Search Results

Search found 8570 results on 343 pages for 'power saving'.

Page 222/343 | < Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

• DataMapper save fails but with no errors

  - by Justin Bozonier

  When I try to modify and then save a model using DataMapper I get a SaveFailure exception but no errors. Specifically I see this message: "MonthlyBill#save returned false, MonthlyBill was not saved" This is the code doing the saving: post '/monthly_bills' do with_authenticated_user do |user| description = params[:description] expected_amount = params[:expected_amount] pay_period = params[:pay_period] monthly_bill = MonthlyBill.new(:description=>description, :expected_amount=>expected_amount, :pay_period=>pay_period) user.MonthlyBills << monthly_bill user.save end The User model: class User include DataMapper::Resource property :id, Serial property :email_address, String property :password, String has n, :MonthlyBills has 1, :CurrentPayPeriod end The MonthlyBill model: class MonthlyBill include DataMapper::Resource property :id, Serial property :description, String property :expected_amount,Decimal property :pay_period, Integer belongs_to :user end What is the issue and, more importantly, how can I get DataMapper to tell me more specifically what is wrong?

  Read the article

• How do I use an enum with custom values for a Sharepoint Web part?

  - by Jeff

  I'm trying to design a Web Part that has a drop-down list for the user to choose from. Eventually, these values will be automatically generated based on some kind of outside data source, so they're going to have somewhat arbitrary numeric values associated with them. This is the code I have now: public enum filterChoice { All=0, BOCC=12, Sustainability=15, Clerk=4, DA=13, Emergency=7, Highlights=3, POS=6, PR=1, PH=5, SHPR=2, Test=8, Transportation=14, Volunteer=16 }; These are different categories I want the user to choose from. When I choose one and save the settings for my Web Part, Sharepoint is only saving the values in numeric order; that is, All=0, BOCC=1, Sustainability=3 [...] so my Web Part then thinks the user chose the value with the corresponding number (PR when they chose BOCC, Highlights when they chose Sustainability, etc.) How can I make Sharepoint honor my custom values?

  Read the article

• 2x ATI FireMV 2250 not working

  - by Brett Rigby

  I've just bought 2x ATI FireMV 2250 cards from a reputable seller on ebay... one is a PCI-E x1 and the other is a PCI-E x16. Problem is, neither works in my Dell Vostro 220 PC... Both cards appear to not work. Is there something I'm missing? The seller used an anti-static bag for one of the cards, syaing that: "You Must connect this graphics board to the computer's power supply" but there's no socket for that, nor any indication. I have contacted the seller, but thought I'd raise it here, as it seems strange that two cards can be non-functioning.

  Read the article

• How to resize pdf graphics produced in R using Illustrator

  - by user1648516

  I am making plots in R using the pdf() command. Graphs look perfect and resize nicely in Acrobat Reader. My usual workflow includes manipulating labels etc. in Illustrator, saving as .eps for submission to publishers or inserting in Word. All works fine for single graphs. Now I am trying to combine 4 graphs into one by manually putting them together in an A4 Illustrator document. However, when I resize the standard 7x7 inches pdf graph in Illustrator to fit in one column of an A4 page (ca 3.4 inches wide), all proportions get screwed up, e.g. lines and symbols outlines become way too thick. Using pdf(..., width=3.4, height=3.4) in R messes up all the symbol and font sizes so carefully chosen to produce the original graph. Why can't I resize the graph within Illustrator the same way I can resize the pdf e.g. in Acrobat Reader?

  Read the article

• Missing files when Windows 7 returns from hibernate w/ dual boot

  - by Arthur N

  I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

  Read the article

• Trying to perform a series of actions on page unload, but the pages unloads too fast to finish them.

  - by user138821

  I have a series of actions I want to perform on page unload. Namely if a user is editing an input field, and they refresh or close browser or leave page, I want to save the contents of the field. The actions don't include an AJAX call, so I can't just make it synchronous. It's actually saving to local storage, but the page unloads before the storage can take place. The code is correct, if I add an alert to the actions, the delay allows the rest of the code to finish before it even displays. Any ideas? Thanks!

  Read the article

• Can't add libraries to Eclipse Android project

  - by neuromancer

  I'm trying to get the Hackbook for Android project to work in Eclipse. One of the things I need to do is remove that invalid reference and include that project I made. I did this before, but then I started over and now it doesn't work. Here is where I add the project. If I click "Apply" and then "OK" everything seems to be fine, but it isn't, because when I go back to this screen, none of the changes I made are there. Why isn't it saving my changes? How am I supposed to do this?

  Read the article

• HP Presario CQ 61-322ER (VV884EA) Wi-Fi hang up!

  - by qgrabber

  I have my new laptop and don't have Windows XP drivers for it. I found that it contains the Broadcom BCM4310 chip, but when I install any Broadcom driver my laptop hangup on installing bcm5*.sys driver. Only power-off button make any effect. After reboot the device list (Device Manager) contains Broadcom WLAN adapter, but it is marked as disabled, for some hardware errror! Also if I disable device before, and install driver - then - all is OK! But when I try to enable it, Windows hang up anyway (no speaker beep, no mouse input, no keyboard input - nothing) What is the solution?

  Read the article

• Exchange 2007 OWA not listening on SSL port

  - by krs1

  I have an Exchange 2007 server that went down after a power failure. It has OWA access via SSL both externally and internally. OWA is working fine from the internal notwork, however I am getting a timeout when I attempt to connect externally. I pulled up wireshark and noticed that the server actually redirects to SSL. For some reason the server is not listening on the SSL port, and this seems to be causing the timeout. I normally do only development work, but I'm stuck with this since my sysadmin took off for the week and isn't answering my phone calls. As far as I know it shouldn't be a firewall issue. Aside from me not wanting to work on the damn thing, what should I look for?

  Read the article

• Which browser is the most secure? (research and practically based)

  - by wag2639

  I was wondering which browser is the most secure today, Firefox, Internet Explorer, Chrome, or Safari on a Windows machine with the user running as a Power User/Administrator account. This is not a question about which browser is the best because its the most usable, but more of a question if asked for security, which browser is the most secure given an everyday user's experience (JavaScript, Flash, Ads, etc). Also, would the choice for most secure change if the user was running as a restricted user? To clarify, I'm looking for an answer that's based in research on potential and common exploits and how long it takes for critical problems to be patched.

  Read the article

• Stream computer screen to TV via network instead of a USB wireless link

  - by user24559

  I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

  Read the article

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• Why Flash can't be rendered in a Windows Service?

  - by Leonid

  I'm trying to solve a similar problem as was described here - to create a Windows Service for taking snapshots of rich webpages (html+js+flash) and saving them to a PDF file. The bundle Firefox+cmdlnprint did the trick for me. I wrote a simple program running as a service that invokes Firefox to make a PDF. All seems well, the PDF gets created, but Flash is completely missing. Although, when started not as a service, Flash renders just fine. Can anyone shed a light on what blocks Flash from rendering and if there's a workaround? thanks!

  Read the article

• Minimized window position in WPF

  - by DrLazer

  I am trying to save the position of a custom dialog to the users registry, so that when they reload the same dialog, it appears in the same place they moved or resized it to previously. I am saving the windows X position Y position Width and Height. It all works fine except for when the dialog is minimized. If the dialog is minimized and the user right clicks the dialogs representation on the taskbar (windows 7) they can click "close this window". Strangely, the number -32030 gets saved in the registry as the X and Y positions but the width and height get saved correctly. Any idea where this number comes from and what to do in this situation thx

  Read the article

• Magento product name

  - by Kudja

  I wish to change product name when someone adding this product to cart. All product are simple. Magento v. 1.7.0.0 If I try to change it's name in Mage_Checkout_Model_Cart - addProduct method in that way for example: if ($request->getMyParam()) { $product->setName($product->getName() . ' (' . $request->getMyParam() . ')'); } than I have message that I added product with MyParam but in cart really I have simple product name from catalog The same thing happent when I trying to do same thing in Mage_Sales_Model_Quote - addProductAdvanced method So where I must change this name to save this name in cart and then in order details too. Or maybe I can create some additional custom options on he fly when I adding to cart or saving product. Thnx for all who can help with this

  Read the article

• Windows 7 startup problem

  - by elaine

  I purchased a computer a few weeks ago which runs on Windows 7. I was just watching a show on Hulu when it shut off. I don't know if I accidently pushed the power button with the keyboard or what. When I turned it back on my first screen says F5 key for HDD recovery. I pressed the F5 button and the screen goes to a Windows setup (EMS enabled) screen which then goes to my regular Starting Windows. After that one I get the box with x:/windows/system32/cmd.exe-startnent.cmd. If I don't press the F5 button I go to a screen which tells me Windows failed to start, a recent hardware or software change might be the cause. It gives me two options- Launch Setup REpair(recommended) or start Windows normally. I've pressed enter to choose the first choice but it does nothing but brings me to the same screen. Anyone have any ideas?

  Read the article

• Remotely enter encryption key?

  - by Jason Swett

  This might be a really dumb question but here goes, anyway. I just bought a couple servers. I already installed Ubuntu with encrypted LVM on one and I'm planning on doing the same with the other. This means that every time I boot up each of these machines, I have to enter the passphrase. And I'll have to do this every morning because I'll power each machine off each night for security reasons. Here's the problem: I don't have monitors or keyboards for these servers. It seems to me I have two options: Somehow enter the passphrase remotely Buy a KVM switch I doubt #1 is an option but I want to make sure it's not before I buy a KVM. Is it possible to enter the passphrase remotely? AND is it a good idea?

  Read the article

• What is the best way to shutdown hard disk?

  - by Sunil

  Right Now I'm using hdparm command in unix to shut down the hard disk but there are few issues with it. when it wakes back up it consumes lots power. Is there any other way to do it? Many times when I put my hard disk to sleep, I can see few bursts at the beginning and then after a while it goes to sleep. I think its because of the journaling system in ubuntu (which I use) Have anybody encountered that? What would be the best linux/unix operating system (eg: ubuntu/centos/redhat) to work on extensive hard disk operations? I would highly appreciate if you could share the problems you encountered while doing this operation.

  Read the article

• New Vaio laptop, performing a fresh install

  - by Slace

  I just purchased a new Sony Vaio laptop (z-series) but being a bit of a power user I really want to get rid of the software which is installed on it. I can go through the Programs and Features and manually select each item I want to get rid of, but it's a really tedious process. I'd much prefer to have a clean Windows install which I can then tweak from the get go. But it doesn't appear that I received a Windows 7 install disc (I bought it through a large reseller so it isn't dodgy as far as I know). I do have the Windows 7 licence key on my laptop underside, will this be valid if I use a Windows 7 install disc from work? Or should I have the Windows 7 disk and I need to go back to the reseller?

  Read the article

• Sony Vaio laptop hangs up on boot

  - by Kole

  When I power on the laptop it displays the "Vaio" logo and the screen after show, but after that the screen is completely blank but the backlight is lit. Nothing progresses from here. When trying to press f8 to boot into safe mode, nothing happens, black screen again. I created a windows 7 32bit install disk (I had the same OS on it before) to repair or even format my pc. I boot from the disk and it loads all the files and gets to the "Windows is starting" screen but after that it always hangs up on a blank screen with a mouse cursor. Is there any fix to this whatsoever?

  Read the article

• Is there a way to watch EyeTV in alarm-clock style "sleep" mode on your iMac?

  - by Mark S.

  My wife likes to watch TV to go to sleep, the only trouble is that the only TV we have in our house is the iMac with the EyeTV Hybrid. I'd like to have the TV turn off after 1.5 hours of watching without changing the channels/volume--sortof like an alarm clock 'sleep' function. Do you know of a way to do this either with an EyeTV plugin or an App that might be able to try to detect such conditions and shut down the display? Right now EyeTV overrides the screensaver. The Power saver functions don't really work because she doesn't start watching at the same time every night and periodically she will want to record a 2 or 3 AM show. All I want to do is "close" (but not quit) EyeTV and shut off the display.

  Read the article

• Is GPU active when there are not any monitors?

  - by Mixer

  Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

< Previous Page | 218 219 220 221 222 223 224 225 226 227 228 229  | Next Page >