Search Results

Search found 8731 results on 350 pages for 'l core'.

Page 222/350 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

  - by Tim

  I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

  Read the article

• Fix for poor hd playback for 11.04 upwards

  - by mark kirby

  Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

  Read the article

• How to recover broken dpkg after lucid-bleed ppa-purge?

  - by TryTryAgain

  Did a ppa-purge of lucid-bleed and dpkg didn't downgrade properly and now it is broken. dpkg: PreDepends: tar (>= 1.23) but 1.22-2ubuntu1 is to be installed What scares me is when simulating the removal of dpkg I get: Removing this package may render the system unusable. Are you sure you want to do that? and then the list of packages which depend on it, which will also be removed, is obviously very long. Is it safe for me to remove dpkg just to reinstall it? How would I ensure the list of packages which were also removed are then reinstalled? Will forcing the version of dpkg help? (FYI: simulating a forced version brings up a much smaller list of applications which will also be removed). Any other suggestions? Additional information based on comments: ppa-purge log: http://pastebin.com/1kT8cLvP If I sudo apt-get install dpkg=1.15.5.6ubuntu4.5 I get The following packages have unmet dependencies: libdpkg-perl: Depends: dpkg (= 1.15.8) but 1.15.5.6ubuntu4.5 is to be installed which sucks because that means more would be broken after doing so...but when I force the version through Synaptic I get: To be removed alien, build-essential, cdbs, checkinstall, debhelper, devscripts, dpkg-dev, google-earth-stable, googleearth-package, libdpkg-perl, lintian, lsb, lsb-core, lsb-cxx, lsb-desktop, lsb-graphics, lsb-languages, lsb-multimedia, lsb-printing, lsb-qt4, lsb-security, ubuntu-dev-tools.

  Read the article

• Designing web-based plugin systems correctly so they don't waste as many resources?

  - by Xeoncross

  Many CMS systems which rely on third parties for much of their code often build "plugin" or "hooks" systems to make it easy for developers to modify the codebase's actions without editing the core files. This usually means an Observer or Event design pattern. However, when you look at systems like wordpress you see that on every page they load some kind of bootstrap file from each of the plugin's folders to see if that plugin will need to run that request. Its this poor design that causes systems like wordpress to spend many extra MB's of memory loading and parsing unneeded items each page. Are there alternative ways to do this? I'm looking for ideas in building my own. For example, Is there a way to load all this once and then cache the results so that your system knows how to lazy-load plugins? In other words, the system loads a configuration file that specifies all the events that plugin wishes to tie into and then saves it for future requests? If that also performs poorly, then perhaps there is a special file-structure that could be used to make educated guesses about when certain plugins are unneeded to fullfil the request. Any ideas? If anyone wants an example of the "plugin" concept you can find one here.

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• ArchBeat Link-o-Rama for 2012-09-18

  - by Bob Rhubart

  Eye on Architecture This week the Oracle Technology Network Solution Architect Homepage features an Oracle Reference Architecture for Software Engineering, a new podcast focusing on why IT governance is important whether you like it or not, and information on the next free OTN Architect Day event. Enabling WebLogic Administrator Group Inside Custom ADF Application | Andrejus Baranovskis A short but informative technical post from Oracle ACE Director Andrejus Baranovkis. Oracle OpenWorld 2012 Hands-on Lab: Leading Your Everyday Application Integration Projects with Enterprise SOA Yet another session to squeeze into your already-jammed Oracle OpenWorld schedule. This hands-on lab focuses on how "Oracle Enterprise Repository, Oracle Application Integration Architecture (AIA) Foundation Pack, and Oracle SOA Suite work together to help you drive your enterprisewide integration projects." Mass Metadata Updates with Folders | Kyle Hatlestad "With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced," explains Fusion Middleware A-Team blogger Kyle Hatlestad. "This is meant to replace the folder architecture of 'Folders_g'. While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten." Creating your first OAM 11g R2 domain | Chris Johnson Prolific Fusion Middleware A-Team Blogger Chris Johnson reads the Oracle Identity and Access Management Installation Guide so you don't have to (though you probably should). Thought for the Day "Each pattern describes a problem which occurs over and over again in our environment, and then describes the core of the solution to that problem, in such a way that you can use this solution a million times over, without ever doing it the same way twice." — Christopher Alexander Source: SoftwareQuotes.com

  Read the article

• Oracle 'In Touch' PartnerCast (July 1, 2014) - Be prepared for a year of growth

  - by Hartmut Wiese

  Dear Partner, We would like to invite you to join David Callaghan, Senior Vice President Oracle EMEA Alliances and Channels, and his studio guests for the next broadcast of the Oracle ‘In Touch’ PartnerCast on Tuesday 1st July 2014 from 10:30am UK / 11:30am CET. In this cast, David’s studio guests and his regional reporters will be looking at your priorities as EMEA partners and how best to grow with Oracle. We also look forward to the broadcast covering topics on the following: Highlights of FY14 Strategic themes for FY15 HCM, CRM and ERP Oracle on Oracle Exclusive for ‘In Touch’ David Callaghan questions Rich Geraffo, Senior Vice President, Global Alliances & Channels, on how the FY15 partner Global kick off relates to EMEA. Plus David provides your chance to hear from some of the newly appointed Worldwide A&C Leadership team as he discusses with Bruce Chumley VP Oracle Channel Distribution Sales & Troy Richardson VP Oracle Strategic Alliances; their core focus and strategy of growth and what they intend on bringing to the table in their new role. With lots of studio guests joining David, why not get in touch on Twitter using the hashtag #OracleInTouch or by emailing [email protected] to get your questions featured in the cast!   To find out more information and to watch previous episodes on-demand, please visit our webpage here. Best regards, Oracle EMEA Alliances & Channels

  Read the article

• For a Javascript library, what is the best or standard way to support extensibility

  - by Michael Best

  Specifically, I want to support "plugins" that modify the behavior of parts of the library. I couldn't find much information on the web about this subject. But here are my ideas for how a library could be extensible. The library exports an object with both public and "protected" functions. A plugin can replace any of those functions, thus modifying the library's behavior. Advantages of this method are that it's simple and that the plugin's functions can have full access to the library's "protected" functions. Disadvantages are that the library may be harder to maintain with a larger set of exposed functions and it could be hard to debug if multiple plugins are involved (how to know which plugin modified which function?). The library provides an "add plugin" function that accepts an object with a specific interface. Internally, the library will use the plugin instead of it's own code if appropriate. With this method, the internals of the library can be rearranged more freely as long as it still supports the same plugin interface. This could also support having different plugin interfaces to modify different parts of the library. A disadvantage of this method is that the plugins may have to re-implement code that is already part of the library since the library's internal functions are not exported. The library provides a "set implementation" function that accepts an object inherited from a specific base object. The library's public API calls functions in the implementation object for any functionality that can be modified and the base implementation object includes the core functionality, with both external (to the API) and internal functions. A plugin creates a new implementation object, which inherits from the base object and replaces any functions it wants to modify. This combines advantages and disadvantages of both the other methods.

  Read the article

• Ubuntu 12.04LTS stuck at login mouse and keyboard not responding

  - by user169954

  I have Ubuntu 12.04LTS installed on a dual-booted machine (i5 dual core 8G ram) and it's been working fine, but today for some reason when I logged out and tried to log back in it is stuck at the login page, i.e. the mouse and the keyboard are not responding. The mouse is stuck at the top left corner of my screen, and I can do nothing but to turn the machine off. (I have been using logitech wireless mouse and keyboard.) I can not access the virtual console (Alt-F1 or Cntrl-Alt-F1) either! Here is what I have tried so far: Verified it is not a H/W problem since the mouse and keyboard work fine with windows7 Booted with ubuntu installation dvd and ran trial mode and mouse and keyboard worked fine. Tried bypassing the login screen by booting into recovery mode and editing tty1.conf, but to no avail. I moved .Xauthority .profile and .bashrc from my $HOME to another location so my login would proceed completely by system defaults. But this did not help From recovery mode commandline used to dpkg-reconfigure to switch between gdm and lightgdm. This did not help either. By the way, when in recovery mode as root from command line I mount the filesystem, all apps work fine. Python is Ok, octave is ok, vi is ok etc. I have a feeling if I could only bypass the login screen, and automatically get into the desktop, I will be ok. But I haven't been able to accomplish this either. I desperately need help please. Thank you in advance. Update: So I tried to switch to lightdm by dpkg-configure lightdm. This at least brings me up to the classical linux commandline login prompt but without a gui. Should I install startx? Should I install ubuntu-desktop?

  Read the article

• Creating, using and managing XML component dictionaries quick tutorials

  - by drrwebber

  XML Component Dictionary capabilities are provided in conjunction with the CAM Editor toolset.  These dictionaries accelerate the development of consistent XML information exchanges using standard sets of dictionary components. The quick tutorials are aimed at showing the 'how to' of the basic capabilities to jump start use of XML dictionaries with the CAM Editor. The collection of dictionary tutorials videos run for a total of approximately 20 minutes.  Each video can be reviewed individually also. Learn how to use the dictionary functions to create dictionaries by harvesting data model components from existing XSD schema, SQL database table schema, or simple Excel / Open Office spreadsheets with tables of components listed.Also included are tips and functions relating to use of NIEM exchange development, IEPD and EIEM techniques.These videos should be viewed in conjunction with reviewing the overall concepts and techniques described in the companion video on the CAM Editor and Dictionaries overview.  The approach is aligned with OASIS and Core Components Technical Specification (CCTS) standards specifications for XML components and dictionaries.Dictionary collections can be stored locally on the file system, or local network, or collaboratively on the web or cloud deployment, or can be shared and managed securely using the Oracle Enterprise Repository (OER) tool. Also included are techniques relating to the use of the NIEM approach for developing XML exchange schema and IEPD packages.  This includes generating reuse scores, wantlist, and cross reference spreadsheets. Included in the latest release of the CAM Editor is the ability to use the analyse dictionary tool to determine duplicate components, conflicting component definitions, missing component descriptions and so on.  This ensures high quality dictionary component specifications.  Using the CAM Editor you can also create MindMap models and UML physical models of your dictionary components sets. For a complete guide to using the CAM Editor see the main YouTube video tutorials website and the CAM Editor website.

  Read the article

• Google Analytics: How long does it take users to trigger an event

  - by Stephen Ostermiller

  I implemented Google Analytics event tracking on my currency conversion website. The typical user flow is: User lands on a page about two currencies. User enters an amount to be converted. The site shows the user the value in the other currency. The JavaScript sends Google Analytics an "converted" event when the currency conversion is done. Because most of the sessions on my site are single page, the event tracking is very important to me to be able to know if users find my page useful. I'm looking for a way to be able to figure out how long it typically takes users to enter a value in the form. I expect that this data would form a bell curve with around a specific amount of time after page load. If I can't get a graph, I could make do with a median value. I would like to be able to use this as a core metric around usability testing. Is there a way to get this information out of Google Analytics?

  Read the article

• CodePlex Daily Summary for Monday, October 14, 2013

  CodePlex Daily Summary for Monday, October 14, 2013Popular ReleasesAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Json.NET: Json.NET 5.0 Release 7: New feature - Added support for Immutable Collections New feature - Added WriteData and ReadData settings to DataExtensionAttribute New feature - Added reference and type name handling support to extension data New feature - Added default value and required support to constructor deserialization Change - Extension data is now written when serializing Fix - Added missing casts to JToken Fix - Fixed parsing large floating point numbers Fix - Fixed not parsing some ISO date ...Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...Coevery - Free ASP.NET CRM: Coevery_WebApp: it just for publish to microsoft web app gellaryWsus Package Publisher: Release v1.3.1310.12: Allow the Update Creation Wizard to be set in full screen mode. Fix a bug which prevent WPP to Reset Remote Sus Client ID. Change the behavior of links in the Update Detail Viewer. Left-Click to open, Right-Click to copy to the Clipboard.TerrariViewer: TerrariViewer v7 [Terraria Inventory Editor]: This is a complete overhaul but has the same core style. I hope you enjoy it. This version is compatible with 1.2.0.3 Please send issues to my Twitter or https://github.com/TJChap2840WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.BIDS Helper: BIDS Helper 1.6.4: This BIDS Helper release brings the following new features and fixes: New Features: A new Bus Matrix style report option when you run the Printer Friendly Dimension Usage report for an SSAS cube. The Biml engine is now fully in sync with the supported subset of Varigence Mist 3.4. This includes a large number of language enhancements, bugfixes, and project deployment support. Fixed Issues: Fixed Biml execution for project connections fixing a bug with Tabular Translations Editor not a...Free language translator and file converter: Free Language Translator 3.4: fixe for new version look up.MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1Dynamics AX 2012 R2 Kitting: First Beta release of Kitting: First Beta release of Kitting Install by using XPO or Models.C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...(Party) DJ Player: DJP.124.12: 124.12 (Feature implementation completed): Changed datatype of HistoryDateInfo from string to DateTime New: HistoryDateInfoConverter for the listbox Improved: HistoryDateInfoDeleter, HistoryDateInfoLoader, HistoryDateInfoAsynchronizer, HistoryItemLoader, HistoryItemsToHistoryDateInfoConverterSmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.New Projectsaigiongai: aigiongaiArtificial LIfe BEing - ALIBE: An Autonomous Arduino Robot based on a 4 wheel electric RC style vehicle equipped w/ various sensors and reactionary devices powered by Arduino Mega. BH Auto-injector: This ia a BH hack injector developed for r/SlashDiablo. For more information visit: http://www.reddit.com/r/slashdiablo BloxServer: A server for a game currently in DevBugNet Premium: BugNet Premium is extended version of open source defect tracking tool BugNetCASP Editor: CASP Editor hosted at SimlogicalGrace: Grace is an Dependency Injection Container as well as a couple other services like Data Transformation Service, Validation Service, and Reflection Service.Halogy v1.2 CE1.0: Halogy v1.2 Community Edition v1.0Hot Likes: Simple web Application Like Facebook and TwitterHyper-V Backup.NET: TestIndexedList: This library helps you to create lists with large amount of data and do high speed searches on your data. Kinect Skeleton Stream to BVH Converter: The program converts the skeleton data stream into BVH.Mama Goose's Birthday & Anniversary Calendar: This is a simple calendar that allows entering birthdays and anniversaries and to print the calendar for the year or month.MQL to FDK converter with migration toolkit: "MQL to FDK" project provides an easy and convenient way for conversion of MQL advisers to C# and launching them on FDK.Produzr: Produzr is a very simple CMS without a high learning curve.PSWFWeb - PowerShell Workflow WebConsole: A PSWorkflow job managersacm: naSave Cleaner: Sims 3 save cleanerSimple AES file appender: Simple AES file appenderSims 3 Package Viewer: Sims 3 ProjectsxBot Framework: xBot Framework is a dot Net framework for building a bot for use with Reddit.com.

  Read the article

• How can rotating release managers improve a project's velocity and stability?

  - by Yannis Rizos

  The Wikipedia article on Parrot VM includes this unreferenced claim: Core committers take turns producing releases in a revolving schedule, where no single committer is responsible for multiple releases in a row. This practice has improved the project's velocity and stability. Parrot's Release Manager role documentation doesn't offer any further insight into the process, and I couldn't find any reference for the claim. My first thoughts were that rotating release managers seems like a good idea, sharing the responsibility between as many people as possible, and having a certain degree of polyphony in releases. Is it, though? Rotating release managers has been proposed for Launchpad, and there were some interesting counterarguments: Release management is something that requires a good understanding of all parts of the code and the authority to make calls under pressure if issues come up during the release itself The less change we can have to the release process the better from an operational perspective Don't really want an engineer to have to learn all this stuff on the job as well as have other things to take care of (regular development responsibilities) Any change of timezones of the releases would need to be approved with the SAs and: I think this would be a great idea (mainly because of my lust for power), but I also think that there should be some way making sure that a release manager doesn't get overwhelmed if something disastrous happens during release week, maybe by have a deputy release manager at the same time (maybe just falling back to Francis or Kiko would be sufficient). The practice doesn't appear to be very common, and the counterarguments seem reasonalbe and convincing. I'm quite confused on how it would improve a project's velocity and stability, is there something I'm missing, or is this just a bad edit on the Wikipedia article? Worth noting that the top voted answer in the related "Is rotating the lead developer a good or bad idea?" question boldly notes: Don't rotate.

  Read the article

• Farseer tutorial for the absolute beginners

  - by Bil Simser

  This post is inspired (and somewhat a direct copy) of a couple of posts Emanuele Feronato wrote back in 2009 about Box2D (his tutorial was ActionScript 3 based for Box2D, this is C# XNA for the Farseer Physics Engine). Here’s what we’re building: What is Farseer The Farseer Physics Engine is a collision detection system with realistic physics responses to help you easily create simple hobby games or complex simulation systems. Farseer was built as a .NET version of Box2D (based on the Box2D.XNA port of Box2D). While the constructs and syntax has changed over the years, the principles remain the same. This tutorial will walk you through exactly what Emanuele create for Flash but we’ll be doing it using C#, XNA and the Windows Phone platform. The first step is to download the library from its home on CodePlex. If you have NuGet installed, you can install the library itself using the NuGet package that but we’ll also be using some code from the Samples source that can only be obtained by downloading the library. Once you download and unpacked the zip file into a folder and open the solution, this is what you will get: The Samples XNA WP7 project (and content) have all the demos for Farseer. There’s a wealth of info here and great examples to look at to learn. The Farseer Physics XNA WP7 project contains the core libraries that do all the work. DebugView XNA contains an XNA-ready class to let you view debug data and information in the game draw loop (which you can copy into your project or build the source and reference the assembly). The downloaded version has to be compiled as it’s only available in source format so you can do that now if you want (open the solution file and rebuild everything). If you’re using the NuGet package you can just install that. We only need the core library and we’ll be copying in some code from the samples later. Your first Farseer experiment Start Visual Studio and create a new project using the Windows Phone template can call it whatever you want. It’s time to edit Game1.cs 1 public class Game1 : Game 2 { 3 private readonly GraphicsDeviceManager _graphics; 4 private DebugViewXNA _debugView; 5 private Body _floor; 6 private SpriteBatch _spriteBatch; 7 private float _timer; 8 private World _world; 9 10 public Game1() 11 { 12 _graphics = new GraphicsDeviceManager(this) 13 { 14 PreferredBackBufferHeight = 800, 15 PreferredBackBufferWidth = 480, 16 IsFullScreen = true 17 }; 18 19 Content.RootDirectory = "Content"; 20 21 // Frame rate is 30 fps by default for Windows Phone. 22 TargetElapsedTime = TimeSpan.FromTicks(333333); 23 24 // Extend battery life under lock. 25 InactiveSleepTime = TimeSpan.FromSeconds(1); 26 } 27 28 protected override void LoadContent() 29 { 30 // Create a new SpriteBatch, which can be used to draw textures. 31 _spriteBatch = new SpriteBatch(_graphics.GraphicsDevice); 32 33 // Load our font (DebugViewXNA needs it for the DebugPanel) 34 Content.Load<SpriteFont>("font"); 35 36 // Create our World with a gravity of 10 vertical units 37 if (_world == null) 38 { 39 _world = new World(Vector2.UnitY*10); 40 } 41 else 42 { 43 _world.Clear(); 44 } 45 46 if (_debugView == null) 47 { 48 _debugView = new DebugViewXNA(_world); 49 50 // default is shape, controller, joints 51 // we just want shapes to display 52 _debugView.RemoveFlags(DebugViewFlags.Controllers); 53 _debugView.RemoveFlags(DebugViewFlags.Joint); 54 55 _debugView.LoadContent(GraphicsDevice, Content); 56 } 57 58 // Create and position our floor 59 _floor = BodyFactory.CreateRectangle( 60 _world, 61 ConvertUnits.ToSimUnits(480), 62 ConvertUnits.ToSimUnits(50), 63 10f); 64 _floor.Position = ConvertUnits.ToSimUnits(240, 775); 65 _floor.IsStatic = true; 66 _floor.Restitution = 0.2f; 67 _floor.Friction = 0.2f; 68 } 69 70 protected override void Update(GameTime gameTime) 71 { 72 // Allows the game to exit 73 if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) 74 Exit(); 75 76 // Create a random box every second 77 _timer += (float) gameTime.ElapsedGameTime.TotalSeconds; 78 if (_timer >= 1.0f) 79 { 80 // Reset our timer 81 _timer = 0f; 82 83 // Determine a random size for each box 84 var random = new Random(); 85 var width = random.Next(20, 100); 86 var height = random.Next(20, 100); 87 88 // Create it and store the size in the user data 89 var box = BodyFactory.CreateRectangle( 90 _world, 91 ConvertUnits.ToSimUnits(width), 92 ConvertUnits.ToSimUnits(height), 93 10f, 94 new Point(width, height)); 95 96 box.BodyType = BodyType.Dynamic; 97 box.Restitution = 0.2f; 98 box.Friction = 0.2f; 99 100 // Randomly pick a location along the top to drop it from 101 box.Position = ConvertUnits.ToSimUnits(random.Next(50, 400), 0); 102 } 103 104 // Advance all the elements in the world 105 _world.Step(Math.Min((float) gameTime.ElapsedGameTime.TotalMilliseconds*0.001f, (1f/30f))); 106 107 // Clean up any boxes that have fallen offscreen 108 foreach (var box in from box in _world.BodyList 109 let pos = ConvertUnits.ToDisplayUnits(box.Position) 110 where pos.Y > _graphics.GraphicsDevice.Viewport.Height 111 select box) 112 { 113 _world.RemoveBody(box); 114 } 115 116 base.Update(gameTime); 117 } 118 119 protected override void Draw(GameTime gameTime) 120 { 121 GraphicsDevice.Clear(Color.FromNonPremultiplied(51, 51, 51, 255)); 122 123 _spriteBatch.Begin(); 124 125 var projection = Matrix.CreateOrthographicOffCenter( 126 0f, 127 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Width), 128 ConvertUnits.ToSimUnits(_graphics.GraphicsDevice.Viewport.Height), 0f, 0f, 129 1f); 130 _debugView.RenderDebugData(ref projection); 131 132 _spriteBatch.End(); 133 134 base.Draw(gameTime); 135 } 136 } 137 Lines 4: Declare the debug view we’ll use for rendering (more on that later). Lines 8: Declare _world variable of type class World. World is the main object to interact with the Farseer engine. It stores all the joints and bodies, and is responsible for stepping through the simulation. Lines 12-17: Create the graphics device we’ll be rendering on. This is an XNA component and we’re just setting it to be the same size as the phone and toggling it to be full screen (no system tray). Lines 34: We create a SpriteFont here by adding it to the project. It’s called “font” because that’s what the DebugView uses but you can name it whatever you want (and if you’re not using DebugView for your production app you might have several fonts). Lines 37-44: We create the physics environment that Farseer uses to contain all the objects by specifying it here. We’re using Vector2.UnitY*10 to represent the gravity to be used in the environment. In other words, 10 units going in a downward motion. Lines 46-56: We create the DebugViewXNA here. This is copied from the […] from the code you downloaded and provides the ability to render all entities onto the screen. In a production release you’ll be doing the rendering yourself of each object but we cheat a bit for the demo and let the DebugView do it for us. The other thing it can provide is to render out a panel of debugging information while the simulation is going on. This is useful in tracking down objects, figuring out how something works, or just keeping track of what’s in the engine. Lines 49-67: Here we create a rigid body (Farseer only supports rigid bodies) to represent the floor that we’ll drop objects onto. We create it by using one of the Farseer factories and specifying the width and height. The ConvertUnits class is copied from the samples code as-is and lets us toggle between display units (pixels) and simulation units (usually metres). We’re creating a floor that’s 480 pixels wide and 50 pixels high (converting them to SimUnits for the engine to understand). We also position it near the bottom of the screen. Values are in metres and when specifying values they refer to the centre of the body object. Lines 77-78: The game Update method fires 30 times a second, too fast to be creating objects this quickly. So we use a variable to track the elapsed seconds since the last update, accumulate that value, then create a new box to drop when 1 second has passed. Lines 89-94: We create a box the same way we created our floor (coming up with a random width and height for the box). Lines 96-101: We set the box to be Dynamic (rather than Static like the floor object) and position it somewhere along the top of the screen. And now you created the world. Gravity does the rest and the boxes fall to the ground. Here’s the result: Farseer Physics Engine Demo using XNA Lines 105: We must update the world at every frame. We do this with the Step method which takes in the time interval. [more] Lines 108-114: Body objects are added to the world but never automatically removed (because Farseer doesn’t know about the display world, it has no idea if an item is on the screen or not). Here we just loop through all the entities and anything that’s dropped off the screen (below the bottom) gets removed from the World. This keeps our entity count down (the simulation never has more than 30 or 40 objects in the world no matter how long you run it for). Too many entities and the app will grind to a halt. Lines 125-130: Farseer knows nothing about the UI so that’s entirely up to you as to how to draw things. Farseer is just tracking the objects and moving them around using the physics engine and it’s rules. You’ll still use XNA to draw items (using the SpriteBatch.Draw method) so you can load up your usual textures and draw items and pirates and dancing zombies all over the screen. Instead in this demo we’re going to cheat a little. In the sample code for Farseer you can download there’s a project called DebugView XNA. This project contains the DebugViewXNA class which just handles iterating through all the bodies in the world and drawing the shapes. So we call the RenderDebugData method here of that class to draw everything correctly. In the case of this demo, we just want to draw Shapes so take a look at the source code for the DebugViewXNA class as to how it extracts all the vertices for the shapes created (in this case simple boxes) and draws them. You’ll learn a *lot* about how Farseer works just by looking at this class. That’s it, that’s all. Simple huh? Hope you enjoy the code and library. Physics is hard and requires some math skills to really grok. The Farseer Physics Engine makes it pretty easy to get up and running and start building games. In future posts we’ll get more in-depth with things you can do with the engine so this is just the beginning. Enjoy!

  Read the article

• xorg-edgers PPA with llvmpipe breaks AMD APU system

  - by linux_RRT

  I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

  Read the article

• How do you convince the client their application's backend needs a rewrite?

  - by Richard DesLonde

  I have been supporting a LOB winforms application for a client the last 3 years. The application is built with a simple monolithic architecture and uses .NET 2.0. The application is a core part of their operations and its longevity is paramount. It needs to evolve with their evolving business processes, as well as implement improved functionality etc....this brings me to believe that this application needs an overhaul of sorts on the back-end. The problem is changing a back-end is "invisible"...i.e. the user never actually sees it. It's a quality of the system that is changing (stability, maintainability, reliability, longevity), not some functional requirement that will be easily seen...i.e. the ROI is not obvious. There is a lot of new functionality to be added to the front-end as well (user experience). I am considering a strategy of changing the back-end over time...i.e. when making a change or adding a feature to the front-end, change those components in the back-end that are affected, eventually you get to everything. How do I convince the client that we need to rebuild the back-end?

  Read the article

• cpu use goes to 100% when I lock the screen

  - by gianni

  Whenever I lock the screen, after a certain amount of time, the cpu and the cpu fan use go up near the limit, and it returns back to normal the moment I unlock the screen again (as shown by psensor). How can I find out what process is responsible for this? I've tried with "top -S", and the result is this... PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2114 me 20 0 326m 104m 40m R 16 2.6 66:50.03 compiz 1234 root 20 0 396m 152m 98m R 6 3.8 20:23.88 Xorg 2204 me 20 0 160m 38m 30m S 4 1.0 0:33.35 yakuake 2446 me 20 0 206m 18m 12m S 4 0.5 6:32.18 psensor 2280 me 20 0 220m 18m 10m S 2 0.5 5:01.60 unity-panel 9138 me 20 0 154m 27m 15m S 2 0.7 0:03.63 plugin-cont 2282 me 20 0 65800 5272 3316 S 1 0.1 4:36.90 hud-service 2143 me 20 0 140m 11m 8352 S 1 0.3 2:50.16 indicator-m 9095 me 20 0 720m 253m 36m S 1 6.4 0:26.34 firefox 2076 me 20 0 7168 3484 828 S 1 0.1 1:46.53 dbus-daemon 2307 me 20 0 55000 5132 3632 S 1 0.1 2:01.55 indicator-a 2557 me 20 0 86328 6028 4576 S 0 0.1 1:44.71 conky 6290 me 20 0 2836 1296 964 R 0 0.0 0:29.64 top 6291 me 20 0 2836 1188 884 S 0 0.0 0:29.49 top 1 root 20 0 3644 1984 1284 S 0 0.0 60:57.76 init specs: ubuntu 12.04 fresh install intel core i5 4gB ram

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

  - by user97591

  I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

  Read the article

• How to deal with OpenGL and Fullscreen on OS X

  - by Armin Ronacher

  I do most of my development on OS X and for my current game project this is my target environment. However when I play games I play on Windows. As a windows gamer I am used to Alt+Tab switching from within the game to the last application that was open. On OS X I currently can't find either a game that supports that nor can I find a way to make it possible. My current project is based on SDL 1.3 and I can see that cmd+tab is a sequence that is sent directly to my application and not intercepted by the operating system. Now my first attempt was to hide the rendering window on cmd+tab which certainly works, but has the disadvantage that a hidden OpenGL window in SDL cannot be restored when the user tabs back to the application. First of all, there is no event fired for that or I can't find it, secondly the core problem is that when that application window is hidden, my game is still the active application, just that the window disappeared. That is incredible annoying. Any ideas how to approximate the windows / linux behavior for alt+tab?

  Read the article

• How to run multiple distros using lvm

  - by Mark

  I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

  Read the article

• Ubuntu 12.04 64 bit "unable to find medium with live filesystem" AFTER normal install

  - by user88710

  So, I got a new computer (64 bit quad core yada yada). pulled my Ubuntu SSD drive from old machine, installed it into new machine. (my intention here is to have Ubuntu installed on the 120G SSD, Win7 on the main drive) downloaded 64 bit Ubuntu, burned it to a disk. rebooted with Live CD, installed Ubuntu to the SSD drive, had no problems rebooted again, got the grub menu, selected Ubuntu after a minute i got this - "unable to find medium with live filesystem" booting into windows, explorer doesnt even see the SSD. Device manager sees it though. I assume this is because its formatted with ext4. so, The liveCD saw the SSD just fine, installed fine, but when i try to boot ubuntu, i get the error above, heeellllpppp! UPDATE: small update. Windows did a software update that apparently wiped out my grub, so I guess grub was installed on the main drive. I reinstalled Ubuntu (again) on the SSD drive but, still no joy with booting from it. same error message as above.

  Read the article

• USB Ports In Wrong Mode, How To Use usbmodeswitch?

  - by user86872

  I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

  Read the article

• Making money from a custom built interpreter?

  - by annoying_squid

  I have been making considerable progress lately on building an interpreter. I am building it from NASM assembly code (for the core engine) and C (cl.exe the Microsoft compiler for the parser). I really don't have a lot of time but I have a lot of good ideas on how to build this so it appeals to a certain niche market. I'd love to finish this but I need to face reality here ... unless I can make some good monetary return on my investment, there is not a lot of time for me to invest. So I ask the following questions to anyone out there, especially those who have experience in monetizing their programs: 1) How easy is it for a programmer to make good money from one design? (I know this is vague but it will be interesting to hear from those who have experience or know of others' experiences). 2) What are the biggest obstacles to making money from a programming design? 3) For the parser, I am using the Microsoft compiler (no IDE) I got from visual express, so will this be an issue? Will I have to pay royalties or a license fee? 4) As far as I know NASM is a 2-clause BSD licensed application. So this should allow me to use NASM for commericial development unless I am missing something? It's good to know these things before launching into the meat and potatoes of the project.

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >