Search Results

Search found 18860 results on 755 pages for 'enigma machine'.

Page 224/755 | < Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >

• Snow Leopard Windows 7 File sharing issue

  - by nsiggel

  Hello, wondering if anyone might have any suggestions on how to fix this issue in file sharing between Snow Leopard and Windows 7. On my home network, I have a system running windows 7 which acts as a file server: \WINDOWS7-A\SHARE I also have an IMac which can access the file share most of the time.... however now comes the problem, as soon as I introduce my Windows 7 Laptop and copy files over from it onto the file server (\Windows7-A), the file server become no longer accessible from the Snow Leopard machine... I assume this somehow has to do with elevated security on the network share having been negotiated between the 2 Windows 7 machines which is no longer allowing the Mac to see the Windows machines... but not sure how to disable this, as the only way I can restore communication between the mac and the Windows 7 machine is to restart it... less than ideal... Any suggestions would be welcome.

  Read the article

• iPhone VPN to iTunes Home Sharing [migrated]

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• What Filesystem should be used for a 4TB drive for both Windows and OSX compatibility? [closed]

  - by Nicholas Yost

  Note: I am aware of similar questions. The one's I seen here are for Windows, OSX, and Linux (which I do not need). I also can use Mountain Lion, which the other questions did not mention. I was going to use NTFS, but OSX Mountain Lion can only read that filesystem and not write to it for some reason. I want to use something native between OSX and Windows, as I don't want to risk losing the data over filesystem incompatibilities. I have USB 3.0 and want something that will allow files greater than 4GB. I do not mind installing a small set of drivers on the Windows machine(s), but I would strongly prefer to leave the Mac machine untouched. Thanks!

  Read the article

• Remote Desktop Multi Monitor Connection

  - by user196039

  This question may be a bit unusual but I think it's an interesting angle: Why does a remote desktop connection to my server with all four of my 30 inch (@2560x1600) monitors work, even though the server doesn't have a graphics card installed? I guess the graphics are perhaps not really rendered on the server? What exactly happens there so that this works? Searching for this I mostly found "how to enable multi monitor support" but not an answer to my question yet. Any links/documentation I can read to understand this better? (To get all four monitors working well on my local machine the one graphics card I had wasn't even enough, so I have two graphics cards on the local machine now) The operating systems are Windows 7 home premium and it's a Windows Server 2008 R2.

  Read the article

• How to deploy Windows-8 Enterprise Apps to other users?

  - by TToni

  Windows-8 (Metro) Apps can be installed using "sideloading", bypassing the Windows store in enterprise environments. In principle this is easy: Once you enabled sideloading (which is automatically done when a Win8-machine joins a domain), you can install a signed appx-Package through PowerShell with the "Add-AppxPackage" command. But there is a catch: The App is only installed for the user who executes the command and there is no "-Credentials" parameter! I can probably solve that problem in my specific scenario, where I deploy a self-developed app through TFS build to a virtual machine with a fixed demo user (by using remote powershell in combination with "Add-Job", which does take a credential parameter and because I know the given username and the password). But that is not true in an enterprise environment, where I want to distribute my App to thousands of users. Cracking all their passwords seems a bit over the top, so what would be the "correct" way to do this? I can't find any useful information from Microsoft about this, but maybe one of you already ran into this problem and solved it?

  Read the article

• OSX : Setup for filestorage in medium business

  - by Franatique

  In our office every machine runs OSX. In search of an ideal storage and sharing solution we decided to let OSX Server handle all account information and auth requests whereas an 7TB QNAP provides NFS shares. All shares are published as mounts in the companywide LDAP. As it turns out, handling permissions in this situation is very clumsy (e.g. inherit permissions on newly created files). Unfortunately using NFS4 in combination with ACLs did not solve the problem. As a possible solution I set up a iSCSI connection between QNAP and the machine running OSX Server which in turn serves the LUN as AFP share. Permission handling works like a charm for this setup. Although I am a bit concerned about the performance of this setup. As we are a fast growing company we expect the solution to serve at least 100 clients while using files aprox. above 100MB each. Are there any known drawbacks of this solution?

  Read the article

• recovering vm data from crashed XenServer install

  - by user58983

  We're using xenserver 5.6 from citrix to run our virtual machines. The box is old and creaky, and the hard drive went. (We had a super limited budget of $0 at the time). Turns out the only machine on there we actually needed, was the only one not backed up... anyway, we've replace the hard drive, and reinstalled xensever. however while trying to find our old vm disk images, i have no idea where they sit, and i'm beginning to think they're on a lvm partition? is there anyway to access the disk images from the old vm's on this hard disk, which is attached to the xenserver machine via a usb-sata converter?

  Read the article

• how to monitor traffic at port 53 (DNS)

  - by Registered User

  I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

  Read the article

• who deleted my files?

  - by akalter

  I have some linux servers. On two of our server we have MySQL. We have daily backup on both machine. But the scripts are different. I saw both scripts. On one of them I saw the "delete older files" algorithm, but in the other this is happening but not from the script. I am trying to discover who deletes my files, because of that I want to use same script on both machine because of that in the script with the deletion I also copy the files to the another server, and I want to do that in both servers. Who have an idea who deleted my older backups? Thank you!

  Read the article

• Default profile for large

  - by user63434

  Hi I am setting up a master image to clone to all same machine type Windows 7 client, I login as administrastor and installed all the programs and changed the desktop settings etc, but my local administrator profile is 244megs in size, which will become the default profile of the local machine when sysprep, we have a 2003 server that I want to use mandatory profile for all login users which means I need to copy this profile to the server so when any users login to the domain they are using this profile, loading a 244megs profile is going to be very slow since it will be removed from the client when they logoff. So next time they login it will take a long time again. Is there anything I can do, can I just copy just the bare minimum files from the default profile to the server, as I am not sure what parts I need, I read that I must copy my documents, my documents/pictures so the folder redirection will work. What else do I need to copy to the server? I have firefox xmark sync also and MS words etc. THanks

  Read the article

• Windows xp keeps rebooting itself every morning at 8am?

  - by mark

  Hi, I've got windows xp sp3. It seems to restart itself every morning at 8am (judging by the windows logs, I can see all apps log a startup at 8am every day). Whenever I get to the machine in the morning (around 9 am) I see it's rebooted. I've checked that automatic updates are off, and that the power management settings are set to "always on". I'm not sure what else could be causing the machine to reboot, not sure where to start looking. Any ideas? Thanks ---------- update ---------------- Just looking at the Event Viewer, I see a log message at 8:00:47am every day, which looks like a reboot log statement: Microsoft (R) Windows (R) 5.01.2600 Service Pack 3 Multiprocessor Free. For more information, see Help and Support Center at ...

  Read the article

• Enable group policy for everything but the SBS?

  - by Jerry Dodge

  I have created a new group policy to disable IPv6 on all machines. There is only the one default OU, no special configuration. However, this policy shall not apply to the SBS its self (nor the other DC at another location on a different subnet) because those machines do depend on IPv6. All the rest do not. I did see a recommendation to create a new OU and put that machine under it, but many other comments say that is extremely messy and not recommended - makes it high maintenance when it comes to changing other group policies. How can I apply this single group policy to every machine except for the domain controllers? PS - Yes, I understand IPv6 will soon be the new standard, but until then, we have no intention to implement it, and it in fact is causing us many issues when enabled.

  Read the article

• Should I bother upgrading my Opteron 270 Server?

  - by MousePad

  I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• Database Insider - December 2012 issue

  - by Javier Puerta

  The December issue of the Database Insider newsletter is now available. (Full newsletter here) Big Data: From Acquisition to Analysis 2012 will likely be remembered as the year of big data, as a new generation of technologies enables organizations to acquire, organize, and analyze the exponentially growing and typically less-structured data generated from a variety of new sources. Oracle has produced a series of five short videos that offer a quick and compelling high-level introduction to big data. Read More Total Cost of Ownership Comparison: Oracle Exadata vs. IBM P-Series Read the research that found that over three years, the IBM hardware running Oracle Database cost 31 percent more in total cost of ownership than Oracle Exadata. Webcast - Oracle Exadata Database Machine X3 Learn about Oracle’s next-generation database machine, Oracle Exadata X3, that combines massive memory and low-cost disks to deliver the highest performance at the lowest cost. Available in an eight-rack configuration, it allows you to start small and grow.    Maximum Availability with Oracle GoldenGate Discover how to eliminate not only unplanned downtime but also planned downtime resulting from database upgrades, migrations, and consolidation.Thursday, December 1319:00 CET / 6 pm. UK   

  Read the article

• How do I edit files in the console when connecting to windows 7 via ssh?

  - by Alex Waters

  I am using tunnelier client and server to connect to a windows machine. I can get in and have access to all of the files on the computer. I have vim installed on that windows machine, but I can't seem to edit anything via the DOS command line. I also tried editing in notepad, but nothing happens when I enter the command. I think this might be the part where DOS doesn't behave like bash. Would I need to setup cygwin / openssh to accomplish this? (boo, tunnelier is so easy) Thanks! p.s. I know I could just use sftp and edit files that way, but it feels dirty.

  Read the article

• Ubuntu 11.10 Random reboots how to find root cause?

  - by Indigo42

  All, This issue started with 11.04, I upgraded to 11.10 this week in hopes it would correct it, but after a few days it happened again.. A few times a day, randomly, my monitors will go black and the machine will come back in the post screen and boot up again. Sometimes it boots up properly, sometimes it boots to disk scan (I understand why...the machine just died with a bunch of stuff open) and sometimes it takes several cycles of this to come up. I connected to the system with my laptop and tailed dmesg, syslog, kern.log, and Xorg.0.log. I also ran a cat /proc/kmesg. Nothing is showing up in any of these log files when it happens..it's just like someone has pulled the plug. I just got through running 4 hours of the memory test with no errors. I have a AMD Phenom 9850 Quad-Core Processor and Nvida 9500GT graphics card. This system has been stable for like 4 years. I'm thinking it might be a hardware problem, but how do I find out? Thanks,

  Read the article

• Is this too much to ask for a game programming and developing enthusiast? Am I doing this wrong?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• ssl problems between two tomcat servers

  - by user1058410

  I've got one tomcat 7 server(kind of like a web server) trying to talk to a tomcat 6 server(acting as a document server on another machine) over ssl and keep getting this error java.security.cert.CertificateException: No name matching rarity64 found. Where rarity64 is the name of the document server. I've tried exporting keys from both tomcats keystores and importing them into the others keystores using java keytool. I've even tried adding them to the other machines cacerts keystore. I've also used internet explorer to import both keys into the other machine. But nothing I try works. If it matters the real webserver is IIS 7.5, which the tomcat "webserver" talks too with arr, and they don't use SSL. But the problem seems to between the two tomcat servers

  Read the article

• Continue process after closing terminal?

  - by Jakobud

  Recently, I tried to unzip a 30 gig zip file on a remote system using Putty. As the long unzipping process continued, I closed Putty, assuming that the process would just continue to run on the remote machine. When I came back later and logged back into the machine again, I realized that the process must have stopped only part way through when I closed Putty. I wasn't expecting that to happen. My question is, how do I prevent this problem? Can I somehow fire off a process in the background? Or should just setup a one time cronjob that will run the process for me?

  Read the article

• How to check for a valid computer certificate with NAP

  - by Tie-fighter

  What has one to do in order to check for a valid machine certificate via Microsoft's NAP?

  Read the article

• Windows 8 Task Manager RAM Usage Accuracy

  - by user264892

  The new Task Manager has a great UI in windows 8, however, there are some discrepancies in the data I can not account for: Machine: 8 GB of total ram. (This is a physical machine, not a virtual) The processes tab shows 45% of Memory utilized. The listed process do not add up to 3.5 GB of RAM, but instead add up to 0.948 GB. There is no "processes for all users" option. The performance Tab Shows: In use : 3.6 GB Available: 4.4 GB Committed : 4.1 /9.2 GB Cached: 3.7 GB Paged Pool: 376 MB Non-paged pool: 135 MB My reading of this says I have ALOT of "cloaked" processes running some where eating my ram. How do I interpret this data and how do I verify it?

  Read the article

• Too many files open issue (in CentOS)

  - by Ram

  Recently I ran into this issue in one of our production machines. The actual issue from PHP looked like this: fopen(dberror_20110308.txt): failed to open stream: Too many open files I am running LAMP stack along with memcache in this machine. I also run a couple of Java applications in this machine. While I did increase the limit on the number of files that can be opened to 10000 (from 1024), I would really like to know if there is an easy way to track this (# of files open at any moment) as a metric. I know lsof is a command which will list the file descriptors opened by processes. Wondering if there is any other better (in terms of report) way of tracking this using say, nagios.

  Read the article

• Apache redirect some requests to another server

  - by mucie

  We just bought a new server. We want our old server to respond the https connections(because of ssl certificate) and new server to respond the rest. New server is ready but i don't know how to redirect requests to new one. mydomain.com => old machine ip 10.10.10.41 => new machine Requests will come through mydomain.com. If it is https: respond else redirect to 10.10.10.41 How should i configure apache for this situation?

  Read the article

• Change domain password from non-domain computer (AD)

  - by Josh

  I have a domain controller on Windows Server 2008. When I set up my users, I gave them all a dummy password with the "must change on next login" checked. Everyone's machine is all on the same network as the domain controller, but we are not forcing them to join their computers to the domain. The DC has a website which requires the use of domain accounts to access it. How do I tell my users to change their domain passwords without connecting their PC to the domain or making them log in to a machine on the domain? I do not want anything I will have to install on each client to allow them to change their passwords (I have a password expiration policy). Most of these workstations are XP.

  Read the article

< Previous Page | 220 221 222 223 224 225 226 227 228 229 230 231  | Next Page >