Search Results

Search found 13404 results on 537 pages for 'george host'.

Page 223/537 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

  • In spite of correct DNS, Exchange sending to wrong destination server for single outbound domain

    - by beporter
    My company uses an SBS 2003 server and makes use of Exchange to host our own email. We also have a linux server hosting domains for some of our clients. In order for us to send to those clients, we had internal DNS set up to shadow the client domains to provide "correct" MX records inside our network. For example, public DNS for a domain abc.com might point to 1.2.3.4, but internally we have MX records set up to route mail for abc.com to 172.16.0.4, which is the linux email server. This setup was entirely functional; this is just back story. We've recently moved one of our client domains from our internal linux server to an external email provider. When we did that, we naturally deleted our internal shadow DNS records so our Exchange server would fetch correct (public) DNS records and route mail out to the new external host. This has NOT had any effect on Exchange though. Even after rebooting the Exchange server and completely flushing the DNS cache (nslookups on the Exchange machine itself correctly resolve to the new external address) Exchange still attempts to deliver messages for the domain to our internal server! Exchange correctly routes to all other internal and external domains when sending email. Somehow Exchange is trying to deliver to a machine that by all accounts it has no business trying to use for just this one domain. Is there a DNS cache that Exchange uses internally? Is there a way to flush that internal cache? What else could I be missing?

    Read the article

  • How to get nginx to pass HTTP_AUTHORIZATION header to Apache

    - by codeinthehole
    Am using Nginx as a reverse proxy to an Apache server that uses HTTP Auth. For some reason, I can't get the HTTP_AUTHORIZATION header through to Apache, it seems to get filtered out by Nginx. Hence, no requests can authenticate. Note that the Basic auth is dynamic so I don't want to hard-code it in my nginx config. My nginx config is: server { listen 80; server_name example.co.uk ; access_log /var/log/nginx/access.cdk-dev.tangentlabs.co.uk.log; gzip on; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_read_timeout 120; location / { proxy_pass http://localhost:81/; } location ~* \.(jpg|png|gif|jpeg|js|css|mp3|wav|swf|mov|doc|xls|ppt|docx|pptx|xlsx|swf)$ { if (!-f $request_filename) { break; proxy_pass http://localhost:81; } root /var/www/example; } } Anyone know why this is happening? Update - turns out the problem was something I had overlooked in my original question: mod_wsgi. The site in question here is a Django site, and it turns out that Apache does get the auth variables passed through, however mod_wsgi filters them out. The resolution is to use: WSGIPassAuthorization On See http://www.arnebrodowski.de/blog/508-Django,-mod_wsgi-and-HTTP-Authentication.html for more details

    Read the article

  • Why Ubuntu could treat hosts file so strange?

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • bond0 and xen = crash

    - by Rajat
    Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

    Read the article

  • Why can't I route to some sites from my MacBook Pro that I can see from my iPad? [closed]

    - by Robert Atkins
    I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

    Read the article

  • Transparent proxying in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

    - by apenwarr
    I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

    Read the article

  • Pair programming with tmux and Vagrant

    - by neezer
    Does anyone have a clear step-by-step guide for setting up a shared tmux session on a Vagrant vbox that my coworkers (on our local office lan) could SSH into? The articles I've found online only seem to cover setting this up from machine to machine (no virtualbox setups), and I'm not very good at networking, so I haven't been able to extrapolate a solution... We're all running the latest Macs in our office, btw. Here's one article I've found but haven't been able to get working with Vagrant: http://blog.voxdolo.me/remote-pairing-with-vim-and-tmux.html EDIT: To clarify, I don't really know how I should be setting up Vagrant to allow me to SSH into it from a machine outside the one hosting the VM. The article above suggests that I add the tunnels host on my physical machine running the VM (here-on referred to as the MBP), so I did that. Next is the ProxyCommand host declaration, which I have also assumed should live on the MBP. So next I try SSHing into the MBP from a guest machine (another separate physical machine on my network), and that seems to work... but that only gets me into the MBP, not the Vagrant image running on the MBP. I normally login Vagrant image on the MBP via vagrant ssh (per the docs), and I know how to forward ports on the Vagrant VM to the MBP, but it's unclear to me how I could forward ports/SSH from the MBP to the Vagrant VM, which I assume I would need to do so that my guest machine could SSH in--through the MBP--to my Vagrant image. That, in a nutshell, is what I'm trying to accomplish. I do my development work in Vagrant VMs which keeps my MBP nice and clean of any dev-related cruft and also keeps my dev environments totally isolated from one another, yet I would like to start pair-programming with my coworkers via tmux, thus the reason why I've asked this question. I would like to accomplish all of this without setting up an additional user account on the MBP, or giving my coworkers access to my local user account on the MBP to get to my Vagrant VM, if that's at all possible.

    Read the article

  • ssh without password does not work for some users

    - by joshxdr
    I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

    Read the article

  • Joomla SMTP Configuration Issue

    - by msargenttrue
    I'm having an issue with the SMTP setup of my Joomla website when trying to send mass emails through the CB Mailing (Mass Email) extension. I receive this error: SMTP Error! The following recipients failed: Number of users to whom e-mail was sent: 0 (Total in list: 1) The old version of this websites mass emailer worked fine, however, in order to add Kunena Forum and maintain compatibility I had to make several upgrades to the site. Both the new version and old verson configurations are outlined below. Server for Website: Mac OS X Server 10.4.11, Apache 1.3.4.1, PHP 5.2.3, MySQL 4.1.22 Server for SMTP: Eudora Internet Mail Server 3.3.9 (EIMS Server X) New Configuration: Joomla 1.5.25, Community Builder 1.7.1, CB Paid Subscriptions (CB Subs) 1.2.2, CBMailing 2.3.4, Kunena Forum 1.7.0, Legacy 1.0 plug-in disabled Mail Settings (New Config): Mailer: SMTP Server Mail from: [email protected] From Name: CASPA Sendmail Path: /usr/sbin/sendmail SMTP Authentication: Yes SMTP Security: None SMTP Port: 25 SMTP Username: [email protected] SMTP Password: xxxxxxx SMTP Host: 209.48.40.194 Old Configuration (Working SMTP Configuration): Joomla 1.5.9, Community Builder 1.2, CB Paid Subscriptions (CB Subs) 1.0.3, CB Mailing 2.1, Legacy 1.0 plug-in enabled Mail Settings (Old Config): Mailer: SMTP Server Mail from: [email protected] From Name: CASPA Sendmail Path: /usr/sbin/sendmail SMTP Authentication: Yes SMTP Username: [email protected] SMTP Password: xxxxxxx SMTP Host: 209.48.40.194 (Notice how the older version of Joomla is missing the 2 fields: SMTP Security and SMTP Port) Thanks in advance!

    Read the article

  • When connecting to PPTP Centos via Windows 7 VPN, I get error 2147943625

    - by Charlie Dyason
    The remote computer refused the network connection. phrase has been my arch enemy for the past week now I recently "bought" a VPS server, I gave up trying to configure it with OpenVPN, all the issues were making me lose my mind, so I tried the easier way with pptp, but i figure, both are leading to a dead end... I followed this post (many others too but this is the unlucky one), http://blog.secaserver.com/2011/10/install-vpn-pptp-server-centos-6/ and it all goes well with the setup, however, I run into this error when connecting to the VPN in Windows 7 here is a pic of the error: Image So I do not know what I have done wrong... When connecting, Code: Select all netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came I tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - iptables: # Generated by iptables-save v1.4.7 on Fri Nov 1 18:14:53 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [63:8868] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Fri Nov 1 18:14:53 2013 # Generated by iptables-save v1.4.7 on Fri Nov 1 18:14:53 2013 *nat : PREROUTING ACCEPT [96:12732] : POSTROUTING ACCEPT [0:0] : OUTPUT ACCEPT [31:2179] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Nov 1 18:14:53 2013 options.pptpd the only changes was the require-mppe # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 require-mppe # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} I check the iptables, everything is normal, all INPUTs, etc are before rejects, username and password I also checked in chap-secrets file, I am really puzzled...

    Read the article

  • Nginx + PHP-FPM Timeouts, almost zero load consumption?

    - by javipas
    I've got a server running on a Linode with Ubuntu 10.04 LTS, Nginx 0.7.65, MySQL 5.1.41 and PHP 5.3.2 with PHP-FPM. There is a WordPress blog on it, updated to WordPress 3.2.1 recently. I have made no changes to the server (except updating WordPress) and while it was running fine, a couple of days ago I started having downtimes. I tried to solve the problem, and checking the error_log I saw many timeouts and messages that seemed to be related to timeouts. The server is currently logging this kind of errors: 2011/07/14 10:37:35 [warn] 2539#0: *104 an upstream response is buffered to a temporary file /var/lib/nginx/fastcgi/2/00/0000000002 while reading upstream, client: 217.12.16.51, server: www.mydomain.com, request: "GET /page/2/ HTTP/1.0", upstream: "fastcgi://127.0.0.1:9000", host: "www.mydomain.com", referrer: "http://www.mydomain.com/" 2011/07/14 10:40:24 [error] 2539#0: *231 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 46.24.245.181, server: www.mydomain.com, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.mydomain.com", referrer: "http://www.google.es/search?sourceid=chrome&ie=UTF-8&q=mydomain" and even saw this previous serverfault discussion with a possible solution: to edit /etc/php/etc/php-fpm.conf and change request_terminate_timeout=30s instead of ;request_terminate_timeout= 0 The server worked for some hours, and then broke again. I edited the file again to leave it as it was, and restarted again php-fpm (service php-fpm restart) but no luck: the server worked for a few minutes and back to the problem over and over. The strange thing is, although the services are running, htop shows there is no CPU load (see image) and I really don't know how to solve the problem. The config files are on pastebin The php-fpm.conf file is here The /etc/nginx/nginx.conf is here The /etc/nginx/sites-available/www.mydomain.com is here Please help :(

    Read the article

  • Using my old PC as a web/file server?

    - by Garrett
    I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

    Read the article

  • Unable to browse to apache service, Service is running

    - by Jeff
    Summary I have a very peculiar problem. I am not able to open the "It Works!" page after installing a fresh server with apache. I am able to ssh to the box (from outside the network). Apache seems to be running on my Centos6.4x86_64 box just fine. Nothing useful in /var/logs/httpd/*. What am I missing? The setup I am outside the network right now. The "server" is a VM on my home computer running bridged mode. public ip: A.B.C.D Host: 192.168.1.5 VM: 192.168.1.8 I have a verizon fios router that is forwarding ports 22, 80, and 8888 to the VM. I am able to ssh over port 22, but I am not able to browse to the public URL over port 80. so A.B.C.D:22 is working, but http://A.B.C.D:80 is not. What I've tried nmap to see if it is listening: nmap -sT -O localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-25 11:10 EDT Nmap scan report for localhost (127.0.0.1) Host is up (0.000040s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 80/tcp open http 3306/tcp open mysql I tried going to it locally (lynx) and it does work. So, is the problem in my ports?

    Read the article

  • Can any postfix guru assist me determine how emails are still being sent via my server from unauthorized sources?

    - by Dave
    Hi all, I'm getting a little concerned as I run a small server hosting a number of websites and manage the email for a few dozen people. Just recently though I've had a couple of notifications from spamcop alerting me that spam has been sent from my server, and when I have a look over the logs from time to time I can indeed see that there are many repeated attempts of mail being sent from my server. Most of the time it gets knocked back from the destination servers but sometimes its getting through. Unfortunately I'm not linux or postfix expert, I can get by but had though I had my machine locked down quite securely, I don't allow relaying, when I check the online DNS/MX tools they tend to report my server as being OK so I'm not sure where to take it now and hoping someone might be able to throw me a few pointers. I get lots of entries like this in my MAIL.INFO log Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 66B88257C12F: from=<>, size=3116, nrcpt=1 (queue active) Jan 2 08:39:34 Debian-50-lenny-64-LAMP postfix/qmgr[15993]: 614C2257C1BC: from=<[email protected]>, size=2490, nrcpt=3 (queue active) and Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6471]: 0A316257C204: to=<[email protected]>, relay=none, delay=384387, delays=384384/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) Jan 7 16:09:37 Debian-50-lenny-64-LAMP postfix/error[6470]: 5848C257C20D: to=<[email protected]>, relay=none, delay=384373, delays=384370/3/0/0.01, dsn=4.0.0, status=deferred (delivery temporarily suspended: host mx.fakemx.net[46.4.35.23] refused to talk to me: 421 mx.fakemx.net Service Unavailable) then there tends to be connection timeouts, so from what I see even though I had relaying disabled.. something is getting by and trying to send.. So if you can help that will be greatly appreciated, and any further logging/config info I can supply. Thanks

    Read the article

  • netstat on fresh install of Solaris 10 update 9

    - by cjavapro
    I am attempting to decipher the below output bash-3.00$ netstat -a UDP: IPv4 Local Address Remote Address State -------------------- -------------------- ---------- *.sunrpc Idle *.* Unbound *.32771 Idle TCP: IPv4 Local Address Remote Address Swind Send-Q Rwind Recv-Q State -------------------- -------------------- ----- ------ ----- ------ ----------- *.* *.* 0 0 49152 0 IDLE *.sunrpc *.* 0 0 49152 0 LISTEN *.* *.* 0 0 49152 0 IDLE localhost.5987 *.* 0 0 49152 0 LISTEN localhost.898 *.* 0 0 49152 0 LISTEN localhost.32771 *.* 0 0 49152 0 LISTEN localhost.5988 *.* 0 0 49152 0 LISTEN localhost.32772 *.* 0 0 49152 0 LISTEN *.ssh *.* 0 0 49152 0 LISTEN *.32785 *.* 0 0 49152 0 BOUND localhost.6788 *.* 0 0 49152 0 LISTEN localhost.6789 *.* 0 0 49152 0 LISTEN localhost.32782 *.* 0 0 49152 0 LISTEN localhost.smtp *.* 0 0 49152 0 LISTEN localhost.submission *.* 0 0 49152 0 LISTEN server-host-name.ssh pc-host-name.51269 64868 51 49640 0 ESTABLISHED TCP: IPv6 Local Address Remote Address Swind Send-Q Rwind Recv-Q State If --------------------------------- --------------------------------- ----- ------ ----- ------ ----------- ----- *.* *.* 0 0 49152 0 IDLE *.ssh *.* 0 0 49152 0 LISTEN SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED Active UNIX domain sockets Address Type Vnode Conn Local Addr Remote Addr ffffffff84e25ab8 stream-ord ffffffff8569c740 00000000 /var/run/.inetd.uds bash-3.00$ It looks to me like we have the following items UDP IPv4 Open ports sunrpc, 32771 Question 1: What is *.* Unbound? TCP IPv4 Open ports sunrpc, ssh 10 ports open only for localhost The open ssh connection from my PC Question 2: What is *.32785 *.* 0 0 49152 0 BOUND? Question 3: What is *.* *.* 0 0 49152 0 IDLE? (shows up twice) IPv6 Open port ssh Question 3: What is *.* *.* 0 0 49152 0 IDLE? Question 4: What is SCTP? Question 5: What is Active UNIX domain sockets

    Read the article

  • Trouble with backslash characters and rsyslog writing to postgres

    - by Flimzy
    I have rsyslog 4.6.4 configured to write mail logs to a PostgreSQL database. It all works fine, until the log message contains a backslash, as in this example: Jun 12 11:37:46 dc5 postfix/smtp[26475]: Vk0nYDKdH3sI: to=<[email protected], relay=----.---[---.---.---.---]:25, delay=1.5, delays=0.77/0.07/0.3/0.35, dsn=4.3.0, status=deferred (host ----.---[199.85.216.241] said: 451 4.3.0 Error writing to file d:\pmta\spool\B\00000414, status = ERROR_DISK_FULL in "DATA" (in reply to end of DATA command)) The above is the log entry, as written to /var/log/mail.log. It is correct. The trouble is that the backslash characters in the file name are interpreted as escapes when sent to the following SQL recipe: $template dcdb, "SELECT rsyslog_insert(('%timereported:::date-rfc3339%'::TIMESTAMPTZ)::TIMESTAMP,'%msg:::escape-cc%'::TEXT,'%syslogtag%'::VARCHAR)",STDSQL :syslogtag, startswith, "postfix" :ompgsql:/var/run/postgresql,dc,root,;dcdb As a result, the rsyslog_insert() stored procedure gets the following value for as msg: Vk0nYDKdH3sI: to=<[email protected], relay=----.---[---.---.---.---]:25, delay=1.5, delays=0.77/0.07/0.3/0.35, dsn=4.3.0, status=deferred (host ----.---[199.85.216.241] said: 451 4.3.0 Error writing to file d:pmtaspoolB The \p, \s, \B and \0 in the file name are interpreted by PostgreSQL as literal p, s, and B followed by a NULL character, thus early-terminating the string. This behavior can be easiily confirmed with: dc=# SELECT 'd:\pmta\spool\B\00000414'; ?column? -------------- d:pmtaspoolB (1 row) dc=# Is there a way to correct this problem? Is there a way I'm not finding in the rsyslog docs to turn \ into \\?

    Read the article

  • iptables port forward + nginx redirect problem

    - by easthero
    Here is my network browser = proxy(iptables port forward) = nginx server proxy: 192.168.10.204, forward 192.168.10.204:22080 to 192.168.10.10:80 nginx server: 192.168.10.10 nginx version:0.7.65 debian testing in nginx settings, I set: server_name _; server_name_in_redirect off; because my server has no domain now, access 192.168.10.10/index.html or 192.168.10.10/foobar is ok then access 192.168.10.204:22080/index.html is ok but access 192.168.10.204:22080/foobar, nginx 301 redirect to http://192.168.10.204/foobar how to fix? thanks telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /index.html HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 200 OK Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:07:29 GMT Content-Type: text/html Content-Length: 12 Last-Modified: Fri, 28 May 2010 07:25:12 GMT Connection: keep-alive Accept-Ranges: bytes hello world telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /test2 HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 301 Moved Permanently Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:04:20 GMT Content-Type: text/html Content-Length: 185 Location: http://192.168.10.10/test2/ Connection: keep-alive <html> <head><title>301 Moved Permanently</title></head> <body bgcolor="white"> <center><h1>301 Moved Permanently</h1></center> <hr><center>nginx/0.7.65</center> </body> </html>

    Read the article

  • Postfix: Modify sender address based on recipient

    - by PJ P
    We have a Postfix server that receives mail from our application servers. Senders are in the form [email protected] (where host.fqdn can vary, depending on source server) and recipients can be internal or external users. Messages going to external users should have the sender changed to [email protected]. I have tried using canonical maps, but since that is handled by the cleanup daemon, before any transport decisions are made, it would affect all sender addresses. I have also tried creating a custom smtp transport with generic mappings and configuring transport_maps to use that custom smtp transport for external domains. However, generic mappings affect both sender and recipient addresses. Lastly, I've tried the following: Create a custom smtpd daemon that specifies sender canonical maps and a unique transport table. Send all externally addressed mail to that custom daemon. Ideally, sender canonical maps would transform the sender address and the unique transport table would relay messages to the internet. However, evidently, only one transport table can be used per Postfix instance. I want to avoid creating an entirely new Postfix instance to accommodate this rewriting. Any suggestions? (and thanks in advance)

    Read the article

  • gcc built by crosstool-ng gives undefined reference

    - by netvope
    I've successfully built a toolchain using crosstool-ng with the default configuration named x86_64-unknown-linux-gnu. The documentation says: Using the toolchain is as simple as adding the toolchain's bin directory in your PATH, such as: export PATH="${PATH}:/your/toolchain/path/bin" and then using the target tuple to tell the build systems to use your toolchain: ./configure --target=your-target-tuple or make CC=your-target-tuple-gcc or make CROSS_COMPILE=your-target-tuple- and so on... I followed the instructions and attempted to build GNU tar (tar-1.25.tar.bz2) with the toolchain. The commands ./configure --target=x86_64-unknown-linux-gnu and make CROSS_COMPILE=x86_64-unknown-linux-gnu- do not work (the build will succeed, but it uses the host system's gcc). The command make CC=x86_64-unknown-linux-gnu-gcc works, but in the very last step when it tries to link, it returns errors like this: compare.o: In function `openat': /dev/shm/x-tools/x86_64-unknown-linux-gnu/x86_64-unknown-linux-gnu/sys-root/usr/include/bits/fcntl2.h:134: undefined reference to `__openat_2' What could be the problem? Was the toolchain not properly setup? Perhaps x86_64-unknown-linux-gnu-gcc is using the header files from the host system but could not find the libraries in the target's sys-root?

    Read the article

  • Problems configuring logstash for email output

    - by user2099762
    I'm trying to configure logstash to send email alerts and log output in elasticsearch / kibana. I have the logs successfully syncing via rsyslog, but I get the following error when I run /opt/logstash-1.4.1/bin/logstash agent -f /opt/logstash-1.4.1/logstash.conf --configtest Error: Expected one of #, {, ,, ] at line 23, column 12 (byte 387) after filter { if [program] == "nginx-access" { grok { match = [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} [%{HTTPDATE:time_local}] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded = false host = " Here is my logstash config file input { syslog { type => syslog port => 5544 } } filter { if [program] == "nginx-access" { grok { match => [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} \[% {HTTPDATE:time_local}\] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded => false host => "localhost" cluster => "cluster01" } email { from => "[email protected]" match => [ "Error 504 Gateway Timeout", "status,504", "Error 404 Not Found", "status,404" ] subject => "%{matchName}" to => "[email protected]" via => "smtp" body => "Here is the event line that occured: %{@message}" htmlbody => "<h2>%{matchName}</h2><br/><br/><h3>Full Event</h3><br/><br/><div align='center'>%{@message}</div>" } } I've checked line 23 which is referenced in the error and it looks fine....I've tried taking out the filter, and everything works...without changing that line. Please help

    Read the article

  • NRPE: Unable to read output with check_connections plugin

    - by Wlodzimierz
    I'm using plugin which gives me warning or crtis with established connections. If I run it on local machine it gives: *root@graber:/usr/lib/nagios/plugins# ./check_connections -w 1 -c 5 -C sshd CRITICAL Established connections: 6* I know, I run as root. But: Rights to the file: root@graber:/usr/lib/nagios/plugins# ls -all check_connections -rwxr-xr-x 1 nagios nagios 5459 2012-07-06 10:19 check_connections /etc/sudoers: root@graber:/usr/lib/nagios/plugins# cat /etc/sudoers Defaults env_reset root ALL=(ALL:ALL) ALL %admin ALL=(ALL) ALL nagios ALL=(ALL) NOPASSWD: /usr/bin/lsof nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ /etc/nagios/nrpe.cfg: *nrpe_user=nagios nrpe_group=nagios* *dont_blame_nrpe=1* *command_prefix=/usr/bin/sudo command[check_connections]=/usr/lib/nagios/plugins/check_connections -w 1 -c 5 -C sshd* log from remote: *2012-07-06T11:12:49+02:00 graber nrpe[25928]: Handling the connection... 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Host address is in allowed_hosts 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Host is asking for command 'check_connections' to be run... 2012-07-06T11:12:49+02:00 graber nrpe[25928]: Running command: /usr/lib/nagios/plugins/check_connections -w 1 -c 5 -C sshd 2012-07-06T11:19:11+02:00 graber nrpe[26100]: Return Code: 2, Output: NRPE: Unable to read output* Why is this happening? I'm out of ideas, I've searched google for 2 days now :)

    Read the article

  • Networking 2 Virtual PC with one VPC as DHCP server

    - by vivek
    My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

    Read the article

  • esxi 5 monitoring

    - by user134880
    I'm new to esxi/vmware world. Have few question about monitoring esxi host. Now I'm using trial versian esxi 5.1 I can see performance charts in vShpere client. Cool. But I want to export this raw data (raw - I mean cvs,txt or some format which I can parse later) to other server to be able to parse this data later and create custom charts. (please do not advise to try vCenter, I need custom charts etc.) I could run esxtop in batch mode and use this data... But... How does vShpere client performance charts work? Where client takes data for charts? So if I will use esxtop batch mode it will add extra load to server. Is it possible to use same source as vSphere client use for charts? There is /var/lib/vmware/hostd/stats/hostAgentStats-20.stats file. Its looks like it is binary format. As I understood it is exactly data which I need?!?! Any ideas how to parse it? Thanks! PS: maybe some one know where to find, if there is one, info about processes running on esxi host?

    Read the article

  • SQL Error (1064) when importing data from SQL file

    - by mejpark
    I have a MySQL database, which was originally set up with the default latin1 character set and latin1_swedish_ci collation. I was using the database like this for sometime, until I noticed strange characters on my production web site, which is powered by a database exported from my development machine. At this point, I changed the default character set of the database and tables to utf8 and the collation to utf8_unicode_ci, converted the latin1 data inside each table to utf8 (using the 'convert data' option) and exported the database as a single SQL file using HeidiSQL. When the resulting SQL file is opened in Notepad++, several characters are rendered incorrectly. For example, en dashes (-) are displayed as – and e with accent (é) are displayed as é. I changed the encoding of the file from ANSI to UTF-8 (using the encoding menu option in Notepad++) and the offending characters are rendered correctly. I saved the new utf8-encoded SQL file and attempted to import the contents into the MySQL database on my production server. The import process fails with following error: /* SQL Error (1064): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?# -------------------------------------------------------- # Host: ' at line 1 */ /* Error with snippets directory: The specified path was not found */ The head of the SQL file: # -------------------------------------------------------- # Host: 127.0.0.1 # Server version: 5.1.33-community # Server OS: Win32 # HeidiSQL version: 6.0.0.3773 # Date/time: 2011-04-20 09:48:36 # -------------------------------------------------------- It chokes on the first line of the file, which is commented out. Why is this happening? I didn't have a problem loading data from SQL files until I changed the character set and collation of the database. I came up with an ugly workaround to this problem by performing following steps: Export database as single SQL file using HeidiSQL Open resulting file in Notepad++ and convert from ANSI to UTF-8 encoding Create new empty file in Notepad++, paste in UTF-8 and save file normally What am I missing here?

    Read the article

  • Use Apache authentication + authorization to control access to Subversion subdirectories

    - by Stefan Lasiewski
    I have a single SVN repo at /var/svn/ with a few subdirectories. Staff must be able to access the top-level directory and all subdirectories within it, but I want to restrict access to subdirectories using alternate htpasswd files. This works for our Staff. <Location /> DAV svn SVNParentPath /var/svn AuthType Basic AuthBasicProvider ldap # mod_authnz_ldap AuthzLDAPAuthoritative off AuthLDAPURL "ldap.example.org:636/ou=people,ou=Unit,ou=Host,o=ldapsvc,dc=example,dc=org?uid?sub?(objectClass=PosixAccount)" AuthLDAPGroupAttribute memberUid AuthLDAPGroupAttributeIsDN off Require ldap-group cn=staff,ou=PosixGroup,ou=Unit,ou=Host,o=ldapsvc,dc=example,dc=org </Location> Now, I am trying to restrict access to a subdirectory with a separate htpasswd file, like this: <Location /customerA> DAV svn SVNParentPath /var/svn # mod_authn_file AuthType Basic AuthBasicProvider file AuthUserFile /usr/local/etc/apache22/htpasswd.customerA Require user customerA </Location> I can use Firefox and curl to browse to this folder fine: curl https://svn.example.org/customerA/ --user customerA:password But I cannot use check out this SVN repository: $ svn co https://svn.example.org/customerA/ svn: Repository moved permanently to 'https://svn.example.org/customerA/'; please relocate And on the server logs, I get this strange error: # httpd-access.log 192.168.19.13 - - [03/May/2010:16:40:00 -0700] "OPTIONS /customerA HTTP/1.1" 401 401 192.168.19.13 - customerA [03/May/2010:16:40:00 -0700] "OPTIONS /customerA HTTP/1.1" 301 244 # httpd-error.log [Mon May 03 16:40:00 2010] [error] [client 192.168.19.13] Could not fetch resource information. [301, #0] [Mon May 03 16:40:00 2010] [error] [client 192.168.19.13] Requests for a collection must have a trailing slash on the URI. [301, #0] My question: Can I restrict access to Subversion subdirectories using Apache access controls? DocumentRoot is commented out, so it's not clear that the FAQ at http://subversion.apache.org/faq.html#http-301-error applies.

    Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >