desktop visual effect changes and it look good like nvidia is working but still glx i not working and nvidia-setting tells me that You do not appear to be using the NVIDIA X driver my dkms status is nvidia-current, 304.43, 3.2.0-30-generic-pae, i686: installed lspci |grep VGA output : 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) also i can not login to my admin account but when i login to standard user or guest it works but still NVIDIA X driver is not working can any one suggest something so that NVIDIA X Driver start working as i seen many forum but none worked for me earlier i tried nvidia-173 ,nvidia-current(before x-swat/updates reprository) but none works for me

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >