Search Results

Search found 39473 results on 1579 pages for 'johny why'.

Page 221/1579 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Why would one of my servers stop being able to access other servers by FQDN?

  - by Newlyn Erratt

  I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

  Read the article

• My Boot order changed. Why?

  - by Chris

  I have a laptop running Windows XP SP3 with one internal hard drive partitioned into C: (system), D: (storage) and I have an external hard drive, F: (external drive). Yesterday the machine was running fine. Today, I go back to it and see that it's just showing a blinking cursor. Checked through the BIOS and the hard drive checked out fine. CTRL-ALT-DELETED the machine a few times, but I was never able to boot back into the operating system. I threw in a live CD and found out that the boot order of the drives has changed. The external drive is now C:, the system partiton is D:, and the storage partition is E:. Does anyone have any idea of how or why this would have occured? Auto system updates are turned off so there should have been no automatic reboot of the system overnight, and anti-virius runs on the machine and has found no infections before this occured. Edit When I was looking through the BIOS of the machine, I did see that the boot order was changed. But still the same question remains, what would have caused this to happen? I can't believe that a random reboot happened and totally changed my hard drive setup.

  Read the article

• Why java -version returning a different version than the one defined in JAVA_HOME?

  - by Shekhar

  I am trying to set JAVA_HOME in Ubuntu OS. I have copied jdk 1.7 in /usr/lib/jvm and set JAVA_HOME in /etc/profile file. Contents of /usr/lib/jvm folder are as follows : shekhar@ubuntu:~$ ls /usr/lib/jvm/ default-java java-1.6.0-openjdk java-6-openjdk java-6-openjdk-i386 jdk1.7.0_01 java-1.5.0-gcj-4.6 java-1.6.0-openjdk-i386 java-6-openjdk-common java-7-openjdk-i386 and last few lines of /etc/profile file are as follows : export JAVA_HOME=/usr/lib/jvm/jdk1.7.0_01 export PATH=$PATH:$JAVA_HOME/bin After finishing all this when I run java -version command I get following output : shekhar@ubuntu:~$ java -version java version "1.6.0_24" OpenJDK Runtime Environment (IcedTea6 1.11.4) (6b24-1.11.4-1ubuntu0.12.04.1) OpenJDK Server VM (build 20.0-b12, mixed mode) and when I run ls -lah command I get following output : shekhar@ubuntu:~$ ls -lah /usr/bin/java lrwxrwxrwx 1 root root 22 Sep 29 09:58 /usr/bin/java -> /etc/alternatives/java shekhar@ubuntu:~$ ls -lah /etc/alternatives/java lrwxrwxrwx 1 root root 45 Sep 29 09:58 /etc/alternatives/java -> /usr/lib/jvm/java-6-openjdk-i386/jre/bin/java Can anyone please tell me which thing I am missing? Why Ubuntu is still pointing to open jdk and not to my jdk 7? PS : I have seen this similar question and its answers but that question is related to Windows OS and not for Ubuntu so I am reposting this similar question for Ubuntu.

  Read the article

• Why is it necessary to chmod o+r parent directory to fix 403 access forbidden error with Nginx and P

  - by davenolan

  This may be an Nginx wrinkle, or it may be because I don't understand Unix permissions. We're using Hudson CI to deploy our staging instance. So RAILS_ROOT is /var/lib/hudson/jobs/JOBNAME/workspace. Hudson runs as hudson user Nginx runs as www-data user hudson and nginx are both members of the www group root of my nginx conf points to RAILS_ROOT/public as per normal. RAILS_ROOT/config/environment.rb is owned by www-data (so Passenger runs as www-data) RAILS_ROOT and everything in it is owned by the www group and group has r/w/x permissions As it stood, Nginx threw 403 permission denied when requesting any url. error.log contained entries like this: public/index.html" is forbidden (13: Permission denied). These did not fix the or change the error (each with a stop/start of Ngnix): chmod 777 -R RAILS_ROOT chgrp www -R /var/lib/hudson I also tried Nginx as root, and passenger complained that it could not find config/environment (despite the path displayed on the error page being correct). The fix was to ensure everybody has read permissions on each directory in the heirachy. In this case chmod o+r /var/lib/hudson. But if the group has read permissions on the directory, and nginx is a member of the owner group of the directory, why was it necessary to allow everyone read permissions? Is there something have not grokked about permissions? $nginx -V nginx version: nginx/0.7.61 built by gcc 4.4.1 (Ubuntu 4.4.1-4ubuntu8) configure arguments: --prefix=/opt/nginx --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-2.2.5/ext/nginx --with-http_ssl_module --with-pcre=~/src/pcre-8.00/ --with-http_stub_status_module $cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.10 DISTRIB_CODENAME=karmic DISTRIB_DESCRIPTION="Ubuntu 9.10"

  Read the article

• Why does my DSL modem now need a reboot each time for my laptop to connect?

  - by msorens

  I have a rather peculiar home networking issue. For sometime my home network was purring along fine. I could turn on either of my laptops and they would quickly find and connect to my DSL modem (and thence the internet). Several days ago I unplugged my DSL modem for the first time in months. Upon turning it back on and waiting for the boot to finish, the lights on the panel indicated the DSL modem was fully operational, just as before. But that's not what happened. Not at all. Now when I turn on my Win7 laptop, the network icon in my system tray shows a small starburst; hovering over it the tooltip states "Not connected; connections are available". Clicking it lists several nearby networks including my own network showing a strong signal. If I click to connect, it attempts a connection but then I get a dialog stating "Windows was unable to connect to MyNet.". Turning off wireless on my laptop and turning it back on yields no difference. Running the network troubleshooter (which includes doing a repair on the network connection) yields no difference. The only remedy is to reboot the DSL modem (i.e. unplug it, wait a few seconds, then plug it back in). As soon as it goes online my laptop finds it and connects properly. To add one more twist to the story, this happened to me once before, several months ago. After a couple weeks, the situation resolved itself(!). Everything started working properly again, due to nothing I did. Final note: this problem only affects the wireless connection to the DSL modem. My desktop computer, connected via hardline to the DSL modem, connects fine when I turn it on. Any thoughts on why this is happening or how to fix it?

  Read the article

• Why is it bad to map network drives in Windows?

  - by Beeblebrox

  There has been some spirited discussion within our IT department about mapping network drives. In particular, it has been said that mapping network drives is A Bad Thing and that adding DFS paths or network shares to your (Windows Explorer/Libraries) Favourites is a far better solution. Why is this the case? Personally I find the convenience of z:\folder to be better than \\server\path\folder', particularly with cmd line and scripting (of course I'm not talking about hard-coded links, naturally!). I have tried searching for pros and cons of mapped network drives, but I haven't seen anything other than 'should the network go down, the drive will be unavailable'. But this is a limitation of any network-accessed storage... I have also been told that mapped network drives poll the network when the network resource is unavailable, however I haven't found more information on this. Wouldn't this still be an issue with other network access mechanisms (that is, mapped Favourites) whenever Windows tries to enumerate the file system (for example, when a file/folder picker dialog is opened)? -- Do network drives poll the network any more than a Windows Explorer library/favourite?

  Read the article

• Why does MOSS sometimes delete an existing user from a site?

  - by Jesse

  I'm experiencing an issue with a MOSS installation. I am using the Site Settings Permissions to add an Active Directory account as a valid user of a site. This entails validating that the user account name is correct via the 'Check Names' button, then giving them 'Contribute' permissions. Once this is done they appear as a user on the 'All People' page. This works fine and the user is able to access the site. At some point in the future (sometimes several days later) the user account is somehow removed as a valid user from the site. This site resides in a test environment so access is pretty well controlled; which has allowed us to rule out someone else going in and removing the user manually. This appears to be something that is being done by the system itself and we have no idea why. We can manually add the user back, but then it will eventually get removed again later. I have an admittedly limited understanding of SharePoint permissions, but I believe that SharePoint stores valid users in a SQL database and I would assume that when dealing with Active Directory accounts it would be storing the user name and probably the SID. It appears that for some reason this record is later getting deleted out of the database, as the users will suddenly disappear from the "All People" page and will start getting "Access Denied: You are not authorized..." messages when trying to access the site. Has anyone seen this behavior before?

  Read the article

• Why does Google Chrome ignore "last_known_google_url" property in "Local State" file?

  - by Peter Sivák

  I want to force my Google Chrome web browser (version 21.0.1180.89, 64-bit) to use non-localized search (thus google in english) through address bar, using the default Google search engine. To achieve that, I have to change value of the property last_known_google_url to https://www.google.com/?hl=en& in Local State file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Local State). In that file, there should be the property: "browser": { "last_known_google_url": but it is not. Even if I add there the property, it has no impact on search - Google Chrome does not use the property and still searches in localized version. Another option is to put the property to Preferences file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Default/Preferences) - which works perfectly when I start Google Chrome and do some search - but just after that, the property (actually the whole Preferences file) is overriden, so "the most important" trailing part ?hl=en& of the property value is removed - and without it, the non-localized search does not work anymore. Why does Google Chrome ignore last_known_google_url property in Local State file?

  Read the article

• Why can't I bind to 127.0.0.1 on Mac OS X?

  - by Noah Lavine

  Hello, I'm trying to set up a simple web server on Mac OS X, and I keep getting an error when I run bind. Here's what I'm running (this transcript uses GNU Guile, but just as a convenient interface to posix). (define addr (inet-aton "127.0.0.1")) ; get internal representation of 127.0.0.1 (define sockaddr (make-socket-address AF_INET addr 8080)) ; make a struct sockaddr (define sock (socket PF_INET SOCK_STREAM 0)) ; make a socket (bind sock sockaddr) ; bind the socket to the address That gives me the error In procedure bind: can't assign requested address. So I tried it again allowing any address. (define anyaddr (make-socket-address AF_INET INADDR_ANY 8080)) ; allow any address (bind sock anyaddr) And that works fine. But it's weird, because ifconfig lo0 says lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 So the loopback device is assigned to 127.0.0.1. So my question is, why can't I bind to that address? Thanks. Update: the output of route get 127.0.0.1 is route to: localhost destination: localhost interface: lo0 flags: <UP,HOST,DONE,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 49152 49152 0 0 0 0 16384 0

  Read the article

• Why is 32-bit-mode required in IIS7.5 for my app?

  - by Jonas Lincoln

  I have a .net4 web application running in a 64 bits 2008 server. I can only get it to run when I set the app pool to Enable 32-bits application to true. All dlls are compiled for .net4 (verified with corflags.exe). How can I figure out why Enable 32-bit is required? The error message from the event log when starting as a 64-bit app-pool Event code: 3008 Event message: A configuration error has occurred. Event time: 2011-03-16 08:55:46 Event time (UTC): 2011-03-16 07:55:46 Event ID: 3c209480ff1c4495bede2e26924be46a Event sequence: 1 Event occurrence: 1 Event detail code: 0 Application information: Application domain: removed Trust level: Full Application Virtual Path: removed Application Path: removed Machine name: NMLABB-EXT01 Process information: Process ID: 4324 Process name: w3wp.exe Account name: removed Exception information: Exception type: ConfigurationErrorsException Exception message: Could not load file or assembly 'System.Data' or one of its dependencies. An attempt was made to load a program with an incorrect format. at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) at System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() at System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() at System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) at System.Web.Compilation.BuildManager.CallPreStartInitMethods() at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) Could not load file or assembly 'System.Data' or one of its dependencies. An attempt was made to load a program with an incorrect format. at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) Request information: Request URL: "our url" Request path: "url" User host address: ip-adddress User: Is authenticated: False Authentication Type: Thread account name: "app-pool" Thread information: Thread ID: 6 Thread account name: "app-pool" Is impersonating: False Stack trace: at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) at System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() at System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() at System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) at System.Web.Compilation.BuildManager.CallPreStartInitMethods() at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) Custom event details:

  Read the article

• Why does my exchange message filtering rule not work?

  - by Jon Cage

  I have two rules set up to sort incoming bug reports. The first is specific to a single device: Apply this rule after the message arrives sent to SMS Distribution and with <source_device_number>: in the body move it to the BugReports\<source_device_number> folder ..and the second is a catch-all for everything else: Apply this rule after the message arrives sent to SMS Distribution move it to the BugReports folder For some reason though, the first rule never seems to act even though it's higher in the list. So for some reason an email like the following doesn't seem to get caught by the first rule: From: <SourceDeviceUID> To: SMS Distributor Subject: Message from <SourceDeviceUID> Message: <source_device_number>: Device encountered a problem. Details below... ...where <source_device_number> is an integer. The second rule works fine. But for some high-priority devices, I want them automatically sorted. Why might that first rule fail?

  Read the article

• Why is this setting for Name-based Virtual Host settings not working?

  - by Kave

  I have two domains (siteA.com & SiteB.com) that point to the same webserver and I would like to show different web pages for each. The steps I have taken so far are: Copy the default site (siteA) to siteB 1) sudo cp /etc/apache2/sites-available/default /etc/apache2/sites-available/siteB 2) sudo vim /etc/apache2/sites-available/siteB <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/siteB <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/siteB> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo Indexes Order allow,deny allow from all </Directory> </VirtualHost *:80> Then I created under /var/www/siteB and created a sample index.html in there. However when I load my domain siteB.com I still get directed to /var/www/siteA. Why is that? Do I have to rename the /etc/apache2/sites-available/default to /etc/apache2/sites-available/siteA as well? UPDATE: Thanks to the answer below it seems I had forgotten next to enabling the site also another entry: <VirtualHost *:80> ServerAdmin [email protected] ServerName siteB.com ServerAlias www.siteB.com </VirtualHost *:80> in order to include all subdomains as well then do: <VirtualHost *:80> ServerAdmin [email protected] ServerName siteB.com ServerAlias *.siteB.com </VirtualHost *:80> Same goes for siteA.

  Read the article

• Why does Exchange 2003 silently reject emails with large attachments?

  - by Cypher

  Our environment: Exchange Server 2003 Standard, single instance, running on Windows Server 2003 Standard. configured to not send/receive mail with attachments larger than 10 MB. NDRs are not enabled. The issue: When an external sender sends an email with an attachment larger than 10MB, Exchange, as configured, does not receive the message. However, the sender of that message does not receive any notifications from his own mail server that the message could not be delivered due to attachment size. However, if an external user tries to send an email to a non-existent user, they do receive a message from their mail server indicating that the user does not exist. Why is that, and is there anything I can do about it? It would be nice if the sender received notification that the attachment file size exceeds our limits and their message was never received... Update The Exchange server has a SpamAssassin box in front of it... could that have something to do with it? Here is one of the last lines from SpamAssassin's logs when searching for my test e-mails: mail postfix/smtp[19133]: 2B80917758: to=, relay=10.0.0.8[10.0.0.8]:25, delay=4.3, delays=2.6/0/0/1.7, dsn=2.6.0, status=sent (250 2.6.0 Queued mail for delivery) My assumption is that Spam Assassin thinks the message is OK and is forwarding it off to Exchange. Update I've verified that Exchange is receiving the message and generating an NDR. However, delivery of NDRs are disabled to prevent Backscatter. Is there something that I can do to get Exchange to send a bounce message to the sending mail server (or verify that message is being sent) so the sending mail server can notify its sender of the bounce?

  Read the article

• Why does Windows XP (during a rename operation) report file already exists when it doesn't?

  - by Hawk

  From the command-line: E:\menu\html\tom\val\.svn\tmp\text-base>ver Microsoft Windows [Version 5.2.3790] E:\menu\html\tom\val\.svn\tmp\text-base>dir Volume in drive E is DATA Volume Serial Number is F047-F44B Directory of E:\menu\html\tom\val\.svn\tmp\text-base 12/23/2010 04:36 PM <DIR> . 12/23/2010 04:36 PM <DIR> .. 12/23/2010 04:01 PM 0 wtf.com3.csv.svn-base 1 File(s) 0 bytes 2 Dir(s) 170,780,262,400 bytes free E:\menu\html\tom\val\.svn\tmp\text-base>rename wtf.com3.csv.svn-base com3.csv.svn-base A duplicate file name exists, or the file cannot be found. E:\menu\html\tom\val\.svn\tmp\text-base>dir Volume in drive E is DATA Volume Serial Number is F047-F44B Directory of E:\menu\html\tom\val\.svn\tmp\text-base 12/23/2010 04:36 PM <DIR> . 12/23/2010 04:36 PM <DIR> .. 12/23/2010 04:01 PM 0 wtf.com3.csv.svn-base 1 File(s) 0 bytes 2 Dir(s) 170,753,064,960 bytes free E:\menu\html\tom\val\.svn\tmp\text-base>` I don't know what to do about this, as there is no other file in this directory. Why does Windows XP report that there is already a file here named com3.csv.svn-base when there is clearly no other file here?

  Read the article

• Why might my Fedora 15 live USB persistent storage not work?

  - by Richard J Foster

  I created a Fedora 15 "live" USB stick using the live USB creator found at https://fedorahosted.org/liveusb-creator/ and the Fedora 15 i686 Desktop ISO image with the persistent storage space set to 4096MB. (The USB stick I have available has an 8GB capacity, so there should be plenty of space.) Fedora appears to boot correctly, however it seems that the persistent storage is not working. To verify this, I opened a terminal prompt, then did su - followed by yum update yum. As expected, I was informed that a new version was available. (The live CD contains version 3.2.29-4, at the time of typing 3.2.29-6 is the current version). After installing, I verified that the new version was installed by typing yum --version. I then shutdown the system using shutdown now. After the system had shut down, I rebooted and returned to the terminal prompt. On typing yum --version, I was informed that the version was 3.2.29-4 (i.e. the original version). Why might the persistent storage not be working? Is there anything I can do to fix it?

  Read the article

• Why is writing to my external hard drive slow, while benchmarks show fast writing?

  - by matix2267

  I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

  Read the article

• Why is a SUBST'd drive inaccessible via shortcut or Run menu, but works fine from My Computer?

  - by Kev

  I have shortcuts to C:, D:, and E: in my quick launch bar. C and E work fine when I click on them, but D does nothing (that I can see) when I click on it. D and E are both SUBST'd drives pointing to folders that happen to be network shares. (I do this rather than mapping them so it doesn't have to go through the network layer--that way it works faster and I still get recycle bin functionality, etc.) If I go Start-Run and type D: or D:\, I get an error box saying This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel. If I go to My Computer and double-click the D drive, it comes up fine. Also, if I type \\servername\sharename pointing to the same place, it comes up fine. This just started happening this morning, out of the blue. It has been working fine ever since I set it up. Why might this be?

  Read the article

• Why does my PC successfully boot only when unplugged for more than a few minutes?

  - by philg

  I have an HP Pavilion Elite desktop computer, model HPE-490t. I like it because it didn’t cost too much, boots itself from an SSD, came with 16 GB of RAM, and has 6 CPU cores for editing video and camera RAW images. It has one behavioral quirk that I cannot explain, however. The recent power interruptions here in the Northeast got the machine into a state where it could not be restarted. It would power up for a second or two, shut down, and then power up again, never being able to get to the point of showing anything on the monitor. I unplugged it for about 10 seconds and plugged it back in. Same behavior (fails to boot). I unplugged it and walked away for an hour, then plugged it back in and it worked perfectly! I think something similar happened after installing a second hard disk drive into this machine. So the question is why does the computer behave differently depending on how long it has been unplugged? Where is energy stored that affects the machine’s ability to boot? Capacitors in the power supply? Battery on the motherboard (there is one for the clock, but that wouldn’t be exhausted by being unplugged for an hour, I don’t think)?

  Read the article

• Why isn't my phone charging with some micro usb cables?

  - by Jacxel

  I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

  Read the article

• Why do disk images hosted on a read-only HFS+ partition behave differently?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• Why is the `remove rows` button not always present in MySQL Workbench?

  - by Shawn

  I'm using MySQL Workbench to remove rows from a table in my database. Most of the time, I will simply write a select statement, then select the rows I want to erase and use the remove rows button (circled in the screenshot below). But sometimes (quite often actually), the remove rows button does not appear. Instead, I get something like the screenshot below: The remove rows button is not there and the remove rows option is grayed out in the context menu, so basically, I can't remove rows... The only way I've found of solving this issue is to run the select query many times until the button appears (it usually does after 3 of 4 times). Does anyone know why this is happening? UPDATE Today, I've been running a select query dozens of times and the button never appears. It seems my incomprehensible workaround no longer works... Help! btw: Using a delete statement does work, though I would rather not have to write one for each row I want to remove as this happens quite frequently during development...

  Read the article

• netkit: why cant my router 4 pc4 ping my router 1 pc1 - how can I solve this please?

  - by donok

  Below I have four routers connected but my pc1 on r1 cannot ping my pc4 on r4 and also my pc2 on r2 cant ping my pc4 on r4 and vice versa. Below is a network diagram: and the configurations are below that, could anyone help me please on making them accessible? ![connecting 4 routers][1] I cant post my diagram on serverfault(less than 10 rep) so I did on stackoverflow and asked the same question. pc1: ifconfig eth0 195.11.14.5 netmask 255.255.255.0 broadcast 195.11.14.255 up route add default gw 195.11.14.1 dev eth0 pc2.start: ifconfig eth0 200.1.1.7 netmask 255.255.255.0 broadcast 200.1.1.255 up route add default gw 200.1.1.1 dev eth0 pc3: ifconfig eth0 195.20.14.9 netmask 255.255.255.0 broadcast 195.20.1.255 up route add default gw 195.20.14.1 dev eth0 pc4: ifconfig eth0 200.2.1.11 netmask 255.255.255.0 broadcast 200.2.1.255 up route add default gw 200.2.1.1 dev eth0 r1: ifconfig eth0 195.11.14.1 netmask 255.255.255.0 broadcast 195.11.14.255 up ifconfig eth1 100.0.0.9 netmask 255.255.255.252 broadcast 100.0.0.11 up route add -net 200.1.1.0 netmask 255.255.255.0 gw 100.0.0.10 dev eth1 route add default gw 100.0.0.10 lab.conf: if you need more on that Ill post it up but I think most of the info is there. Any help would be greatly appreciated especially trying to make a connection between pc4 and pc1, even if you think it does not make sense please explain why. Thank you.

  Read the article

• DNS request times out then succeeds on my local network. Why?

  - by Dan

  I have a W2K3 Server that is the Domain Controller and also the DNS server. I wanted to make another DNS zone on my network called "something.local" and then make 'A' records to point requests like 'admin.something.local' and 'www.something.local' to machines on my network. I keep getting DNS timeouts but then after 2 tries it succeeds. Why would this happen? How can I troubleshoot? From my desktop I run: nslookup admin.something.local and get: Server: server.domain.com.au.local Address: 192.168.0.10 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. Name: admin.something.local Address: 192.168.0.191 If I go back the other way: nslookup 192.168.0.191 I get: Server: server.domain.com.au.local Address: 192.168.0.10 Name: admin.something.local Address: 192.168.0.191 My DNS server address is 192.168.0.10. The new DNS zone is not hooked up to active directory. I do not have much experience with DNS. Yesterday it was working fine. I have tried doing an 'ipconfig /flushdns' on both my desktop and the DNS server

  Read the article

• Why did I loose access to the mailboxes on my old web/mail host after changing to a new one but keeping old MX values

  - by LaserBeak

  So I changed the NS records with registrar to point at the new webhosts DNS servers and edited the SOA record there, deleting the new hosts default MX records and instead putting in the old ones for the old web\mail hosts. The website A record is however pointing at the new webhosts servers and the site comes up fine. But none of this should cause me to loose access to mailboxes on my old hosts mail server right? I log into the control panel on the old host, all the mailboxes are there, all the passwords are fine but I can't log in using either webmail or pop3, says incorrect log-in/password. I even created a new mailbox and password for it respectively, but it would not let me log in. For what its worth I did not change\delete the records for 'A' on the old webhost zone file, since I am not hosting the site with them anymore and NS records are pointing to other hosts DNS servers/zone file so that shouldn't matter right? The old hosts mailserver is also not simply down, I can tell because through the control panel I setup a mail forward for one of the existing inboxes and when sending mail to it, it receives it and forwards it fine. So from this I can deduce that I have correctly inputted the old hosts MX records into the zone file hosted on the new hosts DNS and the mail is being sent to the old hosts mail server(s) and is successfully forwarded by it. But why can't I log into those account/inboxes anymore ?

  Read the article

• Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >